Bibliografie tematiche / Automation

Letteratura scientifica selezionata sul tema "Automation"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 29 luglio 2024

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Automation".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Automation"

Canedo, Arquimedes. "Automating automation". Communications of the ACM 63, n. 5 (20 aprile 2020): 23. http://dx.doi.org/10.1145/3391911.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Pietschker, Andrej. "Automating test automation". International Journal on Software Tools for Technology Transfer 10, n. 4 (3 luglio 2008): 291–95. http://dx.doi.org/10.1007/s10009-008-0076-z.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Farrell, Bradley. "The role of the human in an age of automation". APPEA Journal 58, n. 2 (2018): 545. http://dx.doi.org/10.1071/aj17188.

Testo completo

Abstract (sommario):

The liquefied natural gas (LNG) industry in Australia has a very large installed asset base that is highly automated. This paper explores established, emerging and experimental automations that could materially impact human work in existing LNG facilities. The focus is on automations that assist with physical interventions on the built asset. Riley’s method for assessing the level of automation is used on current and emerging automations in the industry. Use cases demonstrate that as automation increases, the primary focus of the human becomes one of system design, monitoring and intervention. The changing role of the human in this age of automaton has important implications for the development of human work skills for the future: with increasing automation, the nature of work will change. In the future (1) field workers need to supervise and maintain robots, (2) functional specialists need to define and debug robot instruction sets, and (3) system designers need to master the opportunities and challenges in an exciting new field: the robot-human-interface.

Gli stili APA, Harvard, Vancouver, ISO e altri

Halabi, Tarek, e Hsiao‐Ming Lu. "Automating checks of plan check automation". Journal of Applied Clinical Medical Physics 15, n. 4 (luglio 2014): 1–8. http://dx.doi.org/10.1120/jacmp.v15i4.4889.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Сайпулаева, К. Р., e У. А. Ирагелова. "Development of accounting automation". Экономика и предпринимательство, n. 7(144) (2 dicembre 2022): 1270–73. http://dx.doi.org/10.34925/eip.2022.144.7.255.

Testo completo

Abstract (sommario):

На сегодняшний день актуальной проблемой является автоматизация бухгалтерского учета. Статья раскрывает сущность необходимости использования в процессе автоматизации бухгалтерского учета современных инновационных технологий. Так же обусловлена неизменная важность в автоматизации системы бухгалтерского учета, первоочедность опыта и профессионализма в различной сложности современных инновационных технологий. Выявлены проблемы, с которыми сталкиваются хозяйствующие субъекты в процессе автоматизации бухгалтерского учет, рассмотрены вопросы автоматизации документооборота и формирование отчетности, достоинства автоматизации бухгалтерского учета и отчетности, при внедрении системы автоматизации учета. To date, the actual problem is the automation of accounting. The article reveals the essence of the need to use modern innovative technologies in the process of accounting automation. It is also due to the continued importance in the automation of the accounting system, the priority of experience and professionalism in the varying complexity of modern innovative technologies. The problems faced by business entities in the process of automating accounting are identified, the issues of automating workflow and reporting, the advantages of automating accounting and reporting, when implementing an accounting automation system, are considered.

Gli stili APA, Harvard, Vancouver, ISO e altri

Yu, Wen Wei, e Xue Tao Wang. "Plate Production Line Automation Control System Based on Automatic Gauge Control". Applied Mechanics and Materials 214 (novembre 2012): 674–78. http://dx.doi.org/10.4028/www.scientific.net/amm.214.674.

Testo completo

Abstract (sommario):

The automation control system to plate production line is developed independently. It has been applied for several plants in China and has a good effect. The whole automaton control system is designed as several levels: basic automation system, process automation system and HMI system. The control functions are realized with these levels. With AGC function in plate mill area basic automation system, the plate thickness accuracy can be guaranteed.

Gli stili APA, Harvard, Vancouver, ISO e altri

Venu, Arjun C. "Analyzing the Impact of AI-Tools on Human Resource Practices". International Journal for Research in Applied Science and Engineering Technology 12, n. 5 (31 maggio 2024): 520–45. http://dx.doi.org/10.22214/ijraset.2024.61604.

