Letteratura scientifica selezionata sul tema "Composite materials C"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Composite materials C".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Composite materials C":
Okino, Fujio, e Michiya Ota. "Nano-C/C composite materials". TANSO 2006, n. 223 (2006): 206–14. http://dx.doi.org/10.7209/tanso.2006.206.
Kimura, Shiushichi, e Eiichi Yasuda. "Carbon fiber reinforced carbon composite materials C/C composite." Bulletin of the Japan Institute of Metals 24, n. 5 (1985): 403–9. http://dx.doi.org/10.2320/materia1962.24.403.
AWASTHI, SHRIKANT, e JERRY L. WOOD. "C/C Composite Materials for Aircraft Brakes". Advanced Ceramic Materials 3, n. 5 (settembre 1988): 449–51. http://dx.doi.org/10.1111/j.1551-2916.1988.tb00254.x.
Wang, Jing, Jun Cong Wei, Chun Mei Wang e Qing Qing Zhao. "SiO/C Composite Materials for Lithium-Ion Secondary Batteries". Advanced Materials Research 750-752 (agosto 2013): 1117–20. http://dx.doi.org/10.4028/www.scientific.net/amr.750-752.1117.
Li, Shengnan, Dong Du, Lei Zhang, Xiaoguo Song, Yongguang Zheng, Guoqin Huang e Weimin Long. "A review on filler materials for brazing of carbon-carbon composites". REVIEWS ON ADVANCED MATERIALS SCIENCE 60, n. 1 (1 gennaio 2021): 92–111. http://dx.doi.org/10.1515/rams-2021-0007.
Bui, Thi Hang, e Ha Thang Doan. "Fabrication and properties of Fe3O4/C composite materials". Ministry of Science and Technology, Vietnam 65 (25 novembre 2023): 52–56. http://dx.doi.org/10.31276/vjst.65(11).52-56.
Thakkar, Radhika, Anuj P. Maini, Sahil Mogla, Syed Shah Hussain Qadri, Praveen K. Varma e Alok Dubey. "Effect of Staining Beverages on Color Stability of Composite: A Spectrophotometric Study". Journal of Pharmacy and Bioallied Sciences 16, Suppl 1 (febbraio 2024): S389—S392. http://dx.doi.org/10.4103/jpbs.jpbs_611_23.
Wielage, Bernhard, Daisy Weber, Tobias Müller e Heike Steger. "Thermo-Mechanical Monitoring of Composite Materials during the Pyrolysis of C/C Composites". Key Engineering Materials 425 (gennaio 2010): 95–105. http://dx.doi.org/10.4028/www.scientific.net/kem.425.95.
Krnel, Kristoffer, Zmago Stadler e Tomaž Kosmač. "The Influence of SiC Nano-Precipitates on the Interface Structure in C/C-SiC Composites". Advances in Science and Technology 50 (ottobre 2006): 46–50. http://dx.doi.org/10.4028/www.scientific.net/ast.50.46.
Yevtushenko, Aleksander, Michal Kuciej e Katarzyna Topczewska. "Frictional Heating during Braking of the C/C Composite Disc". Materials 13, n. 12 (12 giugno 2020): 2691. http://dx.doi.org/10.3390/ma13122691.
Tesi sul tema "Composite materials C":
Goettler, Christoph Michael. "EFFECT OF DENSITY ON FRICTION AND WEAR PERFORMANCE OF CARBON-CARBON COMPOSITE MATERIALS". OpenSIUC, 2020. https://opensiuc.lib.siu.edu/theses/2780.
Ozcan, Soydan. "Microstructure-property-performance relationships of c-fiber-reinforced carbon composite friction materials /". Available to subscribers only, 2008. http://proquest.umi.com/pqdweb?did=1686179081&sid=4&Fmt=2&clientId=1509&RQT=309&VName=PQD.
"Department of Engineering Science." Keywords: Carbon composite, Friction materials, Carbon-fiber reinforcement Includes bibliographical references (p. 106-115). Also available online.
Kouri, Jeffrey Victor. "Improved finite element analysis of thick laminated composite plates by the predictor corrector technique and approximation of C[superscript]1 continuity with a new least squares element". Diss., Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/20762.
Tariq, Amna. "Design and implementation of a plasma enhanced chemical vapour deposition (PECVD) system for the study of C₆₀-polymer composite thin films and surface fuctionalization effects on C₆₀". Thesis, McGill University, 2004. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=81572.
