Littérature scientifique sur le sujet « Test des défauts de fabrication »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Test des défauts de fabrication ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Test des défauts de fabrication"
Aouchiche, Nedjma. « Défauts liés aux systèmes photovoltaïques autonomes et techniques de diagnostic - Etat de l’art ». Journal of Renewable Energies 21, no 2 (30 juin 2018) : 247–65. http://dx.doi.org/10.54966/jreen.v21i2.686.
Texte intégralMillon, Célia, Arnaud Vanhoye et Anne-Françoise Obaton. « Ultrasons laser pour la détection de défauts sur pièces de fabrication additive métallique ». Photoniques, no 94 (novembre 2018) : 34–37. http://dx.doi.org/10.1051/photon/20189434.
Texte intégralChoukroune, Chloé. « Guide clinique des défauts primaires d’éruption ». Revue d'Orthopédie Dento-Faciale 57, no 1 (mars 2023) : 49–54. http://dx.doi.org/10.1051/odf/2023006.
Texte intégralDerbal, Wassila, Abdellatif Zerizer, Jean Gérard et Daniel Guibal. « CARACTÉRISATION D’ABOUTAGES À ENTURES MULTIPLES POUR TROIS ESSENCES D’ALGÉRIE ». BOIS & ; FORETS DES TROPIQUES 325, no 325 (17 juillet 2015) : 59. http://dx.doi.org/10.19182/bft2015.325.a31273.
Texte intégralBaumgartner, Gary. « Une nouvelle méthode d'analyse factorielle pour la typologie des consommateurs ». Recherche et Applications en Marketing (French Edition) 4, no 3 (septembre 1989) : 3–23. http://dx.doi.org/10.1177/076737018900400302.
Texte intégralSeeleuthner, Ph, J. Bai et Ph Bompard. « Influence des défauts de fabrication sur les mécanismes d’endommagement dans un tube composite fibre de verre et résine époxyde. » Revue de Métallurgie 91, no 9 (septembre 1994) : 1344. http://dx.doi.org/10.1051/metal/199491091344.
Texte intégralAngeon, Valérie, Brice Magdalou, Fred Célimène et Kinvi Logossah. « Défauts de coordination au sein de l'élevage de bovidés à la Martinique : un test expérimental de terrain ». Revue d'Économie Régionale & ; Urbaine février, no 1 (2013) : 37. http://dx.doi.org/10.3917/reru.131.0037.
Texte intégralTruax, Bruce E. « Interferometers eliminate test plates during fabrication ». Applied Optics 27, no 11 (1 juin 1988) : 2090. http://dx.doi.org/10.1364/ao.27.002090.
Texte intégralHangouët, Jean-François, Michel Pausader et Jean-Philippe Cantou. « L'orthomosaïque à échelle départementale : les performances de l'imagerie Pléiades comparées au produit BD ORTHO® ». Revue Française de Photogrammétrie et de Télédétection, no 208 (5 septembre 2014) : 27–32. http://dx.doi.org/10.52638/rfpt.2014.127.
Texte intégralLi, Hu, Yubo Fan et Zhou Li. « Fabrication and performance test of biodegradable supercapacitor ». MRS Advances 4, no 37 (2019) : 2063–70. http://dx.doi.org/10.1557/adv.2019.253.
Texte intégralThèses sur le sujet "Test des défauts de fabrication"
Welter, Loïc. « Contribution à l'amélioration de l'observabilité et de la reproductibilité des défauts dans les dispositifs semi-conducteurs ». Thesis, Aix-Marseille, 2014. http://www.theses.fr/2014AIXM4776.
Texte intégralRecurrent defects appearing in specific contexts have a significant impact on nanoscale technology nodes manufacturing process yield. Therefore, a new in-situ process monitoring method is developed to improve the overall performance of the production tool. It is complementary to classical failure analysis techniques, especially when a yield crisis occurs. The idea is to transform a production circuit into a test vehicle by reusing its components. The circuit loses its original functionality in favor of process monitoring functions, carried out only with standard cells widely available in circuits. This transformation, called "topological exchange" involves modifying some levels of metallization and requires the creation of a particular design flow, based on Engineering Change Order (ECO) techniques. As several functions must be able to cohabit on the same vehicle, a multiplexing system is evaluated. Feasibility is shown through a test circuit designed analogously to a production circuit. It is transformed for the example into an integrated dielectric thickness control system
Bichebois, Pascal. « Méthodes pour améliorer les rendements grace aux techniques de controle des défauts sur plaquettes en cours de fabrication ». Grenoble INPG, 1998. http://www.theses.fr/1998INPG0028.
Texte intégralNasreddine, Bassam. « Conception d'une mémoire reconfigurable intégrée sur tranche ». Phd thesis, Grenoble INPG, 1988. http://tel.archives-ouvertes.fr/tel-00327331.
Texte intégral-à étudier la faisabilité de cette mémoire
-à définir l'architecture d'une telle mémoire en tenant compte du rendement
-à définir une stratégie de test pour l'ensemble du circuit
-à étudier les dispositifs de connexion/déconnexion qui permettront de réaliser physiquement la mémoire finale -à développer des algorithmes de configuration qui détermineront les groupes de cellules en paquets de 256kbits.
Ce travail a été réalisé dans le cadre du projet Esprit-824. Un premier essai de fabrication a permis de caractériser les dispositifs de connexion. La mémoire de 4.5 mbits a été envoyée en fabrication fin 1987
Alachkar, Bassem. « Diagnostic vibro-acoustique des défauts de fabrication des machines électriques ». Paris 11, 1995. http://www.theses.fr/1995PA112190.
Texte intégralAyadi, Badreddine. « Simulation et quantification tridimensionnelledes défauts générés par un processus de fabrication ». Phd thesis, École normale supérieure de Cachan - ENS Cachan, 2009. http://tel.archives-ouvertes.fr/tel-00466985.
Texte intégralAndreau, Olivier. « Nocivité en fatigue et contrôle de défauts produits par fabrication additive ». Thesis, Paris, ENSAM, 2019. http://www.theses.fr/2019ENAM0037.
Texte intégralThe Selective Laser Melting Process (SLM) consists in manufacturing metallic parts by melting successive powders layers. This new additive manufacturing method allows building new complex geometries that can help lighten structures, such as lattice parts. However, the mechanical properties of additive manufacturing parts are still an industrial concern, especially for high cycle fatigue behavior. Such parts can indeed comprise surface and internal pores that can be deleterious to mechanical properties. The goal of this thesis is to characterize the influence of porous defects on the high cycle fatigue fatigue performance of 316L SLM parts. Firstly, some key SLM parameters that can control the porosity and the microstructure of fabricated parts were quantified. A distinction between the pore types was proposed, and their characteristics were related to the volumetric energy density delivered by the laser. The microstructure was also investigated, with a focus on crystallographic orientation and grain size, depending on the melt pool overlap and morphology. Secondly, using X-ray tomography, a parametric research was conducted to generate and characterize optimized fatigue samples with a minimal amount of pores. Such samples were used as a reference for other fatigue samples containing various randomly distributed pore populations, with similar microstructures. The relative influence of different internal pore populations on the high cycle fatigue endurance was quantified, for similar surface pore population. Finally, deterministic pores with controlled morphology, position and various dimensions were generated after a detailed parametric optimization. A specific internal crack initiation threshold was evidenced for deterministic defects, which was supposed to be linked to the local gaseous environment during crack initiation and propagation
Ayadi, Badreddine. « Simulation et quantification tridimensionnelle des défauts générés par un processus de fabrication ». Cachan, Ecole normale supérieure, 2009. http://tel.archives-ouvertes.fr/tel-00466985/fr/.
Texte intégralThe manufacturing dimensioning intends to determine the intermediary geometrical and dimensional state of the part during its manufacturing process. This manufacturing dimension also permits to respect the functional requirements given by the design drawing on one hand, and the manufacturing constraints on the other (the machine precision, minimal machining extra thickness. . . ). The TMT method (Three-dimensional Manufacturing Tolerancing) is a three-dimensional approach of manufacturing dimensioning with the concept of small displacements torsor. This approach permits to treat the specification to definition drawing defined by the ISO norms. The purpose is to analyse the impact of the manufacturing deviations on each specification to be considered. This method uses a precise definition of the reference systems in each phase in correlation with the machine adjustment process. The nominal part model is directly fixtured on the datum system of the studied requirement so as to minimize the number of the unknowns. This approach puts into evidence the obtained calculation simplifications, which permits a simple writing of the dimensions chains resultant to verify each requirement
Patry, Jean-Luc. « Intégration sur tranche d'une architecture massivement parallèle tolérant les défauts de fin de fabrication ». Phd thesis, Grenoble INPG, 1992. http://tel.archives-ouvertes.fr/tel-00341630.
Texte intégralHouarche, Nicolas. « Modélisation de défauts paramétriques en vue de tests statiques et dynamiques ». Phd thesis, Université Montpellier II - Sciences et Techniques du Languedoc, 2009. http://tel.archives-ouvertes.fr/tel-00481534.
Texte intégralDerème, Tristan. « Test en tension des courts-circuits en technologie CMOS ». Montpellier 2, 1995. http://www.theses.fr/1995MON20032.
Texte intégralLivres sur le sujet "Test des défauts de fabrication"
Shepherd, Peter. Integrated Circuit Design, Fabrication and Test. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13656-8.
Texte intégral2003, Shukla Prashant, et Bhabha Atomic Research Centre, dir. Enstar detector : Fabrication and test measurement. Mumbai : Bhabha Atomic Research Centre, 2003.
Trouver le texte intégralC, O'Shea Donald, dir. Diffractive optics : Design, fabrication, and test. Bellingham, WA : SPIE Optical Engineering Press, 2004.
Trouver le texte intégralShepherd, Peter. Integrated circuit design, fabrication, and test. New York : McGraw-Hill, 1996.
Trouver le texte intégralRogo, C. Variable area radial turbine fabrication and test program. [Cleveland, Ohio : Army Aviation Research & Technology Activity, Propulsion Directorate, 1986.
Trouver le texte intégralRoc, Berenguer, et Meléndez Juan 1974-, dir. GPS & Galileo : Dual RF front-end receiver and design, fabrication, and test. New York : McGraw-Hill, 2009.
Trouver le texte intégralMarable, R. W. Design, fabrication, and test of the RL10 derivative II chamber/primary nozzle. [West Palm Beach, Fla : Pratt and Whitney Aircraft, 1989.
Trouver le texte intégralSharp, G. Richard. A new fabrication method for precision antenna reflectors for space flight and ground test. Cleveland, Ohio : Lewis Research Center, 1991.
Trouver le texte intégralStoney, Robert Brian. Design, fabrication and test of a vertical attitude takeoff and landing unmanned air vehicle. Monterey, Calif : Naval Postgraduate School, 1993.
Trouver le texte intégralUnited States. National Aeronautics and Space Administration., dir. Test plans, lightweight durable TPS tasks, 1,2,4,5, and 6. [Downey, Calif.] : Rockwell Aerospace, Space Systems Division, 1994.
Trouver le texte intégralChapitres de livres sur le sujet "Test des défauts de fabrication"
Marwedel, Peter. « Test ». Dans Embedded Systems, 381–91. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-60910-8_8.
Texte intégralLin, Jing, Yonggang Meng et Nanhai Song. « Fabrication and Flying Test of Silicon Sliders ». Dans Advanced Tribology, 579–81. Berlin, Heidelberg : Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-03653-8_186.
Texte intégralShepherd, Peter. « The IC Design Process ». Dans Integrated Circuit Design, Fabrication and Test, 1–20. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13656-8_1.
Texte intégralShepherd, Peter. « IC Families ». Dans Integrated Circuit Design, Fabrication and Test, 21–41. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13656-8_2.
Texte intégralShepherd, Peter. « Transistor-Level Design ». Dans Integrated Circuit Design, Fabrication and Test, 42–96. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13656-8_3.
Texte intégralShepherd, Peter. « IC Realization ». Dans Integrated Circuit Design, Fabrication and Test, 97–116. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13656-8_4.
Texte intégralShepherd, Peter. « CAD ». Dans Integrated Circuit Design, Fabrication and Test, 117–45. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13656-8_5.
Texte intégralShepherd, Peter. « Testing ». Dans Integrated Circuit Design, Fabrication and Test, 146–75. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13656-8_6.
Texte intégralShepherd, Peter. « Afterword ». Dans Integrated Circuit Design, Fabrication and Test, 176–81. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13656-8_7.
Texte intégralSim, Wonchul, Daeho Kim, Kihoon Kim, Keeyoung Kwon, Byungkyu Kim, Bumkyoo Choi, Sangsik Yang et Jongoh Park. « Fabrication, Test and Simulation of a Parylene Diaphragm ». Dans Transducers ’01 Eurosensors XV, 1354–57. Berlin, Heidelberg : Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/978-3-642-59497-7_319.
Texte intégralActes de conférences sur le sujet "Test des défauts de fabrication"
McCaffrey, John E. « "Sun Rejection Test" ». Dans Optical Fabrication and Testing. Washington, D.C. : Optica Publishing Group, 1990. http://dx.doi.org/10.1364/oft.1980.ffa3.
Texte intégralRuda, Mitchell. « The Foucault Test ». Dans Optical Fabrication and Testing. Washington, D.C. : Optica Publishing Group, 1990. http://dx.doi.org/10.1364/oft.1980.ffa4.
Texte intégralCiminelli, Caterina, Mario Nicola Armenise et Vittorio M. N. Passaro. « Reliability test procedures for tunable lasers ». Dans Photonics Fabrication Europe, sous la direction de Giancarlo C. Righini. SPIE, 2003. http://dx.doi.org/10.1117/12.472485.
Texte intégralKim, G. N. « Fabrication of photocathode test-stand ». Dans The fourteenth international spin physics symposium, SPIN2000. AIP, 2001. http://dx.doi.org/10.1063/1.1384239.
Texte intégralLin, J. A., Jeremy Hsu et S. G. Shiue. « Quantitative Three-beam Ronchi Test ». Dans Optical Fabrication and Testing. Washington, D.C. : Optica Publishing Group, 1987. http://dx.doi.org/10.1364/oft.1987.thbb8.
Texte intégralReily, Jack, Jeff Kegley, John Keidel, Richard Siler, Ernie Wright, David Jacobson, Scott Smith, Ron Eng et Phil Stahl. « Multi-use space optics test facility ». Dans Optical Fabrication and Testing. Washington, D.C. : OSA, 2000. http://dx.doi.org/10.1364/oft.2000.omd2.
Texte intégralAnderson, David S., et James H. Burge. « Infrared interferometric wire test of aspherics ». Dans Optical Fabrication and Testing. Washington, D.C. : Optica Publishing Group, 1994. http://dx.doi.org/10.1364/oft.1994.otha2a.
Texte intégralAnderson, David S., et James H. Burge. « IR Interferometric "Wire" Test of Aspherics ». Dans Optical Fabrication and Testing. Washington, D.C. : Optica Publishing Group, 1994. http://dx.doi.org/10.1364/oft.1994.otha2.
Texte intégralRosenbruch, K. J. « ISO Standards on Optical Test Methods ». Dans Optical Fabrication and Testing. Washington, D.C. : Optica Publishing Group, 1988. http://dx.doi.org/10.1364/oft.1988.fa2.
Texte intégralBurge, Jim, et Peter Koudelka. « Optical test alignment using computer generated holograms ». Dans Optical Fabrication and Testing. Washington, D.C. : OSA, 2002. http://dx.doi.org/10.1364/oft.2002.owd2.
Texte intégralRapports d'organisations sur le sujet "Test des défauts de fabrication"
Saito, T. T. Spacecraft fabrication and test MODIL. Final report. Office of Scientific and Technical Information (OSTI), mai 1994. http://dx.doi.org/10.2172/10173229.
Texte intégralDas-Gupta, D. K., et C. D. Roberts. Design and Fabrication of an Elastomer Test Machine. Fort Belvoir, VA : Defense Technical Information Center, mai 1988. http://dx.doi.org/10.21236/ada195755.
Texte intégralKuczun, C. G. Fabrication and Test of Modified Quadrupole Mass Spectrometer. Fort Belvoir, VA : Defense Technical Information Center, janvier 1985. http://dx.doi.org/10.21236/ada155186.
Texte intégralGrendahl, Scott, Daniel Snoha et Brijmohan Roopchand. Fabrication and Evaluation of Welded Ti-6Al-4V Test Sections. Fort Belvoir, VA : Defense Technical Information Center, juin 2001. http://dx.doi.org/10.21236/ada394632.
Texte intégralDaw, Joshua, Anthony Crawford, Richard Skifton, Lance Hone, Richard Jacob et Robert Montgomery. TREAT test capsule mockup fabrication and initial sensor integration planning. Office of Scientific and Technical Information (OSTI), avril 2019. http://dx.doi.org/10.2172/1668317.
Texte intégralKent, E., et C. Grandy. Gripper Test Assembly Status of Fabrication and Assembly Report – FY2023. Office of Scientific and Technical Information (OSTI), septembre 2023. http://dx.doi.org/10.2172/2204276.
Texte intégralSaito, T. T., G. P. Spellman, D. M. Sanders, L. V. Griffith et G. E. Cruz. Spacecraft Fabrication and Test MODIL. Semiannual report, March 1992--October 1992. Office of Scientific and Technical Information (OSTI), mai 1993. http://dx.doi.org/10.2172/10142240.
Texte intégralRein, J., M. Weathered, E. Kent, D. Kultgen et C. Grandy. Flow Sensor Test Article (F-STAr) - Design and Fabrication Status Report. Office of Scientific and Technical Information (OSTI), août 2022. http://dx.doi.org/10.2172/1893158.
Texte intégralWachs, G. W. Fabrication, inspection, and test plan for the Advanced Test Reactor (ATR) Mixed-Oxide (MOX) fuel irradiation project. Office of Scientific and Technical Information (OSTI), novembre 1997. http://dx.doi.org/10.2172/565642.
Texte intégralHoff, M. D. Scintillating tile fabrication for the 4 {times} 4 calorimeter test station module. Office of Scientific and Technical Information (OSTI), juin 1992. http://dx.doi.org/10.2172/10159981.
Texte intégral