Accedi

Bibliografie tematiche / Bench study

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Bench study"

Autore: Grafiati

Pubblicato: 21 settembre 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Bench study".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Bench study"

1

Mei, Xiao Ren. "Optimization Study on Stability of Dragline Stripping Bench and Mining Parameters of Dragline Stripping Technology". Advanced Materials Research 361-363 (ottobre 2011): 183–87. http://dx.doi.org/10.4028/www.scientific.net/amr.361-363.183.

Testo completo

Abstract (sommario):

Heidaigou Surface Coal Mine (HSCM) is a large surfaces coal mine that first uses the throwing blasting - dragline stripping technology. Lots of new demanding prompt solution issues appears in HSCM without any successful experience in China, such as the stability of dragline stripping bench, the design and implementation of throwing blasting parameters, and the optimization of dragline stripping technology parameters. Rigid Body Limit Equilibrium Method (RBLEM) was used to study the safety and stability of dragline solid high bench and dragline stripping loosen bench under different workface parameters and influence factors. The safe operation parameters of dragline stripping bench are proposed. The dozer lowered height of the stripping bench, the width of extended bench and dragline operation parameters are optimized using the Optimization System of Dragline Stripping Technology (OSDST). The results can provide the decision support for HSCM.

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Jalalian, Mohammad Hossein, Raheb Bagherpour e Mehrbod Khoshouei. "GEOLOGICAL INVESTIGATIONS AND PRODUCTION PLANNING BY IDENTIFICATION OF THE DISCONTINUITIES AND ROCK MASS BLOCKS IN DIMENSION STONE QUARRIES: A CASE STUDY". Rudarsko-geološko-naftni zbornik 39, n. 2 (2024): 85–95. http://dx.doi.org/10.17794/rgn.2024.2.7.

Testo completo

Abstract (sommario):

The dimension stone industry faces a significant environmental challenge due to the large amount of waste produced during the production process. About 51.3% of the materials extracted from dimension stone quarries worldwide end up as quarry waste. The presence of discontinuities and fractures primarily causes this waste. However, by examining the characteristics of these discontinuities and fractures and identifying in-situ blocks of the rock mass, it is possible to reduce the amount of waste produced during dimension stone quarrying. This study focuses on an abandoned quarry bench of the Lashotor quarries complex in the Isfahan Province, Iran. Due to high waste production, the quarry bench was left unused. The study aimed to identify the in-situ blocks of the quarry bench by examining the characteristics of the rock mass’s discontinuities and fractures. The authors used a modified algorithm to identify and grade all the quarry bench blocks based on the target market. The study revealed that some blocks in the abandoned quarry bench could be supplied to the target market, and the bench has the potential for block extraction. The algorithm’s modification based on the shape factor of blocks is an important innovation that increases the accuracy of block determination compared to previous methods. Overall, this algorithm can be used as a decision-making tool in extracting or not extracting the quarry bench of dimension stone quarries and implementing an optimal cutting pattern to reduce waste production.

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Pavlovic, D. "Original and a ‘bench study’ replica". Anaesthesia 65, n. 4 (17 marzo 2010): 413. http://dx.doi.org/10.1111/j.1365-2044.2010.06286_1.x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Meacham, Nelson, e Tom Scott. "Bench-Test Study Subgroup Report Synopsis". SMPTE Motion Imaging Journal 121, n. 8 (novembre 2012): 27–29. http://dx.doi.org/10.5594/j18245xy.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Litvin, Oleg, Vladimir Makarov, Andrey Strelnikov e Ekaterina Tyuleneva. "Study of the Backhoe’s Digging Modes at Rock Face Working-Out". E3S Web of Conferences 105 (2019): 01024. http://dx.doi.org/10.1051/e3sconf/201910501024.

Testo completo

Abstract (sommario):

As is known from the classic works on open pit mining, the bench is a separately developed part of the rock layer, having the form of a step. It should also be noted that it is necessary to clearly differentiate the concepts of “bench height” and “height of the layer to be removed.” The benches are often divided into subbenches, developed by different excavation equipment or by the same equipment both sequentially and simultaneously, but having transport routes that are uniform for the bench. As an example, an excavator stripping of the upper and lower subbenches with loading, respectively, at the level of the excavator and above this level, is usually given, that is, the transport route (road) passes through an intermediate platform bench located in the middle of its height. Therefore, the excavation layer of any height, which is, in fact, a part of the working bench, can be considered as an independent bench with all its attributes, but in order to avoid duplication of definitions, this paper suggests the name “extraction layer”. When developing this element various digging modes can be applied. In this paper, we studied the main modes and selected the one that provides the highest performance.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Feng, Hui Zong, Yun Gong You, Zhi Yu Huang e Zhi Liang Xian. "Study and Realization of Test Bench for Electric Vehicle Drive System Based on HIL". Applied Mechanics and Materials 401-403 (settembre 2013): 1255–59. http://dx.doi.org/10.4028/www.scientific.net/amm.401-403.1255.

Testo completo

Abstract (sommario):

In this paper, the test bench for electric vehicle drive system is designed and the real-time display of speed, torque, current, voltage and other conventional parameters are realized that can offer lots of authentic data for motor performance evaluation, motor parametric design and optimizing control strategy. Road simulation is an important function in the test bench, so the paper analyses the driving electric vehicle in the longitudinal and gives the theoretical dynamometer dynamic output load values that can provide the theory reference for the further implementation of road conditions simulation based on LabVIEW. Finally, in order to validate the test bench feasibility, the start, accelerated and deceleration tests are implemented and show good performance of the bench.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Lee, Yunjeong, Akiko Nishino, Yuji Matsuda, Toshio Otsuki e Kazuhiko Nishide. "A Study on Community Formation Patterns Based on the Usage of Benches by Seniors". Innovation in Aging 4, Supplement_1 (1 dicembre 2020): 437. http://dx.doi.org/10.1093/geroni/igaa057.1411.

Testo completo

Abstract (sommario):

Abstract In Japan, the rate of aging exceeds 27%, and the decline of communities has been an issue. Therefore, in this study we take the T housing complex as an example where the rate of aging is more than 40% and aim to understand the usage pattern of benches. An observational research was conducted for 19 days to examine the usage of a total of 23 benches, 17 existing ones and 6 newly installed ones, in the T housing complex. This investigation led to the findings. An average of 417 people used the benches in a day. Research determined that there are four different types of bench utilization, and they each present different ways of building relationships with other people. Bench use behavior was broken into four different categories. Sitting on a bench alone (without building relationships with others) was classified as “single use”. Sitting on a bench with another person but not engaging in any relationship-building behavior was classified as “sharing”. Sitting on a bench and exhibiting relationship-building behavior with others (such as through talking) was classified as “chatting”. Sitting with companions in groups of 3 or more people and exhibiting relationship-building behavior was classified as “group use”. Our findings provide evidence that a bench can be a device to foster the formation of diverse communities.

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Yang, Zhen Xing, Liang Song, Hao Wang, Yu Yong Jiao, Shu Cai Li, Amoussou Coffi Adoko e Huan Qiang Zhang. "Study on the Mechanical Behavior of Excavation and Support Construction of Shallow Tunnel". Applied Mechanics and Materials 353-356 (agosto 2013): 1693–98. http://dx.doi.org/10.4028/www.scientific.net/amm.353-356.1693.

Testo completo

Abstract (sommario):

In this paper, the mechanical behavior of excavation and support construction of Weishe tunnel, which is a section of the Yangwu expressway, is studied quantitatively using 3D finite difference numerical simulation method. A sequential excavation method is used and the results show that the vault settlement occurs mainly on the phase of upper bench excavation. The convergences of upper and lower sidewalls occur mainly on the phase of lower bench excavation. During the construction, the surrounding rock pressure in the vault and sidewall of the tunnel decrease. Axial force of anchor reaches the maximum value after the finish of second lining. However, the surrounding rock pressure and internal force of steel arch reach the maximum value after completing the upper bench excavation, and then become as smaller as half of the peak value during the lower bench excavation.

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Jung, Jongjin. "Study on Development and Feasibility of Bench Tester for UV Flame Detector". Journal of the Korean Society of Hazard Mitigation 20, n. 2 (30 aprile 2020): 147–52. http://dx.doi.org/10.9798/kosham.2020.20.2.147.

Testo completo

Abstract (sommario):

In this study, the concept of bench test was established to replace the real distance test conducted outdoors for determining the sensitivity of UV flame detectors. In addition, the experimental apparatus of the bench test was developed and its validity was confirmed. The fire source of bench experiments used a microburner (6 mm diameter) using liquefied petroleum gas, and the bench test was performed with a flame height of 5 cm. The flame detector used in the experiment was a UV flame detector, and the amount of light was measured up to 2.4 m at a distance of 0.2 m from the fire source. The amount of light was used by converting the output signal of the UV sensor of the flame detector into an electrical signal. The fire source of the real distance test used normal heptane (n-Heptane) and measured the light up to 36 m at 5 m intervals. As a result of comparing the distance-light quantity measured in the two experiments, a straight line with the same slope was obtained and it was confirmed that bench test is possible indoors. The results of this study, if used by manufacturers in the development of flame detectors, will enable quality and performance improvements.

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Santos-Rocha, Rita, e António Veloso. "Comparative Study of Plantar Pressure during Step Exercise in Different Floor Conditions". Journal of Applied Biomechanics 23, n. 2 (maggio 2007): 162–68. http://dx.doi.org/10.1123/jab.23.2.162.

Testo completo

Abstract (sommario):

Mechanical load has been estimated during step exercise based on ground reaction force (GRF) obtained by force platforms. It is not yet accurately known whether these measures reflect foot contact forces once the latter depend on footwear and are potentially modified by the compliant properties of the step bench. The aim of the study was to compare maximal and mean plantar pressure (PP), and maximal GRF obtained by pressure insoles after performing seven movements both over two metal force platforms and over the step bench. Fifteen step-experienced females performed the movements at the cadences of 130 and 140 beats per minute. PP and GRF (estimated from PP) obtained for each floor condition were compared. Maximal PP ranged from 29.27 ± 9.94 to 47.07 ± 12.88 N/cm2 as for metal platforms, and from 28.20 ± 9.32 to 43.00 ± 13.80 N/cm2 as for the step bench. Mean PP ranged from 11.09 ± 1.62 to 14.32 ± 2.06 N/cm2 (platforms) and from 10.71 ± 1.54 to 14.22 ± 1.77 N/cm2 (step bench). GRF (normalized body weight) ranged from 1.43 ± 0.14 to 2.41 ± 0.24 BW (platforms) and from 1.38 ± 0.14 to 2.36 ± 0.19 BW (step bench). No significant statistical differences were obtained for most of the comparisons between the two conditions tested. The results suggest that metal force platform surfaces are suitable to assess mechanical load during this physical activity. The forces applied to the foot are similar to the softer step bench and the hard force platform surface. This may reflect the ability of the performers to adapt their movement patterns to normalize the impact forces in different floor conditions.

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Bench study"

1

Hollabaugh, Craig Allen. "The implementation of the laboratory bench emulator". Diss., Georgia Institute of Technology, 1993. http://hdl.handle.net/1853/14841.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Ghaniyari, Benis Saeid. "PERFORMANCE STUDY OF A BENCH SCALE SHALE SHAKER". University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1508665897207133.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Yu, Irene W. 1978. "Bench-scale study of chemically enhanced primary treatment in Brazil". Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/81541.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Billersjö, Sofia. "In-situ remediation of benzene-contaminated groundwater – A bench-scale study". Thesis, KTH, Mark- och vattenteknik (flyttat 20130630), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-171834.

Testo completo

Abstract (sommario):

During the construction of the new urban area in the north-eastern part of Stockholm, Stockholm Royal Seaport, groundwater with extremely elevated levels of the carcinogenic aromatic hydrocarbon benzene was discovered in the area Hjorthagen. Such a contamination can be remediated in-situ by the use of chemical oxidation and biodegradation. Due to the fact that many factors such as contaminant composition, groundwater characteristics and temperature vary between sites, smaller bench scale studies are usually conducted before the full scale remediation on site. Little published research exists on the ability of these remediation techniques in areas with lower groundwater temperature such as Stockholm, why the need of a bench-scale study in this case is even larger. The objective of this master thesis is to, out of three investigated remediation agents, find the most suitable one for remediation of the benzene-contaminated groundwater in Hjorthagen. This was made in the form of a bench-scale study and the techniques studied were chemical oxidation, for which the two agents hydrogen peroxide (uncatalyzed and catalyzed in the form of Fenton’s reagent) and persulfate (activated with iron (II)) were used, and biological degradation by the use of a calcium peroxide-based compound. The study showed that the benzene-contaminated groundwater was best remediated with Fenton’s reagent, which was able to degrade the benzene with great success.

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Crone, Brian C. "Bench Scale Study for Oxygen Uptake and Anaerobic Digestion of Industrial Wastewater". University of Cincinnati / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1342728563.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Shipton, David Edward Charles. "Sitting on the bench : an exploratory study into Inland Revenue's industry benchmarking programme". Thesis, University of Canterbury. Accounting and Information Systems, 2015. http://hdl.handle.net/10092/10846.

Testo completo

Abstract (sommario):

The Inland Revenue Department (Inland Revenue) launched the Industry Benchmarking Programme (Benchmarking Programme) in 2011; which closely followed the Small Business Benchmarking Programme (SBBP) which was released by the Australian Taxation Office (ATO) in 2009. These programmes took data from tax returns and other sources, and turn this into a series of financial benchmarks for specific industries. The data from these programmes was then published on the respective websites of Inland Revenue and the ATO. It was envisaged by both tax administrations that this data would be used by taxpayers to benchmark their financial performance against others in their industry. The Benchmarking Programme was designed to assist Inland Revenue with its compliance strategy and to better its their audits. This exploratory research was mainly focused on the use (or lack of) of Inland Revenue’s Benchmarking Programme by taxpayers and tax practitioners. Other aspects of the Benchmarking Programme were investigated. Interviews with six tax practitioners were conducted, supplemented by documentary analysis of the Benchmarking Programme and other sources of data. It was found that the tax practitioners do not use the data for several reasons, including issues with the integrity of the data and its usefulness. It suggested that taxpayers do not use the data from the Benchmarking Programme, and indeed may not have any knowledge of it. The overall impact of the Benchmarking Programme was deemed to be minimal. Several recommendations were to be presented for consideration by Inland Revenue as a result of the findings in the project.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

McCullough, Sharon Gail. "Manitoba Court of Queen's Bench in Equity, 1872-1895, a study in legal administration and records". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ53186.pdf.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Morris, Kelsey A. Morris. "A soy product case study: Taking a functional food from the bench top to the clinic". The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1534510603861387.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Tam, James Ping-Cheong. "A bench scale experimental study of the treatment of milking centre effluent using a sequencing batch reactor". Thesis, University of British Columbia, 1985. http://hdl.handle.net/2429/25140.

Testo completo

Abstract (sommario):

Until recently, the management of milking parlour effluent has received very little attention. The wastewater produced by milking operations comprises mainly milk solids and manure and can impose environmental threats to nearby water bodies if not properly treated before disposal. In this study, three bench-scale Sequencing Batch Biological Reactors were used to treat the UBC dairy barn milking centre wastewater. The experiment was designed to investigate the treatment efficiency of the reactors under different operating temperatures and different numbers of cycles employed per unit daily flow (for the same hydraulic retention time). Parameters studied included BOD₅, COD, Total Suspended Solids, NH₃-N, N0₂-NO₃-N and dissolved oxygen uptake. It was concluded that very high and consistent treatment efficiency can be achieved by using a Sequencing Batch Biological Reactor to treat milking centre wastes. Over 90% BOD₅ removal was observed in the room temperature and 30°C reactors. Even in low operating temperatures of 3.7 and 10.5°C, over 70% BOD₅ removal was attained. Removal of the other pollutional parameters studied was similarly excellent. Uncontrolled denitrification also occured to various degrees in all three reactors. It was also concluded that within the range studied in this experiment (4 to 8 cycles per day), changing the number of cycles employed per unit daily flow did not have any significant effect on the treatment efficiency of the reactors.
Applied Science, Faculty of
Chemical and Biological Engineering, Department of
Graduate

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Clark, William D. "A Bench Top Study of the Optimization of LVAD Cannula Implantation to Reduce Risk of Cerebral Embolism". Master's thesis, University of Central Florida, 2012. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5168.

Testo completo

Abstract (sommario):

Physical bench top experiments are performed to validate and complement ongoing computational fluid dynamics (CFD) analyses of ventricular assist device (VAD) circulation. VADs are used in patients whose hearts do not function to their maximum potential due advanced stages of heart disease and, consequently, are unable to adequately supply blood to the systemic circulation. VADs are commonly utilized as a bridge-to-transplantation, meaning that they are implanted in patients while waiting for a heart transplant. In such cases of long term utilization of VADs, it has been reported in the literatures that thrombo-embolic cerebral events occur in 14-47% of patients over the period of 6 to 12 months. This is a result of thrombus forming despite the use of anticoagulants and advances in VAD design. Accepting current rates of thrombo-embolisms, the main objective of the project is to identify and propose an optimal surgical cannula implantation orientation aimed at reducing the rate of thrombi reaching the carotid and vertebral arteries and thus reduce the morbidity and mortality rate associated with the long term use of VADs to patients suffering from advanced heart failure. The main focus of the experiment is on the physical aspect using a synthetic anatomically correct model constructed by rapid prototyping of the human aortic arch and surrounding vessels. Three VAD cannula implantation configurations are studied with and without bypass to the left carotid artery or to the Innominate artery with ligation of the branch vessel at its root. A mixture of water and glycerin serves to match blood viscosity measured with a rotating cone-plate viscometer. The Reynolds number in the ascending aorta is matched in the flow model. A closed loop mock circulatory system is then realized. In order to match the Reynolds number in the ascending aorta and LVAD cannula with that of the CFD model, a volumetric flow rate of 2.7 liters per minute is supplied through the synthetic VAD cannula and 0.9 liter per minute is supplied to the ascending aorta. Flow rates are measured using rotary flow meters and a pressure sensor is used to ensure a mean operating pressure of 100 mmHg is maintained. Synthetic acrylic blood clots are injected at the inlet of the VAD cannula and they are captured and counted at the vertebral and carotid arteries. The sizes of the thrombi simulated are 2, 3.5 and 5 mm which are typical of the range of diameters encountered in practice. Nearly 300 particles are released over 5 separate runs for each diameter, and overall embolization rates as well as individual embolization rates are evaluated along with associated confidence levels. The experimental results show consistency between CFD and experiment. Means comparison of thromboembolization rates predicted by CFD and bench-top results using a Z-score statistic with a 95% confidence level results in 22 of 24 cases being statistically equal. This study provides confidence in the predictive capabilities of the bench-top model as a methodology that can be utilized in upcoming studies utilizing patient-specific aortic bed model.
ID: 031001578; System requirements: World Wide Web browser and PDF reader.; Mode of access: World Wide Web.; Title from PDF title page (viewed August 26, 2013).; Thesis (M.S.M.E.)--University of Central Florida, 2012.; Includes bibliographical references (p. 81-83).
M.S.M.E.
Masters
Mechanical and Aerospace Engineering
Engineering and Computer Science
Mechanical Engineering; Thermofluids

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Bench study"

1

Berman, Boris. Notes from the pianist's bench. New Haven: Yale University Press, 2000.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Berman, Boris. Notes from the pianist's bench. New Haven: Yale University Press, 2000.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Lewis, S. M. Bench aids for the morphological diagnosis of anaemia. Geneva: World Health Organization, 2001.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Molayem, Benjamin. Dewatering wastewater treatment sludge by clathrate freezing: A bench-scale feasibility study. Cincinnati, OH: U.S. Environmental Protection Agency, Water Engineering Research Laboratory, 1987.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Klami, Hannu Tapani. Lawyers and laymen on the bench: A study of comparative legal sociology. Helsinki: Suomalainen Tiedeakatemia, 1992.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Group, WESTARC. Research project: "Provincial Court Criminal Division) & Court of Queen's Bench" time study : final report. Brandon, Man: The Group, 1990.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Shanks, D. E. Ten-cycle bench-scale study of simplified clay-hydrogen chloride process for alumina production. [Washington, D.C.?]: U.S. Dept. of the Interior, Bureau of Mines, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Shanks, D. E. Ten-cycle bench-scale study of simplified clay-hydrogen chloride process for alumina production. [Washington, D.C.?]: U.S. Dept. of the Interior, Bureau of Mines, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Shanks, D. E. Ten-cycle bench-scale study of simplified clay-hydrogen chloride process for alumina production. [Washington, D.C.?]: U.S. Dept. of the Interior, Bureau of Mines, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Shanks, D. E. Ten-cycle bench-scale study of simplified clay-hydrogen chloride process for alumina production. [Washington, D.C.?]: U.S. Dept. of the Interior, Bureau of Mines, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Bench study"

1

Liu, Zhenhuan, Bingxu Jin e Yong Zhao. "Clinical and Experimental Study on Acupuncture for Children with Cerebral Palsy". In Advanced Acupuncture Research: From Bench to Bedside, 593–618. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-96221-0_21.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Fredj, Mohamed, Abdallah Hafsaoui, Youcef Khadri, Boukarm Riadh, Radouane Nakache, Abderrazak Saadoun e Kamel Menacer. "Study of Bench Stability in the Phosphate Mine (Algeria)". In Engineering Geology and Geological Engineering for Sustainable Use of the Earth’s Resources, Urbanization and Infrastructure Protection from Geohazards, 101–14. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-61648-3_7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Huang, Hsin-Hsiung, e Qi Liu. "Bench-Scale Chemical Treatability Study of the Berkeley Pit Water". In Emerging Technologies in Hazardous Waste Management V, 196–209. Washington, DC: American Chemical Society, 1995. http://dx.doi.org/10.1021/bk-1995-0607.ch016.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Song, Haixu, Shangdong Yang, Yi Zhu e Menghan Li. "Study About Bench-Marking Based on Index Properties in Power Enterprises". In Proceedings of the Third International Forum on Decision Sciences, 49–57. Singapore: Springer Singapore, 2015. http://dx.doi.org/10.1007/978-981-10-0209-0_5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Gong, Zhiqun, Hongyu Guo, Helin Fu, Yibo Zhao e Zetong Peng. "Study on Selection of Excavation Methods and Spacing Distance for Ultra-shallow-Buried and River-Crossing Tunnel with Small Clearance". In Lecture Notes in Civil Engineering, 261–72. Singapore: Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4355-1_25.

Testo completo

Abstract (sommario):

AbstractFor the mined land section of the river-crossing tunnel with small clearance, the study should be carried out for excavation method and safe spacing before the tunnel construction, for engineering properties of surrounding rock is poor and the distance between two tunnel tubes is small. In this paper, in combination with the mined land section works of the river-crossing tunnel on Rongjiang Fourth Road, the finite difference numerical simulation software was adopted to calculate mechanical behaviors of three construction methods: three-bench method, CD method and CRD method under different excavation spacing (10 m, 20 m, 30 m and 40 m) on the basis of grouting and pre-reinforcement of surrounding rock in the early stage. The calculation results indicate that vault displacement and ground settlement can notmeet the specification requirements when the three-bench method is adopted for construction, even if the excavation spacing between the former and latter tunnels is 40m; When the CD method is adopted for construction, vault displacement and ground settlement meet the specification requirements when the excavation spacing between the former and latter tunnels is 40m; When the CRD method is adopted for construction, vault displacement and ground settlement meet the specification requirements when the excavation spacing between the former and latter tunnels is 30m; The control effect of initial support deformation and surrounding rock displacement is in the following sequence: CRD method > CD method > three-bench method. Considering various factors, it is found that the CD method is more reasonable and efficient. Therefore, the CD method is recommended for tunnel excavation and the tunnelling spacing should be controlled to 40m.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Lorier, T. H., D. H. Miller, J. R. Harbour, CA Langton e W. L. Mhyre. "Grout Formulations for Closing Hanford High-Level Waste Tanks - Bench-Scale Study". In Ceramic Transactions Series, 253–60. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118408438.ch25.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Tian, Ying, Zhenhua Jing, Keli Wang, Shengfang Nie e Qingchun Lu. "Study on the Control of AC Dynamometer System for Hybrid Electrical Vehicle Test Bench". In LTLGB 2012, 277–82. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-34651-4_41.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Rong, Bing, Zhengwen Tan, Pan Xiao, Yuanyuan Ma, Jianwen Zhou e Chaojie Liu. "Study on the Program Load Spectrum of the Suspension Fatigue Bench Test and Correlation". In Lecture Notes in Electrical Engineering, 511–22. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3527-2_43.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Villalba-Herreros, A., R. d'Amore-Domenech, V. L. Meca, T. J. Leo e D. Díaz-Cuenca. "Test bench for the study of CO2 storage using physical adsorption for AIP systems". In Advances in Maritime Technology and Engineering, 499–505. London: CRC Press, 2024. http://dx.doi.org/10.1201/9781003508779-54.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Yao, Guang, e Bin Liu. "Study on mechanical behavior of large section tunnel with three-bench-seven-step excavation method". In Advances in Frontier Research on Engineering Structures Volume 1, 476–81. London: CRC Press, 2023. http://dx.doi.org/10.1201/9781003336631-75.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Bench study"

1

Yarascavitch, J., e F. J. Belda. "NIV bench study: performance of nine ventilators". In ERS Respiratory Failure and Mechanical Ventilation Conference 2022 abstracts. European Respiratory Society, 2022. http://dx.doi.org/10.1183/23120541.rfmvc-2022.15.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Najmi, Hussain, Eddy El Tabach, Khaled Chetehouna, Nicolas Gascoin, Ludovic Lamoot e Francois H. Falempin. "Permselectivity Bench to Study Permation Along Porous Tube". In 21st AIAA International Space Planes and Hypersonics Technologies Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2017. http://dx.doi.org/10.2514/6.2017-2212.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Fan, J. Y., e Hugh A. Spikes. "New Bench Test to Study Mild Lubricated Wear". In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64398.

Testo completo

Abstract (sommario):

This extended abstract describes a new bench test for measuring and studying mild, lubricated wear. The method combines MTM, which is able to produce contra-rotation so as to obtain high sliding speed while retaining low entrainment speed and thus boundary lubrication conditions, with ICP which is employed to analyze trace levels of iron in lubricants so as to monitor mild wear throughout a test.

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Rossi, J. O., F. S. Yamasaki, A. F. Teixeira, E. G. L. Rangel, A. F. G. Greco, J. J. Barroso, L. P. S. Neto e E. Schamiloglu. "Operation Study of a Bench Compact Gyromagnetic NLTL". In 2021 IEEE Pulsed Power Conference (PPC). IEEE, 2021. http://dx.doi.org/10.1109/ppc40517.2021.9733142.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Hou, Peter W., Thomas W. Nichols, Keith T. Miller e Joshua J. Bennett. "A Bench Test Study of Port Fuel Injection Fouling". In 2008 SAE International Powertrains, Fuels and Lubricants Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2008. http://dx.doi.org/10.4271/2008-01-1593.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Marahatta, Ram C., e Christopher G. Schmit. "Bench-Scale Study of Biological Phosphorus Removal from Municipal Wastewater". In National Conference on Environmental and Pipeline Engineering. Reston, VA: American Society of Civil Engineers, 2000. http://dx.doi.org/10.1061/40507(282)54.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Hassanikhah, Arash, e Gerald A. Miller. "Bench-Scale Study of Desiccation Crack Development in Clayey Soil". In Second Pan-American Conference on Unsaturated Soils. Reston, VA: American Society of Civil Engineers, 2018. http://dx.doi.org/10.1061/9780784481707.002.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Tunes, Gabriela, André Leão, José Piva, Paulo Silva, Josevaldo Fernandez, Giuliano Bettiol e Rafael Bertholo Eaton. "Accelerated Durability Bench Test and Risk Assessment: A Case Study". In 2020 SAE Brasil Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2021. http://dx.doi.org/10.4271/2020-36-0156.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Xu, Shanzhen, e Cheng Wang. "Study on vehicle magnetic particle clutch control and bench test". In Education (ICCSE 2011). IEEE, 2011. http://dx.doi.org/10.1109/iccse.2011.6028786.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Rassolkin, Anton, e Valery Vodovozov. "A test bench to study propulsion drives of electric vehicles". In 2013 International Conference on Compatibility and Power Electronics (CPE). IEEE, 2013. http://dx.doi.org/10.1109/cpe.2013.6601169.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Bench study"

1

Cozzi, A., e E. Hansen. BENCH SCALE SALTSTONE PROCESS DEVELOPMENT MIXING STUDY. Office of Scientific and Technical Information (OSTI), agosto 2011. http://dx.doi.org/10.2172/1025519.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Peyton, B. M., e K. R. Martin. 100 Area groundwater biodenitrification bench-scale treatability study procedures. Office of Scientific and Technical Information (OSTI), maggio 1993. http://dx.doi.org/10.2172/10157653.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Jha, M. C., e R. L. McCormick. Task 3 -- Bench-scale char upgrading and utilization study. Office of Scientific and Technical Information (OSTI), agosto 1989. http://dx.doi.org/10.2172/650138.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Gary Blythe, John Currie e David DeBerry. Bench-scale Kinetics Study of Mercury Reactions in FGD Liquors. Office of Scientific and Technical Information (OSTI), marzo 2008. http://dx.doi.org/10.2172/950472.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Hansen, E., T. Timothy Jones, T. Tommy Edwards e A. Alex Cozzi. WASTE SOLIDIFICATION BUILDING BENCH SCALE HIGH ACTIVITY WASTE SIMULANT VARIABILITY STUDY FY2008. Office of Scientific and Technical Information (OSTI), marzo 2009. http://dx.doi.org/10.2172/952437.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Gering, K. L. Treatability study for the bench-scale solidification of nonincinerable LDR low-level mixed waste. Office of Scientific and Technical Information (OSTI), gennaio 1993. http://dx.doi.org/10.2172/10150146.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Gering, K. Treatability study for the bench-scale solidification of nonincinerable LDR low-level mixed waste. Office of Scientific and Technical Information (OSTI), gennaio 1993. http://dx.doi.org/10.2172/6556673.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Campobasso, Marissa, Musa Ibrahim, Amanda Chisholm, Julia Miazek e Martin Page. pH pivoting for algae coagulation : bench-scale experimentation. Engineer Research and Development Center (U.S.), maggio 2024. http://dx.doi.org/10.21079/11681/48611.

Testo completo

Abstract (sommario):

Harmful algal blooms (HABs) threaten recreational waters and public supplies across the US, causing detrimental economic and environmental effects to communities. HABs can be mitigated with dissolved air flotation (DAF) treatment, which requires addition of pH-sensitive charged chemicals to neutralize algae, allowing them to attach to microbubbles and float to the surface. During HAB events and photosynthesis, algae raise the pH to levels that are not ideal for DAF. Traditionally, pH is reduced with a strong acid; however, this adds operational cost and permanently adjusts the water’s pH. This study assessed an approach that might allow for infusing CO₂ from diesel-powered electricity generators into the water prior to DAF treatment. It was hypothesized that formation of carbonic acid could temporarily reduce the pH. Results showed that 2.5%–5.0% CO₂ mixed within compressed air can achieve pH levels between 6–7 in algal water with an initial pH of 9–11 and alkalinity of 150 mg/L as CaCO₃. Further, dosing CO₂ before chemical addition yielded a 31% improvement in water clarification. Returning the pH back to natural levels was not achieved using ambient air microbubbles; however, coarse bubble air spargers should be tested to provide more volumetric capacity for CO₂ absorption.

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Fox, Don, Rick Demmer e Stephen Reese. Bench Scale Study of Coating Formulations for Abatement of Mercury Vapor and Recovery of Mercury Spills. Office of Scientific and Technical Information (OSTI), febbraio 2018. http://dx.doi.org/10.2172/1467409.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Carty, R. H., M. Onischak, S. P. Babu, R. A. Knight, J. M. Wootten e R. G. Duthie. Mild gasification technology development process: Task 3, Bench-scale char upgrading study, February 1988--November 1990. Office of Scientific and Technical Information (OSTI), dicembre 1990. http://dx.doi.org/10.2172/5919683.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!