Articoli di riviste sul tema "Amorphous metallic fiber"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Amorphous metallic fiber".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Choi, Se-Jin, Ji-Hwan Kim, Sung-Ho Bae e Tae-Gue Oh. "Strength, Drying Shrinkage, and Carbonation Characteristic of Amorphous Metallic Fiber-Reinforced Mortar with Artificial Lightweight Aggregate". Materials 13, n. 19 (7 ottobre 2020): 4451. http://dx.doi.org/10.3390/ma13194451.
Lee, Sangkyu, Gyuyong Kim, Hongseop Kim, Minjae Son, Yaechan Lee, Yoonseon Choi, Jongmyung Woo e Jeongsoo Nam. "Electromagnetic Wave Shielding Properties of Amorphous Metallic Fiber-Reinforced High-Strength Concrete Using Waveguides". Materials 14, n. 22 (20 novembre 2021): 7052. http://dx.doi.org/10.3390/ma14227052.
Bouillard, Théophile, Anaclet Turatsinze, Jean-Paul Balayssac, Ahmed Toumi, Olivier Helson e Xavier Bourbon. "Mechanical properties and self-sensing ability of amorphous metallic fiber-reinforced concrete". MATEC Web of Conferences 364 (2022): 02004. http://dx.doi.org/10.1051/matecconf/202236402004.
Lee, Bong-Chun, e Se-Jin Choi. "The Fluidity and Hardened Properties of Fiber Reinforced Mortar by Amorphous Metallic Fiber Ratios". Journal of the Architectural Institute of Korea Structure and Construction 30, n. 4 (25 aprile 2014): 51–58. http://dx.doi.org/10.5659/jaik_sc.2014.30.4.051.
Choi, Se-Jin, Byung-Tak Hong, Su-Jin Lee e Jong-Pil Won. "Shrinkage and corrosion resistance of amorphous metallic-fiber-reinforced cement composites". Composite Structures 107 (gennaio 2014): 537–43. http://dx.doi.org/10.1016/j.compstruct.2013.08.010.
Javed, Ayesha, Syed Asad Ali Gillani, Wasim Abbass, Muhammad Rizwan Riaz, Rashid Hameed, Safeer Abbas, Abdelatif Salmi e Ahmed Farouk Deifalla. "Mechanical Performance of Amorphous Metallic Fiber-Reinforced and Rubberized Thin Bonded Cement-Based Overlays". Sustainability 14, n. 13 (5 luglio 2022): 8226. http://dx.doi.org/10.3390/su14138226.
Lee, Jaesung, Seungcho Yang e Okpin Na. "Experimental Study on the Mechanical Properties of Amorphous Metallic Fiber-Reinforced Concrete". Journal of the Korean Society of Hazard Mitigation 18, n. 3 (30 aprile 2018): 1–6. http://dx.doi.org/10.9798/kosham.2018.18.3.1.
Dinh, Ngoc-Hieu, Kyoung-Kyu Choi e Hee-Seung Kim. "Mechanical Properties and Modeling of Amorphous Metallic Fiber-Reinforced Concrete in Compression". International Journal of Concrete Structures and Materials 10, n. 2 (giugno 2016): 221–36. http://dx.doi.org/10.1007/s40069-016-0144-9.
Kim, Hongseop, Gyuyong Kim, Jeongsoo Nam, Junghyun Kim, Sanghyu Han e Sanggyu Lee. "Static mechanical properties and impact resistance of amorphous metallic fiber-reinforced concrete". Composite Structures 134 (dicembre 2015): 831–44. http://dx.doi.org/10.1016/j.compstruct.2015.08.128.
Lee, Sangkyu, Gyuyong Kim, Hongseop Kim, Minjae Son, Gyeongcheol Choe, Koichi Kobayashi e Jeongsoo Nam. "Impact resistance, flexural and tensile properties of amorphous metallic fiber-reinforced cementitious composites according to fiber length". Construction and Building Materials 271 (febbraio 2021): 121872. http://dx.doi.org/10.1016/j.conbuildmat.2020.121872.
Bucholtz, F., K. P. Koo, A. M. Yurek, J. A. McVicker e A. Dandridge. "Preparation of amorphous metallic glass transducers for use in fiber optic magnetic sensors". Journal of Applied Physics 61, n. 8 (15 aprile 1987): 3790–92. http://dx.doi.org/10.1063/1.338647.
