Bibliografie tematiche / Bridges

Letteratura scientifica selezionata sul tema "Bridges"

Autore: Grafiati
Pubblicato: 4 giugno 2021
Ultima modifica: 9 marzo 2023

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Indice

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Bridges".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Bridges"

1

Radnić, Jure, Domagoj Matešan e Ivan Banović. "Bridges with multiple structural systems: The example of Trilj Bridge reconstruction in Croatia". Bridge Structures 17, n. 1-2 (11 giugno 2021): 65–75. http://dx.doi.org/10.3233/brs-210185.

Testo completo
Abstract (sommario):
Development of multiple structural systems for bridges is useful in the design of new bridges and rehabilitation of existing bridges. This paper briefly presents some existing bridges with multiple structural systems and succinctly discusses design ideas for bridges with such systems. As an example of a bridge with multiple structural systems, the paper presents the reconstruction of a pedestrian suspension bridge in the City of Trilj, Croatia. The new bridge’s load-bearing structure is composed of several structural systems. Namely, the reconstructed bridge is a combination of suspension, cable-stayed and stress-ribbon bridge, which is laterally restrained with horizontal tensioned ropes. Numerical analysis was conducted on the renovated bridge. The results have shown an acceptable levels of stresses and deflections verifying the structural safety of the restored bridge. It is believed that this example of the bridge renovation may be useful in the design of new and strengthening of existing similar bridges.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Mohandas G.V e Sitansu k.Panda. "Hair pin bends of epicardial coronary arteries - a unique feature in multiple myocardial bridges". International Journal of Research in Pharmaceutical Sciences 10, n. 3 (26 luglio 2019): 2250–54. http://dx.doi.org/10.26452/ijrps.v10i3.1460.

Testo completo
Abstract (sommario):
Myocardial bridge(MB) is an anatomical variant. Sometimes MB can cause compression over the coronary arteries and causes ischemic heart diseases.MB associated with bends of coronary arteries double the risk of coronary artery disease. So the present study aimed to find out the incidence of bends of the coronary artery along with the myocardial bridging. 100 heart specimens were obtained from routine dissection conducted for undergradu­ate students in the department of Anatomy IMS & SUM Hospital Bhubaneswar. After the simple dissecting procedure, epicardial coronary arteries, their branches and myocardial bridges and hairpin bends of coronary arteries were observed. Myocardial bridges present 41 (41%) over Left anterior descending artery(LAD) only.Among 41 hearts single myocardial bridge present in 37((90.25%) hearts, double myocardial bridge were present in 3((7.31%) hearts and triple myocardial bridges present in only one heart(2.44%). Hairpin bends of the coronary artery were present in double and triple myocardial bridged hearts only. No hairpin bends of the coronary artery was observed in the single myocardial bridge. Hair pin bends of the coronary arteries are the unique features of the myocardial bridges in multiple myocardial bridges, i.e. double and triple myocardial bridges. However, hairpin bends of coronary arteries were absent in single myocardial bridged hearts.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Greenfield, Tina M., e Eugene S. Takle. "Bridge Frost Prediction by Heat and Mass Transfer Methods". Journal of Applied Meteorology and Climatology 45, n. 3 (1 marzo 2006): 517–25. http://dx.doi.org/10.1175/jam2356.1.

Testo completo
Abstract (sommario):
Abstract Frost on roadways and bridges can present hazardous conditions to motorists, particularly when it occurs in patches or on bridges when adjacent roadways are clear of frost. To minimize materials costs, vehicle corrosion, and negative environmental impacts, frost-suppression chemicals should be applied only when, where, and in the appropriate amounts needed to maintain roadways in a safe condition for motorists. Accurate forecasts of frost onset times, frost intensity, and frost disappearance (e.g., melting or sublimation) are needed to help roadway maintenance personnel decide when, where, and how much frost-suppression chemical to use. A finite-difference algorithm (BridgeT) has been developed that simulates vertical heat transfer in a bridge based on evolving meteorological conditions at its top and bottom as supplied by a weather forecast model. BridgeT simulates bridge temperatures at numerous points within the bridge (including its upper and lower surface) at each time step of the weather forecast model and calculates volume per unit area (i.e., depth) of deposited, melted, or sublimed frost. This model produces forecasts of bridge surface temperature, frost depth, and bridge condition (i.e., dry, wet, icy/snowy). Bridge frost predictions and bridge surface temperature are compared with observed and measured values to assess BridgeT's skill in forecasting bridge frost and associated conditions.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

SOUSA, Helder, Bruno J. A. COSTA, António Abel HENRIQUES, João BENTO e Joaquim A. FIGUEIRAS. "ASSESSMENT OF TRAFFIC LOAD EVENTS AND STRUCTURAL EFFECTS ON ROAD BRIDGES BASED ON STRAIN MEASUREMENTS". JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT 22, n. 4 (13 dicembre 2015): 457–69. http://dx.doi.org/10.3846/13923730.2014.897991.

