Bibliographies thématiques / Wire-temperature

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences
Rapports d'organisations

Littérature scientifique sur le sujet « Wire-temperature »

Auteur : Grafiati

Publié le 9 mars 2023

Mis à jour le 10 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Wire-temperature ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Wire-temperature"

OBARA, Haruki, Seiji ADACHI et Tsuyoshi OHSUMI. « An Attempt to Measure a Wire Temperature Distribution on Wire EDM. 2nd Report : Averaged Wire Temperature during EDM. » Journal of The Japan Society of Electrical Machining Engineers 31, n^o 68 (1997) : 18–25. http://dx.doi.org/10.2526/jseme.31.68_18.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Yang, Leigang, Jisong Sun et Weiguo Wang. « Design and application of double stove wires high-temperature furnace in high-temperature creep rupture test ». Journal of Physics : Conference Series 2418, n^o 1 (1 février 2023) : 012059. http://dx.doi.org/10.1088/1742-6596/2418/1/012059.

Texte intégral

Résumé :

Abstract This paper presented a high-temperature furnace with double electric stove wires for the test of high-temperature creep rupture, adopted the 5 mm electric stove wire in diameter, and the wires are made up of the working stove wire and the alternate stove wire. When the tester system detects the working stove wire is fractured, it will automatically and quickly switch the power supply circuit from the working stove wire to the alternate stove wire. Then the alternate stove wire starts to heat to keep the high-temperature furnace working, reducing the loss caused by the interruption of the test on account of the fractured stove wire. Experimental result indicates that the high-temperature furnace with double electric stove wires can solve the problem that when the stove wire is fractured, the test is difficult to proceed for a long time and high-temperature creep rupture test with the classical high-temperature furnace. Besides, the 5 mm in diameter electric stove wire can also meet the temperature control on the ultra-high-temperature (such as 1200 °C) Creep test.

Styles APA, Harvard, Vancouver, ISO, etc.

El-Domiaty, Aly, et Sadek Z. Kassab. « Temperature rise in wire-drawing ». Journal of Materials Processing Technology 83, n^o 1-3 (novembre 1998) : 72–83. http://dx.doi.org/10.1016/s0924-0136(98)00045-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Rodin, V. V., et I. I. Tolmacheva. « DETERMINATION OF TUNGSTEN WIRE TEMPERATURE ». Современные наукоемкие технологии (Modern High Technologies) 1, n^o 12 2022 (2022) : 52–56. http://dx.doi.org/10.17513/snt.39436.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Yao, Chun Yan, Zong Hua Xu, Wei Zhang, Qiao Fang Zhang et Wei Peng. « Experimental Study on Temperature during Wire Saw Slicing ». Applied Mechanics and Materials 481 (décembre 2013) : 153–57. http://dx.doi.org/10.4028/www.scientific.net/amm.481.153.

Texte intégral

Résumé :

Heat generated during wire saw slicing can cause silicon temperature raise and make silicon wafer warpage, especially for larger silicon wafers. In order to study the wire saw effect on silicon temperature during slicing process, three kinds of wire saw, mainly semi-fixed abrasive wire saw and traditional wire saw, are applied for slicing silicon ingot. In this paper, the thermocouple is used to measure the temperature of the silicon during wire saw slicing. The experiment results show that the temperature of the silicon increases along with the wire saw working direction and reaches maximum value near the outlet position of silicon. The temperature of the silicon sliced by semi-fixed abrasive wire saw is lower than that sliced by traditional wire saw.

Styles APA, Harvard, Vancouver, ISO, etc.

Ni, Jun, et Hong Ming Gao. « Effect of the Wire Temperature on the Weld Formation in GMAW ». Advanced Materials Research 652-654 (janvier 2013) : 2289–92. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.2289.

Texte intégral

Résumé :

An arc-preheating wire GMAW process is proposed in this paper. The welding wire is preheated by a TIG arc to enhance the wire melting. As a result, the welding current is decrease. So the improved GMAW process is aimed at high efficiency welding with a low level heat input. In this paper, the welding system is designed. The wire temperature is measured by a pyrometer. The preheating current effect on the wire temperature is analyzed. In addition, the influence of the wire temperature on the weld current and weld formation are analyzed compared with conventional GMAW. The results show that the preheated wire can significantly enhance the wire melting. By increasing the temperature of the welding wire, the welding current decrease and the heat input of the base metal reduce accordingly. The shallow penetration and large reinforcement height are obtained at the arc-preheating wire GMAW process.

