Tesi sul tema "Agregates"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Agregates".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.
Gierczycki, Andrzej. "Powstawanie i rozpad agregatów ciała stałego zawieszonych w cieczy". Praca habilitacyjna, Wydawnictwo Politechniki Śląskiej, 2005. https://delibra.bg.polsl.pl/dlibra/docmetadata?showContent=true&id=10166.
Carvalho, Joseane Carina Borges de. "Condição dos agregados e da constituição microbiologica de solos submetidos a diferentes usos e manejos agricolas em Selviria (MS)". [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/287226.
Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Geociências
Made available in DSpace on 2018-08-07T05:40:21Z (GMT). No. of bitstreams: 1 Carvalho_JoseaneCarinaBorgesde_M.pdf: 4092551 bytes, checksum: 7db0785f360c7cf4341ce58b1534c898 (MD5) Previous issue date: 2006
Resumo: Este estudo trata do processo de degradação da estrutura do solo sob diferentes condições de uso, a partir da análise da estabilidade dos agregados e análise microbiológica, aliados a análises de rotina, como a distribuição granulométrica e complexo sortivo, carbono e pH, além da densidade e porosidade do solo. Os diferentes usos dos solos estudados foram: substrato degradado, substrato degradado com aplicação de lodo, solo com pastagem, substrato com vegetação regenerada (capoeira) e solo sob cerrado. Os tratamentos que sofreram degradação estão inseridos em uma grande ¿área de empréstimo¿, no município de Selvíria (MS), onde está instalada a Fazenda de Ensino e Pesquisa da UNESP do Campus de Ilha Solteira/SP, ao lado da Usina Hidrelétrica de Ilha Solteira. Todos os tratamentos sem lodo revelaram baixa fertilidade dos solos, em função dos teores de bases, matéria orgânica e CTC, além de processos de compactação mecânica, com altos valores de densidade associados. O emprego do lodo de esgoto no substrato degradado imprimiu mudanças consideráveis nos solos. A análise de agregados mostrou altos percentuais de componentes estruturais nas classes de menores tamanhos, muito adensados, em consonância com a porosidade e a densidade. A aplicação de lodo de esgoto provocou melhora no substrato degradado, com aumento do percentual de agregados nas classes de tamanho maiores, aliado à diminuição da densidade. Os solos com pastagem e cerrado, em ambientes menos impactados, apresentaram maior estabilidade dos agregados nas classes de tamanhos maiores, em decorrência da ação de suas vegetações, promovendo constantes aportes de material orgânico. A biomassa microbiana e a contagem de bactérias atestaram que os tratamentos foram fortemente influenciados pela quantia e qualidade de material orgânico fornecido, constituindo exemplo sensível a melhoria das condições do substrato degradado, por exemplo, a biomassa microbiana, dentre os solos degradados, ou com lodo aplicado, ultrapassando, nesse quesito, a qualidade do solo degradado que já regenerou uma capoeira. Outro exemplo dessa eficiência foi observado na pastagem, em que as gramíneas proporcionaram valores mais pronunciados na contagem das bactérias do que no solo sob cerrado, confirmado também na estabilidade dos seus agregados, ressaltando a importância da rizosfera das gramíneas para o fornecimento de exsudatos como fonte de energia e nutrientes para a comunidade bacteriana. Assim, a condição dos agregados associada à constituição microbiológica mostraram-se nitidamente dependentes das práticas de manejo dos solos envolvidos, com resultados muito benéficos trazidos pela aplicação de material orgânico, no caso, o lodo de esgoto
Abstract: The aim of this study was the evaluation of the degradation processes of soil structure under different cropping systems, with aggregate stability analysis and microbial biomass activities allied to soil routine analysis, like granulometric evaluation and sorption complexes, carbon, pH, density and soil porosity. Different cropping systems evaluated in study area were: degraded substrate, sludge added in degraded substrate, pasture soil, regenerated plants soils (underbrush) and scrubland. Treatments that suffered degradation are inserted in a wide-range ¿lending area¿, in Selvíria municipality, Mato Grosso do Sul state, where is established Unesp's Fazenda de Ensino e Pesquisa - Ilha Solteira Campus, besides Ilha Solteira powerplan. In different studied cropping systems, all treatments without the use of sewage sludge showed low fertility, characterized by low base supplies, organic matter and CEC. The use of sewage sludge in the degraded substrate showed considerable changes in soils. Aggregated stability analysis were efficient in changing detection by cropping systems in soil structures. High aggregate percentages were detected in degraded treatment in small size classes, very thick, as seen on porosity and density analysis, with substantial improvements in degradated substrate with sludge, which shows high aggregated percentage in large size classes, allied to lower densities. Pasture and scrubland soils in less impacted environments, showed more aggregated stability on the large size classes, due to its vegetation action, promoting constant furnishing of organic material. Microbial biomass activities showed, by microbial determination and bacterial counts, that treatments were strongly dependent by quality and quantities of available organic matter, this is an sensible example of an upgrade of a degraded substrate. For example, microbial biomass in the substrate degradated, soil with sludge was better, in this point, on the quality of degradated soil and underbrush soil. Other efficiency example was observed by grass species, which proportionate more acceptable values compared to stunted vegetation soils regarding bacterial counting, that reflects in soil aggregate stabilities in this treatment, confirmed the grass rizosphere importance in supplying the energy and nutrient sources to microbial biomass. Therefore, the aggregated condition associated to the microbiological constitution showed up clearly dependent on the cropping systems of the involved soils, with results very positives brought by the application of organic material, sewage sludge, in this case
Mestrado
Análise Ambiental e Dinâmica Territorial
Mestre em Geografia
Roth, Fanny. "Les agrégats de PABPN1 dans la dystrophie musculaire oculopharyngée". Electronic Thesis or Diss., Sorbonne université, 2019. https://accesdistant.sorbonne-universite.fr/login?url=https://theses-intra.sorbonne-universite.fr/2019SORUS342.pdf.
Oculopharyngeal muscular dystrophy (OPMD) is a late onset autosomal genetic disease characterized by a restrictive muscle weakness: pharyngeal muscles (including cricopharyngeal muscle (CPM)) as well as eyelid muscles are primarly affected leading to swallowing difficulties (dysphagia) and eyelid drooping (ptosis) respectively. This disease stems from a short polyalanine expansion in the Poly(A) Binding Protein Nuclear 1 (PABPN1) leading to the formation of nuclear aggregates in the muscle of OPMD patients. The objectives of this study are : 1/ to characterize PABPN1 nuclear aggregates on human muscle biopsies to evaluate if age and genotype influence their features and 2/ to assess the efficacy of the anti-aggregates molecule guanabenz (GA) on mammalian models of OPMD. The results show that aging and genotype of OPMD patients influence the size, the percentage or the composition of nuclear aggregates. Treatment of cellular and mouse model of OPMD with guanabenz allows a diminution in the percentage and the size of nuclear aggregates as well as an improvement of the mice muscle phenotype. GA acts through the unfolded protein response to endoplasmic reticulum stress (ER) showing for the first time that ER stress is activated in OPMD. This study suggestes that the use of pharmacological molecules modulating notably ER stress is a promising strategy to treat OPMD
Henry, Erwin. "Synthèse d’agrégats organo-minéraux : analogues des particules en suspension de rivières". Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0209.
Suspended matter (SM) is involved in the transfer of matter from the continents to the oceans. TSS is quantitatively derived from several sources: erosion of continental surfaces, remobilisation of sediments, aquatic biological activity, and anthropogenic activity introducing particles directly into the aquatic environment. Their composition, size distribution and nature will depend on all the processes that control erosion, biological activity and human activities within a catchment. The objective of this thesis is to develop model systems that mimic suspended matter to better understand the reactivity of these natural particles. The question arises as to the choice of constituents to model these model systems. The work on the suspended matter of the Moselle allows the selection of constituents typical of the natural suspended matter transported by the surface waters of the Moselle basin and by the Orne. In order to reproduce the precipitation of iron oxyhydroxides on illite particles, a weakly concentrated Fe(NO3)3 solution (10-4M) to avoid alteration of the illite particles will be added to an illite suspension and hydrolysed by a KOH solution. The concentration and rate of KOH addition, the titration method and the Fe/illite ratio added during this synthesis will be studied. As the association between illite and polymers is poor in the literature, it was necessary first to prepare an additional series of binary illite-polysaccharide samples to better highlight the influence of iron particles on the interactions between the polymer (Dextran or sodium alginate) and illite particles. In the case of the formation of ternary aggregates, there was no established protocol at the beginning of the thesis. The work first consisted in testing several preparation or synthesis conditions, checking the reproducibility and understanding the influence of each synthesis parameter. The thesis is divided into 4 parts. The first part is a reminder of the different knowledge established on suspended matter, particularly its composition and origins. A summary of the materials present in suspended solids as a subject of research is also developed. A second part presents the strategies for the formation of binary and ternary aggregates as well as the choice of analytical techniques to meet the objectives. These strategies are based on the choice made from several tests carried out during this work. A third part deals with the results obtained on the formation of binary aggregates based on illite and polysaccharides. This chapter details the formation of illite-polysaccharide aggregates as a function of several parameters such as the stirring time of the mixture, the concentration of the bivalent salt CaCl2, the concentration and molecular weight of the polysaccharide and the added polysaccharide. Chapter 4 is presented as a scientific paper under review for Applied Clay Science. This chapter, in the form of a scientific article in preparation, first presents the formation of binary Fe-illite aggregates as a function of several parameters such as the rate of addition or the concentration of added KOH and the amount of added iron in the illite suspension. A reminder of some of the results of chapter III is also given. In a second step, the formation of ternary aggregates is compared to that of binary illite-polysaccharide aggregates. A general conclusion is also given at the end of this thesis, allowing us to propose some perspectives to this work
DE, FRUTOS MARTA. "Effets collectifs dans les agregats". Paris 11, 1992. http://www.theses.fr/1992PA112229.
Costa, Paulo Fernando do Amaral. "Agregados coloidais zwitteriônicos nanoestruturados". reponame:Repositório Institucional da UFSC, 2016. https://repositorio.ufsc.br/xmlui/handle/123456789/167885.
