Bibliografie tematiche / Coning

Letteratura scientifica selezionata sul tema "Coning"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 19 febbraio 2022

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Coning".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Coning"

Richardson, J. G., J. B. Sangree e R. M. Sneider. "Coning". Journal of Petroleum Technology 39, n. 08 (1 agosto 1987): 883–84. http://dx.doi.org/10.2118/15787-pa.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Farmen, Jonn-Erik, Geri Wagner, Unni Oxaal, Paul Meakin, Jens Feder e Torstein Jøssang. "Dynamics of water coning". Physical Review E 60, n. 4 (1 ottobre 1999): 4244–51. http://dx.doi.org/10.1103/physreve.60.4244.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Tang, Chuanye, e Xiyuan Chen. "Constrained Coning Correction Algorithms". Journal of Aerospace Engineering 31, n. 4 (luglio 2018): 04018029. http://dx.doi.org/10.1061/(asce)as.1943-5525.0000844.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Jiang, Y. F., e Y. P. Lin. "Improved strapdown coning algorithms". IEEE Transactions on Aerospace and Electronic Systems 28, n. 2 (aprile 1992): 484–90. http://dx.doi.org/10.1109/7.144574.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Wang, Rong, Kui Zhang, Yong Gang Duan e Ting Kuan Cao. "Evaluating Water Coning Control for Horizontal Well in Bottom-Water Sandstone Reservoirs by Numerical Method". Advanced Materials Research 524-527 (maggio 2012): 292–96. http://dx.doi.org/10.4028/www.scientific.net/amr.524-527.292.

Testo completo

Abstract (sommario):

Horizontal well is the main technology to develop bottom-water sandstone reservoirs. Water coning has a significant influence on development effect, and shut-in coning control is one of coning suppression methods. Based on the geological model of a given oilfield, this paper has made an evaluation of water coning control by numerical simulation. It can be concluded that the method of shut-in coning control is effective for low water cut wells. When shutting in, the lower the water cut is, the greater decline extent of water cut can be obtained and the higher cumulative oil production can be achieved after well reopening. The longer the close time is, the better water coning control effect can be acquired, however it will affect oil production undoubtly. When horizontal well enters into high water cut stage, shut-in coning control not only has almost no effect, but also has a negative impact on the normal oil production.

Gli stili APA, Harvard, Vancouver, ISO e altri

Schulze, Bernd, e Walter Whiteley. "Coning, Symmetry and Spherical Frameworks". Discrete & Computational Geometry 48, n. 3 (4 maggio 2012): 622–57. http://dx.doi.org/10.1007/s00454-012-9427-3.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gunning, James, Lincoln Paterson e Boris Poliak. "Coning in dual completed systems". Journal of Petroleum Science and Engineering 23, n. 1 (maggio 1999): 27–39. http://dx.doi.org/10.1016/s0920-4105(99)00006-6.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Obaro, S. K. "Avoiding coning in childhood meningitis." BMJ 306, n. 6893 (19 giugno 1993): 1691–92. http://dx.doi.org/10.1136/bmj.306.6893.1691-c.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Pulec, Jack L. "Cerumen and Coning Candle Chicanery". Ear, Nose & Throat Journal 75, n. 9 (settembre 1996): 574. http://dx.doi.org/10.1177/014556139607500901.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Platus, D. H. "Missile and spacecraft coning instabilities". Journal of Guidance, Control, and Dynamics 17, n. 5 (settembre 1994): 1011–18. http://dx.doi.org/10.2514/3.21303.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Coning"

Astutik, Wynda. "IPR Modeling for Coning Wells". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for petroleumsteknologi og anvendt geofysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19518.

Testo completo

Abstract (sommario):

In this study, based on the work of Vogel, we generated the Inflow Performance Relationship (IPR) curves and its dimensionless form at any stage of depletion using black-oil simulator results. The IPR was generated for horizontal well with gas and water coning problems, producing from thin oil reservoir sandwiched between gas cap and aquifer. Two empirical IPR equations adopted from SPE paper by Whitson was also presented here. The first empirical relationship was developed based on simulated data for each reservoir pressure (stage of depletion) while the second relationship was developed based on all generated data.A fully implicit black-oil Cartesian model with total grid number of 1480 and 150 ft total thickness was used as reservoir model. The horizontal well extends through the full length of reservoir in y-direction with only one grid number along the horizontal section which makes the model a 2D problem. Sensor reservoir simulator and Pipe-It software were utilized to generate the IPR data.This work also includes a sensitivity study to understand the effect of several parameters to gas and water coning behavior, well placement optimization, coning collapse study, and the effect of coning to maximum well production rate. In coning collapse study, a relationship between flowing bottom-hole pressure and reservoir pressure when the cone collapse is provided in graphical form. This could be useful in field application where chocking the well to lower flowing bottom-hole pressure has become one alternative to reduce coning problems.

Gli stili APA, Harvard, Vancouver, ISO e altri

Ronen, Jonathan. "Boundary Control of the Gas Coning Problem". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for teknisk kybernetikk, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-11460.

Testo completo

Abstract (sommario):

This thesis was set to tackle the gas coning problem in oil-rim reservoirs with horizontal wells. The focus was short term production planning in the sub-critical phase only. Different controllers were developed and assessed based on the objective of net-present-value (NPV) of oil produced in the sub-critical phase.The reservoir model is a 1-D partial differential equation describing the dynamics of the gas-oil contact (GOC), for a homogeneous reservoir. Gas coning is considered to be the deformation of the GOC towards the well.Several controllers were developed and assessed alongside control laws from previous research: (i) the Backstepping method was used to develop a state-feedback controller, along with an observer. Coupled they make the Backstepping output-feedback controller. (ii) an output-feedback controller based on the structure proposed by previous research. (iii) linear-quadratic optimal control.An extended Kalman filter was also considered as a state observer, alongside the Backstepping observer.The backstepping controller did not deliver an increase of sub-critical payout which warrants the complicated structure of an observer-controller pair. It was even outperformed by simpler, output-feedback control laws. The optimal linear-quadratic controller achieved the best NPV of sub-critical production by far. This makes it the most attractive control strategy presented, even when considering that a real-world implementation will need to be paired with a state observer.

Gli stili APA, Harvard, Vancouver, ISO e altri

Okon, Anietie Ndarake. "WATER CONING IN FRACTURED RESERVOIRS: A SIMULATION STUDY". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for petroleumsteknologi og anvendt geofysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19598.

Testo completo

Abstract (sommario):

Water coning is a complex phenomenon that depends on a large number of variables which include among others: production rate, perforation interval, mobility ratio, capillary pressure, etc. Its production can greatly affect the productivity of a well and the reservoir at large. In fractured reservoirs, the phenomenon is more complex owing to the high permeability of the fractures in the porous media. With this complexity in mind, water coning behaviour in fractured reservoir was studied by simulating a reservoir supported by a strong aquifer using ECLIPSE-100 Black-Oil Simulator. The water cut (WCT), oil production rate (OPR) and water saturation (BWSAT) at the producing interval (Block 1, 1, 7) were used to evaluate the coning phenomenon in a fractured reservoir. In the course of the study, sensitivity analyses on the modelled reservoir’s anisotropy ratio (kv/kh), production rate (q), storativity capacity (ω), fracture width (b) and fracture permeability (kf) were conducted to evaluate their effect on coning behaviour in fractured reservoir. The results obtained depict that while the anisotropy ratio is very significant in water cut and water saturation at the perforating interval it has no adverse effect on oil production rate. It was however, observed that the water cut and oil production rate decreased as the production rate (q) increased. Furthermore, the water cut, oil production rate and water saturation (BWSAT) from the fractured reservoir is sensitive to the storativity capacity (ω) depending on the fracture porosity (φf). Conversely, the fracture’s width (b) and permeability (kf) have no significant effect on the coning behaviour of the modelled fracture reservoir. However, anisotropy ratio (kv/kh), production rate as well as storativity capacity (ω) are significant parameters in evaluating coning phenomenon in fractured reservoirs.

Gli stili APA, Harvard, Vancouver, ISO e altri

Ayeni, Kolawole Babajide. "Empirical modeling and simulation of edgewater cusping and coning". Texas A&M University, 2008. http://hdl.handle.net/1969.1/85948.

Testo completo

Abstract (sommario):

In many cases, it is important to predict water production performance of oil wells early in, or maybe before, their production life. In as much as oil field water is important for pressure maintenance purposes and displacement of oil towards the perforation of the producing well, excessive water production leads to increased cost. In the case when no provision is made, it represents a significant liability. The case considered here is a well producing from a monocline with an edge-water aquifer. Although such problems can be computed with reservoir simulation, the objective of this work was to develop an empirical method of making water production predictions. The reservoir model was described as a single well producing from the top of a monocline drainage block with water drive from an infinite-acting aquifer. During the reservoir simulation runs, water would cusp and cone into the well, increasing water production and decreasing oil production. A number of simulation runs were made, varying eleven model variables. Typical model variables include dip angle, formation thickness and production rate. For each run a modified Addington-style plot was made. The relationship between each model parameter and three graphical variables was used to develop the set of empirical correlations. The empirical correlations developed were integrated with some derived equations that relate important reservoir parameters and incorporated into a computer program. The developed correlations and program can be used to carry out sensitivity analysis to evaluate various scenarios at the early planning stages when available reservoir data are limited. This gives a quick and easy method for forecasting production performance with an active edge-water drive. Furthermore, the approach developed in the research can be applied to other water production problems in other fields/reservoirs. The developed program was validated and used to evaluate synthetic and field cases. Overall, a good match was achieved.

Gli stili APA, Harvard, Vancouver, ISO e altri

Shevchenko, Egor. "Experimental study of water coning phenomenon in perforated pipes geometry". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-23086.

Testo completo

Abstract (sommario):

This Master Thesis is performed in close cooperation between NTNU and Statoil Research Centre in Rotvoll, Trondheim. It focuses on the experimental study of the water coning phenomenon in perforated pipe geometry. This study refers to Statoil data on horizontal well design, geometry of the ICD/AICD housing, production rates and fluid properties.The experimental facilities were designed during the autumn semester in the project ?Experimental setup for water coning in horizontal annular pipe geometries?. It is based on the 2D-configuration setup and was used for flow visualization experiments.The study provides extensive literature review of the problem. It describes existing industry experience and shows available academic research in the area of the coning phenomenon. Detailed hazard identification and risk assessments analysis were performed according to the NTNU and SINTEF safety procedures prior to starting of the work in the lab. The necessary measures for risk reduction were implemented. The event, possibly compromising safety level of the experimental runs, was documented and investigated in order to prevent similar reoccurrences in future.The total number of 459 experiments with different rig and oil/water flow setup was conducted. Results are presented in clear graphical form in excel spreadsheet attached to the thesis. It shows key trends in oil/water flow behaviour in the gap towards a drainage hole, representing reservoir fluid inflow into the well tubing through the Inflow Control Device (ICD). Discussion part puts emphasis on the explanation of the obtained results and provides important input to improve the design of ICD.

Gli stili APA, Harvard, Vancouver, ISO e altri

Khalili, Ali Petroleum engineering UNSW. "A review of critical coning rate correlations and identifying the most reliable equation". Awarded by:University of New South Wales. Petroleum engineering, 2005. http://handle.unsw.edu.au/1959.4/22388.

Testo completo

Abstract (sommario):

The study of coning in oil production is important because of huge water production associated with oil production around the world each year. Estimation of critical coning rate has been the subject of numerous studies and a number of correlations have been reported. This study presents a review of the current available methods for estimating critical coning rate for both vertical and horizontal wells. The various methods and correlations are compared and the assumptions on which they are based evaluated. Following comparison made between the correlations, the most reliable theories are identified for both vertical and horizontal wells separately. Among the correlations for vertical wells, this study recommends two implicit methods presented by Wheatley and Azar Nejad et al. They determined the oil potential distribution influenced by water cone with a remarkable accuracy. For horizontal wells, two methods, Joshi???s equation and Rechem et al formula, are considered to be the most reliable. Joshi???s equation provides lower estimates than Chaperon???s correlation in which the water cone effect on oil potential was neglected. The Recham et al formula also gives a similar result. On the whole, the Rechem et al method is preferred.

Gli stili APA, Harvard, Vancouver, ISO e altri

Couper, Christine Judith. "Morphology and physiology of bud development and coning in Pinus contorta Dougl". Thesis, University of Edinburgh, 1987. http://hdl.handle.net/1842/12010.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Selmi, Mohamed. "Resonance phenomena in viscous fluid configurations inside a spinning and coning cylinder". The Ohio State University, 1991. http://rave.ohiolink.edu/etdc/view?acc_num=osu1300360400.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Johnson, David Craig. "A coning motion apparatus for hydrodynamic model testing in a non-planar cross-flow". Thesis, Massachusetts Institute of Technology, 1989. http://hdl.handle.net/10945/25780.

Testo completo

Abstract (sommario):

As part of continuing research into the flow about slender bodies of revolution, a coning motion apparatus for hydrodynamic model testing was built and demonstrated. This is the first known use of a rotary balance apparatus for external flow hydrodynamic applications. The vorticity shed by the hull and appendages creates a wake field that interacts with the velocity distribution over the vehicle's surface. This in turn effects the surface pressure distribution and thus, when integrated over the body's surface, the total force on the hull/appendage combination. It is this interaction that prevents a closed-form analytic solution to the problem. Keywords: Fluid mechanics. (JES)

Gli stili APA, Harvard, Vancouver, ISO e altri

Isemin, Isemin Akpabio. "Numerical Simulation of Gas Coning of a Single Well Radial in a Naturally Fractured Reservoir". Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for petroleumsteknologi og anvendt geofysikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19275.

Testo completo

Abstract (sommario):

Gas coning is the tendency of the gas to drive oil downward in an inverse cone due to the downward movement of gas into the perforations of a producing well thereby reducing oil production and the overall recovery efficiency of the oil reservoir. This work addresses gas coning issues in a naturally fractured reservoir via a numerical simulation approach on a single-well radial cross-section using the ECLIPSE 100 reservoir simulator. Matrix and fracture properties are modelled. Critical rate, breakthrough time and GOR after breakthrough is determined which is used to investigate the effect of matrix and fracture properties on gas coning effective reservoir parameters such as oil flow rate, matrix and fracture porosity, vertical and horizontal matrix and fracture permeability, matrix block size, etc. Results show that reservoir parameters that affect coning include oil flow rate, matrix and fracture porosity, matrix and vertical permeability, anisotropy ratio, perforated interval thickness, density difference and mobility ratio. While matrix block size and fracture spacing have no significant effect on gas coning.

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Coning"

Maziat, Reza. Prediction of the aerodynamic characteristics of wings and bodies in coning motion. Manchester: University ofManchester, 1996.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Johnson, David Craig. A coning motion apparatus for hydrodynamic model testing in a non-planar cross-flow. Springfield, Va: Available from the National Technical Information Service, 1989.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Eccles, Thomas John. Measurement of hydrodynamic forces and moments and flow field mapping of a model in coning motion. Springfield, Va: Available from the National Technical Information Service, 1990.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Forster, Victor W. Conning the Canadians. Vancouver: V. Forster Pub., 1989.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Fusco, Gianni Di. Confine. Forli: Forum/Quinta Generazione, 1985.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Bofill, Rafael M. Joan Condins. Barcelona: Ambit Serveis Editorials, 1988.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Nunzio. Nunzio confini. Roma: Galleria dell'oca, 1991.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Concino Concini maresciallo d'Ancre: Ascesa e caduta di un gentiluomo toscano alla corte di Francia (1600-1617). Firenze, Italy: Aska, 2014.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Conng xian dai dao dang dai. Taibei Shi: San min shu ju, 1994.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Mignano, Salvatore. Ai confini dell'Austria. Firenze: Vallecchi Editore, 1987.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Coning"

Gooch, Jan W. "Coning". In Encyclopedic Dictionary of Polymers, 166. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_2834.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Bradbury, Andrew. "Coning Hybridoma cDNA by RACE". In Antibody Engineering, 15–20. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-01144-3_2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Liu, Baoqing, e Huimin Dong. "A Method for Evaluation of Coning Error Based on Adaptive Cone". In Intelligent Robotics and Applications, 640–49. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-88518-4_69.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rizvi, Farheen. "Solar Sail Coning Control to Induce Orbital Effects in Spinning Versus Non-spinning Sails". In Advances in Solar Sailing, 737–53. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-34907-2_45.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Fu, Ying, Zheng-jun Zhu, Chao Zhang, Tao Shi, Hui Ma e Kai Feng. "Research on Reasonable Water Injection Parameters of Water Flowing Barrier to Delay Bottom Water Coning". In Proceedings of the International Field Exploration and Development Conference 2018, 1066–72. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7127-1_98.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Zhu, Weiyao, Xiaohe Huang e Ming Yue. "A Modified Calculation Method for the Water Coning Simulation Mode in Oil Reservoirs with Bottom Water Drive". In Gas Injection for Disposal and Enhanced Recovery, 331–37. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118938607.ch19.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Stolleis, Michael. "Conring, Hermann". In Kindlers Literatur Lexikon (KLL), 1. Stuttgart: J.B. Metzler, 2020. http://dx.doi.org/10.1007/978-3-476-05728-0_11159-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Jennings, George A. "Conics". In Modern Geometry with Applications, 83–113. New York, NY: Springer New York, 1994. http://dx.doi.org/10.1007/978-1-4612-0855-6_3.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Bix, Robert. "Conics". In Conics and Cubics, 69–125. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-1-4757-2975-7_2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Beckett, Stephen T., Konstantinos Paggios e Ian Roberts. "Conching". In Beckett's Industrial Chocolate Manufacture and Use, 241–73. Chichester, UK: John Wiley & Sons, Ltd, 2017. http://dx.doi.org/10.1002/9781118923597.ch10.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Coning"

J. T. Floris, Frans. "Coning Simulation more Accurately". In ECMOR I - 1st European Conference on the Mathematics of Oil Recovery. European Association of Geoscientists & Engineers, 1989. http://dx.doi.org/10.3997/2214-4609.201411336.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

PLATUS, D. "Missile and spacecraft coning instabilities". In Astrodynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1992. http://dx.doi.org/10.2514/6.1992-4562.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

M. Stovas, A., e M. Landro. "4D Detection of Gas Coning". In 69th EAGE Conference and Exhibition incorporating SPE EUROPEC 2007. European Association of Geoscientists & Engineers, 2007. http://dx.doi.org/10.3997/2214-4609.201401777.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Al-Afaleg, N. I., e Iraj Ershaghi. "Coning Phenomena in Naturally Fractured Reservoirs". In SPE Western Regional Meeting. Society of Petroleum Engineers, 1993. http://dx.doi.org/10.2118/26083-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Leemhuis, Anton Peter, Stefan Belfroid e Garrelt Alberts. "Gas Coning Control for Smart Wells". In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2007. http://dx.doi.org/10.2118/110317-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Egbe, ThankGod, e Dulu Appah. "Water Coning Diagnosis Using Spectral Analysis". In Nigeria Annual International Conference and Exhibition. Society of Petroleum Engineers, 2005. http://dx.doi.org/10.2118/98816-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Permadi, P. "Fast Horizontal-Well Coning Evaluation Method". In SPE Asia Pacific Oil and Gas Conference. Society of Petroleum Engineers, 1996. http://dx.doi.org/10.2118/37032-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

ERICSSON, L. "Prediction of slender body coning characteristics". In 7th Applied Aerodynamics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1989. http://dx.doi.org/10.2514/6.1989-2223.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Papatzacos, Paul. "Gas-Coning by a Horizontal Well". In ECMOR I - 1st European Conference on the Mathematics of Oil Recovery. European Association of Geoscientists & Engineers, 1989. http://dx.doi.org/10.3997/2214-4609.201411344.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Saad, Saad El-Din M., Tarek D. Darwich e Yousri Asaad. "Water Coning in Fractured Basement Reservoirs". In Middle East Oil Show. Society of Petroleum Engineers, 1995. http://dx.doi.org/10.2118/29808-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Coning"

Platus, D. H. Missile and Spacecraft Coning Instabilities. Fort Belvoir, VA: Defense Technical Information Center, febbraio 1998. http://dx.doi.org/10.21236/ada349546.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Cooper, Gene R. Moments on a Coning Projectile by a Spinning Liquid in Porous Media. Fort Belvoir, VA: Defense Technical Information Center, settembre 2005. http://dx.doi.org/10.21236/ada444065.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Cooper, Gene R. Moments on a Coning M864 by a Liquid Payload: The Candlestick Problem and Porous Media. Fort Belvoir, VA: Defense Technical Information Center, luglio 2006. http://dx.doi.org/10.21236/ada453380.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Bashelor, Andrew Clark. Enumerative Algebraic Geometry: Counting Conics. Fort Belvoir, VA: Defense Technical Information Center, maggio 2005. http://dx.doi.org/10.21236/ada437184.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Soanes, Royce W. Thrice Differentiable Affine Conic Spline Interpolation. Fort Belvoir, VA: Defense Technical Information Center, settembre 1995. http://dx.doi.org/10.21236/ada304778.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Piper, L. G., S. J. Davis, H. C. Murphy, W. C. Cummings e L. P. Walkauskas. CONAN; Chemistry of Nitrogen-A Nascence. Fort Belvoir, VA: Defense Technical Information Center, gennaio 1988. http://dx.doi.org/10.21236/ada193122.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Terlaky, Tamas. Mixed-Integer Conic Linear Programming: Challenges and Perspectives. Fort Belvoir, VA: Defense Technical Information Center, ottobre 2013. http://dx.doi.org/10.21236/ada590477.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

McCune, W., e R. Padmanabhan. An equational characterization of the conic construction of cubic curves. Office of Scientific and Technical Information (OSTI), maggio 1995. http://dx.doi.org/10.2172/516005.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Mittelmann, Hans D. Nonlinear Multidimensional Assignment Problems Efficient Conic Optimization Methods and Applications. Fort Belvoir, VA: Defense Technical Information Center, giugno 2015. http://dx.doi.org/10.21236/ada627005.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Bendito, Enrique, Mark J. Bowick e Agustin Medina. A Natural Parameterization of the Roulettes of the Conics Generating the Delaunay Surfaces. Jgsp, 2014. http://dx.doi.org/10.7546/jgsp-33-2014-27-45.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!