Articoli di riviste sul tema "Critical stress intensity factor"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Critical stress intensity factor".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Dharmarajan, N., e C. Vipulanandan. "Critical stress intensity factor of epoxy mortar". Polymer Engineering and Science 28, n. 18 (settembre 1988): 1182–91. http://dx.doi.org/10.1002/pen.760281808.
Testo completoDaud, M. A. M., Zainuddin Sajuri, Mohd Zaidi Omar e Junaidi Syarif. "Critical Stress Intensity Factor Determination for AZ61 Magnesium Alloy". Key Engineering Materials 462-463 (gennaio 2011): 1121–26. http://dx.doi.org/10.4028/www.scientific.net/kem.462-463.1121.
Testo completoZarzycki, J. "Critical stress intensity factors of wet gels". Journal of Non-Crystalline Solids 100, n. 1-3 (marzo 1988): 359–63. http://dx.doi.org/10.1016/0022-3093(88)90046-4.
Testo completoZheng, Heng Xiang, e Cai Ying Chen. "Research on Interface Critical Fracture of Different Materials Based on Critical Fracture Curve". Applied Mechanics and Materials 204-208 (ottobre 2012): 3090–93. http://dx.doi.org/10.4028/www.scientific.net/amm.204-208.3090.
Testo completoSATO, Kiyoshi, Hisato YAMAMOTO, Atsushi TAYA e Hiroyuki OKUYAMA. "Influence of Moisture Content on Critical Stress Intensity Factor of Wood." Journal of the Society of Materials Science, Japan 49, n. 4 (2000): 365–67. http://dx.doi.org/10.2472/jsms.49.365.
Testo completoMeriem-Benziane, Madjid, Gadi Ibrahim, Zahloul Hamou e BelAbbes Bachir-Bouiadjra. "Stress intensity factor investigation of critical surface crack in a cylinder". Advances in Materials and Processing Technologies 1, n. 1-2 (3 aprile 2015): 36–42. http://dx.doi.org/10.1080/2374068x.2015.1111702.
Testo completoYoshihara, Hiroshi. "Simple estimation of critical stress intensity factors of wood by tests with double cantilever beam and three-point end-notched flexure". Holzforschung 61, n. 2 (1 marzo 2007): 182–89. http://dx.doi.org/10.1515/hf.2007.032.
Testo completoAnam, Khairul, e Chih Kuang Lin. "Thermal Stress Intensity Factors of Crack in Solid Oxide Fuel Cells". Applied Mechanics and Materials 493 (gennaio 2014): 331–36. http://dx.doi.org/10.4028/www.scientific.net/amm.493.331.
Testo completoAbuzaid, Ahmed, Meftah Hrairi e Mohd Sultan Dawood. "Mode I Stress Intensity Factor for a Cracked Plate with an Integrated Piezoelectric Actuator". Advanced Materials Research 1115 (luglio 2015): 517–22. http://dx.doi.org/10.4028/www.scientific.net/amr.1115.517.
Testo completoToribio, J., F. J. Ayaso, B. González, J. C. Matos, D. Vergara e M. Lorenzo. "Critical stress intensity factors in steel cracked wires". Materials & Design 32, n. 8-9 (settembre 2011): 4424–29. http://dx.doi.org/10.1016/j.matdes.2011.03.064.
Testo completoAdams, George G. "Critical value of the generalized stress intensity factor for a crack perpendicular to an interface". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 471, n. 2183 (novembre 2015): 20150571. http://dx.doi.org/10.1098/rspa.2015.0571.
Testo completoMitchell, DMR, e ER Abril. "The Influence of Initial Crack Length on Critical Stress Intensity Factor K1". Journal of Testing and Evaluation 34, n. 5 (2006): 12660. http://dx.doi.org/10.1520/jte12660.
Testo completoNazmus Sakib, A. R., e Ashfaq Adnan. "On the size-dependent critical stress intensity factor of confined brittle nanofilms". Engineering Fracture Mechanics 86 (maggio 2012): 13–22. http://dx.doi.org/10.1016/j.engfracmech.2012.02.003.
