Littérature scientifique sur le sujet « Ultrasonic fatigue test »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Ultrasonic fatigue test ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Ultrasonic fatigue test"
Wu, Jin Rong. « Fatigue Test of Asphalt Mixture and Ultrasonic Forecast ». Advanced Materials Research 168-170 (décembre 2010) : 488–91. http://dx.doi.org/10.4028/www.scientific.net/amr.168-170.488.
Texte intégralFeng, Ning, Xin Wang, Jiazheng Guo, Qun Li, Jiangtao Yu et Xuecheng Zhang. « Design Theory and Experimental Research of Ultrasonic Fatigue Test ». Machines 10, no 8 (30 juillet 2022) : 635. http://dx.doi.org/10.3390/machines10080635.
Texte intégralMatsuura, Tohru. « Giga-cycle fatigue test by ultrasonic fatigue testing machine ». Journal of Japan Institute of Light Metals 68, no 6 (30 juin 2018) : 316–20. http://dx.doi.org/10.2464/jilm.68.316.
Texte intégralKim, Jae Woo, Da Hee Cho, Gwang Ju Jang, Joong Cheul Park, Yeong Cheol Lee, Byeong Choon Goo et In Sik Cho. « Guidelines for Standardization of Ultrasonic Fatigue Test ». Transactions of the KSME C Industrial Technology and Innovation 6, no 2 (30 septembre 2018) : 85–94. http://dx.doi.org/10.3795/ksme-c.2018.6.2.085.
Texte intégralDong, Hong Lei, Zhong Guo Huang, Qing Hua Yuan et Jia Fan. « Research on Fatigue Test of LZ20Mn2 Axle Pipe Steel ». Applied Mechanics and Materials 44-47 (décembre 2010) : 2152–56. http://dx.doi.org/10.4028/www.scientific.net/amm.44-47.2152.
Texte intégralKim, Bum Joon, Byeong Soo Lim, Sung Jin Song et Young H. Kim. « Application of Ultrasonic Test on Creep-Fatigue Life Evaluation ». Key Engineering Materials 321-323 (octobre 2006) : 476–79. http://dx.doi.org/10.4028/www.scientific.net/kem.321-323.476.
Texte intégralCHEN, Q., N. KAWAGOISHI, K. KARIYA, Y. NU et M. GOTO. « FATIGUE CRACK GROWTH OF AGE-HARDENED Al ALLOY UNDER ULTRASONIC LOADING ». International Journal of Modern Physics : Conference Series 06 (janvier 2012) : 275–81. http://dx.doi.org/10.1142/s2010194512003303.
Texte intégralMyeong, No-Jun, Seung-Wook Han, Jung-Hoon Park et Nak-Sam Choi. « Technical Review of Specimens under Ultrasonic Fatigue Test ». Transactions of the Korean Society of Mechanical Engineers A 37, no 8 (1 août 2013) : 967–73. http://dx.doi.org/10.3795/ksme-a.2013.37.8.967.
Texte intégralYAMADA, Takeshi, Hitoshi ISHII, Hiroyasu ARAKI et Keiichiro TOHGO. « 424 Ultrasonic Bending Fatigue Test of Thin Sheets ». Proceedings of Conference of Tokai Branch 2005.54 (2005) : 129–30. http://dx.doi.org/10.1299/jsmetokai.2005.54.129.
Texte intégralChen, Hanxin, Mingming Liu, Yongting Chen, Shaoyi Li et Yuzhuo Miao. « Nonlinear Lamb Wave for Structural Incipient Defect Detection with Sequential Probabilistic Ratio Test ». Security and Communication Networks 2022 (9 mars 2022) : 1–12. http://dx.doi.org/10.1155/2022/9851533.
Texte intégralThèses sur le sujet "Ultrasonic fatigue test"
Nikitin, Alexander. « Gigacycle Fatigue of the titanium alloy ». Thesis, Paris 10, 2015. http://www.theses.fr/2015PA100015/document.
Texte intégralThis PhD project is dealing with a problem of fatigue failures of aeronautical titanium alloy due to high frequency loading. The material for investigation was taken from the real aircraft engine compressor disk. Ultrasonic fatigue tests were carried out up to outrun limit of 1010 cycles. This region of lifetime is known as Gigacycle or very high cycle fatigue. This PhD project shows for the first time the results of fatigue tests on the VT3-1 aeronautical titanium alloy in the Gigacycle region. The fatigue properties of the titanium alloy were determined at 109 cycles for different loading conditions: tension-compression, tension-tension and torsion loading. Typical crack initiation mechanisms were identified and critical defects of microstructure were found. The effect of anisotropy due to fabrication process on the fatigue properties of the forged VT3-1 titanium alloy was studied. An influence of technological process on fatigue properties was also studied by comparison the results on extruded and forged VT3-1 titanium alloy.The new ultrasonic torsion machine was designed and installed for the long life (up to 1010 cycles) fatigue tests under rotation. The first results under ultrasonic torsion loading were obtained for the titanium alloy made by extrusion and forged technologies
Novelli, Marc. « Étude des microstructures de déformation induites par grenaillage ultrasonique en conditions cryogéniques d'aciers inoxydables austénitiques : effet sur les propriétés en fatigue ». Thesis, Université de Lorraine, 2017. http://www.theses.fr/2017LORR0239/document.
Texte intégralThe surface of mechanical components is a sensitive zone subjected to particular mechanical (friction, maximum stress) and chemical (ambient atmosphere, corrosion) interactions. Hence, the rupture is generally initiated on the surface. In order to increase the global integrity of the working parts, the industrial groups are still seeking technological solutions allowing the modifications of the surface properties. Nodaway, plenty of surface modification techniques have been developed like the mechanical surface treatments. Among them, the ultrasonic shot peening (or surface mechanical attrition treatment) focus on superficially deform the mechanical parts through numerous collisions of peening medias having random trajectories inside a confined chamber. The purpose of this study is based on the analysis and the comprehension of the deformed microstructures induced by the ultrasonic shot peening treatment, especially under cryogenic temperatures. To do so, several austenitic stainless steel grades having different stabilities regarding the martensitic transformation have been treated under cryogenic conditions and compared to the properties obtained under room temperature. The first observations have shown that, after a cryogenic peening, a decrease of the subsurface hardness takes place in the stable 310S alloy which was attributed to an increase of the mechanical properties under cryogenic temperature. This phenomenon is suppressed in the metastable 304L by triggering a martensitic phase transformation promoted under low temperature and happening deeper compared to room temperature, increasing substantially the subsurface hardness. Two metastable alloys (304L and 316L) were then selected to conduct an ultrasonic shot peening parametric study including the vibration amplitude (40 and 60 µm), the treatment duration (3 and 20 min) and temperature (room temperature, -80 and -130 °C). It has been shown that increasing the treatment energy by raising the vibration amplitude and/or the duration leads to an increase of the surface and subsurface hardnesses as well as the affected layer thickness. The use of cryogenic temperatures allows an additional increase of the hardness, especially in subsurface. By comparing the different hardness gradients with the martensite distributions along the hardened layers, a direct correlation with the hardening rate and the martensite fraction was observed. The initial stability of the treated material was also taken in account by carried out additional observations on the 316L having a higher stability. The results have indicated that the deformation temperature needs to be wisely chosen regarding the stability of the processed material in order to avoid a decrease of the subsurface hardness. Finally, the deformed microstructures generated under cryogenic ultrasonic shot peening were associated to the mechanical behaviors of cylindrical specimens using rotating bending fatigue tests. Compared to a room temperature treatment, a cryogenic peening allows a decrease of the surface roughness and the generation of higher surface compressive residual stresses by the formation of martensite. However, compared to a room temperature treatment, the fatigue behavior was not increased after a cryogenic peening because of a more pronounced surface residual stress relaxation and a reduction of the affected layer. However, the potential increase of the fatigue life after a cryogenic surface deformation was depicted by the study of the rupture surfaces. It was observed that, if the involvement of the surface defects introduced by the high surface roughness can be lowered, a single subsurface crack initiation can be produced increasing considerably the fatigue behavior of the processed material
Kozáková, Kamila. « Vliv vrubů při cyklickém vysokofrekvenčním únavovém zatěžování ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443717.
Texte intégralLivres sur le sujet "Ultrasonic fatigue test"
United States. National Aeronautics and Space Administration., dir. Real time acousto-ultrasonic NDE technique for monitoring damage in ceramic composites under dynamic loads. [Washington, D.C.] : National Aeronautics and Space Administration, 1995.
Trouver le texte intégralReal time acousto-ultrasonic NDE technique for monitoring damage in ceramic composites under dynamic loads. [Washington, D.C.] : National Aeronautics and Space Administration, 1995.
Trouver le texte intégralReal time acousto-ultrasonic NDE technique for monitoring damage in ceramic composites under dynamic loads. [Washington, D.C.] : National Aeronautics and Space Administration, 1995.
Trouver le texte intégralChapitres de livres sur le sujet "Ultrasonic fatigue test"
Kim, Bum Joon, Byeong Soo Lim, Sung Jin Song et Young H. Kim. « Application of Ultrasonic Test on Creep-Fatigue Life Evaluation ». Dans Advanced Nondestructive Evaluation I, 476–79. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-412-x.476.
Texte intégralTorabian, Noushin, Véronique Favier, Saeed Ziaei-Rad, Justin Dirrenberger, Frédéric Adamski et Nicolas Ranc. « Calorimetric Studies and Self-Heating Measurements for a Dual-Phase Steel Under Ultrasonic Fatigue Loading ». Dans Fatigue and Fracture Test Planning, Test Data Acquisitions and Analysis, 81–93. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 2017. http://dx.doi.org/10.1520/stp159820160053.
Texte intégralAoyama, Yosuke, Ichiro Takasu et Yasukazu Unigame. « Improvement in Efficiency of Ultrasonic Tests for the Macroscopic Inclusions Evaluation ». Dans Bearing Steel Technologies : 9th Volume, Advances in Rolling Contact Fatigue Strength Testing and Related Substitute Technologies, 257–67. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 2012. http://dx.doi.org/10.1520/stp104504.
Texte intégralHe, Bolin, Yongxiang Wang, Yingxia Yu, Yuxin Zhang et Kang Wei. « Theoretical Analysis and Experimental Verification of the Influence of Geometrical Parameters on the Fatigue Life of SMA490BW Welded Butt Joint ». Dans Advances in Transdisciplinary Engineering. IOS Press, 2020. http://dx.doi.org/10.3233/atde200249.
Texte intégralFuchs, P. A., U. Halabe, S. Petro, P. Klinkhachorn, H. Gangarao, A. V. Clark, M. G. Lozev et S. B. Chase. « Field Test Results of an Ultrasonic Applied Stress Measurement System for Fatigue Load Monitoring ». Dans Structural Materials Technology, 68–73. CRC Press, 2020. http://dx.doi.org/10.1201/9781003075844-12.
Texte intégralShirahata, H. « Applicability of 2D ultrasonic phased array nondestructive test for fatigue crack of orthotropic steel deck ». Dans Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations, 1028–35. CRC Press, 2021. http://dx.doi.org/10.1201/9780429279119-139.
Texte intégralKozakowski, Stanisław. « Measurements of the Changes in the Ultrasonic Wave Attenuation in Spheroidal Graphite Iron Test Pieces Subjected to Fatigue Load ». Dans Non-Destructive Testing, 2212–17. Elsevier, 1988. http://dx.doi.org/10.1016/b978-0-08-036221-2.50006-1.
Texte intégralShirahata, H. « Development of phased array ultrasonic test system for detection of fatigue crack of rib-to-deck weld of orthotropic steel deck system ». Dans Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges, 2857–64. CRC Press, 2018. http://dx.doi.org/10.1201/9781315189390-388.
Texte intégralActes de conférences sur le sujet "Ultrasonic fatigue test"
Celli, Dino A., Justin Warner, Onome Scott-Emuakpor et Tommy George. « Investigation of Self-Heating During Ultrasonic Fatigue Testing and Effect on Very High Cycle Fatigue Behavior of Titanium 6Al-4V ». Dans ASME Turbo Expo 2022 : Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-83443.
Texte intégralZhao, Nanzhu, Wei Li, Wayne W. Cai et Jeffrey A. Abell. « A Method to Study Fatigue Life of Ultrasonically Welded Lithium-Ion Battery Tab Joints Using Electrical Resistance ». Dans ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/msec2014-4159.
Texte intégralLopez Martinez, Luis. « Fatigue Life Extension of Offshore Structures by Ultrasonic Peening ». Dans ASME 2011 30th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2011. http://dx.doi.org/10.1115/omae2011-49935.
Texte intégralDaniel, Tobias, Annika Boemke, Marek Smaga et Tilmann Beck. « Investigations of Very High Cycle Fatigue Behavior of Metastable Austenitic Steels Using Servohydraulic and Ultrasonic Testing Systems ». Dans ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-84639.
Texte intégralMartinez, Luis Lopez, Zuheir Barsoum et Anna Paradowska. « State-of-the-Art : Fatigue Life Extension of Offshore Installations ». Dans ASME 2012 31st International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/omae2012-83044.
Texte intégralScott-Emuakpor, Onome, Tommy George, Casey Holycross, Jeffrey Brown et Joseph Beck. « Fatigue Behavior Comparisons Between Ultrasonic and Servohydraulic Axial Testing Procedures ». Dans ASME Turbo Expo 2016 : Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/gt2016-56387.
Texte intégralDaugela, Antanas, Vytautas Blechertas, Oden L. Warren, Hiroshi Kutomi et Thomas J. Wyrobek. « Ultra-Thin Film Ultrasonic Characterization ». Dans STLE/ASME 2003 International Joint Tribology Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/2003-trib-0276.
Texte intégralZhang, Ming, Weiqiang Wang et Aiju Li. « The Effects of Specimen Size on the Very High Cycle Fatigue Properties of FV520B-I ». Dans ASME 2015 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/pvp2015-45934.
Texte intégralYan, Ling, Lijia Luo, Fengping Zhong, Zuming Zhao, Jingjing Fan, Liuyi Huang, Shiyi Bao et Jianfeng Mao. « Detection of Fatigue Damage in Aluminum Alloy Structures Using Nonlinear Ultrasonic Modulation ». Dans ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-73423.
Texte intégralMichaels, Thomas E., Jennifer E. Michaels, Adam C. Cobb, Donald O. Thompson et Dale E. Chimenti. « SIMULTANEOUS ULTRASONIC MONITORING OF CRACK GROWTH AND DYNAMIC LOADS DURING A FULL SCALE FATIGUE TEST OF AN AIRCRAFT WING ». Dans REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION : Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation. AIP, 2009. http://dx.doi.org/10.1063/1.3114128.
Texte intégral