Articoli di riviste sul tema "Additive manufacturing (FDM)"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Additive manufacturing (FDM)".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Beniak, Juraj, Peter Krizan e Milos Matus. "CONDUCTIVE MATERIAL PROPERTIES FOR FDM ADDITIVE MANUFACTURING". MM Science Journal 2020, n. 1 (4 marzo 2020): 3846–51. http://dx.doi.org/10.17973/mmsj.2020_03_2019135.
Di Angelo, L., P. Di Stefano e A. Marzola. "Surface quality prediction in FDM additive manufacturing". International Journal of Advanced Manufacturing Technology 93, n. 9-12 (24 luglio 2017): 3655–62. http://dx.doi.org/10.1007/s00170-017-0763-6.
Ch, Manoj,. "A REVIEW ON ADDITIVE MANUFACTURING (AM) MATERIAL - STATISTICS AND COMPARISIONS". INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 08, n. 05 (5 maggio 2024): 1–5. http://dx.doi.org/10.55041/ijsrem32619.
Siraj, Imran, e Pushpendra S. Bharti. "Assessing quality in extrusion based additive manufacturing technologies". Journal of Information and Optimization Sciences 45, n. 1 (2024): 25–46. http://dx.doi.org/10.47974/jios-1137.
Skawiński, Piotr, Przemysław Siemiński e Piotr Błazucki. "Applications of additive manufacturing (FDM method) in the manufacturing of gear". Mechanik, n. 12 (dicembre 2015): 976/173–976/179. http://dx.doi.org/10.17814/mechanik.2015.12.582.
Boyard, Nicolas, Olivier Christmann, Mickaël Rivette, Olivier Kerbrat e Simon Richir. "Support optimization for additive manufacturing: application to FDM". Rapid Prototyping Journal 24, n. 1 (2 gennaio 2018): 69–79. http://dx.doi.org/10.1108/rpj-04-2016-0055.
Cuan-Urquizo, Enrique, Mario Martínez-Magallanes, Saúl E. Crespo-Sánchez, Alfonso Gómez-Espinosa, Oscar Olvera-Silva e Armando Roman-Flores. "Additive manufacturing and mechanical properties of lattice-curved structures". Rapid Prototyping Journal 25, n. 5 (10 giugno 2019): 895–903. http://dx.doi.org/10.1108/rpj-11-2018-0286.
Parandoush, Pedram, Palamandadige Fernando, Hao Zhang, Chang Ye, Junfeng Xiao, Meng Zhang e Dong Lin. "A finishing process via ultrasonic drilling for additively manufactured carbon fiber composites". Rapid Prototyping Journal 27, n. 4 (5 maggio 2021): 754–68. http://dx.doi.org/10.1108/rpj-10-2019-0260.
Chen, Jian-Ming, Demei Lee, Jheng-Wei Yang, Sheng-Han Lin, Yu-Ting Lin e Shih-Jung Liu. "Solution Extrusion Additive Manufacturing of Biodegradable Polycaprolactone". Applied Sciences 10, n. 9 (3 maggio 2020): 3189. http://dx.doi.org/10.3390/app10093189.
Hernandez-Contreras, Adriana, Leopoldo Ruiz-Huerta, Alberto Caballero-Ruiz, Verena Moock e Hector R. Siller. "Extended CT Void Analysis in FDM Additive Manufacturing Components". Materials 13, n. 17 (30 agosto 2020): 3831. http://dx.doi.org/10.3390/ma13173831.
Georgopoulou, Antonia, Lukas Egloff, Bram Vanderborght e Frank Clemens. "A Sensorized Soft Pneumatic Actuator Fabricated with Extrusion-Based Additive Manufacturing". Actuators 10, n. 5 (10 maggio 2021): 102. http://dx.doi.org/10.3390/act10050102.
Dama Y. B. "Application of Nonlinear Analysis in Evaluating Additive Manufacturing Process for Engineering Design Features: A Study and Recommendations". Communications on Applied Nonlinear Analysis 31, n. 1s (16 maggio 2024): 94–105. http://dx.doi.org/10.52783/cana.v31.559.
Behseresht, Saeed, e Young Ho Park. "Additive Manufacturing of Composite Polymers: Thermomechanical FEA and Experimental Study". Materials 17, n. 8 (20 aprile 2024): 1912. http://dx.doi.org/10.3390/ma17081912.
