Letteratura scientifica selezionata sul tema "Bulmer"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Bulmer".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "Bulmer"
Kivisto, Peter. "Martin Bulmer, Sociological fox". Ethnic and Racial Studies 45, n. 8 (17 maggio 2022): 1397–400. http://dx.doi.org/10.1080/01419870.2022.2063694.
Testo completoMiles, Donald B. "Theoretical Evolutionary Ecology.Michael Bulmer". Quarterly Review of Biology 71, n. 3 (settembre 1996): 437–38. http://dx.doi.org/10.1086/419521.
Testo completoChristine, Helliwell. "Ralph Bulmer 1928–1988". Canberra Anthropology 11, n. 1 (gennaio 1988): 129–31. http://dx.doi.org/10.1080/03149098809508518.
Testo completoGOLSON, JACK. "Susan Bulmer, an archaeological pioneer". Archaeology in Oceania 51, S1 (ottobre 2016): 11–18. http://dx.doi.org/10.1002/arco.5117.
Testo completoJohnson, Megan, e Moynan King. "A Sonic Journey with Alex Bulmer". Canadian Theatre Review 184 (1 ottobre 2020): 62–66. http://dx.doi.org/10.3138/ctr.184.012.
Testo completoTallis, G. M. "Ancestral covariance and the Bulmer effect". Theoretical and Applied Genetics 73, n. 6 (aprile 1987): 815–20. http://dx.doi.org/10.1007/bf00289384.
Testo completoWood, Michael. "Dudley Bulmer’s Artefacts as Autobiography". Memoirs of the Queensland Museum - Culture 10 (dicembre 2016): 77–92. http://dx.doi.org/10.17082/j.2205-3239.10.2016-06.
Testo completoCallus, Ron. "The Making of the Australian Workplace Industrial Relations Survey". Journal of Industrial Relations 33, n. 4 (dicembre 1991): 450–67. http://dx.doi.org/10.1177/002218569103300403.
Testo completoGinzburg, Lev. "Evolutionary Theory Theoretical Evolutionary Ecology Michael Bulmer". BioScience 46, n. 1 (gennaio 1996): 61. http://dx.doi.org/10.2307/1312660.
Testo completoPopenoe, David. "Neighbours: The Work of Philip Abrams.Martin Bulmer". American Journal of Sociology 94, n. 2 (settembre 1988): 461–62. http://dx.doi.org/10.1086/229025.
Testo completoTesi sul tema "Bulmer"
Worgan, Sean. "Bulmer Hobson : an Ulster nationalist 1902-1908". Thesis, Keele University, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.602806.
Testo completoBentemessek-Kahia, Nesrine. "Bulles spéculatives et liquidité bancaire : le cas de la bulle des mers du sud". Paris 1, 2009. http://www.theses.fr/2009PA010052.
Testo completoBergström, Erika. "Buller i förskolans inomhusmiljö". Thesis, University of Gävle, Department of Mathematics, Natural and Computer Sciences, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-4644.
Testo completoSyftet med studien är att belysa buller i förskolans pedagogiska inomhusmiljö och vilken inverkan det kan ha på barnen som vistas där, samt vilka åtgärder som kan vidtas för att få en god ljudmiljö. Som metod har en enkätundersökning och intervjuer med pedagoger utförts. Dessutom har förskolans inomhusmiljö med barn och vuxna observerats. Undersökningen visar att barn, vuxna, aktiviteter och leksaker skapar en bullrig miljö. Som en följd av detta buller upplever pedagogerna att barnen bli trötta och okoncentrerade, men också livliga och högljudda. För att motverka buller har vissa åtgärder utförts i arbetssätt och miljö, men pedagogerna upplever att bristande kunskap, tid och pengar hindrar dem i vidare arbete.
Trots att det finns lagar och rekommendationer återstår det mycket att göra för att skapa en god ljudmiljö för barnens fortsatta utveckling och lärande.
Dahlström, Hannes, e Alexander Dyk-Strömberg. "Lätta väggar, högt buller". Thesis, Malmö universitet, Fakulteten för teknik och samhälle (TS), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-44434.
Testo completoThis thesis evaluates whether walls with light-frame construction are suitable to build in areas with high sound pressure levels, allowed by Sweden’s law regarding loud traffic noise nearbuildings. Previous consensus has been that exterior walls have sufficient sound insulation,regarding sound pressure levels by the residence-façade generated from traffic noise, to achieverequired indoor sound pressure levels. Due to the ongoing urbanization in Sweden, a law haspassed that increased the allowed levels of equivalent sound pressure by a residence-façade. Therefore, it has become relevant to examine if light-frame construction façades really do have sufficient sound insulation.In the study, field measurements are made on three façade walls to determine their noise reduction properties. The values from the measurements are compared to the sound insulation capacity of software-built wall-models with the same wall constructions as the field measured walls. Both the measured and the modelled walls sound insulation is also compared parallel to insulation values for light-frame construction walls found in literature. The values of the walls sound insultation are also evaluated regarding high but occurring sound pressure levels by facades and demanded levels of sound pressure indoors. Modifications are made to the construction of one modelled wall to quantify the improvement in sound insulation of the walls derived from the investigated construction-modifications.The results conclude that the examined light-frame construction walls are indeed sufficient in the aspect of sound insulation to merely satisfy the laws. The walls sound insulation is not as unambiguously sufficient when establishing what is considered a good indoor acoustic environment, instead of only achieving minimum levels required by law.
Sauvaget, Tabatha. "Formation des pseudo-bulbes dans les galaxies spirales locales de masse intermédiaire via des fusions majeures riches en gaz". Thesis, Paris Sciences et Lettres (ComUE), 2017. http://www.theses.fr/2017PSLEO012/document.
Testo completoBulges are present in almost 80% of nearby spiral galaxies of intermediate mass. Spiral galaxies represent about 70% of the intermediate-mass galaxies (typically with a mass between 2 × 10^10 and 10^11 solar masses) in the local Universe. While classical bulges have been associated to the result of major mergers, pseudo-bulges have been rather associated to secular evolution. However, the cosmological ΛCDM model predicts a hierarchical growth of galaxies via mergers while pseudo-bulges are found in > 50% of large nearby spiral galaxies. The aim of this thesis is to verify if we can build pseudo-bulges with gas-rich major mergers. The first part of this thesis is devoted to the presentation of the subject and the state of the art on the formation and evolution of galactic bulges.The second part of this thesis is focusing on the methodology developped to analyse bulges of spiral galaxies and understand their formation. The thesis has two axes of study, an observational part with the analysis of two complete samples of local spiral galaxies of intermediate mass to determine the proportion of pseudo-bulges in these samples and to have a reliable reference. Another part, which is the core of the study, is dedicated to the analysis of nume- rical simulations of gas-rich major mergers done with a N-body / SPH code (GADGET2). The aim is to reproduce this type of galaxy and to study their properties thanks to a bulge + disk decomposition.In the third part, I show that, within the limits given by the simulations, we can reproduce spiral galaxies with pseudo-bulges via gas-rich major mergers. This thesis propose a new scenario of pseudo-bulge formation thanks to the formation of a bar, which bring gas into the central parts. In addition, most of the observed structures, such as bars, rings or double-disks, are reproduced in the simulations. The different parameters of simulations has been then modified (gas fraction, mass ratio, mass of progenitors, feedback, gas extension, pericenter) to explore their impact on the results. We found that the disparities on Sersic index and B/T ratio comes as much from the difference between orbits as from between initial physical parameters chosen for simulations but we can still extract some trends. For instance, I show that the higher the gas fraction of the progenitors, the lower the Sersic index and the B/T ratio, the more the number of bars and their size increases
Tari, Wetterblad Alborz Viktor. "Lågfrekvent buller hos Vindkraftverk och Trafik". Thesis, KTH, MWL Marcus Wallenberg Laboratoriet, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-101942.
Testo completoMilosevic, Suncica. "Buller : Hur planeras en bullerfri stad?" Thesis, Uppsala universitet, Kulturgeografiska institutionen, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-243341.
Testo completoHolgersson, Johan. "Read my lips : Visuell talavläsning och buller". Thesis, Linköpings universitet, Institutionen för datavetenskap, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-71266.
Testo completoSanden, Thov Øye. "Bulder : stedsutvikling og potensialundersøking i Vingsand, Osen". Thesis, Norges teknisk-naturvitenskapelige universitet, Fakultet for arkitektur og billedkunst, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-24354.
Testo completoCsobod, Sylvia, e Vivian Lazar. "En undersökning av buller : Anläggningsprojekt E05 Korsvägen". Thesis, Högskolan i Borås, Akademin för textil, teknik och ekonomi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-21302.
Testo completoThis report covers projects E05 Korsvägen where the client is Trafikverket and the contractor West Link Contractors, WLC. We have chosen to examine a subject for the project and chose to immerse ourselves in noise issues. Korsvägen is a substage of the West Link built in central Gothenburg. The project will affect the environment with noise from the construction site. It is therefore interesting to investigate how the environment is affected and how workers and entrepreneurs within the project experience a noisy work environment. Furthermore, as there are increasingly large complex infrastructure projects, it is interesting to shed light on how WLC is working to achieve the requirements regarding noise. The report is a combination of quantitative and qualitative methodologies. The quantitative part consisted of two surveys. One survey examined the experience of nearby companies regarding noise disturbances from the project. The second survey examined how workers in the project are affected by noise in their daily work. For a deepening of how noise issues are handled within WLC, qualitative telephone interviews were conducted with selected people from the project. The results found that workers in the project are not sufficiently aware of the consequences and health effects caused by noise. Today there is no requirement to use hearing protection in the construction area, however, hearing protection should be used as needed when noisy work is carried out. Many workers believe that the use of hearing protection should be a requirement. The survey shows that noise from the project affects the surrounding activities and that the dissemination of information on noise disturbances is important. The noise requirements imposed against WLC have caused exemptions to be sought for certain noise-critical work operations. It also proved to be a challenge to work on these requirements for such a large project with many actors involved. Workers ' awareness of how noise affects health can be questioned. Although their daily work is perceived as noisy, they seem unaware of how noise can affect their future health. This is a health and safety issue that should be addressed. Improvement areas concerning noise issues are better communication between the parties involved and ensuring that information on noise disturbance reaches all concerned.
Libri sul tema "Bulmer"
H.P. Bulmer Holdings PLC., a cura di. H.P. Bulmer 1887-1987 centenary. Plough Lane, Hereford: H.P. Bulmer, 1987.
Cerca il testo completoplc, H. P. Bulmer Holdings. H. P. Bulmer 1887-1987 centenary. Hereford: H.P. Bulmer, 1987.
Cerca il testo completoH. P. Bulmer Holdings plc., a cura di. H P Bulmer 1887-1987 centenary. Hereford: H P Bulmer Holdings, 1988.
Cerca il testo completoEllen, Wilson. The parish register of Bulmer, 1571-1837. [Leeds]: Privately printed for the Parish Register Section, 1995.
Cerca il testo completoIsaac, Peter C. G. William Bulmer, the fine printer in context, 1757-1830. London: Bain & Williams, 1993.
Cerca il testo completoIsaac, Peter C. G. A third checklist of books, pamphlets and periodicals printed by William Bulmer. Wylam: Allenholme Press, 1986.
Cerca il testo completoIsaac, Peter C. G. A third checklist of books, pamphlets, and periodicals printed by William Bulmer. Wylam, Northumberland: Allenholme Press, 1986.
Cerca il testo completo1928-1988, Bulmer Ralph, e Pawley Andrew, a cura di. Man and a half: Essays in Pacific anthropology and ethnobiology in honour of Ralph Bulmer. Auckland: Polynesian Society, 1991.
Cerca il testo completoIsaac, Peter C. G. William Bulmer: The fine printer in context, 1757-1830 : expanded from the Sandars Lectures, Cambridge 1984. London: Bain & Williams, 1993.
Cerca il testo completoAinslie, Patricia. Cecil Buller, modernist printmaker =: Cecil Buller, graveur moderniste. Calgary, Alta., Canada: Glenbow Museum, 1989.
Cerca il testo completoCapitoli di libri sul tema "Bulmer"
Declerck, Francis, e Bruce Traill. "H P Bulmer Holdings Plc: the revival of cider". In Products and Process Innovation in the Food Industry, 122–37. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4613-1133-1_8.
Testo completoShattock, Joanne. "Bulwer." In The Selected Works of Margaret Oliphant, Part I Volume 1, 37–54. London: Routledge, 2024. http://dx.doi.org/10.4324/9781003513155-6.
Testo completoMehlhorn, Heinz. "Anoplocephaloides bulmeri". In Encyclopedia of Parasitology, 149. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-662-43978-4_3624.
Testo completoMehlhorn, Heinz. "Anoplocephaloides bulmeri". In Encyclopedia of Parasitology, 1. Berlin, Heidelberg: Springer Berlin Heidelberg, 2015. http://dx.doi.org/10.1007/978-3-642-27769-6_3624-1.
Testo completoSchaff, Barbara. "Bulwer-Lytton, Edward". In Kindlers Literatur Lexikon (KLL), 1. Stuttgart: J.B. Metzler, 2020. http://dx.doi.org/10.1007/978-3-476-05728-0_8111-1.
Testo completoSchaff, Barbara. "Edward Bulwer-Lytton". In Kindler Kompakt: Englische Literatur, 19. Jahrhundert, 146–48. Stuttgart: J.B. Metzler, 2015. http://dx.doi.org/10.1007/978-3-476-05527-9_31.
Testo completoKLL e Barbara Schaff. "Bulwer-Lytton, Edward: Pelham". In Kindlers Literatur Lexikon (KLL), 1–2. Stuttgart: J.B. Metzler, 2020. http://dx.doi.org/10.1007/978-3-476-05728-0_8112-1.
Testo completoKLL e Barbara Schaff. "Bulwer-Lytton, Edward: Rienzi". In Kindlers Literatur Lexikon (KLL), 1–2. Stuttgart: J.B. Metzler, 2020. http://dx.doi.org/10.1007/978-3-476-05728-0_8114-1.
Testo completoLoomba, Ania, e Jonathan Burton. "John Bulwer (1606–56)". In Race in Early Modern England, 240–47. New York: Palgrave Macmillan US, 2007. http://dx.doi.org/10.1057/9780230607330_92.
Testo completoKing, Ivan R. "Review of the Galactic Bulge". In Galactic Bulges, 3–20. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-0922-2_1.
Testo completoAtti di convegni sul tema "Bulmer"
Araque, Egler, Darren Love, Stephen Park, Daryl Rutt e Rick Clark. "Measuring the Effectiveness of Metal Weld Overlay Repairs Through Bulge Depth and Bulge Sharpness Analysis". In ASME 2019 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/pvp2019-93661.
Testo completoGrabe, Ju¨rgen, e Jan Du¨hrkop. "Laterally Loaded Piles With Bulge". In ASME 2007 26th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2007. http://dx.doi.org/10.1115/omae2007-29046.
Testo completoSamman, Mahmod, e Mohammad Samman. "Stress Analysis of Bulges in Cylindrical and Oval Pressure Vessels". In ASME 2014 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/pvp2014-28138.
Testo completoVivas, Gabriel A., Armando J. Moret, Roberto E. Bello, Luis M. Melian e Egler D. Araque. "Assessment of the Influence of the Use of Weld Overlay As a Repair Method on the Stress Level of Bulged Sections of Coke Drums". In ASME 2017 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/pvp2017-65412.
Testo completoDu¨hrkop, Jan, e Ju¨rgen Grabe. "Design of Laterally Loaded Piles With Bulge". In ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2009. http://dx.doi.org/10.1115/omae2009-79087.
Testo completovan Zyl, Gys, e Sultan Al-Harthi. "Fitness for Service Assessment and Repair of the Liner of a High Pressure Heat Exchanger". In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-85001.
Testo completoHimeno, M., S. Noda, R. Himeno e K. Fukasaku. "Application of Genetic Algorithm to Prediction of Artery Geometry". In ASME/JSME 2007 5th Joint Fluids Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/fedsm2007-37241.
Testo completoVivas, Gabriel A., Armando J. Moret, Roberto E. Bello, Luis M. Melian e Julian J. Bedoya. "Analysis of the Influence of the Cooling Patterns and the Shape of the Bulges on the Levels of Stress in the Cylindrical Section of Delayed Coke Drums". In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-85009.
Testo completoZhang, Xinyu, Qingzhen Yang, Yubo He, Xufei Wang e Saile Zhang. "Aerodynamic and Stealth Characteristics Analysis for a New Type of S-Shaped Inlet With Inner Bulge". In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-14396.
Testo completoPérez, I., P. Sánchez-Blázquez, Victor P. Debattista e C. C. Popescu. "The Role of Bars on Bulge Formation: Stellar Line-Strength Indices of Bulges". In HUNTING FOR THE DARK: THE HIDDEN SIDE OF GALAXY FORMATION. AIP, 2010. http://dx.doi.org/10.1063/1.3458504.
Testo completoRapporti di organizzazioni sul tema "Bulmer"
Werrell, Kenneth P. Hitting a Bullet with a Bullet A History of Ballistic Missile Defense. Fort Belvoir, VA: Defense Technical Information Center, gennaio 2000. http://dx.doi.org/10.21236/ada381863.
Testo completoGunzinger, Mark A. Bureaucratic Politics and the Silver Bullet. Fort Belvoir, VA: Defense Technical Information Center, gennaio 1996. http://dx.doi.org/10.21236/ada441436.
Testo completoKeppinger, Robert M., e James M. Garner. Soft Recovery of the M855 Bullet. Fort Belvoir, VA: Defense Technical Information Center, marzo 2010. http://dx.doi.org/10.21236/ada516821.
Testo completoMagee, Lionel, Aaron Oats e Michael Courtney. Comparing Measured Bullet Weight with Manufacturer Specifications. Fort Belvoir, VA: Defense Technical Information Center, febbraio 2012. http://dx.doi.org/10.21236/ada555976.
Testo completoWhitehead, Gary W. Missed Opportunity: Reducing the Bulge. Fort Belvoir, VA: Defense Technical Information Center, marzo 2001. http://dx.doi.org/10.21236/ada394050.
Testo completoBjella, Kevin, Daniel Vandevort e Sarah Kopczynski. Preliminary testing of expedient ground anchor solutions for guyed towers in remote cold regions : considerations for cold remote regions with limited tools. Engineer Research and Development Center (U.S.), luglio 2023. http://dx.doi.org/10.21079/11681/47328.
Testo completoHeinsohn, John, Michael Doherty, Cristina Bressler, Doug Atterbury e Charlie Moran. Powder Coating for Small-Arms Bullet Tip Identification. Fort Belvoir, VA: Defense Technical Information Center, luglio 2003. http://dx.doi.org/10.21236/ada607043.
Testo completoHogan, Juan J. UCAVs: Silver Bullet or Flash in the Pan. Fort Belvoir, VA: Defense Technical Information Center, febbraio 2003. http://dx.doi.org/10.21236/ada415544.
Testo completoBohnenkamp, Emily, Maurice Motley e Michael Courtney. Does Polishing a Rifle Bore Reduce Bullet Drag? Fort Belvoir, VA: Defense Technical Information Center, gennaio 2012. http://dx.doi.org/10.21236/ada556105.
Testo completoHudson, Kenneth L., Gene L. Fabian e Philip G. Malone. Demonstration of Shock-Absorbing Concrete (SACON) Bullet Trap Technology. Fort Belvoir, VA: Defense Technical Information Center, agosto 1999. http://dx.doi.org/10.21236/ada375365.
Testo completo