Bibliographies thématiques / Technical plant

Littérature scientifique sur le sujet « Technical plant »

Auteur : Grafiati
Publié le 14 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Technical plant ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Technical plant"

1

HIRAI, Shuichi, Toshiyuki MITA, Maki YAMASHITA, Atsushi IIDA et Hiroshi NISHIGAMI. « Chemical Plant(Technical Topics) ». JOURNAL OF THE JAPAN WELDING SOCIETY 83, no 8 (2014) : 623–28. http://dx.doi.org/10.2207/jjws.83.623.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Wang, Yujie, et Christian Frankenberg. « Technical note : Common ambiguities in plant hydraulics ». Biogeosciences 19, no 19 (5 octobre 2022) : 4705–14. http://dx.doi.org/10.5194/bg-19-4705-2022.

Texte intégral
Résumé :
Abstract. Plant hydraulics gains increasing interest in plant ecophysiology and vegetation modeling. However, the hydraulic properties and profiles are often improperly represented, thus leading to biased results and simulations, e.g., the neglection of gravitational pressure drop results in overestimated water flux. We highlight the commonly seen ambiguities and/or misunderstandings in plant hydraulics, including (1) the distinction between water potential and pressure, (2) differences among hydraulic conductance and conductivity, (3) xylem vulnerability curve formulations, (4) model complexity, (5) stomatal-model representations, (6) bias from analytic estimations, (7) whole-plant vulnerability, and (8) neglected temperature dependencies. We recommend careful thinking before using or modifying existing definitions, methods, and models.
Styles APA, Harvard, Vancouver, ISO, etc.
3

J. David Bankston, Thomas B. Lawson et Robert P. Romaire. « Technical Notes : Crawfish Processing Plant Wastewater Characterization ». Transactions of the ASAE 31, no 2 (1991) : 0582–84. http://dx.doi.org/10.13031/2013.30751.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Cuda, J. « Optimum plant capacity - technical and economic considerations ». Radiation Physics and Chemistry (1977) 25, no 1-3 (janvier 1985) : 411–23. http://dx.doi.org/10.1016/0146-5724(85)90289-4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Vergura, Silvano, et Valdir Lameira. « Technical-Financial Comparison Between a PV Plant and a CSP Plant ». Sistemas & ; Gestão 6, no 2 (2011) : 210–20. http://dx.doi.org/10.7177/sg.2011.v6.n2.a9.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

O'Hara, John M., James Higgins et William Stubler. « Computerization of Nuclear Power Plant Emergency Operating Procedures ». Proceedings of the Human Factors and Ergonomics Society Annual Meeting 44, no 22 (juillet 2000) : 819–22. http://dx.doi.org/10.1177/154193120004402284.

Texte intégral
Résumé :
Emergency operating procedures (EOPs) in nuclear plants guide operators in handling significant process disturbances. Historically these procedures have been paper-based. More recently, computer-based procedure (CBP) systems have been developed to improve the usability of EOPs. The objective of this study was to establish human factors review guidance for CBP systems based on a technically valid methodology. First, a characterization of CBPs was developed for describing their key design features, including both procedure representation and functionality. Then, the research on CBPs and related areas was reviewed. This information provided the technical basis on which the guidelines were developed. For some aspects of CBPs the technical basis was insufficient to develop guidance; these aspects were identified as issues to be addressed in future research.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Forostyan, Yu N., O. V. Shirikov et E. I. Forostyan. « Ammonolysis of technical lignins ». Chemistry of Natural Compounds 23, no 2 (1987) : 231–34. http://dx.doi.org/10.1007/bf00598766.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Bamba, Takeshi, et Eiichiro Fukusaki. « Technical problems and practical operations in plant metabolomics ». Journal of Pesticide Science 31, no 3 (2006) : 300–304. http://dx.doi.org/10.1584/jpestics.31.300.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Cabello, Tomás, et Rafael Cañero. « Technical efficiency of plant protection in Spanish greenhouses ». Crop Protection 13, no 2 (mars 1994) : 153–59. http://dx.doi.org/10.1016/0261-2194(94)90167-8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Jan, Arif T., Mudsser Azam, Mohiuddin K. Warsi, Arif Ali et Qazi Mohd Rizwanul Haq. « Technical advancement in plant virus diagnosis – an appraisal ». Archives Of Phytopathology And Plant Protection 45, no 8 (mai 2012) : 909–21. http://dx.doi.org/10.1080/03235408.2011.599156.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Technical plant"