Wang, Yanen, Ray Tahir Mushtaq, Ammar Ahmed, Ammar Ahmed, Mudassar Rehman, Mudassar Rehman, Aqib Mashood Khan et al. "Additive manufacturing is sustainable technology: citespace based bibliometric investigations of fused deposition modeling approach". Rapid Prototyping Journal 28, n. 4 (25 ottobre 2021): 654–75. http://dx.doi.org/10.1108/rpj-05-2021-0112.
Ben hadj Hassine, Salem, Sami Chatti, Borhen Louhichi e Abdennour Seibi. "Experimental Study of the Tensile Behavior of Structures Obtained by FDM 3D Printing Process". Polymers 16, n. 11 (31 maggio 2024): 1562. http://dx.doi.org/10.3390/polym16111562.
Cicala, Gianluca, Alberta Latteri, Barbara Del Curto, Alessio Lo Russo, Giuseppe Recca e Silvia Farè. "Engineering Thermoplastics for Additive Manufacturing: A Critical Perspective with Experimental Evidence to Support Functional Applications". Journal of Applied Biomaterials & Functional Materials 15, n. 1 (26 gennaio 2017): 10–18. http://dx.doi.org/10.5301/jabfm.5000343.
Alzyod, Hussein, e Peter Ficzere. "Correlation Between Printing Parameters and Residual Stress in Additive Manufacturing: A Numerical Simulation Approach". Production Engineering Archives 29, n. 3 (28 agosto 2023): 279–87. http://dx.doi.org/10.30657/pea.2023.29.32.
Patterson, Albert E., Charul Chadha e Iwona M. Jasiuk. "Identification and Mapping of Manufacturability Constraints for Extrusion-Based Additive Manufacturing". Journal of Manufacturing and Materials Processing 5, n. 2 (10 aprile 2021): 33. http://dx.doi.org/10.3390/jmmp5020033.
Asadollahi-Yazdi, Elnaz, Julien Gardan e Pascal Lafon. "Multi-objective optimization approach in design for additive manufacturing for fused deposition modeling". Rapid Prototyping Journal 25, n. 5 (10 giugno 2019): 875–87. http://dx.doi.org/10.1108/rpj-07-2018-0186.
Rasselet, Damien, Anne-Sophie Caro-Bretelle, Aurélie Taguet e José-Marie Lopez-Cuesta. "Reactive Compatibilization of PLA/PA11 Blends and Their Application in Additive Manufacturing". Materials 12, n. 3 (5 febbraio 2019): 485. http://dx.doi.org/10.3390/ma12030485.
Ding, Huan, Congyuan Zeng, Jonathan Raush, Kasra Momeni e Shengmin Guo. "Developing Fused Deposition Modeling Additive Manufacturing Processing Strategies for Aluminum Alloy 7075: Sample Preparation and Metallographic Characterization". Materials 15, n. 4 (11 febbraio 2022): 1340. http://dx.doi.org/10.3390/ma15041340.
Kim, Eunseob, Yong-Jun Shin e Sung-Hoon Ahn. "The effects of moisture and temperature on the mechanical properties of additive manufacturing components: fused deposition modeling". Rapid Prototyping Journal 22, n. 6 (17 ottobre 2016): 887–94. http://dx.doi.org/10.1108/rpj-08-2015-0095.
Abouzaid, Khaoula, Sofiane Guessasma, Sofiane Belhabib, David Bassir e Abdelkrim Chouaf. "Thermal mechanical characterization of copolyester for additive manufacturing using FDM". International Journal for Simulation and Multidisciplinary Design Optimization 10 (2019): A9. http://dx.doi.org/10.1051/smdo/2019011.
Chaudhari, Madhuri, Bhagwan F. Jogi e R. S. Pawade. "Comparative Study of Part Characteristics Built Using Additive Manufacturing (FDM)". Procedia Manufacturing 20 (2018): 73–78. http://dx.doi.org/10.1016/j.promfg.2018.02.010.
Koizumi, Satoru, Takehiro Kawamura e Tatsuya Mochizuki. "Study on CAM Software for Additive Manufacturing with FDM Method". International Journal of Automation Technology 11, n. 5 (30 agosto 2017): 835–43. http://dx.doi.org/10.20965/ijat.2017.p0835.