Testo completoStupishin, Leonid, Victor Kabanov e Aleksander Masalov. "Fracture Resistance of Bended Glued Timber Elements with Flaws". Advanced Materials Research 988 (luglio 2014): 363–66. http://dx.doi.org/10.4028/www.scientific.net/amr.988.363.
Testo completoVasovic, Ivana, Stevan Maksimovic, Katarina Maksimovic, Slobodan Stupar, Gordana Bakic e Mirko Maksimovic. "Determination of Stress Intensity Factors in Low Pressure Turbine Rotor Discs". Mathematical Problems in Engineering 2014 (2014): 1–9. http://dx.doi.org/10.1155/2014/304638.
Testo completoVAKULENKO, Igor, Svetlana PROYDAK e Hangardas ASKEROV. "The calculation of stress intensity factor steel of railway wheels". Scientific Journal of Silesian University of Technology. Series Transport 109 (1 dicembre 2020): 187–93. http://dx.doi.org/10.20858/sjsutst.2020.109.17.
Testo completoSundaresan, S., e B. Nageswara Rao. "Stress Intensity at the Initiation of Instability by R Curve". Applied Mechanics and Materials 592-594 (luglio 2014): 1160–64. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.1160.
Testo completoChen, Teng Hui. "Fracture Analysis for Attaching Fiber Reinforced Composite on V-Notch Wedge Structure". Materials Science Forum 909 (novembre 2017): 133–42. http://dx.doi.org/10.4028/www.scientific.net/msf.909.133.
Testo completoTumanov, A. V., e N. V. Boychenko. "Interpretation of the generalized parameter of the probability of failure through the plastic stress intensity factor". PNRPU Mechanics Bulletin, n. 1 (15 dicembre 2021): 86–94. http://dx.doi.org/10.15593/perm.mech/2021.1.09.
Testo completoZebri, O., H. El Minor e A. Bendarma. "Evolution of Tenacity in Mixed Mode Fracture – Volumetric Approach". Mechanics and Mechanical Engineering 22, n. 4 (2 settembre 2020): 931–38. http://dx.doi.org/10.2478/mme-2018-0073.
Testo completoFang, Qiang. "A Comparative Study of Delayed Hydride Cracking in Zr-3.5Sn-0.8Nb-0.8Mo and Zr-2.5Nb". Materials Science Forum 917 (marzo 2018): 207–11. http://dx.doi.org/10.4028/www.scientific.net/msf.917.207.
Testo completoChasiotis, I., S. W. Cho e K. Jonnalagadda. "Fracture Toughness and Subcritical Crack Growth in Polycrystalline Silicon". Journal of Applied Mechanics 73, n. 5 (10 dicembre 2005): 714–22. http://dx.doi.org/10.1115/1.2172268.
Testo completoAMAGAI, Masazumi. "The Effect of Polyimide Surface Chemistry and Morphology on Critical Stress Intensity Factor." Journal of Japan Institute of Electronics Packaging 3, n. 7 (2000): 569–77. http://dx.doi.org/10.5104/jiep.3.569.
Testo completoYew, C. H., e G. H. Liu. "The Fracture Tip and Critical Stress Intensity Factor of a Hydraulically Induced Fracture". SPE Production & Facilities 8, n. 03 (1 agosto 1993): 171–77. http://dx.doi.org/10.2118/22875-pa.
Testo completoVINCENT, J. F. V., D. E. J. SAUNDERS e P. BEYTS. "THE USE OF CRITICAL STRESS INTENSITY FACTOR TO QUANTIFY "HARDNESS" AND "CRUNCHINESS" OBJECTIVELY". Journal of Texture Studies 33, n. 2 (luglio 2002): 149–59. http://dx.doi.org/10.1111/j.1745-4603.2002.tb01341.x.
Testo completoAmagai, Masazumi. "The effect of polyimide surface chemistry and morphology on critical stress intensity factor". Microelectronics Reliability 40, n. 12 (dicembre 2000): 2077–86. http://dx.doi.org/10.1016/s0026-2714(00)00024-x.
Testo completoBrandt, A. M., e G. Prokopski. "Critical values of stress intensity factor in mode II fracture of cementitious composites". Journal of Materials Science 25, n. 8 (agosto 1990): 3605–10. http://dx.doi.org/10.1007/bf00575395.
Testo completoSARACOGLU, Goksel. "Using the Stress Concentration Factor in Determining the Fracture Toughness". Mechanics 28, n. 5 (21 ottobre 2022): 358–63. http://dx.doi.org/10.5755/j02.mech.31226.
Testo completoPurba, Muhammad Rafi, Tulus Tulus, M. R. Syahputra e Sawaluddin Sawaluddin. "IMPLEMENTATION OF EXTENDED FINITE ELEMENT METHOD IN CRACK PROPAGATION OF CONCRETE". Journal of Fundamental Mathematics and Applications (JFMA) 5, n. 1 (1 luglio 2022): 1–8. http://dx.doi.org/10.14710/jfma.v5i1.14454.
Testo completoOsaretin, Meshach, Sylvester Onyemaechi Edelugo, Patrick Udeme Akpan, Cornelius Ogbodo Anayo Agbo, Paul Amaechi Ozor e Nita Inderlal Sukdeo. "Stress Intensity Factor of E-Glass Fiber Reinforced Polyester Composites". Materials Science Forum 1115 (29 febbraio 2024): 9–19. http://dx.doi.org/10.4028/p-nld6we.
Testo completoKravchuk, Andriy, e Ievgen Kondriakov. "Determination of fracture toughness for steel 22k from the results of tests of different types specimens". Bulletin of the National Technical University «KhPI» Series: New solutions in modern technologies, n. 3(9) (18 ottobre 2021): 20–25. http://dx.doi.org/10.20998/2413-4295.2021.03.03.
Testo completoNáhlík, Luboš, Kateřina Štegnerová, Pavel Hutař e Zdeněk Majer. "Critical Value for Crack Propagation from Sharp V-Notch". Key Engineering Materials 592-593 (novembre 2013): 177–80. http://dx.doi.org/10.4028/www.scientific.net/kem.592-593.177.
Testo completoYoung, A., D. P. Rooke e D. J. Cartwright. "Numerical study of balanced patch repairs to cracked sheets". Aeronautical Journal 93, n. 929 (novembre 1989): 327–34. http://dx.doi.org/10.1017/s0001924000017255.
Testo completoKiciak, A., G. Glinka e D. J. Burns. "Calculation of Stress Intensity Factors and Crack Opening Displacements for Cracks Subjected to Complex Stress Fields". Journal of Pressure Vessel Technology 125, n. 3 (1 agosto 2003): 260–66. http://dx.doi.org/10.1115/1.1593080.
Testo completoŠtegnerová, Kateřina, Luboš Náhlík e Pavel Hutař. "Influence of the V-Notch Opening Angle on Critical Applied Force Values for the Crack Initiation from the Sharp V-Notch". Key Engineering Materials 627 (settembre 2014): 165–68. http://dx.doi.org/10.4028/www.scientific.net/kem.627.165.
Testo completoHeidarvand, Majid, Naser Soltani e Farshid Hajializadeh. "Experimental and numerical determination of critical stress intensity factor of aluminum curved thin sheets under tensile stress". Journal of Mechanical Science and Technology 31, n. 5 (maggio 2017): 2185–95. http://dx.doi.org/10.1007/s12206-017-0414-8.
Testo completoZhang, Feng, Xin Wang, Rumin Teng, Xiaoguang Guo e Yuanyou Wang. "Study on Stress Intensity Factor of the Pit-Crack Model for Portal Crane Girders". Sustainability 15, n. 9 (6 maggio 2023): 7621. http://dx.doi.org/10.3390/su15097621.
Testo completoSevcik, Martin, Pavel Hutar, Lubos Nahlik, Ralf Lach, Zdenek Knesl e Wolfgang Grellmann. "Crack propagation in a welded polyolefin pipe". International Journal of Structural Integrity 3, n. 2 (25 maggio 2012): 148–57. http://dx.doi.org/10.1108/17579861211235174.