Testo completo
Abstract (sommario):
Several technical and scientific publications have been made available focussing on Bridge Weight-in-Motion (BWIM) concerning railway bridges. On the contrary, BWIM analysis on road bridges are more scarce and therefore, this work intends to provide a contribution by presenting the BWIM analysis performed on two major road bridges in Portugal – Lezíria Bridge and Pinhão Bridge. These bridges are equipped with electric and optical strain gauges, acquisi­tion systems with features that allow high sampling rates. Based on the collected data and focussing on the bridges’ life­time, a probabilistic approach to quantify extreme traffic loads was implemented using extreme distribution functions. The bridges’ behaviour to these extreme traffic loads is numerically evaluated and a comparison with the alarm levels established by the bridge designers is performed. Although the bridge’s safety is not compromised, it was concluded that the representativeness of the observation period is a critical issue and the analysis of this kind of results must be care­fully considered. A comprehensive discussion about this matter is carried out at the end of this work.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Wibowo, Heriyanto, e Sinung Tri Nugroho. "Penerapan Metode Analythic Hierarchy Process untuk Pengambilan Keputusan Pemilihan Desain Jembatan Kereta Api". Jurnal Teknik Transportasi 1, n. 1 (20 aprile 2020): 40. http://dx.doi.org/10.54324/jtt.v1i1.429.

Testo completo
Abstract (sommario):
Padalarang - Purwakarta line track is a very crowded but potential track since it connects Jakarta - Bandung. Argo Parahyangan train and freight train are passing through this track. Therefore, it is crucial to build double track lane. However, it is difficult to execute due to a wide and deep river which requires a new bridge with a complex high cost construction. That is the reason why, an in-depth evaluation of the bridge design is needed. In selecting the bridge design, the Analytical Hierarchy Process was used as the selection method. The method would applied a four-level developed structure: the first level was the goal of choosing the Optimum Bridge Design, the second level was the people involved, the third level was the evaluation criteria, the last level was the alternative bridge to be built. The data was taken from the questionnaires filled by six respondents of the railway bridge's construction experts. The results show that the order of the bridge's design selection is as follows: 0.395 for concrete bridges; 0.213 for steel arch bridges; 0.199 for steel frame bridges; and 0.194 for cable bridges.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Li, Zi Qi, e Yan Yan Fan. "Study on Seismic Response Reduction of a Long-Span Cable-Stayed Bridge by Adding Viscous Dampers at the Different Positions". Advanced Materials Research 295-297 (luglio 2011): 2304–8. http://dx.doi.org/10.4028/www.scientific.net/amr.295-297.2304.

Testo completo
Abstract (sommario):
Bridge is an important part of transport system, especially for the long-span bridges of important route. And it belongs to the lifeline project. It is an important measure for reducing the secondary disaster to ensure bridge’s normality in traffic after the earthquake. Currently, the isolation seismic design of long-span bridges with the special structure is used to reduce damage of bridges by the reason of the earthquake. Based on damping principle of the viscous dampers, the calculation and analysis of what the effect of shock absorption done by damper in decorate position of long-span cable-stayed bridge to structure of bridges are formulated in this paper.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Tasnic, Mihail, e Ilia Catereniuc. "Some morphological aspects of myocardial bridges". Moldovan Medical Journal 64, n. 2 (maggio 2021): 58–64. http://dx.doi.org/10.52418/moldovan-med-j.64-2.21.11.

Testo completo
Abstract (sommario):
Background: Myocardial bridges are variants of the intramyocardial position of the coronary arteries. In the specialty literature, hot topics in cardiovascular field are myocardial infarction and non-obstructive coronary artery disease with frequent connection with myocardial bridges. Material and methods: The morphological study was based on the analysis of 200 human hearts and fragments of coronary arteries. The retrospective study was focused on the analysis of 6168 coronary angiography reports, to identify patients with myocardial bridges, their preferred location, the degree of systolic stenosis, the association between myocardial bridges and proximal to bridge and under the bridge coronary atherosclerosis. Results: The complete myocardial bridges were described in 62% of the analyzed hearts and only in 5.3% of the total number of studied coronarographies. In the majority of cases, the complete myocardial bridges covered the anterior interventricular branch. The degree of subpontine arterial systolic stenosis varied within 10-95%. The comparative study did not determine any correlations between the degree of subpontine vascular compression and the degree of the left ventricular myocardial hypertrophy. In 32% of cases were described proximal to bridge atherosclerotic plaques and only in one case (0.5%) – distal to bridge atherosclerotic plaques, located immediately under the bridge. Conclusions: The research findings underline the differences in anatomical and angiographic incidence of myocardial bridges, and the inability of all bridges to reduce the lumen of under bridged artery. Current study emphasizes attention to the topography of bridges, the correlation with ventricular hypertrophy and coronary atherosclerosis.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Helowicz, Andrzej. "Integral bridge and culvert design, Designer’s experience". Open Engineering 10, n. 1 (5 giugno 2020): 499–505. http://dx.doi.org/10.1515/eng-2020-0059.

