Tesi sul tema "Ben cao"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Ben cao".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.
Chaudhari, Sachin B. "DEVELOPMENT OF AN INTERNET-BASED ANALYSIS TOOL USING THE BOUNDARY ELEMENT METHOD". University of Cincinnati / OhioLINK, 2000. http://rave.ohiolink.edu/etdc/view?acc_num=ucin971963697.
Testo completoChampagne, Scott. "Steam Enhanced Calcination for CO2 Capture with CaO". Thèse, Université d'Ottawa / University of Ottawa, 2014. http://hdl.handle.net/10393/30905.
Testo completoWong, Francis Seung Yin. "Case-based reasoning for computer-aided inspection process planning /". access full-text access abstract and table of contents, 2005. http://libweb.cityu.edu.hk/cgi-bin/ezdb/thesis.pl?phd-meem-b19887656a.pdf.
Testo completo"Submitted to Department of Manufacturing Engineering and Engineering Management in partial fulfillment of the requirements for the degree of Doctor of Philosophy." Includes bibliographical references (leaves 164-175).
Fürst, Eva-Maria. "Untersuchungen zur Passgenauigkeit von CAD/CAM-gefrästen Zirkonoxid-Einzelkronengerüsten bei unterschiedlichem Präparationswinkel". Diss., lmu, 2008. http://nbn-resolving.de/urn:nbn:de:bvb:19-88453.
Testo completoFürst, Eva-Maria. "Untersuchungen zur Passgenauigkeit von CAD/CAM-gefrästen Zirkonoxid-Einzelkronengerüsten bei unterschiedlichem Präparationswinkel". kostenfrei, 2008. http://edoc.ub.uni-muenchen.de/8845/.
Testo completoMaile, Annette. "Analyse von OODBMS für die technische Modellierung". [S.l.] : Universität Stuttgart , Fakultät Informatik, 1995. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB6783587.
Testo completoSelbeck, Birgit. "In-vitro-Bruchfestigkeit und Randqualität von CAD/CAM gefertigten Zirkoniumdioxid-Brücken /". Regensburg, 2007. http://opac.nebis.ch/cgi-bin/showAbstract.pl?sys=000253193.
Testo completoKrzywinski, Sybille. "Verbindung von Design und Konstruktion in der textilen Konfektion unter Anwendung von CAE". Dresden TUDpress, 2005. http://deposit.ddb.de/cgi-bin/dokserv?id=2671904&prov=M&dok_var=1&dok_ext=htm.
Testo completoScherer, Philipp. "Die Rekonstruktion kraniofazialer Knochendefekte mit CAD/CAM-gefertigten Titanimplantaten eine retrospektive Studie /". [S.l.] : [s.n.], 2004. http://deposit.ddb.de/cgi-bin/dokserv?idn=976464748.
Testo completode, Fluiter Travis. "Design of lightweigh electric vehicles". The University of Waikato, 2008. http://hdl.handle.net/10289/2438.
Testo completoBerthold, Axel. "Der fertigungsorientierte Modellierer FERMOD als Erweiterung des Konstruktionssystems WISKON". Kassel : Kassel Univ. Press, 2002. http://deposit.d-nb.de/cgi-bin/dokserv?idn=968716830.
Testo completoPietzka, Sebastian [Verfasser]. "Präzision der Oberkieferverlagerung bei bignathen Umstellungsosteotomien unter Verwendung von CAD/CAM Splinten und temporärer Unterkieferfixation / Sebastian Pietzka". Ulm : Universität Ulm, 2020. http://d-nb.info/1217328262/34.
Testo completoPevehouse, James Melvin. "Landmark Baptists ecclesiology can affect soteriology /". Theological Research Exchange Network (TREN) Access this title online, 2005. http://www.tren.com.
Testo completoMarbun, Bonar. "Kinetik der Hydratation von CaO und MgO". [S.l.] : [s.n.], 2006. http://deposit.ddb.de/cgi-bin/dokserv?idn=979684390.
Testo completoQuinger, Dominique. "Mercedes-Benz symphony". Thesis, Umeå universitet, Designhögskolan vid Umeå universitet, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-125875.
Testo completoSchmeißer, Johannes Klaus Lothar [Verfasser], e Bogna [Akademischer Betreuer] Stawarczyk. "Abrasionsbeständigkeit verschiedener CAD/CAM-Hochleistungskunststoffe bei künstlicher Alterung in einem Kausimulator / Johannes Klaus Lothar Schmeißer. Betreuer: Bogna Stawarczyk". München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2016. http://d-nb.info/1112943072/34.
Testo completoPardo, Pierre. "Développement d’un procédé de stockage d’énergie thermique haute température par voie thermochimique". Phd thesis, Toulouse, INPT, 2013. http://oatao.univ-toulouse.fr/11230/1/pardo_partie_1_sur_2.pdf.
Testo completoSchäfer, Helena [Verfasser], e Karl-Heinz [Akademischer Betreuer] Kunzelmann. "Experimentelle In-vitro Studie zum Ermüdungsverhalten CAD/CAM-gefertigter Kauflächenveneers bei reduzierter Materialstärke / Helena Schäfer. Betreuer: Karl-Heinz Kunzelmann". München : Universitätsbibliothek der Ludwig-Maximilians-Universität, 2014. http://d-nb.info/1076471943/34.
Testo completoMatsumoto, Eric Eiji. "Development of a precast bent cap system /". Full text (PDF) from UMI/Dissertation Abstracts International, 2000. http://wwwlib.umi.com/cr/utexas/fullcit?p3004334.
Testo completoAubele, André Carsten. "Phasengleichgewichte im System Bi 2 O 3 -PbO-SrO-CaO-CuO-Ag". [S.l. : s.n.], 2002. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB9831639.
Testo completoStünkel, Robert [Verfasser]. "Vergleich der Übertragungsgenauigkeit der intraoralen Real-time-Navigation mit der statischen, CAD/CAM gefertigten Pilotbohrschablone bei der Insertion dentaler Implantate in vitro / Robert Stünkel". Göttingen : Niedersächsische Staats- und Universitätsbibliothek Göttingen, 2021. http://nbn-resolving.de/urn:nbn:de:gbv:7-21.11130/00-1735-0000-0008-58E1-7-1.
Testo completoCastilho, Guilherme José de 1983. "Análise de caos em leito fluidizado circulante". [s.n.], 2011. http://repositorio.unicamp.br/jspui/handle/REPOSIP/266909.
Testo completoTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Química
Made available in DSpace on 2018-08-18T08:24:24Z (GMT). No. of bitstreams: 1 Castilho_GuilhermeJosede_D.pdf: 4727634 bytes, checksum: 262e7551887344a4d33739e6ac52ca97 (MD5) Previous issue date: 2011
Resumo: Stringer (1989) sugeriu que um leito fluidizado gás-sólido pode ser um sistema caótico no qual seu comportamento irregular, entretanto determinístico, é causado por suas propriedades não-lineares. Desde então, surgiu uma nova forma de analisar flutuações de sinais em sistemas fluidizados: a análise não linear de séries temporais, comumente referida como análise de caos. A análise de caos é uma técnica muito utilizada no processamento de sinais em sistemas fluidizados, porém pouco difundida a nível nacional. Este tipo de análise baseia-se na reconstrução de atratores imersos em um espaço de fase e no estudo das propriedades deste atrator. Nesta Tese de Doutorado, avalia-se o comportamento fluidodinâmico em leito fluidizado circulante (LFC) operando sob condição de transporte pneumático diluído utilizando a análise de caos e também outras análises no domínio do tempo, como a distribuição de frequência e desvio médio absoluto. Os sinais avaliados foram obtidos por uma sonda de fibras ópticas, gerando séries temporais de flutuação de sinais elétricos que representam concentração de sólidos. A análise de caos demonstrou que os sistemas estudados apresentam comportamento caótico, por apresentar entropia de Kolmogorov positiva para todas as situações. A vantagem deste tipo de análise em comparação com as ferramentas usuais no domínio do tempo e no domínio da frequência (espectro de Fourier) é que a mesma considera o comportamento não-linear que existe neste tipo de reator multifásico. A partir de seus resultados, pôde-se descrever detalhadamente a fluidodinâmica do LFC, permitindo relacionar os parâmetros encontrados com fenômenos físicos como formação e repartição de clusters, turbulência do gás, interações partícula-partícula e partícula-parede e má alimentação. Tal análise permitiu, inclusive, a identificação de três regimes distintos: diluído, resultante de um