Articoli di riviste sul tema "Clay-Based mixtures"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Clay-Based mixtures".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Lu, Zhen, Aimin Sha e Wentong Wang. "Permeability Evaluation of Clay-quartz Mixtures Based on Low-Field NMR and Fractal Analysis". Applied Sciences 10, n. 5 (27 febbraio 2020): 1585. http://dx.doi.org/10.3390/app10051585.
Testo completoGao, Xiaojing, Qiusheng Wang e Guowei Ma. "Experimental Investigation on the Erosion Threshold and Rate of Gravel and Silty Clay Mixtures". Transactions of the ASABE 62, n. 4 (2019): 867–75. http://dx.doi.org/10.13031/trans.13290.
Testo completoDafalla, Muawia. "Predicting Swell in Clay-Sand Mixtures Used in Liners". Applied Sciences 13, n. 20 (11 ottobre 2023): 11161. http://dx.doi.org/10.3390/app132011161.
Testo completoPanchenko, Alexander I., Vitaliy N. Solov’ev, Nikita A. Tretyakov, Alexander D. Chernov e Ilmir R. Shaykhalov. "Evaluation of thixotropy of clay-gypsum based plaster". Stroitel stvo nauka i obrazovanie [Construction Science and Education], n. 4 (31 dicembre 2019): 6. http://dx.doi.org/10.22227/2305-5502.2019.4.6.
Testo completoAlqenaee, Amnah Y., Ali M. Memari e Maryam Hojati. "TRANSITION FROM TRADITIONAL COB CONSTRUCTION TO 3D PRINTING OF CLAY HOMES". Journal of Green Building 16, n. 4 (1 settembre 2021): 3–28. http://dx.doi.org/10.3992/jgb.16.4.3.
Testo completoLiutyi, R., M. Fyodorov, M. Fesenko e D. Liuta. "REGULATION OF THE PROPERTIES OF SAND-CLAY MOLDING MIXTURES BY SODIUM PHOSPHATE ADDITIONS". New Materials and Technologies in Metallurgy and Mechanical Engineering, n. 2 (20 giugno 2023): 38–45. http://dx.doi.org/10.15588/1607-6885-2023-2-6.
Testo completoNi, Jing, Gang-Lai Hao, Jia-Qi Chen, Lei Ma e Xue-Yu Geng. "The Optimisation Analysis of Sand-Clay Mixtures Stabilised with Xanthan Gum Biopolymers". Sustainability 13, n. 7 (26 marzo 2021): 3732. http://dx.doi.org/10.3390/su13073732.
Testo completoAsamatdinov, Marat, Ekaterina Shokodko, Andrey Ushakov, Igor Bessonov, Sergey Kozlov e Artem Zhukov. "Composition and rheological characteristics of plaster mixtures". E3S Web of Conferences 97 (2019): 02006. http://dx.doi.org/10.1051/e3sconf/20199702006.
Testo completoBensalem, Sara, Mohamed Lyes Kamel KHOUADJIA, Kamel Abdou, Ahmed Abderraouf Belkadi e Oussama Kessal. "Experimental Evaluation of Workability Compressive Strength and Freeze-Thaw Durability of Concrete Containing Expanded Clay Aggregates". Aceh International Journal of Science and Technology 11, n. 2 (5 settembre 2022): 145–54. http://dx.doi.org/10.13170/aijst.11.2.25028.
Testo completoAsamatdinov, Marat, Аlexey Zhukov, Andrey Medvedev e Vitaly Mukhametzyanov. "Fire protection systems using clay-gypsum plaster in agriculture". E3S Web of Conferences 175 (2020): 11008. http://dx.doi.org/10.1051/e3sconf/202017511008.
Testo completoIbragimov, Marat A., Nelli N. Shishkina e Elena G. Zinovjeva. "Reinforcement of Elastomers Based on Butadiene Rubbers and their Mixtures with Layered Silicates". Key Engineering Materials 869 (ottobre 2020): 158–62. http://dx.doi.org/10.4028/www.scientific.net/kem.869.158.
Testo completoKhadzhishalapov, G. N., T. A. Khezhev, A. M. Gadzhiev, R. G. Radjabov e U. I. Isaeva. "Investigation of the effect of electric heating of expanded clay concrete mixture on the structure and properties of lightweight expanded clay concrete exposed to high temperatures". Herald of Dagestan State Technical University. Technical Sciences 48, n. 4 (12 febbraio 2022): 187–96. http://dx.doi.org/10.21822/2073-6185-2021-48-4-187-196.
Testo completoKorolev, V. A., E. N. Samarin, V. A. Panfilov e I. V. Romanova. "Sorption Properties of Brucite and Brucite-Based Clay Mixtures". Ecology and Industry of Russia 20, n. 1 (16 gennaio 2016): 18–24. http://dx.doi.org/10.18412/1816-0395-2016-1-18-24.
Testo completoAkbarimehr, Davood, Alireza Rahai, Abolfazl Eslami e Moses Karakouzian. "Deformation Characteristics of Rubber Waste Powder–Clay Mixtures". Sustainability 15, n. 16 (15 agosto 2023): 12384. http://dx.doi.org/10.3390/su151612384.
Testo completoMollins, L. H., D. I. Stewart e T. W. Cousens. "Predicting the properties of bentonite-sand mixtures". Clay Minerals 31, n. 2 (giugno 1996): 243–52. http://dx.doi.org/10.1180/claymin.1996.031.2.10.
Testo completoDalmacija, Milena, Bozo Dalmacija, Dejan Krcmar, Miljana Prica, Ljiljana Rajic, Srdjan Roncevic e Olivera Gavrilovic. "Solidification/stabilization of metal polluted sediment of Krivaja river". Chemical Industry 66, n. 4 (2012): 469–78. http://dx.doi.org/10.2298/hemind111031110d.
Testo completoAsamatdinov, M. O., I. I. Popov, S. P. Chernukhin e Alexey D. Zhukov. "Modified Gypsum Binder for Plastering Systems". Key Engineering Materials 887 (maggio 2021): 428–33. http://dx.doi.org/10.4028/www.scientific.net/kem.887.428.
Testo completoAl Allam, Allam Musbah, Ahmed Suliman B. Ali, Hassan M. Hassan Ali e Isa Ali Almuhktar. "Effect of Soft Clay on the Volumetric and Mechanical Properties of Hot Mix Asphalt". مجلة الجامعة الأسمرية: العلوم التطبيقية 6, n. 5 (31 dicembre 2021): 186–202. http://dx.doi.org/10.59743/aujas.v6i5.1085.
Testo completoErmilova, Elizaveta, e Zagira Kamalova. "The influence of calcined mixture cooling method on hydration products composition of blended cement stone". E3S Web of Conferences 274 (2021): 04011. http://dx.doi.org/10.1051/e3sconf/202127404011.
Testo completoAlves, Hugo P. A., Jaquelígia B. Silva, Liszandra F. A. Campos, Sandro M. Torres, Ricardo P. S. Dutra e Daniel A. Macedo. "Preparation of mullite based ceramics from clay–kaolin waste mixtures". Ceramics International 42, n. 16 (dicembre 2016): 19086–90. http://dx.doi.org/10.1016/j.ceramint.2016.09.068.
Testo completoMatteson, A., J. P. Tomanic, M. M. Herron, D. F. Allen e W. E. Kenyon. "NMR Relaxation of Clay/Brine Mixtures". SPE Reservoir Evaluation & Engineering 3, n. 05 (1 ottobre 2000): 408–13. http://dx.doi.org/10.2118/66185-pa.
Testo completoHamidifar, Hossein, e Mohammad Hossein Omid. "Local scour of cohesive beds downstream of a rigid apron". Canadian Journal of Civil Engineering 44, n. 11 (novembre 2017): 935–44. http://dx.doi.org/10.1139/cjce-2016-0398.
Testo completoKidalov, Nikolay A., Anna S. Adamova e Viktoria V. Smirnova. "Effect of Temperature Calcinations of Clay on Strength of Moulding Mixture". Materials Science Forum 973 (novembre 2019): 26–29. http://dx.doi.org/10.4028/www.scientific.net/msf.973.26.
Testo completoDucasse, Etienne, Karine Adeline, Xavier Briottet, Audrey Hohmann, Anne Bourguignon e Gilles Grandjean. "Montmorillonite Estimation in Clay–Quartz–Calcite Samples from Laboratory SWIR Imaging Spectroscopy: A Comparative Study of Spectral Preprocessings and Unmixing Methods". Remote Sensing 12, n. 11 (27 maggio 2020): 1723. http://dx.doi.org/10.3390/rs12111723.
Testo completoBrown, Philip J., Lambert B. McCarty, Virgil L. Quisenberry, L. Ray Hubbard e M. Brad Addy. "Influence of Increasing Fines on Soil Physical Properties of U.S. Golf Association Sand". HortScience 54, n. 11 (novembre 2019): 2063–66. http://dx.doi.org/10.21273/hortsci14110-19.
Testo completoJoo, Incheol, e Jongmuk Won. "Influence of Sand Grain Size and Clay Mineralogy on Suffusion of Sand-Clay Mixtures". Journal of the Korean Society of Hazard Mitigation 23, n. 2 (30 aprile 2023): 91–99. http://dx.doi.org/10.9798/kosham.2023.23.2.91.
Testo completoMousavi, Seyed Sina, Chandrasekhar Bhojaraju e Claudiane Ouellet-Plamondon. "Clay as a Sustainable Binder for Concrete—A Review". Construction Materials 1, n. 3 (29 settembre 2021): 134–68. http://dx.doi.org/10.3390/constrmater1030010.
Testo completoKonrad, Jean-Marie, e Martin Samson. "Hydraulic conductivity of kaolinite-silt mixtures subjected to closed-system freezing and thaw consolidation". Canadian Geotechnical Journal 37, n. 4 (1 agosto 2000): 857–69. http://dx.doi.org/10.1139/t00-003.
Testo completoKhedidja, Belaidi, Zedjaoui Abdeljalil, Mekerta Belkacem, Bassoud Abdelkader e Allal Mohamed-Amine. "Evaluation of the Permeability of Clay-Lime Mixtures for Hazardous Waste Insulation Barriers, Case of Southern Algeria (Adrar)". Trends in Sciences 21, n. 7 (10 maggio 2024): 7725. http://dx.doi.org/10.48048/tis.2024.7725.
Testo completoLaaroussi, N., G. Lauriat, M. Garoum, A. Cherki e Y. Jannot. "Measurement of thermal properties of brick materials based on clay mixtures". Construction and Building Materials 70 (novembre 2014): 351–61. http://dx.doi.org/10.1016/j.conbuildmat.2014.07.104.
Testo completoFirstov, A. P., e O. I. Shevchenko. "Core mixture based on modified lignosulfonate." Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 79, n. 5 (26 giugno 2023): 401–5. http://dx.doi.org/10.32339/0135-5910-2023-5-401-405.
Testo completoZhang, Jun Rui, Meng Dan Xu, Georgios E. Christidis e Chun Hui Zhou. "Clay minerals in drilling fluids: functions and challenges". Clay Minerals 55, n. 1 (marzo 2020): 1–11. http://dx.doi.org/10.1180/clm.2020.10.
Testo completoKohno, Masanori, Yoshitaka Nara, Masaji Kato e Tsuyoshi Nishimura. "Effects of clay-mineral type and content on the hydraulic conductivity of bentonite–sand mixtures made of Kunigel bentonite from Japan". Clay Minerals 53, n. 4 (dicembre 2018): 721–32. http://dx.doi.org/10.1180/clm.2018.52.
Testo completoYin, Kexin, Anne-Laure Fauchille, Khaoula Othmani, Giulio Sciarra, Panagiotis Kotronis, Yannick Benoit, Francois Bertrand e Samuel Branchu. "Influence of sample preparation on the multi scale structure of sand-clay mixtures". E3S Web of Conferences 92 (2019): 01007. http://dx.doi.org/10.1051/e3sconf/20199201007.
Testo completoChen, Chenghao, Shengshui Chen, Shiang Mei, Shaoyang Han, Xian Zhang e Yi Tang. "An Improved Large-Scale Stress-Controlled Apparatus for Long-Term Seepage Study of Coarse-Grained Cohesive Soils". Sensors 21, n. 18 (18 settembre 2021): 6280. http://dx.doi.org/10.3390/s21186280.
Testo completoGhorbani, Ali, e Meysam Salimzadehshooiili. "Evaluation of Strength behaviour of Cement-RHA Stabilized and Polypropylene Fiber Reinforced Clay-Sand Mixtures". Civil Engineering Journal 4, n. 11 (30 novembre 2018): 2628. http://dx.doi.org/10.28991/cej-03091187.
Testo completoPETROV, A. M., e S. Y. SHEPTUN. "THE EFFECT OF MAN-MADE MICROFILLERS ON THE STRENGTH OF ADHESION TO THE BASE OF THE SOLUTION OF THE DRY CONSTRUCTION MIXTURE". Bridges and tunnels: Theory, Research, Practice, n. 24 (1 dicembre 2023): 66–71. http://dx.doi.org/10.15802/bttrp2023/291864.
Testo completoV.M. Kurduymova, M.U. Uranova e M.A. Baituganova. "WALL PRODUCTS ON THE BASIS OF STRAW AND ALKALINE BINDERS". Herald of KSUCTA n a N Isanov, n. 2 (24 giugno 2019): 303–6. http://dx.doi.org/10.35803/1694-5298.2019.2.303-306.
Testo completoWidomski, Marcin K., Anna Musz-Pomorska e Wojciech Franus. "Hydraulic and Swell–Shrink Characteristics of Clay and Recycled Zeolite Mixtures for Liner Construction in Sustainable Waste Landfill". Sustainability 13, n. 13 (29 giugno 2021): 7301. http://dx.doi.org/10.3390/su13137301.
Testo completoLa Noce, Michele, Alessandro Lo Faro e Gaetano Sciuto. "Clay-Based Products Sustainable Development: Some Applications". Sustainability 13, n. 3 (28 gennaio 2021): 1364. http://dx.doi.org/10.3390/su13031364.
Testo completoGökalp, Z. "Engineering characteristics of sand-clay mixtures used for clay cores of earth-fill dams". Clay Minerals 44, n. 3 (settembre 2009): 319–26. http://dx.doi.org/10.1180/claymin.2009.044.3.319.
Testo completoTarvornpanich, Tarnkamol, Guilherme P. Souza e William E. Lee. "Microstructural Evolution in Clay-Based Ceramics II: Ternary and Quaternary Mixtures of Clay, Flux, and Quartz Filler". Journal of the American Ceramic Society 91, n. 7 (luglio 2008): 2272–80. http://dx.doi.org/10.1111/j.1551-2916.2008.02394.x.
Testo completoOkay, Gonca, Phillipe Leroy, Ahmad Ghorbani, Phillipe Cosenza, Christian Camerlynck, Justo Cabrera, Nicolas Florsch e André Revil. "Spectral induced polarization of clay-sand mixtures: Experiments and modeling". GEOPHYSICS 79, n. 6 (1 novembre 2014): E353—E375. http://dx.doi.org/10.1190/geo2013-0347.1.
Testo completoNizhegorodov, A. I. "MIXING PROCESSES AND EQUIPMENT. CONSTRUCTION MIXTURES AND MIXTURES FOR MANUFACTURING CONSTRUCTION MATERIALS. LECTURE 9". Spravochnik. Inzhenernyi zhurnal, n. 296 (novembre 2021): 52–59. http://dx.doi.org/10.14489/hb.2021.11.pp.052-059.
Testo completoMesboua, N., K. Benyounes, S. Kennouche, Y. Ammar, A. Benmounah e H. Kemer. "Calcinated Bentonite as Supplementary Cementitious Materials in Cement-Based Mortar". Journal of Applied Engineering Sciences 11, n. 1 (1 maggio 2021): 23–32. http://dx.doi.org/10.2478/jaes-2021-0004.
Testo completoGalán Arboledas, Rosendo J., Aarón Merino García e Salvador Bueno. "Lighter Structural Clay Ceramics Manufactured with Marble Cutting Dust and Paperboard Based Packaging Waste". Key Engineering Materials 663 (settembre 2015): 105–14. http://dx.doi.org/10.4028/www.scientific.net/kem.663.105.
Testo completoBrito, B. M. A., P. M. Bastos, A. J. A. Gama, J. M. Cartaxo, G. A. Neves e H. C. Ferreira. "Effect of carboxymethylcellulose on the rheological and filtration properties of bentonite clay samples determined by experimental planning and statistical analysis". Cerâmica 64, n. 370 (giugno 2018): 254–65. http://dx.doi.org/10.1590/0366-69132018643702332.
Testo completoTarvornpanich, Tarnkamol, Guilherme P. Souza e William E. Lee. "Microstructural Evolution in Clay-Based Ceramics I: Single Components and Binary Mixtures of Clay, Flux, and Quartz Filler". Journal of the American Ceramic Society 91, n. 7 (luglio 2008): 2264–71. http://dx.doi.org/10.1111/j.1551-2916.2008.02393.x.
Testo completoAbuzeid, M. A., M. T. Bassuoni e M. R. Sakr. "Effect of Polymer/Nano-Clay Coatings on the Performance of Concrete with High-Content Supplementary Cementitious Materials under Harsh Exposures". Materials 17, n. 5 (23 febbraio 2024): 1030. http://dx.doi.org/10.3390/ma17051030.
Testo completoHúlan, Tomáš, Igor Štubňa, Ján Ondruška e Anton Trník. "The Influence of Fly Ash on Mechanical Properties of Clay-Based Ceramics". Minerals 10, n. 10 (21 ottobre 2020): 930. http://dx.doi.org/10.3390/min10100930.
Testo completo