Articles de revues sur le sujet « WIRE-CUT EDM PROCESS »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « WIRE-CUT EDM PROCESS ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.
Sen, Ruma, P. Charkraborti et J. Debbarma. « Wear Behavior in Wire of Wire Cut EDM ». Applied Mechanics and Materials 704 (décembre 2014) : 70–76. http://dx.doi.org/10.4028/www.scientific.net/amm.704.70.
Texte intégralBeltrami, Ivano, Axel Bertholds et Dirk Dauw. « A simplified post process for wire cut EDM ». Journal of Materials Processing Technology 58, no 4 (avril 1996) : 385–89. http://dx.doi.org/10.1016/0924-0136(95)02212-0.
Texte intégralMuttamara, Apiwat, et Patittar Nakwong. « Enhancing Wire-EDM Performance with Zinc-Coated Brass Wire Electrode and Ultrasonic Vibration ». Micromachines 14, no 4 (16 avril 2023) : 862. http://dx.doi.org/10.3390/mi14040862.
Texte intégralSatynarayana, Kosaraju, Kumkuma Rajkiran, Pujari Anil kumar et D. Chakradhar. « A Role of cryogenic in Wire cut EDM process ». E3S Web of Conferences 184 (2020) : 01067. http://dx.doi.org/10.1051/e3sconf/202018401067.
Texte intégralBergs, T., L. Welschof, T. Herrig et A. Klink. « Energetic Characterization of Trim Cut Process Signals in Wire EDM ». Procedia CIRP 95 (2020) : 262–67. http://dx.doi.org/10.1016/j.procir.2020.02.281.
Texte intégralLok, Y. K., et T. C. Lee. « Processing of advanced ceramics using the wire-cut EDM process ». Journal of Materials Processing Technology 63, no 1-3 (janvier 1997) : 839–43. http://dx.doi.org/10.1016/s0924-0136(96)02735-5.
Texte intégralA. Kumar, N. Dutt, V. Pratap Singh, C. S. Meena et A. Prasad. « Performance Evaluation of WEDM using Parametric Variation ». Journal of Mechanical Engineering : Prakash 01, no 01 (2022) : 07–13. http://dx.doi.org/10.56697/jmep.2022.1102.
Texte intégralKumarswamy, Y., P. Durga Ganesh, K. Ravi Kumar, S. Sai Varun, G. Jagan Vamsi et Y. Phaneendra. « Optimize the process parameters of wire EDM and to analyse the welding characteristics of tig welding joints using AISI 308 ». E3S Web of Conferences 391 (2023) : 01043. http://dx.doi.org/10.1051/e3sconf/202339101043.
Texte intégralMohamedosman Elyass, Waddah, Vishal Sharma, Ganesh Kantak et Mohd Mukhtar Alam. « Performance Investigation of Wire EDM Process Parameters ». IOP Conference Series : Materials Science and Engineering 1224, no 1 (1 janvier 2022) : 012001. http://dx.doi.org/10.1088/1757-899x/1224/1/012001.
Texte intégralNandakumar, C., B. Mohan et S. Srisathirapathy. « Optimization of Process Parameters of Titanium Alloy Grade 5 Using CNC Wire-Cut EDM ». Advanced Materials Research 984-985 (juillet 2014) : 56–61. http://dx.doi.org/10.4028/www.scientific.net/amr.984-985.56.
Texte intégralVS Ram Prasad, A., Koona Ramji et B. Raghu Kumar. « Study of wire-electrical discharge machining parameters of titanium alloy by using taguchi method ». International Journal of Engineering & ; Technology 7, no 2.8 (19 mars 2018) : 10. http://dx.doi.org/10.14419/ijet.v7i2.8.10316.
Texte intégralGoswami, Amitesh, et Jatinder Kumar. « Surface Topography and Kerf Study of Nimonic 80A Using Wire-Cut EDM ». Materials Science Forum 808 (décembre 2014) : 35–41. http://dx.doi.org/10.4028/www.scientific.net/msf.808.35.
Texte intégralDurairaj, M., S. Elanthirayan, K. Aanand et J. Poornachandran. « Optimization of Cutting Parameters in Wirecut EDM of D2 Die Steel Using Gravitational Search Algorithm ». Applied Mechanics and Materials 592-594 (juillet 2014) : 591–94. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.591.
Texte intégralNatarajan, K., H. Ramakrishnan, Amel Gacem, V. Vijayan, K. Karthiga, H. Elhosiny Ali, B. Prakash et Addisalem Mekonnen. « Study on Optimization of WEDM Process Parameters on Stainless Steel ». Journal of Nanomaterials 2022 (12 juillet 2022) : 1–7. http://dx.doi.org/10.1155/2022/6765721.
Texte intégralKawata, Akiyoshi, Akira Okada, Yasuhiro Okamoto et Haruya Kurihara. « Influence of Nozzle Jet Flushing on Wire Breakage in 1st-Cut Wire EDM from Start Hole ». Key Engineering Materials 749 (août 2017) : 130–35. http://dx.doi.org/10.4028/www.scientific.net/kem.749.130.
Texte intégralMAITY, K. P., et M. CHOUBEY. « A REVIEW ON VIBRATION-ASSISTED EDM, MICRO-EDM AND WEDM ». Surface Review and Letters 26, no 05 (juin 2019) : 1830008. http://dx.doi.org/10.1142/s0218625x18300083.
Texte intégralAbbasi, Junaid Ali, Mirza Jahanzaib, Muhammad Azam, Salman Hussain, Ahmad Wasim et Musharaf Abbas. « Effects of wire-Cut EDM process parameters on surface roughness of HSLA steel ». International Journal of Advanced Manufacturing Technology 91, no 5-8 (24 décembre 2016) : 1867–78. http://dx.doi.org/10.1007/s00170-016-9881-9.
Texte intégralKumar, Amit, Tarun Soota et Jitendra Kumar. « Optimisation of wire-cut EDM process parameter by Grey-based response surface methodology ». Journal of Industrial Engineering International 14, no 4 (21 mars 2018) : 821–29. http://dx.doi.org/10.1007/s40092-018-0264-8.
Texte intégralJakhar, Balram, Puneet Katyal et Vishal Gulati. « Investigating the Process Parameters for optimization on Inconel 600 using wire cut EDM ». International Journal of Advance Research and Innovation 3, no 3 (2015) : 90–97. http://dx.doi.org/10.51976/ijari.331512.
Texte intégralSatyanarayana, K., B. Ramya Krishna, M. Bhargavi, R. Eswari Vasuki et K. Raj Kiran. « Taguchi Optimization In Machining Inconel 600 With WEDM Process Using Cryogenically Treated Brass Wire ». E3S Web of Conferences 309 (2021) : 01110. http://dx.doi.org/10.1051/e3sconf/202130901110.
Texte intégralWu, Yung-Yi, Tzu-Wei Huang et Dong-Yea Sheu. « Desktop Micro-EDM System for High-Aspect Ratio Micro-Hole Drilling in Tungsten Cemented Carbide by Cut-Side Micro-Tool ». Micromachines 11, no 7 (11 juillet 2020) : 675. http://dx.doi.org/10.3390/mi11070675.
Texte intégralFurutani, Katsushi. « Proposal for Abrasive Layer Fabrication on Thin Wire by Electrical Discharge Machining ». International Journal of Automation Technology 4, no 4 (5 juillet 2010) : 394–98. http://dx.doi.org/10.20965/ijat.2010.p0394.
Texte intégralLiu, J. F., et Y. B. Guo. « Process Capability of Wire-EDM of NiTi Shape Memory Alloy at Main Cut and Trim Cut Modes ». Procedia Manufacturing 1 (2015) : 904–14. http://dx.doi.org/10.1016/j.promfg.2015.09.083.
Texte intégralZhao, Jian Chuang, Jian Dong Hu, Fan You Meng et Yao Min Wang. « Machinability and Material Removal Mechanism of Face Centred Cubic (FCC) Conductive Ceramic TiBCN in EDM Processing ». Key Engineering Materials 680 (février 2016) : 147–51. http://dx.doi.org/10.4028/www.scientific.net/kem.680.147.
Texte intégralSathish, Thanikodi, Vinayagam Mohanavel, Khalid Ansari, Rathinasamy Saravanan, Alagar Karthick, Asif Afzal, Sagr Alamri et C. Ahamed Saleel. « Synthesis and Characterization of Mechanical Properties and Wire Cut EDM Process Parameters Analysis in AZ61 Magnesium Alloy + B4C + SiC ». Materials 14, no 13 (1 juillet 2021) : 3689. http://dx.doi.org/10.3390/ma14133689.
Texte intégralSubrahmanyam, M., et T. Nancharaiah. « Optimization of process parameters in wire-cut EDM of Inconel 625 using Taguchi’s approach ». Materials Today : Proceedings 23 (2020) : 642–46. http://dx.doi.org/10.1016/j.matpr.2019.05.449.
Texte intégralABLYAZ, TIMUR RIZOVICH, et KARIM RAVILEVICH MURATOV. « THE TECHNOLOGICAL QUALITY CONTROL OF STACK CUTTING BY WIRE ELECTRICAL DISCHARGE MACHINING ». Surface Review and Letters 24, no 05 (19 octobre 2016) : 1750060. http://dx.doi.org/10.1142/s0218625x17500603.
Texte intégralAshok, R., L. Poovazhagan, S. Srinath Ramkumar et S. Vignesh Kumar. « Optimization of Material Removal Rate in Wire-EDM Using Fuzzy Logic and Artifical Neural Network ». Applied Mechanics and Materials 867 (juillet 2017) : 73–80. http://dx.doi.org/10.4028/www.scientific.net/amm.867.73.
Texte intégralCHAITANYA REDDY, M., et K. VENKATA RAO VENKATA RAO. « An overview of major research areas in Wire cut EDM on different materials ». INCAS BULLETIN 12, no 4 (4 décembre 2020) : 33–48. http://dx.doi.org/10.13111/2066-8201.2020.12.4.4.
Texte intégralSivaraman, B., Senthil Padmavathy, P. Jothiprakash et T. Keerthivasan. « Multi-Response Optimisation of Cutting Parameters of Wire EDM in Titanium Using Response Surface Methodology ». Applied Mechanics and Materials 854 (octobre 2016) : 93–100. http://dx.doi.org/10.4028/www.scientific.net/amm.854.93.
Texte intégralAblyaz, Timur Rizovich, Evgeny Sergeevich Shlykov, Karim Ravilevich Muratov et Sarabjeet Singh Sidhu. « Analysis of Wire-Cut Electro Discharge Machining of Polymer Composite Materials ». Micromachines 12, no 5 (18 mai 2021) : 571. http://dx.doi.org/10.3390/mi12050571.
Texte intégralSabyrov, Nurbol, M. Jahan, Azat Bilal et Asma Perveen. « Ultrasonic Vibration Assisted Electro-Discharge Machining (EDM)—An Overview ». Materials 12, no 3 (10 février 2019) : 522. http://dx.doi.org/10.3390/ma12030522.
Texte intégralLuo, Hong Ping, Zhi Xiong Zhou, Yong Jun Zhang et Zhong Ning Guo. « Wire Electrical Discharge Machining (Wire EDM) Cutting of Flexures for a Rotary Flexural Bearing Fabrication ». Advanced Materials Research 314-316 (août 2011) : 1727–33. http://dx.doi.org/10.4028/www.scientific.net/amr.314-316.1727.
Texte intégralSharma, Hitesh, et Gaurav Mitta. « Experimental study of micro channels for material removal rate by using wire-cut edm process ». International Journal of Current Advanced Research 6, no 3 (28 mars 2017) : 2844–49. http://dx.doi.org/10.24327/ijcar.2017.2849.0123.
Texte intégralKapoor, Shrey. « Optimisation of Process Parameter for Material Removal Rate of Wire Cut EDM using Taguchi Method ». International Journal for Research in Applied Science and Engineering Technology 7, no 8 (31 août 2019) : 987–91. http://dx.doi.org/10.22214/ijraset.2019.8147.
Texte intégralChinnadurai, T., et S. Arungalai Vendan. « Contemplating the Performance Measures of Wire Cut EDM Based on Process Parameters for AISI 4140 ». Materials Today : Proceedings 2, no 4-5 (2015) : 1067–73. http://dx.doi.org/10.1016/j.matpr.2015.07.009.
Texte intégralDivya, Marelli, N. Sateesh et Ram Subbiah. « Review on multi objective optimization of wire cut EDM process parameters using grey relational analysis ». Materials Today : Proceedings 26 (2020) : 3124–30. http://dx.doi.org/10.1016/j.matpr.2020.02.645.
Texte intégralKumar, U. Ashok, G. Saidulu et P. Laxminaryana. « Experimental investigation of process parameters for machining of Nimonic alloy 75 using wire-cut EDM ». Materials Today : Proceedings 27 (2020) : 1362–68. http://dx.doi.org/10.1016/j.matpr.2020.02.713.
Texte intégralDurairaj, M., A. K. S. Ansari et M. H. Gauthamkumar. « Parametric optimization of wire cut electrical discharge machining ». International Journal of Engineering & ; Technology 3, no 2 (26 avril 2014) : 212. http://dx.doi.org/10.14419/ijet.v3i2.1807.
Texte intégralDoreswamy, Deepak, Anupkumar M. Bongale, Marcin Piekarski, Arunkumar Bongale, Satish Kumar, Danil Yurievich Pimenov, Khaled Giasin et Krzysztof Nadolny. « Optimization and Modeling of Material Removal Rate in Wire-EDM of Silicon Particle Reinforced Al6061 Composite ». Materials 14, no 21 (26 octobre 2021) : 6420. http://dx.doi.org/10.3390/ma14216420.
Texte intégralChen, Shun Tong, et Ming Chie Yeh. « Development and Application of a Micro-Honing-Tool ». Advanced Materials Research 76-78 (juin 2009) : 189–94. http://dx.doi.org/10.4028/www.scientific.net/amr.76-78.189.
Texte intégralGupta, Kapil. « Investigation on Fabrication of SS316 Gear by Wire-EDM ». MATEC Web of Conferences 346 (2021) : 01044. http://dx.doi.org/10.1051/matecconf/202134601044.
Texte intégralSeshaiah, Sathishkumar, Deepak Sampathkumar, Mathanbabu Mariappan, Ashokkumar Mohankumar, Guruprasad Balachandran, Murugan Kaliyamoorthy, Barathiraja Rajendran et Rajendiran Gopal. « Optimization on Material Removal Rate and Surface Roughness of Stainless Steel 304 Wire Cut EDM by Response Surface Methodology ». Advances in Materials Science and Engineering 2022 (29 août 2022) : 1–10. http://dx.doi.org/10.1155/2022/6022550.
Texte intégralNur, Rusdi, M. Muas, Apollo et Syah Risal. « Effect of Current and Wire Speed on Surface Roughness in the manufacturing of Straight Gear using Wire-cut EDM Process ». IOP Conference Series : Materials Science and Engineering 619 (25 octobre 2019) : 012002. http://dx.doi.org/10.1088/1757-899x/619/1/012002.
Texte intégralRajmohan, K., et A. Senthil Kumar. « Experimental investigation and prediction of optimum process parameters of micro-wire-cut EDM of 2205 DSS ». International Journal of Advanced Manufacturing Technology 93, no 1-4 (19 mars 2016) : 187–201. http://dx.doi.org/10.1007/s00170-016-8615-3.
Texte intégralMuley, Mahesh. « Optimization of Wire Cut Electro Discharge Machining Process Parameters for Aluminium 6082 by using Taguchi Technique ». International Journal for Research in Applied Science and Engineering Technology 9, no 12 (31 décembre 2021) : 2257–62. http://dx.doi.org/10.22214/ijraset.2021.39723.
Texte intégralVijaya Babu, T., et J. S. Soni. « Investigation of process parameters optimization in die-sinking and wire cut EDM to improve process performance using taguchi technique ». Materials Today : Proceedings 5, no 13 (2018) : 27088–93. http://dx.doi.org/10.1016/j.matpr.2018.09.014.
Texte intégralOniszczuk-Świercz, Dorota, Rafał Świercz et Štefan Michna. « Evaluation of Prediction Models of the Microwire EDM Process of Inconel 718 Using ANN and RSM Methods ». Materials 15, no 23 (23 novembre 2022) : 8317. http://dx.doi.org/10.3390/ma15238317.
Texte intégralDivya, Marelli, N. Sateesh, B. Ch Nookaraju, A. Anitha Lakshmi et Subbiah Ram. « Multi performance optimisation of wire-cut EDM process parameters of Incoloy 800 alloy using grey relational analysis ». Materials Today : Proceedings 44 (2021) : 2416–20. http://dx.doi.org/10.1016/j.matpr.2020.12.464.
Texte intégralReddy, A. Damodara. « Optimization of Surface Roughness and Kerf Width Parameters in Wire Cut EDM Process through Response Surface Methodology. » International Journal for Research in Applied Science and Engineering Technology V, no XI (23 novembre 2017) : 2762–70. http://dx.doi.org/10.22214/ijraset.2017.11381.
Texte intégral