Tesi sul tema "Consideration"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Consideration".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.
Twyford, John. "The doctrine of consideration the role of consideration in contract modifications /". Sydney : University of Technology, Sydney. Faculty of Law, 2002. http://hdl.handle.net/2100/286.
Testo completoWilson, Lawrence. "Individualized Consideration: Poverty Countermeasure". ScholarWorks, 2014. https://scholarworks.waldenu.edu/dissertations/81.
Testo completoZvolanek, Larry G. "Formalistic consideration of artistic elements". Thesis, Kansas State University, 1985. http://hdl.handle.net/2097/9894.
Testo completoHuxley, Michael. "Modern dance : a historical consideration". Thesis, De Montfort University, 2016. http://hdl.handle.net/2086/14170.
Testo completoBarbour, Yael. "Fresh blood, a consideration of belonging". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/tape16/PQDD_0011/MQ29141.pdf.
Testo completoKrebs, Thomas. "Failure of consideration : a comparative study". Thesis, University of Oxford, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.264584.
Testo completoOcholi, Eleojo E. "Web engine for investigating consumer consideration". Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/53176.
Testo completoIncludes bibliographical references (p. 37-38).
Today consumers are presented with a plethora of products each time they want to make a purchase. Sometimes they have up to thousands of options and configurations to pick from and yet many consumers are shown to initially screen this size to create a more manageable set to truly consider in an in-depth way. Companies today are looking for ways to ensure that their products make it into the smaller consideration sets of consumers in order to increase the probability of sales. This thesis documents the design of a web engine that provides a survey framework for investigating algorithms that aim to predict which products a user will place in their consideration set as well as to aid in investigating the factors that can lead to the modification of rules that govern a consumer's consideration set. Firstly I evaluated and documented the improvements required from older systems created by the research group. Then over the course of two studies I designed a highly modular system that is a new iteration of the older versions. Finally, more than 3500 participants used the system during field tests and the system was successful in mitigating the previous issues and delivering a better user experience as well as collecting the necessary data. This project lays the groundwork for a platform that can be used for generally investigation and testing consideration predictive algorithms in various retail spaces.
by Eleojo E. Ocholi.
M.Eng.
Shahi, Mohammad Hassan Panjeh. "Pressure drop consideration in process integration". Thesis, University of Manchester, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.333599.
Testo completoNEWELL, HEIDI C. "A CONSIDERATION OF FEMININE DEFAULT GENDER". University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1123162261.
Testo completoBoardman, Charlotte Mary. "Considering consideration : a critical and comparative analysis of the doctrine of consideration in the Anglo-Canadian common law". Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45660.
Testo completoHeine, Wolf-Dietrich. "An ecological consideration of stimulus response compatibility /". Münster ; New York : Waxmann, 1994. http://bvbr.bib-bvb.de:8991/F?func=service&doc_library=BVB01&doc_number=006716535&line_number=0001&func_code=DB_RECORDS&service_type=MEDIA.
Testo completoÖhman, Karin. "Forest planning with consideration to spatial relationships /". Umeå : Swedish Univ. of Agricultural Sciences (Sveriges lantbruksuniv.), 2001. http://epsilon.slu.se/avh/2001/91-576-6082-4.fulltext.pdf.
Testo completoTan, Yusong. "Capacity consideration of wireless ad hoc networks". Diss., Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2008. http://wwwlib.umi.com/cr/ucsd/fullcit?p3307123.
Testo completoTitle from first page of PDF file (viewed July 2, 2008). Available via ProQuest Digital Dissertations. Vita. Includes bibliographical references (p. 70-74).
Hamisu, Aminu Alhaji. "Petroleum refinery scheduling with consideration for uncertainty". Thesis, Cranfield University, 2015. http://dspace.lib.cranfield.ac.uk/handle/1826/9411.
Testo completoBoyd, Frank W. "Consideration of gravity gradient stabilization for ORION". Thesis, Monterey, California. Naval Postgraduate School, 1989. http://hdl.handle.net/10945/26946.