Made available in DSpace on 2016-09-20T04:30:09Z (GMT). No. of bitstreams: 1 340439.pdf: 2251044 bytes, checksum: eadb24029df80afa89b0d6ed9ec28b8e (MD5) Previous issue date: 2016
Neste trabalho foram investigadas as propriedades físico-químicas de agregados micelares correlacionando intimamente com seu efeito catalítico sobre reações de descarboxilação. Os surfactantes empregados foram SB3-10, SB3-12, SB3-14 e ImS3-14, em especial o SB3-14 e ImS3-14, elegidos como os mais adequados. O líquido iônico BMIMBr foi utilizado na solubilização do ImS3-14. As propriedades físico-químicas avaliadas foram: concentração micelar crítica, diâmetro hidrodinâmico, efeito do BMIMBr sobre o potencial zeta, polaridade e efeito do BMIMBr sobre a polaridade. Visando avaliar o efeito catalítico foram investigados as propriedades espectroscópicas e os seguintes parâmetros: efeito do pH, efeito do líquido iônico BMIMBr, efeito da concentração do surfactante, parâmetros termodinâmicos de ativação e efeito de íons. As reações foram fortemente catalisadas apresentando um aumento de kM de 286x em ImS3-14/BMIMBr; de 378x em SB3-14/BMIMBr; e de 395x em SB3-14. A elucidação do efeito catalítico foi efetuada a partir de efeitos de ligação do brometo, BMIM+, potencial zeta, polaridade e ligação de íons. Os resultados obtidos são consistentes, os quais permitiram compreender os fenômenos que regem o efeito catalítico de tais agregados sobre reações de descarboxilação a partir de correlações com suas propriedades físico-químicas.
Abstract: In this work we investigated the physicochemical properties of micellar aggregates correlating closely with its catalytic effect on decarboxylation reactions. The surfactants used were SB3-10, SB3-12, SB3-14 and ImS3-14, especially SB3-14 and ImS3-14, chosen as the most suitable. The ionic liquid BMIMBr was used to solubilize the ImS3-14. The physicochemical properties evaluated were: critical micellar concentration, hydrodynamic diameter, BMIMBr effect on the zeta potential, polarity and BMIMBr effect on the polarity. In order to evaluate the catalytic effect were investigated the spectroscopic properties and the following parameters: pH effect, ionic liquid BMIMBr effect, effect of the surfactant concentration, activation thermodynamic parameters and ion effect. The reactions were strongly catalyzed presenting an kM increase of 286x in ImS3-14 / BMIMBr; of 378x in SB3-14 / BMIMBr; and of 395x in SB3-14. The elucidation of the catalytic effect has been properly performed from effects of bromide binding, BMIM+, zeta potential, polarity, and ion binding. The results are consistent, which allowed from correlations with physico-chemical properties, a deeper understanding of factors that govern the catalytic effect of such aggregates on decarboxylation reactions.
Ott, Albrecht. "Etude des agregats de molecules amphiphiles par des techniques optiques. Cas des agregats flexibles, et role des fluctuations thermiquesf". Paris 6, 1990. http://www.theses.fr/1990PA066641.
Aparicio, Sánchez Pablo Arturo. "Electronic Effects Governing the Redox Properties of Polyoxometalates". Doctoral thesis, Universitat Rovira i Virgili, 2014. http://hdl.handle.net/10803/352216.
Los polioxometalatos (POMs) son agregados inorgánicos compuestos por oxígeno y metales de transición, normalmente en su estado de oxidación más alto. Este hecho hace que una de sus principales características sea su gran carácter oxidante. Además al contener un alto número de metales, estos pueden ser reducidos fácilmente, dando lugar a nuevas propiedades no observadas en los mismos compuestos sin reducir. Nuestros estudios se han basado principalmente en cálculos mecano-cuánticos (teoría del funcional de la densidad, DFT en inglés). Muchos estudios experimentales se han realizado durante las últimas décadas abarcando el tema de las mono-reducciones, donde estos compuestos ganan un electrón. En esta tesis se ha querido partir de esos resultados y hemos ampliado el estudio a las reducciones con dos y tres electrones en varios sistemas de composición y tamaño distinto. Nos hemos centrado básicamente en el estudio de los compuestos denominados Keggin (12 metales) y Wells-Dawson (18 metales). Además, compuestos derivados de éstos también han sido estudiados, en concreto los mono-sustituidos, donde uno de los metales es sustituido por otro diferente. Nuestros mayores logros han sido reproducir las tendencias experimentales y explicar efectos que hasta el momento no se habían podido resolver.
The polyoxometallates (POMs) aggregates are inorganic compounds of transition metals and oxygen, usually in its highest oxidation state. This fact makes one of its main characteristics is its high oxidizing character. In addition to they contain a large number of metals, that can be easily reduced, resulting in new properties not observed in the same compounds without reducing. Our studies have been based mainly on quantum mechanical calculations (theory of density functional, DFT). Many experimental studies have been conducted over the past decades covering the issue of mono-reductions where these compounds gain an electron. In this thesis we have started from these results and we have extended the study to the reductions with two and three electrons in various systems of different size and composition. We focused mainly on the study of compounds called Keggin (12 metals) and Wells-Dawson (18 metals) polyoxoanions. Furthermore, derivatives of these compounds have also been studied, in particular the mono-substituted, wherein one of the metals is replaced by a different one.
Lehocká, Nikola. "Agregace hyaluronanu substituovaného palmitoylem". Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2018. http://www.nusl.cz/ntk/nusl-376858.
López, Marne Estefanía. "Col·lisions ió - molècula: reaccions químiques i agregats iònics". Doctoral thesis, Universitat de Barcelona, 2015. http://hdl.handle.net/10803/379826.
This thesis studies gas-phase reactions generated by collisions between ions and neutral molecules, in an experimental and theoretical approach. The report is divided into two blocks. The first, done in the laboratory of Dynamics of Chemical Reactions (UB), is focused on dehydrohalogenation and dehydration processes in organic molecules (iso-C3H7Br and iso-C3H7OH) induced by collisions with the Li+, Na+ and K+ alkaline cations in reactions interesting to astrochemistry and atmospheric chemistry. The measurements, done with a RF-GIB apparatus (Radio Frequency—Guided Ion Beams), at very low pressures, show the formation of several products in each of the reacting systems. It has been possible to determine and quantify the cross section in front of the collision energy of the center of mass (CM) for the adduct ion-molecule product and for the dehydration and dehydrohalogenation reactions as well as other reaction channels that coexist with them. Each one of them has a different energy threshold and different maximum value of the reaction cross section, which will be directly related to the reactivity. The topology of the potential energy surface, determined with MP2 and 6-31G (d, p) basis, the geometry of the stationary points found and the reaction path defined by the IRC approach provide an overview of the system that we cannot obtain only with the experimental data. Direct dynamics calculations (on the fly dynamics), made with the Venus / NwChem program also serve to justify both the theoretical mechanisms and the laboratory measurements, giving an idea of the process evolution point to point. The second part is focused in ion-molecule reactions that could take place in Titan's atmosphere, the largest moon of Saturn, which has an atmosphere containing highly reactive molecules. Due to ultraviolet light from the Sun the most abundant species in Titan, N2 and CH4, become ionized and react producing molecules that may also be present on Earth (CH3CN, HCN, C6H6, etc ...). The study of Titan's atmosphere is focused on knowing the beginning of life on Earth, and this second part of the thesis is closely linked to molecular growth and pre-biotic chemistry, related to the formation of biomolecules starting from small non-biological organic molecules. In the Atomic and Molecular Physics Laboratory of Trento have been carried out different reactions between different isomers with molecular formula C4H5N and C4H5NH±, present on Titan's atmosphere. The reactions gave different adducts ion-molecule, which can evolve to other reaction products. The PES has been studied in detail for the isomer cyclopropile cyanide, finding that there is a predisposition to break its 3-carbon ring, due the angle tension, and give a birradical specie. Ab initio calculations have determined the optimized geometry of the adduct + [C8H10N2H] , and has been observed that the tendency to break the ring is only representative in the case of neutral cyclopropile cyanide. A pre-biotic mechanism has been proposed starting from the adduct ion-molecule structure, where the opening of a 3-C cycle could generate a birradical intramolecular attack to other areas reactive areas in the molecule, as the -CN group. The transition state for this process has been optimized with the CASSCF method and the 6-31g(d,p) basis, and the corresponding IRC starting from this transition state conduce us, in one hand to the ion-molecule adduct, and in the other hand to a more stable covalent cyclic adduct. This new cyclic adduct, resembles the structure of certain nucleobases present in human DNA.
KEBAILI, NOUARI. "Reponse optique, effets thermodynamiques dans les agregats metalliques". Paris 11, 1997. http://www.theses.fr/1997PA112404.
Calvo, Florent. "Quelques aspects statiques, dynamiques et thermodynamiques des agregats". Toulouse 3, 1998. http://www.theses.fr/1998TOU30086.
Correia, Leandro Tavares. "Modelos dinâmicos para dados agregados". reponame:Repositório Institucional da UnB, 2010. http://repositorio.unb.br/handle/10482/8276.
Submitted by Jaqueline Ferreira de Souza (jaquefs.braz@gmail.com) on 2011-06-06T22:12:07Z No. of bitstreams: 1 2010_LeandroTavaresCorreia.pdf: 1328237 bytes, checksum: fa092671ee62cf204b5794b18e95461b (MD5)
Approved for entry into archive by Jaqueline Ferreira de Souza(jaquefs.braz@gmail.com) on 2011-06-06T22:22:07Z (GMT) No. of bitstreams: 1 2010_LeandroTavaresCorreia.pdf: 1328237 bytes, checksum: fa092671ee62cf204b5794b18e95461b (MD5)
Made available in DSpace on 2011-06-06T22:22:07Z (GMT). No. of bitstreams: 1 2010_LeandroTavaresCorreia.pdf: 1328237 bytes, checksum: fa092671ee62cf204b5794b18e95461b (MD5)
Com base na abordagem bayesiana de Modelos Dinâmicos, séries de tempo de dados composicionais são modeladas para análises de previsão e de comportamento. Por se tratar de dados convertidos para a escala de proporções relativas a uma série agregada, os modelos são construídos utilizando-se de transformações razão-log e distribuição Logística-Normal, nos casos em que se assume a normalidade dos dados. Para casos mais gerais, os modelos baseiam-se na classe dos Modelos Lineares Dinâmicos Generalizados (MLDG), e em dados com distribuição Beta, e tais desenvolvimentos consistem em contribuições inéditas na área de modelos dinâmicos. _____________________________________________________________________________ ABSTRACT
Using a bayesian approach for Dynamic Models, compositional time series data are modeled for forecasting and analysing data behavior. Since the original data is converted to the scale of relative proportions of the aggregated series, the models are constructed using log-ratio transformation and Logistic-Normal distribution for the cases where the restriction of normally distributed data is assumed. For more general situations, we develop methodology for models that are related to the class of Dynamic Generalized Linear Models (DGLM), more specifically for the Beta distribution. Such developments represent new contributions in the area of dynamic models.
Pereira, Ana Cláudia Soares. "Medidas reológicas em agregados celulares". reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2006. http://hdl.handle.net/10183/8580.
The correct positioning of the cells that rnake the different tissues in developing organisrns is a fundamental problem in ernbriogenesis. The Differential Adhesion Hypothesis (DAI-I), by Steinberg, proposes that part of the problern is resolved due to adhesion affinities between cells. According to this view, different cells in a tissue aggregates to rnillimize the surface energy similar to rnolecules in an immiscible liquid, segregating to rninimize surface energy. Therefore cell aggregates present surface tensions that are related with the adhesion forces. In this work, we present a new technique to measure surface tensions in ceU aggregates, USillghydra ceU aggregates as a model. For this, one equiparnent was developed in Physicist Institute at UFRGS.