1

Petersen, Ron J. « A feasibility study for an Industrial Electronics Maintenance Certificate at Western Wisconsin Technical College ». Online version, 2001. http://www.uwstout.edu/lib/thesis/2001/2001petersenr.pdf.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Leary-Elderkin, Cathlene I. « Report on a Technical Communication Internship with a Newly Established Plant Nursery ». Miami University / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=miami1132781822.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Kariuki, Kibaara Samuel. « Technical and economic analysis of parabolic trough concentrating solar thermal power plant ». Master's thesis, University of Cape Town, 2012. http://hdl.handle.net/11427/11929.

Texte intégral
Résumé :
Includes abstract.
Includes bibliographical references.
This thesis reports on the technical and economic analysis of wet and dry cooling technologies of parabolic trough CSTP plant. This was done through modelling and simulation of a standalone and grid connected parabolic trough using the System Advisor Model (SAM).
Styles APA, Harvard, Vancouver, ISO, etc.
4

Langa, Phakama Perry Macmillan. « Assessment of the implementation of the National Certificate (Vocational) plant production modules ». Thesis, University of Fort Hare, 2016. http://hdl.handle.net/10353/2359.

Texte intégral
Résumé :
From 2010, the South African vocational skills education is offered by the Department of Higher Education and Training (DHET) through the Technical Vocational Education and Training (TVET) colleges. TVET colleges need to be transformed in order to empower young learners with the skills required by the various sectors of the economy. The purpose of this study was to assess the implementation of the National Certificate (Vocational) Plant Production module in Training and Vocational Education and Training (TVET) Colleges. The sample for this study is concurrent triangulation whereby complementary methods of data sources were brought together to offset each other‘s weaknesses. The sample for this study consisted of participants from three TVET colleges: one deep rural, one semi-rural/semi-urban and one urban in terms of geographical location. A total of 18 participants were interviewed: 2 subject advisors engaged by the colleges, 1 lecturer from college A, 3 lecturers from college B, 2 lecturers from college C, 4 graduates from college B, 3 graduates from college C and 3 employers .Research design for this study has features of both a survey and a case study. The mixed-method approach was applied using document analysis, questionnaires and interviews for data collection. The researcher found out that there is a disparity between the Plant Production guidelines and their implementation and assessment. Among the main reasons for failure to implement the guidelines properly are poor or inadequate infrastructure for doing practical work, high rate of student absenteeism within the investigated categories, and the high drop-out rate at Levels 2–4. To minimize the challenges in offering the Plant Production module, the study recommends that since some colleges cannot afford purchasing large sizes of land to properly implement the Plant Production guidelines, the government and the DHET should link the Primary Agriculture training to the land reform program where students can be trained under the land reform program.
Styles APA, Harvard, Vancouver, ISO, etc.
5

You, Chen Xialei. « Nutrient recovery from waste water treatment plant by sorption processes : technical and economic analysis ». Doctoral thesis, Universitat Politècnica de Catalunya, 2018. http://hdl.handle.net/10803/664193.

