Littérature scientifique sur le sujet « Traitements de surface – Environnement »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Traitements de surface – Environnement ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Traitements de surface – Environnement"
Vergniault, Christophe, Martin Blouin et Thomas Tscharner. « Pistes d’optimisation des acquisitions sismiques de proche surface en environnement complexe, applicables pour des projets géotechniques ». E3S Web of Conferences 504 (2024) : 04001. http://dx.doi.org/10.1051/e3sconf/202450404001.
Texte intégralCharles, Jérémie, Grégorio Crini, Bertrand Sancey, Giuseppe Trunfio, Pierre-Marie Badot, Nadia Morin-Crini, Jean-François Minary et al. « Suivi et optimisation d’une station de décontamination des eaux usées de la filière traitement de surface : abattement chimique et impact écotoxicologique ». Revue des sciences de l’eau 24, no 4 (24 janvier 2012) : 329–41. http://dx.doi.org/10.7202/1007623ar.
Texte intégralLamrini, Bouchra, Marie-Véronique Le Lann, El Khadir Lakhal et Ahmed Benhammou. « Gestion supervisée d’une unité de coagulation pour la potabilisation des eaux à partir d’une méthodologie d’apprentissage et d’expertise ». Revue des sciences de l'eau 20, no 4 (21 janvier 2008) : 325–38. http://dx.doi.org/10.7202/016908ar.
Texte intégralIshiaku, Y. M., U. Abdullahi et N. J. Ogundun. « Improvement of leucaena (Leucaena leucocephala) Benth. seeds emergence using hot saline water treatment durations ». Nigerian Journal of Animal Production 49, no 1 (25 février 2022) : 333–39. http://dx.doi.org/10.51791/njap.v49i1.3433.
Texte intégralBONNEAU, M., J. Y. DOURMAD, B. LEBRET, M. C. MEUNIER-SALAÜN, S. ESPAGNOL, Y. SALAÜN, P. LETERME et H. VAN DER WERF. « Evaluation globale des systèmes de production porcine et leur optimisation au niveau de l’exploitation ». INRAE Productions Animales 21, no 4 (27 septembre 2008) : 367–86. http://dx.doi.org/10.20870/productions-animales.2008.21.4.3413.
Texte intégralMajo, François, et Michael Nicolas. « Rôle des cellules souches épithéliales de la cornée et de leur micro-environnement dans le traitement des destructions de la surface oculaire ». Biologie Aujourd'hui 207, no 2 (2013) : 97–108. http://dx.doi.org/10.1051/jbio/2013012.
Texte intégralGUYOMARD, H., B. COUDURIER et P. HERPIN. « Avant-propos ». INRAE Productions Animales 22, no 3 (17 avril 2009) : 147–50. http://dx.doi.org/10.20870/productions-animales.2009.22.3.3341.
Texte intégralJosnin, Matthieu. « Environnement et indications des traitements endoveineux par sclérothérapie ». JMV-Journal de Médecine Vasculaire 48 (mars 2023) : S13. http://dx.doi.org/10.1016/j.jdmv.2022.12.098.
Texte intégralDesconnets, Jean-Christophe, et Mathieu Kazmierski. « Mutualiser des données spatiales et des traitements en environnement ». Ingénierie des systèmes d'information 20, no 3 (28 juin 2015) : 89–115. http://dx.doi.org/10.3166/isi.20.3.89-115.
Texte intégralLapierre, Simon, et Dominique Damant. « Les mauvais traitements envers les enfants et les adolescents ». Service social 51, no 1 (24 juillet 2006) : 98–109. http://dx.doi.org/10.7202/012714ar.
Texte intégralThèses sur le sujet "Traitements de surface – Environnement"
Dubs, Patrice. « Etude d'un jet d'azote supercritique utilisé dans un prototype industriel de traitement de surface à faible impact environnemental ». Electronic Thesis or Diss., Nancy 1, 2010. http://www.theses.fr/2010NAN10121.
Texte intégralA new and efficient process of surface treatment is developed and exists in prototype form at present. The process aims at injecting an inert gas, such as nitrogen, at supercritical conditions through a nozzle. The jet resulting from the expansion of the fluid at high pressure and supercritical temperature impinges normally a flat surface. Alternatively to water jet technologies, which need expansive purification of water after use, and to other classical surface treatment process, this process provides environmental (no generation of additional waste), technical (action on the coating) and energetical (efficiency) benefits. However, the physical phenomena involved in the jet are still poorly understood at present. To understand and model these phenomena, numerical analysis is presented. This analysis is part of a study strategy that aims at gradually increasing the complexity of modeling. A first model aims at describing the evolution of the fluid in time and space, assuming a compressible axisymmetric viscous flow. In this model, the fluid is assumed perfect. A direct extension of this model is then presented where real fluid effects are taken into account in the compressible flow. These models are implemented in finite volume CFD code. Test cases are studied to validate the numerical models. A study of industrial-type configurations, representative of the conditions of use of the process of surface treatment by nitrogen is then conducted
Hommel, Thierry. « Environnement et stratégies des firmes industrielles : le modèle de la gestion anticipative de la contestabilité appliqué à la production des OGM agricoles et à l'industrie du traitement de surface en France et en Allemagne ». Paris, EHESS, 2001. http://www.theses.fr/2001EHES0053.
Texte intégralRaymond, Gaëlle. « Réduction des impacts environnementaux des ateliers de traitement de surface : application de stratégies de production plus propre et plus sûre ». Phd thesis, Ecole Nationale Supérieure des Mines de Saint-Etienne, 2009. http://tel.archives-ouvertes.fr/tel-00786001.
Texte intégralDubs, Patrice. « Etude d'un jet d'azote supercritique utilisé dans un prototype industriel de traitement de surface à faible impact environnemental ». Thesis, Nancy 1, 2010. http://www.theses.fr/2010NAN10121/document.
Texte intégralA new and efficient process of surface treatment is developed and exists in prototype form at present. The process aims at injecting an inert gas, such as nitrogen, at supercritical conditions through a nozzle. The jet resulting from the expansion of the fluid at high pressure and supercritical temperature impinges normally a flat surface. Alternatively to water jet technologies, which need expansive purification of water after use, and to other classical surface treatment process, this process provides environmental (no generation of additional waste), technical (action on the coating) and energetical (efficiency) benefits. However, the physical phenomena involved in the jet are still poorly understood at present. To understand and model these phenomena, numerical analysis is presented. This analysis is part of a study strategy that aims at gradually increasing the complexity of modeling. A first model aims at describing the evolution of the fluid in time and space, assuming a compressible axisymmetric viscous flow. In this model, the fluid is assumed perfect. A direct extension of this model is then presented where real fluid effects are taken into account in the compressible flow. These models are implemented in finite volume CFD code. Test cases are studied to validate the numerical models. A study of industrial-type configurations, representative of the conditions of use of the process of surface treatment by nitrogen is then conducted
Chahboun, Najat. « Compréhension des mécanismes de colmatage des couches anodisées sur alliages d’aluminium aéronautiques et développement de nouvelles formulations de colmatage ». Electronic Thesis or Diss., Université de Lorraine, 2015. http://www.theses.fr/2015LORR0318.
Texte intégralAluminium alloys are very used in the aircraft industry as structural materials because of their low density and their good mechanical properties. They have a polyphase microstructure that is causing electrochemical discontinuities and increasing sensitivity to corrosion. A system of protective coatings containing chromate Cr(+VI) is traditionally formed at the surface of these alloys. However, the REACH environmental guidelines impose Cr(+VI) surface treatments replacement because of chromate carcinogenicity. The aim of the thesis work has been the development of a new surface treatment constituted of a sulfuric acid anodizing (SAA) and a sulfate chromium and fluorozirconate salts sealing (Cr3+/ ZrF62-). The study of the SAA electrochemical process linked the alloys microstructure and the anodic layer porous morphology developed at their surface. The Cr3+ / ZrF62- sealing treatment is realized by a simple immersion of the anodized alloy in the solution. It is demonstrated that the sealing is caused by a local alkalinization of the anodized coating surface that leads to the precipitation of the Cr3+ and ZrF62- salts. These ones are forming a sealing film of about 300 nm thick, very covering of the nanometric pores. The anodic layers sealing greatly improves the corrosion resistance of the anodized alloys by forming an additional barrier against corrosive agents and by healing the corrosion initiation. The developed treatment allows both to achieve Cr(+VI) treatments performance over a wide range of alloys and to satisfy the environmental requirements
Charles, Jérémie. « Procédés physico-chimiques de décontamination et impact des rejets aqueux de la filière traitement de surface : approches chimique et écotoxicologique ». Thesis, Besançon, 2012. http://www.theses.fr/2012BESA2040.
Texte intégralThe surface treatment (ST) industry is currently undergoing major upheavals, particularly concerning environmental aspects, due to increasingly stringent standards. ST uses large volumes of water and chemicals in its manufacturing processes and its wastewater is acknowledged as being among the most polluting. The main environmental problem facing ST plants is the high pollution load of the effluent they generate. In this thesis, we analyzed and optimized three physicochemical units for the treatment of ST industrial wastewaters. We present the abatements obtained in the levels of pollution after the various chemical optimizations validated in the laboratory and then transposed to the industrial site. To evaluate the utility of each optimization proposal, bioassays using three bioindicators (Daphnia magna, Gammarus pulex, Lactuca sativa) were also carried out on the effluents of the treatment plants. The results showed that discharge waters were characterized by a polycontamination, organic and metallic, highly variable in time. These effluents also presented a high toxicity towards the bioindicators studied. Bioassays confirmed the preponderant role of metal in the toxicity. The optimization of the station and chemical treatment proposed reduced the organic load and the concentrations of metals. Decreasing pollutant concentrations in the wastewaters led to a significant reduction of their toxicity on the three bioindicators. This demonstrates that there is a relationship between “chemical efficiency” and “reduction of environmental impact”
Saulais, Muriel. « Colonisation végétale des basins d'infiltration et de rétention : caractérisation de la flore et évolution des caractéristiques physico-chimiques de l'horizon de surface végétalisé ». Phd thesis, INSA de Lyon, 2011. http://tel.archives-ouvertes.fr/tel-00715802.
Texte intégralCoetsier, Clémence. « Approche intégrée de la gestion environnementale Des produits pharmaceutiques dans des rejets de Stations d'épuration urbaines et leur milieu récepteur : occurrence, impact et traitements tertiaires d'élimination ». Phd thesis, Université Montpellier II - Sciences et Techniques du Languedoc, 2009. http://tel.archives-ouvertes.fr/tel-00625971.
Texte intégralCoetsier, Clémence. « Approche intégrée de la gestion environnementale des produits pharmaceutiques dans des rejets de stations d’épuration urbaines et leur milieu récepteur : occurrence, impact et traitements tertiaires d'élimination ». Montpellier 2, 2009. http://www.theses.fr/2009MON20105.
Texte intégralPharmaceutical products (PPs), widely consumed by population and discharged in the environment through wastewater treatment process (WTP), are sources of aquatic ecosystems contamination. Environmental risk assessment for these substances involves the accurate quantification of their concentrations and the evaluation of their toxicity for exposed species. Our study dealing with a dozen of representative pharmaceutical compounds was conducted in Southeast France. A LC-MS/MS detection method was developed and a sampling campaign was carried out on 7 urban WTP and the natural waters where they discharge (rivers of the Gard and pond) in order to assess PPs contamination level. Toxicity of PPs was estimated using bioluminescent and growth inhibition tests (Microtox, ToxScreen and Protoxkit). Experiments were conducted to evaluate UV photolysis and activated carbon adsorption capacities for the removal of these compounds. Measurements for samples collected highlight the occurrence of PPs in WTP effluent of Southeast region at concentrations ranging from 10 to 1000 ng. L-1 and reaching hundreds of ng. L-1 in the downstream surface waters. Comparison between the level of exposure and experimental toxicity values completed by literature data suggests that only 3 compounds (propranolol, ibuprofen and diclofénac) may induce a low risk at a local scale (rivers of Gard). Complementary treatments of the STP effluents by UV photolysis and activated carbon adsorption prove to be efficient to remove most of the 12 studied PPs and should be considered to reduce the presence and the impact of pharmaceutical products in the environment
Leveillard, Florine. « Méthodologie de minimisation de la pollution appliquée au traitement de surface : étude de l’entraînement comme vecteur de pollution ». Thesis, Saint-Etienne, EMSE, 2011. http://www.theses.fr/2011EMSE0598/document.
Texte intégralCurrently, via the prevention principle, environmental regulations incite industries to implement strategies to reduce the pollution at the source (ICPE, IPPC, IED). Industries are sometimes lost in front of various proposed technical solutions. The application of cleaner production strategies such as good operational procedures and good practices of management allow to answer these constraints.The metal finishing activity uses a lot of water and chemicals and thus generates polluted effluents. The objective of this work is to propose a simple methodology of limitation of the pollution flows and of the water specific consumption of metal finishing workshops.Then, experimental studies have allowed, on one hand, to create an easy method of the drag-out calculation and, on the other hand, to show and to quantify the influence of different parameters on the drag-out, from a qualitative and quantitative point of view. They are, for example, the shape and the roughness of the treated pieces, the draining time, the superficial tension of the treatment solutions but also the stirring type and duration of rinsing.All these elements, integrated into the methodology of pollution minimization, allow to realize a diagnosis of the process line. Moreover, it permits to estimate the impact of a modification of this installation on the specific consumption of water, on the pollution balance assessment and on the rinsing quality. So, this methodology can help to optimize and to limit consumptions of water and chemicals not only on the process line but also in wastewater treatment plant, so decreasing the environmental impacts and the running costs
Livres sur le sujet "Traitements de surface – Environnement"
Charrin, Pierre. Guide pratique des rinçages statiques et courants en traitements de surface. Paris : Libr. de traitements de surface, 1985.
Trouver le texte intégralMathieu, Hans Jo rg. Traite des mate riaux : Analyse et technologie des surfaces : couches minces et tribologie. Lausanne : Presses polytechniques et universitaires romandes, 2003.
Trouver le texte intégralChevalier, Sébastien. Traitements de surface et nouveaux materiaux : Quelles solutions pour lutter contre la dégradation des matériaux à haute temperature ? Dijon : Éd. universitaires de Dijon, 2007.
Trouver le texte intégralConference, International Thermal Spray. Thermal spray : Meeting the challenges of the 21st century : proceedings of the 15th International Thermal Spray Conference, 25-29 May 1998, Nice, France. Materials Park, OH : ASM International, 1998.
Trouver le texte intégralJ, Alloway Brian, Kröpfelová Lenka, Trevors Jack T. 1953- et SpringerLink (Online service), dir. Wastewater Treatment in Constructed Wetlands with Horizontal Sub-Surface Flow. Dordrecht : Springer Science + Business Media B.V, 2008.
Trouver le texte intégralRuimi, Michel. Traitements de surface des matériaux par voie humide. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1096-3.
Texte intégralRuimi, Michel. Traitements de Surface des Matériaux Par Voie Humide : Dysfonctionnements : Origines, Effets, Solutions. EDP Sciences, 2021.
Trouver le texte intégralVymazal, Jan, et Lenka Kröpfelová. Wastewater Treatment in Constructed Wetlands with Horizontal Sub-Surface Flow. Springer, 2010.
Trouver le texte intégralChapitres de livres sur le sujet "Traitements de surface – Environnement"
« Chapitre 8 • Environnement : solutions alternatives des procédés de traitements de surface par voie humide touchés par les contraintes environnementales ». Dans Traitements de surface des matériaux par voie humide, 373–412. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1096-3-011.
Texte intégral« Chapitre 8 • Environnement : solutions alternatives des procédés de traitements de surface par voie humide touchés par les contraintes environnementales ». Dans Traitements de surface des matériaux par voie humide, 373–412. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1096-3.c011.
Texte intégralRoux, Valentine, et Marie-Agnès Courty. « Les traitements de surface ». Dans Des céramiques et des hommes, 129–36. Presses universitaires de Paris Nanterre, 2016. http://dx.doi.org/10.4000/books.pupo.25407.
Texte intégralCoqueugniot, Hélène. « Paléo-imagerie par rayons X : une méthode d’exploration transdisciplinaire, de l’archéologie à la chirurgie Hélène ». Dans Regards croisés : quand les sciences archéologiques rencontrent l'innovation, 139–56. Editions des archives contemporaines, 2017. http://dx.doi.org/10.17184/eac.3794.
Texte intégralBACROIX, Brigitte. « Les post-traitements en fabrication additive ». Dans La fabrication additive des alliages métalliques 2, 105–67. ISTE Group, 2022. http://dx.doi.org/10.51926/iste.9055.ch2.
Texte intégral« 1 Surface propre et environnement ultra-vide ». Dans Les surfaces solides : concepts et méthodes, 165–72. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0293-7-012.
Texte intégral« 1 Surface propre et environnement ultra-vide ». Dans Les surfaces solides : concepts et méthodes, 165–72. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0293-7.c012.
Texte intégral« Chapitre 5 • Gammes de préparations de surface ». Dans Traitements de surface des matériaux par voie humide, 179–202. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1096-3-008.
Texte intégral« Chapitre 5 • Gammes de préparations de surface ». Dans Traitements de surface des matériaux par voie humide, 179–202. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1096-3.c008.
Texte intégral« Chapitre 4 • Contamination des bains de traitements de surface ». Dans Traitements de surface des matériaux par voie humide, 153–78. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1096-3-007.
Texte intégralActes de conférences sur le sujet "Traitements de surface – Environnement"
Daas, M., et K. Dada. « Le flux numérique en implantologie ». Dans 66ème Congrès de la SFCO. Les Ulis, France : EDP Sciences, 2020. http://dx.doi.org/10.1051/sfco/20206601016.
Texte intégralPelletier, E. « La réalisation de traitements optiques de surface ». Dans Systèmes optiques. Les Ulis, France : EDP Sciences, 1992. http://dx.doi.org/10.1051/sfo/1992012.
Texte intégralKermouche, Guillaume. « Mécanique des surfaces des matériaux métalliques : caractérisation et traitements ». Dans Etats de surface dans les réacteurs nucléaires : enjeux, avancées et perspectives. Les Ulis, France : EDP Sciences, 2017. http://dx.doi.org/10.1051/jtsfen/2017eta04.
Texte intégralFeaugas, X., J. Creus, R. Sabot, H. El Alami, D. Large, M. Sahal, C. Savall et C. Huvier. « Influence d'un état mécanique sur la réactivité de surface en milieux aqueux des métaux c.f.c. » Dans PlastOx 2007 - Mécanismes et Mécanique des Interactions Plasticité - Environnement. Les Ulis, France : EDP Sciences, 2009. http://dx.doi.org/10.1051/ptox/2009016.
Texte intégralAmmeri, Ahmed, Habib Chabchoub, Wafik Hachicha et Faouzi Masmoudi. « Combining Taguchi approach and response surface methodolgy for lot-sizing problem in MTO environnement ». Dans 2015 4th International Conference on Advanced Logistics and Transport (ICALT). IEEE, 2015. http://dx.doi.org/10.1109/icadlt.2015.7136621.
Texte intégralARCHETTI, Renata. « Design of surface drifter for the oil spill monitoring ». Dans SANNIER L., LEVACHER D., JOURDAN M. (2009). Approche économique et validation de méthodes de traitements aux liants hydrauliques de sédiments marins contaminés. Revue Paralia, n° 2, pp s2.1– s2.15. Editions Paralia, 2009. http://dx.doi.org/10.5150/cmcm.2009.058-9.
Texte intégral