Testo completoHoltzhausen, N. "Whistleblowing for good governance: Issues for consideration". Journal of Public Administration, 2007. http://encore.tut.ac.za/iii/cpro/DigitalItemViewPage.external?sp=1001414.
Testo completoBashir, N. (Nouman). "Implementation consideration of M2M4 SINR estimation algorithm". Master's thesis, University of Oulu, 2016. http://urn.fi/URN:NBN:fi:oulu-201612163291.
Testo completoGolan, Jennifer. "Consideration of Diet in Inpatient Glycemic Control". University of Cincinnati / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1321969188.
Testo completoYuan, Ding. "Heuristic subset clustering for consideration set analysis". Diss., University of Iowa, 2007. http://ir.uiowa.edu/etd/137.
Testo completoObi, Manasseh Okocha. "Materials consideration for nanoionic nonvolatile memory solutions". [Boise, Idaho] : Boise State University, 2009. http://scholarworks.boisestate.edu/td/50/.
Testo completoJan, Rabea. "Recreating writing: A consideration of translated literature". CSUSB ScholarWorks, 1985. https://scholarworks.lib.csusb.edu/etd-project/314.
Testo completoQuaglieri, Marco <1982>. "Causa, consideration e Diritto europeo dei contratti". Doctoral thesis, Università Ca' Foscari Venezia, 2012. http://hdl.handle.net/10579/1150.
Testo completoThe objective of this thesis is to confirm the relevance of the real purpose of the agreement in the European contract law. In particular, I examine the Italian contract law and the English contract law. In addition, I examine also the Principles of European Contract Law, the Avant-project written by the Lando Commission and the UNIDROIT Principles. I analyze the causa del contratto in the Italian law and the consideration of contract in the common law of England. This analysis is made taking into account also the rules governing the interpretation of the contract, the illegality of contract and the presupposizone in the Italian contract law. In the same way, I consider in the interpretation of contract, the unlawful act theory and the frustration of contract in the English contract law. The investigation continues by assessing the similar problems in the Lex Mercatoria. This analysis allows to verify that, even if not explicitly mentioned in the statute law nor in the case law, the real purpose of the agreement is an essential element of European contract law.
Šebeková, Veronika. "Srovnání institutů consideration a kauzy v smluvním právu". Master's thesis, Vysoká škola ekonomická v Praze, 2008. http://www.nusl.cz/ntk/nusl-10347.
Testo completoGrandani, Attilio. "Everything taken into consideration : a study of the use of offences taken into consideration process within the Metropolitan Police Service". Thesis, Cardiff University, 2018. http://orca.cf.ac.uk/119429/.
Testo completoMeng, Xiaozhou. "Maintenance Consideration for Long Life Cycle Embedded System". Licentiate thesis, Mittuniversitetet, Institutionen för informationsteknologi och medier, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-16440.
Testo completoBlomfield, Suzanna Jane. "Consideration for the unspecified other : an exploratory study /". Title page, table of contents and abstract only, 2004. http://web4.library.adelaide.edu.au/theses/09ARPS/09arpsb653.pdf.
Testo completoFarrant, Anthony James. "An ethical consideration of increasing human life spans". Thesis, University of Hull, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.422037.
Testo completoChan, Chi-fai, e 陳志輝. "Epigenetic modification site prediction : technical consideration and application". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2015. http://hdl.handle.net/10722/210159.
Testo completoChu, N. "Wave force calculation with consideration of viscous effects". Thesis, University of Strathclyde, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.382261.
Testo completoKurokawa, Ai. "Consideration of culture in educating young diverse populations". Thesis, Boston University, 1997. https://hdl.handle.net/2144/27697.
Testo completoPLEASE NOTE: Boston University Libraries did not receive an Authorization To Manage form for this thesis. It is therefore not openly accessible, though it may be available by request. If you are the author or principal advisor of this work and would like to request open access for it, please contact us at open-help@bu.edu. Thank you.
2031-01-02
"The Doctrine of Consideration (the role of consideration in contract modifications)". University of Technology, Sydney. Faculty of Law, 2002. http://hdl.handle.net/2100/286.