Dang, Cong-Thuat, My Pham e Ngoc-Hieu Dinh. "Experimental Study on Compressive and Flexural Performance of Lightweight Cement-Based Composites Reinforced with Hybrid Short Fibers". Materials 16, n. 12 (19 giugno 2023): 4457. http://dx.doi.org/10.3390/ma16124457.
Kim, Hongseop, Gyuyong Kim, Sangkyu Lee, Gyeongcheol Choe, Takafumi Noguchi e Jeongsoo Nam. "Direct tensile behavior of amorphous metallic fiber-reinforced cementitious composites: Effect of fiber length, fiber volume fraction, and strain rate". Composites Part B: Engineering 177 (novembre 2019): 107430. http://dx.doi.org/10.1016/j.compositesb.2019.107430.
Park, Ji Hun, Young Uk Kim, Jisoo Jeon, Seunghwan Wi, Seong Jin Chang e Sumin Kim. "Effect of eco-friendly pervious concrete with amorphous metallic fiber on evaporative cooling performance". Journal of Environmental Management 297 (novembre 2021): 113269. http://dx.doi.org/10.1016/j.jenvman.2021.113269.
Ferdiansyah, Teuku, Anaclet Turatsinze e Jean-Paul Balayssac. "Design and characterization of self-sensing steel fiber reinforced concrete". MATEC Web of Conferences 199 (2018): 11008. http://dx.doi.org/10.1051/matecconf/201819911008.
Veber, Alexander, Zhuorui Lu, Manuel Vermillac, Franck Pigeonneau, Wilfried Blanc e Laeticia Petit. "Nano-Structured Optical Fibers Made of Glass-Ceramics, and Phase Separated and Metallic Particle-Containing Glasses". Fibers 7, n. 12 (30 novembre 2019): 105. http://dx.doi.org/10.3390/fib7120105.
Yoo, Doo-Yeol, Nemkumar Banthia, Jun-Mo Yang e Young-Soo Yoon. "Size effect in normal- and high-strength amorphous metallic and steel fiber reinforced concrete beams". Construction and Building Materials 121 (settembre 2016): 676–85. http://dx.doi.org/10.1016/j.conbuildmat.2016.06.040.
Lee, Jae-In, Chae-Young Kim, Joo-Ho Yoon e Se-Jin Choi. "Study on the Engineering Properties of Cement Composites Using Carbon Nanotubes and Amorphous Metallic Fiber". Journal of the Korea Concrete Institute 36, n. 1 (29 febbraio 2024): 73–84. http://dx.doi.org/10.4334/jkci.2024.36.1.073.
Howe, James M. "In situ high-resolution Transmission electron microscopy of interphase boundary motion in metallic alloys". Proceedings, annual meeting, Electron Microscopy Society of America 49 (agosto 1991): 450–51. http://dx.doi.org/10.1017/s0424820100086556.
Kim, Hongseop, Gyuyong Kim, Sangkyu Lee, Gyeongcheol Choe, Jeongsoo Nam, Takafumi Noguchi e Viktor Mechtcherine. "Effects of strain rate on the tensile behavior of cementitious composites made with amorphous metallic fiber". Cement and Concrete Composites 108 (aprile 2020): 103519. http://dx.doi.org/10.1016/j.cemconcomp.2020.103519.
Choe, Gyeongcheol, Gyuyong Kim, Hongseop Kim, Euichul Hwang, Sangkyu Lee e Jeongsoo Nam. "Effect of amorphous metallic fiber on mechanical properties of high-strength concrete exposed to high-temperature". Construction and Building Materials 218 (settembre 2019): 448–56. http://dx.doi.org/10.1016/j.conbuildmat.2019.05.134.
Pavlov, V. F., e V. F. Shabanov. "Complex Pyrometallurgical Processing of Silicate Raw Material and Technogenic Waste into Market Products". Ecology and Industry of Russia 22, n. 12 (4 dicembre 2018): 14–18. http://dx.doi.org/10.18412/1816-0395-2018-12-14-18.
Zhou, Feng, Chengxin Du, Zhonghua Du, Guangfa Gao, Chun Cheng e Xiaodong Wang. "Penetration Gain Study of a Tungsten-Fiber/Zr-Based Metallic Glass Matrix Composite". Crystals 12, n. 2 (18 febbraio 2022): 284. http://dx.doi.org/10.3390/cryst12020284.
Haubner, Roland, e Mario Lessiak. "Deposition of CVD Diamond Coatings on Carbon Fiber Composite Substrates". Key Engineering Materials 742 (luglio 2017): 419–26. http://dx.doi.org/10.4028/www.scientific.net/kem.742.419.
Miah, Md Jihad, Junjie Pei, Hyeju Kim e Jeong Gook Jang. "Flexural behavior, porosity, and water absorption of CO2-cured amorphous metallic-fiber-reinforced belite-rich cement composites". Construction and Building Materials 387 (luglio 2023): 131668. http://dx.doi.org/10.1016/j.conbuildmat.2023.131668.
Lee, Kyuhong, Chang-Young Son, Sang-Bok Lee, Sang-Kwan Lee e Sunghak Lee. "Direct observation of microfracture process in metallic-continuous-fiber-reinforced amorphous matrix composites fabricated by liquid pressing process". Materials Science and Engineering: A 527, n. 4-5 (febbraio 2010): 941–46. http://dx.doi.org/10.1016/j.msea.2009.09.065.
Lim, Sang-Won, e Jeung-Soo Huh. "Interfacial Layer Effect on the Adhesion of the Ultra-Hard Thick TAC Film Deposition". Korean Journal of Metals and Materials 61, n. 3 (5 marzo 2023): 157–69. http://dx.doi.org/10.3365/kjmm.2023.61.3.157.
Awad, Ali, Israr Ahmed, Danial Qadir, Muhammad Saad Khan e Alamin Idris. "Catalytic Decomposition of 2% Methanol in Methane over Metallic Catalyst by Fixed-Bed Catalytic Reactor". Energies 14, n. 8 (16 aprile 2021): 2220. http://dx.doi.org/10.3390/en14082220.
Janusz, M., L. Major, J. M. Lackner, B. Grysakowski e H. Krawiec. "Microstructure characterization of localized corrosion wear of Cr/Cr2N+ a-C:H/a-C:H:Cr multilayer coatings on carbon fiber composites". Bulletin of the Polish Academy of Sciences Technical Sciences 65, n. 2 (1 aprile 2017): 171–77. http://dx.doi.org/10.1515/bpasts-2017-0021.
Guo, Yajie, Yongjie Liu, Yanrong Liu, Chunrui Zhang, Kelun Jia, Jibo Su e Ke Wang. "The High Electrocatalytic Performance of NiFeSe/CFP for Hydrogen Evolution Reaction Derived from a Prussian Blue Analogue". Catalysts 12, n. 7 (4 luglio 2022): 739. http://dx.doi.org/10.3390/catal12070739.
Georgarakis, Konstantinos, Dina V. Dudina e Vyacheslav I. Kvashnin. "Metallic Glass-Reinforced Metal Matrix Composites: Design, Interfaces and Properties". Materials 15, n. 23 (22 novembre 2022): 8278. http://dx.doi.org/10.3390/ma15238278.
Kim, S. W., J. Namkung e Ohjoon Kwon. "Manufacture and Industrial Application of Fe-Based Metallic Glasses". Materials Science Forum 706-709 (gennaio 2012): 1324–30. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.1324.
Choi, Kyoung-Kyu, Hajin Choi e Jong-Chan Kim. "Shrinkage cracking of amorphous metallic fibre-reinforced concrete". Proceedings of the Institution of Civil Engineers - Structures and Buildings 168, n. 4 (aprile 2015): 287–97. http://dx.doi.org/10.1680/stbu.13.00084.
Choi, Kyoung-Kyu, Gia Toai Truong e Se-Jin Choi. "Restrained shrinkage cracking of amorphous metallic fibre-reinforced concrete". Proceedings of the Institution of Civil Engineers - Structures and Buildings 168, n. 12 (dicembre 2015): 902–14. http://dx.doi.org/10.1680/stbu.14.00051.
Kim, Hyun Guen, Kazuhiro Nakata, Takuya Tsumura, Masaharu Sugiyama, Takanori Igarashi, Masahiro Fukumoto, Hisamichi Kimura e Akihisa Inoue. "Effect of Particle Size Distribution of the Feedstock Powder on the Microstructure of Bulk Metallic Glass Sprayed Coating by HVOF on Aluminum Alloy Substrate". Materials Science Forum 580-582 (giugno 2008): 467–70. http://dx.doi.org/10.4028/www.scientific.net/msf.580-582.467.
Wu, Zhang, Chen, Li e Zhang. "A Multiple Twin-Roller Casting Technique for Producing Metallic Glass and Metallic Glass Composite Strips". Materials 12, n. 23 (21 novembre 2019): 3842. http://dx.doi.org/10.3390/ma12233842.
Yang, Jun-Mo, Jin-Kook Kim e Doo-Yeol Yoo. "Effects of amorphous metallic fibers on the properties of asphalt concrete". Construction and Building Materials 128 (dicembre 2016): 176–84. http://dx.doi.org/10.1016/j.conbuildmat.2016.10.082.
Jiang, Chenchen, Haojian Lu, Ke Cao, Wenfeng Wan, Yajing Shen e Yang Lu. "In Situ SEM Torsion Test of Metallic Glass Microwires Based on Micro Robotic Manipulation". Scanning 2017 (2017): 1–7. http://dx.doi.org/10.1155/2017/6215691.
Seo, Min-Seok, Hee-Seung Kim, Gia Toai Truong e Kyoung-Kyu Choi. "Seismic behaviors of thin slender structural walls reinforced with amorphous metallic fibers". Engineering Structures 152 (dicembre 2017): 102–15. http://dx.doi.org/10.1016/j.engstruct.2017.09.004.
Xu, Wan Qiang, Lalu Robin, Kevin J. Laws, Rong Kun Zheng e Michael Ferry. "The Redistribution and Alignment of Crystalline Flakes in a Bulk Metallic Glass Composite during Thermoplastic Forming". Materials Science Forum 702-703 (dicembre 2011): 971–74. http://dx.doi.org/10.4028/www.scientific.net/msf.702-703.971.
Christopoulos, A. C., I. Koulalis, G. J. Tsamasphyros e G. Kanderakis. "Investigation of Strain Sensing Capabilities of Amorphous Magnetostrictive Wires Embedded in Epoxy Resin". Key Engineering Materials 495 (novembre 2011): 276–79. http://dx.doi.org/10.4028/www.scientific.net/kem.495.276.
Su, Shuang, Yongjiang Huang, Jiapeng Zhang, Lunyong Zhang, Huan Wang, Zhiliang Ning e Jianfei Sun. "Tensile Properties of Melt-Extracted and Annealed Ni/Fe-Based Amorphous Metallic Fibers". Metals 12, n. 6 (27 maggio 2022): 918. http://dx.doi.org/10.3390/met12060918.
Yang, Jun-Mo, Hyun-Oh Shin e Doo-Yeol Yoo. "Benefits of using amorphous metallic fibers in concrete pavement for long-term performance". Archives of Civil and Mechanical Engineering 17, n. 4 (settembre 2017): 750–60. http://dx.doi.org/10.1016/j.acme.2017.02.010.
Nayar, Sunitha K., e Ravindra Gettu. "Benefits of using amorphous metallic fibres in concrete slabs-on-grade". RILEM Technical Letters 1 (31 dicembre 2016): 122. http://dx.doi.org/10.21809/rilemtechlett.2016.20.
Shaikh, Faiz Uddin Ahmed, Narwinder Singh Kahlon e Attiq Ur Rahman Dogar. "Effect of Elevated Temperature on the Behavior of Amorphous Metallic Fibre-Reinforced Cement and Geopolymer Composites". Fibers 11, n. 4 (28 marzo 2023): 31. http://dx.doi.org/10.3390/fib11040031.
Zhao, Shuo, Runqing Liu e Jun Liu. "Experimental study of the durability of high-performance cementitious composites with amorphous metallic fibers". Construction and Building Materials 367 (febbraio 2023): 130295. http://dx.doi.org/10.1016/j.conbuildmat.2023.130295.
Nešpor, Bohdan, e Martin Nejedlík. "Development of Electrically Conductive Composite Sensors with the Addition of Functional Fillers". Solid State Phenomena 272 (febbraio 2018): 34–40. http://dx.doi.org/10.4028/www.scientific.net/ssp.272.34.
Kanade, Pragnya, e Bharat H. Patel. "Copper nano mediated hygienic textiles with improved aesthetic properties". Research Journal of Textile and Apparel 21, n. 2 (5 giugno 2017): 146–58. http://dx.doi.org/10.1108/rjta-01-2017-0004.
Ajoku, Chinedu A., Anaclet Turatsinze e Ariane Abou-Chakra. "Use of fibres in improving the mechanical properties of a multifunctional cement for structural repair purposes". MATEC Web of Conferences 364 (2022): 04002. http://dx.doi.org/10.1051/matecconf/202236404002.
Kim, Ji-Hwan, Sung-Ho Bae e Se-Jin Choi. "Effect of Amorphous Metallic Fibers on Strength and Drying Shrinkage of Mortars with Steel Slag Aggregate". Materials 14, n. 18 (18 settembre 2021): 5403. http://dx.doi.org/10.3390/ma14185403.