Testo completoAhmed Nassar, Ameen. "Evaluation of Critical Stress Intensity Factor (Kic) for Plates Using New Crack Extension Technique". Engineering and Technology Journal 31, n. 4A (1 aprile 2013): 730–40. http://dx.doi.org/10.30684/etj.31.4a.11.
Testo completoJi, Chenlong, Zhongliang Zheng, Ziming Qin e Hao Xue. "Investigation of Multi-Factor Stress Corrosion Cracking Failure of Safe-End Feedwater Lines of Submarine Power System". Materials 17, n. 6 (18 marzo 2024): 1381. http://dx.doi.org/10.3390/ma17061381.
Testo completoDing, Jun, Xia Huang, Wen Zhong Li e Xiang Guo Zeng. "Molecular Dynamics Simulation for Crack Propagation in Magnesium Alloy". Advanced Materials Research 472-475 (febbraio 2012): 2211–16. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.2211.
Testo completoHua, Wen, Jigang Xu, Shiming Dong, Jizhou Song e Qingyuan Wang. "Effect of Confining Pressure on Stress Intensity Factors for Cracked Brazilian Disk". International Journal of Applied Mechanics 07, n. 03 (giugno 2015): 1550051. http://dx.doi.org/10.1142/s1758825115500519.
Testo completoKim, Hyung Jin, Sung Wi Koh, Jae Dong Kim e Byung Tak Kim. "Effect of the Size of the Reinforcement Phased on the Properties of Silica-Filled Composites". Materials Science Forum 544-545 (maggio 2007): 267–70. http://dx.doi.org/10.4028/www.scientific.net/msf.544-545.267.
Testo completoIkeda, Toru, Isao Arase, Yuya Ueno, Noriyuki Miyazaki, Nobutaka Ito, Mami Nagatake e Mitsuru Sato. "Strength Evaluation of Plastic Packages During Solder Reflow Process Using Stress Intensity Factors of V-Notch". Journal of Electronic Packaging 125, n. 1 (1 marzo 2003): 31–38. http://dx.doi.org/10.1115/1.1525244.
Testo completoSADOVSKAYA, E., e S. LEONOVICH. "RELATIONSHIP OF THE STRESS-INTENSITY COEFFICIENT AT NORMAL SEPARATION AND THE STRENGTH IN TENSION". Herald of Polotsk State University. Series F. Civil engineering. Applied sciences 31, n. 8 (29 giugno 2022): 27–31. http://dx.doi.org/10.52928/2070-1683-2022-31-8-27-31.
Testo completoZhao, Rui-Huan, e J. C. M. Li. "Dynamic Emission of Dislocations From a Moving Crack". Journal of Engineering Materials and Technology 107, n. 4 (1 ottobre 1985): 277–81. http://dx.doi.org/10.1115/1.3225819.
Testo completoErdogan, F. "Slow Crack Growth in Glasses and Ceramics Under Residual and Applied Stresses". Journal of Electronic Packaging 111, n. 1 (1 marzo 1989): 61–67. http://dx.doi.org/10.1115/1.3226510.
Testo completoChoi, Dong Ho, Hang Yong Choi, Sang Hwan Chung e Hoon Yoo. "Mixed-Mode Fatigue Crack Growth in Orthotropic Steel Decks". Key Engineering Materials 321-323 (ottobre 2006): 733–38. http://dx.doi.org/10.4028/www.scientific.net/kem.321-323.733.
Testo completoAndrianopoulos, N. P., e V. C. Boulougouris. "On an intrinsic relationship between plane stress and plane strain critical stress intensity factors". International Journal of Fracture 67, n. 1 (maggio 1994): R9—R12. http://dx.doi.org/10.1007/bf00032369.
Testo completoLe, Minh-Quy. "Fracture of monolayer germanene: A molecular dynamics study". International Journal of Modern Physics B 32, n. 22 (20 agosto 2018): 1850241. http://dx.doi.org/10.1142/s0217979218502417.
Testo completo