Testo completo

Abstract (sommario):

Abstract: The rapid progress of automation technologies has brought about significant transformations in various aspects of modern workplaces, and the Human Resources (HR) department is no exception. The purpose of this thesis is to examine how automation affects employees in the HR field. The research will employ multiple methods to explore this topic. Through this approach, the study aims to contribute to the existing body of knowledge regarding the impact of automation on HR functions and employees, as well as shed light on the implications for HR department employees. The findings from this research are expected to provide valuable insights for HR professionals, organizational leaders, and policymakers, helping them understand the opportunities and challenges that come with adopting automationin HR. This understanding will ultimately assist in making informed decisions and developingstrategic plans to navigate the evolving digital landscape of work. This in-depth analysis explores the profound and diverse impacts of automation on human resource (HR) practices in modern organizational settings. Automation has permeated various aspects of HR management, including recruitment, employee engagement, and compliance, resulting in far-reaching and transformative effects. By utilizing AI algorithms, automation optimizes processes, streamlines recruitment efforts, and expedites onboarding through virtual assistants and electronic documentation. Additionally, it enhances performance management by providing real-time feedback mechanisms and personalized training modules facilitated by learning management systems (LMS) and immersive technologies such as virtual reality (VR) and augmented reality (AR). The integration of automation also revolutionizes data analytics, equipping HR professionals with predictive insights for strategic decision-making and risk mitigation. Despite its undeniable benefits in terms of efficiency and scalability, the rise of automation presents challenges such as job displacement and the need for continuous upskillingof HR professionals. Therefore, a nuanced and strategic approach to implementing automationis crucial, with a focus on balancing its advantages while addressing these challenges.

Gli stili APA, Harvard, Vancouver, ISO e altri

Shull, Emily M., John G. Gaspar, Daniel V. McGehee e Rose Schmitt. "Using Human–Machine Interfaces to Convey Feedback in Automated Driving". Journal of Cognitive Engineering and Decision Making 16, n. 1 (marzo 2022): 29–42. http://dx.doi.org/10.1177/15553434221076827.

Testo completo

Abstract (sommario):

The next decade will see a rapid increase in the prevalence of partial vehicle automation, specifically conditional automation (i.e., SAE level 3; SAE, 2018 ). In conditional automation, the expectation is that the user is still receptive to takeover and can disengage while the automation is active, but as the automation approaches its operational limits, or the end of its operational design domain, it issues a request to intervene and the user is expected to retake control. A human–machine interface (HMI) that can safely and effectively transition control is therefore very important. This simulator study investigated how features of the HMI design, specifically feedback about the confidence (i.e., current capability) of the automation influenced transition of control. Participants were assigned to one of three conditions, which received varying amounts of visual and auditory feedback regarding the automation’s confidence. Findings suggest 3-stage auditory-visual feedback about the automation’s confidence may improve subsequent takeover performance compared to 3-stage visual and a control group without feedback. This research demonstrates the potential value of providing more insight into automated feature performance in conditional automation.

Gli stili APA, Harvard, Vancouver, ISO e altri

Costanzo, Don. "AUTOMATED ICS: A FRAMEWORK FOR SUCCESS". International Oil Spill Conference Proceedings 2001, n. 2 (1 marzo 2001): 1033–34. http://dx.doi.org/10.7901/2169-3358-2001-2-1033.

Testo completo

Abstract (sommario):

ABSTRACT Over the years, many organizations have attempted to automate the Incident Command System (ICS). These attempts have ranged from computerizing T-cards to a nationwide spill operations system. Over time, these systems have had varying degrees of success. While certain inherent reasons exist for not automating ICS, they are outweighed by the tremendous potential of successful automation. The need to produce documentation, the integration of ICS sections, and the rapid change of information all lend themselves to automation. Successful ICS automation does not start with computerizing ICS forms. The hey to automating ICS is to automate both ICS and response processes. In a response effort, many separate and distinct processes occur daily. The requisitioning of resources, the planning and application of the response organization, cost accounting, and the development of an Incident Action Plan (IAP) occur many times during an incident. This paper describes a framework for automating and integrating these processes. This framework offers organizations a road map for successful ICS automation. The poster presentation includes a software demonstration that illustrates the benefits of integrated automation.