Mtawa, Alexander Nikwanduka. "Influence of geometry and material properties on the optimum performance of the C-shape piezo-composite actuator". Thesis, Cape Peninsula University of Technology, 2008. http://hdl.handle.net/20.500.11838/1301.
In recent years, due to rapid advances in technology there has been an increasingly high demand for large displacement and large force, precise positioning, fast response, low power consuming miniature piezoelectric actuators. In certain smart structure applications, the use of curved piezoelectric actuators is necessary. The present work extends the earlier investigations on the C- shape actuator by providing a detailed investigation on the influence of geometric and material properties of the individual layers of the C-shape piezocomposite for its optimal performance as an actuator. Analytical models have. been used to optimize the geometry of the actuator. Experimental and finite element analyses (using general purpose finite element software i.e. CoventerWare and MSC. Marc) have been used for validation. The present work has established that, by maintaining the thickness of the substrate and piezoceramic layers constant; changing the external radius, for example increasing it, the stiffness of the structure decreases and thus yielding large displacement This has a negative effect on the force produced by the actuator. With fixed thickness of the substrate and varying the thickness of the piezoceramic (for fixed external radius) the result is as follows: Increasing the thickness of the piezoceramic layer has the effect of decreasing the displacement while the force increases. With fixed PZT thickness as well as the external radius, varying the substrate thickness has the following effect: As the thickness of the substrate increases the displacement increases reaching a maximum. Subsequent increase in the thickness of the substrate the displacement is reduced. The force continues increasing at least for the ratios up to 1.0, further increase of the substrate, subsequent decrease of force is also noted. In addition to changing the thickness of the substrate, the choice of different material for the substrate has the following effect: For substrate/PZT ratios of up to 0.6. an actuator with substrate material having higher elastic modulus will produce larger displacement while for ratios beyond this ratio the situation is reversed. The causes for this kind of behaviour have been addressed. In all cases both force and displacement are found to be directly proportional to applied voltage.
Chelaghma, Saber Ayoub. "Fonctionnalisation de composites C/PEKK pour application aérospatiale : caractérisation, modélisation et influence sur les propriétés du composite". Thesis, Toulouse 3, 2018. http://www.theses.fr/2018TOU30362.
Reducing aircraft weight is one of the major challenges facing the aerospace industry. In order to achieve the ambitious goals of fuel consumption and emission reduction, carbon-fiber reinforced composites have been introduced to the market. These materials are attracting increasing interest, however, they have low electrical conductivity to ensure protection against lightning strike. For this reason, composites filled with conductive particles are the subject of ongoing research activities. The objective is the development of multifunctional composites with enhanced electrical properties. Actually, the most used thermoplastic matrix is PEEK, but this polymer remains expensive, and its processing temperature is high. For this purpose, thermoplastic matrices, such as PEKK, are again studied. Between the raw material and the final part, the thermoplastic matrix undergoes several thermal steps with high temperature exposure (impregnation, consolidation, forming and assembly processes) during which its ability to crystallize evolves continuously. In order to evaluate the impact of the process and the composite constituents on its properties, crystallization has been the subject of particular attention. Two complementary experimental devices were used to characterize the crystallization. The heating stage, allows to apply a thermal cycle and observe the crystallization in optical microscopy and differential scanning calorimetry. The influence of carbon fibers and conductive fillers on the crystallization kinetics was evaluated. A decrease in crystallization times was observed through the increase of the nucleation rate. The collected data were used to develop a kinetic model identified through an original approach based on microscopic data. This model makes it possible to predict the crystallization kinetics of PEKK composites. Nevertheless, it does not make it possible to predict the final microstructure. However, the microstructure has a significant impact on mechanical properties as it has been proven through nano-indentation tests. To predict the final microstructure, a model based on the pixel coloring approach has been developed. The influence of carbon fibers has been introduced through the formation of a transcrystalline phase. A good correlation is found between the analytical approach, the simulation and the experimental data in terms of crystallization kinetics. Mechanical and electrical characterizations were performed to evaluate the performance of these new materials. On the studied materials, the mechanical response is not homogeneous as observed on tensile tests followed in stereo-correlation. The study of matter health shows the existence of defects, in particular, at the microstructure level. In order to take this particularity into account, it is thus necessary to describe the microstructure more finely. For this, X-ray tomography was used to characterize the composite. Recent developments in this technique allow, in combination with segmentation tools, to reconstruct a representative geometry of the material. This geometry is used to simulate the mechanical behaviour as well as the crystallization. The numerical simulations of an RVE are able to calculate the properties of a ply, then those of a laminate. This multi-scale modelling could reduce the number and cost of experimental campaigns. Thus, determining the properties of the final structure based on characterizations and simulation at the microstructure scale is a strategic scientific and industrial issue. This work is a contribution towards this approach
Zhang, Hai. "Comparative study of infrared thermography, ultrasonic C-scan, X-ray computed tomography and terahertz imaging on composite materials". Doctoral thesis, Université Laval, 2017. http://hdl.handle.net/20.500.11794/36573.
Non-destructive testing (NDT) of composite materials is complicated due to the wide range off laws encountered (including delamination, micro-cracking, fiber fracture, fiber pullout, matrix cracking, inclusions, voids, and impact damage). The ability to quantitatively characterize the type, geometry, and orientation of flaws is essential. Infrared thermography (IRT), as an image diagnostic technique, can satisfy the increasing industrial need for NDT&E. In the thesis, optical and mechanical excitation thermography were used to investigate different composite materials, including 1) carbon fiber dry preforms, 2) natural fiber composites, 3) basalt-carbon fiber hybrid composites subjected to impact loading (sandwich-like and intercalated stacking sequence), 4) micro-sized flaws in a stitched T-joint 3D carbon fiber reinforced polymer composite (CFRP), and 5) paintings on canvas which can be considered as composite materials. Of particular interest, a new IRT technique micro-laser line thermography (micro-LLT) was proposed for the evaluation of submillimeter porosities in CFRP. Micro-laser spot thermography (micro-LST) and micro-vibrothermography (micro-VT) were also presented with the usage of a micro-lens. Pulsed thermography (PT) and lock-in thermography (LT) were compared with x-ray computed tomography (CT) for validation. Ultrasonic C-scan (UT) and continuous wave terahertz imaging (CW THz) were also conducted for the comparative purpose. The inspection by thermographic techniques is an open matter to be discussed for the scientific audience. In fact, pulse phase thermography (PPT) based on phase transform was used to estimate the damage depth. Basic thermographic signal reconstruction (B-TSR), principal component thermography (PCT) and partial least squares thermography (PLST) (another more recent advanced image processing technique) were also used to pro-cess the thermographic data. Finally, a comprehensive and comparative analysis based on thermographic image diagnostics was conducted in view of potential industrial applications.
Voirin, Thibaut. "Etude du comportement mécanique et de l’endommagement des composites C/C à basses et hautes températures". Thesis, Lyon, 2021. http://www.theses.fr/2021LYSEI008.
Carbon/Carbon composites are used in aeronautics and space industries for their excellent thermomechanical properties, from room temperature to very high temperatures (up to 3000°C). Nevertheless, these properties and their evolution at elevated temperatures are not known well enough, specifically for braking-like solicitations such as plane braking or motorsport braking.The main objectives of this work was to study the mechanical behavior of this composite under mechanical solicitations that may occur during a braking situation. Thereby, compressive and shear behavior were studied in particular, in order to determine the evolution of the damage mechanisms depending on the temperature for these loading modes. In order to lead this study successfully, various experimental aspects have been approached, such as sample geometry, as well as measurements issues due to the mechanical testing at high temperatures. This is how original mechanical testing of the interlaminar shear behavior have been performed. Concurrently with these tests, the material microstructure has been studied in-situ and post-mortem with a multi-scale approach (at ply level, at yarn level and at fiber level inside the strands). The evolution of the mechanical properties has been linked to the microstructure evolution for the different loading modes (Z-compression, XY-compression and interlaminar shear) in order to propose damage scenario of the material as a function of the temperature. This approach allowed us to understand the major role of the thermal differential dilatations of the yarn on the shrinking of the needles for temperatures up to 1500°C. For temperatures higher than 1500°C, plasticity effects have been identified
Margueritat-Regenet, Caroline. "Elaboration et caractérisation de fils composites C/Al : infiltration spontanée et continue par activation chimique du mouillage". Phd thesis, École Nationale Supérieure des Mines de Paris, 2002. http://tel.archives-ouvertes.fr/tel-00005642.
La mèche de fibre (Torayca T700S-12K) étant commercialisée avec 1% en masse densimage, une première étape a consisté en l'élimination de cette couche d'époxy par dégradation thermique sous air. D'une part, il a été construit un diagramme pour le choix des paramètres de désensimage (température du four, vitesse de défilement) minimisant la perte des propriétés mécaniques des fibres. D'autre part, la cinétique du phénomène de désensimage a été établie afin de prévoir le désensimage " dynamique " sur le pilote en connaissant le profil thermique de la mèche pour les conditions opératoires données.
La mèche est ensuite trempée dans une solution aqueuse saturée d'un sel fluoré à 95°C puis séchée sous air, dans la seconde étape, dite de traitement au flux pour laquelle les paramètres opératoires sont la vitesse de défilement et la composition du flux. Il s'est agi ici d'étudier, plus particulièrement, le vieillissement de la solution aqueuse et la qualité du dépôt de cristaux sur la mèche (morphologie, répartition et quantité). D'une manière générale, le coeur de la mèche est beaucoup moins bien traité que sa surface. Laction de plusieurs composés fluorés sur le mouillage des fibres par l'aluminium a été regardé. Un schéma réactionnel s'appuyant essentiellement sur une étude ATD a mis en évidence le rôle favorable de l'oxydation par l'air de l'aluminium natif pour l'imprégnation du coeur du composite. Comparée à la toute première réaction flux/alumine, cest principalement la réaction flux/aluminium liquide qui engendre lélévation suffisante de température permettant dinitier l'infiltration.
Enfin, la mèche passe par un bain d'aluminium liquide (99,7% en masse) à 710°C sous air : c'est l'étape d'infiltration dont les paramètres sont la température du bain et la vitesse de défilement. Dans cette dernière étape, le but était de définir la microstructure et les propriétés du fil composite élaboré selon les conditions optimales. Des observations fines au MET indiquent la présence de précipités Al3Zr et Al4C3 à linterface fibre/matrice. Cette adhésion chimique contribue à limiter la tenue mécanique du fil tout comme la distribution inhomogène des fibres, la présence de porosités naturelles et de cryolithe solidifiée. Le meilleur fil composite a été obtenu pour une vitesse lente (1m/min) et une température moyenne du bain (710°C)°. Sa résistance à la traction ne dépasse pas 520Mpa pour une fraction volumique de fibres de 40%, ce qui suggère de minimiser les dégradations diverses subies par le renfort dans les trois étapes et les défauts liés à l'infiltration réactive.
Thaury, Claire. "Optimisation de matériaux composites Si/Intermétallique/Al/C utilisés comme électrode négative dans des accumulateurs Li-ion". Thesis, Paris Est, 2015. http://www.theses.fr/2015PEST1068/document.
This study focuses on the optimization of innovative composite materials Si/Intermetallic/Al/C used as negative electrode in lithium-ion batteries. The aim of this work is optimization of the composition for the material (20Ni-48Sn-20Si-3Al-9C) to improve its electrochemical performances. All materials are made up of silicon nanoparticles embedded in a sub micrometrical matrix. Several issues have been studied in this essay: optimization of the silicon and carbon contents, influence of the silicon surface composition, and substitution of the former intermetallic Ni3+xSn4 by other ones: zinc aluminium compound Al0,23Zn0,77 and two intermetallics Cu6Sn5 et CoSn. Metallic compounds and composites have been synthesised by powder metallurgy and mechanical alloying, respectively. Their chemical and structural properties have been determined by electron probe microanalysis, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Electrochemical characterisations have been carried out by galvanostatic cycling and cyclic voltammetry in coin and Swagelok half cells. This report details the influence of the studied parameters on the structural properties of the composite materials. A large study was devoted to the influence of carbon and silicon contents on the achievement of a homogeneous matrix, which is mandatory to get good electrochemical performances. Influence of the composition of silicon surface and intermetallic on the microstructure and electrochemical properties of the composites was also studied. Thus, we have shown that intermetallics reacting moderately with Si during mechanical alloying have better electrochemical properties. The best electrochemical properties have been obtained for the nominal composition Ni0.13Sn0.15Si0.26Al0.04C0.42. This material provides a reversible capacity of 650 mAh.g-1 during 1000 cycles. The use of carbon coated silicon improves the stability of the SEI during cycling even if this composite still has to be optimized
Libri sul tema "Composite materials C":
United States. National Aeronautics and Space Administration., a cura di. A thermally modified matrix composite material with structural integrity to 371 C. [Washington, D.C.]: National Aeronautics and Space Administration, 1988.
Minnetyan, Levon. The C(T) specimen in laminated composites testing. Cleveland, Ohio: Lewis Research Center, 1996.
Sliney, Harold E. PM200, PS200: Self-lubricating bearing and seal materials for applications to 900 C. Cleveland, Ohio: Materials Division, NASA Lewis Research Center, 1991.
Sliney, Harold E. PM200, PS200: Self-lubricating bearing and seal materials for applications to 900 C. Cleveland, Ohio: Materials Division, NASA Lewis Research Center, 1991.
Sliney, Harold E. PM200, PS200: Self-lubricating bearing and seal materials for applications to 900 C□. Cleveland, Ohio: Materials Division, NASA Lewis Research Center, 1991.
Stephens, Joseph R. Intermetallic and ceramic matrix composites for 815 to 1370 C (1500 to 2500 F) gas turbine engine applications. [Washington, DC]: National Aeronautics and Space Administration, 1989.
F, Lung S., Gupta K. K e United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., a cura di. A three-node C ̊element for analysis of laminated composite sandwich shells. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1989.
F, Lung S., Gupta K. K e United States. National Aeronautics and Space Administration. Scientific and Technical Information Division., a cura di. A three-node C ̊element for analysis of laminated composite sandwich shells. [Washington, DC]: National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Division, 1989.
DellaCorte, Christopher. Experimentally determined wear behavior of an Al2O3-SiC composite from 25 to 1200 ̊C. [Washington, D.C.]: NASA, 1990.
DellaCorte, Christopher. Experimentally determined wear behavior of an Al2O3-SiC composite from 25 to 1200 ̊C. [Washington, D.C.]: NASA, 1990.
Capitoli di libri sul tema "Composite materials C":
Li, Jian Zhang, Jun Zhang, Li Tong Zhang, Lai Fei Cheng e Yong Dong Xu. "Oxidation Behavior of Carbon Phase in 3D C/SiC Composites". In Composite Materials V, 43–47. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-451-0.43.
Hou, Jun Tao, Sheng Ru Qiao, Guo Feng Lu, Cheng Yu Zhang e Yue Bing Zhang. "Internal Friction of a 2D-C/SiC Composite from 25°C to 400°C". In Key Engineering Materials, 1509–12. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.1509.
Ji, Yong Bing, Tie Hu Li, Qi Lang Lin, Chan Ging Fang e Xiao Xian Wang. "Preparation of Mesophase Pitch from Coal Tar Pitch for C/C Composites". In Advances in Composite Materials and Structures, 165–68. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.165.
Lin, Hao Tung, Jow Lay Huang e Sheng Chang Wang. "Investigation of Hot-Pressed Al2O3-Cr2O3/ Cr3C2 Nanocomposite". In Composite Materials V, 93–97. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-451-0.93.
Favre, A., T. Birkel e H. Fuzellier. "Reaction between Liquid Al (or Si) and Composite C/C Materials". In High Temperature Ceramic Matrix Composites, 334–40. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527605622.ch53.
Zhao, Si Xin, Wei Wang e Da Li Mao. "Bainite Transformation in Fe-0.34%C-Nb Steels". In Advances in Composite Materials and Structures, 117–20. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.117.
Herlin, N., O. Croix, M. Cauchetier, M. Luce e E. Musset. "Nanometric Si/C/N Composite Powders Formed by Aerosol — Laser Interaction". In Nanophase Materials, 117–20. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-011-1076-1_16.
Zhu, Yun Zhou, Ming Yuan, Zheng Ren Huang, Shao Ming Dong e Dong Liang Jiang. "Effect of PCS Pyrolysis Process on C Fiber in Cf/SiC Composite". In Key Engineering Materials, 1284–86. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-410-3.1284.
Tsuji, Nobumasa, Taiju Shibata, Junya Sumita, Masahiro Ishihara e Tatsuo Iyoku. "Study on Structural Integrity of C/C Composite Using as Core Restraint Mechanism in HTGR". In Key Engineering Materials, 2720–26. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-978-4.2720.
Tabrej, K., M. T. H. Sultan, M. Jawaid, A. U. M. Shah e S. Sani. "Low Velocity Impact, Ultrasonic C-Scan and Compression After Impact of Kenaf/Jute Hybrid Composites". In Impact Studies of Composite Materials, 73–85. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1323-4_6.
Atti di convegni sul tema "Composite materials C":
MADENCI, ERDOGAN, ATILA BARUT, AMIN YAGHOOBI, ZHIYANG YAO e YILE HU. "PERIDYNAMICS FOR MICROSTRUCTURAL DAMAGE MODELING OF 3D CARBON/CARBON (C/C) COMPOSITE MATERIALS". In Proceedings for the American Society for Composites-Thirty Eighth Technical Conference. Destech Publications, Inc., 2023. http://dx.doi.org/10.12783/asc38/36652.
Dillingham, R., B. Campbell e E. Kidd. "How Advanced Composite Materials Respond to Surface Treatment". In CAMX 2019. NA SAMPE, 2019. http://dx.doi.org/10.33599/nasampe/c.19.0727.
Nur’aini, Farida Dewi, Sri Rahayu e Muhaimin Rifa’i. "NFКB activity decreased in BALB/c mice with high fat diet and fructose". In 2ND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS AND MATERIAL ENGINEERING (ICCMME 2017). Author(s), 2017. http://dx.doi.org/10.1063/1.4983416.
Takegoshi, Masao, Fumiei Ono, Shuichi Ueda, Toshihito Saito e Osamu Hayasaka. "Evaluation of Metallic-tube-cooled C/C Composite Structure by Rocket Combustor". In 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2007. http://dx.doi.org/10.2514/6.2007-2357.
Kosaraju, Satyanarayana, Venu Gopal Anne e Swapnil Gosavi. "Development of Hybrid Composites (Al-SiC-C) Through Stir Casting: Machinability Studies". In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2659.
Chen, Zao, Harley H. Cudney, Victor Giurgiutiu, Craig A. Rogers, Robert Quattrone e Justin Berman. "Full-scale ferromagnetic active tagging testing of C-channel composite elements". In Smart Structures and Materials '97, a cura di Norris Stubbs. SPIE, 1997. http://dx.doi.org/10.1117/12.274640.
BECKERMAN, L., T. GREENE e T. CHRISTIAN, JR. "Thermoplastic composite C-130 belly skins - Design, manufacturing, and test". In 28th Structures, Structural Dynamics and Materials Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1987. http://dx.doi.org/10.2514/6.1987-798.
Mach, R., H. D. Klotz, C. Dreher, C. Olschewski e H. Drost. "Si-C-N COMPOSITE POWDERS, THERMAL PLASMA SYNTHESIS AND CHARACTERIZATION". In Progress in Plasma Processing of Materials, 1997. Connecticut: Begellhouse, 2023. http://dx.doi.org/10.1615/itppc-1996.940.
Nikravan, A., H. R. Baharvandi, F. B. Jebelli, H. Abdizadeh e N. Ehsani. "Microstructure and mechanical properties of pressureless sintered B 4 C-C composite using phenolic resin". In International Conference on Smart Materials and Nanotechnology in Engineering. SPIE, 2007. http://dx.doi.org/10.1117/12.780337.
Inada, Yusuke, Makiko Kobayashi, Hajime Nagata e Tadashi Takenaka. "Sol-gel composite materials for continuous monitoring at 600°C". In 2015 IEEE International Ultrasonics Symposium (IUS). IEEE, 2015. http://dx.doi.org/10.1109/ultsym.2015.0212.
Rapporti di organizzazioni sul tema "Composite materials C":
Bryant, C. A., S. A. Wilks e C. W. Keevil. Survival of SARS-CoV-2 on the surfaces of food and food packaging materials. Food Standards Agency, novembre 2022. http://dx.doi.org/10.46756/sci.fsa.kww583.
Hahn, Gail L. Accelerated Insertion of Materials - Composites (AIM-C) Methodology. Fort Belvoir, VA: Defense Technical Information Center, maggio 2004. http://dx.doi.org/10.21236/ada511880.
Litaor, Iggy, James Ippolito, Iris Zohar e Michael Massey. Phosphorus capture recycling and utilization for sustainable agriculture using Al/organic composite water treatment residuals. United States Department of Agriculture, gennaio 2015. http://dx.doi.org/10.32747/2015.7600037.bard.
Orient, George, e Gail L. Hahn. Accelerated Insertion of Materials - Composites (AIM-C). Software Component Delivery Requirements. Fort Belvoir, VA: Defense Technical Information Center, maggio 2004. http://dx.doi.org/10.21236/ada511881.
Lease e Jones. PR-266-12213-R01 Minimizing Gas Compressor Lubricating Oil Consumption. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), marzo 2013. http://dx.doi.org/10.55274/r0010085.
Palhares Neto, Luiz, Leilane Gomes, José Marangon, Genilton Santos e Cecílio Caldeira Júnior. Protocolo de micropropagação de Cattleya milleri, espécie endêmica do quadrilátero ferrífero criticamente ameaçada de extinção. ITV, maggio 2022. http://dx.doi.org/10.29223/prod.tec.itv.ds.2022.12.palharesneto.