Letteratura scientifica selezionata sul tema "Copper"

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Copper".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Copper"

1

Honkanen, Mari, Minnamari Vippola e Toivo Lepistö. "Oxidation of copper alloys studied by analytical transmission electron microscopy cross-sectional specimens". Journal of Materials Research 23, n. 5 (maggio 2008): 1350–57. http://dx.doi.org/10.1557/jmr.2008.0160.

Testo completo
Abstract (sommario):
In this work, the oxide structures of three polycrystalline copper grades, unalloyed oxygen-free (OF) copper and alloyed CuAg and deoxidized high-phosphor (DHP) copper, were studied using cross-sectional analytical transmission electron microscopy (AEM) samples. The oxidation treatments were carried out in air at 200 and 350 °C for different exposure times. The detailed oxide layer structures were characterized by AEM. At 200 °C, a nano-sized Cu2O layer formed on the all copper grades. At 350 °C, a nano-sized Cu2O layer formed first on the all copper grades. After longer exposure time at 350 °C, a crystalline CuO layer grew on the Cu2O layer of the unalloyed OF-copper. In the case of the alloyed CuAg- and DHP-copper, a crystalline and columnar shaped layer, consisting of Cu2O and CuO grains, formed on the nanocrystalline Cu2O layer. At 350 °C, the unalloyed copper oxidized notably slower than the alloyed coppers, and its oxide structures were different than those of the alloyed coppers.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Xu, Xiaowei, Jing Hua, Houhu Zhang, Zehua Zhao, Yi Wang, Dapeng Zhang, Jun Zhang e Xiaoxi Chen. "Environmental Risk Assessment of Recycled Products of Spent Coppery Etchant in Jiangsu Province, China". International Journal of Environmental Research and Public Health 18, n. 15 (26 luglio 2021): 7881. http://dx.doi.org/10.3390/ijerph18157881.

Testo completo
Abstract (sommario):
With the vigorous development of the 5G industry, the characteristic hazardous waste, spent coppery etchant, was also produced in large quantities. In recent years, there are many companies that have begun to collect spent coppery etchant for the purpose of producing recycled products, such as copper sulfate, copper oxide, basic copper chloride, and copper powder, which often contain large amounts of heavy metals. However, due to the lack of relevant standards and applicable regulatory measures, some of the recycled products flow to the feed processing industry and even to the food processing industry. This study investigated the pollution status of heavy metals in recycled products of spent coppery etchant and evaluated the impact of recycled products exposure on human health. The results showed that the content of Zn was the highest, which was 21 times higher than the corresponding standard limit. Human health risk assessment indicated that the hazard quotients of As account for 87.5% of the entire HI value, while the average carcinogenic risk values of As for copper sulfate, copper oxide, basic copper chloride, and copper powder are 1.09 × 10−5, 3.19 × 10−5, 1.29 × 10−5, 7.94 × 10−6, respectively. Meanwhile, suggestions on the supervision of recycled products and the concentration limits of heavy metals in recycled products were put forward.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Lalancette, N., e K. A. McFarland. "Phytotoxicity of Copper-Based Bactericides to Peach and Nectarine". Plant Disease 91, n. 9 (settembre 2007): 1122–30. http://dx.doi.org/10.1094/pdis-91-9-1122.