Gli stili APA, Harvard, Vancouver, ISO e altri

Bass, Ellen J., Leigh A. Baumgart e Kathryn Klein Shepley. "The Effect of Information Analysis Automation Display Content on Human Judgment Performance in Noisy Environments". Journal of Cognitive Engineering and Decision Making 7, n. 1 (10 agosto 2012): 49–65. http://dx.doi.org/10.1177/1555343412453461.

Testo completo

Abstract (sommario):

Displaying both the strategy that information analysis automation employs to makes its judgments and variability in the task environment may improve human judgment performance, especially in cases where this variability impacts the judgment performance of the information analysis automation. This work investigated the contribution of providing either information analysis automation strategy information, task environment information, or both, on human judgment performance in a domain where noisy sensor data are used by both the human and the information analysis automation to make judgments. In a simplified air traffic conflict prediction experiment, 32 participants made probability of horizontal conflict judgments under different display content conditions. After being exposed to the information analysis automation, judgment achievement significantly improved for all participants as compared to judgments without any of the automation’s information. Participants provided with additional display content pertaining to cue variability in the task environment had significantly higher aided judgment achievement compared to those provided with only the automation’s judgment of a probability of conflict. When designing information analysis automation for environments where the automation’s judgment achievement is impacted by noisy environmental data, it may be beneficial to show additional task environment information to the human judge in order to improve judgment performance.

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Automation"

Svensson, Andreas. "Automatic Generation of Control Code for Flexible Automation". Thesis, Linköpings universitet, Reglerteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-84412.

Testo completo

Abstract (sommario):

In order to quickly adapt the production on a production line to the demand, there is a needfor flexibility. A tool designed for this purpose, p-sop, has been developed at UniversityWest. This thesis deals with implementation of p-sop in a demonstrator, and developmentof a framework for priority policies as well as a graphical user interface to p-sop. The prioritypolicies evaluated in the demonstrator did note give an increased efficiency, and thegraphical user interface is shown to be well suited for the demonstrator and p-sop in general.

Gli stili APA, Harvard, Vancouver, ISO e altri

Trelinski, Michael. "Heijunka Automation". Digital Commons at Loyola Marymount University and Loyola Law School, 2016. https://digitalcommons.lmu.edu/etd/434.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Mengana, Bashar, e Fredrik Raak. "Building Automation". Thesis, KTH, Skolan för elektro- och systemteknik (EES), 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-199263.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gorban, Je S., e L. V. Simonchuk. "Automation systems". Thesis, КНУТД, 2016. https://er.knutd.edu.ua/handle/123456789/5015.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Stutz, Peter. "Office automation". Master's thesis, University of Cape Town, 1989. http://hdl.handle.net/11427/17222.

Testo completo

Abstract (sommario):

Bibliography: p. 100-104.
Office automation systems have become an essential tool for the operation of the modern office. With the emphasis of a modern office being placed on efficiency and ease of communication, office automation systems have become the backbone of successful businesses. COSNET is a prototype office automation system designed and implemented at the Department of the University of Cape Town and runs on Personal Computers that are linked to a NCR UNIX TOWER, which acts as the host. This dissertation investigates the different facilities supported by some of the office automation systems compared in this thesis, and describes the COSNET features. This prototype office automation system supports many of the facilities that are supported by large office automation systems. COSNET allows the user to define any MS-DOS based editor or word processor, and uses a simple editor for the creation of mail. The electronic filing facility allows documents to be created, filed, retrieved and deleted, and thus provides the users with the necessary features for document exchange. A user may set access permissions to each of his documents and may grant other users either read or write access to a specific document. The mail facility lets the user read, file, forward, delete and print a message, and supports classification of mail. A calendar facility is used as an electronic diary and stores all the user's schedules. These schedules may be viewed in either daily, weekly and monthly display modes. Read and write access to the calendar can be set by the user, in order to allow other users to manipulate his schedules. Any MS-DOS based application software can be added to COSNET. This facility allows the COSNET user to configure the office automation system to simulate the office environment. COSNET thus supports most of the necessary features required by an office automation system.

Gli stili APA, Harvard, Vancouver, ISO e altri

Cizner, Pavel. "Procurement Automation". Master's thesis, Vysoká škola ekonomická v Praze, 2017. http://www.nusl.cz/ntk/nusl-359252.

Testo completo

Abstract (sommario):

The research goal was to find out the current and possible level of procurement automation and its contribution to less routine and more creative jobs. The goal was accomplished by literature review and data collection via survey. The data collected evaluated enterprises in developing and developed countries. The research hypothesis of developing countries automating more than developed ones was not supported by the data tested via Mann-Whithey U test. The data collected was from 146 respondents from all around the world. Therefore, there are limitations of the conclusions. The thesis and its survey contributes to the knowledge about the level of procurement automation.

Gli stili APA, Harvard, Vancouver, ISO e altri

Gewriye, Kristian. "Automatisering av kvalitetsinspektion vid storskalig fordonsproduktion : En fallstudie vid Scania CV". Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-79993.

Testo completo

Abstract (sommario):

Graden av automation inom industrin ökar ständigt, inom fordonstillverkning fasas allt fler produktionsnära personal ut till förmån för automatiska system och robotar. På Scanias hyttfabrik i Oskarshamn är stora delar av produktionen automatiserad och det söks ständigt efter nya möjligheter till effektivisering via automation. Detta examensarbete syftade till att utvärdera om kvalitetsinspektionen efter applicering av grundfärg kan automatiseras. Genom att analysera processen genomfördes utvärderingar av två automatiska inspektionssystem som i dag används inom fordonstillverkning. Historisk data analyserades för att identifiera vad ett potentiellt automatiskt inspektionssystem bör klara av. I samband med detta samlades information in för att identifiera vad dessa inspektionssystem faktiskt klarar av. Detta ställdes emot varandra och föranledde en investeringskalkyl för att ta fram en återbetalningstid, samt för att upptäcka vilka monetära besparingar det går att erhålla via ett automatiskt inspektionssystem. Analys genomfördes där fördelar och nackdelar med både dagens arbetssätt samt ett eventuellt framtida arbetssätt med automatiska system vägdes samman. Dessutom analyserades det till vilken grad kvalitetinspektionsprocessen hos Scania kan automatiseras, och vilka kvalitativa vinningar det leder till. I tillägg återger examensarbetet generella slutsatser på hur automatiska inspektionssystem fungerar samt presenterar resultat på om tekniken i dagsläget är mogen, och till vilken utsträckning. Avslutningsvis presenteras rekommendationer till Scania utifrån möjligheter och potentiella besparingar. Rekommendationen är att inte investera i ett automatiskt inspektionssystem, eftersom examensarbetet kommit fram till att inget av de utvärderade systemen kan operera på en tillfredsställande nivå. Tekniken är det vill säga inte ännu mogen för att automatisera denna typ av process.

Gli stili APA, Harvard, Vancouver, ISO e altri

Lindholm, David. "Economics of Test Automation : Test case selection for automation". Thesis, Linköpings universitet, Programvara och system, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-154941.

Testo completo

Abstract (sommario):

In this thesis a method for selecting test cases for test automation is developed and evaluated. Existing methods from the literature has been reviewed and modified resulting in the proposed method, a decision tree containing 23 factors grouped into 8 decision points. The decision tree has been used and evaluated in an industrial setting. The economic benefits were calculated with return on investment and the organisational benefits were measured in a survey at a software producing company. The result was that automated tests, selected with the decision tree, provided economic benefits after 0.5 to 4 years, these tests were also found leading to 3 organisational benefits: less human effort when testing, reduction in cost and allowing for shorter release cycles.

Gli stili APA, Harvard, Vancouver, ISO e altri

Borndalen, Philip. "Automation and Improved control of Bundle pusher : Automation control". Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-353933.

Testo completo

Abstract (sommario):

Newspapers are often bundled and packet on pallets to secure transport. Packing thebundles on pallets are often done with an automatic palletizer. For reliable operation,the bundle needed to have a correct position and orientation on the infeed conveyor.Wrong orientation can happen when the bundle is pushed from conveyor to thepalletisers conveyor. The main to reasons is wrong timing that leads to rotation of thebundle and to high pushing force that leads to tumbled bundles. The goal of thisproject is to make a prototype of a system that automatically adapts the pressure andsignal when to push using two laser sensors. One sensor sends a digital signal if laserbreaks, the other measure distance, e.g. bundle hight. The software was developed onan Arduino Uno board, and two interface board was made for voltage levelconversions. The prototype system managed to change pressure for different bundlesizes and timed the pushing signal correctly.