Testo completo
Abstract (sommario):
AbstractThis paper describes a small single-span integral bridge made of in-situ concrete. The bridge was designed by the author and built on the M9 motorway between the towns of Waterford and Kilcullen in Ireland. Selected parts of the bridge design are presented. First the principles of modelling and designing integral bridges and culverts are explained. Then the considered bridge’s design is described. The advantages and disadvantages of such structures are discussed. The focus is on the design, construction, cost and in-service behaviour of small integral bridges and culverts. In Conclusions the author shares his knowledge and experience relating to the design of small integral bridges and culverts and puts forward recommendations as to further research on this type of structures in Poland.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Siwowski, Tomasz, e Piotr Żółtowski. "Strengthening Bridges with Prestressed CFRP Strips". Selected Scientific Papers - Journal of Civil Engineering 7, n. 1 (1 giugno 2012): 79–86. http://dx.doi.org/10.2478/v10299-012-0021-2.

Testo completo
Abstract (sommario):
Abstract Limitation of bridge’s carrying bearing capacity due to aging and deterioration is a common problem faced by road administration and drivers. Rehabilitation of bridges including strengthening may be applied in order to maintain or upgrade existing bridge parameters. The case studies of strengthening of two small bridges with high modulus prestressed CFRP strips have been presented in the paper. The first one - reinforced concrete slab bridge - and the other - composite steel-concrete girder bridge - have been successfully upgraded with quite new technology. In both cases the additional CFRP reinforcement let increasing of bridge carrying capacity from 15 till 40 metric tons. The CFRP strip prestressing system named Neoxe Prestressing System (NPS), developed by multi-disciplinary team and tested at full scale in Rzeszow University of Technology, has been also described in the paper.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Zdravkov, Lyubomir A. "Wind loads on girder bridges". Challenge Journal of Structural Mechanics 8, n. 1 (24 marzo 2022): 9. http://dx.doi.org/10.20528/cjsmec.2022.01.002.

Testo completo
Abstract (sommario):
Bridges are facilities that are in exploitation outdoor. Often the wind is the leading horizontal force in the transverse direction. Therefore the bridges have received the due attention in the standards for wind loading. Unfortunately, in all available standards for wind load on the bridges, one, summarized value of the aerodynamic coefficient is indicated. It is related to the entire cross-section of the facility. There is no differentiation for the individual longitudinal girders and/or roadway. Information about the specific wind pressure on each of the bridge’s element is required for the correct design of their supporting systems, whether they are framed or braced type. To fill this gap, the author has built several models of bridges with longitudinal girders, using a Computational Fluid Dynamics (CFD) analysis. Through them he determined the values of the aerodynamic coefficients for each of the bridge girders under the roadway and the cross-section of the bridge as a whole. Conclusions are summarized and the results clearly show the values of the aerodynamic coefficients for the whole section of the bridge are with 50-60% lower than the ones reported for the windward girder.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Bridges"

1

Hirachan, Jasmeen. "Development of experimental influence lines for bridges". Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file 1.88 Mb., 91 p, 2006. http://wwwlib.umi.com/dissertations/fullcit/1435843.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Ross, Justin Henry. "Evaluating ultimate bridge capacity through destructive testing of decommissioned bridges". Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 154 p, 2007. http://proquest.umi.com/pqdweb?did=1338919151&sid=8&Fmt=2&clientId=8331&RQT=309&VName=PQD.

Testo completo
Abstract (sommario):
Thesis (M.C.E.)--University of Delaware, 2007.
Principal faculty advisors: Michael J. Chajes and Jennifer Righman McConnell, Dept. of Civil & Environmental Engineering. Includes bibliographical references.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Donnée, Nicole Elizabeth Hughes Mary Leigh. "Automated screening tool for the stability of highway bridges subject to scour". Auburn, Ala, 2008. http://repo.lib.auburn.edu/EtdRoot/2008/SPRING/Civil_Engineering/Thesis/Donnee_Nicole_6.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Nelson, James Lee. "Behavior of GFRP Bridge Decks for Highway Bridges". NCSU, 2005. http://www.lib.ncsu.edu/theses/available/etd-12022005-144948/.

Testo completo
Abstract (sommario):
This research presents the results of an experimental program undertaken at the North Carolina State University (NCSU) Constructed Facilities Laboratory (CFL) to evaluate the performance of a new innovative glass fiber reinforced polymer (GFRP) bridge deck. This bridge deck is produced commercially by Martin Marietta Composites of Raleigh, NC under the trade name of DuraSpan. The experimental program involved examining the behavior of 5.00 inch deep and 7.66 inch deep DuraSpan bridge deck profiles. The program included numerous quasi-static flexural tests, testing of connection details to facilitate the development of a railing system, evaluation of the performance of the bond lines in negative moment regions, and an evaluation of the coefficient of thermal expansion. A finite element model was developed to predict the stiffness of the bridge deck at service load levels. Finite element optimization techniques were used in conjunction with coupon test data and the large scale flexural test data to calibrate the model.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Li, Zhenhu, e 李振虎. "Damage identification of bridges from signals measured with a moving vehicle". Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/206353.