Styles APA, Harvard, Vancouver, ISO, etc.

Jo, H. H., S. K. Lee, M. A. Kim et B. M. Kim. « Pass schedule design system in the dry wire-drawing process of high carbon steel ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture 216, n^o 3 (1 mars 2002) : 365–73. http://dx.doi.org/10.1243/0954405021520030.

Texte intégral

Résumé :

Recently, high-speed drawing has become very common because of the increase in customer demands and production rate in real industrial fields. In the high-carbon steel wire-drawing process, the wire temperature rises greatly according to the increase in the final drawing speed. The rapid temperature rise makes the wire more embrittled and finally leads to wire breakage. Therefore, in this paper, an approximate wire temperature estimation method is proposed to control the maximum temperature rise in the wire-drawing process. Using these results, it is possible to develop the isothermal pass schedule programme, to design the wire-drawing process. Also, the conventional pass schedule can be redesigned by considering the pass schedule constraints. As a result, the wire temperature was considerably reduced and the productivity of the final product could be improved by about 11 per cent.

Styles APA, Harvard, Vancouver, ISO, etc.

Lee, Sang Kon, Won Ho Hwang, Dae Cheol Ko, Byung Min Kim et Woo Sik Ko. « Pass Schedule of Wet-Wire Drawing Process with Ultra High Speed for Tire Steel Cord ». Key Engineering Materials 340-341 (juin 2007) : 683–88. http://dx.doi.org/10.4028/www.scientific.net/kem.340-341.683.

Texte intégral

Résumé :

High speed multi pass wet wire drawing has become very common for production of high carbon steel cord because of the increase in customer demand and production rates in real industrial fields. Although the wet wire drawing is preformed at a high speed usually above 1000 m/min, greater speed is required to improve productivity. However, in the high carbon steel wire drawing, the wire temperature rises greatly as the drawing speed increase. The excessive temperature rise makes the wire more brittle and finally leads to wire breaks. In this study, the variations in wire temperature during wet wire drawing process were investigated. A multi pass wet wire drawing process with 21 passes, which was used to produce steel cord, was redesigned by considering the increase in temperature. Through a wet wire drawing experiment, it was possible to increase the maximum final speed from 1000 m/min to 2000 m/min.

Styles APA, Harvard, Vancouver, ISO, etc.

Takahashi, Hidemi, Mitsuru Kurita, Hidetoshi Iijima et Seigo Koga. « Simplified Calibration Method for Constant-Temperature Hot-Wire Anemometry ». Applied Sciences 10, n^o 24 (18 décembre 2020) : 9058. http://dx.doi.org/10.3390/app10249058.

Texte intégral

Résumé :

This study proposes a unique approach to convert a voltage signal obtained from a hot-wire anemometry to flow velocity data by making a slight modification to existing temperature-correction methods. The approach was a simplified calibration method for the constant-temperature mode of hot-wire anemometry without knowing exact wire temperature. The necessary data are the freestream temperature and a set of known velocity data which gives reference velocities in addition to the hot-wire signal. The proposed method was applied to various boundary layer velocity profiles with large temperature variations while the wire temperature was unknown. The target flow velocity was ranged between 20 and 80 m/s. By using a best-fit approach between the velocities in the boundary layer obtained by hot-wire anemometry and by the pitot-tube measurement, which provides reference data, the unknown wire temperature was sought. Results showed that the proposed simplified calibration approach was applicable to a velocity range between 20 and 80 m/s and with temperature variations up to 15 °C with an uncertainty level of 2.6% at most for the current datasets.

Styles APA, Harvard, Vancouver, ISO, etc.

Hwang, Joong-Ki, et Young-Chul Chang. « Effects of Contact Conditions at Wire–Die Interface on Temperature Distribution during Wire Drawing ». Processes 11, n^o 2 (8 février 2023) : 513. http://dx.doi.org/10.3390/pr11020513.

Texte intégral

Résumé :

The effects of contact conditions at the wire–die interface on the temperature distribution of the specimen and die are investigated to understand the wire drawing process. Finite element analysis and experiments are performed to analyze the temperature distribution of a drawn wire and die based on different contact conditions using a low-carbon steel wire. The maximum temperature (Tmax) of the die decreases as the contact heat transfer coefficient at the wire–die interface increases, whereas that of the wire increases with the contact heat transfer coefficient. The Tmax of the die and wire decreases with the thermal conductivity of the die. As the thermal conductivity of the die increases, the heat generated by friction is rapidly absorbed into the die, and the Tmax of the die decreases, thus resulting in a decrease in the surface temperature of the wire. The Tmax of both the die and wire linearly increases with the friction factor. In particular, the Tmax of the die more sensitively changes with the friction factor compared with that of the wire. The Tmax of the die linearly increases with the drawing velocity, whereas that of the wire parabolically increases with the drawing velocity. The influence of bearing length on the temperature increase in both the wire and die is insignificant.

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Wire-temperature"

Sitter, Nicholas James. « Two-wire, low component count soil temperature sensor ». Thesis, University of Iowa, 2011. https://ir.uiowa.edu/etd/1081.

Texte intégral

Résumé :

A two-wire, low component count soil temperature sensor was developed. The sensor uses one wire for ground and the other wire is used for both power and communication. Pulse width modulation is used to send temperature measurements to the master, where the duty cycle is proportional to the temperature. The sensor parasitically powers itself from the bidirectional data line. In order to reduce the number of components necessary, a microcontroller with an internal temperature sensor is used. Finally, the sensor can receive data from the master on the bidirectional communication line, which is used for calibrating the sensor.

Styles APA, Harvard, Vancouver, ISO, etc.

Suman, Shivesh K. « Characterization of temperature variation during the wire bonding process ». Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/17560.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Medrano, Téllez Alexis G. « Fibre laser metal deposition with wire : parameters study and temperature control ». Thesis, University of Nottingham, 2010. http://eprints.nottingham.ac.uk/12812/.

Texte intégral

Résumé :

This research addresses the development of a laser metal deposition process with wire feeding and melt pool temperature control. The system consists of a2 kW fibre laser, a CNC table, a wire feeder and a temperature monitoring and control system. A study of the influence of the main parameters on the process and on the deposited bead geometry was performed. The parameters analysed were: laser power, traverse speed and wire feed rate. As a result of this study, a process window was established for metal deposition of stainless steel 308LSi (wire) on stainless steel 304 (plate). The influence of the parameters on the bead geometry (height and width) was analysed applying the Design of Experiments methodology, using a full factorial design 3k. The results are presented, together with important practical considerations for laser metal deposition with wire. A closed-loop temperature control system was developed: it controls the melt pool temperature by means of modifying the laser power. The melt pool temperature was measured by a two-colour pyrometer, whereas a single-colour pyrometer was used for monitoring the workpiece (upper layer) temperature. A model of the melt pool was derived from a heat balance equation. It was then utilized for the design of the controller in the discrete domain, using the root locus method. The control algorithm was developed in LabVIEW software and executed in a computer. The control system was implemented successfully and was utilized to build single-bead walls and cylinders of stainless steel 308LSi. The study performed on the parameters and the developed temperature controller proved to be very effective tools to facilitate the transition to the deposition of titanium alloy Ti-6A1-4V, requiring only minimum adaptations. Single-bead walls and cylinders were also built in this material. Stable and smooth metal deposition was achieved for both materials. During the experiments, several strategies for the automation of wire metal deposition of multilayered structures were developed. Finally, mechanical tests were performed. The mechanical properties of the deposited materials are comparable to those in wrought (annealed) condition and to similar alloys made by laser powder deposition systems. The system developed in this work provides a means to perform stable and smooth wire metal deposition, achieving good mechanical properties. It also facilitates the transition to deposit different materials. It has a flexible structure and can be expanded or adapted to be used in other wire metal deposition systems.

Styles APA, Harvard, Vancouver, ISO, etc.

Chan, Yu Hin. « Optimization of metallization and process variables in low temperature wire bonding technology / ». View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?MECH%202003%20CHAN.

Texte intégral

Résumé :

Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2003.
Includes bibliographical references (leaves 129-132). Also available in electronic version. Access restricted to campus users.

Styles APA, Harvard, Vancouver, ISO, etc.

D'AMICO, ANTONIO. « INNOVATIVE ANALOG AND MIXED-SIGNAL SOLUTIONS FOR PRECISE MEASUREMENT OF ELECTRICAL QUANTITIES IN POWER TRANSISTORS ». Doctoral thesis, Università degli Studi di Milano-Bicocca, 2018. http://hdl.handle.net/10281/198966.

Texte intégral

Résumé :

Questa tesi presenta lo sviluppo di un sistema multifunzionale a segnali misti per applicazioni automobilistiche e, in particolare, per misure di corrente high-side, rilevamento di distacco dei carichi e protezione da sollecitazioni termoelettriche. Il sistema è composto di un ADC a inseguimento con diversa risoluzione (meno fine, fine e finissima) in tre intervalli per adattarsi ai requisiti di sistema e ottimizzare il design in termini di area. La risoluzione meno fine, usata per l’intero intervallo di valori d’ingresso di corrente [0A: 100A], ha fornisce 5 b e viene utilizzata per la funzione di rilevamento dello stress. Le risoluzioni fine e finissima sono utilizzate per i valori di corrente d’ingresso più bassi [0A: 14A] dove è richiesta una maggiore precisione della misura. Inoltre, il sistema implementa due funzionalità di protezione: è in grado di rilevare un eventuale distacco del carico elaborando le misure di corrente ed è in grado di stimare la temperatura del filo elaborando digitalmente l'uscita ADC e di segnalare se i cavi si riscaldano pericolosamente. Il monitoraggio della corrente e la funzione di protezione sono molto importanti poiché un sistema affidabile e integrato consente alle case automobilistiche di progettare il cablaggio dei veicoli in modo più efficiente, riducendo il diametro dei cavi in rame, e quindi di risparmiare sui costi.
This thesis presents the development of a mixed-signal multi-functional system for automotive applications and, in particular, for high-side current measurements, open-load detection and thermo-electrical stress protection. The system is composed of a tracking ADC featuring a triple-ranged resolution (coarse, fine and finest) in order to adapt to the system requirements and optimize the design in terms of area. The coarse range, designed for the full-scale input values [0A:100A], has a 5 b resolution and it is used for the stress detection feature. The fine and the finest ranges are used for lowest input current values [0A:14A] where more accuracy is required. Moreover, the system implements two protections functionalities: it is capable to detect a possible load detachment by processing the current measurements and it is able to estimate the wire temperature by digitally processing the ADC output and to signal if the cables heat up dangerously. The current monitoring and the protection feature are extremely important as a reliable and embedded system enables the car manufactures to design the vehicles harness more efficiently, by reducing the copper cables diameter, and therefore to save costs

Styles APA, Harvard, Vancouver, ISO, etc.

Malizia, Fabio. « A numerical study of temperature effects on hot wire measurements inside turbulent channel flows ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amslaurea.unibo.it/5221/.

Texte intégral

Résumé :

A way to investigate turbulence is through experiments where hot wire measurements are performed. Analysis of the in turbulence of a temperature gradient on hot wire measurements is the aim of this thesis work. Actually - to author's knowledge - this investigation is the first attempt to document, understand and ultimately correct the effect of temperature gradients on turbulence statistics. However a numerical approach is used since instantaneous temperature and streamwise velocity fields are required to evaluate this effect. A channel flow simulation at Re_tau = 180 is analyzed to make a first evaluation of the amount of error introduced by temperature gradient inside the domain. Hot wire data field is obtained processing the numerical flow field through the application of a proper version of the King's law, which connect voltage, velocity and temperature. A drift in mean streamwise velocity profile and rms is observed when temperature correction is performed by means of centerline temperature. A correct mean velocity pro�le is achieved correcting temperature through its mean value at each wall normal position, but a not negligible error is still present into rms. The key point to correct properly the sensed velocity from the hot wire is the knowledge of the instantaneous temperature field. For this purpose three correction methods are proposed. At the end a numerical simulation at Re_tau =590 is also evaluated in order to confirm the results discussed earlier.

Styles APA, Harvard, Vancouver, ISO, etc.

Koujili, Mohamed. « Design and construction of a new actuator for the LHC wire scanner ». Thesis, Belfort-Montbéliard, 2013. http://www.theses.fr/2013BELF0196/document.