escoamento mais complexo devido à turbulência da fase gasosa; concentrado, onde a presença de clusters diminui o caminho médio das partículas e por conseqüência reduz o grau de complexidade do sistema; e um terceiro regime ainda não publicado em trabalhos anteriores, referente às condições extremamente diluídas, onde o aumento do fluxo de sólidos provocou o aumento da complexidade. Neste regime, a fase gasosa predomina e o escoamento é mais previsível quando há presença de poucas partículas. Pretende-se, com esta Tese de Doutorado, incentivar a utilização deste método para, pelo menos, servir como complementação da técnica usualmente utilizada na análise de sinais nesta área de pesquisa, que são os espectros de potência de Fourier
Abstract: Stringer (1989) was the first to suggest that a gas-solid fluidized bed may be a chaotic system, in which the irregular, yet deterministic, behavior is caused by its nonlinear properties. Since then, another way to analyze signals fluctuations in fluidized systems came to light: the nonlinear time series analysis commonly referred to as chaos analysis. It is a technique widely used in the signal analysis in fluidized systems, but not very common at national level. This type of analysis is based on the reconstruction of attractors embedded in a phase space and the study of the properties of this attractor. This Ph.D. Thesis evaluates the fluid dynamic behavior of circulating fluidized bed (CFB) operating under conditions of dilute pneumatic conveying using chaos analysis of chaos and also further analysis in the time domain. The signals obtained were measured by an optical fiber probe which generated time series of fluctuating electrical signals representing solids concentration. The chaos analysis showed that the systems studied exhibit chaotic behavior, by having positive Kolmogorov entropy for all situations. The advantage of this type of analysis compared with the usual tools in the time domain and frequency domain (Fourier spectrum) is that it considers the nonlinear behavior that exists in this type of multiphase reactor. From their results, it was possible to describe in detail the fluid dynamics of the CFB, allowing correlating the parameters found with physical phenomena such as cluster formation and breakdown, the gas turbulence, particle-particle and particle-wall interactions and feed maldistribution. This analysis has led to the identification of three distinct regimes: diluted, resulted from a more complex flow due to turbulence of the gas phase; concentrated, where the presence of clusters decreases the average path length of particles and consequently reduces the complexity of the system; and a third regime not yet published in previous works, regarding the extremely dilute conditions, where the increased flow of solids caused the increase in complexity. In this condition, the gas phase and the predominant flow is more predictable when there is presence of a few particles. With this Ph.D. Thesis, it is intended to encourage the use of this method for at least as a complement to the technique usually used in signal analysis in this research area, that is, the Fourier power spectra
Doutorado
Engenharia de Processos
Doutor em Engenharia Química
Liberali, Neto Guilherme. "O efeito da evolução das preferências dos consumidores sobre o preço e a qualidade ótimos para bens duráveis". reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2006. http://hdl.handle.net/10183/5932.
Testo completoWende, Verena. "Beeinflussung spannungsabhängiger Ca2+-Kanäle bei Blutegel-Neuronen durch extrazelluläre Osmolarität, pH-Wert und Ca2+-Konzentration". [S.l. : s.n.], 2004. http://deposit.ddb.de/cgi-bin/dokserv?idn=971952221.
Testo completoKöhler, Peter, e Marcin Humpa. "Geometrische Umsetzung von Designabsichten bei der Produktmodellierung". Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-228356.
Testo completoKoob, Robert. "Massenspektrometrische Methode zur Bestimmung der 13C-Einbaurate und -position in Äpfelsäure bei der CO2-Aufnahme von CAM-Pflanzen". [S.l. : s.n.], 2000. http://elib.tu-darmstadt.de/diss/000137.
Testo completoCamprubí, Estebo Natalia. "Design and analysis in shape optimization of shells". [S.l. : s.n.], 2004. http://deposit.ddb.de/cgi-bin/dokserv?idn=972764135.
Testo completoHaase, Andreas. "Untersuchungen zur Kinetik des Ca2+-aktivierten Chloridkanals und des Na+-Ca2+-Austauschers". [S.l. : s.n.], 2003. http://deposit.ddb.de/cgi-bin/dokserv?idn=968360688.
Testo completoNienaber, Sara. "Invisible Scourge: What Bed Bugs and Propoxur Can Teach Us About Health and the Urban Environment". Thesis, University of Oregon, 2014. http://hdl.handle.net/1794/17896.
Testo completoKöhler, Peter, e Marcin Humpa. "Geometrische Umsetzung von Designabsichten bei der Produktmodellierung". TUDpress - Verlag der Wissenschaften GmbH, 2012. https://tud.qucosa.de/id/qucosa%3A30511.
Testo completoAlbach, Gerald. "Die Bedeutung tonoplastenständiger Ca2+-Transporter für die zytoplasmatische Signalübertragung und Ca2+-Homöostase bei Zea-mays-L.-Koleoptilen". [S.l. : s.n.], 1999. http://deposit.ddb.de/cgi-bin/dokserv?idn=961991968.
Testo completoYao, Tong. "Die Vielfältigkeit der Literatur : ein Vergleich zwischen den "Wahlverwandtschaften" von Johann Wolfgang von Goethe mit dem klassischen chinesischen Roman "Der Traum der roten Kammer" von Cao Xueqin und Gao E /". Berlin : Logos-Verl, 2006. http://deposit.d-nb.de/cgi-bin/dokserv?id=2861582&prov=M&dok_var=1&dok_ext=htm.
Testo completoAkbarian, Ali M. "Prototypische Realisierung eines Software-Baukastens zum interaktiven Entwerfen verfahrenstechnischer Anlagen und Prozesse". [S.l.] : Universität Stuttgart , Fakultät Informatik, 1995. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB6783632.
Testo completoHoleczek, Adam Mack Joachim. "Prototypische Entwicklung eines ECAD-Variantenmoduls". [S.l. : s.n.], 2002. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB10277665.
Testo completoMack, Joachim. "Realisierungskonzept für die Implementierung eines Software-Prototypen fuer ein ECAD Variantenmodul". [S.l. : s.n.], 2002. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB9866641.
Testo completoJammrath, Jennifer. "Funktionelle Analyse von CAP bei der Herzlumenbildung von Drosophila melanogaster". Doctoral thesis, Humboldt-Universität zu Berlin, Lebenswissenschaftliche Fakultät, 2016. http://dx.doi.org/10.18452/17414.
Testo completoThe heart of Drosophila provides a valuable model system for the examination of the genetic and molecular mechanisms that guide cardiogenesis. A key event of cardiogenesis is the formation of a heart lumen through which the hemolymph is pumped to circulate nutrients and cells of the innate immune system. A main focus of my work was the identification of new genes that are expressed in the embryonic heart of Drosophila. Therefore I studied the expression of 101 genes, whose orthologues are expressed specifically in the heart of zebrafish. I identified a gene that encodes for the Cbl-associated protein (CAP). By generating an anti-CAP antibody I could describe the localization of the CAP protein in the heart for the first time in detail. Interestingly, it turned out that CAP is located similar to the homologous vertebrate proteins at the focal adhesion contacts of cardioblasts in the embryo and at the Z-discs and the cell-cell contact sites of cardiomyocytes in the adult heart. I also examined the consequences of the loss of CAP function on heart development. For the analysis of the CAP mutants I used immunohistochemical and ultrastructural analysis by TEM microscopy. So I was able to demonstrate that embryonic hearts of CAP mutants show a defective number and arrangement of cardioblasts and lumen defects. A genetic interaction test substantiated my guess that CAP interacts with the Integrin signaling pathway during embryonic heart development. Live recordings of the pumping heart of Drosophila L3 larvae and injection tests of late pupae also showed that the loss of CAP function leads to severe defects in the functionality of the larval and adult heart.
Ruppert, Heiko. "CAD-integrierte Zuverlässigkeitsanalyse und -optimierung". [S.l. : s.n.], 2002. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB10316301.
Testo completoOliveira, Lucas. "CAN YOU SEE THE BEE? : COOPERATING WITH THE DEVELOPMENT OF NATIVE BEE AWARENESS IN BRAZIL". Thesis, Linnéuniversitetet, Institutionen för design (DE), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-106639.
Testo completoWillhalm, Thomas. "Methoden der Diskreten Mathematik bei der Rekonstruktion der Topologie eines CAD-Datenmodells". [S.l. : s.n.], 1998. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB8885107.
Testo completoRottke, Evelin. "ExTraCAD Computerunterstützung des architektonischen Tragwerkentwurfs /". Aachen : RWTH, Fak. für Architektur, 1998. http://deposit.d-nb.de/cgi-bin/dokserv?idn=970716982.
Testo completoMadureira, Joana Isabel Rocha Santos. "Inventário e acondicionamento da colecção de bens móveis do conjunto arqueológico de Carmona". Master's thesis, Instituto Politécnico de Tomar, 2012. http://hdl.handle.net/10400.26/5903.
Testo completoBernotat, Juliane. "Beeinflussung der sarkoplasmatischen Ca2+-ATPase-Aktivität im Herz- und Skelettmuskel durch das Ca2+-bindende Protein S100A1". [S.l.] : [s.n.], 2003. http://deposit.ddb.de/cgi-bin/dokserv?idn=974453048.
Testo completoWiesinger, Peter. "Parametrisierte Experten-CAD-Entwicklungsplattform als Rationalisierungswerkzeug". [S.l.] : [s.n.], 2001. http://deposit.ddb.de/cgi-bin/dokserv?idn=963609475.
Testo completoMahler, Stefan. "Erzeugung und Evaluierung von Oktalbaumstrukturen als Schnittstelle zu CAD-Programmen". [S.l. : s.n.], 2003. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB10519011.
Testo completoKastens, Sabine [Verfasser]. "Pharmakologische Charakterisierung von Ca2+- und motilitätsregulierenden Strukturen bei Eberspermien / Sabine Kastens". Hannover : Bibliothek der Tierärztlichen Hochschule Hannover, 2017. http://d-nb.info/115026487X/34.
Testo completoCao, Jiazhen [Verfasser], e Stefanie [Akademischer Betreuer] Haberzettl. "Raumreferenz im frühkindlichen Zweitspracherwerb. Eine longitudinale Untersuchung bei Kindern mit L1 Chinesisch und L2 Deutsch / Jiazhen Cao ; Betreuer: Stefanie Haberzettl". Saarbrücken : Saarländische Universitäts- und Landesbibliothek, 2020. http://d-nb.info/1203624549/34.
Testo completoPravdová, Lucie. "Uvedení nového výrobku na trh". Master's thesis, Vysoká škola ekonomická v Praze, 2011. http://www.nusl.cz/ntk/nusl-150392.
Testo completoReichert, Johannes. "Methodik zur Verbesserung der Ergebnisqualität bei der IT-gestützten Fabrikplanung im Rahmen der digitalen Fabrik". Aachen Shaker, 2009. http://d-nb.info/1000213870/04.
Testo completoShin, Jin-Wook. "The experimantal and theoretical determination of the thermodynamic properties of melts and glasses from the system CaO-MgO-Al2O3-SiO2". [S.l.] : [s.n.], 2004. http://deposit.ddb.de/cgi-bin/dokserv?idn=975613715.
Testo completoSeitz, Gabriele [Verfasser], e Holger [Akademischer Betreuer] Class. "Modeling fixed-bed reactors for thermochemical heat storage with the reaction system CaO/Ca(OH)2 / Gabriele Seitz ; Betreuer: Holger Class". Stuttgart : Universitätsbibliothek der Universität Stuttgart, 2021. http://d-nb.info/1235402878/34.
Testo completo