Bibliografie tematiche / Computerized process control

Letteratura scientifica selezionata sul tema "Computerized process control"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 21 febbraio 2023

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Computerized process control".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Computerized process control"

W. Stanley Anthony. "COMPUTERIZED GIN PROCESS CONTROL". Applied Engineering in Agriculture 6, n. 1 (1990): 12–18. http://dx.doi.org/10.13031/2013.26337.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Stover, Enos L., e Christopher K. Campana. "Computerized Biological Treatment Operational Process Control". Water Science and Technology 24, n. 6 (1 settembre 1991): 323–30. http://dx.doi.org/10.2166/wst.1991.0172.

Testo completo

Abstract (sommario):

An integrated data management and operational process control system has been developed to assist in operations of biological wastewater treatment plants. Bio-kinetic process control equations provide daily operational strategies based on moving analysis of plant performance. Statistical analysis of trends and simulation add additional analytical power to the package. Diagnostic and predictive Expert System capabilities are also being developed to assist in plant operations.

Gli stili APA, Harvard, Vancouver, ISO e altri

Vladut, Gabriel, Vasile Ogarlaci, Doru Bucur e Marin Smarandache. "Computerized assistance for decisional and process control in surface mining". IFAC Proceedings Volumes 33, n. 22 (agosto 2000): 329–33. http://dx.doi.org/10.1016/s1474-6670(17)37015-5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Al Salaimeh, Safwan. "MATHEMATICAL MODELS FOR COMPUTERIZED CONTROL SYSTEM". Gulustan-Black Sea Scientific Journal of Academic Research 48, n. 05 (5 luglio 2019): 119–23. http://dx.doi.org/10.36962/gbssjar119.

Testo completo

Abstract (sommario):

The software is a set of mathematical methods, and algorithms of information processing, which used in creating the control system. When designing control systems, Initial data for the design of control system. The tasks of the computerized control system are understood as a part of the computerized functions of the computerized control system characterized by the outcomes and outputs in specific form. control function is: commutative action for computerized control system, aimed to achieve a criterion goal. Depending on the properties of the process and their mathematical description can be combined into different classes; This paper shows the designing the mathematical models which need to computerized control systems (models (3) – (8)). In the same time this paper shows the main methods which were used to formulate the mathematical models as: • Stochastic and deterministic; • One dimensional and multidimensional; • Linear and nonlinear; • Static and dynamic; • Stationary and non – stationary; • With distributed and lumped parameters.

Gli stili APA, Harvard, Vancouver, ISO e altri

Matveeva, Е. A., e S. G. Simagina. "Manufacturing Process Optimization at Enterprises". Key Engineering Materials 684 (febbraio 2016): 409–13. http://dx.doi.org/10.4028/www.scientific.net/kem.684.409.

Testo completo

Abstract (sommario):

The article deals with competitiveness ensuring of enterprises at the expense of computerized control systems creation in production of highly engineered products on the basis of solving optimization problems on product startup estimation, estimation and redistribution of machine utilization, manufacturing process modelling.

Gli stili APA, Harvard, Vancouver, ISO e altri

Chen, Jason, Ming-Hsien Yang e Tian-Lih Koo. "A Control-Data-Mapping Entity-Relationship Model for Internal Controls Construction in Database Design". International Journal of Knowledge-Based Organizations 4, n. 2 (aprile 2014): 20–36. http://dx.doi.org/10.4018/ijkbo.2014040102.

Testo completo

Abstract (sommario):

The internal controls construction of a transaction system is important to management, operation and auditing. In the environment of manual operation, the internal controls of the transaction process are all done by manual mechanism. However, after the transaction processing environment has been changed from manual operation to computerized operation, the internal control techniques have been gradually transformed from manual mechanisms to computerized methods. The essence of internal controls in operational activities is the data expressions or constraints. The adoption of information systems often results in internal control deficiencies and operating risks due to the data unavailable in database for the data expressions of internal controls. Hence, how to design database schema to support internal controls mechanism is becoming a crucial issue for a computerized enterprise. Therefore, this paper referred Entity-Relationship model (ER model) in order to propose a Control-Data-Mapping Entity-relationship (CDMER) model by manipulating the required fields of tables to design database to support internal controls construction. Finally, a simple simulated case is prepared for illustration of the CDMER model. The contribution of this paper is to enhance the reliability of information systems through internal controls construction by applying the model to design databases.

Gli stili APA, Harvard, Vancouver, ISO e altri

Morozov, V., V. Avdochin, V. Stolyarov e L. Delgerba. "Application of Computerized Models for Optimizing Automatic Control Systems of Flotation Process". IFAC Proceedings Volumes 39, n. 22 (settembre 2006): 220–25. http://dx.doi.org/10.1016/s1474-6670(17)30140-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Dumont, Cheryl, e Cheryl Bourguignon. "Effect of a Computerized Insulin Dose Calculator on the Process of Glycemic Control". American Journal of Critical Care 21, n. 2 (1 marzo 2012): 106–15. http://dx.doi.org/10.4037/ajcc2012956.