Texte intégral
Résumé :
In the last years has been performed a huge number of research related to nutrients (mainly N and P) recovery from waste water in order to promote their reuse and also to avoid eutrophication. Recovering nutrient from waste water can promote the circular economy, minimize the environmental footprint of waste water treatment and reduce anthropogenic alteration of nitrogen and phosphorus natural cycle. Among the different techniques studied, sorption is nowadays one of the most interesting alternatives as requires less energy than electrochemical or membrane technologies and sorbents can be regenerated for being reused. Thus, the overall sorption performance of different ion exchangers was characterized for nutrient recovery from waste water treatment plant effluents. Two commercial polymeric resins doped with Hydrated Ferrous Oxide (HFO) (Lewatit FO36 and Fiban-As) were assessed for ammonium and phosphate uptake from waste water streams. Equilibrium and kinetics studies have been performed through batch experiments and the dynamic studies were carried out by fixed-bed column. The experimental study covered from the simplest monocomponent synthetic water (ammonium, phosphate solutions) to the most complex real water from waste water treatment plant (WWTP) which contains ions, TSS and organic matter. Sorption experiments reported for both sorbents high selectivity towards phosphate ions as sorption capacity did not significantly decrease in presence of competing ions. Loaded sorbents were regenerated through alkaline and acid desorption in order to reuse resin and obtain a high concentrated phosphate solution, which could be used for high quality fertilizer production. Results in dynamic flow experiments reported up to 80% of loaded phosphate extraction, although during desorption process was observed sorption capacity decrease up to 30% after three sorption-desorption working cycles. Besides, salt modified synthetic zeolites were assessed for being used both as one charge (di-valent forms) and reusable (mono-valent forms) sorbent. Raw zeolites provided in sodium form as well as it modification in potassium form showed high sorption capacity for ammonium uptake but poor performance for phosphate recovery from waste water streams as the sorption mechanism is mainly ion exchange. Regeneration experiments showed that both Ze-Na and Ze-K can be reused several sorption-desorption working cycles without significant sorption capacity decrease (< 5%). Nevertheless, after salt modification to calcium and magnesium forms, the precipitation of phosphate salts was favoured obtaining hydroxyapatite and struvite in loaded Ze-Ca and Ze-Mg, respectively. As hydroxyapatite’s solubility and phosphorus availability is similar to commercial fertilizers, loaded Ze-Ca could be potentially recycled for agricultural uses. Finally, an economic assessment simulation was performed by applying Ze-Ca in the Baix Llobregat Waste Water Treatment Plant, located in the Metropolitan Area of Barcelona. The study reported that the implantation Ze-Ca filtration for nutrient recovery would be economically feasible, despite that more research is required in order to fit technical issues as the loaded sorbent disposal or the capability of loaded zeolites to be used as fertilizer.
En los últimos años se han llevado a cabo un gran número de estudios relacionados con la recuperación de nutrientes (sobre todo N y P) de aguas residuales con el fin de promover su reutilización y evitar la eutroficación . Recuperar nutrientes de aguas residuales puede promover la economía sircular , minimizar la huella de los tratamientos de aguas residuales, así como reducir la alteración antropogénica del ciclo natural del nitrógeno y el fósforo. Entre las diferentes técnicas estudiadas, la sorción es actualmente uno de las alternat ivas más Interesantes ya que requiere menos energía que técnicas electróquímicas o las tecnologías de membrana. Además , los sorbentes se pueden regenerar y reutilizar. Así , se ha caracterizado el comportamiento integral de diferentes sorbentes para la recuperación de nutrientes de efluentes de aguas residuales. Se evaluaron dos lntercambiadores iónicos poliméricos comerciales dopados con Óxido de Hierro Hidratado (Lewatit F036 y Fiban-As) para la eliminación de fosfato de corrientes de aguas residuales. Se llevaron a cabo estudios en equilibrio y se caracterizó la cinética mediante experimentos en discontinuo y los experimentos dinámicos se llevaron a cabo mediante columnas de lecho fijo . El estudio experimental cubrió desde soluciones monocomponentes de fosfato hasta corrientes reales de plantas de tratamiento de aguas residuales que contenían iones competidores, sólidos suspendidos y materia orgánica . Los experimentos reportaron para los dos sorbentes una alta selectividad hacia los iones fosfato, ya que no se observó una reducción significativa de la capacidad de sorción en presencia de iones competidores . Los sorbentes cargados se regeneraron mediante desorción alcalina y ácida para reutilizar el sorbents y obtener corrientes con alta concentración de fosfato, que se pueden emplear para la producción de fertilizante de alta calidad. Los resultados en columnas de lecho fijo mostraron una extracción de más del 80% del fosfato sorbido, aunque durante el proceso de desorción se vio una reducción de la capacidad de más del 30% tras tres ciclos de sorción - desorción. Además, se evaluaron zeolitas modificadas mediante tratamiento salino para ser usados tanto como sorbentes de una sola carga (en la forma divalente) como reusables (en la forma monovalente). La zeolita bruta facilitada en la forma sódica, así como la forma potásica mostraron alta capacidad para la eliminación de amonio, pero prácticamente nula capacidad de retención para los iones fosfato, ya que el mecansmo de sorción es principalmente intercambio iónico. Los experimentos de regeneración mostraron que ambas zeolitas se pueden emplear para un gran número de ciclos de sorción-desorción sin perder capacidad (<5%). Tras la modificación salida a las formas cálcica y magnésica, se favorece la precipitación de sales fosfóricas obteniendo hidroxiapatita y estruvita en la Ze-Ca y Ze-Mg cargada, espectivamente. Dada que la solubilidad de la hidroxiapatita, así como la disponibilidad del fósforo de la hidroxiapatita es similar a la de los fertilizantes comerciales, la Ze-Ca cargada puede potencialmente ser reciclado para usar en agricultura. Finalmente, se llevó a cabo una simulación económica empleando Ze-Ca en la Planta de Tratamiento de Aguas Residuales de El Baix Llobregat, situada en la Area metropolitana de Barcelona. El estudio reveló que la implantación de un filtro de Ze-Ca para la recuperación de nutrientes puuede ser económicamente viable , aunque se requieren más estudios para dar solución a aspectos técnicos como la gestión del sorbente cargado o la capacidad real de las zeolitas cargas de ser utilizadas como fertilizantes
Styles APA, Harvard, Vancouver, ISO, etc.
6