Santos, André Gonçalo Bernardes. "Bases granulares de agregados reciclados". Master's thesis, Universidade de Aveiro, 2009. http://hdl.handle.net/10773/4821.
O sector da construção civil incluindo a manutenção dos pavimentos rodoviá-rios consome enormes quantidades de agregados anualmente. A utilização de materiais reciclados contribui para a diminuição da demanda de exploração destes recursos naturais. Seguindo esta perspectiva, o objectivo principal do presente trabalho foi ava-liar a aplicação de agregados obtidos pela reciclagem de pavimentos betumi-nosos degradados para a construção de camadas de base de novos pavimen-tos em obras de reabilitação rodoviária. Este trabalho também faz referência à constituição e comportamento dos vários tipos de pavimentos, dando ênfase aos pavimentos rodoviários flexíveis, tal como às suas principais formas de degradação. Descrevem-se, tam-bém, as técnicas de reciclagem mais usuais. Na parte experimental, descrevem-se os trabalhos laboratoriais realizados para a caracterização dos materiais e para o estudo das misturas recicladas, avaliando o seu comportamento. No final, apresentam-se as principais conclusões e perspectivas futuras.
The civil construction including the roads pavements maintenance consumes large amounts of aggregates annually. The utilization of recycled materials contributes for reducing natural resources extraction demand. Following this perspective, the aim of the present work was to evaluate the aggregates implementation obtained by bituminous pavement recycling for new pavement base layers construction in rehabilitation roads works. This work also refers the several pavements types, constitution and behavior giving emphasis to flexible road pavements as well as their main degradation forms. The recycling techniques are also described. Laboratorial tests are described for the materials characterization and for the study of mixed recycled mixtures, in order to assess their behavior. Main conclusions and future prospects are also presented.
Ourives, Licínia. "Ensaio triaxial cíclico em agregados". Master's thesis, Universidade de Évora, 2012. http://hdl.handle.net/10174/14864.
Silva, Marcelo. "Carga superficial de agregados nanoestruturados". Florianópolis, SC, 2011. http://repositorio.ufsc.br/xmlui/handle/123456789/95447.
Made available in DSpace on 2012-10-26T01:46:30Z (GMT). No. of bitstreams: 1 302711.pdf: 2939867 bytes, checksum: a1796629a3ea85f7577133e33f548d3f (MD5)
A adição de sais em soluções de surfactantes dipolares iônicos promove incorporação específica de ânions nas superfícies das micelas. Essa incorporação gera um caráter aniônico nas micelas que atrai eletrostaticamente íons H3O+ para a superfície micelar. A ordem de incorporação segue a série de Hofmeister e é ClO4- > Br- > Cl- > OH-. Este efeito atualmente é chamado de efeito camaleão. No presente trabalho calculou-se e usou-se o equilíbrio de protonação do 1-naftol (1NOH, pKa* = 2,47 e pKa = 9,33) e 2-naftol (2NOH, pKa* = 2,26 e pKa = 9,71), para investigar mudanças de pH ocorridas em superfícies de agregados micelares nanoestruturados formados por surfactantes dipolares iônicos de 1-propanosulfonato-N-tetradecil-N,N-dimetilamonio (SB3-14). Observou-se mudanças de mais de uma unidade de pH na fase micelar da SB3-14 pela adição de 0,04 M de NaClO4 e, as mudanças foram comparadas com aquelas na presença do surfactante aniônico dodecilsulfato de sódio, SDS. Cálculos teóricos das sondas 1NOH e 2NOH mostram que essas sondas adquirem uma acidez elevada no estado excitado. A reação de transferência de próton entre a sonda 2NOH* (no estado excitado) e diferentes ânions orgânicos como acetato, propionato, formiato, trifluoracetato e perclorato, foi estudada em água. As constantes de velocidades encontradas foram de kPT = 3,8 x 108 M-1 s-1 para os íons acetato, propionato e formiato que são derivados de ácidos com pKa > 2,26 e não observou-se reação para os íons trifluoracetato e ClO4- que possuem pKa(s) < 2,26. Também, foi estudada a reação de transferência de próton no estado excitado entre a sonda 2NOH e o íon acetato em D2O (KPT 2,1 x108 M-1 s-1), mostrando que a reação ocorre com participação de molécula(s) de solvente. Em soluções micelares de SB3-14 obteve-se kPT = 0,99 x 108 M-1 s-1, mostrando que a microviscosidade da micela dificulta as reações de transferência de prótons. Nas reações de transferência de prótons entre o íon H2PO4- e os ácidos 1-naftóico (1COOH) e 2-naftóico (2COOH) obtiveram-se, especificamente para o 2COOH um valor de kPT = 1,77 x 10-8 M-1 s-1, e, para o 1COOH o valor de kPT não foi quantificado, já que a reação procede numa escala de tempo menor que 1-2 nanosegundos (ns).
The addition of salts in zwiterionic micellar solutions promotes specific anion incorporation in the micellar surface. The incorporation results in an anionic character in the micelles which in turn electrostatically attracts ions H3O+ to the micellar surface. The order of incorporation follows the Hofmeister series ClO4-> Br-> Cl-> OH- and this effect is called the chameleon effect. In the present work was calculated the acid dissociation constants of 1-naphthol (1NOH, pKa*= 2.47 and pKa = 9.33) and 2-naphthol (2NOH, pKa* = 2.26 and pKa = pKa 9.71), to investigate changes in pH at the surfaces of nanostructured micellar aggregates formed by the zwiterionic surfactant N-tetradecyl-N,N-dimethylammonio-1-propanesulfonate, SB3-14. Changes of more than one pH unit at the micellar surface of SB3-14 were promoted by addition of 0.04 M NaClO4 and the results were compared with those in the presence of the anionic sodium dodecyl sulfate surfactant (SDS). Theoretical calculations of the probes 1NOH and 2NOH, showed that these probes become highly acidic in the excited state. Proton transfer reaction between the probe 2NOH * (excited state) and various organic anions such as acetate, propionate, formiate, trifluoroacetate and ClO4- were studied in water. The rate constant kPT = 3.8 x 108 M-1 s-1 was found for acetate, propionate and formate anions, all of which have pKa > 2,26 and, no reaction was detected for both trifluoracetate and ClO4-, which have pKa < 2,26. The rate constant for the proton transfer reaction in the excited state between acetate ion and 2NOH in D2O (kPT = 2.1 x108 M-1 s-1) is slower than the rate constant observed in water, showing that this reaction occurs with participation of the solvent. In micellar solutions of SB3-14, kPT = 0.99 x 108 M-1 s-1, showing that the microscopic viscosity of the SB3-14 micelle decreases the rate of the reaction. The proton transfer reaction between 2-naphthoic acid (2COOH) and the H2PO4- ion proceeds with kPT = 1.77 x10-8 M-1 s-1, and that of the 1COOH probe is still faster. The value of kPT could not be quantified because the temporal resolution (1-2 ns) is not sufficient to follow the reaction.
Chotikasemsri, Pongsathorn. "Computational Prediction of the Agregated Structure of Denatured Lysozyme". TopSCHOLAR®, 2009. http://digitalcommons.wku.edu/theses/120.
Miasojedovas, Arūnas. "Organinės optoelektronikos medžiagų fluorescencijos savybių valdymas formuojant molekulinius agregatus". Doctoral thesis, Lithuanian Academic Libraries Network (LABT), 2013. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2013~D_20130930_092139-05678.
Currently, organic electronics is one of the most expanding technology of semiconductor devices. This direction is rapidly developing due to the constant synthesis of new organic compounds and sophisticated advances in device engineering. Currently, organic materials are used in organic light-emitting diodes (OLEDs), organic thin-film transistors, solar cells and sensors. Low-cost manufacturing techniques such as wet casting or inkjet printing enable organic materials use in large-area and flexible electronic devices. Modern organic electronic materials are multifunctional – this enables not only to improve the material properties, but also to simplify the device architecture. However, the complexity of the molecular structure brings new problems associated with complex phenomena of the new multifunctional molecules -such as the formation of aggregates, intramolecular charge transfer, intramolecular torsion and others. Therefore, the control of the features of new multifunctional molecules is the main problem of organic electronics today. This work focuses on the control of photophysical characteristics of multifunctional organic emitters. Here we study aggregation induced emission and quenching of multifunctional molecular emitters and the possibilities to control these phenomena by optimizing functional properties of the film such as film forming properties, charge transfer, the emission efficiency, amplified spontaneous emission threshold and others.
Gée, Christelle. "Reactions chimiques isolees sur agregats de van der waals". Paris 11, 1997. http://www.theses.fr/1997PA112092.
Domps, André. "Dynamique electronique dans les agregats metalliques : methodes semi-classiques". Toulouse 3, 1998. http://www.theses.fr/1998TOU30220.
Kapičák, Daniel. "Agregace hlášení o bezpečnostních událostech". Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2016. http://www.nusl.cz/ntk/nusl-255432.
Zubov, Artem. "Filtrování a agregace síťového provozu". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-317132.
Alvarado, de Menéndez Clara Elena. "Comportamiento hidro-mecánico de agregados gruesos". Doctoral thesis, Universitat Politècnica de Catalunya, 2017. http://hdl.handle.net/10803/406090.