Rinaldi, Marianna, Tommaso Ghidini, Federico Cecchini, Ana Brandao e Francesca Nanni. "Additive layer manufacturing of poly (ether ether ketone) via FDM". Composites Part B: Engineering 145 (luglio 2018): 162–72. http://dx.doi.org/10.1016/j.compositesb.2018.03.029.
Paterson, Abby Megan, Richard Bibb, R. Ian Campbell e Guy Bingham. "Comparing additive manufacturing technologies for customised wrist splints". Rapid Prototyping Journal 21, n. 3 (20 aprile 2015): 230–43. http://dx.doi.org/10.1108/rpj-10-2013-0099.
Wang, Shushu, Rakshith Badarinath, El-Amine Lehtihet e Vittaldas Prabhu. "Evaluation of Additive Manufacturing Processes in Fabrication of Personalized Robot". International Journal of Automation Technology 11, n. 1 (5 gennaio 2017): 29–37. http://dx.doi.org/10.20965/ijat.2017.p0029.
FICĂ, Sorin Alexandru, Andrei DIMITRESCU e Claudiu BABIȘ. "Additive Manufacturing Through 3D Printing FDM-Fused Deposit Modeling of Top Cover". Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science 46, n. 2 (15 giugno 2023): 28–32. http://dx.doi.org/10.35219/mms.2023.2.05.
Tsao, Che-Chih, Ho-Hsin Chang, Meng-Hao Liu, Ho-Chia Chen, Yun-Tang Hsu, Pei-Ying Lin, Yih-Lin Chou et al. "Freeform additive manufacturing by vari-directional vari-dimensional material deposition". Rapid Prototyping Journal 24, n. 2 (12 marzo 2018): 379–94. http://dx.doi.org/10.1108/rpj-01-2017-0014.
Martins, Rui F., Ricardo Branco, Filippo Berto, Nuno Soares e Sebastião Bandeira. "Structural Integrity of Polymeric Components Produced by Additive Manufacturing (AM)—Polymer Applications". Polymers 13, n. 24 (16 dicembre 2021): 4420. http://dx.doi.org/10.3390/polym13244420.
T., Sathies, Senthil P. e Anoop M.S. "A review on advancements in applications of fused deposition modelling process". Rapid Prototyping Journal 26, n. 4 (30 gennaio 2020): 669–87. http://dx.doi.org/10.1108/rpj-08-2018-0199.
Ahmed, Bilal Anjum, Uzair Nadeem, Abbas Saeed Hakeem, Anwar Ul-Hamid, Mohd Yusuf Khan, Muhammad Younas e Hasan Aftab Saeed. "Printing Parameter Optimization of Additive Manufactured PLA Using Taguchi Design of Experiment". Polymers 15, n. 22 (10 novembre 2023): 4370. http://dx.doi.org/10.3390/polym15224370.
Borille, Anderson Vicente, Jefferson de Oliveira Gomes e Daniel Lopes. "Geometrical analysis and tensile behaviour of parts manufactured with flame retardant polymers by additive manufacturing". Rapid Prototyping Journal 23, n. 1 (16 gennaio 2017): 169–80. http://dx.doi.org/10.1108/rpj-09-2015-0130.
Faizaan, Mirza, Satish Shenoy e Chandrakant R. Kini. "Tensile and Flexural Performance of Hybrid FDM and Compression Moulded PLA/Basalt Biocomposite". Materials Science Forum 1120 (18 aprile 2024): 77–84. http://dx.doi.org/10.4028/p-duyo7m.
Schmitt, Matt, Raj Mattias Mehta e Il Yong Kim. "Additive manufacturing infill optimization for automotive 3D-printed ABS components". Rapid Prototyping Journal 26, n. 1 (6 gennaio 2020): 89–99. http://dx.doi.org/10.1108/rpj-01-2019-0007.
Faludi, Jeremy, Cindy Bayley, Suraj Bhogal e Myles Iribarne. "Comparing environmental impacts of additive manufacturing vs traditional machining via life-cycle assessment". Rapid Prototyping Journal 21, n. 1 (19 gennaio 2015): 14–33. http://dx.doi.org/10.1108/rpj-07-2013-0067.