Falk, Thomas. « Safety Reviews of Technical System Modifications in the Nuclear Industry ». Licentiate thesis, KTH, Filosofi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-118843.

Texte intégral
Résumé :
The function of safety reviews (here understood as expert judgements on proposals for design modifications and redesign of technical systems in commercial Nuclear Power Plants, supported by formalised safety review processes) plays a fundamental role for safety in nuclear installations. The primary aims of the presented case studies includes: critically examining and identifying the main areas for improvement of the existing technical safety review process as it is conducted at a Swedish nuclear power plant, developing a new process, and evaluating whether any improvements were accomplished. By using qualitative methods, observation/participation and interviews, data has been gathered on how the safety review process is perceived and conducted by experts involved in the safety review process, and ways to improve this process have been developed. This area is neglected in the larger safety literature. The novel approach here is to gather data directly from those involved in the safety review process, analysis of safety review reports as well as from inspection reports by the regulatory authority. The study presented in paper I shows that the partition between primary and independent review is positive, having supplementary roles with different focus and staff with different skills and perspectives making the reviews. The study identifies a number of areas for improvement, such as: - a tendency to put too much resource on minor assignments - a clearer prioritization would improve focus on the most critical projects - there is a need for improved guidance and direction for how to structure the work It is argued that future applications of safety review processes should focus more on communicating and clarifying the process and its adherent requirements, and improve the feedback system within the process. It is also recommended that the NPPs create introductory training for new reviewers The study presented in paper II concluded that grading of the primary safety review reports facilitates improved experience feedback by providing easier access to good examples for reviewers. Improvements identified by implementing the revised process are primarily linked to the independent safety review function, including better planning and means for resource allocation as well as clearer and more unambiguous supporting instructions. Introduction of formalized independent review meetings provides increased exchange of knowledge and strengthened the independent safety review function in the organization.

QC 20130305

Styles APA, Harvard, Vancouver, ISO, etc.
7

Lindkvist, Jonas. « Social, Economical and Technical Evaluation of a reverse osmosis drinking water plant in the Stockholm Archipelago ». Thesis, KTH, Industriell ekologi, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-32777.

Texte intégral
Résumé :
The drinking water plant in this case study is a combined groundwater and reverse osmosisplant in the Stockholm archipelago. The reverse osmosis purification step was added to theplant in 1995. This technique is relatively new in Sweden and there are possibilities for it tobecome a good complement to conventional drinking water treatment. The plant has used thistechnique for over 10 years with good results. It is therefore of great interest to evaluate anddocument it for the possibility to implement this technique in areas not connected toconventional drinking water production.Reverse osmosis separates the incoming water to a clean permeate and concentrate ofremoved particles, larger molecules and ions. This technique has a high purification degree. Itcan remove dissolved particles and microorganisms without disinfection. However, it isrelatively expensive due to a high electricity consumption compared to conventional drinkingwater treatment. The high electricity consumption in this kind of system depends on aphenomenon called membrane fouling caused by the constituents in the raw water, graduallybecoming enriched on the membrane surface.The aim of this thesis was to evaluate and document a drinking water plant in the Stockholmarchipelago from a social, economical, technical and environmental perspective. A socialsurvey in the form of a questionnaire was conducted to reveal opinions about the water qualityprovided by the plant. The economical evaluation was done to estimate the cost of drinkingwater production and find the water cost in Kr/m3. The technical part involved documentationof the plant layout and evaluation of its performance. To assess the performance historicalchemical and microbial analyses were evaluated. A mass balance was attempted to drawconclusions for the overall system. The environmental part of the plant assessment, includedan estimate of the electricity and chemicals use in the plant.The results revealed that from an overall perspective the water quality from the plant issatisfactory with some concerns about metal taste and turbidity that sometimes occur. Thepotential presence of dangerous algal toxins in the water was also a concern. The totalproduction cost in Kr/m3 is higher than expected and higher than sales price. In technicalterms, the plant has functioned well. However, there is a need to monitor more parameters inthe plant including; more flow parameters, concentrations of added chemicals and more waterquality parameters. Electricity consumption has been higher than expected. Control(throttling) valves in the brine reject are relatively large energy consumers and arecommendation is to investigate potential savings by changing them for pressure exchangevalves.
www.ima.kth.se
Styles APA, Harvard, Vancouver, ISO, etc.
8

McSweeney, Andrew S. « An exploratory investigation of the implementation of Lean in a UK automotive plant ». Thesis, University of Bradford, 2017. http://hdl.handle.net/10454/16004.

Texte intégral
Résumé :
This thesis reflects upon several decades of research into Lean Production systems, highlighting the need for further investigation using an empirical study of exemplar implementations of Lean. The initial point of departure is an analysis of the current views of Lean based on a detailed literature review. The resulting Views of Lean Table provides a framework for the investigation of an exemplar Lean operation, viz the Nissan Sunderland Plant, widely regarded to be one of the most productive automotive plants in Europe. The exploratory nature of this investigation, and unique opportunity for access, argued for the use of an inductive single case study as an appropriate research approach. A four phase approach was used to; a) identify views of Lean, b) gain an initial understanding of the Nissan Production Way at the Nissan Sunderland Plant, b) acquire a detailed description of the Nissan Production Way and c) to assess the level of intrinsic motivation amongst employees. The primary objective of this research is to establish whether our current knowledge of Lean sufficiently encapsulates the concept’s many facets. Detailed semi-structured interviews with Nissan Production Way experts revealed that Nissan Sunderland Plant’s production system uses a large number of elements in contrast to the relatively narrow list of ‘Lean’ elements cited in the Views of Lean Table. In contrast to academic theory there was a focus on extrinsic motivation with low intrinsic motivation offset by the plant’s continuous fight for survival and ‘whatever-it-takes’ attitude. In practice Lean is viewed as an overarching philosophy with a toolkit encompassing a wide range of tools which are used when they are suitable for the task in hand.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Plucar, Tomáš. « Návrh experimentální solární sušárny ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229766.

Texte intégral
Résumé :
This Diploma’s thesis is addressing the issues of technical drying, principles and types of technical drying, solar drying possible usefulness of sewage sludge in the Czech Republic, its availability during the season, the legislation related to the processing of sewage sludge and design of pilot scale solar dryer.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Buchtová, Blanka. « Multiparametrická diagnostika generátoru ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-402514.

Texte intégral
Résumé :
The thesis is focused on multiparametric diagnostic of generators at the Dukovany nuclear power plant. One generator was chosen for the thesis and it was examined especially from the practical point of view. The thesis describes current state of the issue with focus on noise diagnostics, vibrodiagnostics and electrodiagnostics. The emphasis is on the system approach of the solution. In the practical part an experiment is designed, described and evaluated. Attention is paid to the conclusions of the performed vibrodiagnostics and noise diagnostics. Data sets are evaluated separately and the relationship between the two diagnostic methods is analyzed. Furthermore, the data set from electrodiagnostics is evaluated and dependencies of electrical diagnostic quantities on other quantities are described. Trends in electrical diagnostic quantities are also monitored. Conclusions and recommendations are formulated at the end of the thesis. It is stated that using multiparametric diagnostics to assess the status of generators in power plants is still in its beginning and that the conclusions of the submitted thesis will contribute to the developmnet in this area.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Livres sur le sujet "Technical plant"

1

Luigi, Guarino, Ramanatha Rao V et Reid Robert, dir. Collecting plant genetic diversity : Technical guidelines. Wallingford, Oxon, UK : CAB International, 1995.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Johnston, Scott M. Technical/agency draft recovery plan for Oahu plants. Portland, Or : U.S. Fish and Wildlife Service, 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Johnston, Scott M. Technical/agency draft recovery plan for Oahu plants. Portland, Or : U.S. Fish and Wildlife Service, 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Blank, Carol. The power plant writer : How to put power in your writing. Columbia, Md : GP Courseware, 1987.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Autry, Lara. Hot mix asphalt plants : Technical systems audit of testing at Plant C. Research Triangle Park, N.C : U.S. Environmental Protection Agency, Office of Air and Radiation, Office of Air Quality Planning and Standards, 2000.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

1958-, Fischer Rainer, et Schillberg Stefan, dir. Molecular farming : Plant-made pharmaceuticals and technical proteins. Weinheim : Wiley-VCH, 2004.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Parsons, Jenifer. Aquatic plant technical assistance program : 1995 activity report. Olympia, Wash : Washington State Dept. of Ecology, 1996.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Swenson, Chris. Recovery plan for three plant species on Nihoa Island : Technical/agency draft. Portland, Or : U.S. Fish and Wildlife Service, 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Lara, Autry, Jayanty R. K. M, Wright R. S, United States. Environmental Protection Agency. Office of Air Quality Planning and Standards., Emissions Measurement Center (U.S.) et Research Triangle Institute, dir. Hot mix asphalt plants : Technical systems audit of testing at plant "C," asphalt plant "C," Los Angeles, California. Research Triangle Park, N.C : U.S. Environmental Protection Agency, Office of Air and Radiation, Office of Air Quality Planning and Standards, 2000.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Service, U. S. Fish and Wildlife. Technical/agency draft recovery plan for four species of Hawaiian ferns. Portland, Or : U.S. Fish and Wildlife Service, 1997.

Trouver le texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Chapitres de livres sur le sujet "Technical plant"

1

Teitel, Simón. « Plant Technical Operating Capabilities ». Dans Technology and Skills in Zimbabwe’s Manufacturing, 65–73. London : Palgrave Macmillan UK, 2000. http://dx.doi.org/10.1057/9780230514027_7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Bhat, Rouf Ahmad, Dig Vijay Singh, Fernanda Maria Policarpo Tonelli et Khalid Rehman Hakeem. « Technical Challenges of Biofuel Obtainment ». Dans Plant and Algae Biomass, 135–46. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94074-4_8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Gregory, Brian D., et Dmitry A. Belostotsky. « Whole-Genome Microarrays : Applications and Technical Issues ». Dans Plant Systems Biology, 39–56. Totowa, NJ : Humana Press, 2009. http://dx.doi.org/10.1007/978-1-60327-563-7_3.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Williams, J. T. « Technical and political factors constraining reserve placements ». Dans Plant Genetic Conservation, 88–98. Dordrecht : Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-009-1437-7_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Kolster, P., J. M. Vereijken et L. A. de Graaf. « Protein Modification and Technical Applications ». Dans Plant Proteins from European Crops, 305–12. Berlin, Heidelberg : Springer Berlin Heidelberg, 1998. http://dx.doi.org/10.1007/978-3-662-03720-1_51.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Gistau Baguer, Guy. « A Helium Plant (System) Technical Specification ». Dans Cryogenic Helium Refrigeration for Middle and Large Powers, 577–83. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-51677-2_13.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Corvi, C., et G. Dinelli. « Technical Aspects of the Eurelios Plant Operation ». Dans Thermo-Mechanical Solar Power Plants, 10–20. Dordrecht : Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-5402-1_5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Berliaev, P. V., Yu V. Philimonov et L. N. Phalkovski. « Nuclear Heating Power Plant Technical Safety Decisions ». Dans Actinides and the Environment, 185–89. Dordrecht : Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-017-0615-5_13.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Jones, Peter W., et Alan C. Cassells. « Criteria for decision making in crop improvement programmes — Technical considerations ». Dans Developments in Plant Breeding, 465–76. Dordrecht : Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0357-2_57.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Bauer, M., S. Reusch, T. Engels et F. Wiesler. « Remote sensing — a tool for site-specific N management in sugar beet production without impacts on technical beet quality ? » Dans Plant Nutrition, 338–39. Dordrecht : Springer Netherlands, 2001. http://dx.doi.org/10.1007/0-306-47624-x_163.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Technical plant"