Testo completo

Abstract (sommario):

Background Glycemic control is important to patients’ outcomes. However, the process of maintaining glycemic control is risk laden and labor intensive for nurses. Objectives To examine the effects of using a computerized insulin dose calculator to facilitate management of glycemic control for critically ill cardiac patients. Methods A prospective randomized controlled trial was conducted with a sample of 300 intensive care patients, 141 randomized to the calculator group and 159 in the control (paper protocol) group. A convenience sample of 44 intensive care nurses responded to a nurse satisfaction survey. Results A significantly higher percentage of glucose measurements were in the target range in the calculator group than in the control group (70.4% [SD, 15.2%] vs 61.6% [SD, 17.9%], Z = −4.423, P < .001), and glucose variance was significantly less in the calculator group (35.5 [SD, 18.3] mg/dL vs 42.3 [SD, 21.2] mg/dL, Z = −3.845, P < .001). Fewer hypoglycemic events occurred in the calculator group (7 vs 18), although this difference was not statistically significant. Nurse satisfaction was higher for the calculator group than for the control group (8.4 [SD, 1.4] vs 4.8 [SD, 2.4], Z = −5.055, P < .001). Nurses’ deviation from the protocol was also less in the calculator group than in the control group. Conclusions Management of glycemic control and nurse satisfaction were improved with use of the dose calculator. Improving nurses’ processes of care may improve nurses’ use of time and patient care overall. Studies with larger sample sizes over time are needed to determine these relationships.

Gli stili APA, Harvard, Vancouver, ISO e altri

Rubel, P., J. L. Willems e J. Fayn. "Management of Serial ECGs and Control Strategies for the Comparison Process". Methods of Information in Medicine 33, n. 01 (1994): 148–52. http://dx.doi.org/10.1055/s-0038-1634974.

Testo completo

Abstract (sommario):

Abstract:Serial ECG management and control of the comparison process should be dynamically driven by patient data. The functional architecture requirements are specified for a computerized ECG processing system integrating serial analysis. The concepts of reference investigations and temporal events are first explained. A conceptual reference model is proposed which stratifies the serial analysis process into a few generic strategies which will be instantiated into several types of serial comparison processing tasks as a function of the clinical evolution of the patient. This model is an extension of the OEDIPE core data model developed and implemented during the AIM #2026 project.

Gli stili APA, Harvard, Vancouver, ISO e altri

Andrews, J. D., e J. J. Henry. "A computerized fault tree construction methodology". Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 211, n. 3 (1 agosto 1997): 171–83. http://dx.doi.org/10.1243/0954408971529656.

Testo completo

Abstract (sommario):

A new approach to automating the fault tree construction process is proposed. The methodology has features which make it applicable to binary state systems and also to process control systems. Previous attempts to model the failure generation in systems have worked well on only a small sub-class of system types and have failed to produce a generally applicable method. Thus in some previous approaches there are desirable features which are worth retaining in a new construction method. The new method is based on the flexibility of the decision table method but incorporates a way of detecting, classifying and analysing control loops, similar to that used with operators in the digraph approach. As well as using operators to deal with control loops a new operator is introduced that deals with two-state circuits. This will mean that when constructing the fault trees, the difficulty of handling repeated events will be eliminated and the size of the tree structures will be significantly reduced. The developed algorithm can produce a tree format appropriate for direct input to an analysis code. The method is demonstrated in this paper by its application to a simplified safety system from the railway industry. This system has been selected as it exhibits features that are typical of two-state circuitry but is also small enough to illustrate the new developments introduced.

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Computerized process control"

Mkondweni, Ncedo Sandiso. "Design and implementation of linear robust networked control systems". Thesis, Cape Peninsula University of Technology, 2013. http://hdl.handle.net/20.500.11838/1195.

Testo completo

Abstract (sommario):

Thesis submitted in fulfilment of the requirements for the degree Doctor of Technology: Electrical Engineering in the Faculty of Engineering at the Cape Peninsula University of Technology, 2013
Networked Control Systems is a control system where the plant and the controller exchange information via a shared communication network and the network is considered as part of the closed loop control system. Unfortunately the network introduces network induced random varying time delays and data packet loss amongst the communication network imperfections. The network delays are considered to be between the controller and the actuator and between the sensor and the controller. These network imperfections degrade the performance of the closed loop control system and result in closed loop system instability. The complexity of measuring the communication network imperfection in networked control systems makes it difficult for the control engineers to develop methods for design of controllers that can incorporate and compensate these imperfections in order to improve the performance of the networked control systems. In this thesis a co-simulation toolset called LabNS2 is developed to address the first problem of measuring the communication network imperfections by providing an ideal environment that can be used to investigate the influence of network time delays or packet loss. The software environment of the toolset is based on LabVIEWTM and Network Simulator Version 2 (NS2). A new robust predictive optimal controller design method is developed to address the problem of the destabilising effect of the network induced time delay between the controller and the actuator. The design approach is based on time shifting of the optimisation horizon and a state predictor. The design of the controller is based on a model of the plant with delay in the control vector equal to the delay between the controller and the actuator or to the sum of the delays between the controller and the actuator and between the sensor and the controller. The time shifting approach allows the design of the controller to be performed for a model without time delay. Then the control action is based on the future values of the state space vector estimates. The state predictor is developed to predict these future values of the state using the present and past values of the state estimates and control actions. This technique is made possible by the use of the plant model Transition Matrix. A Discrete Kalman Filter is modified to address the problem of the destabilising effect of the network induced time delay between the sensor and the controller. An additional state estimation vector is added to the filter estimate at every current moment of time. iv The developed methods are implemented for networked control of a dish antenna driven by two stepper motors. The outcomes of the thesis can be used for the education and fundamental research purposes, but the developed control strategies have significant sense towards the Square Kilometer Array projects and satellite systems industry.
National Research Foundation

Gli stili APA, Harvard, Vancouver, ISO e altri

Farias, Missilene da Silva. "Projeto de controlador adaptativo via otimização por enxame de partículas aplicado a sistemas multivariáveis de quarta ordem". Universidade Federal Rural do Semi-Árido, 2015. http://bdtd.ufersa.edu.br:80/tede/handle/tede/536.

Testo completo

Abstract (sommario):

Made available in DSpace on 2016-08-31T13:33:45Z (GMT). No. of bitstreams: 1 MissileneSF_Dissert.pdf: 1294524 bytes, checksum: b3601c72fef0c8416a12dd43f864d044 (MD5) Previous issue date: 2015-02-27
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
The proposal for this study is to obtain an adaptive controller by feedback states for fourth order time-varyng multivariable systems or with parametric uncertainty. Alternatively the difficulties and limitations involving the usual methods of synthesis of optimal controllers for this class of systems, through the investigation of an algorithm based on particles swarm optimization with good tuning of parameters, we seek to define a flexible structure for applications that require decision making and online estimation of the feedback matrix parameters. The controller developed should provide, for every execution, not only system stability, but at the same time, provides compliance to the performance indexes set, without the need to perform complex and expensive mathematical calculations, eliminating thus the subjective components of analysis and design
É proposta neste trabalho a obtenção de um controlador adaptativo por realimentação de estados para sistemas multivariáveis de quarta ordem variantes no tempo e com incertezas paramétricas. Em alternativa às dificuldades e limitações envolvendo os métodos usuais de síntese de controladores ótimos para esta classe de sistemas, por meio da investigação de um algoritmo baseado na otimização por enxame de partículas com boa sintonia dos parâmetros, busca-se a definição de uma estrutura flexível destinada a aplicações que demandem a tomada de decisão e estimação em tempo real dos parâmetros da matriz de realimentação. O controlador desenvolvido deverá fornecer, a cada execução, não somente estabilidade ao sistema, mas ao mesmo tempo, propiciar observância aos índices de desempenho fixados, sem a necessidade da realização de cálculos matemáticos complexos e dispendiosos, eliminando, dessa forma, as componentes subjetivas de análise e projeto

Gli stili APA, Harvard, Vancouver, ISO e altri

SOARES, JOSE R. "Desenvolvimento de sistema para seguimento de produto e aquisicao de dados do processo de irradiacao em irradiadores de grande porte". reponame:Repositório Institucional do IPEN, 2010. http://repositorio.ipen.br:8080/xmlui/handle/123456789/11531.

Testo completo

Abstract (sommario):

Made available in DSpace on 2014-10-09T12:52:56Z (GMT). No. of bitstreams: 0
Made available in DSpace on 2014-10-09T14:01:56Z (GMT). No. of bitstreams: 0
Tese (Doutoramento)
IPEN/T
Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Gli stili APA, Harvard, Vancouver, ISO e altri

Creti, Christian. "Fermentation méthanique et désulfuration de gaz par voie bactérienne : proposition d'un bioréacteur de désulfuration, optimisation des deux opérations du procédé". Paris 6, 1986. http://www.theses.fr/1986PA066309.

Testo completo

Abstract (sommario):

Conception et réalisation d'un pilote de laboratoire de 20 litres, garni de supports bactériens en PVC, en vue de produire du biogaz (avec des teneurs en H2s au moins égales à 0,3%. ) Emploi de déchets agro-alimentaires riches en sulfates. L'automatisation est réalisée en connectant des capteurs et des actionneurs à un ordinateur industriel. Le biogaz produit passe en continu et en ligne dans un bioréacteur de désulfuration en molécules organiques. Proposition d'un modèle intégrant les différentes vitesses de réaction. Perspectives de synthèse de molécules à haute valeur ajoutée.