Las escolleras son materiales gruesos ampliamente utilizados en obras geotécnicas como por ejemplo en presas de materiales sueltos (espaldones, bloques de cuñas, repiés), así como en pedraplenes y todo-uno de obras ferroviarias. Estas estructuras están sometidas a cambios de humedad importantes y a la acción permanente del agua durante las distintas etapas constructivas y en el comportamiento a largo plazo post-construcción. A pesar de ser materiales gruesos son muy sensibles a la acción del agua, presentando deformaciones volumétricas de colapso por humedecimiento, así como deformaciones diferidas en el tiempo, que están asociadas con la rotura de partículas (propagación sub-crítica de fisuras) y su reacomodo posterior. Este estudio, de carácter eminentemente experimental, evalúa algunos aspectos importantes de estos agregados gruesos (gravas de pizarra de los espaldones de la presa de Lechago, Teruel) y su interacción con el agua. Particularmente se enfoca en las deformaciones volumétricas a largo plazo de estos materiales con énfasis en el tamaño de las partículas, el efecto de la historia y el valor actual de tensiones y succiones (relación de sobreconsolidación), del mismo modo que en el efecto del índice de poros (deformación volumétrica acumulada). Se han propuesto expresiones constitutivas fenomenológicas que toman en cuenta todos los aspectos anteriormente señalados y que permiten reproducir adecuadamente los resultados experimentales a largo plazo. Como alternativa al control de la succión total a través de la humedad relativa del vapor, esta investigación ha explorado el efecto de controlar la actividad del líquido (moléculas de agua disponibles para inducir la acción ambiental sobre la propagación de fisuras) en la respuesta hidráulica y mecánica de las gravas de pizarra. Se han desarrollado protocolos experimentales que han permitido inundar al esqueleto de gravas con diferentes soluciones salinas, además de realizar ensayos de rotura de partículas (ensayos de tracción indirecta). Estos ensayos han permitido comparar la cinética y las condiciones estacionarias de la respuesta del material y de la partícula cuando se controla la humedad relativa del vapor o alternativamente la actividad del líquido. Esta parte de la investigación se ha enfocado en la compresibilidad en edómetro de las gravas de pizarra ante carga a diferentes succiones, así como en los cambios de volumen a tensión vertical constante cuando se cambia la succión. Los resultados han mostrado una mayor compresibilidad y una menor resistencia a la tracción de las partículas cuando se controlaba la succión total mediante la actividad del líquido. Con el fin de interpretar los resultados, se ha propuesto una expresión constitutiva fenomenológica que corrige la succión total asociada con la actividad del líquido mediante un coeficiente reductor que depende de dicha actividad (equivalente a una eficiencia osmótica). La cinética de los procesos (difusión de vapor para humedad relativa y difusión de la concentración de soluto para la actividad) se ha simulado sobre una partícula cilíndrica con el programa acoplado CODE_BRIGHT, que ha incorporado una ley específica de resistencia a la tracción que varía con la succión total, así como parámetros de transporte de masa medidos en laboratorio. Adicionalmente, con el objeto de profundizar en el estudio de la resistencia al corte y la dilatancia inducida por los agregados granulares a diferentes succiones totales, se ha desarrollado una nueva célula triaxial. Este equipo permite ensayar muestras de hasta 200 x 400 mm con control de succión total y con un sistema novedoso de medidas radiales locales en dos planos ortogonales de la muestra a diferentes alturas. El equipo se ha calibrado y se presentan algunos ensayos preliminares, que servirán como base para investigaciones futuras sobre este tema
Rizzo, Giovanna Falzetta. "Durabilidade de concretos com agregados reciclados". Pontif?cia Universidade Cat?lica de Campinas, 2018. http://tede.bibliotecadigital.puc-campinas.edu.br:8080/jspui/handle/tede/1067.
Made available in DSpace on 2018-04-10T19:01:59Z (GMT). No. of bitstreams: 1 GIOVANNA FALZETTA RIZZO.pdf: 4328364 bytes, checksum: c9d6f46d59c6df71381b35bbaab4f27e (MD5) Previous issue date: 2018-02-26
Funda??o de Amparo ? Pesquisa do Estado de S?o Paulo - FAPESP
Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior - CAPES
Civil construction is one of the industries that most impact the environment. The extraction of natural resources, the cement production, the concrete production and the use of its components, beyond the reckless generation of construction, materials that are often discarded as ?rubble?, affects directly affect the environment, the society and cities. Construction waste is already used in many European countries as recycled aggregates for concrete mix with for structural purposes. In Brazil, its use is still restricted to concrete without structural function, because the characteristics of the recycled aggregates can increase the permeability of the concrete. Due to the high porosity of the recycled aggregate when compared to the natural ones, it is expected that the concrete produced with the recycled aggregate higher porosity and consequently, fluids and gases will be easier to penetrate inside, directly affecting the durability and the useful life of reinforced concrete structures. In order for recycled aggregates to be a possible substitute for natural aggregates in the concrete mix for structural purposes, this work aims to study the parameters that affect the durability, determining and comparing through laboratory tests the physical and mechanical characteristics of concrete produced with different types of recycled aggregate. Four different types of coarse aggregates were defined for the accomplishment of this work, natural (AN), concrete (ARCO), cement-based materials aggregate (ARCI) and treated cement-based materials aggregate and two levels of natural aggregate replacement by aggregates recycled, 20 and 30% were employed. The concretes were tested in the ages of 7, 28, 90, 180 days and after 180 days of immersion in saline solution. The physical and mechanical characteristics of the concretes were determined, as well as indirect measurements of durability, such determination of air permeability, chloride ion penetration, carbonation and migration of chloride ions. The results indicated that concrete using recycled concrete aggregate (ARCO) produced 100% of crushed concrete presented characteristics similar to conventional concrete, and that the increase in the substitution content of 20 to 30% did not cause significant loss in concrete characteristics. As for the cement-based materials aggregate (ARCI), the results obtained for concrete with 30% substitution content were higher than for the concrete produced with the substitution content of 20%, and when compared to the conventional concrete the results presented by both concretes were inferior. However, for the substitution content of 30% even the results being inferior to the conventional concrete it presented good mechanical behavior. The concretes produced with the treated cement-based materials aggregate (ARCI Treated) did not present better performance than those with cement-based materials aggregate (ARCI) for most of the characteristics evaluated indicating that the proposed treatment was not adequate.
A constru??o civil ? uma das ind?strias que mais causam impacto ao meio ambiente. A extra??o desenfreada dos recursos naturais, a produ??o de cimento, a produ??o de concreto e a utiliza??o dos seus componentes, al?m da gera??o imprudente dos res?duos de constru??o civil, materiais esses que muitas vezes s?o descartados como ?entulho? afeta diretamente o meio ambiente, ? sociedade e ?s cidades. Os res?duos de constru??o civil j? s?o utilizados em muitos pa?ses da Europa como agregados reciclados para a mistura de concreto com fins estruturais. No Brasil, a sua utiliza??o ainda ? restrita a concretos sem fun??o estrutural, devido ? grande variabilidade do agregado reciclado, e o que elas influenciam nas caracter?sticas do concreto e em sua durabilidade. Devido ? alta porosidade do agregado reciclado quando comparado ao agregado natural, espera-se que o concreto produzido com o agregado reciclado apresente maior porosidade. E, consequentemente, flu?dos e gases possuam maior facilidade em penetrar em seu interior, afetando diretamente a durabilidade e a vida ?til das estruturas de concreto armado. Para que seja poss?vel a amplia??o no campo de consumo dos agregados reciclados, este trabalho tem como objetivo estudar os par?metros que afetam a durabilidade, determinando e comparando atrav?s de ensaios laboratoriais as caracter?sticas f?sicas e mec?nicas de concretos produzidos com diferentes tipos de agregado reciclado. Foram definidos quatro diferentes tipos de agregados gra?dos para a realiza??o deste trabalho, o natural (AN), o de concreto (ARCO), o ciment?cio (ARCI) e o ciment?cio tratado (ARCI Tratado) e dois teores de substitui??o do agregado natural pelos agregados reciclado: 20 e 30%. Os tra?os de concreto foram ensaiados para as idades de 7, 28, 90, 180 dias e ap?s 180 dias de imers?o em solu??o salina. Foram determinadas as caracter?sticas f?sicas e mec?nicas dos concretos, al?m de ensaios de medi??o indireta da durabilidade, como a determina??o da permeabilidade ao ar, penetra??o de ?ons cloreto, carbonata??o e migra??o de ?ons cloreto. Os resultados obtidos demonstram que concreto utilizando o agregado reciclado de concreto (ARCO) produzido com 100% de concreto britado apresentou caracter?sticas similares ao concreto convencional, e que o aumento no teor de substitui??o de 20 para 30% n?o ocasionou perda significativa nas caracter?sticas do concreto. Quanto ao agregado ciment?cio (ARCI), os resultados obtidos para o tra?o com teor de substitui??o de 30% foram superiores daqueles com o tra?o produzido com o teor de substitui??o de 20%, e quando comparados ao concreto convencional os resultados apresentados para ambos os tra?os foram inferiores. Por?m, para o teor de substitui??o de 30% mesmo os resultados sendo inferiores ao concreto convencional foi obtido um bom comportamento mec?nico. Os concretos produzidos de agregado ciment?cio tratado (ARCI Tratado) n?o apresentaram melhor desempenho que os com agregado ciment?cio (ARCI) para a maioria das caracter?sticas avaliadas indicando que o tratamento proposto n?o foi adequado.
Nunes, Daniela Maria. "O desperdício alimentar nos agregados familiares". Master's thesis, Instituto Superior de Economia e Gestão, 2020. http://hdl.handle.net/10400.5/20661.
O tema de desperdício alimentar está ainda longe de ser suficientemente discutido. É um problema global que tem vindo a ganhar proporções preocupantes e que merece um atenção redobrada ao longo de toda a cadeia de valor. Apesar da consciência cada vez maior para uma vertente menos consumista e mais atenta ao desperdício, a verdade é que um terço da produção é desperdiçada ao longo da cadeia de aprovisionamento e a maior fatia é verificada no consumidor final, com 53% da "culpa". Por isso mesmo, decidiu-se investigar, através de uma análise qualitativa, os hábitos e rotinas dos agregados familiares, com o objetivo de encontrar possíveis causas que justificassem o desperdício nas suas casas. Os resultados apresentados no presente estudo foram conseguidos através de entrevistas semiestruturadas, com questões às rotinas e costumes dos entrevistados e respetivos agregados familiares. Foram ainda colocadas questões de reflexão sobre o tema, de forma a perceber as causas de desperdício e ações de combate ao mesmo.
Food waste issue is still far from being discussed. It is a global problem that has come to gain worrying proportions and deserves extra attention throughout the entire value chain. Despite the growing awareness of a less consumerist and more attentive to waste, the truth is that one third of production is wasted along the supply chain and the largest share is verified in the final consumer, with 53% of "fault" . For this reason, it was decided to investigate, through a qualitative analysis, the habits and routines of households, with the aim of finding possible ways that justified waste in their homes. The results disclosed in the present study were achieved through semi-structured changes, with questions to the routines and customs of the interviewees and their respective households. There are also questions for reflection on the theme, in a defined way as causes of waste and actions to combat it.
info:eu-repo/semantics/publishedVersion
Amarouche, Mohand. "Modelisation des agregats de gaz rares et dynamique d'ar : :(3)**(+)". Toulouse 3, 1988. http://www.theses.fr/1988TOU30135.
BENSLIMANE, MOHAMED. "Collisions agregats de van der waals surface aux energies thermiques". Palaiseau, Ecole polytechnique, 1995. http://www.theses.fr/1995EPXX0041.
Picard, Yan. "Dynamique de fragmentation induite par collision de petits agregats metalliques". Paris 11, 1999. http://www.theses.fr/1999PA112120.
Sá, Artur Domingues Tavares de 1985. "Nano-agregados metálicos = produção e propriedades magnéticas". [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/276993.
Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Fisica Gleb Wataghin
Made available in DSpace on 2018-08-23T00:51:37Z (GMT). No. of bitstreams: 1 Sa_ArturDominguesTavaresde_D.pdf: 7427611 bytes, checksum: 5f7375c13b84237cc30bec5c926f2f65 (MD5) Previous issue date: 2013
Resumo: Clusters, i.e. nanopartículas formadas por alguns átomos ou até 107, atraem grande interesse devido 'as propriedades peculiares que apresentam, como momento magnético aumentado, atividade catalítica, fluorescência dependente de tamanho e estruturas geométricas diferenciadas em relação ao material massivo. Isso acontece principalmente devido aos efeitos decorrentes da grande razão entre o número de átomos na superfície e o número de átomos no volume, e também por conta dos níveis discretos de energia devidos ao pequeno número de átomos presente nas estruturas. Entretanto, para que seja possível uma melhor compreensão dos mecanismos envolvidos em amostras compostas por clusters, 'e imprescindível que tenhamos um grande controle dos parâmetros cruciais como tamanho das partículas, concentração e energia de deposição. Para isso, desenvolvemos e construímos uma fonte para a produção de agregados com um número controlável de átomos, com a intenção de produzir partículas com 2 até 100 átomos. Um feixe de partículas 'e produzido, caracterizado e depositado em condições de ultra alto vácuo (UHV), utilizando-se uma fonte de clusters com magnéton sputtering. A fonte 'e baseada na proposta por Haberland et al. (1) com a inovadora introdução de um sputtering com geometria cilíndrica, com a intenção de aumentar a eficiência na criação de partículas bem como facilitar a produção de agregados de ligas. Uma fonte de clusters geralmente é constituída essencialmente de: uma fonte de átomos e uma câmara de agregação, para gerar as partículas; um sistema de lentes eletrostáticas, para guiar e focalizar o feixe; e um analisador de massa, podendo esse selecionar, ou não, as partículas em massa. Para fonte de átomos desenvolvemos dois magnéton sputterings, um magnéton circular plano típico de 1" e um magnéton cilíndrico para a erosão axial de fios metálicos. A câmara de agregação tem um comprimento variável (0-300 mm), para que possamos controlar o tamanho médio dos nano-agregados. Um skimmer, três lentes Einzel e uma Bessel-Box são utilizadas para guiar e focalizar o feixe de partículas ao longo do instrumento. Como analisador de massa, construímos um espectrômetro de massa por tempo de voo. É importante frisar que optamos por desenvolver a maioria dos componentes na própria Unicamp, estes componentes serão descritos no corpo dessa tese. O equipamento que se encontra operacional, já se mostrou capaz de produzir partículas com mais de 500 átomos, superando assim nossas expectativas iniciais. Apresentamos também a caracterização magnética de nanoestruturas granulares com nano-agregados de cobalto com 2,3 nm de diâmetro embebidos em matrizes de cobre com diferentes concentrações. A comparação dos resultados utilizando-se o triple fit e medidas de transporte mostra que apenas para baixa concentração (0,5 at.% Co) todos os experimentos são consistentes com a suposição de que as partículas são não-interagentes e a descrição teórica comumente utilizada é apropriada. Aumentando-se a concentração para 2,5 at.% e 5 at.% implica em desvios entre magnetometria e magneto-transporte
Abstract: Clusters, i.e. nano-particles formed by a few tens or up to 107 atoms, attract great interest due to their peculiar properties as enhanced magnetic moment and catalytic activity, size-specific fluorescence and non-bulky geometrical structures. This happens mainly due to effects arising from their high surface-to-bulk ratio and because of the discrete energy levels due to the small amount of atoms at these structures. However, in order to get a deeper understanding of the mechanisms taking place in cluster-assembled samples, it is fundamental to have a good control of crucial parameters such as clusters size, composition, concentration and deposition energy. In this way, we have developed and constructed a source to produce clusters with a controllable number of atoms intended to produce particles ranging from 2 up to 100 atoms. A beam of cluster ions is produced, characterized and deposited under ultra high vacuum (UHV) conditions, using a magnetron sputtering cluster source. This source is based on the design of Haberland et al. (1) with the innovative introduction of a cylindrical sputtering geometry that intends to increase the particle generation efficiency also to facilitate the production of alloy clusters. A usual clusters source is constituted essentially of an atom source and aggregation chamber, to generate the particles; electrostatic lenses, to guide them; and a mass analyzer, which may, or not, select the particles by mass. For the atom source we have designed two sputtering-like sources, a home-made 1" typical planar magnetron and also a home-made cylindrical one, for axial erosion of wire targets. The aggregation chamber has a variable length ( 0-300 mm), so we can control the average size of the clusters. A skimmer, three Einzel lenses and a Bessel-Box are used to guide charged cluster through the instrument. As mass analyzer we have built Time-Of-Flight mass spectrometer. It is important to say that we choose to build almost all the components at Unicamp, these components will be described in the body of this thesis. The equipment, which is operational, showed itself capable to produce particles with more than 500 atoms, exceeding our initial expectations. We also report on magnetic characterization of clusterassembled nanostructures with cobalt clusters with 2.3 nm diameter embedded in copper matrices at different concentrations. Results from the triple fit and transport measurements were compared and showed that only at low concentration (0.5 at % Co) all experiments are consistent with the non-interacting particles assumption and the common theoretical description is appropriate. Increasing the concentration to 2.5 at.% and 5 at.% implies deviations between magnetometry and magnetotransport
Doutorado
Física
Doutor em Ciências
Alves, Alexandre Patrão Neves. "Durabilidade de argamassas poliméricas de agregados leves". Master's thesis, Faculdade de Ciências e Tecnologia, 2010. http://hdl.handle.net/10362/4896.
O objectivo deste estudo é avaliar a durabilidade de argamassas poliméricas com agregados leves face a diversos agentes ambientais. Para este propósito, investigou-se o efeito de ciclos de molhagem-secagem em ambiente salino, com a molhagem em água salgada e secagem no interior de uma câmara climática. Além disso, avaliou-se o efeito de ciclos de molhagem-secagem em ambientes ácidos, utilizando-se ácido sulfúrico e ácido fórmico. Analisa-se neste trabalho o comportamento de quatro tipos de argamassas poliméricas à base de resinas epoxídicasnuma concentração de 85% em peso, e de agregados leves de dois tipos (pó de cortiça ou de borracha) numa concentração de 15%. Os ciclos de molhagem-secagem em ambiente salino consistiram em submeter os provetes a imersão de 2 horas em água salgada, 20 horas de secagem a 50 ºC e arrefecimento à temperatura ambiente durante 2 horas, perfazendo assim um ciclo com a duração de 24 horas. Os provetes foram retirados da câmara climática aos 60 ciclos e aos 120 ciclos nos quais foram avaliadas a perda de massa e de resistência. A investigação acerca do efeito dos ciclos de molhagem-secagem em ambiente com ácido sulfúrico, consistiu na imersão e secagem, durante 5 ciclos, de provetes em várias concentrações de ácido sulfúrico (5, 10, 15, 20 e 30%) durante 7 dias, seguida da secagem numa estufa durante 7 dias, sendo posteriormente pesados com a finalidade de avaliar a sua perda de massa. O efeito dos ciclos de molhagem-secagem em ácido fórmico foi avaliado imergindo os provetes numa solução de ácido fórmico com uma concentração de 10% efectuando o mesmo número de ciclos que foram realizados nos ensaios com ácido sulfúrico. No final de cada ciclo os provetes foram pesados e após 5º ciclo estes foram também ensaiados à compressão monotónica.
Hermann, Aline. "Empacotamento de agregados reciclados para concretos vibrocompactados". Universidade Tecnológica Federal do Paraná, 2016. http://repositorio.utfpr.edu.br/jspui/handle/1/1846.
Os agregados reciclados vêm sendo amplamente estudados e utilizados em diversos campos da engenharia civil. Dentre suas aplicações mais comuns pode-se citar: argamassas de revestimento, bases, sub-bases e subleito de pavimentos, elementos pré-moldados de concreto, obras de contenção e aterros. O principal fator que dificulta a utilização do agregado reciclado em concretos está relacionado à capa de argamassa aderida à superfície. Esta capa tem elevada porosidade e consequentemente elevada absorção de água, o que proporciona ao concreto, menor trabalhabilidade, além do aumento do consumo de superplastificantes e de água, que por sua vez aumenta o consumo de cimento a fim de garantir a resistência mecânica à compressão. Estes fatores elevam o custo do concreto. O empacotamento de partículas, entre outros aspectos, estuda a adequada distribuição granulométrica e morfologia das partículas, bem como a incorporação de aditivos e adições minerais de modo que o índice de vazios seja o menor possível e a trabalhabilidade ideal para o concreto com determinada aplicação. O ajuste adequado desses parâmetros permite um aumento da resistência mecânica à compressão do concreto com o mesmo consumo de cimento ou, mantém a resistência com redução no consumo de cimento. Assim, o objetivo deste trabalho é aplicar técnicas de empacotamento em agregados reciclados de concreto, a fim de avaliar a efetividade dessa ferramenta na definição de traços de concretos secos utilizados em blocos para pavimentação com resistência mecânica à compressão maior que 35 MPa. Para isso, os agregados reciclados da construção civil, produzidos por diferentes equipamentos de 4 diferentes empresas localizadas em um raio de 100 km da cidade de Curitiba – PR, foram caracterizados quanto a: morfologia, distribuição granulométrica, massa específica, massa unitária, índice de vazios, composição mássica e visual, além de absorção de água. Em seguida, foi escolhido o agregado que apresentou características físicas mais propícias ao melhor empacotamento, com base na morfologia, na distribuição granulométrica e nos valores de: absorção de água, massa unitária e específica. Escolhido o agregado aplicou-se dois modelos de empacotamento de partículas: o de Funk e Dinger (Alfred) de 1980 e o de De Larrard de 1999, com e sem a introdução do cimento na análise granulométrica. Com as proporções ideais dos agregados foi então estudado, por meio do consistômetro “VeBe”, a quantidade de água para cada traço de concreto. As composições que apresentaram os melhores resultados foram testadas quanto à absorção de água, resistência mecânica à compressão axial e à tração por compressão diametral e análise microestrutural por Microscópio Eletrônico de Varredura. Os concretos foram moldados por meio da mesma vibrocompactadora de laboratório utilizada por Lima (2009), a qual consiste de uma mesa vibratória e cilindros de aço aplicados sobre os moldes, para simular a força de compactação de vibrocompactadoras industriais. Dentro do desvio padrão considerado, o modelo de empacotamento de Funk e Dinger com a introdução do cimento na análise granulométrica apresentou os melhores resultados em relação a resistência à compressão aos 28 dias e em relação a absorção de água. Um tempo de vibrocompactação em laboratório equivalente ao de máquinas industriais foi determinado. Além disso, com o mesmo consumo de cimento, concretos com agregados reciclados alcançaram resistências mecânicas dentro do desvio padrão de concretos produzidos com agregados naturais, utilizados por indústrias de pré-moldados.