Testo completoYuan, Jun. "Life cycle consideration for steel bridges with consideration of usage, durability and maintenance". Thesis, 2006. http://hdl.handle.net/2429/17718.
Testo completoApplied Science, Faculty of
Civil Engineering, Department of
Graduate
Wu, Yun-Ru, e 吳韻如. "Maze Routing with OPC Consideration". Thesis, 2005. http://ndltd.ncl.edu.tw/handle/97268881509150891149.
Testo completo國立清華大學
資訊工程學系
93
As the technology of manufacturing process continues to advance, the process variation becomes more and more serious in nanometer designs. Optical proximity correction (OPC) is employed to correct the process variation of the diffraction effect. To obtain the desired layout as early as possible, routers must have some changes to handle the optical effects to speed up the OPC time and to avoid the routing result that cannot be corrected by the OPC process. In this thesis, we propose two practical OPC-aware maze routing problems and present how to enhance an existing maze routing algorithm to get an optimal algorithm for each problem. The experimental results are also given to demonstrate the effectiveness of these two enhanced algorithms.
ZENG, GUO-TAI, e 曾國泰. "Structural design under multioptimal consideration". Thesis, 1993. http://ndltd.ncl.edu.tw/handle/38773806302374762763.
Testo completoLiu, Yi-Chen, e 劉奕辰. "Portfolio Selections under Hedging Consideration". Thesis, 2002. http://ndltd.ncl.edu.tw/handle/31564409711025273630.
Testo completo中原大學
工業工程研究所
90
Portfolio selection and risk management had been the most important research fields in modern finance recently. Since the values (price) and risk (deviation) of assets of investors in the future are all uncertainty, investors will face more complex investment problems than usual. In this thesis, the modified Amount-MAD model was applied to select riskless portfolio and make correct investment decisions. Although the modified Amount-MAD model performs well, the portfolio that selected by it is still risky. To avoid the fluctuated risk, we formulate our Hedging Strategies that based on LPM0 and MAD concepts to solve the problem. At the end of this study, we evaluated our Hedging Strategies by using real historical data and compare that with conventional minimum-variance method. It demonstrates that our Hedging Strategies can provide a sophisticate investment tool for the investor or fund manager in the world.
Zhang, NING. "Cultural Differences in Opportunity Cost Consideration". Thesis, 2013. http://hdl.handle.net/1974/8137.
Testo completoThesis (Master, Psychology) -- Queen's University, 2013-08-01 15:22:09.816
Lee, Wei-Chen, e 李偉誠. "Convenience store franchising consideration factor analysis". Thesis, 2000. http://ndltd.ncl.edu.tw/handle/01037730874140773440.
Testo completo國立臺北大學
企業管理學系
88
The convenience store business have entered the era of fierce competition, therefore how to attract new franchisees and at the same time retain good relationship with franchisees that are already in operation have been the main task for the franchisers. Furthermore, how to set franchise rules and improve franchising procedure in order to attract more franchisees to enter the franchise have been the main goal for many convenience store franchise system’s main task.. Currently, many franchise systems use different franchise rules and management methods. Therefore, the goal of this thesis is to understand the operation of Taiwanese franchise operation, management methods and future goals. Hopefully, this thesis can bring some contribution to future franchise-related studies, also at the same time, figure out the potential franchising potential consideration factors in order to attract more investors to join franchise. This thesis focuses on the factors that franchisees consider when choosing franchise system to join. Hopefully through interviews made to current franchisees (convenience store managers), this thesis can clarify the franchise consideration factors and assist franchisers to attract more investors to join. Through the interviews and surveys, the three franchise systems have the following common characteristics: 1. As long as the franchise is well-known, the competitiveness of the products will not affect customers’ choices of place to spend but it will affect the amount that customers spend. 2. The past operation focuses is consider important factor because before the franchisees join the franchise system, they were customers too and they have established assumptions toward the system, therefore, it has certain degree of affection. 3. The success rate has surpass other competitors have considered important factors because open a franchise convenience store require over one million new Taiwanese dollars of investment, therefore, choosing a well-known franchise system is considered important to franchisers. 4. Because the three franchise systems that is included in the research have the history of at least 10 years, therefore, it possess strong position in the franchise system. Therefore, good communication channels have been consider the most crucial consideration factors when choosing a franchise system to join. In conclusion, this thesis provide franchisers the following recommendations to improve the relationship with franchisees: the establishment of franchiser-franchisee management department, to provide the franchise rules with flexibility and to simplify the franchise contracts to attract more people to join.
Liu, Jia-Dong, e 劉佳東. "Rent-Seeking : take votes into consideration". Thesis, 2000. http://ndltd.ncl.edu.tw/handle/30132892601543772659.
Testo completoWENG, HENG-YU, e 翁鴻裕. "International facility location a strategic consideration". Thesis, 1993. http://ndltd.ncl.edu.tw/handle/80201238704970284394.
Testo completoSu, Yu-Siang, e 蘇裕翔. "An MCM Layout with EMC Consideration". Thesis, 1997. http://ndltd.ncl.edu.tw/handle/00657915746273984271.
Testo completo國立臺灣大學
電機工程學系
85
In recent years, interconnection analysis and packaging technology have become the bottleneck to take full advantage of the advances in semiconductor fabrication technology. The Multi- Chip Module (MCM ) technology has been introduced to improve system performance. However, MCM technology also introduces additional design constraints in terms of electrical and thermal characteristics which must be considered during physical design. In this thesis, we implement a graphical interactive MCM layout editor based on Microsoft Foundation Class (MFC), which provides interactive editing functions for MCM layout design. A general area auto-router with Electromagnetic Interference (EMI) improvement, and equal delay line as well as shielding wire considerations for MCM design is also included.
Lee, Shing-Hung, e 李信宏. "Network Fault Identification with Temporal Consideration". Thesis, 2001. http://ndltd.ncl.edu.tw/handle/02684491278967004576.
Testo completo逢甲大學
資訊工程學系
89
In the last few decades, the explosive growth of the Internet has been accompanied by a wide range of internetworking problems related to routing, resource reservation, and administrators. Networks often consist of hundreds or even thousands of interconnected nodes form different manufacturers factories. As a result, we will have more and more complex problems in the network. We know that network faults are not avoidable. Therefore, it is important to find out what and where are problems in the network as soon as possible. The fault management plays an important role in managing a network effectively. The development of a practical and effective system for network fault diagnosis becomes an urgent task. In this paper, we offer a fault diagnosis mechanism, a two-phase network alarm correlation method, for effective and automated network fault isolation. This mechanism uses a Finite State Machine (FSM) to model classified and refined fault propagation behaviors by adding temporal factor. The FSM graphs of fault propagation behaviors are constructed by several alarm states in every time interval. This two-phase inference diagnosis method includes two phases doing inference work. In the phase I, in the each fixed cycle, domain manager will monitor and listen to alarms in the network. If the domain manager received alarms, it will guess which kind of alarm states were happened with FSM graph model of faults. After this step, in the phase II, the domain manager will know what kind of fault was happened in its domain according alarm states of propagation durations. Finally, domain managers will work in a propagation durations to find the most possible fault in a global view. In our lab environment, we can successfully recognize ten network faults of TCP/IP. Our key contribution is not only the automated process of alarm collection, alarm correlation, and fault isolation, but also identify the propagation of each fault with a corresponding severity.
Hsieh, Chang-Chieh, e 謝長杰. "Option Pricing with Higher Moments Consideration". Thesis, 2014. http://ndltd.ncl.edu.tw/handle/26252998588297053620.
Testo completo東吳大學
經濟學系
103
This dissertation consists of three essays, one of which examines if it is possible to find the characteristic that can be adapted to abnormal fluctuations and unpredictable cluster effects in the real world by refining the traditional covered-call strategy with stochastic volatility in order to improve this strategy under the Black and Scholes model (1973). Since the distribution of the return of the target asset in the real world is highly likely to be left-skewed and leptokurtic, it will influence the accuracy of the option pricing; otherwise, the basic hypothesis of the return of the target asset is normally distributed, such as in the simple BS model, the GARCH pricing model, and many other stochastic volatility models. Therefore, this study adopts three approximations to price - Gram-Charlier approximate solution, Edgeworth approximate solution, and Shaddlepoint approximate solution - in order to take skewness and kurtosis into account. The first two approximate solutions are derived from the Approximation of Taylor Series Expansion. The laster solution is derived from the asymptotics method from the concept in statistics. Under the consideration of skewness and kurtosis in the pricing model of European options, this paper introduces three analytic solutions and their detailed derivations. First, this paper compares these three approximations with numerical simulations to show the possible bad effects mentioned by other scholars in the past literature. The bad effect entails out of the possible range between zero to one in the probability density function. Second, this paper compares the accuracy among these three approximations by the benchmark Merton jump model (1976). Third, because American option pricing does not possess a closed-form and is not easy to price, many scholars have evaluated the price of American options in many different ways. This paper presents most of the different American option pricing methods that have been introduced in the literature and looks to further improve the American option pricing model introduced by Kallast and Kivinukk (2003). This paper integrates the three approximations into Kim’s integral equations and evaluates their accuracy with Monte Carlo simulation.
Deets, Gregory B. "Copepod-chondrichthyan coevolution : a cladistic consideration". Thesis, 1995. http://hdl.handle.net/2429/8770.
Testo completoWu, Hung-Lin, e 吳弘琳. "Consideration of the adnominal form “TENO”". Thesis, 2010. http://ndltd.ncl.edu.tw/handle/24033046904375960387.
Testo completo臺灣大學
日本語文學研究所
98
In general, the most typical adnominal form of Japanese verbs is “ru” type, “ta” type, “teiru” type, and “teita” type. Also “TENO” form is one of the expressions commonly used to modify nouns in Japanese. However, it has never been taught in the curriculum of school education and there are only few researches studying it. Therefore, the purposes of this paper are to clarify the adnominal form “TENO” and its actual use through the actual examples and using quantity statistics based on related studies compiled so far. The results are as following: 1. “TENO” adnominal form must contain the meaning-usage called
Pan, Yueh-Yi, e 潘岳頤. "Making decisions and consideration in stock". Thesis, 2008. http://ndltd.ncl.edu.tw/handle/56089605220244766688.
Testo completo開南大學
企業與創業管理學系
97
Making decisions and consideration in stock investing Abstract Making a good selection to stock investments is considered to be an important task for investors. However, within the stock selection process, most evaluations are qualitative. There are few papers using quantification. This paper, has, therefore, applied decision making trial and evaluation laboratory (DEMATEL),analytic network process (ANP) and VlseKriterijumska Optimizacija IKompromisnoResenje (VIKOR) to evaluate stock selection criterion, which add a new perspective to the analysis of stock selection. Besides, there are a few papers using ANP and VIKOR in the field of finance, so this study attempts to fill this need. In this paper, a multicriteria decision-making method (MCDM) is used to rank alternative stocks in Taiwan, since most of the studies in stock selection decisions have been conducted in the western countries. In our study, ANP with three aspects and nine criteria is used to develop an evaluation hierarchy for stocks. Seven primary stocks in Taiwan are evaluated, including Mediatek, Motech Industries Inc, HTC, Cathy Financial Holdings, Huaku Constructio, China Steel, Taiwan Cement. The aspects include fundamental analysis, technical analysis, and institutional analysis. The criteria are risk, growth, profitability, operation, Relative Strength Index (RSI), Moving average (MA), Moving Averages Convergence Divergence (MACD), institutional investors, and trading volume. The alternatives are ranked by the VIKOR. Results indicated that institutional indicators are the most used criteria in Taiwan, and most of the financial experts in Taiwan have estimated institutional investors with the highest importance. In addition, the results also indicate that Mediatek ranks first of seven primary stocks in Taiwan. Explanations of our results and implications are discussed.
Liao, Hsien-Chun, e 廖先駿. "Consensus Related Problems with Weight Consideration". Thesis, 2012. http://ndltd.ncl.edu.tw/handle/26960501105551381902.
Testo completo淡江大學
資訊工程學系碩士班
100
A fault-tolerant distributed system maintains normal operation as long as faulty components in the system are within a tolerable amount. To ensure that the system is robust, we need a mechanism to allow a set of processors to reach a common agreement, even in the presence of failures and malicious attacks. This problem can be solved as a consensus problem. However, conventional consensus problems have numerous limitations and lack flexibility and thus do not fit many modern applications. In this study, we attempt to extend the consensus problem by defining two new patterns of the consensus problem as follows: (1) k-set consensus problem with weight consideration of basis and multiple initial values: Each processor is allowed to have multiple initial values, and weight (basis) is considered in the k-set consensus problem; (2) early stopping interactive consistency problem with weight consideration: The early stopping concept and weight consideration will be introduced in the interactive consistency problem to solve the consistent task schedule problem under the cloud computing environment. If enough messages have been collected, the system can terminate message exchanging and achieve an interactive consistency earlier.
Xie, Zhuoyan. "Towards a Normative Basis of the Doctrine of Consideration". Thesis, 2010. http://hdl.handle.net/1807/25523.
Testo completoTsai, Ming-Hsien, e 蔡明憲. "Smart Product Design with Consideration of Scenarios". Thesis, 2017. http://ndltd.ncl.edu.tw/handle/88103893699508719467.
Testo completo中原大學
工業與系統工程研究所
105
Lately, the development of intelligent products has become prominent, because it improves the convenience of people’s lives. The technological advancements that comes with the intelligent products provide a wide range of intelligent features to meet the different consumer demands. This study summarizes the four key features of intelligent products, combines them with TRIZ tools, to build a set of “Intelligent Product Development Process”. To achieve this, firstly this study defines a scenario on how to use the intelligent product, secondly finds the problems and customer requirements of the product. Then collects data from the problems and requirements and the data is used as a blueprint to design intelligent product. Lastly, this study uses TRIZ to solve the problem from the new design. To illustrate this methodology, this study takes the products as examples. This study hopes that the proposed approach can be used as a reference for the development of intelligent products in the industry.
Jaw, Shuh-Sheng, e 趙樹聖. "Design Consideration of High-Speed CMOS Devices". Thesis, 1988. http://ndltd.ncl.edu.tw/handle/13099060339676870951.
Testo completo國立交通大學
電子研究所
76
In this thesis, the variation of the carrier distribution in the inversion layer by quantum mechanics for B+ and BF2+ channel implantation is researched in detail. The carrier mobility which considers the above-mentioned variation and normal field mobility degradation is more complete and accurate than the conventional one in MINIMOS. The simulation results of the mobility model show that there is about 10% error in the measurements. The modified mobility model which fitted by the experiments can reduce the error to below 3%. From the comparison of the mobility between B+ and BF2+ channel implantation, an optimal channel implantation to get the higher mobility is obtained. The basic scaling laws contain constant field, constant voltage and quasi-constant voltage, which have a lower mobility degradation and lower saturation current. From the point of view of speed, a new scaling law which has a lighter scaled voltage and a greater scaled gate oxide thickness than the basic scaling laws is proposed. The comparisons between the basic scaling laws and the new one in saturation current, mobility, and circuit speed of TISA (Timing Synthesis and analysis) are used to find an optimal scaling law. The results of simulation reveal that new scaling law which with a larger mobility degradation and higher saturation current gets the better circuit speed, and a maximum increase ratio in circuit speed. Therefore, the new scaling is obtained which can be used in designing of high-speed CMOS.
Yang, Ren He, e 楊仁和. "Structural Analysis with Consideration of Material Variation". Thesis, 1995. http://ndltd.ncl.edu.tw/handle/75140451034822141642.
Testo completo