Gli stili APA, Harvard, Vancouver, ISO e altri

Chen, Pao-Tien, e 陳寶田. "A Study of Information Security for Computerized Process Control". Thesis, 2008. http://ndltd.ncl.edu.tw/handle/qb44gn.

Testo completo

Abstract (sommario):

碩士
國立中山大學
資訊管理學系研究所
96
In manufacturing industrial, for example, petrochemical plant, the promotion of technology makes manufacturing process computerization to be possible. The systems which control the manufacturing process are called Process Control System. Enterprises introduce the projects of process improvement to reduce the operation cost and enhance the product quality. It is necessary to have comprehensive information and technology to support the success of project for process improvement. Thus, it is a trend to setup the connections among Process Control Network, Process Information Network and Intranet. Due to the connections among networks, Process Control System is facing the threats of computer viruses, worms, attackers, and other malicious codes. Process Control System controls the manufacturing process base on the instructions issued from operators to maintain plant operations in a safe condition. Process Control System is the kernel of process operations. If Process Control System is being attacked or infected by computer viruses, the impacts would be the disclosure of critical business information, the failure of servers/workstations for monitoring process, or Process Control System fails totally that result in the plant operations with risky. The worst case would be an incident about pollution of environment, explosion, properties destroyed, or life lost. Therefore, enterprise should focus on reinforcing the information security mechanism of Process Control System to ensure plant operations reliably and safely. The objectives of this study are: a) To realize the challenges and threats that Process Control System is facing by the way of literature review. b) To discuss information security management related issues and resolutions of Process Control System base on physical, network, and servers respectively. c) To discuss the efficiency of the model of information security management that has been implemented in the enterprise. d) To make this study as a reference for related industries.

Gli stili APA, Harvard, Vancouver, ISO e altri

Huang, Shih-Pu, e 黃士溥. "The Study of Optimization on Process Parameters of High Accuracy Computerized Numerical Control Polishing". Thesis, 2016. http://ndltd.ncl.edu.tw/handle/72693565258076677961.

Testo completo

Abstract (sommario):

碩士
國立臺灣大學
機械工程學研究所
104
Polishing is the grinding technique which can produce the ultra-precision smooth mirror surface. The technique, directly or indirectly, is on behalf of a national machinery manufacturing standards. Belonging back end of line (BEOL) processing optical element production, polishing plays an important role in improving performance not only the quality of life but development of high-tech products. The domestic polishing technique for spherical lens has reached certain level, but spherical lens still have some problem like chromatic aberration and distortion. To solve this kinds of problem, aspherical lens, which cannot be manufacture by traditional polishing technique and can only be fabricate by computer-aided polishing, are used to improve image quality and decrease optical system volume. Computer-aided polishing is studied in this paper. Focusing on surface texture, association between polishing parameters and surface quality are discussed by material removal experiments. For computer-aided polishing fabrication, surface feed rates of polishing bonnet are not the crucial factor of surface texture. And, mid-spatial frequency error can be effectively eliminated by replacing one-direction path by multiple-direction paths. Values of surface’s peak-to-valley and root-mean-square can also be reduced. The cost of polishing process can also be declined at the same time. Hope that this research can promote the development of high accuracy polishing technique and domestic polishing apparatus.

Gli stili APA, Harvard, Vancouver, ISO e altri

Bird, Frank William, University of Western Sydney, College of Health and Science e School of Engineering. "Computerised electro-mechanical control of the UWS astronomical telescope and the integration of a multi-tasking television system". 2005. http://handle.uws.edu.au:8081/1959.7/23090.

Testo completo

Abstract (sommario):

Obtaining a very high level of precision and sophistication in automated computer control is now available inexpensively from a variety of hardware and software sources. Applying this automated technology to an astronomical telescope broadens the scope of applications of the instrument, particularly in areas such as photo electrics, CCD imaging and remote control. The ultimate design goal of the UWS telescope was that of full roboticism, giving access of the facility to off campus clients both in Australia and overseas. The first phase towards full robotic control is automation of the required optical and mechanical parameters, providing precision targeting and object tracking. This thesis describes the mechanical aspects of the UWS telescope and the procedures and equipment involved in its automation, including the drive system, electro mechanical design and associated computer hardware and software. Sample performance test data shows that using a high percentage of inexpensive proprietary robotics components, a very sophisticated and accurate measuring device can be produced.
Master of Science (Hons.)

Gli stili APA, Harvard, Vancouver, ISO e altri

Bird, Frank William. "Computerised electro-mechanical control of the UWS astronomical telescope and the integration of a multi-tasking television system". Thesis, 2005. http://handle.uws.edu.au:8081/1959.7/23090.