Recycled aggregates have been widely studied and used in some areas of civil engineering. Among its most common applications can include: revetment mortar, bases, sub-bases, and subgrade pavements, precast concrete elements, containment works and landfills. The main factor that hinders the use of recycled aggregate in concrete is related to the mortar layer adhered to the surface. This layer has high porosity and therefore high water absorption, which gives the concrete, lower workability, and increased content of superplasticizers and water, which in turn increases the consumption of cement in order to ensure the compressive strength. These factors increase the cost of the concrete. The particles packing, among other things, studying the proper particle size distribution and particle morphology, as well as the incorporation of additives and mineral additions such that the voids content is minimized and optimum workability to concrete with particular application. Proper adjustment of these parameters allows an increase mechanical strength of the concrete with the same cement content or, maintains the strength with reduction in the cement content. Thus, the objective of this work is to apply particles packing techniques in recycled concrete aggregates in order to evaluate the effectiveness of this tool in the dry concrete compositions used in paving blocks with compression mechanical strength to greater than 35 MPa. For this, the recycled concrete aggregates produced by different equipment of 4 different companies located within a radius of 100 km from the city of Curitiba - PR, were characterized for: morphology, particle size distribution, density, bulk density, void ratio, mass and visual composition and water absorption. Then, it was chosen the aggregate more favorable physical characteristics to the best packing, on the basis of morphology and the particle size analysis and the values of: water absorption, density and bulk density. Chosen the aggregate particles was applied to two packing packing models: Funk and Dinger (Alfred) of 1980 and De Larrard of 1999, with and without the introduction of cement in particle size distribution. With the ideal proportions of aggregates were then studied by means of consistometer "VeBe", the amount of water for each concrete mix. The compositions that showed the best results were tested for water absorption, mechanical resistance to axial compression, tensile strength by diametrical compression and microstructural analysis by Scanning Electron Microscope. The concrete was cast by the same laboratory vibro-compression machine used by Lima (2009), which consists of a vibrating table and steel rollers applied on the molds, to simulate the compaction force of industrial vibro-compression machine. Within the standard deviation considered the packing packing model of Funk and Dinger with the introduction of cement particle size analysis showed the best results with respect to compression strength at 28 days and for the absorption of water. A lab equivalent time of vibro-compression to industrial machines can be found and this time becomes greater when using recycled aggregates. Moreover, with the same consumption of cement concrete with recycled aggregates achieved mechanical strength within the standard deviation of concretes produced with natural aggregates used by precast industries.
Saraiva, Maria Inês Esteves. "Controlo de qualidade : agregados e obra rodoviária". Master's thesis, Universidade de Aveiro, 2009. http://hdl.handle.net/10773/2731.
O presente relatório de estágio apresenta uma abordagem aos sistemas de extracção, desmonte e transporte realizados na pedreira Iberobrita, SA, focalizando-se no controlo de qualidade do produto acabado e elaboração dos registos associado aos ensaios laboratoriais. No decorrer do estágio, houve ainda oportunidade, de contactar com a empresa construções Júlio Lopes, SA, através da realização de ensaios no controlo de qualidade de matérias-primas e trabalhos de terraplanagem e pavimentação, realizando para isso, ensaios em laboratório e um ensaio in situ. Como a empresa, Construções Júlio Lopes, SA possui uma central de misturas betuminosas, foi possível a elaboração de um estudo de uma mistura betuminosa em laboratório e o controlo do nível de conformidade da central de misturas betuminosas. ABSTRACT: The present report gives an account of the training in a limestone quarry. The report can be divided into two parts. In the first part the blasting, transports and the preparation of raw materials in descried. In the second part, relevant laboratory quality test (in according with European Standards) are described the results given and discussed. Finally, quality control of bituminous mixtures and of particular in situ test is.
Trindade, Bruno Andrade Hipólito. "Engenharia e gestão na produção de agregados". Master's thesis, Universidade de Aveiro, 2009. http://hdl.handle.net/10773/2732.
O trabalho que se segue refere-se ao relatório de estágio curricular por Bruno Andrade Hipólito Trindade, realizado na pedreira Vale do Boi, Agrepor e Agregados – Extracção de Inertes S. A. O relatório intitulado “Engenharia e Gestão na Produção de Agregados”, faz parte do mestrado integrado em Engenharia Geológica da Universidade de Aveiro. Tem como objectivos, abordar toda a temática que envolve a produção de agregados, desde a abertura até ao fecho de uma exploração a céu aberto, passando pelo método de exploração, tratamento e beneficiação do agregado assim como o controlo de qualidade, plano de monitorização e recuperação paisagística. Estou muito agradecido por todas as facilidades e apoio prestado na Agrepor e Agregados – Extracção de Inertes S. A. durante o meu projecto. ABSTRACT: The work here in presented is a report of the curricular training by Bruno Andrade Hipólito Trindade carried out in the Vale do Boi quarry, Agrepor e Agregados – Extracção de Inertes S. A.. The report entitled “Engineering and Management in the Production of Aggregates” is part of the integrated Master degree in Geological Engineering at the University of Aveiro. This work has as main objective to approach the thematic involved in the production of aggregates, from the opening to the closing stages of an open pit, including the exploitation method, treatment and beneficiation of the aggregate, quality control, the monitoring and landscape recovering project. I am very grateful to all the facilities and support provided in Agrepor e Agregados – Extracção de Inertes S. A., during my project.
Sandoval, Gersson Fernando Barreto. "Desempenho do concreto poroso com agregados sustentáveis". Universidade Estadual de Londrina. Centro de Tecnologia e Urbanismo. Programa de Pós-Graduação em Engenharia de Edificações e Saneamento, 2014. http://www.bibliotecadigital.uel.br/document/?code=vtls000197929.
Nowadays, one of the major problems related to urbanization process is soil sealing, it leads to a radical change on the hydraulic cycle It also contributes to floods, aquaplaning and outbreaks of diseases. In this sense, study of new materials became important in the attempt to solve these issues. The objective of the present work is to evaluate the mechanical and hydraulic performance of pervious concrete with sustainable aggregates. Basaltic aggregates were chosen as reference in this research. Slag aggregates, recycled ceramic and construction blocks waste aggregates were chosen as sustainable aggregates. Mixture design, in mass, of pervious concrete used was 1:3.26 with an approximate consumption of 420 kg/m3, water cement ratio of 0.34, without any additives or admixtures. Compressive and flexural strengths, voids (%), water permeability and abrasion were analyzed. In the case of permeability, two methods were used: falling and constant head permeameter. The results showed the slag aggregates with the best mechanical behavior, presenting compressive and flexo-traction strength in the order of 10.10 and 2.92 MPa, respectively. It was observed that for compressive strength the most important parameter is the nature of the aggregate and not granulometry. However, the percentage of fines had a great influence on the flexural strength. Regarding permeability, the predominant parameter was the percentage of voids, and recycle ceramic waste aggregates, with around 27 % of voids, presented the best results in the order of 15.2mm/s. In this sense, the usage of sustainable aggregates is a viable alternative in the production of pervious concrete.
Buttler, Alexandre Marques. "Concreto com agregados graúdos reciclados de concreto : influência da idade de reciclagem nas propriedades dos agregados e concretos reciclados". Universidade de São Paulo, 2003. http://www.teses.usp.br/teses/disponiveis/18/18134/tde-06082003-172935/.
The concrete residues show a large potential to be recycled when compared with other residues; however, the number of studies in Brazil is very small hindering the use of this material in structural dosage. By virtue of that, it was developed a theoretical-experimental study to characterize some properties of aggregate and recycled concrete; in the theoretical study it was explored aspects related to the generation, deposition, processes for recovery, crushing, practical cases, researches involving recycled of concrete and the existent normative recommendations. In the experimental development, it was analyzed the influence of the period elapsed between the molding and the recycling of the concrete in the properties of the aggregates and concretes. The results indicate that residues recycled soon after generation, these contribute positively to the mechanical properties of the concrete due to the existence of large amount of nonhydrated cement particles, such concretes obtained results superiors for the compression strenght and tensile strenght when compared to the concretes with natural aggregates.
Lepine, Franck. "Imagerie de photoelectrons, sonde de la dynamique: des atomes ... aux agregats". Phd thesis, Université Claude Bernard - Lyon I, 2003. http://tel.archives-ouvertes.fr/tel-00006433.
Calvayrac, Florent. "Dynamique non-lineaire des electrons de valence dans les agregats metalliques". Toulouse 3, 1998. http://www.theses.fr/1998TOU30003.
Cordan, Anne-Sophie, e Albert Villaeys. "Melanges d'ondes dans les dimeres et les agregats moleculaires : approche stochastique". Université Louis Pasteur (Strasbourg) (1971-2008), 1994. http://www.theses.fr/1994STR13119.
Gacoin, Thierry. "Agregats de metaux ou de semiconducteurs dans des matrices sol-gel". Paris 6, 1994. http://www.theses.fr/1994PA066126.
Olivka, Petr. "Stabilita hierarchické agregace pro internetové televizní vysílání". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218806.
Lendraitis, Mantas. "Prikabinamo agregato įtakos traktoriaus ratų apkrovai tyrimas". Master's thesis, Lithuanian Academic Libraries Network (LABT), 2014. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2014~D_20140616_132746-02477.
The main purpose for agricultural tractor is to make pulling actions in various conditions and on various surfaces. Tractor pulling force depends on tractor performances such as: wheel grip with surface and their slippage value, tractor traction force etc. These performances depends on tractor weight and on its vertical wheel loads. Seeking for the best tractor efficiency while doing agricultural work it is necessary to sum up static and dynamic loads effecting tractor. Chosen Master thesis is designed to investigate tractor wheel static load, when simulating implement pull with different hitching heights and angles. After the research it can be stated that the increasing pulling force with the direction opposite tractor movement, rear wheel loads increase, while front wheel loads decrease. While pulling force with horizontal angle is increased (turning to the left is simulated), left side wheel loads varies with greater values than loads of the right side wheel.
Vesna, Bulatović. "Sulfatna otpornost betona na bazi recikliranog agregata". Phd thesis, Univerzitet u Novom Sadu, Fakultet tehničkih nauka u Novom Sadu, 2017. https://www.cris.uns.ac.rs/record.jsf?recordId=104955&source=NDLTD&language=en.
This paper presents the experimental research results of the sulphate resistance ofconcrete with recycled aggregate. The research is based on a comparative analysis oftwo groups of concrete that differ in coarse aggregate types. Within these two concretegroups, two types of cement of the same class and two water/cement ratios have beenvaried. Sulphate resistance was examined after 3 and 6 months of immersion in 5%Na2SO4 and 5% MgSO4. Capillary water absorption, sample length change andcompressive strength were studied in hardened concrete and the followingmicrostructural analyzes were performed: MIP, SEM, BSE/EDS, XRD and FTIR. It hasbeen found that structural concrete with apppropriate mechanical properties as well aswith satisfactory durability from the aspect of sulphate corrosion can be obtained bycombination of a coarse recycled concrete aggregate and a binder of an appropriatemineralogical composition.
Sá, Artur Domingues Tavares de 1985. "Desenvolvimento de uma fonte de nano-agregados metálicos". [s.n.], 2009. http://repositorio.unicamp.br/jspui/handle/REPOSIP/277215.
Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Fisica Gleb Wataghin
Made available in DSpace on 2018-08-12T21:17:26Z (GMT). No. of bitstreams: 1 Sa_ArturDominguesTavaresde_M.pdf: 5943760 bytes, checksum: 7930052cb22d4d424d915c28be234091 (MD5) Previous issue date: 2009
Resumo: Nanossistemas são um dos campos de pesquisa mais importantes na comunidade científica nos dias atuais, isso se deve principalmente ao seu grande potencial tecnológico. Este regime de tamanhos apresenta propriedades novas e inesperadas que diferem fortemente das suas propriedades macroscópicas. Isso acontece principalmente devido aos efeitos decorrentes da razão entre o número de átomos na superfície e o número de átomos no volume, e também por que temos o tamanho da partícula comparável ao comprimento de onda dos elétrons de condução. Em particular, um destes sistemas de grande interesse são os clusters, nanossistemas com 2 a 10 7 átomos, onde as propriedades variam fortemente com tamanho e forma. Por conta disso, nós come¸ camos a desenvolver e construir uma fonte para a produção de agregados com um número controlável de átomos variando de 2 até 100 átomos. Uma fonte de clusters habitual é constituída essencialmente de: uma fonte de átomos e uma câmara de agregação, para gerar as partículas; um sistema de lentes eletrostáticas, para guiar e focalizar o feixe; e um analisador de massa, podendo esse selecionar, ou não, as partículas em massa. Para fonte de átomos desenvolvemos dois magnetrons sputterings, um magnetron circular plano típico de 1" e um magnetron cilíndrico para a erosão axial de fios metálicos. A câmara de agregação terá um comprimento variável ( » 30 - 100 mm), para que possamos controlar o tamanho médio dos nano-agregados. Um skimmer, duas lentes Einzel e uma Bessel-Box serão utilizados para guiar e focalizar o feixe de partículas ao longo do instrumento. Como analisador de massa utilizamos um espectrômetro de massa por tempo de vôo. É importante frisar que optamos por desenvolver a maioria dos componentes na própria Unicamp, estes componentes serão descritos no corpo dessa dissertação. Para estudos posteriores pretendemos implementar um quadrupolo elétrico seletor de massa e fazer a deposição dos clusters embebidos em uma matriz, o que possibilitará o transporte das partículas para o estudo ex situ de suas propriedades.
Abstract: Nanosystems are one of the most important fields of research in the current days, mainly motivated by their technological potential. This size regime present new and unexpected properties that strongly differ from their macroscopic counter-part. This happen mainly due to effects arising from their high surface-to-bulk ratio and because their sizes are comparable to the conduction electron wavelength. In particular, one of these systems of great interest is the atom clusters, nano-systems with 2 to 10 7 atoms, where properties vary strongly with particle size and shape. In this way, we have started to develop and construct a source to produce clusters with a controllable number of atoms ranging from 2 up to 100 atoms. A usual clusters source is constituted essentially of an atom source and aggregation chamber, to generate the particles; electrostatic lenses, to guide them; and a mass analyzer, which can also select the particles by mass. For the atom source we have designed two sputtering-like sources, a home-made one inch typical planar magnetron and also a home-made cylindrical one, for axial erosion of wire targets. The aggregation chamber will have a variable length ( » 30 - 100 mm), so we can control the average size of the clusters. A skimmer, two Einzel lenses and a Bessel-Box will be used to guide charged cluster through the instrument. As mass spectrometer we are going to use a home-made Time-Of-Flight (TOF). It is important to say that we choose to build almost all the components at Unicamp, these components will be described in the body of this dissertation. For further studies, the plan is to size select the clusters with an electrical quadrupole and deposit the clusters in a matrix (co-deposition), to be able to transport the samples to study their properties ex situ.
Mestrado
Física da Matéria Condensada
Mestre em Física
Lenzi, Amanda 1988. "Análise de curvas funcionais agregadas com efeitos aleatórios". [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/306187.
Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Matemática Estatística e Computação Científica
Made available in DSpace on 2018-08-22T12:21:05Z (GMT). No. of bitstreams: 1 Lenzi_Amanda_M.pdf: 1978923 bytes, checksum: 093900c4de8727a9c79d6afdfb0e3bd4 (MD5) Previous issue date: 2013
Resumo: Neste trabalho tratamos de um problema de dados funcionais agregados, isto é, combinações lineares de curvas aleatórias que não podem ser observadas individualmente. A análise de curvas de carga de transformadores elétricos em linha de distribuição é uma situação onde tais dados são encontrados. O conjunto de dados consiste de diversas curvas agregadas; assumimos que cada curva individual é a realização de um processo Gaussiano com curva média que é modelada através da expansão em bases B-splines. Além disso, assumimos que os coeficientes também são desconhecidos e temos somente uma estimativa de tais números. Nosso objetivo é utilizar os valores aproximados desses coeficientes, além das curvas agregadas, para estimar o valor real dos coeficientes, a curva típica de cada subpopulação e parâmetros de variância. Para este fim, diferentemente de trabalhos anteriores sobre o tema, propomos a utilização de um modelo de efeitos aleatórios
Abstract: In this paper, we deal with a problem of aggregated functional data, i.e. linear combinations of random curves, which cannot be seen individually. The analysis of load curves of electrical transformers in the distribution line is a situation where those data are found. The data set consists of several aggregated curves; we assume that each individual curve is the realization of a Gaussian process with the mean curve modeled through the expansion in B-splines basis. Furthermore, we assume that the coefficients are also unknown and we have only an estimate of such numbers. Our goal is to use the approximate coefficients and the aggregated curve data to estimate the true coefficients, the typical curve of each subpopulation and variance parameters. For this purpose, unlike previous works on the subject, we propose using a random effects model
Mestrado
Estatistica
Mestra em Estatística
Moreira, Kelvya Maria de Vasconcelos. "Concreto autoadensÃvel com agregados graÃdos reciclados de concreto". Universidade Federal do CearÃ, 2012. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=11616.
O Concreto AutoadensÃvel (CAA) possui propriedades intrÃnsecas que o distingue do atual concreto convencional. SÃo fatores como capacidade de autoadensamento, grande quantidade de finos e uso obrigatÃrio de aditivo superplastificante que tornam o CAA um material de elevado desempenho, favorÃvel para a durabilidade, sendo considerado uma evoluÃÃo na tecnologia do concreto e propenso a se tornar o concreto convencional do futuro. Por outro lado, o resÃduo originÃrio da prÃpria indÃstria da construÃÃo civil tem despertado sÃrias preocupaÃÃes para a comunidade, pois se trata de um resÃduo de difÃcil descarte e gerado em volumes cada vez mais crescentes, dado o crescimento econÃmico do PaÃs com consequente aumento do poder aquisitivo da populaÃÃo. Sob esta Ãtica, analisou-se o potencial de produÃÃo do CAA com substituiÃÃo do agregado graÃdo natural (AGN) por agregados reciclados oriundos da reciclagem de concreto, chamado de agregado graÃdo reciclado (AGR), nas porcentagens de 0%, 10%, 20% e 30%. Sabendo que o agregado reciclado, em geral, possui caracterÃsticas distintas do agregado natural, a metodologia empregada iniciou com o tratamento do AGR e caracterizaÃÃo fÃsica de todos os agregados (convencionais e reciclados). Efetuou-se, entÃo, o estudo de dosagem para as relaÃÃes a/c de 0,35, 0,45 e 0,55. ApÃs, estudaram-se um total de 12 traÃos de CAA para avaliaÃÃo de suas propriedades no estado fresco e no estado endurecido. Os ensaios no estado endurecido foram: resistÃncia à compressÃo axial aos 28 e 56 dias, mÃdulo de elasticidade aos 56 dias, absorÃÃo de Ãgua por imersÃo aos 28 dias, Ãndice de vazios aos 28 dias, massa especÃfica real aos 28 dias e profundidade de carbonataÃÃo natural aos 200 dias. Procedeu-se ao tratamento estatÃstico dos resultados pela anÃlise de variÃncia (ANOVA) com posterior modelagem matemÃtica e ANOVA do modelo proposto. Ao final, concluiu-se que o alto teor de aditivo superplastificante resultante do estudo de dosagem da relaÃÃo a/c mais baixa pode ter influenciado para a obtenÃÃo de concretos mais trabalhÃveis e menos suscetÃveis à incorporaÃÃo de um agregado mais poroso do que o agregado natural. TambÃm se concluiu que as propriedades dos CAA manufaturados foram afetadas mais significativamente pela relaÃÃo a/c, indicando a possibilidade de substituiÃÃo de maiores teores de AGN por AGR.
The self-compacting concrete (SCC) has intrinsic properties that distinguish it known current conventional concrete. It is factors like self-compacting capacity, high amount of fines and mandatory use of superplasticizer that make the SCC a material of high performance, favorable to the durability and is considered an evolution in concrete technology and prone to become the future conventional concrete. On the other hand, the residue originated in the construction industry itself has aroused serious concern to the community, because it is a residue difficult to discard. It is generated in ever-increasing volumes due to economic growth in the country with con sequent increase in power population's purchasing. From this perspective, we analyzed the production of SCC with replacement of natural coarse aggregate (NCA) for recycled aggregates from concrete recycling, called recycled coarse aggregate (RCA), in the percentages of 0%, 10%, 20% and 30%. Knowing that recycled aggregate, in general, has distinct characteristics of natural aggregate, the methodology started with the treatment of RCA and physical characterization of all aggregates (conventional and recycled). Then, it was done the dosage study with the w/c ratio of 0.35, 0.45 and 0.55. After, we studied a total of 12 mixtures of SCC to evaluate its properties in fresh and hardened state. The tests in the hardened state were: compressive strength at 28 and 56 days, modulus of elasticity at 56 days, water absorption by immersion at 28 days, content of voids at 28 days, specific gravity at 28 days and the depth of natural carbonation at 200 days. We proceeded to statistical processing of results by analysis of v ariance (ANOVA) followed by mathematical modeling and model‟s ANOVA. Finally, it was concluded that the high content of superplasticizer results from the dosage study of lower w/c ratio can be influenced to achieve concretes more workable and less sensitiv e to the incorporation of an aggregate more porous than the natural aggregate. It was also found that the properties of the SCC manufactured were affected more significantly by the w/c ratio, indicating the possibility of substitution of higher levels of NCA by RCA
Antonio, Giomal Aparecido. "Dinâmica molecular aplicada à agregados e vidros calcogenetos". Universidade de São Paulo, 1989. http://www.teses.usp.br/teses/disponiveis/54/54131/tde-10032015-110018/.
