Littérature scientifique sur le sujet « TAGUCHI ANALYSIS »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « TAGUCHI ANALYSIS ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "TAGUCHI ANALYSIS"
Struzikiewicz, Grzegorz, Wojciech Zębala et Ksenia Rumian. « Application of Taguchi Method to Optimization of Cutting Force and Temperature during Turning of Difficult to Cut Materials ». Key Engineering Materials 686 (février 2016) : 114–18. http://dx.doi.org/10.4028/www.scientific.net/kem.686.114.
Texte intégralRaji, Akinwale Olusegun, et Sunday Ayoola Oke. « Enhancement of Maintenance Downtime Using Poisson Motivated-Taguchi Optimization Method ». Al-Nahrain Journal for Engineering Sciences 22, no 4 (20 décembre 2019) : 294–306. http://dx.doi.org/10.29194/njes.22040294.
Texte intégralMarakini, Vikas, Srinivasa P. Pai, Uday K. Bhat, Dinesh Thakur Singh et Bhaskar P. Achar. « High Speed Machining for Enhancing the AZ91 Magnesium Alloy Surface Characteristics Influence and Optimisation of Machining Parameters ». Defence Science Journal 72, no 1 (5 janvier 2022) : 105–13. http://dx.doi.org/10.14429/dsj.72.17049.
Texte intégralSriprateep, Keartisak, Puttipong Patumchat et Wasan Theansuwan. « Application of Taguchi Method in the Optimization of Cutting Parameters for Turning Metal Matrix Composite ». Advanced Materials Research 189-193 (février 2011) : 3056–60. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.3056.
Texte intégralBiswas, A., S. Bhaumik, Gautam Majumdar, Saurav Datta et S. S. Mahapatra. « Bead Geometry Optimization of Submerged Arc Weld : Exploration of Weighted Principal Component Analysis (WPCA) ». Applied Mechanics and Materials 110-116 (octobre 2011) : 790–98. http://dx.doi.org/10.4028/www.scientific.net/amm.110-116.790.
Texte intégralDas, Dipayan, et Rashmi Thakur. « Taguchi analysis of fabric shrinkage ». Fibers and Polymers 14, no 3 (mars 2013) : 482–87. http://dx.doi.org/10.1007/s12221-013-0482-z.
Texte intégralNguyen, Vi, Faisal Altarazi et Thanh Tran. « Optimization of Process Parameters for Laser Cutting Process of Stainless Steel 304 : A Comparative Analysis and Estimation with Taguchi Method and Response Surface Methodology ». Mathematical Problems in Engineering 2022 (21 mai 2022) : 1–14. http://dx.doi.org/10.1155/2022/6677586.
Texte intégralAbdulrusool, Ahmed, et Sarah Jalal Mosa. « The Effective of Pressure and Sintering Temperature for Hardness Characteristics of Shape Memory Alloy by Using Taguchi Technique ». Journal of Engineering 22, no 1 (1 janvier 2016) : 159–71. http://dx.doi.org/10.31026/j.eng.2016.01.10.
Texte intégralGothwal, Pushpa, Ajay Kumar et Rishi Dewanagan. « Taguchi Analysis of Walking Pathway for Power Optimization ». E3S Web of Conferences 399 (2023) : 04004. http://dx.doi.org/10.1051/e3sconf/202339904004.
Texte intégralAnggamawarti, Merlina Fitri, Luana Putri Alviari, Yudistira Sanjiwani et Victor Yuardi Risonarta. « Quality Analysis of 5.56 mm Ammunition Defect using Taguchi Method : A Review ». International Journal of Mechanical Engineering Technologies and Applications 1, no 1 (27 janvier 2020) : 29. http://dx.doi.org/10.21776/mechta.2020.001.01.5.
Texte intégralThèses sur le sujet "TAGUCHI ANALYSIS"
Bae, Suk Joo. « Analysis of dynamic robust design experiment and modeling approach for degradation testing ». Diss., Available online, Georgia Institute of Technology, 2004:, 2003. http://etd.gatech.edu/theses/available/etd-04052004-180010/unrestricted/bae%5Fsuk%5Fj%5F2003%5Fphd.pdf.
Texte intégralBlackhall, Robert Brian. « Taguchi methods and texture profile analysis applied to the manufacture of rotary moulded biscuits ». Thesis, Heriot-Watt University, 2003. http://hdl.handle.net/10399/424.
Texte intégralDHIMAN, ROHIT. « TAGUCHI ANALYSIS TO OBTAIN OPTIMAL PARAMETERS FOR SURFACE ROUGHNESS ANALYSIS OF STIR CAST ALUMINIUM MMC ». Thesis, 2019. http://dspace.dtu.ac.in:8080/jspui/handle/repository/16814.
Texte intégral林明正. « Mold flow simulation is analysis by taguchi method ». Thesis, 2000. http://ndltd.ncl.edu.tw/handle/66288618601167255014.
Texte intégralYu, Ti-Hsuan, et 於迪萱. « Taguchi method based probabilistic optimal load flow analysis ». Thesis, 2016. http://ndltd.ncl.edu.tw/handle/25308033942236058139.
Texte intégral國立中央大學
電機工程學系
104
As the penetration of distributed generation goes up rapidly, the traditional power system is faced with challenges. One of the most severe problems for renewable energy is the fluctuation of the output power. If the output power of distributed generators could not be consumed by local loads, inverse load flow may occur. As a result, developing three-phase unbalanced load flow algorithms for distribution system considering distributed generation seem to be particularly important. By means of day-ahead scheduling, operators could take it as a reference to make an optimal decision. This thesis proposes a novel probabilistic load flow method that is based on Taguchi’s orthogonal arrays from Taguchi method. The proposed method only needs to sample probabilistic variables through orthogonal arrays and utilize few deterministic load flows to obtain the mean and standard deviation of bus voltages. An optimal experiment is also achieved through main effects from Taguchi’s method with the largest deviation from the nominal line-flow result. This thesis also presents a more practical model for distributed generators. To proof the well-behavior of this model, some abnormal operation scenarios are demonstrated. When over-voltage or low-voltage situation occurs caused by excess output power from wind turbine and PV, the model will acquire a voltage set point from optimal algorithm in order to absorb or generate reactive power to improve voltage profile considering the deviation of demands and output power from renewable energies. The simulation results were compared with results attained by Monte Carlo simulation (MCS) and point estimate method (PEM). A 25-bus Penghu system, an IEEE 118-bus system and a modified 12-bus feeder in Taiwan are used as test systems. The results show that the proposed method attains both accurate means and standard deviations of bus voltages and line flows and is time-saving.
Chang, Chia-Hsun, et 張家訓. « Cost analysis of overusing electricity in optoelectronic industry with Taguchi analysis ». Thesis, 2014. http://ndltd.ncl.edu.tw/handle/80404698708126147527.
Texte intégral國立彰化師範大學
電機工程學系
102
The major objective of this study is to analyze the better way to solve the overusing electricity with the Taguchi analysis method by choosing the overusing additional charge or the backup generator fuel cost. The methods of minimum costs will be found in solving the over usage of electricity by means of orthogonal arrays, analysis of covariance, responded charts and graphics, and even the STB (Smaller the Best). Taking the advantage of the minimum costs on overusing electricity will help to decrease more extra expanses as well. By adopting the derived principle on 2012, the charge of overusing electricity would be reduced by about 21.72%. As to 2013, the charge without using the backup generator is lower than that with using the backup generator by about 61.58% which is about three million NT dollars.
Wang, Yu-Shang, et 王玉盛. « Mechanics Analysis of Diagonal Pliers by Using Taguchi Method ». Thesis, 2016. http://ndltd.ncl.edu.tw/handle/95308150772071496403.
Texte intégral國立雲林科技大學
機械工程系
104
The diagonal pliers is a kind of hand tool with high rigidity which is commonly seen on the market. The diagonal pliers can be used for cutting thin strings of Iron and copper, and the diagonal pliers can also be used for stripping a plastic surface that surrounds a wire. However, there is on specific standard of manufacturing diagonal pliers on market. Therefore, in this research of diagonal pliers, we focus on changing three parameters of pliers and look for the best result. The purpose of this research will focus on the parameters of the diagonal pliers, such as the distance of shaft(35.8mm), the cutting edge(30o), and the angle of cutting(30o). We analyze the stress on cutting of the products which are sold on the market. We change the distance of the shafts, the angle of cutting tools, and the edge of cutters, in order to look for the effect of stress. Then we use the software of the finite element analysis to simulate the cutting stress of diagonal pliers, and we also find out the parameters combination of minimum cutting stress by using the Taguchi Method. We also can find out the maximum cutting times of diagonal pliers with the same scales through this researching result. As the result, the stress from the cutting face will decrease by lengthening the distance of the shafts, increasing the cutting edge and the angle of the cutters. Besides, as these three parameters coming out, we can tell that the lengths between the shafts have the largest influence for the cutting stress.
LI, CHIEN-JEN, et 李健仁. « Torque Analysis of Cordless Impact Driver by Taguchi Method ». Thesis, 2008. http://ndltd.ncl.edu.tw/handle/54606184715826704702.
Texte intégral逢甲大學
材料與製造工程所
96
Over the last decade, electric tool companies have mushroomed all over Taiwan. Although the process capability is continued to be promoted, the price competition is also intense at the same time, and causes low gross profit ratio. Recently energy shortage has resulted in the price rising of global raw materials, so the Profitability of Taiwan''s power tool companies is limited. That is why product specifications and features have to be further improved, and meanwhile research and development (R&D) cycle must be shortened. This essay tries to analyze those components which all will affect the torque output of impact drivers. They are motors, hammering blocks, spring and steel balls, and their basic specifications, features and principles will be further analyzed by Taguchi Method of Product Design to obtain the experiment data in the least experiment frequency in order to find out the their best tie-in parameters. After that, these parameters will be verified by real experiments to confirm the models formed by Taguchi Method.The result shows that the important components are impact blocks, motors, springs and steel balls in sequence. The best tie-in parameter of impact drivers’ torque output, which confirmed by experiments, is 31 N-m compared with the original 17 N-m. That means the max. torque is increased by 14 N-m. Furthermore, this research result can be the future reference of the structural design for those R&D and design people.
Chen, Jui-Hsuan, et 陳睿軒. « Optimum Design Analysis of Bicycle Frame by Taguchi Method ». Thesis, 2010. http://ndltd.ncl.edu.tw/handle/87686017650140091504.
Texte intégral國立高雄第一科技大學
機械與自動化工程所
98
The urban bicycle is used as a studied example. The design variables of a bicycle frame are achieved by Taguchi method. Utilizing the software, ANSYS/LS-DYNA, the safety requirements of bicycle test simulation analysis is presented. The important design parameters of a bicycle frame for the deformation and mass are obtained by the experimental design method, Taguchi method and the analysis of variance. For the minimum deformation and mass of bicycle frame, the best design parameters for bicycle frames can be found. In addition. the regression equation can be obtained by orthogonal arrays. Finally, the best design parameters from the regression analysis are consistent with the results by Taguchi method.
YI, CHEN CHEN, et 陳振益. « The Wear Analysis of Milling Tool - Using Taguchi Method ». Thesis, 2008. http://ndltd.ncl.edu.tw/handle/06808291895481298457.
Texte intégral大葉大學
機械工程研究所碩士在職專班
96
Due to the high growth rate of manufacturing industry for 3C products, automobile application and tools, the complexity and process precision of components have been required. During the process, the surface precision, time of process and efficiency are strongly influenced by cutting tool wear and coating. Therefore, it is important to study the surface coating on the cutting tool. Firstly, in order to discover the differences between cutting parameters and flank wear, an end mill without coating treatment has been using in a changing circumstances of cutting speed, feed rate and depth of cut during process. After discovering the influence of cutting parameters and flank wear, based on Taguchi method end mills with variety of coating treatment were used for an experiment and the main purpose of this experiment is to show the ability of anti-flank wear by using different coated end mills. According to an observation from SEM, by using the coated end mills with different processing conditions of coating, the different thickness of coat on those mills has no significant influence on flank wear. Finally, based on the result of hardness test, the direct ratio of cutting hardness to thickness is shown.
Livres sur le sujet "TAGUCHI ANALYSIS"
United States. National Aeronautics and Space Administration., dir. Preliminary structural design of a lunar transfer vehicle aerobrake. [Washington, DC ? : National Aeronautics and Space Administration, 1992.
Trouver le texte intégralH, Park Sung. Robust design and analysis for quality engineering. London : Chapman & Hall, 1996.
Trouver le texte intégralRivadossi, Silvia. Sciamani urbani. Venice : Fondazione Università Ca’ Foscari, 2020. http://dx.doi.org/10.30687/978-88-6969-414-1.
Texte intégralJOSHI, G. R. OPTIMIZATION by GREY RELATIONAL ANALYSIS and TAGUCHI METHOD : Application of Grey Relational Analysis and Taguchi Method for Optimization of the Wire-Cut Edm Process. Independently Published, 2021.
Trouver le texte intégralRuefer, Herbert. Living Without Mathematical Statistics : Accurate Analysis, Diagnosis, and Prognosis Based on the Taguchi Method. Springer, 2018.
Trouver le texte intégralRuefer, Herbert. Living Without Mathematical Statistics : Accurate Analysis, Diagnosis, and Prognosis Based on the Taguchi Method. Springer, 2018.
Trouver le texte intégralRuefer, Herbert. Treffsichere Analysen, Diagnosen und Prognosen : Leben ohne Statistik nach Genichi Taguchi. Springer Vieweg, 2018.
Trouver le texte intégralChapitres de livres sur le sujet "TAGUCHI ANALYSIS"
Sharma, Prashank, Chandan Singh Mehra, Utkarsh Jha, Sachin et Anil Kumar. « Design of Sandwich Panel Using Taguchi Analysis ». Dans Advances in Materials and Mechanical Engineering, 179–91. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0673-1_15.
Texte intégralPardo, Scott A. « Taguchi Methods® and Robust Design ». Dans Empirical Modeling and Data Analysis for Engineers and Applied Scientists, 223–39. Cham : Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-32768-6_15.
Texte intégralKackar, Raghu N. « Taguchi’s Quality Philosophy : Analysis and Commentary ». Dans Quality Control, Robust Design, and the Taguchi Method, 3–21. Boston, MA : Springer US, 1989. http://dx.doi.org/10.1007/978-1-4684-1472-1_1.
Texte intégralAntony, Jiju, et Mike Kaye. « Analysis and Interpretation of Data from Taguchi Experiments ». Dans Experimental Quality, 151–93. Boston, MA : Springer US, 2000. http://dx.doi.org/10.1007/978-1-4615-5293-2_9.
Texte intégralNair, Vijay, et Daryl Pregibon. « A Data Analysis Strategy for Quality Engineering Experiments ». Dans Quality Control, Robust Design, and the Taguchi Method, 289–309. Boston, MA : Springer US, 1989. http://dx.doi.org/10.1007/978-1-4684-1472-1_14.
Texte intégralWolf, A., D. Henes, S. Bogdanski, Th Lutz et E. Krämer. « Statistical Analysis of Parameter Variations Using the Taguchi Method ». Dans Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 247–64. Berlin, Heidelberg : Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-36185-2_10.
Texte intégralNi, Yudong, Yuanyuan Li et Yindong Shen. « An Improved Artificial Bee Colony Algorithm and Its Taguchi Analysis ». Dans Communications in Computer and Information Science, 104–17. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-2829-9_11.
Texte intégralGupta, Ajay Kumar, Pankaj Kumar et R. K. Sahoo. « Numerical Analysis of Pulse Tube Cryocooler and Optimization Using Taguchi Method ». Dans Lecture Notes in Mechanical Engineering, 253–64. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4165-4_24.
Texte intégralAhmad, Mohd Nazri, et Abdul Rashid Mohamad. « Analysis on Dimensional Accuracy of 3D Printed Parts by Taguchi Approach ». Dans Lecture Notes in Mechanical Engineering, 219–31. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7309-5_22.
Texte intégralChohan, J. S., R. Kumar et S. Singh. « Analysis of Dimensional Accuracy of Fused Filament Fabrication Parts Using Genetic Algorithm and Taguchi Analysis ». Dans Materials Forming, Machining and Tribology, 105–13. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-04301-7_7.
Texte intégralActes de conférences sur le sujet "TAGUCHI ANALYSIS"
Tsai, S. C., et K. M. Ragsdell. « Orthogonal Arrays and Conjugate Directions for Taguchi-Class Optimization ». Dans ASME 1988 Design Technology Conferences. American Society of Mechanical Engineers, 1988. http://dx.doi.org/10.1115/detc1988-0035.
Texte intégralSaurabh, J. S. Jassi, Aas Mohammad, D. P. Singh et Hasan Zakir Jafri. « Machining parameter optimization using Taguchi approach ». Dans 2015 International Conference on Futuristic Trends on Computational Analysis and Knowledge Management (ABLAZE). IEEE, 2015. http://dx.doi.org/10.1109/ablaze.2015.7154964.
Texte intégralHorng, Ji-Bin. « Analysis of corotron charging by Taguchi method ». Dans Color Hard Copy and Graphic Arts. SPIE, 1992. http://dx.doi.org/10.1117/12.2322219.
Texte intégralHorng, Ji-Bin, et Derray Huang. « Analysis of corotron charging by Taguchi method ». Dans SPIE/IS&T 1992 Symposium on Electronic Imaging : Science and Technology, sous la direction de Jan Bares. SPIE, 1992. http://dx.doi.org/10.1117/12.59678.
Texte intégralTseng, Wen-Keng, King-Chu Hung, Frank Yih-Fong Tzeng et Tsung-Ching Wu. « Taguchi analysis for quality stabilization of coffee roast ». Dans 2017 International Conference on Applied System Innovation (ICASI). IEEE, 2017. http://dx.doi.org/10.1109/icasi.2017.7988460.
Texte intégralWallace, Jon M., Stephanie Wojcik et Dimitri N. Mavris. « Robust Design Analysis of a Gas Turbine Component ». Dans ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/gt2003-38546.
Texte intégralHwang, Joon, et Woo-Jung Kang. « Analysis of Sewage Sludge Treatment Process Using Taguchi Method ». Dans ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82679.
Texte intégralWang, Gou-Jen, Jhy-Cherng Tsai, Pai-Chung Tzeng et Tsorng-Chi Chen. « Neural-Taguchi Method for Robust Design ». Dans ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/cie-1327.
Texte intégralBaranescu, Rodica A., Satish D. Desai et David A. Ginder. « Optimization Analysis of a Diesel Engine Using Cycle Analysis and Taguchi Methods ». Dans 1989 SAE International Off-Highway and Powerplant Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 1989. http://dx.doi.org/10.4271/891895.
Texte intégralLin, Heng Cheng, Chieh Kung et Rong Shen Chen. « Taguchi Robust Analysis of Fatigue of Lead-Free Sn3.5Ag Solders ». Dans ASME 2007 InterPACK Conference collocated with the ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ipack2007-33597.
Texte intégralRapports d'organisations sur le sujet "TAGUCHI ANALYSIS"
Kim, Minho, et Junghwan Lim. A Study on the Optimum Design of Pre-Heater System by Using CFD Analysis and Taguchi Method. Warrendale, PA : SAE International, mai 2005. http://dx.doi.org/10.4271/2005-08-0330.
Texte intégral