1

Mendiza´bal, R., et F. Pelayo. « BEPU Methodologies and Plant Technical Specifications ». Dans ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting collocated with 8th International Conference on Nanochannels, Microchannels, and Minichannels. ASMEDC, 2010. http://dx.doi.org/10.1115/fedsm-icnmm2010-31289.

Texte intégral
Résumé :
The Technical Specifications (TS) of a nuclear power plant define the conditions for a safe normal operation. With such an objective, the TS set limits on operational parameters of the plant and give surveillance requirements for the observation of such bounds. The values of TS limits are obtained from the safety analyses of the plant. In fact, the traditional conservative methodologies of deterministic safety analysis (DSA) have been profusely used in this task. Nevertheless, in recent years realistic (also termed BEPU) methodologies have started to replace the conservative ones. This new methodologies use realistic models and assumptions and implement techniques for performing uncertainty analysis of their results. Many of them are statistical, with a probabilistic representation of uncertainty, and based on the random sampling of uncertain inputs and uncertainty propagation to the outputs. In this paper the relation between BEPU safety analyses and TS is analyzed. The authors have a deep regulatory experience in the evaluation and licensing of DSA methodologies. Safety analyses are aimed at showing that the real operation of the plant is safe, but they have a stronger goal: to prove that the allowed operation of the plant is safe. BEPU methodologies are not fitted for the estimation of TS bounds. They rather are used to prove the coherence of the safety analysis with the preestablished TS. Procedures for proving such coherence, with different degree of strictness, are discussed in the case of Monte Carlo-based methodologies.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Hircock, N. C. « Gas Plant Environmental Noise ». Dans Annual Technical Meeting. Petroleum Society of Canada, 1992. http://dx.doi.org/10.2118/92-84.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Preusse, Sebastian, et Hans-Michael Hanisch. « Specification of technical plant behavior with a safety-oriented technical language ». Dans 2009 7th IEEE International Conference on Industrial Informatics (INDIN). IEEE, 2009. http://dx.doi.org/10.1109/indin.2009.5195876.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Turner, D. G. « Prevention Maintenance and Plant Turnaround Scheduling ». Dans Annual Technical Meeting. Petroleum Society of Canada, 1988. http://dx.doi.org/10.2118/88-39-36.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Kondo, Koichi, et Koichi Ohtomi. « Motion Planning in Plant CAD Systems ». Dans ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0119.

Texte intégral
Résumé :
Abstract This paper discusses a general and efficient method for solving the motion planning problem defined as checking the existence of a collision-free path among known stationary obstacles, and also presents its application to a plant CAD system. The basic approach taken in this method is to restrict the free space referred to in path searching and to avoid executing unnecessary collision detections. The configuration space is equally quantized into cells by placing a regular grid, and two new search strategies which enumerate restricted cells are introduced for realizing this method. One is a local strategy which enumerates free space cells only along the boundary of the free space in the configuration space. Another is a global strategy which finds the outer boundary of the free space. This method has been actually implemented and has been applied to an example in a nuclear power plant.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Jenkins, Brett, et Ray Kiesel. « Optimization of DTV Signals within a Transmission Plant ». Dans SMPTE Technical Conference. IEEE, 1998. http://dx.doi.org/10.5594/m00272.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Catalan, L. J. J., A. K. M. Jamaluddin, D. W. Stepanic et P. A. McNichol. « Solids Problem At the Ring Border Gas Plant ». Dans Annual Technical Meeting. Petroleum Society of Canada, 1995. http://dx.doi.org/10.2118/95-30.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Pruden, B. B., G. Muir et J. M. Denis. « CANMET Demonstration Plant Update ». Dans Technical Meeting / Petroleum Conference of The South Saskatchewan Section. Petroleum Society of Canada, 1987. http://dx.doi.org/10.2118/ss-87-19.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Silalahi, Mesnan, Denis Eka Cahyani, Dana Indra Sensuse et Indra Budi. « Developing indonesian medicinal plant ontology using socio-technical approach ». Dans 2015 International Conference on Computer, Communications, and Control Technology (I4CT). IEEE, 2015. http://dx.doi.org/10.1109/i4ct.2015.7219533.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Hermes, Tasha, et Serpil Metin. « Technical Opportunities Associated with Producing Plant-based Meat Protein ». Dans Virtual 2021 AOCS Annual Meeting & Expo. American Oil Chemists' Society (AOCS), 2021. http://dx.doi.org/10.21748/am21.143.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Technical plant"

1

Schultz, Richard R., Abderrafi M. Ougouag, David W. Nigg, Hans D. Gougar, Richard W. Johnson, William K. Terry, Chang H. Oh et al. Next Generation Nuclear Plant Methods Technical Program Plan. Office of Scientific and Technical Information (OSTI), décembre 2010. http://dx.doi.org/10.2172/911934.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Richard R. Schultz, Abderrafi M. Ougouag, David W. Nigg, Hans D. Gougar, Richard W. Johnson, William K. Terry, Chang H. Oh et al. Next Generation Nuclear Plant Methods Technical Program Plan. Office of Scientific and Technical Information (OSTI), décembre 2010. http://dx.doi.org/10.2172/1009143.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Richard R. Schultz, Abderrafi M. Ougouag, David W. Nigg, Hans D. Gougar, Richard W. Johnson, William K. Terry, Chang H. Oh et al. Next Generation Nuclear Plant Methods Technical Program Plan -- PLN-2498. Office of Scientific and Technical Information (OSTI), septembre 2010. http://dx.doi.org/10.2172/991886.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Larson, D. E., R. A. Watrous et O. L. Kruger. Hanford Waste Vitrification Plant technical manual. Office of Scientific and Technical Information (OSTI), mars 1996. http://dx.doi.org/10.2172/212483.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Blosser, Dennis. In-Plant Technical Assistance for Software. Fort Belvoir, VA : Defense Technical Information Center, septembre 1986. http://dx.doi.org/10.21236/ada182340.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Cicero, C. A., D. F. Bickford, D. M. Bennert et T. J. Overcamp. Rocky Flats Plant precipitate sludge surrogate vitrification demonstration. Technical Task Plan. Office of Scientific and Technical Information (OSTI), juin 1994. http://dx.doi.org/10.2172/10182189.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Author, Not Given. Independent technical review of the Pinellas Plant. Office of Scientific and Technical Information (OSTI), juillet 1994. http://dx.doi.org/10.2172/10103593.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Heintschel, Cliff Lynn, et Holly Lynn Wheeler. Technical Area 3 Power and Steam Plant. Office of Scientific and Technical Information (OSTI), février 2016. http://dx.doi.org/10.2172/1239073.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

O'Connor, Sharon L., Donnie Wayne Whitehead et Claude S. ,. III Potter. Nuclear power plant security assessment technical manual. Office of Scientific and Technical Information (OSTI), septembre 2007. http://dx.doi.org/10.2172/921722.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Heintschel, Cliff Lynn, et Holly Lynn Wheeler. Stormwater Pollution Prevention Plan for : Technical Area 3 Power and Steam Plant. Office of Scientific and Technical Information (OSTI), janvier 2016. http://dx.doi.org/10.2172/1253479.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Technical plant » pour d’autres types de sources :
Articles de revues Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie