Littérature scientifique sur le sujet « Thermal and Thermokinetic Characterization »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Thermal and Thermokinetic Characterization ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Thermal and Thermokinetic Characterization"
Erişkin, Selinay Y., Fatma Ç. Telli, Yeliz Yıldırım et Yeşim Salman. « Synthesis, Characterization, and Thermokinetic Analysis of New Epoxy Sugar Derivative ». Journal of Chemistry 2014 (2014) : 1–6. http://dx.doi.org/10.1155/2014/737953.
Texte intégralAl-Maydama, Hussein, Tajedin Yahya Al-Ansi, Yasmin M. S. Jamil et A. H. Ali. « Biheterocyclic ligands : synthesis, characterization and coordinating properties of bis(4-amino-5-mercapto-1,2,4-triazol-3-yl) alkanes with transition metal ions and their thermokinetic and biological studies ». Ecletica Quimica 33, no 3 (29 septembre 2008) : 29–42. http://dx.doi.org/10.26850/1678-4618eqj.v33.3.2008.p29-42.
Texte intégralAversa, Raffaella, Laura Ricciotti, Valeria Perrotta et Antonio Apicella. « Thermokinetic and Chemorheology of the Geopolymerization of an Alumina-Rich Alkaline-Activated Metakaolin in Isothermal and Dynamic Thermal Scans ». Polymers 16, no 2 (11 janvier 2024) : 211. http://dx.doi.org/10.3390/polym16020211.
Texte intégralPaglia, L., V. Genova, M. P. Bracciale, C. Bartuli, F. Marra, M. Natali et G. Pulci. « Thermochemical characterization of polybenzimidazole with and without nano-ZrO2 for ablative materials application ». Journal of Thermal Analysis and Calorimetry 142, no 5 (28 octobre 2020) : 2149–61. http://dx.doi.org/10.1007/s10973-020-10343-4.
Texte intégralPetrova-Burkina, O. A., V. V. Rubanik Jr. et V. V. Rubanik. « Thermokinetic EMF during a reverse phase transition in titanium nickelide as a way of information recording ». Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 66, no 3 (12 octobre 2021) : 329–34. http://dx.doi.org/10.29235/1561-8358-2021-66-3-329-334.
Texte intégralPetrova-Burkina, O. A., V. V. Rubanik, Jr., V. V. Rubanik et T. V. Gamzeleva. « Influence of heat treatment on thermokinetic EMF during reverse phase transition in titanium nickelide ». Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 65, no 4 (31 décembre 2020) : 413–21. http://dx.doi.org/10.29235/1561-8358-2020-65-4-413-421.
Texte intégralPetrova-Burkina, O. A., V. V. Rubanik, Jr., V. V. Rubanik et T. V. Gamzeleva. « Influence of heat treatment on thermokinetic EMF during reverse phase transition in titanium nickelide ». Proceedings of the National Academy of Sciences of Belarus, Physical-Technical Series 65, no 4 (31 décembre 2020) : 413–21. http://dx.doi.org/10.29235/1561-8358-2020-65-4-413-421.
Texte intégralStrobel, Hans. « Thermokinetic compartment models of thermal decomposition reactions ». Thermochimica Acta 112, no 2 (mars 1987) : 179–86. http://dx.doi.org/10.1016/0040-6031(87)88275-8.
Texte intégralMuravyev, Nikita V., Giorgio Luciano, Heitor Luiz Ornaghi, Roman Svoboda et Sergey Vyazovkin. « Artificial Neural Networks for Pyrolysis, Thermal Analysis, and Thermokinetic Studies : The Status Quo ». Molecules 26, no 12 (18 juin 2021) : 3727. http://dx.doi.org/10.3390/molecules26123727.
Texte intégralDelgado R, E. J. « A Thermal Engine Driven by a Thermokinetic Oscillator ». Journal of Physical Chemistry 100, no 26 (janvier 1996) : 11144–47. http://dx.doi.org/10.1021/jp9514234.
Texte intégralThèses sur le sujet "Thermal and Thermokinetic Characterization"
Flity, Hassan. « Modélisation de la dégradation et combustion du bois de construction ». Electronic Thesis or Diss., Université de Lorraine, 2023. http://www.theses.fr/2023LORR0250.
Texte intégralThe use of wood in construction offers numerous advantages, but also poses fire safety risks. Several studies available in the literature, whether experimental or numerical, have investigated the fire behavior of wood. However, the diverse and varied results do not allow the identification of the intrinsic behavior of wood, and regulatory frameworks have to rely on numerous simplifying assumptions. The objective of this thesis is to study the thermal degradation of wood at the cone calorimeter scale. The uniqueness of the study lies in the adoption of an increasingly complex approach, the use of meticulous metrology, and the most comprehensive characterization of the properties of the wood samples under investigation. Degradation involves numerous interacting processes such as drying, pyrolysis, and combustion with or without flames, resulting in heat and mass transfer. Given the complexity of studying all these phenomena simultaneously, the strategy adopted was to separate the different phenomena as much as possible through models and specific experiments. In order to overcome the problem of drying and hydric transfer, all the work was carried out on dry wood. First, specific characterization methods were used to determine the thermal properties of wood and charcoal. These experiments helped to establish behavioral laws for some of these properties, facilitating their integration into a model. Subsequently, an experimental campaign was conducted at the material scale of wood using techniques such as thermogravimetric analysis and differential scanning calorimetry under an inert atmosphere. At this scale, wood is thermally thin, which allowed the development of a kinetic model capable of predicting mass loss, mass loss rate, and heat absorbed or generated by wood during pyrolysis as a function of temperature. Next, an experimental campaign was carried out on wood samples at the scale of the cone calorimeter in an inert atmosphere to validate the 3D pyrolysis model developed to predict wood pyrolysis in the absence of combustion, driven primarily by heat transfer within the material. Finally, tests in an air environment were conducted for a comprehensive modeling of dry wood combustion, which requires a precise characterization of char combustion, the associated heat generated, and the heat flux supplied by the flame
De, Indrayush. « Thermal characterization of nanostructures using scanning thermal microscopy ». Thesis, Bordeaux, 2017. http://www.theses.fr/2017BORD0563/document.
Texte intégralThe objective of this thesis is to master quantitative aspects when using nearfield thermal microscopy by using the scanning thermal microscopy technique (SThM). We start by taking an in-depth look into the work performed previously by other scientist and research organizations. From there, we understand the progress the SThM probes have made through the decades, understand the probe sensitivity to the range of conductivity of the materials under investigation, verify the resistances encountered when the probe comes in contact with the sampl and the applications of SThM.Then we look into the equipment necessary for performing tests to characterize material thermal properties. The SThM we use is based on atomic force microscope (AFM) with a thermal probe attached at the end. The AFM is described in this work along with the probes we have utilized.For the purpose of our work, we are only using thermoresistive probes that play the role of the heater and the thermometer. These probes allow us to obtain sample temperature and thermalconductivity. We use two different types of thermal probes – 2-point probe and 4-point probe with SiO2 or with Si3N4 cantilever. Both the probes are very similar when it comes to functioning with the major difference being that the 4-point probe doesn’t have current limiters. Then, we present the use of recent heat-resistive probes allowing to reach a spatial resolution of the orde rof 100 nm under atmosphere and of 30 nm under vacuum. These probes can be used in passive mode for measuring the temperature at the surface of a material or component and in activemode for the determination of the thermal properties of these systems. Using thermoresistive probes means that no specialized devices are necessary for operation. Using simple commercialsolutions like simple AC or DC current and Wheatstone bridge are sufficient to provide basic thermal images. In our case we have also utilized other industrial devices and a home madeSThM setup to further improve the quality of measurement and accuracy. All the elements of the experimental setup have been connected using GPIB and that have been remotely controlled from a computer using a code developed under Python language. This code allows to make the frequency dependent measurement as well as the probe calibration. [...]
Li, Yifan Li. « NANOSCALE THERMAL CHARACTERIZATION BY SCANNING THERMAL MICROSCOPY (STHM) ». University of Akron / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=akron159057422807603.
Texte intégralShope, David Allen 1958. « Thermal characterization of VLSI packaging ». Thesis, The University of Arizona, 1988. http://hdl.handle.net/10150/276686.
Texte intégralCrain, Kevin Richard. « Mechanical characterization and thermal modeling of a MEMS thermal switch ». Online access for everyone, 2005. http://www.dissertations.wsu.edu/Thesis/Fall2005/k%5Fcrain%5F120905.pdf.
Texte intégralFerrando, Villalba Pablo. « Thermal characterization of Si-based nanostructures ». Doctoral thesis, Universitat Autònoma de Barcelona, 2016. http://hdl.handle.net/10803/399339.
Texte intégralThermoelectricity is a promising technology for scavenging energy from environmental temperature differences. The development of materials that transform heat into electricity in a more efficient way making use of this principle is necessary for opening new application niches. Nanostructuring a material has been demonstrated to increase the thermoelectric figure of merit of crystalline materials via a thermal conductivity reduction driven by enhanced phonon scattering. This thesis is committed to give a better insight into the processes that affect thermal transport in potential Si-based nanomaterials for thermoelectric generation. In Chapter 1, a general introduction exposes the need for reducing fossil fuel consumption and generally using renewable energies. Also, the benefit of tuning the thermal conductivity of materials for thermal management applications is discussed. Chapter 2 provides an overview of the theory behind thermal transport. First, the heat equation is derived from the classical irreversible thermodynamics framework. Then, phonons are introduced as heat carrying quasiparticles. The application of the Boltzmann Transport Equation to both phonons and electrons allows understanding the effect of different scattering mechanisms on the thermoelectric properties of materials. Finally, several strategies for enhancing the figure of merit of materials are reviewed. In Chapter 3, the necessary tools for measuring the thermal conductivity of nanomaterials are developed. Two cryostats are set up along with the temperature control systems that allow measuring at stable temperatures. Later, three sensors are developed for measuring the thermal conductivity of different materials. First, suspended structures intended for measuring the in-plane thermal conductivity of suspended membranes and nanowires are fabricated, and the errors and uncertainties produced in such measurements are characterized. Second, the 3ω method is introduced, allowing the measurement of the out-of-plane thermal conductivity in thin films. The emergence of the 3ω voltage is demonstrated, and the relation between this voltage and the thermal conductivity of the substrate and the thin-film is found. Finally, a sensor for the 3ω-Völklein method is developed, which allows characterizing the in-plane thermal conductivity of thin-films during the layer growth. In Chapter 4, the thermal conductivity of suspended Si membranes is measured, finding the expected reduction in thermal conductivity due to phonon surface scattering, as well as confinement effects in the 17.5 nm thick membrane. Moreover, the nanopatterning of these Si membranes with focused ion beam (FIB) is optimized through a systematic study of its amorphization finding an optimal spatial resolution of 200 nm when using 50 μC/cm2. In Chapter 5, the thermal conductivity of porous Si nanowires is studied for wires with different porosity, length and diameters, showing an unexpected dependence on its diameter that suggests that the wire core is generally less porous than the shell. The structural Si thermal conductivity is found to be one fiftieth of that of the bulk, promising a good thermoelectric figure of merit. In Chapter 6, the thermal conductivity of a novel SiGe graded superlattice is measured, showing a considerable reduction in its thermal conductivity, even below the thin-film alloy limit. The measurement of the thickest superlattice confirms the absence of coherent phonon effects. In Chapter 7, the thermal conductance of a suspended SiNx membrane is measured with a high precision while depositing on it organic (TPD) and metallic (Indium) materials. The results show an initial conductance reduction that cannot be explained with the Fourier law. This reduction is found to be related to an increased diffusive boundary scattering, which could be easily extrapolated to other thermoelectric nanomaterials, reducing their thermal conductivity. Also, the growth dynamics of both materials are characterized through their signal in the conductance.
Mutnuri, Bhyrav. « Thermal conductivity characterization of composite materials ». Morgantown, W. Va. : [West Virginia University Libraries], 2006. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=4468.
Texte intégralTitle from document title page. Document formatted into pages; contains vii, 62 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 61-62).
Wei, Xiaohao, et 魏晓浩. « Nanofluids : synthesis, characterization and thermal conductivity ». Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2010. http://hub.hku.hk/bib/B44765861.
Texte intégralHanuska, Alexander Robert Jr. « Thermal Characterization of Complex Aerospace Structures ». Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36617.
Texte intégralMaster of Science
VanDerheyden, Andrew Louis. « Characterization of thermal coupling in chip multiprocessors ». Thesis, Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/51892.
Texte intégralLivres sur le sujet "Thermal and Thermokinetic Characterization"
A, Turi Edith, dir. Thermal characterization of polymeric materials. 2e éd. San Diego : Academic Press, 1997.
Trouver le texte intégralA, Turi Edith, dir. Thermal characterization of polymeric materials. 2e éd. San Diego : Academic Press, 1997.
Trouver le texte intégralA, Watring D., et United States. National Aeronautics and Space Administration., dir. Thermal characterization of the universal multizone crystallizator. [Washington, DC : National Aeronautics and Space Administration, 1995.
Trouver le texte intégralJacobs, Pieter A. Thermal infrared characterization of ground targets and backgrounds. Bellingham, Wash., USA : SPIE Optical Engineering Press, 1996.
Trouver le texte intégralCenter, Langley Research, dir. Thermal characterization and toughness of ethynyl containing blends. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1991.
Trouver le texte intégralThermal infrared characterization of ground targets and backgrounds. 2e éd. Bellingham, WA : SPIE, The International Society for Optical Engineering, 2005.
Trouver le texte intégralJacobs, Pieter A. Thermal infrared characterization of ground targets and backgrounds. 2e éd. Bellingham, Wash : SPIE Press, 2006.
Trouver le texte intégralT, Riga Alan, et Judovits Lawrence 1955-, dir. Materials characterization by dynamic and modulated thermal analytical techniques. West Conshohocken, PA : ASTM, 2001.
Trouver le texte intégralT, Riga Alan, Neag C. Michael et ASTM Committee E-37 on Thermal Measurements., dir. Materials characterization by thermomechanical analysis. Philadelphia, PA : ASTM, 1991.
Trouver le texte intégralRiga, AT, et L. Judovits, dir. Materials Characterization by Dynamic and Modulated Thermal Analytical Techniques. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959 : ASTM International, 2001. http://dx.doi.org/10.1520/stp1402-eb.
Texte intégralChapitres de livres sur le sujet "Thermal and Thermokinetic Characterization"
Moura Neto, Francisco Duarte, et Antônio José da Silva Neto. « Thermal Characterization ». Dans An Introduction to Inverse Problems with Applications, 129–39. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-32557-1_7.
Texte intégralAuroux, A. « Thermal Methods : Calorimetry, Differential Thermal Analysis, and Thermogravimetry ». Dans Catalyst Characterization, 611–50. Boston, MA : Springer US, 1994. http://dx.doi.org/10.1007/978-1-4757-9589-9_22.
Texte intégralNaranjo, Alberto, María del Pilar Noriega E., Tim A. Osswald, Alejandro Roldán-Alzate et Juan Diego Sierra. « Thermal Properties ». Dans Plastics Testing and Characterization, 75–126. München : Carl Hanser Verlag GmbH & ; Co. KG, 2008. http://dx.doi.org/10.3139/9783446418530.004.
Texte intégralYang, Rui. « Thermal Analysis ». Dans Analytical Methods for Polymer Characterization, 203–28. Boca Raton : CRC Press, 2018. : CRC Press, 2018. http://dx.doi.org/10.1201/9781351213158-6.
Texte intégralPriyadarshini, Rajashri. « Thermal Characterization of Composites ». Dans Composite Materials, 149–54. First edition. | Boca Raton, FL : CRC Press, 2021. : CRC Press, 2020. http://dx.doi.org/10.1201/9781003080633-7.
Texte intégralBucur, Voichita. « Thermal Imaging ». Dans Nondestructive Characterization and Imaging of Wood, 75–123. Berlin, Heidelberg : Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-662-08986-6_3.
Texte intégralVavilov, Vladimir, et Douglas Burleigh. « Defect Characterization ». Dans Infrared Thermography and Thermal Nondestructive Testing, 181–210. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-48002-8_5.
Texte intégralSun, J. G. « Thermal Imaging Characterization of Thermal Barrier Coatings ». Dans Advanced Ceramic Coatings and Interfaces II, 53–60. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2009. http://dx.doi.org/10.1002/9780470339510.ch6.
Texte intégralBertolotti, M., R. Li Voti, G. Liakhou, C. Sibilia, A. Montenero et G. Gnappi. « Thermal Characterization of Low Thermal Diffusivity Glasses ». Dans Photoacoustic and Photothermal Phenomena III, 217–20. Berlin, Heidelberg : Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-540-47269-8_55.
Texte intégralHassan, Rubia, et Kantesh Balani. « Powder Characterization and Synthesis ». Dans Fundamentals of Thermal Spraying, 131–63. Boca Raton : CRC Press, 2022. http://dx.doi.org/10.1201/9781003321965-6.
Texte intégralActes de conférences sur le sujet "Thermal and Thermokinetic Characterization"
Carre, P., et D. Delaunay. « Simultaneous Measurement of the Thermal Properties of Phase-Change Material and Complex Liquids Using a Nonlinear Thermokinetic Model ». Dans Advanced Course in Measurement Techniques in Heat and MassTransfer. Connecticut : Begellhouse, 1985. http://dx.doi.org/10.1615/ichmt.1985.advcoursemeastechheatmasstransf.210.
Texte intégralJonsmann, Jacques, et Siebe Bouwstra. « Thermal microactuator characterization ». Dans Design, Test, and Microfabrication of MEMS/MOEMS, sous la direction de Bernard Courtois, Selden B. Crary, Wolfgang Ehrfeld, Hiroyuki Fujita, Jean Michel Karam et Karen W. Markus. SPIE, 1999. http://dx.doi.org/10.1117/12.341175.
Texte intégralHoffmann, F. M., et R. A. dePaola. « High Resolution Electron Energy Loss Spectroscopy of Molecular Bond Weakening on Potassium Promoted Ru(001) ». Dans Microphysics of Surfaces, Beams, and Adsorbates. Washington, D.C. : Optica Publishing Group, 1985. http://dx.doi.org/10.1364/msba.1985.mc4.
Texte intégralFullem, T. Z., D. F. Rae, A. Sharma, J. A. Wolcott et E. J. Cotts. « Thermal characterization of thermal interface material bondlines ». Dans 2008 11th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (I-THERM). IEEE, 2008. http://dx.doi.org/10.1109/itherm.2008.4544268.
Texte intégralOlson, Brandon, et Harikishin Bakhtiani. « Thermal Characterization of Emisshield ». Dans 45th AIAA Aerospace Sciences Meeting and Exhibit. Reston, Virigina : American Institute of Aeronautics and Astronautics, 2007. http://dx.doi.org/10.2514/6.2007-417.
Texte intégralSarkany, Zoltan, Gabor Farkas et Marta Rencz. « Thermal characterization of capacitors ». Dans 2016 International Conference on Electronics Packaging (ICEP). IEEE, 2016. http://dx.doi.org/10.1109/icep.2016.7486811.
Texte intégralMeyendorf, N. « Acousto-Thermal Microstructure Characterization ». Dans REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION:Volume 22. AIP, 2003. http://dx.doi.org/10.1063/1.1570180.
Texte intégralAlysson, Silvestre, et Cícero da Rocha Souto. « Development and characterization of an experimental thermal cycling platform for thermal characterization ». Dans XI Congresso Nacional de Engenharia Mecânica - CONEM 2022. ABCM, 2022. http://dx.doi.org/10.26678/abcm.conem2022.con22-0259.
Texte intégralZhang, Shu, Yizhang Yang, Katayun Barmak, Yoed Rabin et Mehdi Asheghi. « MEMS Based High Sensitivity Calorimetry ». Dans ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-62332.
Texte intégralSingh, Y., N. Bajaj et G. Subbarayan. « Simultaneous thermal/flow characterization of thermal interface materials ». Dans 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). IEEE, 2016. http://dx.doi.org/10.1109/itherm.2016.7517707.
Texte intégralRapports d'organisations sur le sujet "Thermal and Thermokinetic Characterization"
Bennett, G., M. Thompson, T. Larkin et J. Hedstrom. Rf transistor thermal/electrical characterization. Office of Scientific and Technical Information (OSTI), septembre 1989. http://dx.doi.org/10.2172/5413222.
Texte intégralZemelka, Cole, Bartlomiej Benedikt et Philip Schembri. SX358 Foam Characterization : Thermal Conductivity. Office of Scientific and Technical Information (OSTI), novembre 2023. http://dx.doi.org/10.2172/2217473.
Texte intégralBoswell, Robert. Thermal Characterization of Two Epoxy Systems. Fort Belvoir, VA : Defense Technical Information Center, août 1999. http://dx.doi.org/10.21236/ada368621.
Texte intégralToni Y. Gutknecht et Guy L. Fredrickson. Thermal Characterization of Molten Salt Systems. Office of Scientific and Technical Information (OSTI), septembre 2011. http://dx.doi.org/10.2172/1035899.
Texte intégralWillis, Elisha Cade. Thermal characterization of commercial HDPE and UHMWPE. Office of Scientific and Technical Information (OSTI), septembre 2018. http://dx.doi.org/10.2172/1469514.
Texte intégralFeldman, M. R. Furnace characterization for horizontal shipping container thermal testing. Office of Scientific and Technical Information (OSTI), mai 1994. http://dx.doi.org/10.2172/10156477.
Texte intégralHemrick, James Gordon, Edgar Lara-Curzio et James King. Characterization of Min-K TE-1400 Thermal Insulation. Office of Scientific and Technical Information (OSTI), juillet 2008. http://dx.doi.org/10.2172/935368.
Texte intégralKlett, J. W. Characterization of ORNL's High Thermal Conductivity Graphite Foam. Office of Scientific and Technical Information (OSTI), janvier 2001. http://dx.doi.org/10.2172/777659.
Texte intégralGomez-Vasquez, Sylvia, Alexander L. Brown, Joshua A. Hubbard, Ciro J. Ramirez et Amanda B. Dodd. Carbon fiber composite characterization in adverse thermal environments. Office of Scientific and Technical Information (OSTI), mai 2011. http://dx.doi.org/10.2172/1029768.
Texte intégralHowe, David J., et Brian Morgan. Thermal Characterization of Thin Films for MEMS Applications. Fort Belvoir, VA : Defense Technical Information Center, février 2008. http://dx.doi.org/10.21236/ada478544.
Texte intégral