Gli stili APA, Harvard, Vancouver, ISO e altri

Makarechi, Shariar. "Automation Performance Index". Diss., Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/14063.

Testo completo

Abstract (sommario):

Automation is intended to improve overall building performance. Building Automation Systems (BAS) are attractive and popular due to their promise of increased operational effectiveness. BAS can be optimized and a well-designed and well-implemented BAS is expected to increase a buildings overall appeal and value as a result of improvement to its performance. In order to improve the level of automation in buildings, a measurement tool in the form of a performance index is needed. The goal of this research is to quantify a buildings level of automation-performance. The specific objective is to develop an Automation Performance Index (API) model for evaluating the extent of a buildings automation-performance. A methodology is outlined with ten tasks to accomplish the goals of this research and a criterion for each task is described. An extensive literature research and expert survey are performed to identify the key parameters that influence the performance of BAS. Seminars related to the building automation and commissioning fields were also attended to obtain the views of practitioners, manufacturers experts, as well as scholars in the field of building automation and performance commissioning. A Delphi method of research approach is conducted through a series of interviews and surveys of industry and academia experts. The feedback from experts and the research from literature, industry and academic resources are combined, classified and categorized for identification of significant parameters around which Automation Performance Index (API) model can be defined.

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Automation"

Ed, Krčma, Zummer Thomas, Macfarlane Kate e Drawing Room (Gallery), a cura di. Graphology: Drawing from automatism and automation. London: Drawing Room, 2012.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gordon, Lewis A. Library automation. [Chicago, Ill.]: Illinois Library Trustee Association, 1987.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hoffmann-Walbeck, Thomas. Workflow Automation. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-84782-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Pink, Sarah, Martin Berg, Deborah Lupton e Minna Ruckenstein. Everyday Automation. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003170884.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Szewczyk, Roman, Cezary Zieliński e Małgorzata Kaliczyńska, a cura di. Automation 2018. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-77179-3.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Merz, Hermann, Thomas Hansemann e Christof Hübner. Building Automation. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-88829-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Vongbunyong, Supachai, e Wei Hua Chen. Disassembly Automation. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-15183-0.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Tapscott, Don. Office Automation. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4613-2489-8.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Tsichritzis, Dionysios C., a cura di. Office Automation. Berlin, Heidelberg: Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-642-82435-7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Merz, Hermann, Thomas Hansemann e Christof Hübner. Building Automation. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-73223-7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Automation"

Familiar, Bob. "Automation". In Microservices, IoT, and Azure, 67–108. Berkeley, CA: Apress, 2015. http://dx.doi.org/10.1007/978-1-4842-1275-2_5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Laycock, John D., e Thomas Hartmann. "Automation". In Integrated Strategies for Drug Discovery Using Mass Spectrometry, 511–42. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2005. http://dx.doi.org/10.1002/0471721034.ch18.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Jordan, Bill. "Automation". In Automation and Human Solidarity, 17–30. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-36959-0_2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Dangelmayer, G. Theodore. "Automation". In ESD Program Management, 259–77. Boston, MA: Springer US, 1990. http://dx.doi.org/10.1007/978-1-4615-6933-6_13.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

McDonnell, Mark. "Automation". In Pro Vim, 181–88. Berkeley, CA: Apress, 2014. http://dx.doi.org/10.1007/978-1-4842-0250-0_13.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Meyer, Hanns-Martian, e Karl Obermayr. "Automation". In Objekte integrieren mit OLE2, 227–44. Berlin, Heidelberg: Springer Berlin Heidelberg, 1994. http://dx.doi.org/10.1007/978-3-642-78753-9_9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Magad, Eugene L., e John M. Amos. "Automation". In Total Materials Management, 421–64. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4684-6450-4_12.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Aitken-Christie, J. "Automation". In Micropropagation, 363–88. Dordrecht: Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-009-2075-0_23.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hagedorn, Jürgen, Florian Sell-Le Blanc e Jürgen Fleischer. "Automation". In Handbook of Coil Winding, 245–300. Berlin, Heidelberg: Springer Berlin Heidelberg, 2018. http://dx.doi.org/10.1007/978-3-662-54402-0_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Weik, Martin H. "automation". In Computer Science and Communications Dictionary, 89. Boston, MA: Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_1168.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Automation"

Thummalapenta, Suresh, Saurabh Sinha, Nimit Singhania e Satish Chandra. "Automating test automation". In 2012 34th International Conference on Software Engineering (ICSE 2012). IEEE, 2012. http://dx.doi.org/10.1109/icse.2012.6227131.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ciupa, Martin, Nicole Tedesco e Mostafa Ghobadi. "Automating Automation : Master Mentoring Process". In 11th International Conference on Security and its Applications. Academy & Industry Research Collaboration Center (AIRCC), 2018. http://dx.doi.org/10.5121/csit.2018.80103.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Schubert, A. U., M. Kurowski, M. Gluch, O. Simanski e T. Jeinsch. "Manoeuvring Automation towards Autonomous Shipping". In International Ship Control Systems Symposium. IMarEST, 2018. http://dx.doi.org/10.24868/issn.2631-8741.2018.020.

Testo completo

Abstract (sommario):

The German joint project GALILEOnautic aims to develop systems for autonomous navigation and optimised manoeuvring of vessels cooperating in areas with high safety and efficiency requirements, such as harbours or narrow waterways. In the conception of this project, the SAE levels of the automotive industry were applied for classification of intended levels in automation of already being used manoeuvring vessels. It fairly soon became apparent that the conditions in development of new autonomous road vehicles and the appropriate infrastructure are significantly different in comparison to adaption of navigation and manoeuvring of watercrafts which are part of a complex transport network. Therefor and in relation to the few orientating guidelines addressing autonomous maritime applications, a specific concept for manoeuvring automation in high safety areas was developed. It defines the automation levels towards autonomous shipping considering the current practice and the technical equipment on such vessels, the legal framework for automatic shipping as well as the requirements for integrating automatic manoeuvring in the traditional shipping traffic. The contribution introduces this automation concept and the necessary infrastructure for each level. Additionally, the results of the first project phase are presented. It implies the essential sensor equipment and subsequent data fusion to describe completely the dynamic ship motion and to recognise the close surrounding of the vessel. A hybrid control scheme is applied including feedforward and feedback modules. The control approach is illustrated by interfered encounter situations in ship handling simulator and for unmanned surface vehicles. The paper gives a prospect on the future investigations for higher manoeuvre automation.

Gli stili APA, Harvard, Vancouver, ISO e altri

Patil, Swati M., e Poonam V. Gaikwad. "Bluetooth Based Smart Automation System Using Android". In National Conference on Relevance of Engineering and Science for Environment and Society. AIJR Publisher, 2021. http://dx.doi.org/10.21467/proceedings.118.45.

Testo completo

Abstract (sommario):

The word automation is automatic control of operating devices with minimal or reduced human efforts. Influence of wireless technology is growing day by day. In today’s world, wireless technology doing significant role in the automation. It means automation makes technology free from human interruption. Home automation is one of the technology emerging these days. To make it more effective and efficient, cost is reduced by low cost communication technology like Bluetooth, Wi-Fi. Bluetooth is wireless technology to use in home automation. It is no operational cost technique, common in use and working in range up to 100 meters [2]. Bluetooth which is mainly used for data exchange, add new features to smartphones. With help of android application we are able to connect and control household appliances and provide security to handicapped, old people.

Gli stili APA, Harvard, Vancouver, ISO e altri

Ivanov, Svilen, Edgar Nett e Stefan Schemmer. "Automatic WLAN localization for industrial automation". In 2008 IEEE International Workshop on Factory Communication Systems - (WFCS 2008). IEEE, 2008. http://dx.doi.org/10.1109/wfcs.2008.4638748.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Aghito, Manuel, Knut Steinar Bjørkevoll, Roar Nybø, Ammon Eaton e John Hedengren. "Automatic Model Calibration for Drilling Automation". In SPE Bergen One Day Seminar. Society of Petroleum Engineers, 2017. http://dx.doi.org/10.2118/185926-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Lin, Alan C. "Automatic slider design for molding automation". In 2016 IEEE/SICE International Symposium on System Integration (SII). IEEE, 2016. http://dx.doi.org/10.1109/sii.2016.7843982.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Dukić, Valentina, Andrea Gutai, Andraš Anderla e Dušanka Dakić. "Production automation with the help of SolidCam tools". In 19th International Scientific Conference on Industrial Systems. Faculty of Technical Sciences, 2023. http://dx.doi.org/10.24867/is-2023-t4.1-3_02341.

Testo completo

Abstract (sommario):

Automation of production processes is crucial for improving efficiency and reducing manual labor in the manufacturing industry. SolidCam facilitates automation through various tools such as Automatic Feature Recognition (AFR) and IMachining that identifies and extracts machining features from CAD models, eliminating the need for manual feature programming. The software's toolpath optimization algorithms automatically generate the most efficient toolpaths, reducing machining time, minimizing tool wear, and improving surface finish. This paper presents an improved virtual simulation methodology of the milling process. The process begins with defining the toolpath and determining how to create paths that link to each other within SolidCam. With IMachining, automatic path detection is enabled, after which the tool that needs to be used is selected. When the path is selected, the processing method is determined and at the end the G code is generated which shows the coordinates for milling and additional operations if they are selected. It is also linked to the tool list that is passed on to the operators. Benefits using this kind of automation are discussed and compared with the traditional approach without using automated processes.

Gli stili APA, Harvard, Vancouver, ISO e altri

Drath, Rainer, Arndt Luder, Jorn Peschke e Lorenz Hundt. "AutomationML - the glue for seamless automation engineering". In Factory Automation (ETFA 2008). IEEE, 2008. http://dx.doi.org/10.1109/etfa.2008.4638461.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Tennyson, Stephen A., Sudhir I. Mehta e Bruce J. Lentner. "Automation of a Hydraulic Hose Assembly Plant". In ASME 1994 Design Technical Conferences collocated with the ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/detc1994-0371.

Testo completo

Abstract (sommario):

Abstract At present the manufacturing process throughout the hydraulic-hose assembly industry consists of manual operations. A study was conducted to determine the technical feasibility and costs of automating such a manufacturing plant. This paper describes the two automation concepts that were developed. One employs a robot to transfer hoses between workstations, and the other employs a rotary indexing table. Both concepts employ common linear-positioning fixtures controlled by a programmable logic controller to provide necessary hose manipulations at each workstation. A design for a hose-gripper assembly to contain each hose throughout the manufacturing process was developed, as well as schemes for changing the design of current production machinery to meet automation requirements. Production rate and cost estimates of each automation concept are presented.

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Automation"

Acemoglu, Daron, e Pascual Restrepo. Modeling Automation. Cambridge, MA: National Bureau of Economic Research, febbraio 2018. http://dx.doi.org/10.3386/w24321.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Huang, Hui-Min, Richard Quintero e Keith Young. Submarine automation:. Gaithersburg, MD: National Institute of Standards and Technology, 1995. http://dx.doi.org/10.6028/nist.ir.5676.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Beraja, Martin, e Nathan Zorzi. Inefficient Automation. Cambridge, MA: National Bureau of Economic Research, giugno 2022. http://dx.doi.org/10.3386/w30154.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Acemoglu, Daron, e Pascual Restrepo. Demographics and Automation. Cambridge, MA: National Bureau of Economic Research, marzo 2018. http://dx.doi.org/10.3386/w24421.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Acemoglu, Daron, e Jonas Loebbing. Automation and Polarization. Cambridge, MA: National Bureau of Economic Research, settembre 2022. http://dx.doi.org/10.3386/w30528.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Moshofsky, R. P., e W. T. Rohen. Workflow automation architecture standard. Office of Scientific and Technical Information (OSTI), novembre 1994. http://dx.doi.org/10.2172/10107952.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Kramer, Mitch. SAS Marketing Automation 3.1. Boston, MA: Patricia Seybold Group, maggio 2003. http://dx.doi.org/10.1571/pr5-2-03cc.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Stukal, Denis. Algorithms, Automation, and Misinformation. MediaWell, Social Science Research Council, settembre 2020. http://dx.doi.org/10.35650/md.2072.d.2020.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Coulson, Robert. Controlled Heading Automation Device. Ames (Iowa): Iowa State University. Library. Digital Press, gennaio 2017. http://dx.doi.org/10.31274/ahac.9753.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Carico, Dean. Flight Test Automation Options. Fort Belvoir, VA: Defense Technical Information Center, gennaio 1998. http://dx.doi.org/10.21236/ada350677.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!