We applied the molecule dynamics (MD) technique using a three-body interaction potential in order to investigate the stability and energetics of Ge micro-clusters. The results are in good agreement with the photo-fragmentation experiment, in which the magic numbers 6 and 10 were found as the most stable fragments. We also studied the chalcogenide glass SiSe2, through the same technique. Structural correlations ranging from short to medium-range order were investigated. The calculated static structure factor is in excellent agreement with neutron measurements. The amorphous states consist of distorted Si(Se4)1/2 tetrahedral, 53% of which are edge-sharing (E-S) and the remaining share corners. A small fraction (≈ 5%) of the E-S tetrahedral are the building blocks of chain-like fragments that extended up to 10Å. From the statistics of rings and fragments, we found that chain-like fragments occur predominantly in 9-fold or larger rings
Gasperini, Bruno Outa. "Crédito e empreendedorismo: confrontando eventos agregados e microdados". Universidade de São Paulo, 2010. http://www.teses.usp.br/teses/disponiveis/12/12138/tde-28072010-145842/.
While microeconomists show a positive correlation between entrepreneurship and wealth, macroeconomists emphasize that there is a negative correlation between entrepreneurship and development (wealth accumulation). This work presents a model that brings together these two apparently conflicting facts. Departing from a standard entrepreneurship setup, as in Evans and Jovanovic (1989), our model adds a market clearing condition in the labor market. This addition to the standard model allows for the coexistence of these two correlations of opposite directions. Such negative correlation between entrepreneurship and development can be obtained even when development is generated by relaxing the credit constraint. The model predicts that the proportion of entrepreneurs decreases for the rich and that entrepreneurship can increase for the poor. Further, it is shown that such predictions are consistent with recent Brazilian data.
Castro, Bruno Miguel Santos. "Marcação CE de agregados e de pedra natural". Master's thesis, Universidade de Aveiro, 2006. http://hdl.handle.net/10773/4721.
Durante décadas a industria extrativa viveu esteve apenas interessada em produzir muito a baixos custos, sem no entanto se preocupar com questões ambientais, de segurança e qualidade dos materiais. Mas a grande mudança está a ocorrer com a implementação da Directiva dos Produtos de Construção e com o sistema de Marcação CE. Esta directiva, foi aprovada em 1989 (Directiva 89/106/CEE, de 21 de Dezembro de 1988 e modificada pela directiva 93/68/CEE, de 22 de Julho de 1993, de 10 de Abril), surgiu para evitar as barreiras impostas à livre circulação de produtos de construção, no seio da comunidade Europeia. Esta medida acaba por constituir uma inegável mais valia para os produtos nacionais, uma vez que, para além de facilitar a comercialização no seio da União Europeia, por outro lado induz a procura dos produtos certificados em detrimento dos que não possuem esta marcação. Entre esse produtos temos as pedras naturais e os agregados, susceptíveis de aproveitamento e valorização, encontrando-se repartidos em Portugal um pouco por todo o território, sendo de realçar o seu contributo para a criação de riqueza e desenvolvimento do País, proporcionando ao sector a necessária sustentabilidade. Neste contexto pretende-se com este trabalho apresentar a aplicação da metodologia utilizada na marcação CE de duas pedras naturais, ambas calcários, provenientes do Maciço Calcário Estremenho e de agregados de diferentes granulometrias. Para o efeito, são analisadas as condicionantes impostas pela marcação CE, para a pedra natural com as normas harmonizadas EN 1341:2004 - Lajes de pedra natural para pavimentos exteriores e a EN 1342:2004 - Calçada de pedra natural para pavimentos exteriores para a pedra natural e para os agregados com as normas harmonizadas NP EN 13450:2003 – Agregados para balastro de via férrea e a EN 12620:2002 – Agregados para betão. Neste âmbito foram realizados diversos ensaios cujos resultados e significado são discutidos tendo em vista a sua comercialização.
The extractive industry for several decades lived only interested in produce a great deal at lower costs, without considerate environment issues and the material quality and security. But great changes are occurring with the implementation of Construction Product Directive and with the system of CE Marking. This directive was approve in 1989 (Directive 89/106/CEE, from 21 of December of 1988 and changed by the directive 93/68/CEE, from 22 of July of 1993, from April 10), appear to prevent the barriers imposed to the free circulation of products inside the European community. This measure is of a great deal of importance for the national products, once, it eases the commercialization inside the European community, and induces the search for certificated products instead the products that don’t have it. The natural stones and the aggregates are between those, and are distributed all over the Portuguese territory, being of enhance is contribute to the development and prosperity of the Country, providing the necessary sustainability to the sector. In this context, this research intends to present the methodology adopted in CE marking of two natural stones, both limestone, proceeding from the “Estremenho” limestone rockmass, and several gradings aggregates. Four harmonized norms were applied in this research: EN 1341:2004 – Slabs of natural stone for external pavements and EN 1342:2004 – Setts of natural stone for external paving, both for natural stone, and NP EN 13450:2003 – Aggregates for railway ballast and EN12620:2002 – Aggregates for concrete. Several characterization tests were made and the results are presented and interpreted with the main goal to show its usefulness for commercialization.
Granadeiro, Carlos Miguel Cardeal Enes. "Polioxometalatos: dos agregados moleculares a redes e materiais". Doctoral thesis, Universidade de Aveiro, 2010. http://hdl.handle.net/10773/3613.
Esta dissertação teve como objectivo principal a preparação de novos materiais luminescentes contendo lantanopolioxometalatos. Foram utilizados polioxometalatos (POMs) do tipo Keggin, Wells-Dawson e [Ln(M5O18)2]9- com M (VI) = W, Mo contendo diferentes iões lantanídeo. Foram sintetizados materiais híbridos orgânico-inorgânicos com base em lantanopolioxometalatos e ligandos orgânicos. O efeito da coordenação destes ligandos orgânicos na luminescência dos iões lantanídeo (efeito de antena) foi investigado para os ácidos picolínico e 3-hidroxipicolínico. Os estudos de fotoluminescência destes materiais permitiram mostrar a existência de um processo de sensitização da emissão dos iões lantanídeo através de fenómenos de transferência de energia dos ligandos e do POM para o centro emissor. No caso particular dos materiais híbridos contendo POMs do tipo Wells-Dawson, a introdução do ligando orgânico levou à intensificação da absorção de energia através do POM, a qual era praticamente inexistente nos correspondentes lantanopolioxometalatos. Prepararam-se nanocompósitos do tipo “core/shell” contendo POMs e híbridos orgânico-inorgânicos como núcleo rodeados por uma camada de sílica. Os nanocompósitos preparados apresentam uma estrutura “core/shell” bem definida com um diâmetro médio de aproximadamente 35 nm. As técnicas de microscopia electrónica, nomeadamente o mapeamento por EDX, permitiram confirmar a presença dos POMs no núcleo das nanopartículas de sílica. A biofuncionalização destes nanocompósitos com um anticorpo foi estudada, com vista à potencial aplicação destes sistemas como biomarcadores ópticos. Os estudos de microscopia de fluorescência permitiram observar a emissão do Eu3+ presente nas nanopartículas biofuncionalizadas com o anticorpo, utilizando excitação na zona do ultravioleta. Estes resultados reforçam a viabilidade da aplicação destes sistemas como marcadores celulares em alternativa a “quantum dots” e corantes orgânicos. No âmbito dos nanomateriais, foi também preparado um material constituído por partículas de Na9[Eu(W5O18)2] de dimensões nanométricas, utilizando micelas invertidas como nanoreactores, de forma a limitar o tamanho das partículas. Foi realizada a preparação de novos materiais lamelares luminescentes por intercalação de POMs e respectivos materiais híbridos em argilas aniónicas de zinco e alumínio. A intercalação foi realizada através de um método de troca aniónica directa usando uma argila contendo nitrato como anião precursor. O estudo por difracção de raios-X revelou-se uma técnica fundamental na caracterização destes materiais, nomeadamente através da determinação da altura de galeria. A partir deste parâmetro foi possível verificar a orientação da espécie intercalada na argila. No caso da intercalação do anião do tipo Keggin, o estudo por RMN de 31P MAS permitiu identificar a espécie intercalada na argila. As propriedades de luminescência foram estudadas para a generalidade dos novos materiais preparados.
The main goal of this thesis was the preparation of new luminescent materials with lanthanopolyoxometalates. The polyoxometalates (POMs) used were the Keggin, Wells-Dawson-types and [Ln(M5O18)2]9- with M (VI) = W, Mo, containing different lanthanide ions. Organic-inorganic hybrid materials based on lanthanopolyoxometalates and organic ligands were synthesized. The effect of these ligands coordination on the luminescence of the lanthanide ions (antenna effect) was investigated for the picolinic and 3-hydroxipicolinic acids. Photoluminescence studies on these materials allowed to show the presence of a sensitization process of the lanthanide ions emission through energy transfer from the ligands and the POM to the emitting center. In the particular case of the hybrid materials containing the Wells-Dawson-type POMs, the incorporation of the organic ligand lead to the enhancement of the energy absorption through the POM, which was almost non-existent in the corresponding lanthanopolyoxometalates. Core/shell-type nanocomposites bearing POMs and organic-inorganic hybrids as the nucleus surrounded by a silica shell were prepared. The nanocomposites prepared exhibit a well-defined core/shell structure with an average diameter of approximately 35 nm. The electronic microscopy techniques, namely the EDX mapping, allowed to confirm the presence of POMs in the nucleus of the silica nanoparticles. The biofunctionalization of these nanocomposites with an antibody was performed, aiming at the potential application of these systems as optical biolabels. Fluorescence microscopy studies allowed to observe emission from the Eu3+ present in the nanoparticles biofunctionalized with the antibody, using excitation in the ultraviolet region. These results emphasize the viability of the application of these systems as cellular labels as an alternative to quantum dots and organic dyes. In the scope of nanomaterials, a material composed by particles of Na9[Eu(W5O18)2] with nanometric dimensions was also prepared, using reverse micelles as nanoreactors to restrain the size of the particles. The preparation of new luminescent lamellar materials was achieved through the intercalation of POMs and corresponding hybrid materials in zinc-aluminium anionic clays. The intercalation was performed by a direct anionic exchange method using a clay containing nitrate as the precursor anion. The X-ray diffraction study turned out to be an essential technique in the characterization of these materials, in particular through the determination of the gallery height. This parameter allowed to check the orientation of the intercalated species inside the clay. In the intercalation with the Keggin-type anion, it was possible to identify the intercalated species in the clay by 31P MAS NMR. The luminescence properties of the majority of the new prepared materials were studied.
FCT - SFRH/BD/30137/2006