Gotkhindikar, Nitin, Parshwa Mehta, Shrutika Londhe, Anushka Kulkarni e Maithili Rekhe. "A Novel FDM Based Additive Manufacturing of PLA Components Using Optimized Deep Learning Strategy". International Journal for Research in Applied Science and Engineering Technology 10, n. 4 (30 aprile 2022): 1042–49. http://dx.doi.org/10.22214/ijraset.2022.41436.
Chang, Gaoyuan, Xiaoxun Zhang, Fang Ma, Cheng Zhang e Luyang Xu. "Printing, Debinding and Sintering of 15-5PH Stainless Steel Components by Fused Deposition Modeling Additive Manufacturing". Materials 16, n. 19 (23 settembre 2023): 6372. http://dx.doi.org/10.3390/ma16196372.
Qin, Qin, Jigang Huang e Jin Yao. "A real-time adaptive look-ahead speed control algorithm for FDM-based additive manufacturing technology with Hbot kinematic system". Rapid Prototyping Journal 25, n. 6 (8 luglio 2019): 1095–107. http://dx.doi.org/10.1108/rpj-11-2018-0291.
Stöckli, Fritz, Fabio Modica e Kristina Shea. "Designing passive dynamic walking robots for additive manufacture". Rapid Prototyping Journal 22, n. 5 (15 agosto 2016): 842–47. http://dx.doi.org/10.1108/rpj-11-2015-0170.
Behseresht, Saeed, Allen Love, Omar Alejandro Valdez Pastrana e Young Ho Park. "Enhancing Fused Deposition Modeling Precision with Serial Communication-Driven Closed-Loop Control and Image Analysis for Fault Diagnosis-Correction". Materials 17, n. 7 (22 marzo 2024): 1459. http://dx.doi.org/10.3390/ma17071459.
Wan, Qia, Youjian Xu e Can Lu. "A fundamental study of parameter adjustable additive manufacturing process based on FDM process". MATEC Web of Conferences 189 (2018): 05001. http://dx.doi.org/10.1051/matecconf/201818905001.
Khan, Shaheryar Atta, Bilal Ahmed Siddiqui, Muhammad Fahad e Maqsood Ahmed Khan. "Evaluation of the Effect of Infill Pattern on Mechanical Stregnth of Additively Manufactured Specimen". Materials Science Forum 887 (marzo 2017): 128–32. http://dx.doi.org/10.4028/www.scientific.net/msf.887.128.
Liu, Jikai, Jingjing Yan e Huangchao Yu. "Stress-constrained topology optimization for material extrusion polymer additive manufacturing". Journal of Computational Design and Engineering 8, n. 3 (29 maggio 2021): 979–93. http://dx.doi.org/10.1093/jcde/qwab028.
Beniak, Juraj, Ľubomír Šooš, Peter Križan, Miloš Matúš e Vít Ruprich. "Resistance and Strength of Conductive PLA Processed by FDM Additive Manufacturing". Polymers 14, n. 4 (10 febbraio 2022): 678. http://dx.doi.org/10.3390/polym14040678.
Cunico, Marlon Wesley Machado, Miriam Machado Cunico, Patrick Medeiros Cavalheiro e Jonas de Carvalho. "Investigation of additive manufacturing surface smoothing process". Rapid Prototyping Journal 23, n. 1 (16 gennaio 2017): 201–8. http://dx.doi.org/10.1108/rpj-11-2015-0176.
Farina, Ilenia, Narinder Singh, Francesco Colangelo, Raimondo Luciano, Giulio Bonazzi e Fernando Fraternali. "High-Performance Nylon-6 Sustainable Filaments for Additive Manufacturing". Materials 12, n. 23 (28 novembre 2019): 3955. http://dx.doi.org/10.3390/ma12233955.
Çevik, Ümit, e Menderes Kam. "A Review Study on Mechanical Properties of Obtained Products by FDM Method and Metal/Polymer Composite Filament Production". Journal of Nanomaterials 2020 (20 novembre 2020): 1–9. http://dx.doi.org/10.1155/2020/6187149.
Ulkir, Osman, Mehmet Said Bayraklılar e Melih Kuncan. "Raster Angle Prediction of Additive Manufacturing Process Using Machine Learning Algorithm". Applied Sciences 14, n. 5 (29 febbraio 2024): 2046. http://dx.doi.org/10.3390/app14052046.