Testo completo
Abstract (sommario):
Organometallic copper, consisting of a mixture of copper abietate, copper linoleate, and copper oleate (CuALO), is important for postbloom management of bacterial spot in New Jersey peach and nectarine orchards. Rotation of CuALO with oxytetracycline reduces cost and helps prevent (or delay) resistant organisms. However, because copper is also phytotoxic, higher rates and inorganic coppers have not been utilized. A study was conducted on ‘Encore’ peach and ‘Redgold’ nectarine to determine the quantitative relationship between copper concentration (metallic equivalent) and phytotoxicity. Different rates of CuALO and copper hydroxide (CuOH) were applied seven times postbloom. Foliar injury and defoliation increased with number of applications and copper concentration. Maximum ‘Encore’ defoliation was 10 to 17%, while ‘Redgold’ sustained 30 to 35% leaf loss. CuOH caused similar or less leaf injury and defoliation than CuALO. No injury was observed on fruit, even at three times the labeled metallic copper rate of CuALO. Fruit size and soluble solids were not influenced by copper. Estimates of foliar density and tree volume indicated that sufficient photosynthetic capacity existed to allow acceptable leaf damage and loss from copper applications. These results showed that inorganic coppers may be viable alternatives to organometallic copper for postbloom bacterial spot control; nectarine may be more sensitive to copper injury than peach; and higher rates of metallic copper, above the current commercial rate, can be applied to peach. In the latter case, greater amounts of copper may provide longer residual activity and improved bacterial spot control on highly susceptible cultivars.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Carrillo, F., J. Martínez, R. Barrios e A. Roselló. "Kinetics of the conversion of copper sulfide to blister copper". Revista de Metalurgia 38, n. 5 (30 ottobre 2002): 334–38. http://dx.doi.org/10.3989/revmetalm.2002.v38.i5.416.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Cooper, H. Kory, Garett Hunt, Nicholas Waber e Carey Gray. "Precontact Native Copper Innovation in British Columbia". Canadian Journal of Archaeology 44, n. 2 (2020): 185–22. http://dx.doi.org/10.51270/44.2.185.

Testo completo
Abstract (sommario):
Copper has figured prominently in discussions of social complexity among Northwest Coast Cultures. Coppers, shield-like sheets of copper variable in size, were a form of lineage wealth displayed, gifted, or ritually destroyed at potlatches; and copper artifacts have been recovered from human burials. The former use of copper is well-documented ethnographically and historically while the latter phenomenon is less well understood. This paper provides an overview of the occurrence of copper in precontact archaeological contexts in British Columbia using published and unpublished literature. Our investigation is framed within a Behavioral Archaeology approach that elicits ideas on copper innovation and all that it entailed. We find that copper is rare in precontact contexts from a province-wide perspective; there was likely more than one instance of native copper innovation; and contrary to previous suggestions, the copper-rich Dene region of south-central Alaska and southwestern Yukon cannot account for most of the precontact examples of copper use in the province. We offer some hypotheses to explain the precontact distribution of copper in BC, including both local invention and diffusion, not in an attempt to deliver the final verdict on this topic, but rather, to stimulate additional research.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Zhang, Jing, Jie Wang, Yong Gao, Yaocheng Hu, Yupeng Xie, Zhiming You e Sheng Wang. "Influence of Film Coating Thickness on Secondary Electron Emission Characteristics of Non-Evaporable Getter Ti-Hf-V-Zr Coated Open-Cell Copper Foam Substrates". Materials 15, n. 6 (16 marzo 2022): 2185. http://dx.doi.org/10.3390/ma15062185.

Testo completo
Abstract (sommario):
The application of vacuum materials with low secondary electron yield (SEY) is one of the effective methods to mitigate the electron cloud (EC). In this study, the Ti-Hf-V-Zr non-evaporable getter (NEG) film was deposited on open-cell copper foams with different pore sizes for the suppression of electron multipacting effects. Besides, the influence of the film thickness on the secondary electron emission (SEE) characteristics of Ti-Hf-V-Zr NEG film-coated open-cell copper foam substrates was investigated for the first time. The results highlighted that all uncoated and NEG-coated foamed porous copper substrates achieved a low SEY (<1.2), which reduced at least 40% compared to the traditional copper plates, and the foamed porous coppers with 1.34-μm-thick NEG coating had the lowest SEY. Moreover, the surface chemistry and the morphological and structural properties of foamed porous coppers of different pore sizes with and without Ti-Hf-V-Zr NEG films were systematically analyzed.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Chang, Chao Cheng, e Teng Chiao Wang. "Effects of Grain Size on Micro Backward Extrusion of Copper". Advanced Materials Research 83-86 (dicembre 2009): 1092–98. http://dx.doi.org/10.4028/www.scientific.net/amr.83-86.1092.