Testo completo
Abstract (sommario):
Identifying damage of a bridge from a vehicle moving over it is an attractive idea especially for those bridges without structural health monitoring systems as it is faster than putting sensors on the bridges. Many parts of highways and railways have been constructed on bridges and it is important to ensure that they are in good conditions. Therefore a large amount of bridges need to be monitored and for the sake of economy the monitoring should be efficient. If an instrumented vehicle can identify the occurrence and locations of damage by running over the bridges, it would save a lot of labor and time. As acceleration is easier to acquire, it is used as the main signal for damage detection. Research in this area is relatively little, not to mention the need to take into account road surface roughness and experimental verification. Frequencies can be conveniently extracted from the vehicle response. The damage can hence be identified based on the relationship between the change of frequencies and the fractional change of strain energy. A vehicle-bridge interaction system is used to simulate the process of a vehicle running over a bridge and obtain the vehicle response for investigation. The proposed method can identify damage of simply supported and multi-span continuous bridges taking into account road surface roughness and measurement noise. They are also validated in the laboratory where a simply supported bridge is modeled using an aluminum beam and the vehicle is modeled with aluminum vehicles. This method can limit the damage location to two potential locations. The multi-level multi-pass strategy makes use of the identification from the above method, applies genetic algorithm and lets the vehicle run over the bridge at various speeds. The unique damage location can then be identified. A numerical study for simply supported bridges and multi-span continuous bridges has verified its effectiveness. Continuous wavelet transform (CWT) can identify local changes in a signal as damage is assumed to cause local change to the vehicle response, which makes it suitable for damage detection from vehicle response. However, the road surface roughness and measurement noise often mask the information about damage. Smoothing technique and damage indicators are proposed to help with the identification. By validating the method with a numerical vehicle-bridge interaction system and model tests in the laboratory, the damage can be correctly identified. Additional masses and sinusoidal excitation force can help with the identification too. Repeated application of CWT involves applying the CWT to the coefficients of continuous wavelet again and again, which can also improve the results. If CWT is treated as a mathematical microscope, repeated application of CWT is like amplifying the signal several times. The effectiveness of the method has been verified numerically and experimentally. In summary, a convenient and efficient technique to test the conditions of bridges by putting sensors on a moving vehicle is proposed and the method is verified by numerical and experimental studies. It can provide an alternative or a useful complement to conventional structural health monitoring systems.
published_or_final_version
Civil Engineering
Doctoral
Doctor of Philosophy
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Snedeker, Katherine O. "Evaluation of performance and maximum length of continuous decks in simple-span bridges". Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/28210.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Sugioka, Koichi. "Life cycle evaluation of fatigue mitigation for orthotropic steel bridge decks". Thesis, University of Canterbury. Civil and Natural Resources Engineering, 2009. http://hdl.handle.net/10092/3232.

Testo completo
Abstract (sommario):
Bridges with orthotropic steel decks have been built across the world over the past 60 years because they provide high strength and stiffness at a relatively low cost. However, a number of these bridges have sustained fatigue fractures. The investigation described in this thesis was carried out in order to identify cost-effective fatigue crack mitigation techniques by using the deck surfacing to reduce the stresses in the steel deck. Epoxy asphalt with an expanded metal mesh was investigated with small- and large-scale laboratory tests. Finite element analyses were also performed. The small scale tests conducted at different temperatures and loading frequencies showed that asphalt stiffness increased with decreasing temperature and faster loading. The expanded metal mesh in the epoxy asphalt layer noticeably increased asphalt stiffness. In the large scale tests and finite element analyses, critical loading positions to cause stress concentrations at the fatigue prone rib-to-deck welded connections were determined with different tyre configurations. The stress reduction due to the deck surfacing was estimated for the critical loading positions. The full scale test specimen was subjected to actual truck tyres. With the effectiveness of mitigation techniques for fatigue cracks on orthotropic steel bridge decks known, a probability-based fatigue lifetime evaluation methodology using Monte Carlo simulation was developed. The deck surfacing effects with seasonal and hourly temperature variations were considered. The fatigue lifetime extension using the epoxy asphalt was quantified. For a particular bridge, cost-effective maintenance scenarios were investigated. A simple calculation method for fatigue lifetime was introduced for engineers or bridge owners to assist understanding of decision support tool concepts.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Ding, Qiang. "Buffeting analysis of cable-supported bridges under turbulent wind in time domain /". Hong Kong : University of Hong Kong, 1999. http://sunzi.lib.hku.hk/hkuto/record.jsp?B21106538.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Williams, Melissa. "A plan for the long-term performance of bridges". Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 229 p, 2007. http://proquest.umi.com/pqdweb?did=1251904781&sid=1&Fmt=2&clientId=8331&RQT=309&VName=PQD.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Krajewski, Joseph E. "Bridge inspection and interferometry". Link to electronic thesis, 2006. http://www.wpi.edu/Pubs/ETD/Available/etd-050406-092613/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Bridges"

1

Bridges. London: Macmillan, 1989.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Ardley, Neil. Bridges. Ada, OK: Garrett Educational Corporation, 1990.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

David, Outerbridge, a cura di. Bridges. New York: Abrams, 1989.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Willard, Keith. Bridges. Mankato, Minn: Creative Education, 2000.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Rickard, Graham. Bridges. New York: Bookwright Press, 1987.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Bridges. Minneapolis, MN: Jump!, Inc., 2016.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Bakht, Baidar, e Aftab Mufti. Bridges. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17843-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

(Firm), Alleycat Design, a cura di. Bridges. New York: Black Dog & Leventhal Publishers, 1997.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Steel, Sara. Bridges. London: Young Library, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Ostrow, Steven A. Bridges. New York: Metro Books, 1997.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Bridges"

1

Matsagar, Vasant, Saeid Eslamian, Kaveh Ostad-Ali-Askari, Mohammad Raeisi, George Lee, Sona Pazdar e Aida Bagheri-Basmenji. "Bridges". In Encyclopedia of Earth Sciences Series, 1–20. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-12127-7_35-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Bonnington, C. Paul, e Charles H. C. Little. "Bridges". In The Foundations of Topological Graph Theory, 153–59. New York, NY: Springer New York, 1995. http://dx.doi.org/10.1007/978-1-4612-2540-9_10.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Wenzel, Helmut. "Bridges". In Handbook of Technical Diagnostics, 429–51. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-25850-3_22.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Holmes, John D., e Seifu A. Bekele. "Bridges". In Wind Loading of Structures, 383–408. Fourth edition. | Boca Raton : CRC Press, 2021. |: CRC Press, 2020. http://dx.doi.org/10.1201/9780429296123-12.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Uzmi, Zartsh Afzal, e Tariq Mahmood Jadoon. "Bridges". In Handbook of Computer Networks, 390–402. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118256053.ch25.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Matsagar, Vasant, Saeid Eslamian, Kaveh Ostad-Ali-Askari, Mohammad Raeisi, George Lee, Sona Pazdar e Aida Bagheri-Basmenji. "Bridges". In Encyclopedia of Earth Sciences Series, 74–92. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73568-9_35.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Roznowski, Rob. "Bridges". In Roadblocks in Acting, 167–78. London: Macmillan Education UK, 2017. http://dx.doi.org/10.1057/978-1-137-60970-0_9.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Crane, Ralph J. "Bridges". In Inventing India, 75–99. London: Palgrave Macmillan UK, 1992. http://dx.doi.org/10.1057/9780230380080_4.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Lassmann, Wolfgang. "Bridges". In Lost To Desire, 262–86. London: Routledge, 2021. http://dx.doi.org/10.4324/9781003228363-14.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Proske, Dirk. "Bridges". In The Collapse Frequency of Structures, 31–50. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-97247-9_3.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Bridges"

1

Bodnar, Larysa, e Alexander Kanin. "A model for assessing the priority of the bridges within their repair strategy". In 6th International Conference on Road and Rail Infrastructure. University of Zagreb Faculty of Civil Engineering, 2021. http://dx.doi.org/10.5592/co/cetra.2020.1212.

Testo completo
Abstract (sommario):
The efficiency of the road network operation significantly depends on ensuring the durability and operational reliability of road bridges. To prevent accidents on bridges, ensure their reliability and durability, it is necessary to perform a set of measures, including the following: inspection of bridges, determination of their operational condition, calculation of residual life, development of recommendations for their further operation, and performance of operational measures. Considering the significant quantity of bridges in Ukraine, most of these activities have to be performed using modern information technology. Therefore, an Analytical Expert Bridge Management System Software Complex (AESUM) for bridges of Ukraine on public roads was developed and implemented. An important component of this software complex is the procedures for development of a strategy of repairs in the system of road bridges operation. One of the components of the mathematical model, which is the basis for justifying the repairing strategy, is a system of priorities for bridges repairs, taking into account their importance. This scientific paper considers the current system of priority, which takes into account the technical and operational condition of bridges and the category of roads on which they are located. A new model for evaluation of the priorities of repairs is proposed which takes into account such factors as importance of the bridge, technical and operational condition of the bridge, traffic capacity of the bridge and the cost-effectiveness of repairs. The factors mentioned above consist of a set of sub-factors. For example, the bridge importance factor consists of such sub-factors as the average daily traffic volume, the bypass influence, the bridge's affiliation with international transport corridors, etc.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Rokneddin, Keivan, Jayadipta Ghosh, Jamie E. Padgett e Leonardo Duenas Osorio. "The Effects of Deteriorating Bridges on Bridges on the Bridge Network Connectivity". In Structures Congress 2011. Reston, VA: American Society of Civil Engineers, 2011. http://dx.doi.org/10.1061/41171(401)260.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ge, Yaojun, e Naeem Hussain. "Innovation and Creation of Recent Bridge Engineering under the Direction of IABSE Outstanding Structure Award". In IABSE Congress, Nanjing 2022: Bridges and Structures: Connection, Integration and Harmonisation. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2022. http://dx.doi.org/10.2749/nanjing.2022.0042.

Testo completo
Abstract (sommario):
<p>Over recent years there has been considerable development in bridge engineering. Thirty-two bridge projects have received IABSE Outstanding Structure Awards during the past two decades in recognition of the most remarkable, innovative, creative, or otherwise stimulating structures. Several creative structural forms have been created such as two twin-box girder suspension bridges, three spatial main cable suspension bridges, six multi-main-span cable-supported bridges and one cable-stayed and suspension hybrid bridge. Various innovative material combinations have been developed and used in two steel truss and PC flange composite girder bridges, one butterfly web extradosed bridge, one multiple material strength bridge and one long-life concrete cable-stayed bridge. Some remarkable functional technologies have been invented for two remarkable movable bridges, two innovative cable-stayed bridges, two extreme seismic function cable-supported bridges and two environmental coordination bridges. Many stimulating bridge projects have been awarded as Winners or Finalists including three extradosed bridges, four arch bridges, two cable-stayed bridges and four sea-crossing bridges. The innovation and creation of recent bridge engineering has been recognised by IABSE Outstanding Structure Award reflecting the creative structural forms, the innovative material combinations, the remarkable functional technologies and the stimulating bridge projects.</p>
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Bougacha, Samir, Hongwei Cai, Jeffry Booher e Marshall Newlin. "Rational Analysis for Understanding Skewed Steel Bridge Cross-Frame Behavior". In IABSE Congress, New York, New York 2019: The Evolving Metropolis. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2019. http://dx.doi.org/10.2749/newyork.2019.1371.

Testo completo
Abstract (sommario):
<p>The design of skewed I-girder steel bridges is common throughout the country. Such bridges have been fabricated and constructed and have generally performed well. Where issues have been encountered, they were primarily related to bridge construction and, quite often to the torsional behavior of the severely skewed bridge superstructure. Until recently, there have been few analysis and design guidelines available to the structural designer on the construction engineering of the skewed I-girder bridges. AASHTO [1] specifies that the contract documents should state the fit condition for which the cross frames are detailed for I-girder bridges. Recommendations are also provided for the estimation of the cross frame locked-in forces. This paper presents a case study in a fit-up analysis of multi-span skewed I-girder steel bridge using 3D finite element method modeling. Fit-up analysis was carried out to evaluate girder’s web distortions, determine the cross- frames locked-in forces and compare them to the recent AASHTO’s recommendations. The paper should provide designers with a more detailed understanding of a bridge’s behavior in this condition as compared with the more generalized recommendations from AASHTO guidelines.</p>
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Täljsten, Björn, Thomas Blanksvärd, Gabriel Sas, Niklas Bagge, Jonny Nilimaa, Cosmin Popescu, Lennart Elfgren, Anders Carolin e Jens Häggström. "Bridges Tested to Failure in Sweden". In IABSE Conference, Copenhagen 2018: Engineering the Past, to Meet the Needs of the Future. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2018. http://dx.doi.org/10.2749/copenhagen.2018.064.

Testo completo
Abstract (sommario):
Five bridges of different types have been tested to failure and the results have been compared to analyses of the load-carrying capacity using standard code models and advanced numerical methods. The results may help to make accurate assessments of similar existing bridges. There it is necessary to know the real behaviour, weak points, and to be able to model the load-carrying capacity in a correct way.<p> The five bridges were: (1) a strengthened one span concrete road bridge - Stora Höga ; (2) a one span concrete rail trough bridge loaded in fatigue – Lautajokk; (3) a two span strengthened concrete trough railway bridge - Övik; (4) a one span railway steel truss bridge -Åby; and (5) a five span prestressed concrete road bridge - Kiruna. The unique results in the paper are the experiences of the real failure types, the robustness/weakness of the bridges, and the accuracy and shortcomings/potentials of different codes and models for safety assessment of existing structures.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Hong, Namhee K., Hyun-Moo Koh e Sung-Gul Hong. "Exploration of Cable-Supported Pedestrian Bridges". In IABSE Congress, New York, New York 2019: The Evolving Metropolis. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2019. http://dx.doi.org/10.2749/newyork.2019.2007.

Testo completo
Abstract (sommario):
<p>The variety of transparency, lightness, and shape of cable-supported bridges is being actively utilized in the design of pedestrian bridges. Moreover, the pedestrian bridge, which is demanded to play a key role as a harmonious structure with surrounding landscape, is being reborn as a landmark sculpture. Considering that understanding design trends is very important step to establish design guide lines for future design, existing cable-supported pedestrian bridges developed until recently have been investigated considering structural material, structural system, and architectural styles. The visual inspiration of the pedestrian bridge is felt in the sense of the structure and the structural form is determined to satisfy the geometric design requirements while considering the efficiency and stability of the cable structure. Therefore, it is needed to identify the main variables affecting the cable-support structures and understand the true beauty of bridges by comparing and analyzing various bridge cases based on major variables. This paper will focus mainly on the following issues:</p><p>(1) the classification of types of cable-supported pedestrian bridges; (2) the identification of the important factors affecting structural forms and (3) an integrated framework for future pedestrian bridges considering form, function, and behavior. Note that the relationship between structural form and visual form is explained using graphical approach. It is expected that this study will help to explore future pedestrian bridges considering bridge aesthetics.</p>
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Shipilov, A. G., e T. A. Titarenko. "CITY PEDESTRIAN BRIDGES". In INNOVATIONS IN THE SOCIOCULTURAL SPACE. Amur State University, 2020. http://dx.doi.org/10.22250/iss.2020.27.

Testo completo
Abstract (sommario):
The article considers the problems of pedestrian communication in the city of Vladivostok. The review of domestic and foreign experience in the construction of pedestrian bridges. Conclusions are drawn of the main aesthetic, social, structural and artistic criteria for the quality of modern pedestrian bridges. In the part of the research results, the author's solution of the air pedestrian bridge in Vladivostok is given.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Pál, Gábor, Attila Dési e András Kemenczés. "Continuous Arch Bridges Over Lake Tisza, Hungary". In Footbridge 2022 (Madrid): Creating Experience. Madrid, Spain: Asociación Española de Ingeniería Estructural, 2021. http://dx.doi.org/10.24904/footbridge2022.098.

Testo completo
Abstract (sommario):
<p>The design and construction process of the unique cycling bridges at Lake Tisza are presented in this article. The 4 new bridges are parts of the closing segment of the cycle route around the artificial reservoir, which is a popular tourist destination in Hungary, and part of the UNESCO World Heritage. The proximity of the natural environment motivated the use of organic, flowing shapes.</p><p>The unique Eger- and Szomorka bridges are independent continuous half-through arch bridges, 8 spans with a total length of 308.46m, and 3 spans with a total length of 86.30 m, respectively. The bridge over River Tisza is a 5 span bridge with a total length of 279.47 m, which is placed on the extended piers of the existing roadway bridge. It consists of 2 deck truss bridges on the side-spans and 3 network arch bridges in the mid- spans. A 5.70 m span bascule bridge over one of the draining canals of the lake was also accomplished as part of the project.</p><p>The Eger and Szomorka bridges are internationally unique due to the fact that the Designers have dreamed a continuous sinusoid wave on the supports; which, by twirling under and above the deck, results in a continuous structure. The successful construction of the Tisza River Bridge also required some special and unprecedented construction methods.</p>
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Kolísko, Jiří, Petr Tej, David Čítek, Jan Marek, Milan Kalný e Jan Komanec. "New UHPFRC Bridges in Czech Republic". In IABSE Symposium, Prague 2022: Challenges for Existing and Oncoming Structures. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2022. http://dx.doi.org/10.2749/prague.2022.0309.

Testo completo
Abstract (sommario):
<p>This paper deals with new UHPFRC (Ultra High Performance Fibre Reinforced Concrete) bridges produced or constructed in 2018 in Czech Republic. The paper includes a short description of 3 unique pedestrian bridges with load bearing structure made of UHPFRC and 2 steel bridges over the railway track with lost formwork for bridge decks and cornices made of thin UHPFRC slabs.</p> <p>Focus is given on the testing of the material, comparison of test specimens and summary of results from UHPFRC production in real size volume of cubic meters. The size effect of control specimen and the results analysis is given in the last chapter.</p> <p>The 3 mentioned unique pedestrian bridges are Footbridge over the Lubina river in city Příbor, Pedestrian and cycle bridge in the vicinity of Black Bridges in city Tábor and Footbridge over Dřetovice stream in Vrapice - city part of Kladno. All new UHPFRC structures should be worthy of attention of bridge experts and community of specialists in the field of concrete engineering.</p>
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Li, Ying. "Conspectus of Bridge Criticism". In IABSE Congress, Stockholm 2016: Challenges in Design and Construction of an Innovative and Sustainable Built Environment. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2016. http://dx.doi.org/10.2749/stockholm.2016.0742.

Testo completo
Abstract (sommario):
The study on bridge criticism is an interdisciplinary research of the theory of bridge engineering, architectural criticism, art criticism and bridge aesthetics. It is an important part of design theory of bridges. Generally speaking, bridge criticism is the identification and evaluation of creative thoughts of bridges, the design of bridges, the process of bridge construction and service, and the social individual and public using of bridges. This research focuses on the forming process, operating model, characteristics and value of bridge criticism. The main research contents include axiology, subjectivity theory, semiotics and methodology of bridge criticism. Based on theories of bridge criticism, this paper comes up with an evaluation method of urban bridges.
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Bridges"

1

Wang, Yao, Mirela D. Tumbeva e Ashley P. Thrall. Evaluating Reserve Strength of Girder Bridges Due to Bridge Rail Load Shedding. Purdue University, 2021. http://dx.doi.org/10.5703/1288284317308.

Testo completo
Abstract (sommario):
This research experimentally and numerically evaluated the reserve strength of girder bridges due to bridge rail load shedding. The investigation included: (1) performing non-destructive field testing on two steel girder bridges and one prestressed concrete girder bridge, (2) developing validated finite element numerical models, and (3) performing parametric numerical investigations using the validated numerical modeling approach. Measured data indicated that intact, integral, reinforced concrete rails participate in carrying live load. Research results culminated in recommendations to evaluate the reserve strength of girder bridges due to the participation of the rail, as well as recommendations for bridge inspectors for evaluating steel girder bridges subjected to vehicular collision.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Chang, Luh, Tarek Zayed e Jon Fricker. Steel Bridge Protection Policy: Evaluation of Bridge Coating system for INDOT Steel Bridges. West Lafayette, IN: Purdue University, 1999. http://dx.doi.org/10.5703/1288284313319.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Demina, O. A., e S. A. Bakhtin. Tutorial Bridges, tunnels. OFERNIO, luglio 2020. http://dx.doi.org/10.12731/ofernio.2020.24544.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

ABERDEEN TEST CENTER MD SUPPORT EQUIPMENT DIV. Bridges and Equipment. Fort Belvoir, VA: Defense Technical Information Center, settembre 2009. http://dx.doi.org/10.21236/ada505642.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Chang, Luh, Tarek Zayed e Jon Fricker. Steel Bridge Protection Policy: Metalization of Steel Bridges: Research and Practice. West Lafayette, IN: Purdue University, 1999. http://dx.doi.org/10.5703/1288284313322.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Bonthron, Leslie, Corey Beck, Alana Lund, Farida Mahmud, Xin Zhang, Rebeca Orellana Montano, Shirley J. Dyke, Julio Ramirez, Yenan Cao e George Mavroeidis. Empowering the Indiana Bridge Inventory Database Toward Rapid Seismic Vulnerability Assessment. Purdue University, 2021. http://dx.doi.org/10.5703/1288284317282.

Testo completo
Abstract (sommario):
With the recent identification of the Wabash Valley Seismic Zone in addition to the New Madrid Seismic Zone, Indiana’s Department of Transportation (INDOT) has become concerned with ensuring the adequate seismic performance of their bridge network. While INDOT made an effort to reduce the seismic vulnerability of newly-constructed bridges, many less recent bridges still have the potential for vulnerability. Analyzing these bridges’ seismic vulnerability is a vital task. However, developing a detailed dynamic model for every bridge in the state using information from structural drawings is rather tedious and time-consuming. In this study, we develop a simplified dynamic assessment procedure using readily-available information from INDOT’s Bridge Asset Management Program (BIAS), to rapidly identify vulnerable bridges throughout the state. Eight additional data items are recommended to be added into BIAS to support the procedure. The procedure is applied in the Excel file to create a tool, which is able to automatically implement the simplified bridge seismic analysis procedure. The simplified dynamic assessment procedure and the Excel tool enable INDOT to perform seismic vulnerability assessment and identify bridges more frequently. INDOT can prioritize these bridges for seismic retrofits and efficiently ensure the adequate seismic performance of their assets.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Eastlake, D., R. Perlman, A. Ghanwani, D. Dutt e V. Manral. Routing Bridges (RBridges): Adjacency. RFC Editor, luglio 2011. http://dx.doi.org/10.17487/rfc6327.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Woodwell, William H. Woodwell, Jr. Building Bridges on Immigration. New York, NY United States: Carnegie Corporation of New York, ottobre 2021. http://dx.doi.org/10.15868/socialsector.39036.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Frosch, Robert, e Adam Morel. Guardrails for Use on Historic Bridges: Volume 2—Bridge Deck Overhang Design. Purdue University, giugno 2017. http://dx.doi.org/10.5703/1288284316361.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Lam, H., S. M. Marcuccio, P. I. Svirskaya, S. Greenberg, A. B. Lever e C. C. Leznoff. Binuclear Phthalocyanines with Aromatic Bridges. Fort Belvoir, VA: Defense Technical Information Center, marzo 1989. http://dx.doi.org/10.21236/ada205868.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Bridges":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia