Littérature scientifique sur le sujet « Tolerance optimization »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Tolerance optimization ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Tolerance optimization"
Roubíček, Tomáš. « Constrained optimization : A general tolerance approach ». Applications of Mathematics 35, no 2 (1990) : 99–128. http://dx.doi.org/10.21136/am.1990.104393.
Texte intégralG V, Madhavi Reddy, et Sreenivasulu Reddy A. « Assembly Gap Tolerance Calculation Using ANFIS and Cost Function Optimization ». International Journal for Research in Applied Science and Engineering Technology 10, no 2 (28 février 2022) : 1111–17. http://dx.doi.org/10.22214/ijraset.2022.40460.
Texte intégralXu, Rui, Kang Huang, Jun Guo, Lei Yang, Mingming Qiu et Yan Ru. « Gear-tolerance optimization based on a response surface method ». Transactions of the Canadian Society for Mechanical Engineering 42, no 3 (1 septembre 2018) : 309–22. http://dx.doi.org/10.1139/tcsme-2018-0006.
Texte intégralYang, Longbao, Yuejiao Ma et Liheng Zhou. « Fault Tolerance Analysis and Optimization of Centralized Control Platform Based on Artificial Intelligence and Optimization Algorithm ». Scalable Computing : Practice and Experience 25, no 4 (16 juin 2024) : 2621–27. http://dx.doi.org/10.12694/scpe.v25i4.2918.
Texte intégralIRANI, S. A., R. O. MITTAL et E. A. LEHTIHET. « Tolerance chart optimization ». International Journal of Production Research 27, no 9 (septembre 1989) : 1531–52. http://dx.doi.org/10.1080/00207548908942638.
Texte intégralWang, Bingxiang, Xianzhen Huang et Miaoxin Chang. « Reliability-based tolerance redesign of mechanical assemblies using Jacobian-Torsor model ». Science Progress 104, no 2 (avril 2021) : 003685042110132. http://dx.doi.org/10.1177/00368504211013227.
Texte intégralGao, Yuan. « Tolerance analysis and optimization based on 3DCS ». Journal of Physics : Conference Series 2137, no 1 (1 décembre 2021) : 012070. http://dx.doi.org/10.1088/1742-6596/2137/1/012070.
Texte intégralG V, Madhavi Reddy, Vani S et Sreenivasulu Reddy A. « Selection of Optimum Assembly Gap Tolerance for Motor Assembly ». International Journal for Research in Applied Science and Engineering Technology 10, no 4 (30 avril 2022) : 107–12. http://dx.doi.org/10.22214/ijraset.2022.41180.
Texte intégralBalling, Richard J., Joseph C. Free et Alan R. Parkinson. « Consideration of Worst-Case Manufacturing Tolerances in Design Optimization ». Journal of Mechanisms, Transmissions, and Automation in Design 108, no 4 (1 décembre 1986) : 438–41. http://dx.doi.org/10.1115/1.3258751.
Texte intégralLiu, Guanghao, Meifa Huang et Leilei Chen. « Optimization Method of Assembly Tolerance Types Based on Degree of Freedom ». Applied Sciences 13, no 17 (29 août 2023) : 9774. http://dx.doi.org/10.3390/app13179774.
Texte intégralThèses sur le sujet "Tolerance optimization"
Shehabi, Murtaza Kaium. « Cost tolerance optimization for piecewise continuous cost tolerance functions ». Ohio : Ohio University, 2002. http://www.ohiolink.edu/etd/view.cgi?ohiou1174937670.
Texte intégralYue, Junping. « A computerized optimization method for tolerance control ». Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-07112009-040315/.
Texte intégralJrad, Mohamed. « Multidisciplinary Optimization and Damage Tolerance of Stiffened Structures ». Diss., Virginia Tech, 2015. http://hdl.handle.net/10919/52276.
Texte intégralPh. D.
Arenbeck, Henry. « Efficient Reliability-Based Tolerance Optimization for Multibody Systems ». Thesis, The University of Arizona, 2007. http://hdl.handle.net/10150/190380.
Texte intégralBarraja, Mathieu. « TOLERANCE ALLOCATION FOR KINEMATIC SYSTEMS ». UKnowledge, 2004. http://uknowledge.uky.edu/gradschool_theses/315.
Texte intégralChen, Jack Szu-Shen. « Distortion-free tolerance-based layer setup optimization for layered manufacturing ». Thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/27268.
Texte intégralBurlyaev, Dmitry. « Design, Optimization, and Formal Verification of Circuit Fault-Tolerance Techniques ». Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAM058/document.
Texte intégralTechnology shrinking and voltage scaling increase the risk of fault occurrences in digital circuits. To address this challenge, engineers use fault-tolerance techniques to mask or, at least, to detect faults. These techniques are especially needed in safety critical domains (e.g., aerospace, medical, nuclear, etc.), where ensuring the circuit functionality and fault-tolerance is crucial. However, the verification of functional and fault-tolerance properties is a complex problem that cannot be solved with simulation-based methodologies due to the need to check a huge number of executions and fault occurrence scenarios. The optimization of the overheads imposed by fault-tolerance techniques also requires the proof that the circuit keeps its fault-tolerance properties after the optimization.In this work, we propose a verification-based optimization of existing fault-tolerance techniques as well as the design of new techniques and their formal verification using theorem proving. We first investigate how some majority voters can be removed from Triple-Modular Redundant (TMR) circuits without violating their fault-tolerance properties. The developed methodology clarifies how to take into account circuit native error-masking capabilities that may exist due to the structure of the combinational part or due to the way the circuit is used and communicates with the surrounding device.Second, we propose a family of time-redundant fault-tolerance techniques as automatic circuit transformations. They require less hardware resources than TMR alternatives and could be easily integrated in EDA tools. The transformations are based on the novel idea of dynamic time redundancy that allows the redundancy level to be changed "on-the-fly" without interrupting the computation. Therefore, time-redundancy can be used only in critical situations (e.g., above Earth poles where the radiation level is increased), during the processing of crucial data (e.g., the encryption of selected data), or during critical processes (e.g., a satellite computer reboot).Third, merging dynamic time redundancy with a micro-checkpointing mechanism, we have created a double-time redundancy transformation capable of masking transient faults. Our technique makes the recovery procedure transparent and the circuit input/output behavior remains unchanged even under faults. Due to the complexity of that method and the need to provide full assurance of its fault-tolerance capabilities, we have formally certified the technique using the Coq proof assistant. The developed proof methodology can be applied to certify other fault-tolerance techniques implemented through circuit transformations at the netlist level
Morales, Reyes Alicia. « Fault tolerant and dynamic evolutionary optimization engines ». Thesis, University of Edinburgh, 2011. http://hdl.handle.net/1842/4882.
Texte intégralKANSARA, SHARAD MAHENDRA. « AN EFFICIENT SEQUENTIAL INTEGER OPTIMIZATION TECHNIQUE FOR PROCESS PLANNING AND TOLERANCE ALLOCATION ». University of Cincinnati / OhioLINK, 2003. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1069798466.
Texte intégralIzosimov, Viacheslav. « Scheduling and Optimization of Fault-Tolerant Embedded Systems ». Licentiate thesis, Linköping University, Linköping University, ESLAB - Embedded Systems Laboratory, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-7654.
Texte intégralSafety-critical applications have to function correctly even in presence of faults. This thesis deals with techniques for tolerating effects of transient and intermittent faults. Reexecution, software replication, and rollback recovery with checkpointing are used to provide the required level of fault tolerance. These techniques are considered in the context of distributed real-time systems with non-preemptive static cyclic scheduling.
Safety-critical applications have strict time and cost constrains, which means that not only faults have to be tolerated but also the constraints should be satisfied. Hence, efficient system design approaches with consideration of fault tolerance are required.
The thesis proposes several design optimization strategies and scheduling techniques that take fault tolerance into account. The design optimization tasks addressed include, among others, process mapping, fault tolerance policy assignment, and checkpoint distribution.
Dedicated scheduling techniques and mapping optimization strategies are also proposed to handle customized transparency requirements associated with processes and messages. By providing fault containment, transparency can, potentially, improve testability and debugability of fault-tolerant applications.
The efficiency of the proposed scheduling techniques and design optimization strategies is evaluated with extensive experiments conducted on a number of synthetic applications and a real-life example. The experimental results show that considering fault tolerance during system-level design optimization is essential when designing cost-effective fault-tolerant embedded systems.
Livres sur le sujet "Tolerance optimization"
L, Palumbo Daniel, Arras Michael K et Langley Research Center, dir. Performance and fault-tolerance of neural networks for optimization. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1991.
Trouver le texte intégralL, Palumbo Daniel, Arras Michael K et Langley Research Center, dir. Performance and fault-tolerance of neural networks for optimization. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1991.
Trouver le texte intégralL, Palumbo Daniel, Arras Michael K et Langley Research Center, dir. Performance and fault-tolerance of neural networks for optimization. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1991.
Trouver le texte intégralFinckenor, J. CORSSTOL : Cylinder optimization of rings, skin, and stringers with tolerance sensitivity. Washington, D.C : National Aeronautics and Space Administration, 1995.
Trouver le texte intégralCakaj, Shkelzen, dir. Modeling Simulation and Optimization - Tolerance and Optimal Control. InTech, 2010. http://dx.doi.org/10.5772/211.
Texte intégralModeling Simulation and Optimization - Tolerance and Optimal Control. InTech, 2010.
Trouver le texte intégralLeondes, Cornelius T. Structural Dynamic Systems Computational Techniques and Optimization : Reliability and Damage Tolerance (Engineering, Technology and Applied Science , Vol 10). Taylor & Francis, 1999.
Trouver le texte intégralPardalos, Panos M., Boris Goldengorin, Gerold Jäger et Marcel Turkensteen. Calculus of Tolerances in Combinatorial Optimization : Theory and Algorithms. Springer, 2016.
Trouver le texte intégralGoberna, Miguel A., et Marco A. López. Post-Optimal Analysis in Linear Semi-Infinite Optimization. Springer London, Limited, 2014.
Trouver le texte intégralPostoptimal Analysis In Linear Semiinfinite Optimization. Springer-Verlag New York Inc., 2014.
Trouver le texte intégralChapitres de livres sur le sujet "Tolerance optimization"
Jiang, Chao, Xu Han et Huichao Xie. « Interval Optimization Considering Tolerance Design ». Dans Nonlinear Interval Optimization for Uncertain Problems, 247–58. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8546-3_12.
Texte intégralHadjihassan, Sevgui, Eric Walter et Luc Pronzato. « Quality Improvement via Optimization of Tolerance Intervals During the Design Stage ». Dans Applied Optimization, 91–131. Boston, MA : Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-3440-8_5.
Texte intégralFotakis, Dimitris A., et Paul G. Spirakis. « Machine Partitioning and Scheduling under Fault-Tolerance Constraints ». Dans Nonconvex Optimization and Its Applications, 209–44. Boston, MA : Springer US, 2000. http://dx.doi.org/10.1007/978-1-4757-3145-3_14.
Texte intégralXu, Bensheng, Can Wang et Hongli Chen. « Functional Tolerance Optimization Design for Datum System ». Dans Lecture Notes in Electrical Engineering, 1427–34. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3648-5_184.
Texte intégralBosse, Sascha, et Klaus Turowski. « Optimization of Data Center Fault Tolerance Design ». Dans Engineering and Management of Data Centers, 141–62. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-65082-1_7.
Texte intégralRazaaly, Nassim, Giacomo Persico et Pietro Marco Congedo. « Tolerance Optimization of Supersonic ORC Turbine Stator ». Dans Proceedings of the 3rd International Seminar on Non-Ideal Compressible Fluid Dynamics for Propulsion and Power, 78–86. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69306-0_9.
Texte intégralZavala, Angel E. Muñoz, Arturo Hernández Aguirre et Enrique R. Villa Diharce. « Continuous Constrained Optimization with Dynamic Tolerance Using the COPSO Algorithm ». Dans Constraint-Handling in Evolutionary Optimization, 1–23. Berlin, Heidelberg : Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-00619-7_1.
Texte intégralLombraña González, Daniel, Juan Luís Jiménez Laredo, Francisco Fernández de Vega et Juan Julián Merelo Guervós. « Characterizing Fault-Tolerance of Genetic Algorithms in Desktop Grid Systems ». Dans Evolutionary Computation in Combinatorial Optimization, 131–42. Berlin, Heidelberg : Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-12139-5_12.
Texte intégralFotakis, Dimitris A., et Paul G. Spirakis. « Efficient Redundant Assignments under Fault-Tolerance Constraints ». Dans Randomization, Approximation, and Combinatorial Optimization. Algorithms and Techniques, 156–67. Berlin, Heidelberg : Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-540-48413-4_17.
Texte intégralHoffenson, Steven, Andreas Dagman et Rikard Söderberg. « Tolerance Specification Optimization for Economic and Ecological Sustainability ». Dans Lecture Notes in Production Engineering, 865–74. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-30817-8_85.
Texte intégralActes de conférences sur le sujet "Tolerance optimization"
Jayakaran, Christopher, Ragini Patel, Prashant Momaya, K. Roopesh, Umeshchandra Ananthanarayana et Gautam Sardar. « Taking the Grunt Work Out of Tolerance Optimization ». Dans ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95579.
Texte intégralRoth, Martin, Markus Johannes Seitz, Benjamin Schleich et Sandro Wartzack. « Coupling Sampling-Based Tolerance-Cost Optimization and Selective Assembly – An Integrated Approach for Optimal Tolerance Allocation ». Dans ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-88775.
Texte intégralParkinson, Alan, Carl Sorensen, Joseph Free et Bradley Canfield. « Tolerances and Robustness in Engineering Design Optimization ». Dans ASME 1990 Design Technical Conferences. American Society of Mechanical Engineers, 1990. http://dx.doi.org/10.1115/detc1990-0015.
Texte intégralGadallah, M. H., et H. A. ElMaraghy. « The Tolerance Optimization Problem Using a System of Experimental Design ». Dans ASME 1994 Design Technical Conferences collocated with the ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/detc1994-0067.
Texte intégralShoukr, David Sh L., Mohamed H. Gadallah et Sayed M. Metwalli. « The Reduced Tolerance Allocation Problem ». Dans ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65848.
Texte intégralLavoie, Andrew. « Lichten Award Paper : Variational Tolerance Analysis (VTA) - Design and Manufacturing Optimization Using Statistical Simulation ». Dans Vertical Flight Society 77th Annual Forum & Technology Display. The Vertical Flight Society, 2021. http://dx.doi.org/10.4050/f-0077-2021-16817.
Texte intégralTsai, Jhy-Cherng, et Chin-Ming Shih. « Computer-Aided Linear Tolerance Analysis and Optimal Tolerance Distribution for Cylindrical Machined Parts ». Dans ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/dac-5804.
Texte intégralChen, Shaoqiang, Hui Wang et Qiang Huang. « Multistage Machining Process Design and Optimization Using Error Equivalence Method ». Dans ASME 2009 International Manufacturing Science and Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/msec2009-84359.
Texte intégralEl-Haik, Basem, et Kai Yang. « Tolerance Design : An Axiomatic Perspective ». Dans ASME 1999 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/detc99/dac-8706.
Texte intégralKrishnaswami, Mukund, et R. W. Mayne. « Optimizing Tolerance Allocation Based on Manufacturing Cost and Quality Loss ». Dans ASME 1994 Design Technical Conferences collocated with the ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/detc1994-0063.
Texte intégralRapports d'organisations sur le sujet "Tolerance optimization"
Olivas, Eric Richard, Michael Jeffrey Mocko et Keith Albert Woloshun. Target Optimization Study : Tolerance Sensitivity. Office of Scientific and Technical Information (OSTI), avril 2020. http://dx.doi.org/10.2172/1615652.
Texte intégralWang, L., et S. N. Atluri. Automated Structural Optimization System (ASTROS) Damage Tolerance Module. Volume 2 - User's Manual. Fort Belvoir, VA : Defense Technical Information Center, février 1999. http://dx.doi.org/10.21236/ada375881.
Texte intégralWang, L., et S. N. Atluri. Automated Structural Optimization System (ASTROS) Damage Tolerance Module. Volume 1 - Final Report. Fort Belvoir, VA : Defense Technical Information Center, février 1999. http://dx.doi.org/10.21236/ada375882.
Texte intégralWang, L., et S. N. Atluri. Automated Structural Optimization System (ASTROS) Damage Tolerance Module. Volume 3. Interface Design Document. Fort Belvoir, VA : Defense Technical Information Center, février 1999. http://dx.doi.org/10.21236/ada375883.
Texte intégralSteirer, K. Xerxes, Angus Rockett, Michael Irwin et Joseph Berry. Final Technical Report : Multi-Messenger In-situ Tolerance Optimization of Mixed Perovskite Photovoltaics. Office of Scientific and Technical Information (OSTI), mars 2021. http://dx.doi.org/10.2172/1772188.
Texte intégralDarling, Arthur H., et William J. Vaughan. The Optimal Sample Size for Contingent Valuation Surveys : Applications to Project Analysis. Inter-American Development Bank, avril 2000. http://dx.doi.org/10.18235/0008824.
Texte intégral