Testo completo
Abstract (sommario):
This study investigates the effects of grain size on the micro backward extrusion of copper cups. An equal channel angular extrusion (ECAE) technique was applied to refine the grain size in copper. Commercial available copper was annealed, deformed by six-pass ECAE at room temperature and then heat treated to obtain a microstructure with a grain size of about 4μm. Microstructure was examined and mechanical properties including hardness and stress-strain relationship were also investigated. The processed copper was then used in a micro backward extrusion of cups with the diameter of 3 mm and the wall thickness of 0.1 mm. The extruded cups were compared with those resulting from the coppers with larger grain size prepared by different heat treated processes. This study shows that the quality of the micro extruded cup increases as the grain size decreases. By using the refine-grained coppers for the micro backward extrusion, the cups with even rim height and uniform wall thickness can be easily produced.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Ilca, Dacian, Tiberiu Manescu, Gilbert-Rainer Gillich, Zeno-Iosif Praisach e Cristian Tufisi. "Determination of proper parameters for ultrasonic welding of copper plate with copper wire strands". Vibroengineering Procedia 51 (20 ottobre 2023): 167–72. http://dx.doi.org/10.21595/vp.2023.23680.

Testo completo
Abstract (sommario):
Ultrasonic welding parameters originally provided by the components supplier caused negative pull/peel tension results. In this paper, we present a method to find the optimal parameters for the ultrasonic welding of copper elements. These elements represent components inside an electrical harness from automotive industry: coper plate and copper wire strands. The design of experiments (DoE) was used as a method within the Six Sigma approach. We succeeded in obtaining welding parameters that ensure successfully passing the pull/peel tension test.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Lee, Hyun-Ju, Chang-Wook Ji, Sung-Min Woo, Man-Ho Choi, Yoon-Hwae Hwang, Jae-Ho Lee e Yang-Do Kim. "Formation of Copper Seed Layers and Copper Via Filling with Various Additives". Korean Journal of Materials Research 22, n. 7 (27 luglio 2012): 335–41. http://dx.doi.org/10.3740/mrsk.2012.22.7.335.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Chen, Hao, Jin Hui Li e Mi Song Chen. "Effect of Rare Earth on Microstructure and Property of Refining Impure-Copper". Advanced Materials Research 189-193 (febbraio 2011): 3982–85. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.3982.

Testo completo
Abstract (sommario):
The self-prepared Cu-RE refining agents were used to refine impure-copper. The influences of RE elements on refinements and structures were studied and the mechanism of RE was discussed. The results show that by adding proper amounts of Cu-RE refining agents into impure-coppers, the refinements of RE on impure-coppers are perfect. Furthermore, the dendrites of the RE-refined ingot are refined and the structure becomes more homogeneous, leading that the electric conduction function and mechanics function of impure-copper have been improved.
Gli stili APA, Harvard, Vancouver, ISO e altri

Tesi sul tema "Copper"

1

Clark, Susan Ferguson. "Copper status in multiple trauma patients : measurement of copper balance, serum copper and ceruloplasmin /". This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-09162005-115033/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Graca, D. S. "Effects of copper depletion on subcellular hepatic copper and biliary copper excretion in cattle". Thesis, University of Aberdeen, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.370105.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Clark, Susan F. "Copper status in multiple trauma patients: measurement of copper balance, serum copper and ceruloplasmin". Diss., Virginia Tech, 1990. http://hdl.handle.net/10919/39376.

