Bibliographies thématiques / Techno-Economical assessment

Littérature scientifique sur le sujet « Techno-Economical assessment »

Auteur : Grafiati

Publié le 8 juin 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Articles de revues
Thèses
Chapitres de livres
Actes de conférences

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Techno-Economical assessment ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Techno-Economical assessment"

Tantawy, Elham M., Ebrahim A. Badran et Mansour H. Abdel-Rahman. « Techno-Economic Assessment of Voltage Sags Mitigation in Distribution System Connected to DGs ». International Transactions on Electrical Energy Systems 2022 (4 août 2022) : 1–15. http://dx.doi.org/10.1155/2022/8795100.

Texte intégral

Résumé :

The penetration of DG in electrical distribution systems has many benefits. The paper highlights the impact of DG penetration at different load centers and different operating conditions in a distribution feeder. The impact of DG penetration on feeder voltage profile that depends on the size and location of DG in the system is illustrated. Mitigating methods are used to reduce the effect of voltage disturbances. Economic assessment studies are used for assisting in the economic choice of mitigating methods. Economical aspects of distribution systems connected to DGs are considered through the analysis of the life cycle cost of these distribution generation sources. Maintenance strategies are illustrated and discussed to keep these sources always ready for operation regarding minimization of maintenance cost. Technical and economical assessments depend on the availability of historical data for disturbances cost including damages and cost of disturbance mitigation using different mitigation methods. These data are difficult to be available for different types of loads. Therefore, load indices, K1, K2, and K3, are proposed in this paper for the different loads as referring it to reference load has available data to overcome the challenge of data shortage. Also, a techno-economic assessment index F is proposed for the assessment of the impact of mitigating device improving cost and its feasibility. PSCAD/EMTDC simulation software package is used in this analysis. The results show that the proposed techno-economic assessment methodology facilitates the decision of choosing the mitigation method for power quality problems and to overcome the challenge of data shortage in the techno-economic assessment.

Styles APA, Harvard, Vancouver, ISO, etc.

Blanco, J., S. Malato, B. Milow, M. I. Maldonado, H. Fallmann, T. Krutzler et R. Bauer. « Techno-economical assessment of solar detoxification systems with compound parabolic collectors ». Le Journal de Physique IV 09, PR3 (mars 1999) : Pr3–259—Pr3–264. http://dx.doi.org/10.1051/jp4:1999339.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Maghouli, Pouria, Alireza Soroudi et Andrew Keane. « Robust computational framework for mid-term techno-economical assessment of energy storage ». IET Generation, Transmission & ; Distribution 10, n^o 3 (18 février 2016) : 822–31. http://dx.doi.org/10.1049/iet-gtd.2015.0453.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Campisi, Giovanni, Alessandro Cosenza, Francesco Giacalone, Serena Randazzo, Alessandro Tamburini et Giorgio Micale. « Desalination of oilfield produced waters via reverse electrodialysis : A techno-economical assessment ». Desalination 548 (février 2023) : 116289. http://dx.doi.org/10.1016/j.desal.2022.116289.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Bastos, Pedro D. A., Maria António Santos, Pedro Jorge Carvalho, Svetlozar Velizarov et João G. Crespo. « Pilot scale reverse osmosis refinery wastewater treatment – a techno-economical and sustainability assessment ». Environmental Science : Water Research & ; Technology 7, n^o 3 (2021) : 549–61. http://dx.doi.org/10.1039/d0ew00936a.

Texte intégral

Résumé :

Technologies for wastewater reclamation and water reuse within oil refineries have been gaining particular attention over the past decade due to legislative pressures associated with the efficient use of water resources and wastewater discharge.

Styles APA, Harvard, Vancouver, ISO, etc.

Savla, Nishit, Suman, Soumya Pandit, Jay Prakash Verma, Abhishek Kumar Awasthi, Siva Sankar Sana et Ram Prasad. « Techno-economical evaluation and life cycle assessment of microbial electrochemical systems : A review ». Current Research in Green and Sustainable Chemistry 4 (2021) : 100111. http://dx.doi.org/10.1016/j.crgsc.2021.100111.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Kazem, Hussein A., et Tamer Khatib. « Techno-economical assessment of grid connected photovoltaic power systems productivity in Sohar, Oman ». Sustainable Energy Technologies and Assessments 3 (septembre 2013) : 61–65. http://dx.doi.org/10.1016/j.seta.2013.06.002.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Al-Waeli, Ali H. A., K. Sopian, Hussein A. Kazem et Miqdam T. Chaichan. « Nanofluid based grid connected PV/T systems in Malaysia : A techno-economical assessment ». Sustainable Energy Technologies and Assessments 28 (août 2018) : 81–95. http://dx.doi.org/10.1016/j.seta.2018.06.017.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Ferreira, Jéssica, Matheus Quintão Braga, Rafael Carvalho Nogueira da Gama, Iara Barbosa Magalhães, Bianca Barros Marangon, Jackeline de Siqueira Castro, Juliana Ferreira Lorentz et al. « Carotenoids from wastewater-grown microalgae biomass : Life cycle assessment and techno-economical analysis ». Journal of Cleaner Production 434 (janvier 2024) : 140526. http://dx.doi.org/10.1016/j.jclepro.2023.140526.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Muresan, Mirela, Calin-Cristian Cormos et Paul-Serban Agachi. « Techno-economical assessment of coal and biomass gasification-based hydrogen production supply chain system ». Chemical Engineering Research and Design 91, n^o 8 (août 2013) : 1527–41. http://dx.doi.org/10.1016/j.cherd.2013.02.018.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Techno-Economical assessment"