Testo completo

Abstract (sommario):

Gli stili APA, Harvard, Vancouver, ISO e altri

Libri sul tema "Computerized process control"

W, Bernard John, a cura di. Computer control strategies for the fluid process industries. Research Triangle Park, N.C: Instrument Society of America, 1990.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Meijer, Rob R. The use of statistical process control-charts for person-fit analysis in computerized adaptive testing. Newtown, Pa: Law School Admission Council, 2003.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

M, Sacha Krzysztof, a cura di. Real-time systems: Implementation of industrial computerised process automation. Singapore: World Scientific, 1992.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

1947-, Schilp Jill Lenk, e Gilbreath Roy E. 1953-, a cura di. Health data quest: How to find and use data for performance improvement. San Francisco: Jossey-Bass Publishers, 2000.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Sacha, Krzysztof M., e Wolfgang A. Halang. Real-Time Systems: Implementation of Industrial Computerized Process Automation. World Scientific Pub Co Inc, 1993.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Datamyte. Datamyte Handbook: A Practical Guide to Computerized Data Collection for Statistical Process Control. Datamyte Corporation, 1987.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Center, Ames Research, a cura di. Tolerating failures of continuous-valued sensors. Ithaca, N.Y: Cornell University, Dept. of Computer Science, 1990.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Schilp, Jill Lenk, Roy E. Gilbreath, Jill Schilp e Roy Gilbreath. Health Data Quest : How to Find and Use Data for Performance Improvement. Jossey-Bass, 2000.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Capitoli di libri sul tema "Computerized process control"

Wisniewski, Zbigniew, e Artur Blaszczyk. "Conditioning of Computerized Maintenance Management Systems Implementation". In Advances in Manufacturing, Production Management and Process Control, 486–94. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-20494-5_46.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

van Krimpen-Stoop, Edith M. L. A., e Rob R. Meijer. "Detecting Person Misfit in Adaptive Testing Using Statistical Process Control Techniques". In Computerized Adaptive Testing: Theory and Practice, 201–19. Dordrecht: Springer Netherlands, 2000. http://dx.doi.org/10.1007/0-306-47531-6_11.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Mishra, Atmanand, Dinesh Kumar Kasdekar e Sharad Agrawal. "Empirical Modeling and Multi-objective Optimization of 7075 Metal Matrix Composites on Machining of Computerized Numerical Control Wire Electrical Discharge Machining Process". In Algorithms for Intelligent Systems, 205–18. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0426-6_22.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

C., Sivamathi, e Vijayarani S. "Promoting Business Activities Using Utility Mining Techniques". In Handbook of Research on Promoting Business Process Improvement Through Inventory Control Techniques, 520–33. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-3232-3.ch027.

Testo completo

Abstract (sommario):

Inventory control can be defined as the process of inspecting stocks in a shop. Today even small and mid-sized businesses are using computerized inventory management systems for their business. Data mining discovers the knowledge and patterns which are potentially useful and previously unknown. Utility mining is one of the recent emerging fields in data mining. It incorporates usefulness of the knowledge or pattern retrieved. Such usefulness of the knowledge retrieved is termed as utility. In retail industry, utility mining can be used to retrieve highly profitable product in a market. Identifying such profitable products helps in better decision in inventory management. This chapter discusses how utility mining concepts can be implemented in inventory control.

Gli stili APA, Harvard, Vancouver, ISO e altri

Asadi Ghanbari, Abdolreza, Mousa Mohammadnia, S. Abbas Sadatinejad e Hossein Alaei. "A Survey on Weapon Target Allocation Models and Applications". In Computational Optimization Techniques and Applications. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.96318.

Testo completo

Abstract (sommario):

In Command and Control (C2), Threat Evaluation (TE) and Weapon Target Allocation (WTA) are two key components. To build an automated system in this area after modeling Threat Evaluation and Weapon Target Allocation processes, solving these models and finding the optimal solution are further important issues. This setting demands instantaneous operational planning and decision making under inherent severe stress conditions. The associated responsibilities are usually divided among a number of operators and also computerized decision support systems that aid these operators during the decision making process. In this Chapter, the literature in the area of WTA system with the emphasis on the modeling and solving methods are surveyed.

Gli stili APA, Harvard, Vancouver, ISO e altri

Sierpińska, Teresa. "The Management of Advanced Tooth Wear Using the T-Scan/BioEMG Synchronization Module". In Handbook of Research on Computerized Occlusal Analysis Technology Applications in Dental Medicine, 467–521. IGI Global, 2015. http://dx.doi.org/10.4018/978-1-4666-6587-3.ch010.

Testo completo

Abstract (sommario):

Tooth wear is considered a normal, age dependent, physiological process that leads to the loss of enamel and dentine. However, in some cases the process is so progressive that it may be pathologic. The focus of this chapter is to present the consequences of advanced tooth wear resultant from parafunction, excessive masticatory forces, imbalanced occlusal contacts, and hyperactive masticatory muscles. This chapter also outlines preventative strategies that can predictably reduce the progression of pathologic wear, which employ the T-Scan 8/BioEMG synchronization module. These two objective companion technologies assess the occlusion before, during, and after dental treatment, as well as predictably control the long-term stability of newly installed fixed, implant-supported, or removable prostheses. Their synchronization correlates muscle activity level information directly to occlusal contact force and time-sequencing information, which when applied together in the wear patient can be instrumental in tempering and eliminating pathologic occlusal wear.

Gli stili APA, Harvard, Vancouver, ISO e altri

Paul, Pinki, e Balgopal Singh. "Adequacy of Instructing Learning Post-Covid 19 Pandemic". In Emerging Realities and the Future of Technology in the Classroom, 261–74. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-6480-6.ch015.

Testo completo

Abstract (sommario):

The COVID-19 pandemic has been the biggest test of the world since Second World War. The novel coronavirus (SARS-CoV-2) ailment causes severe respiratory issues. Nowadays, all the colleges and schools utilize e-learning processes to advance their studies. It has had a remarkable effect on the instruction area, where students are accustomed to going to these schools or universities. In any case, as the circumstance is beyond our control, the college has no alternative but to proceed. This will continue as an elective method of study in the post-pandemic circumstance. In the 21st century, computerized time and information communication technology (ICT) use in the study hall is fundamental for giving students different chances to learn. To procure the most elevated correspondence level in school guaranteed that modernized education learning process where data innovation as a subset of data and interchanges innovation. In this way, to keep up this convention, one should proceed with the e-assets, similar to google study hall, Microsoft teams, class in skype, or any other applications. The authors intended to provide brief knowledge about the COVID-19 pandemic; the international education system classification and need for global education systems have to transfer from traditional to digital platforms. The common problems involved in the digital learning platform, irrespective of the system's international educational classification, have concluded.

Gli stili APA, Harvard, Vancouver, ISO e altri

BYE, A., S. NILSEN, F. HANDELSBY e T. WINSNES. "COAST - COMPUTERISED ALARM SYSTEM TOOLBOX". In Computer Software Structures Integrating Ai/kbs Systems in Process Control, 145–50. Elsevier, 1994. http://dx.doi.org/10.1016/b978-0-08-042360-9.50026-9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Osman, Mohammed A., Ashraf Darwish, Ayman E. Khedr, Atef Z. Ghalwash e Aboul Ella Hassanien. "Enhanced Breast Cancer Diagnosis System Using Fuzzy Clustering Means Approach in Digital Mammography". In Handbook of Research on Machine Learning Innovations and Trends, 925–41. IGI Global, 2017. http://dx.doi.org/10.4018/978-1-5225-2229-4.ch041.

Testo completo

Abstract (sommario):

Breast cancer or malignant breast neoplasm is the most common type of cancer in women. Researchers are not sure of the exact cause of breast cancer. If the cancer can be detected early, the options of treatment and the chances of total recovery will increase. Computer Aided Diagnostic (CAD) systems can help the researchers and specialists in detecting the abnormalities early. The main goal of computerized breast cancer detection in digital mammography is to identify the presence of abnormalities such as mass lesions and Micro calcification Clusters (MCCs). Early detection and diagnosis of breast cancer represent the key for breast cancer control and can increase the success of treatment. This chapter investigates a new CAD system for the diagnosis process of benign and malignant breast tumors from digital mammography. X-ray mammograms are considered the most effective and reliable method in early detection of breast cancer. In this chapter, the breast tumor is segmented from medical image using Fuzzy Clustering Means (FCM) and the features for mammogram images are extracted. The results of this work showed that these features are used to train the classifier to classify tumors. The effectiveness and performance of this work is examined using classification accuracy, sensitivity and specificity and the practical part of the proposed system distinguishes tumors with high accuracy.

Gli stili APA, Harvard, Vancouver, ISO e altri

Osman, Mohammed A., Ashraf Darwish, Ayman E. Khedr, Atef Z. Ghalwash e Aboul Ella Hassanien. "Enhanced Breast Cancer Diagnosis System Using Fuzzy Clustering Means Approach in Digital Mammography". In Computer Vision, 1968–84. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-5204-8.ch085.

Testo completo

Abstract (sommario):

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Computerized process control"

O'Shaughnessy, P. "304. Computerized Control of an Aerosol Production Process". In AIHce 1999. AIHA, 1999. http://dx.doi.org/10.3320/1.2763154.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ritter, G. L., S. R. Lowry e C. R. Anderson. "Quality Control And Process Monitoring With FT-IR Spectroscopy". In 1985 International Conference on Fourier and Computerized Infrared Spectroscopy, a cura di David G. Cameron e Jeannette G. Grasselli. SPIE, 1985. http://dx.doi.org/10.1117/12.970859.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Davies, A. M. C., S. M. Ring, J. Franklin, A. Grant e W. F. McClure. "Prospects For Process Control Using Fourier Transformed Near Infrared Data". In 1985 International Conference on Fourier and Computerized Infrared Spectroscopy, a cura di David G. Cameron e Jeannette G. Grasselli. SPIE, 1985. http://dx.doi.org/10.1117/12.970838.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Coates, John. "The Role Of Infrared Spectroscopy In Quality Control And Chemical Process Analysis - New Applications For FT-IR Spectrometers". In Intl Conf on Fourier and Computerized Infrared Spectroscopy, a cura di David G. Cameron. SPIE, 1989. http://dx.doi.org/10.1117/12.969382.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Huang, Wei-Ren, Wei-Yao Hsu, Ching-Hsiang Kuo, Zong-Ru Yu, Yi-Chun Lin, Tsung-Yueh Tsai, Shih-Pu Huang e Hong-Tsu Young. "The study of optimization on process parameters of high-accuracy computerized numerical control polishing". In Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems, a cura di Pascal Hallibert, Tony B. Hull e Dae Wook Kim. SPIE, 2017. http://dx.doi.org/10.1117/12.2272529.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Groppetti, Roberto, e Giuseppe Comi. "Contribution to Computer Control and Optimization of Hydro-Abrasive Jet Machining Process". In ASME 1991 International Computers in Engineering Conference and Exposition. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/cie1991-0175.

Testo completo

Abstract (sommario):

Abstract Hydro-Abrasive Jet Machining (HAJM) has demonstrated its suitability for several applications in the machining of a wide spectrum of materials (metals, polymers, ceramics, fibre reinforced composites, etc.). The paper is a contribution to the computer control, integration and optimization of HAJM process in order to establish a hierarchical control architecture and a platform for the implementation of a real-time Adaptive Control Optimization (ACO) module. The paper presents the approach followed and the main results obtained during the development and implementation of a HAJM cell and its computerized controller. A critical analysis of the process variables available in the literature is presented, in order to identify the process variables and to define a process model suitable for HAJM real-time control and optimization. Besides for HAJM computer control, in order to correlate process variables and parameters with machining results, a process model and an optimization procedure are necessary in order to avoid expensive and time-consuming experiments for the determination of optimal machining conditions. The paper presents the configuration of the cell and the specific components adopted in order to make possible a fully computerized control of the process, and the architecture of the controller, capable to manage the several logical and analogical signals from the different modules of the cell, for multiprogramming, process monitoring, controlling, process parameters predetermination, process condition multiobjective optimization. A prediction and an optimization model is presented allowing the identification of optimal machining conditions using multiobjective programming. This model is based on the definition of an economy function and a productivity function, with suitable constraints relevant to the required machining quality, the required kerfing depth and the available resources. A test case based on experimental results is discussed in order to validate the model.

Gli stili APA, Harvard, Vancouver, ISO e altri

Zhang, Xuegang, Wei Liu, Hai Chang, Jianbo Wen, Yiqian Wu e Guanyin Wu. "Study for Application of Safety Soft Control and Information System in Highly-Integrated Control Rooms of CPR1000 NPP". In 2013 21st International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/icone21-15095.

Testo completo

Abstract (sommario):

For most of the newly built nuclear power plants, the computerized main control rooms (MCR) are adopted. The soft control, the typical feature of computerized Human-Interface System (HIS) in the computerized main control room and mediated by software rather than by direct physical connections, is comprised of safety and non-safety control interface which provides the operators with manual control for component-level, and allows both continuous control of plant process and discrete control of components in nuclear power plant. The safety soft control and information system (SSCIS) is used to give the safety commands to and check the immediate response of the safety process. This paper describes the application of the system design basis, functionality, communication, operation faceplate and system modes for SSCIS which is firstly introduced in CPR1000 nuclear power plant. The design criteria and basic design features of SSCIS is developed to be as the design basis of the design implementation. The ISG-04 ‘Highly-Integrated Control Rooms-Communications issues (HICRc)’ provides acceptable methods for addressing SSCIS communications in digital I&C system design. The NUREG0700 ‘Human-System Interface Design Review Guidelines’ is applied as reference for human factor engineering requirement in the SSCIS design. And the SSCIS design has also fully considered the possible customer usual practice.

Gli stili APA, Harvard, Vancouver, ISO e altri

Goryachikh, Vadim, Fahad Alghamdi e Abdulrahman Takrouni. "Compressor Computerized Performance Monitoring System CPMS". In SPE Middle East Oil & Gas Show and Conference. SPE, 2021. http://dx.doi.org/10.2118/204582-ms.

Testo completo

Abstract (sommario):

Abstract Background information Natural gas liquid (NGL) production facilities, typically, utilize turbo-expander-brake compressor (TE) to generate cold for C2+ separation from the natural gas by isentropic expansion of feed stream and use energy absorbed by expansion to compress residue gas. Experience shows that during operational phase TE can exposed to operation outside of design window that may lead to machine integrity loss and consequent impact on production. At the same time, there is a lack of performance indicators that help operator to monitor operating window of the machine and proactively identify performance deterioration. For instance, TE brake compressor side is always equipped with anti-surge protection system, including surge deviation alarms and trip. However, there is often gap in monitoring deviation from stonewall region. At the same time, in some of the designs (2×50% machines) likelihood of running brake compressor in stonewall is high during one machine trip or train start-up, turndown operating modes. Also, typical compressor performance monitoring systems does not have enough dynamic parameters that may indicate machine process process performance deterioration proactively (real-time calculation of actual polytrophic efficiency, absorbed power etc.) and help operator to take action before catastrophic failure occurs. In addition, typical compressor monitoring systems are based on assumed composition and fixed compressibility factor and do not reflect actual compositions variations that may affect machine performance monitoring. To overcome issues highlighted above, Hawiyah NGL (HNGL) team has developed computerized monitoring and advisory system to monitor the performance of turbo-expander-brake compressor, proactively, identify potentially unsafe conditions or performance deterioration and advice operators on taking necessary actions to avoid unscheduled deferment of production. Computerized performance monitoring system has been implemented in HNGL DCS (Yokogawa) and utilized by control room operators on day-to-day basis. Real-time calculation, analysis and outputs produced by performance monitoring system allow operator to understand how current operating condition are far from danger zone. Proactive deviation alarms and guide messages produce by the system in case of deviation help operators to control machine from entering unsafe region. Actual polytrophic efficiency, adsorbed power calculations provide machine condition status and allow identifying long-term performance deterioration trends.

Gli stili APA, Harvard, Vancouver, ISO e altri

Gavish a, Nirit, e Hagit Krisher b. "The Effect of Knowledge of Results during Computerized System Training". In Applied Human Factors and Ergonomics Conference. AHFE International, 2019. http://dx.doi.org/10.54941/ahfe100224.

Testo completo

Abstract (sommario):

The proliferation of commercial computerized systems to improve cognitive functions has helped many people, yet several key issues remain open. The current research focuses on the effect of feedback given to trainees in a computerized training system for visual attention. The visual attention skill was trained specifically to control temporal integration: a process in which a series of stimuli with a short break between them is combined together into one stimulus. Two training groups were compared: one with complete feedback during the training (Feedback group) and one without (No Feedback group), with 15 trainees in each group. The results demonstrated that the Feedback group’s performance was significantly poorer compared to the No Feedback group as assessed by the number of errors in new sets (measured during training). The deterioration observed in performance during training is not a common phenomenon. We explain these results by the theory of overconfidence. Based on the research results, we assert that giving feedback during cognitive computerized training can lead to undesirable consequences also in training, and should be re-considered.

Gli stili APA, Harvard, Vancouver, ISO e altri

Kim, Il Hwan, e Sang Chul Park. "Establishment of the Advanced Startup Turnover Process for New Nuclear Power Plants". In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25245.

Testo completo

Abstract (sommario):

This paper provides the management and technical issues of a successful turnover process from construction to the nuclear startup organization. The management issues include the development of effective organizations of construction completion group, turnover organization, enhancement of communication between the related groups, the systematic training programs for nurturing startup experts, and also the focused management of essential system turnover for each key event. The paper will also discuss other management issues required for successful systems turnover. Technical issues which will be addressed in this paper for successful turnovers will include the development of computerized Nuclear Power Construction Management System (NPCMS), three dimensional (3-D) CAD program, how to sub-scope the systems and partial turnover to expedite the system turnover, and the issues of maintaining the cleanliness of main control room and electrical equipment rooms.

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Computerized process control"

Diahyleva, Olena S., Igor V. Gritsuk, Olena Y. Kononova e Alona Y. Yurzhenko. Computerized adaptive testing in educational electronic environment of maritime higher education institutions. [б. в.], giugno 2021. http://dx.doi.org/10.31812/123456789/4448.

Testo completo

Abstract (sommario):

The article is devoted to the organization of modern learning process, namely the use of innovative technologies – computerized adaptive testing in educational electronic environment of maritime higher education institutions. The example of educational electronic environment is presented in the article on LMS Moodle. The provided new technological and methodological opportunities are a priority in the developed methods of control and testing of knowledge, skills and abilities of students. Comparative characteristic of using computerized adaptive testing in educational electronic environment is given in the article according to different criteria: the role of tests in the learning process; methods of training; equipment; presence of the problems in educational process; level of its control and learning outcomes. The paper also presents examples of activities to form communicative competency of future maritime professionals. Types of adaptive tests are listed in the paper. The research activities were done by second year cadets of ship engineering department of Maritime College of Kherson State Maritime Academy. The experiment was devoted to the formation of communicative competence with the help of electronic environment of maritime higher education institution. The results of experiment proved positive impact of computerized adaptive testing on communicative competence of future ship engineers. Further investigation of adaptive testing can also be done for learning system of maritime education establishments using simulation technologies of virtual, augmented and mixed realities.

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!