Texte intégral

Résumé :

Le LHC met en collision deux faisceaux de protons avec une énergie de 7 Tevchacun, entrainant ainsi un taux de particules d'environ 109 Hz. Le taux departicules est déterminé la production d'une coupe transversale, une constancenaturelle, la luminosité et un paramétre dépendant de l'accélérateurcapable de décrire les faisceaux de particules. La luminosité dépend dunombre de particules dans chaque faisceau linéairement et des dimensionstransversales du faisceau inversement. Elle augmente avec la densité dufaisceau de particules et en conséquence, la probabilité d'interactions estaccrue. Pour optimiser les tailles des faisceaux transversaux, on utilisedes dispositifs de contrle de pro_le, qui permettent de mesurer les changementsde paramétres dépendants. A l'intérieur du LHC, trois di_érentstypes de dispositifs de contrle des pro_les sont installés, savoir le WireScanner (WS), le Synchroton Light Monitor et le Rest Gas Pro_le Monitor.Le WS est considéré comme étant le plus précis de ces trois dispositifsde contrle et sert d'appareil de calibrage pour les deux autres. Ils'agit d'un appareil électromécanique qui mesure l'état de densité du faisceautransversale de faon intermittente. Lorsque le cble traverse le faisceau,l'interaction particule-matiére génére une cascade de particules secondaires.Ces derniers sont interceptés par un scintillateur, lequel est attaché un photo-multiplieur, et ce a_n de mesurer l'intensité de la lumiéreainsi produite. L'amplitude du signal lumineux est proportionnelle la densité de la portion de faisceau interceptée. L'acquisition de la position du_l et celle de l'intensité du signal sont synchronisées avec la fréquence dela révolution de particules puis sont combinées pour construire le pro_lede densité du faisceau transversal. Le WS est installé et mis en marchedans tous les accélérateurs circulaires du CERN sur une base réguliére
The LHC collides two protons beams with an energy of 7 TeV each resultingin a aimed total particle rate of about 109 Hz. The particle rateis determined by the production cross section, a natural constant and theluminosity accelerator dependent parameter describing the particle beams.The luminosity depends on the number of particles in each beam linearlyand on the transverse dimensions of the particle beam inversely. It increaseswith the particle beam density and therefore the probability of interactions.To optimize the transverse beams sizes, pro_le monitors are used to measureparameter depending changes. Within the LHC, three di_erent typesof pro_le monitors are installed: Wire scanner (WS), Synchrotron lightmonitor and Rest Gas Pro_le Monitor. The WS monitor is considered tobe the most accurate of these monitors and serves as a calibration devicefor the two others. The WS is an electro-mechanical device which measuresthe transverse beam density pro_le in an intermittent way. As the wirepasses through the beam, the particle-matter interaction generates a cascadeof secondary particles. These are intercepted by a scintillator, which isattached to a photomultiplier in order to measure the intensity of the lightthereby produced. The light signal amplitude is proportional to the densityof the intercepted beam portion. The acquisitions of the wire position andthe intensity signal are synchronized with the particle revolution frequencyand are combined to construct the transverse beam density pro_le. TheWS is installed and operated in all circular accelerators of CERN on a dailybasis

Styles APA, Harvard, Vancouver, ISO, etc.

Vičar, Pavel. « Měření teploty ve fotovoltaických systémech ». Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218702.

Texte intégral

Résumé :

This diploma thesis deals with covers design and realisation of device for multipoint temperature measuring in fotovoltaic systems. As a controlling microcomputer is used Atmel ATMega128L, temperature sensors are realised by DS18S20 digital thermometers, connected via 1-wire bus. System can read temperature from x temperature sensors, includes memory for measured data, real time clock and display with buttons for basic user control. Temperatures are measured periodically, values are stored into internal memory and showed on display.Measured data can also be transferred via seriál bus to clinent PC. Device is projected as a battery-operated compact tool. The final realization is made with respect to minimal system requirements and to possible future extensibility for wider usage spectrum.

Styles APA, Harvard, Vancouver, ISO, etc.

Knott, Ryan Christopher. « High temperature durability of metals for use in a particle heating receiver for concentrated solar power ». Thesis, Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/53117.

Texte intégral

Résumé :

An experimental investigation is presented on a novel High Temperature Falling Particle Receiver for Concentrated Solar Power (CSP) to quantify the extent of erosion of the receiver structural materials by the flowing particulate matter. The current receiver design uses a series of metal wire mesh screens to slow down the particulate flow through the receiver in order to increase their residence time thereby achieving the desired temperature rise within the receiver without the need for particulate recirculation. The solid particulates are gravity fed through the receiver where they absorb the incident thermal energy before flowing to a high temperature storage bin upstream of a heat exchanger where the heat stored in the particulate material is transferred to the working fluid for the power cycle. To assess the effective life of the receiver, this experimental investigation is undertaken. This thesis includes the development of an apparatus to test wire meshes under high temperature and particle abrasion conditions, and the presentation and analysis of these results.

Styles APA, Harvard, Vancouver, ISO, etc.

Bosworth, Kyle Judson. « Health Monitoring of the Veterans' Glass City Skyway : Vibrating Wire Strain Gage Testing, Study of Temperature Gradients and a Baseline Truck Test ». Connect to Online Resource-OhioLINK, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=toledo1197693985.

Texte intégral

Résumé :

Thesis (M.S.)--University of Toledo, 2007.
Typescript. "Submitted as partial fulfillment of the requirements for the Master of Science in Civil Engineering." "A thesis entitled"--at head of title. Bibliography: leaves 86-87.

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Livres sur le sujet "Wire-temperature"

Rajesh, T. A. Microcontroller based 1-wire temperature sensor network. Ahmedabad : Physical Research Laboratory, 2011.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Center, Ames Research, dir. A high-performance constant-temperature hot-wire anemometer. Moffett Field, Calif : National Aeronautics and Space Administration, Ames Research Center, 1994.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Center, Ames Research, dir. A high-performance constant-temperature hot-wire anemometer. Moffett Field, Calif : National Aeronautics and Space Administration, Ames Research Center, 1994.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Center, Ames Research, dir. A high-performance constant-temperature hot-wire anemometer. Moffett Field, Calif : National Aeronautics and Space Administration, Ames Research Center, 1994.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Lei, Jih-Fen. Development and characterization of PdCr temperature-compensated wire resistance strain gage. Cleveland, Ohio : National Aeronautics and Space Administration, Lewis Reserch Center, 1989.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

L, Dreshfield Robert, et United States. National Aeronautics and Space Administration., dir. Progress toward a tungsten alloy wire/high temperature alloy composite turbine blade. [Washington, DC : National Aeronautics and Space Administration, 1992.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Forbes, Donn. The U.S. market for high-temperature superconducting wire in transmission cable applications. Golden, CO : National Renewable Energy Laboratory, 1996.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Center, Langley Research, dir. Development of LaRC [superscript TM] - IA thermoplastic polyimide coated aerospace wiring. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1995.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Wire-temperature"

Manokruang, Supasit, Frederic Vignat, Matthieu Museau et Maxime Limousin. « Process Parameters Effect on Weld Beads Geometry Deposited by Wire and Arc Additive Manufacturing (WAAM) ». Dans Lecture Notes in Mechanical Engineering, 9–14. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_3.

Texte intégral

Résumé :

AbstractAmong Additive Manufacturing technologies, Wire and Arc Additive Manufacturing process is strongly dependent of deposition conditions such as welding parameters, substrate temperature, trajectory. In this research, geometry and temperature evolutions of single beads have been investigated according to process parameters modifications. For our experiment, a heating device have been used in order to control the substrate temperature from room temperature up to 400 °C. Considering the Cold Metal Transfer technology, welding parameters, Wire Feed Speed (WFS) and Travel Speed (TS), have been modified while keeping a constant ratio λ (WFS/TS). Results indicate that weld bead geometry, height (h) and width (w), is influenced by substrate temperature and welding parameters. It has been shown that substrate temperature, itself influenced by process parameters, tends to produce thicker and lower weld beads while it increases.

Styles APA, Harvard, Vancouver, ISO, etc.

Rahayu, Soni Aulia, Rachmat Sunarya, Edy Maryadi, Laras Toersilowati, Listi Restu Triani et Christine Cecylia Munthe. « Performance Analysis of Platinum Wire Temperature Sensor for Radiosonde ». Dans Springer Proceedings in Physics, 371–82. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-0308-3_31.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Yurek, G. J. « Business Opportunities for High Temperature Superconducting Wires and Wire Products ». Dans Advances in Superconductivity VI, 3–8. Tokyo : Springer Japan, 1994. http://dx.doi.org/10.1007/978-4-431-68266-0_1.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Kumar, Varun, Manoj Kumar, Shobhna Sharma et Chandra Shakher. « Measurement of Temperature Profile around Heated Wire Using Digital Holography ». Dans Fringe 2013, 497–502. Berlin, Heidelberg : Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-36359-7_87.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

DeMoranville, K., J. M. Seuntjens, W. Barnes, C. J. Christopherson, P. Antaya et G. Snitchler. « Magnet Conductor Development Using Bi-2223 High Temperature Superconducting Wire ». Dans Advances in Cryogenic Engineering Materials, 769–75. Boston, MA : Springer US, 1998. http://dx.doi.org/10.1007/978-1-4757-9056-6_101.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Charubin, Tomasz, et Roman Szewczyk. « Temperature Influence on Matteucci Effect in Fe-Based Amorphous Wire ». Dans Advances in Intelligent Systems and Computing, 642–47. Cham : Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-77179-3_61.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Kumar, Jitendra, Sanghamitra Das et Shrikrishna N. Joshi. « Three-Dimensional Numerical Modelling of Temperature Profiles on the Wire Electrode During Wire Electric Discharge Machining Process ». Dans Advances in Mechanical Engineering, 359–71. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-0124-1_32.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Woolf, L. D., F. E. Elsner, W. A. Raggio, S. S. Pak, T. L. Figueroa, J. D. Rose, R. B. Stephens, R. A. Olstad et T. Ohkawa. « Development of High Temperature Superconductor Coated Metal Fiber and Multifilamentary Wire ». Dans Advances in Superconductivity IV, 511–16. Tokyo : Springer Japan, 1992. http://dx.doi.org/10.1007/978-4-431-68195-3_108.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Wu, Yun Zhong, Yong Qing Ma, Hong Tao Gao, Yang Zhang et Shi Yong Liu. « Electrical Conductibility of Copper Clad Steel Wire by Drawing at Room Temperature ». Dans Advances in Composite Materials and Structures, 321–24. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.321.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Talamelli, Alessandro, Fabio Malizia, Ramis Örlü, Andrea Cimarelli et Philipp Schlatter. « Temperature Effects in Hot-Wire Measurements on Higher-Order Moments in Wall Turbulence ». Dans Springer Proceedings in Physics, 185–89. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29130-7_33.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Wire-temperature"

Jones, Robert J. « High Temperature Polymeric Wire Insulation ». Dans Aerospace Atlantic Conference & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1994. http://dx.doi.org/10.4271/941187.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Ben Masaud, Taha M., Antulio Tarazona, Xia Chen, Graham Reed et H. M. H. Chong. « Low temperature hot-wire polysilicon waveguides ». Dans 2013 Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR). IEEE, 2013. http://dx.doi.org/10.1109/cleopr.2013.6600238.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Salovarda, Marija, et Kresimir Malaric. « Temperature Distribution Inside Wire Patch Cell ». Dans 2008 14th Conference on Microwave Techniques (COMITE 2008). IEEE, 2008. http://dx.doi.org/10.1109/comite.2008.4569907.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Law Chee Soon et Venkata Krishna. « Wire strength of Cu wire on al metallization after high temperature reliability ». Dans 2008 33rd IEEE/CPMT International Electronics Manufacturing Technology Conference (IEMT). IEEE, 2008. http://dx.doi.org/10.1109/iemt.2008.5507847.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Winther, Andreas Thor, Wei Liu, Alberto Nannarelli et Sarma Vrudhula. « Temperature dependent wire delay estimation in floorplanning ». Dans 2011 NORCHIP. IEEE, 2011. http://dx.doi.org/10.1109/norchp.2011.6126741.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Lee, Jong-Moo, Duk-Jun Kim, Ho-Kyun Ahn, Sang-Ho Park, Junghyung Pyo et Gyungock Kim. « Temperature-Insensitive Silicon Nano-Wire Ring Resonator ». Dans OFC/NFOEC 2007 - 2007 Conference on Optical Fiber Communication and the National Fiber Optic Engineers Conference. IEEE, 2007. http://dx.doi.org/10.1109/ofc.2007.4348872.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Kielbasa, Jan. « Single-wire thermal anemometer with temperature compensation ». Dans Optoelectronic and Electronic Sensors V, sous la direction de Wlodzimierz Kalita. SPIE, 2003. http://dx.doi.org/10.1117/12.517113.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Shiqing, Zheng, Wen Peng, Feng Zhenhua et Shan Jiguo. « Numerical simulation of wire temperature field for prediction of wire transfer stability in laser hot wire welding ». Dans ICALEO® 2013 : 32nd International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing. Laser Institute of America, 2013. http://dx.doi.org/10.2351/1.5062890.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Junsing, Tipparat. « Interface Circuit for Three-Wire Resistance Temperature Detector with Lead Wire Resistance Compensation ». Dans 2019 Research, Invention, and Innovation Congress (RI2C). IEEE, 2019. http://dx.doi.org/10.1109/ri2c48728.2019.8999909.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Jingzhuo, Wang, et Gong Chenglong. « Research on 1-Wire Bus Temperature Monitoring System ». Dans 2007 8th International Conference on Electronic Measurement and Instruments. IEEE, 2007. http://dx.doi.org/10.1109/icemi.2007.4351019.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Wire-temperature"

Wilding, Malwina, Kunal Mondal, Kiyo Fujimoto, Randy Lloyd, Michael McMurtrey et Troy Unruh. Initial Temperature Testing of Advanced Manufactured Melt Wire Package. Office of Scientific and Technical Information (OSTI), août 2021. http://dx.doi.org/10.2172/1826597.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Forbes, D. The US market for high-temperature superconducting wire in transmission cable applications. Office of Scientific and Technical Information (OSTI), avril 1996. http://dx.doi.org/10.2172/249281.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Cardell, G. A Note on the Temperature-Dependent Hot-Wire Calibration Method of Cimbala and Park. Fort Belvoir, VA : Defense Technical Information Center, juillet 1992. http://dx.doi.org/10.21236/ada273841.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Mondal, Kunal, Kiyo Fujimoto et Michael McMurtrey. Non-visual analysis of miniaturized melt wire arrays for in-pile measurement of peak irradiation temperature. Office of Scientific and Technical Information (OSTI), février 2020. http://dx.doi.org/10.2172/1668675.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Anderson, Roger, et David Anderson. Solid state device for two-wire downhole temperature measurement as a function of current. Final performance technical report. Office of Scientific and Technical Information (OSTI), janvier 2002. http://dx.doi.org/10.2172/798495.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

EXPERIMENTAL INVESTIGATION ON MECHANICAL PROPERTIES OF GRADE 1670 STEEL WIRES AT AND AFTER ELEVATED TEMPERATURE. The Hong Kong Institute of Steel Construction, août 2022. http://dx.doi.org/10.18057/icass2020.p.209.

Texte intégral

Résumé :

Grade 1670 steel wires were selected for elevated-temperature and post-elevated-temperature tensile tests. The test data were analyzed through comparison with the results in existing literatures. The elevated-temperature test results indicate that, mechanical properties of the steel wires degraded with the increase of temperature. The mechanical behaviors of the steel wires degraded rapidly at the temperature exceeding 300°C; and the load-carrying ability was substantially lost when the temperature increased up to 700°C. In the post-elevated-temperature test, the modulus of the steel wire was substantially completely recovered after cooling from the elevated temperatures; the nominal yield strength and ultimate strength degraded obviously after cooling from the temperature exceeding 400°C. Based on the test data, the reduction factors of the mechanical properties at and after elevated temperatures were fitted as a function of the temperature, and constitutive models of the steel wires were established. The results can provide technical supports for the analysis of fire performance of prestressed cable support structures, and their post-fire repair.

Styles APA, Harvard, Vancouver, ISO, etc.

EXPERIMENTAL INVESTIGATION ON MECHANICAL PROPERTIES OF GRADE 1670 STEEL WIRES UNDER AND AFTER ELEVATED TEMPERATURE. The Hong Kong Institute of Steel Construction, mars 2023. http://dx.doi.org/10.18057/ijasc.2023.19.1.2.

Texte intégral

Résumé :

Grade 1670 steel wires were selected for elevated-temperature and post-elevated-temperature tensile tests. The test data were analyzed through comparison with the results in existing literatures. The elevated-temperature test results indicate that, mechanical properties of the steel wires degraded with the increase of temperature. The mechanical behaviors of the steel wires degraded rapidly at the temperature exceeding 300°C, and the load-carrying ability was substantially lost when the temperature increased up to 700°C. In the post-elevated-temperature test, the modulus of the steel wire was almost completely recovered after cooling from the elevated temperatures. The nominal yield strength and ultimate strength degraded obviously after cooling from the temperature exceeding 400°C. Based on the test data, the reduction factors of the mechanical properties at and after elevated temperatures are fitted as a function of the temperature, and constitutive models of the steel wires are established. The results can provide technical supports for the analysis of fire performance of prestressed cable support structures, and their post-fire repair.

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!