Zanobetti, Francesco. « Development of a multi-objective optimisation approach for the assessment of techno-economical and environmental performances of pipeline-based Carbon Capture and Storage (CCS) systems ». Master's thesis, Alma Mater Studiorum - Università di Bologna, 2021.

Trouver le texte intégral

Résumé :

It is widely recognized that Carbon Capture and Storage (CCS) may be playing a key role in decarbonising industrial and power generation processes and meeting net zero emission targets by 2050. However, the successful large-scale development of CCS is still hindered by a wide lack of reliable techno-economic and environmental assessment methodologies. In the present work, a CFD code developed by UCL Chemical Engineering, named PipeTech, was first used to simulate CO2 pipeline transport performances with respect to variations of main design and operational parameters. Based on these results, a multi-objective optimisation methodology for CCS pipelines is proposed to minimise economic and environmental footprints while reliably simulating fluid flow behaviour. Then, the Decision Maker (DM) is supposed to select one or more trade-offs that best suit his preferences. Three potentially most effective solutions were determined by applying the mathematical Level Diagrams technique. Uncertainty affecting CO2 transport cost modelling is assessed by employing a Monte Carlo simulation approach, which also provides the DM with a probabilistic tool to compare the different alternatives. Lastly, a quantitative methodology is applied to convert multi-criteria optimisation results in impact indicators weighting economic and environmental issues. Results were then compared with those given by the single minimisation of two additional indices. These are presented as a “CO2 avoided transport cost”, which considers an apparent transported flow rate decreased by emitted GHG expressed as CO2 equivalents, and as a “market-based transport cost”, which applies a carbon pricing to the greenhouse gas emissions according to carbon markets. Overall, this approach provided a route to flexibly weigh environmental and economic concerns according to DM preferences, whereas the two aggregated indices give a lower visibility to the environmental footprint of the system.

Styles APA, Harvard, Vancouver, ISO, etc.

Demol, Rémi. « Production d'hydrogène issu de gazéification de biomasse : modélisation, analyse technico-économique et environnementale de solutions innovantes ». Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0322.

Texte intégral

Résumé :

La minimisation des impacts causés par le changement climatique impose de substituer des énergies fossiles par des énergies faiblement émettrices de CO₂. L’hydrogène est vu comme un vecteur énergétique permettant de décarboner une partie de l’industrie et des usages de transport et de mobilité. Pourtant, l’hydrogène est produit aujourd’hui quasi-exclusivement à partir d’énergies fossiles pour des usages industriels.Ces travaux s’intéressent à la production d’hydrogène à partir d’une ressource renouvelable, les plaquettes de bois produits secondaires de l’industrie forestière. Compte tenu de la nature du combustible utilisé, des petites unités de valorisation sont envisagées (zone d’approvisionnement limitée, transport de la ressource à courte distance). Les procédés de pyrogazéification permettent la transformation de cette ressource en un gaz de synthèse (CO, H₂, CH₄, CO₂) sous l’effet d’un apport de chaleur (pyrolyse) ou d’un agent oxydant (gazéification) constitué d’oxygène et de vapeur d’eau.Pour juger de la pertinence de ces procédés de pyrogazéification, ils sont étudiés et modélisés avec Aspen Plus. Une attention particulière est apportée à la chaîne de traitement du gaz de synthèse produit. Ce syngaz contient des goudrons qu’il convient de réduire pour l’utilisation ultime du gaz. Dans ce but, une unité d’oxydation partielle est envisagée et modélisée à partir de mécanismes de cinétique radicalaire. Le gaz épuré peut alors être enrichi en H₂ avec des réacteurs de Reformage Catalytique et de Water Gas Shift. La séparation de l’hydrogène produit est une autre étape cruciale et les technologies classiques ne sont pas toujours adaptées au gaz produit. Quand une seule technologie n’est pas à même de réaliser la séparation, un procédé hybride combinant des technologies membranaire et d’adsorption est adopté. La chaleur produite par le procédé est valorisée dans un réseau de chaleur. Afin de juger de la pertinence de ces options, tant d’un point de vue financier que du développement durable, une analyse technico-économique est réalisée ainsi qu’une analyse de cycle de vie. Ces procédés offrent clairement une alternative vertueuse pour la production de différents vecteurs : hydrogène, chaleur, voire biochar. Mais dans les conditions actuelles de marché, ces filières ne sont pas en mesure d’atteindre l’équilibre financier sans un soutien public
Minimizing the impacts caused by climate change imply the replacement of fossil fuels low greenhouse gas emitting energies. The hydrogen energy vector is forecasted to contribute to decarbonizing a part of industry and the uses of transport and mobility. Yet hydrogen is produced nowadays almost exclusively from fossil fuels and is dedicated to industrial applications.This work focuses on the production of hydrogen from a renewable resource, wood chips a by-product of the forest industry. Due to the nature of the fuel considered, small plant units are chosen (a limited supply area, short-distance transport of the resource). Pyrogasification processes transform this combustible into a synthesis gas (CO, H₂, CH₄, CO₂) under the effect of heat input (pyrolysis) or an oxidizing agent (gasification) consisting of oxygen and water vapor.To evaluate the relevance of these pyrogasification processes, they are studied and modeled with Aspen Plus®. Particular attention is put on the synthesis gas cleaning process. This syngas contains tars which should be reduced for the ultimate use of the gas. For this purpose, a partial oxidation unit is envisaged and modeled from a detailed radical kinetic mechanism. The purified gas can then be enriched in H₂ with Catalytic Reforming and Water Gas Shift reactors. The separation of the hydrogen produced is another crucial step and conventional technologies are not always suited to the gas produced. When a single technology cannot achieve the separation, a hybrid process combining membrane and adsorption technologies is adopted. The heat produced by the process is recovered in a heating network.In order to evaluate the relevance of these options, both from a financial and sustainable development point of view, a techno-economic analysis is carried out as well as a life cycle analysis. These processes clearly offer a virtuous alternative for the production of different vectors: hydrogen, heat and even bio-char. But under current market conditions, these industries are unable to reach financial equilibrium without public support

Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Techno-Economical assessment"

Joshi, Saurabh, et Somen Jana. « Techno-economical assessment of defluoridation of water ». Dans Green Technologies for the Defluoridation of Water, 175–96. Elsevier, 2021. http://dx.doi.org/10.1016/b978-0-323-85768-0.00001-4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Brigljević, Boris, Peyman Fasahati et J. Jay Liu. « Integrated Bio-refinery Utilizing Brown Macroalgae : Process Design, Simulation and Techno-economical Assessment ». Dans 13th International Symposium on Process Systems Engineering (PSE 2018), 337–42. Elsevier, 2018. http://dx.doi.org/10.1016/b978-0-444-64241-7.50051-3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Techno-Economical assessment"

Ya'acob, Mohammad Effendy, Noor Fadzlinda Othman, Mark Buda, Elina Jani et Ahmad Suhaizi Mat Su. « Field assessment on Agrivoltaic Misai Kucing Techno-economical approach in Solar Farming ». Dans 2021 International Conference on Electrical, Computer and Energy Technologies (ICECET). IEEE, 2021. http://dx.doi.org/10.1109/icecet52533.2021.9698511.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Chen, Yiming, Santiago Grijalva, Lukas Graber et Younes Seyedi. « Techno-Economical Assessment of AC and DC Power Distribution Architectures for Data Centers ». Dans 2022 North American Power Symposium (NAPS). IEEE, 2022. http://dx.doi.org/10.1109/naps56150.2022.10012148.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Chen, Yiming, Santiago Grijalva et Lukas Graber. « Techno-Economical Assessment of MVAC and MVDC Collector Systems for Offshore Wind Farms ». Dans 2023 IEEE Texas Power and Energy Conference (TPEC). IEEE, 2023. http://dx.doi.org/10.1109/tpec56611.2023.10078627.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Köppen, Arne, Fredrik Magnusson, Stéphane Velut, Rui Gao, Koji Moriyama et Robert Uyeki. « Techno-economic assessment of an industrial project towards carbon neutrality ». Dans Asian Modelica Conference 2022, Tokyo, Japan, November 24-25, 2022. Linköping University Electronic Press, 2022. http://dx.doi.org/10.3384/ecp19321.

Texte intégral

Résumé :

This paper describes the application of the system simulation platform Modelon Impact for techno-economical assessment of energy projects towards carbon neutrality. The control co-design approach applied in the work allows for rapid assessment of various technology options without the need for deriving complex control laws for the considered assets. The approach is here applied on an industrial use case where the goal is to identify the technology options that minimize the total cost of ownership while achieving carbon neutrality.

Styles APA, Harvard, Vancouver, ISO, etc.

Texte intégral

Résumé :

Styles APA, Harvard, Vancouver, ISO, etc.

Schellander, Martin, Tamer Khatib, Wilfried Elmenreich et Dominik Egarter. « Techno-economical assessment of grid-connected photovoltaic power systems productivity in summer season in Klagenfurt, Austria ». Dans 2014 IEEE International Conference on Power and Energy (PECon). IEEE, 2014. http://dx.doi.org/10.1109/pecon.2014.7062463.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Weiland, Finn, Niklas Kracht, Bharat Chhugani et Peter Pärisch. « Techno-Economical Assessment of a Solar Regenerated Borehole Heat Exchanger Field with PVT Collectors for District Heating ». Dans EuroSun 2022 - ISES and IEA SHC International Conference on Solar Energy for Buildings and Industry. Freiburg, Germany : International Solar Energy Society, 2022. http://dx.doi.org/10.18086/eurosun.2022.04.15.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nache Romo, Carlos, Margarita M. Rodriguez-Garcia, Manuel Pérez García et Jose Luis Torres-Moreno. « Techno-Economical Assessment of Molten Salts Thermal Energy Storage Options in a Central Receiver Solar Plant in Southern Spain ». Dans ISES Solar World Congress 2019/IEA SHC International Conference on Solar Heating and Cooling for Buildings and Industry 2019. Freiburg, Germany : International Solar Energy Society, 2019. http://dx.doi.org/10.18086/swc.2019.21.05.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Khot, Mahesh Balwant. « Life cycle assessment (LCA) of microbial oil-derived fuels and other non-fuel products ». Dans 2022 AOCS Annual Meeting & Expo. American Oil Chemists' Society (AOCS), 2022. http://dx.doi.org/10.21748/imol9786.

Texte intégral

Résumé :

Much literature is available on fungal lipids and their capability as a renewable oil platform for alternate fuels, chemicals, and food products. Microbial oils will not displace all edible oils soon, given techno-economical hurdles in commercialization. However, continued research & development can flatten the curve of deforestation and land-use impacts associated with cultivating these crops. To better understand how oleaginous yeasts and fungi could alleviate the challenges related to the energy-environment-food nexus, it becomes critical to investigate their potential environmental impacts quantitively compared to other feedstocks. Life cycle analysis or assessment (LCA) is a standard tool used for this purpose. LCA studies are not being conducted on a broader scale for fungus-derived oils than their phototrophic algal counterparts. The different stages in the life cycle of fungal lipid production that can be analyzed for environmental implications include cultivation and fermentation, oil extraction; further downstream processing; and end-use. The LCA method for fungal lipid-derived biofuel production systems should cover the main sustainability concerns of biofuel production systems: energy efficiency, climate change, and land occupation. With the scope of microbial oil applications expanding beyond non-fuel encompassing food, supplements, and medicines, their subsequent environmental implications need to be investigated. Further work is required in this area. There are significant knowledge gaps in life cycle inventory and impact assessment information for non-fuel applications.

Styles APA, Harvard, Vancouver, ISO, etc.

Colim, Ana, André Cardoso, Estela Bicho, Luís Louro, Carla Alves, Pedro Ribeiro, Débora Pereira et al. « On the development of an ergonomic approach for the design of an industrial robotic coworker ». Dans 10th International Conference on Human Interaction and Emerging Technologies (IHIET 2023). AHFE International, 2023. http://dx.doi.org/10.54941/ahfe1004004.

Texte intégral

Résumé :

As industries push for continuous technological innovation to boost their competitiveness, the need to balance techno-economical goals with emerging societal needs is now more pressing than ever. Inspired by the novel paradigm of Industry 5.0, we aim to place human physical and cognitive needs at the center of the production process, introducing proactive and human-aware robots capable of collaboration as co-workers. Although Human-Robot Collaboration (HRC) has successfully permeated different industrial sectors, they still have a relatively limited role as agents that share the human workspace mostly executing pre-programmed actions. Based on this gap a research project is ongoing, including researchers in Ergonomics and Robotics. The current article presents the first stage related to the design of a workstation prototype that emulates industrial tasks and will allow us to explore the different HRC scenarios. The selection of the assembly task was supported by ergonomic assessment (Rapid Upper Limb Assessment), and questionnaires focused on the workers' psychophysical and cognitive overload perceived. Then, the CoppeliaSim simulation software was used to allow us to accurately reproduce both the visual and the physical aspects of the prototype, including the model of a humanoid abstract avatar. In addition, a set of ergonomic and safety requirements were defined to support the human-centered design of the prototype. The results of this research phase will be important for the next steps of our project and for other researchers/industrial practitioners focused on the human-centered design of HRC scenarios.

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!