Testo completo
Abstract (sommario):
see document
Changes in copper metabolism have been reported in both thermal injury and skeletal trauma; data regarding copper status in multiple trauma patients (MTP) are nonexistent. Hypercatabolism following multiple trauma may increase copper utilization, deplete copper stores and compromise cuproenzyme synthesis and function. The purpose of this study was to provide information on copper status in MTP and determine whether age, injury severity, clinical outcome or nutritional intake influenced copper status. Twenty-four hour copper losses, serum copper and ceruloplasmin were measured in 11 MTP with Injury Severity Scores (ISS) >12 at 24-48 hours post admission. Collections of biological fluids (urine, nasogastric, chest tube, drains, stools) were analyzed for copper using atomic absorption spectrophotometry (AAS) and quantified over 5 days. Serial serum copper and ceruloplasmin were determined on days 1,3,5,10,15 and patient discharge by ASS and rate nephelometry inmunoprecipition, respectively. Eight patients received parenteral nutrition (PN). Three received intravenous glucose/electrolyte infusions (IV). urine (n=11) and nasogastric losses (n=8) were statistically greater than normal (p<.001). The mean ± SEM cumulative copper losses of urine, chest tube drainage, nasogastric secretions and other drains were 790 ± 116 (n=11), 833 ± 130 (n=7), 261 ± 46 (n+8), and 150 ± 58 μg/5 d (n=8), respectively. Urinary losses represented 10 to 12 times the normal copper excretion. Serum copper on day 1 and ceruloplasmin day 3 were significantly higher than normal (p<.025). Cumulative copper balance in the IV group was - 2266 μg and -440 μg in the PN group. No relationship was found between copper loss and ISS. Patients in their twenties demonstrated the greatest urinary copper loss. The physiological and biochemical effects of extensive copper loss in the MTP require further evaluation. These patients may have a predisposition to copper deficiency due to excessive copper losses and may require increased copper supplementation.
Ph. D.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Reed, Stewart T. "Copper adsorption/desorption characteristics on copper amended soils". Diss., This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-06062008-171512/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Mao, Zhong. "Effects of copper-ligand and copper-copper interactions on excited state properties of luminescent copper (I) complexes : structural and photophysical studies /". View the Table of Contents & Abstract, 2003. http://sunzi.lib.hku.hk/hkuto/record/B26450859.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Mao, Zhong, e 毛中. "Effects of copper-ligand and copper-copper interactions on excited state properties of luminescent copper (I) complexes: structural and photophysical studies". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B45015582.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Gremillion, Eric J. "Copper Kingdom". ScholarWorks@UNO, 2015. http://scholarworks.uno.edu/td/1973.

Testo completo
Abstract (sommario):
This paper thoroughly examines the production of the thesis film Copper Kingdom. From writing, directing, production design, editing, to cinematography, sound, and workflow, each aspect of the creation of Copper Kingdom is carefully detailed, with insights regarding the decisions made throughout the filmmaking process.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Törndahl, Tobias. "Atomic Layer Deposition of Copper, Copper(I) Oxide and Copper(I) Nitride on Oxide Substrates". Doctoral thesis, Uppsala University, Department of Materials Chemistry, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-4651.

Testo completo
Abstract (sommario):

Thin films play an important role in science and technology today. By combining different materials, properties for specific applications can be optimised. In this thesis growth of copper, copper(I) oxide and copper(I) nitride on two different substrates, amorphous SiO2 and single crystalline α-Al2O3 by the so called Atomic Layer Deposition (ALD) techniques has been studied. This technique allows precise control of the growth process at monolayer level on solid substrates. Other characteristic features of ALD are that it produces films with excellent step coverage and good uniformity even as extremely thin films on complicated shaped substrates.

Alternative deposition schemes were developed for the materials of interest. It was demonstrated that use of intermediate water pulses affected the deposition pathways considerably. By adding water, the films are thought to grow via formation of an oxide over-layer instead of through a direct reaction between the precursors as in the case without water.

For growth of copper(I) nitride from Cu(hfac)2 and ammonia no film growth occurred without adding water to the growth process. The Cu3N films could be transformed into conducting copper films by post annealing. In copper growth from CuCl and H2 the water affected film growth on the alumina substrates considerably more than on the fused silica substrates. The existence of surface -OH and/or -NHx groups was often found to play an important role, according to both theoretical calculations and experimental results.

Gli stili APA, Harvard, Vancouver, ISO e altri
9

Törndahl, Tobias. "Atomic layer deposition of copper, copper(I) oxide and copper(I) nitride on oxide substrates /". Uppsala : Acta Universitatis Upsaliensis : Univ.-bibl. [distributör], 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-4651.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Fitzsimons, Nuala Patricia. "Copper hydride as a precursor for supported copper catalysts". Thesis, University of Cambridge, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.281998.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Libri sul tema "Copper"

1

R, Davis J., e ASM International. Handbook Committee., a cura di. Copper and copper alloys. Materials Park, OH: ASM International, 2001.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Atkinson, R. L. Copper and copper mining. Princes Risborough: Shire, 1987.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Johanson, Paula. Copper. New York: The Rosen Pub. Group, 2007.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

C, Dameron, Howe Paul, National Research Centre for Environmental Toxicology (Australia), WHO Task Group on Environmental Health Criteria for Copper., United Nations Environment Programme, International Labour Organisation, World Health Organization, Inter-Organization Programme for the Sound Management of Chemicals. e International Program on Chemical Safety., a cura di. Copper. Geneva: World Health Organization, 1998.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

United States. Agency for Toxic Substances and Disease Registry. Division of Toxicology. Copper. Atlanta, GA: Dept. of Health and Human Services, Public Health Service, Agency for Toxic Substances and Disease Registry, Division of Toxicology, 2004.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Butler, L. J. Copper Empire. London: Palgrave Macmillan UK, 2007. http://dx.doi.org/10.1057/9780230589766.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Hohl, Joan. California copper. London: Silhouette Books, 1987.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Hohl, Joan. California copper. Don Mills, Ont: Mira Books, 1995.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Draper, Sharon M. Copper sun. New York, N.Y: Simon Pulse, 2008.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Copper & copper alloys. Potters Bar: Copper Development Association, 1991.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Capitoli di libri sul tema "Copper"

1

Sequeira, C. A. C. "Copper and Copper Alloys". In Uhlig's Corrosion Handbook, 757–85. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9780470872864.ch56.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Freudenberger, Jens, e Hans Warlimont. "Copper and Copper Alloys". In Springer Handbook of Materials Data, 297–305. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-69743-7_12.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Kundig, Konrad J. A., e John G. Cowie. "Copper and Copper Alloys". In Mechanical Engineers' Handbook, 117–220. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2006. http://dx.doi.org/10.1002/0471777447.ch4.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Castroviejo, Ricardo. "Copper(Cu/Native Copper)". In A Practical Guide to Ore Microscopy—Volume 1, 227–32. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-12654-3_37.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Bährle-Rapp, Marina. "copper". In Springer Lexikon Kosmetik und Körperpflege, 128. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71095-0_2406.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Kurtz, Wolfgang, e Hans Vanecek. "Copper". In W Tungsten, 200–234. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-662-08690-2_26.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Crowson, Philip. "Copper". In Mining in the Asia-Pacific, 217–36. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-61395-6_13.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Liu, Xingcheng, e Xiaolin Xiong. "Copper". In Encyclopedia of Earth Sciences Series, 1–3. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-39193-9_216-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Liu, Xingcheng, e Xiaolin Xiong. "Copper". In Encyclopedia of Earth Sciences Series, 303–5. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-39312-4_216.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Crowson, Phillip. "Copper". In Minerals Handbook 1992–93, 76–83. London: Palgrave Macmillan UK, 1992. http://dx.doi.org/10.1007/978-1-349-12564-7_12.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Copper"

1

Okamoto, S., K. Hashimoto, T. Sato e K. Niwa. "Laser welding copper and copper alloys". In ICALEO® ‘89: Proceedings of the Materials Processing Conference. Laser Institute of America, 1989. http://dx.doi.org/10.2351/1.5058338.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Ang, X. F., A. T. Lin, J. Wei, Z. Chen e C. C. Wong. "Low Temperature Copper-Copper Thermocompression Bonding". In 2008 10th Electronics Packaging Technology Conference (EPTC). IEEE, 2008. http://dx.doi.org/10.1109/eptc.2008.4763467.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ryding, David G., Douglas Allen e Richard H. Lee. "Brazing copper to dispersion-strengthened copper". In SPIE's 1996 International Symposium on Optical Science, Engineering, and Instrumentation, a cura di Ali M. Khounsary. SPIE, 1996. http://dx.doi.org/10.1117/12.259829.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Kishida, S., Y. Takada, Z. Yinan, J. M. Song e K. Yasuda. "Copper-Copper Ultrasonic Bonding by Using Blue Laser-Sintered Copper Nanoparticles". In 2022 International Conference on Electronics Packaging (ICEP). IEEE, 2022. http://dx.doi.org/10.23919/icep55381.2022.9795481.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Kim, Wooyoung, Seung Ho Han, Yongin Lee, Donggap Shin, Wonyoung Choi, Jiwon Moon, Kyeongbin Lim, BumKi Moon e Minwoo Daniel Rhee. "Copper contamination control in Hybrid Copper Bonding". In 2023 International Conference on Electronics Packaging (ICEP). IEEE, 2023. http://dx.doi.org/10.23919/icep58572.2023.10129740.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Zeng, Xian, Yu Zhang, Chengqiang Cui, Kai Zhang, Xun Chen, Xin Chen, Jian Gao, Yunbo He e Hui Tang. "Synthesis of copper nanoparticles using copper hydroxide". In 2018 19th International Conference on Electronic Packaging Technology (ICEPT). IEEE, 2018. http://dx.doi.org/10.1109/icept.2018.8480621.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Hu, Liangxing, Simon Chun Kiat Goh, Shaoteng Wu e Chuan Seng Tan. "Sputtered Copper Nitride-Copper Nitride Direct Bonding". In 2021 7th International Workshop on Low Temperature Bonding for 3D Integration (LTB-3D). IEEE, 2021. http://dx.doi.org/10.1109/ltb-3d53950.2021.9598450.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Dell'Erba, M., P. Sforza, G. Chita e L. Cento. "New Problems Emerging From CO 2 Laser Material Processing: Copper To Copper And Copper To Non-Copper Welding". In 1986 Int'l European Conf on Optics, Optical Systems, and Applications, a cura di Stefano Sottini e Silvana Trigari. SPIE, 1987. http://dx.doi.org/10.1117/12.937099.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Sakamoto, Hirokatsu, Tadashi Teranishi, Rumi Nagai, Ryo Itaya e Akihiko Happoya. "Polymer Hybrid Bonding using Copper-Copper Bonding Materials and Thermosetting Resins for Copper-Copper Bonding at 200–250 °C". In 2024 International Conference on Electronics Packaging (ICEP). IEEE, 2024. http://dx.doi.org/10.23919/icep61562.2024.10535679.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Gondcharton, P., B. Imbert, L. Benaissa e M. Verdier. "Copper-copper direct bonding: Impact of grain size". In 2015 IEEE International Interconnect Technology Conference and 2015 IEEE Materials for Advanced Metallization Conference (IITC/MAM). IEEE, 2015. http://dx.doi.org/10.1109/iitc-mam.2015.7325657.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Copper"

1

Kirkham, R. V., e W. D. Sinclair. Vein copper. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1995. http://dx.doi.org/10.4095/208010.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Dawson, K. M., e R. V. Kirkham. Skarn copper. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1995. http://dx.doi.org/10.4095/208018.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Simon, N. J., E. S. Drexler e R. P. Reed. Properties of copper and copper alloys at cryogenic temperatures. Gaithersburg, MD: National Institute of Standards and Technology, 1992. http://dx.doi.org/10.6028/nist.mono.177.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Kirkham, R. V. Volcanic redbed copper. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1995. http://dx.doi.org/10.4095/207986.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Eckstrand, O. R. Nickel-copper sulphide. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1995. http://dx.doi.org/10.4095/208042.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Blais, A. Copper Rand Mine. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1991. http://dx.doi.org/10.4095/132280.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Palmer, D. A., J. M. Simonson e D. B. Joyce. Volatility of copper. Office of Scientific and Technical Information (OSTI), agosto 1996. http://dx.doi.org/10.2172/285269.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Zhao, L., P. E. Phelan, R. C. Niemann e B. R. Weber. Thermal resistance across a copper/Kapton/copper interface at cryogenic temperatures. Office of Scientific and Technical Information (OSTI), settembre 1997. http://dx.doi.org/10.2172/554889.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Delaney, G. D. Investigations of sediment-hosted copper and copper-uranium mineralization, Wollaston Domain. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1995. http://dx.doi.org/10.4095/205407.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Kidwell, David A. Measuring Copper in Seawater - An Automated Detection of Copper Binding Capacity. Fort Belvoir, VA: Defense Technical Information Center, dicembre 2003. http://dx.doi.org/10.21236/ada419453.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia