Letteratura scientifica selezionata sul tema "3D thermal surface"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "3D thermal surface".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Articoli di riviste sul tema "3D thermal surface":
Khodaei, B., F. Samadzadegan, F. Dadras Javan e H. Hasani. "3D SURFACE GENERATION FROM AERIAL THERMAL IMAGERY". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XL-1-W5 (11 dicembre 2015): 401–5. http://dx.doi.org/10.5194/isprsarchives-xl-1-w5-401-2015.
Li, Ya Yun, Jongwon Kim, Yunquan Sun e Yanhua Yang. "Thermomechanical Analytical 3D Thermal/Stress Estimation Sidewall Grinding Model". Journal of Manufacturing Science and Engineering 121, n. 3 (1 agosto 1999): 378–84. http://dx.doi.org/10.1115/1.2832692.
Chen, Yongjun, e Tubing Yin. "Digital Fracture Surface Morphology and Statistical Characteristics of Granite Brazilian Tests after Non-Steady-State Thermal Disturbance". Mathematics 12, n. 5 (24 febbraio 2024): 670. http://dx.doi.org/10.3390/math12050670.
Gutierrez, Evelyn, Benjamín Castañeda, Sylvie Treuillet e Ivan Hernandez. "Multimodal and Multiview Wound Monitoring with Mobile Devices". Photonics 8, n. 10 (2 ottobre 2021): 424. http://dx.doi.org/10.3390/photonics8100424.
Grechi, Guglielmo, Matteo Fiorucci, Gian Marco Marmoni e Salvatore Martino. "3D Thermal Monitoring of Jointed Rock Masses through Infrared Thermography and Photogrammetry". Remote Sensing 13, n. 5 (4 marzo 2021): 957. http://dx.doi.org/10.3390/rs13050957.
Paraschiv, Alexandru, Gheorghe Matache, Cristian Puscasu e Raluca Condruz. "Non-Contact Roughness Investigation of Ball-Cratered Molybdenum Thermal Spray Coatings". Applied Mechanics and Materials 859 (dicembre 2016): 9–14. http://dx.doi.org/10.4028/www.scientific.net/amm.859.9.
Han, Pu, Sihan Zhang, Zhong Yang, M. Faisal Riyad, Dan O. Popa e Keng Hsu. "In-Process Orbiting Laser-Assisted Technique for the Surface Finish in Material Extrusion-Based 3D Printing". Polymers 15, n. 9 (8 maggio 2023): 2221. http://dx.doi.org/10.3390/polym15092221.
Dadras Javan, F., e M. Savadkouhi. "THERMAL 3D MODELS ENHANCEMENT BASED ON INTEGRATION WITH VISIBLE IMAGERY". ISPRS - International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences XLII-4/W18 (18 ottobre 2019): 263–69. http://dx.doi.org/10.5194/isprs-archives-xlii-4-w18-263-2019.
Matringe, Caroline, Elsa Thune, René Guinebretière e David Babonneau. "Self-ordering on vicinal surfaces studied by 3D GISAXS measurements". Acta Crystallographica Section A Foundations and Advances 70, a1 (5 agosto 2014): C879. http://dx.doi.org/10.1107/s2053273314091207.
Dlouhá, Ž., M. Vostřák, J. Duliškovič, I. Zetková e T. Mařík. "Adhesion of selected thermally sprayed coatings on additive manufactured maraging steel". Journal of Physics: Conference Series 2572, n. 1 (1 agosto 2023): 012006. http://dx.doi.org/10.1088/1742-6596/2572/1/012006.
Tesi sul tema "3D thermal surface":
Wang, Xue. "Thermal Resistance Of Surface Modified, Dispersion Controlled CNT Foams". University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1460425184.
Bayareh, Mancilla Rafael. "Towards a Tool for Diabetic Foot Diagnosis using a 3D Modeling Based on Thermographic and Visible Spectrum Images". Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0142.
Medical infrared thermography is a quantitative method for identifying irregular temperatures for medical diagnosis. Because abnormal body temperature is a natural sign of illness, this modality's data can be used to detect disease or physiological abnormalities, such as diabetic foot which is the subject of this thesis According to the International Diabetes Federation, nearly half a million people were diagnosed with diabetes mellitus in 2019. Peripheral neuropathy may affect 40 % to 60 % of individuals because of diabetic foot issues. Amputation below the knee joint as a preventive operation is a common risk among these individuals, and it is estimated that one amputation occurs every 30 seconds around the world. Currently, MRI, radiography, and thermography, together with image processing techniques, are among the medical imaging modalities utilized to diagnose the diabetic foot early. Medical infrared thermography, on the other hand, is a non-contact, non-invasive, and non-ionizing passive approach. Infrared imaging of the diabetic foot is still mostly reliant on 2D images that only show a portion of the anatomy. In this scenario, a 3D thermal model would allow for better observation and inspection of the region of interest, which includes the plantar, lateral, and dorsal areas. The use of 3D modeling for the diagnosis of the diabetic foot has been documented in a few articles at the publication of this thesis.The proposed method employs a series of merged infrared and visible spectrum images as data input for the 3D point cloud estimation and surface reconstruction, based on Structure from Motion and Multi-view Stereo methods. However, segmentation in thermal images is a task that remains manually performed since the detection of descriptive features is almost impossible in false-color images. Therefore, this thesis presents an automatic segmentation method based on the processing of radiometric information before generating a false-color image. Radiometric data processing is an alternative to digital image processing due to the feasibility to remove thermal interferences (e.g. lamp, thermal shadows, or even patient body parts) based on temperature threshold criteria, improving color contrast, and segmenting the region of interest, and combine onto visible spectrum images.The fused multimodal images were used as input information for the estimation of the 3D surface of the foot. The obtained model was provided with a temperature scale related to the radiometric data obtained by each volunteer, as well as the possibility to rotate the model to observe each viewpoint. The findings show that the 3D multimodal model is feasible, allowing for better and faster visualization of temperature distribution during diabetic foot diagnosis. The contribution of this thesis concerns the acquisition of a 3D model with thermal information and automatic segmentation in thermal images for multimodal fusion. The perspective is the clinical validation to pilot test the assistance in the diagnosis of diabetic foot. However, from the experimental/theoretical perspective, it is contemplated to study the accuracy of image registration with the proposed method of automatic segmentation, and the thermal and spatial accuracy of the 3D models carried out with phantoms
Hlubinka, David. "Teplotní vlastnosti automobilových zdrojů světla - Halogenové zdroje". Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2017. http://www.nusl.cz/ntk/nusl-318096.
Leong, Hoi Liong, C. L. Gan, Kin Leong Pey, Carl V. Thompson e Hongyu Li. "Effects of Applied Loads, Effective Contact Area and Surface Roughness on the Dicing Yield of 3D Cu Bonded Interconnects". 2005. http://hdl.handle.net/1721.1/29818.
Singapore-MIT Alliance (SMA)
Libri sul tema "3D thermal surface":
Horing, Norman J. Morgenstern. Random Phase Approximation Plasma Phenomenology, Semiclassical and Hydrodynamic Models; Electrodynamics. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198791942.003.0010.
Capitoli di libri sul tema "3D thermal surface":
Saha, Arka Prabha, Siva Teja Kakileti, Ronak Dedhiya e Geetha Manjunath. "3D-BreastNet: A Self-supervised Deep Learning Network for Reconstruction of 3D Breast Surface from 2D Thermal Images". In Artificial Intelligence Over Infrared Images for Medical Applications (AIIIMA 2023), 32–44. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-44511-8_2.
Zeng, Tongyan, Essam F. Abo-Serie, Manus Henry e James Jewkes. "Thermal Optimisation Model for Cooling Channel Design Using the Adjoint Method in 3D Printed Aluminium Die-Casting Tools". In Springer Proceedings in Energy, 333–40. Cham: Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-30960-1_31.
Rudack, Maximilian, Iris Raffeis, Frank Adjei-Kyeremeh, Sayan Chatterjee, Uwe Vroomen, Andreas Bührig-Polaczek, Marie-Noemi Bold et al. "Material Solutions to Increase the Information Density in Mold-Based Production Systems". In Internet of Production, 1–17. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-030-98062-7_21-1.
Rudack, Maximilian, Iris Raffeis, Frank Adjei-Kyeremeh, Sayan Chatterjee, Uwe Vroomen, Andreas Bührig-Polaczek, Marie-Noemi Bold et al. "Material Solutions to Increase the Information Density in Mold-Based Production Systems". In Internet of Production, 153–69. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-44497-5_21.
Gholami, Mansoureh, Daniele Torreggiani, Alberto Barbaresi e Patrizia Tassinari. "Smart Green Planning for Urban Environments: The City Digital Twin of Imola". In Smart Cities, 133–50. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-35664-3_10.
Shukla, Kaustubh Kumar, T. Muthumanickam e T. Sheela. "Effects of Thermally Induced Deformations and Surface Radiosity for 3D Heat Transfer and Its Applications". In Lecture Notes in Mechanical Engineering, 449–57. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-7909-4_41.
Bard, Joshua, Dana Cupkova, Newell Washburn e Garth Zeglin. "Thermally Informed Robotic Topologies: Profile-3D-Printing for the Robotic Construction of Concrete Panels, Thermally Tuned Through High Resolution Surface Geometry". In Robotic Fabrication in Architecture, Art and Design 2018, 113–25. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-92294-2_9.
"Aerogels Utilizations in Batteries". In Aerogels II, 99–120. Materials Research Forum LLC, 2021. http://dx.doi.org/10.21741/9781644901298-6.
Fatoba, Olawale Samuel, Abimbola Patricia Idowu Popoola, Gabriel Ayokunle Farotade e Sisa Lesley Pityana. "Computational Dynamics of Laser Alloyed Metallic Materials for Improved Corrosion Performance". In Advances in Civil and Industrial Engineering, 197–235. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-5225-0329-3.ch008.
Mejia, Guilherme Lourenço. "Solid Rocket Motor Internal Ballistics Simulation Considering Complex 3D Propellant Grain Geometries". In Energetic Materials Research, Applications, and New Technologies, 146–69. IGI Global, 2018. http://dx.doi.org/10.4018/978-1-5225-2903-3.ch007.
Atti di convegni sul tema "3D thermal surface":
Prakash, Surya, Pei Yean Lee e Terry Caelli. "3D Mapping of Surface Temperature Using Thermal Stereo". In 2006 9th International Conference on Control, Automation, Robotics and Vision. IEEE, 2006. http://dx.doi.org/10.1109/icarcv.2006.345342.
Pradere, Christophe, Marie-Marthe Groz, Emmanuelle Abisset-Chavanne, Anissa Meziane e Alain Sommier. "3D reconstruction of thermal volumetric sources from surface temperature fields measured by infrared thermography". In Thermosense: Thermal Infrared Applications XLII, a cura di Beate Oswald-Tranta e Joseph N. Zalameda. SPIE, 2020. http://dx.doi.org/10.1117/12.2557734.
Jerchel, Kathleen, e Tadatomo Suga. "Influence of geometric pattern design and surface roughness on thermal performance of copper to copper bonding". In 2017 5th International Workshop on Low Temperature Bonding for 3D Integration (LTB-3D). IEEE, 2017. http://dx.doi.org/10.23919/ltb-3d.2017.7947469.
Yang, Yujie, e Thomas Weyrauch. "Line-scan, fiber-based confocal sensing for surface characterization and thermal distribution monitoring in selective laser melting systems". In Laser 3D Manufacturing XI, a cura di Bo Gu e Hongqiang Chen. SPIE, 2024. http://dx.doi.org/10.1117/12.3003059.
Tillmann, W., W. Luo e U. Selvadurai. "3D Wear Analysis of Thermal Spray Coatings". In ITSC2013, a cura di R. S. Lima, A. Agarwal, M. M. Hyland, Y. C. Lau, G. Mauer, A. McDonald e F. L. Toma. ASM International, 2013. http://dx.doi.org/10.31399/asm.cp.itsc2013p0487.
Kim, Dong Uk, Chan Bae Jeong, Jung Dae Kim e Ki Soo Chang. "Sub-surface Thermal Imaging of Microelectronic Devices using Confocal Laser Scanning Thermoreflectance Microscopy". In 3D Image Acquisition and Display: Technology, Perception and Applications. Washington, D.C.: OSA, 2018. http://dx.doi.org/10.1364/3d.2018.jm4a.16.
Kabir, I. R., D. Yin e S. Naher. "3D thermal model of laser surface glazing for H13 tool steel". In PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY AND AWAM INTERNATIONAL CONFERENCE IN CIVIL ENGINEERING (IGNITE-AICCE’17): Sustainable Technology And Practice For Infrastructure and Community Resilience. Author(s), 2017. http://dx.doi.org/10.1063/1.5008152.
Prakash, Surya, Pei Yean Lee, Terry Caelli e Tim Raupach. "Robust thermal camera calibration and 3D mapping of object surface temperatures". In Defense and Security Symposium, a cura di Jonathan J. Miles, G. Raymond Peacock e Kathryn M. Knettel. SPIE, 2006. http://dx.doi.org/10.1117/12.668459.
Bussmann, M., S. D. Aziz, S. Chandra e J. Mostaghimi. "3D Modelling of Thermal Spray Droplet Splashing". In ITSC 1998, a cura di Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p0413.
Sooudi, E., V. Ahmadi, M. Ebnali Heidari e M. Soroosh. "Static Quasi 3D Thermal Simulation of Ion Implanted Vertical Cavity Surface Emitting Lasers". In 2006 IEEE International Conference on Semiconductor Electronics. IEEE, 2006. http://dx.doi.org/10.1109/smelec.2006.381057.
Rapporti di organizzazioni sul tema "3D thermal surface":
Burks, Thomas F., Victor Alchanatis e Warren Dixon. Enhancement of Sensing Technologies for Selective Tree Fruit Identification and Targeting in Robotic Harvesting Systems. United States Department of Agriculture, ottobre 2009. http://dx.doi.org/10.32747/2009.7591739.bard.