Littérature scientifique sur le sujet « Surface analisy »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Surface analisy ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Surface analisy"
Nieć, Jakub, Anna Nieć, Paweł Zawadzki et Marcin Spychała. « The time analysis of land surface pollution on the example of measurement of phenol’s concentration and the analysis of its decomposition ». Acta Scientiarum Polonorum Formatio Circumiectus 14, no 4 (2016) : 75–84. http://dx.doi.org/10.15576/asp.fc/2015.14.4.75.
Texte intégralMiranda, João Lucas Costa de. « ILEGALIDADES NO TRANSPORTE FRETADO DE PASSAGEIROS POR APLICATIVO EM LINHAS CONCEDIDAS NO ESTADO DE MINAS GERAIS ». Revista Jurídica 20, no 1 (5 février 2021) : 39–57. http://dx.doi.org/10.37951/2236-5788.2020v20i1.p39-57.
Texte intégralKubišová, M., V. Pata, L. Sýkorová, L. Hýlová et O. Šuba. « Multi-parameter surface-quality analysis ». Materiali in tehnologije 52, no 1 (2 février 2018) : 23–26. http://dx.doi.org/10.17222/mit.2017.095.
Texte intégralFerdinandus, Aprildy Randy Andrew, et Santo Junital Bumbungan. « Analisis Pengaturan Quarter-Car Active Suspension Menggunakan Neuro-Fuzzy Adaptif PID Control ». Jurnal Fokus Elektroda : Energi Listrik, Telekomunikasi, Komputer, Elektronika dan Kendali) 6, no 4 (30 novembre 2021) : 203. http://dx.doi.org/10.33772/jfe.v6i4.21764.
Texte intégralBorg, E. « Semantic Category and Surface Form ». Analysis 58, no 3 (1 juillet 1998) : 232–38. http://dx.doi.org/10.1093/analys/58.3.232.
Texte intégralRahmawati, Anita, Dian Setiawan, Mohammad Aby Yansun Pangestu et Robith Azkal Aulia. « ANALISIS KERUSAKAN JALAN MENGGUNAKAN PROGRAM KENPAVE TERHADAP TEBAL PERKERASAN YANG DIDESIGN MENGGUNAKAN METODE ANALISA KOMPONEN, AUSTROAD DAN ASPHALT INSTITUTE ». Jurnal Media Teknik Sipil 16, no 2 (31 décembre 2018) : 79. http://dx.doi.org/10.22219/jmts.v16i2.6428.
Texte intégralTOPRAK, İnayet Burcu, Oğuz ÇOLAK et Mustafa BAYHAN. « Tİ-6AL-4V ALAŞIMININ FREZELENMESİNDE YÜZEY PÜRÜZLÜLÜĞÜNÜN REGRESYON ANALİZİ İLE MODELLENMESİ ». Mühendislik Bilimleri ve Tasarım Dergisi 10, no 2 (30 juin 2022) : 620–30. http://dx.doi.org/10.21923/jesd.886739.
Texte intégralStošić, Nenad, Jelena Popović, Marija Anđelković-Apostolović, Aleksandar Mitić, Marija Nikolić et Radomir Barac. « Ultrastructural analysis of the surface changes on the nickel-titanium endodontic instruments after multiple use ». Acta Facultatis Medicae Naissensis 38, no 3 (2021) : 291–98. http://dx.doi.org/10.5937/afmnai38-29386.
Texte intégralBryk, Maja. « Evaluation of Soil Aggregate Surface Roughness by Image Analysis ». Soil Science Annual 63, no 2 (1 juin 2012) : 9–13. http://dx.doi.org/10.2478/v10239-012-0016-1.
Texte intégralLeon, Stephen, G. Bharathiraja et V. Jayakumar. « Experimental analysis on friction stir welding using flat-faced pins in AA2024-T3 plate ». FME Transactions 49, no 1 (2021) : 78–86. http://dx.doi.org/10.5937/fme2101078s.
Texte intégralThèses sur le sujet "Surface analisy"
Beumier, Charles. « Authentification d'identité par analyse tridimensionnelle du visage ». Phd thesis, Télécom ParisTech, 2003. http://pastel.archives-ouvertes.fr/pastel-00000620.
Texte intégralBearzi, Yohann. « Analyse locale de surface avec la base des Wavejets : définition de nouveaux invariants intégraux et application à l'amplification de détails géométriques ». Thesis, Lyon, 2019. http://www.theses.fr/2019LYSE1240.
Texte intégralSurface analysis is a challenging research topic, which has gathered a lot of interest over the last few decades. When surface data is given as a set of points, which are the typical output of 3D laser scanners, the lack of structure makes it even more challenging. In this thesis, we tackle surface analysis by introducing a new function basis: the Wavejets. This basis allows to decompose locally the surface into a radial polynomial component and an angular frequency component. Stability properties with regards to a bad normal direction are demonstrated. By linking Wavejets coefficients to a high order differential tensor, we also define high order principal directions on the surface. Furthermore, locally splitting surfaces with respect to frequencies leads us to define new integral invariants, permitting to locally describe the surface. Such descriptors are quite robust since they result from an integration process. Finally, we develop an application of these new integral invariants for geometric detail amplification, either based on point position or on normal direction modification, creating in this case the illusion of a surface change
Bouyssel, François. « Analyse variationnelle des paramètres de surface ». Toulouse 3, 2001. http://www.theses.fr/2001TOU30074.
Texte intégralKhawaja, Zahra. « Analyse des états de surface en science des matériaux : caractérisation multi-échelles par ondelette et détermination de l'anisotropie des surfaces ». Thesis, Compiègne, 2014. http://www.theses.fr/2014COMP2139/document.
Texte intégralMonitoring and control of the state of the surfaces is a major need for industry. Numerous studies on the interactions between the surface morphology and the physical, chemical or mechanical mechanisms have been conducted. However, a more precise characterization related to industrial domains and needs is necessary. It consists in finding the most relevant roughness parameters that connect the topography of a surface with the physical phenomena which it undergoes or in the properties of the material of which it consisted.In this work, a software designed to characterize the surface condition was developed. This tool named "MesRug" allows to calculate roughness parameters then extract the most relevant ones and to define the most appropriate scale for a given application. The search for the most relevant parameters is done by a statistical approach (analysis of variance ANOVA combined with the theory of Bootstrap).A characterization was performed using (2D) data of measurement on abrasive surfaces. The influence of the form of discrete and continuous wavelet on the detection on the relevant scale mechanism of the abrasion was tested. We conclude that the wavelet decomposition allows to quantify and localize the scales of abrasion of the machining process for all process parameters. However, the relevance of appropriate scales to characterize abrasion does not depend on the shape of the wavelet.In this work, a new 3D roughness parameter is proposed to quantify the smoothness of a surface, independently of the amplitude and the scanning length units of the surface. The efficiency of this parameter is tested on noisy periodic surfaces with varying degrees of anisotropy. The value of this parameter is between zero (perfect sound) and 100 % (sine perfect surface). It enables us to identify the anisotropy directions of regularity for a given surface
Comard, Marie-Pierre. « Caractérisation de surfaces solides hétérogènes : étude du couplage de la chromatographie gazeuse inverse à dilution infinie avec la modification de surface par imprégnation contrôlée par des macromolécules ». Vandoeuvre-les-Nancy, INPL, 2001. http://www.theses.fr/2001INPL586N.
Texte intégralBen, Mansour Fathi. « Etude des phénomènes de surface et d'interface au cours de la croissance de couches minces de métaux nobles (Au, Ag, Cu) sur des surfaces réelles (100) de silicium et de germanium ». Montpellier 2, 1990. http://www.theses.fr/1990MON20130.
Texte intégralWieland, Sandra. « Modellierung und mathematische Analyse kontaminierter dünner Flüssigkeitsfilme ». Bonn : Mathematisches Institut der Universität, 2003. http://catalog.hathitrust.org/api/volumes/oclc/62768196.html.
Texte intégralFIGUEIREDO, SAVIO WESLLEY OLIVEIRA. « STRAIN SENSITIVITY ANALISYS OF A SURFACE ACOUSTIC WAVE RESONATOR DEVICE ». PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2017. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=33356@1.
Texte intégralCOORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO
PROGRAMA DE EXCELENCIA ACADEMICA
Os sensores de deformação convencionais, por exemplo, os strain gages resistivos e ópticos, consagrados pelo mercado, são empregados em diferentes ambientes e estruturas, oferecendo um nível de flexibilidade que permite sua integração a vários tipos de sistemas de medição. No entanto, requerem uma fonte de energia elétrica local ou não podem funcionar sem cabos, limitando o seu uso em alguns cenários, como em partes móveis de máquinas. Os dispositivos SAW (Surface Acoustic Wave) podem ser usados como sensores de deformação piezoelétricos, pois possuem sensibilidade à deformação e podem operar de forma passiva por meio de antenas, podendo ser integrados a sistemas de monitoramento sem fio. Seu funcionamento é baseado em ondas de superfície geradas em um meio piezoelétrico. O estado de tensão na superfície do meio altera as características dessas ondas e induz mudanças na frequência de operação. O presente trabalho analisou a sensibilidade à deformação de dispositivos SAW ressonadores feitos de quartzo ST-X com frequência central de 433,92 MHz colados com diferentes adesivos, e testou sua operação como sensores passivos sem fio. A metodologia incluiu testes de tração não destrutivos em diferentes temperaturas e também simulações com elementos finitos. Os resultados experimentais mostraram relação linear entre a variação de frequência dos ressonadores e as deformações aplicadas, concordando com a literatura. A interrogação sem fio foi bem sucedida, confirmando o grande potencial dessa tecnologia. Os resultados numéricos, combinados a um modelo teórico, foram próximos aos experimentais, validando o modelo numérico.
The conventional strain sensors, e.g., resistive and optical strain gages, established in the market, are deployed in different environments and structures, providing the flexibility of integration with different measurement systems. However, they require a local energy source to work or cables, limiting their use in some scenarios such as moving parts of machines. The SAW (Surface Acoustic Wave) devices can be used as piezoelectric strain sensors since they have sensitivity to strain, can operate passively by antennas and can be integrated to wireless monitoring systems. Its working principle is based on surface acoustic waves generated on piezolectric medium. The stress state of the medium changes the characteristics of these waves and induces changes in the operating frequency. The present work analyzed the strain sensitivity of SAW resonators made of ST-X cut quartz operating at a central frequency of 433,92 MHz, bonded with different adhesives, and tested their operation as passive wirelesss sensors. The methodology included non-destructive tensile testing at different temperature, and also finite elements simulations. The experimental results showed linear relation between the frequency change and the applied strain, agreeing with the literature. The wireless interrogations was successful, confirming the great potential of this technology. The numerical results, combined to a theoretical model, matched well the experiments, validating the model.
Li, Wan-Chiu. « Conversion automatique de maillages en surfaces splines ». Thesis, Vandoeuvre-les-Nancy, INPL, 2006. http://www.theses.fr/2006INPL078N/document.
Texte intégralAiming at converting a triangular mesh into a CAGD/CAM spline surface, this thesis focuses on one of the most crucial problems of the conversion process, i.e. extracting a “good” quadrilateral control mesh of the surface. What we mean by good is that the edges of the control mesh should be orthogonal and aligned with the principal directions of curvature of the surface. These two properties make the control mesh optimum in an approximation point of view, and greatly help to reduce unwanted oscillations on the final spline surface built from it. To solve this problem, we propose a new automatic algorithm, called periodic global parameterization. The basic idea is to find a “geometry-meaningful” parameterization guided by a pair of orthogonal anisotropic direction fields. Then, the iso-value lines of this parameterization will be extracted to define an initial control mesh, that satisfies the two criteria of a good control mesh. With the initial control mesh, we explain how to construct a T-spline approximation of the initial triangulated surface. We show several examples of the triangular mesh to T-spline conversion. The results show that thanks to the anisotropic control meshes, the final spline surfaces generated have much less oscillations as compared to results of previous methods, that do not take into account of the anisotropy
Soysouvanh, Davy. « Mesure optique de la topographie des papiers ». Grenoble INPG, 2007. http://www.theses.fr/2007INPG0081.
Texte intégralSeveral stages in the manufacturing process of paper aim to improve the surface quality. The reason is that several important properties of paper, such as the brightness or the friction, enormously depend on the surface, just as the quality of the printing. The traditional methods to characterize pa pers are based on flows of air on their surface. However, those appear to be too much limited and do not allow to access the topography. We evaluated severa 1 optical methods of measurement of microtopography and we adopted the full-field method of white light interferometry. While working on the optics and on the algorithms of measurement, we adapted the method to the very specifie case of rough and strongly diffusing surfaces. The instrument that has been developped is used today in several applications and on various materials met in the paper mi Il, where it allows simple measurements, precisely and very rapidly
Livres sur le sujet "Surface analisy"
Wieczorowski, Michał. Wykorzystanie analizy topograficznej w pomiarach nierówności powierzchni. Poznań : Wydawn. Politechniki Poznańskiej, 2000.
Trouver le texte intégralWieczorowski, Michał. Wykorzystanie analizy topograficznej w pomiarach nierówności powierzchni. Poznań : Wydawn. Politechniki Poznańskiej, 2000.
Trouver le texte intégralJ, Pesek Joseph, Leigh Ivan E, Royal Society of Chemistry (Great Britain). et Symposium on Chemically Modified Surfaces (5th : 1993 : Malvern, Penn.), dir. Chemically modified surfaces. Cambridge : Royal Society of Chemistry, 1994.
Trouver le texte intégralTubielewicz, Krzysztof. Analiza zjawisk towarzyszących odkształceniu warstwy wierzchniej w procesie nagniatania. Częstochowa : Wydawn. Politechniki Częstochowskiej, 1990.
Trouver le texte intégralA, Delchar T., dir. Modern techniques of surface science. Cambridge [Cambridgeshire] : Cambridge University Press, 1986.
Trouver le texte intégralA, Delchar T., dir. Modern techniques of surface science. 2e éd. Cambridge : Cambridge University Press, 1994.
Trouver le texte intégralC, Rivière J., et Myhra S. 1943-, dir. Handbook of surface and interface analysis methods for problem-solving. 2e éd. Boca Raton : Taylor & Francis, 2009.
Trouver le texte intégral1947-, Kohli Rajiv, et Mittal K. L. 1945-, dir. Developments in surface contamination and cleaning : Fundamentals and applied aspects. Norwich, NY, U.S.A : W. Andrew Pub., 2008.
Trouver le texte intégralT, Hubbard Arthur, dir. The Handbook of surface imaging and visualization. Boca Raton : CRC Press, 1995.
Trouver le texte intégral1941-, MacDonald R. J., Taglauer E et Wandelt K. 1944-, dir. Surface science : Principles and current applications. Berlin : Springer, 1996.
Trouver le texte intégralChapitres de livres sur le sujet "Surface analisy"
Shustorovich, Evgeny. « Cluster-Surface Analogy : New Developments ». Dans Quantum Chemistry : The Challenge of Transition Metals and Coordination Chemistry, 445–64. Dordrecht : Springer Netherlands, 1986. http://dx.doi.org/10.1007/978-94-009-4656-9_32.
Texte intégralCandy, Jean-Pierre, Christophe Copéret et Jean-Marie Basset. « Analogy between Surface and Molecular Organometallic Chemistry ». Dans Surface and Interfacial Organometallic Chemistry and Catalysis, 151–210. Berlin, Heidelberg : Springer Berlin Heidelberg, 2005. http://dx.doi.org/10.1007/b138076.
Texte intégralWu, Dong Jiang, Xian Suo Cao, Hang Gao et Ren Ke Kang. « Surface Damage Analyse of KDP Crystal Grinding ». Dans Advanced Materials Research, 349–54. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-461-8.349.
Texte intégralYakovlev, Andrey B., et Valeriya S. Federyaeva. « Analytical Solution for the Electric Field Response Generated by a Nonconducting Ellipsoid (Prolate Spheroid) in a Conducting Fluid Subject to an External Electric Field ». Dans Brain and Human Body Modeling 2020, 383–89. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-45623-8_22.
Texte intégralChoi, K. S. « Breakdown of the Reynolds Analogy over Drag-Reducing Riblets Surface ». Dans Advances in Turbulence IV, 149–54. Dordrecht : Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1689-3_25.
Texte intégralLin, Yuxu, Chun Chen, Mingli Song, Jiajun Bu et Zicheng Liu. « Implicit Surface Reconstruction with an Analogy of Polar Field Model ». Dans Advances in Image and Video Technology, 436–48. Berlin, Heidelberg : Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-92957-4_38.
Texte intégralGohin, F. « Analyse Structurale de La Temperature de Surface de La Mer ». Dans Geostatistics, 433–44. Dordrecht : Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-015-6844-9_33.
Texte intégralZheng, Feidong, Xueyi Li, Fan Zhang et Ping Mu. « Evolution of Undular Surges in a Navigation Channel ». Dans Lecture Notes in Civil Engineering, 394–405. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-6138-0_35.
Texte intégralDolbeault, Pierre, et Gennadi Henkin. « Surfaces de Riemann de bord donne dans CPn ». Dans Contributions to Complex Analysis and Analytic Geometry / Analyse Complexe et Géométrie Analytique, 163–87. Wiesbaden : Vieweg+Teubner Verlag, 1994. http://dx.doi.org/10.1007/978-3-663-14196-9_6.
Texte intégralBradshaw, A. M. « Can we Put the Cluster-Surface Analogy on a Sound Structural Basis ? » Dans The Synergy Between Dynamics and Reactivity at Clusters and Surfaces, 1–20. Dordrecht : Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0133-2_1.
Texte intégralActes de conférences sur le sujet "Surface analisy"
Karron. « Mathematical Analysk Of "spiderweb" Surface Construction Algorithm. » Dans Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE, 1992. http://dx.doi.org/10.1109/iembs.1992.594807.
Texte intégralPopa, Gabriel Nicolae, Corina Maria Dinis, Ioan Baciu et Sorin Ioan Deaconu. « Automotive PM Surface Alternator, Analyse with Experiments ». Dans 2021 International Conference on Applied and Theoretical Electricity (ICATE). IEEE, 2021. http://dx.doi.org/10.1109/icate49685.2021.9465009.
Texte intégralBhattacharya, Sayak, et Kushal Shah. « Pitfalls in the analogy between spoof surface plasmon and surface plasmon polariton ». Dans International Conference on Fibre Optics and Photonics. Washington, D.C. : OSA, 2014. http://dx.doi.org/10.1364/photonics.2014.s5a.47.
Texte intégralWELLS, VALANA. « Integrating the acoustic analogy for supersonic rotating surfaces ». Dans 12th Aeroacoustic Conference. Reston, Virigina : American Institute of Aeronautics and Astronautics, 1989. http://dx.doi.org/10.2514/6.1989-1133.
Texte intégralFrey, Christian, Graham Ashcroft, Jan Backhaus, Edmund Ku¨geler et Jens Wellner. « Adjoint-Based Flow Sensitivity Analyis Using Arbitrary Control Surfaces ». Dans ASME 2011 Turbo Expo : Turbine Technical Conference and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/gt2011-45041.
Texte intégralRanganathan, Soundararajan, Hari Nishok Rangasamy Suguna Thangaraj, Aravind Kumar Vasudevan et Dharshan Karthick Shanmugan. « Analogy of Thermal Properties of Polyamide 6 Reinforced with Glass Fiber and Glass Beads through FDM Process ». Dans International Conference on Advances in Design, Materials, Manufacturing and Surface Engineering for Mobility. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2019. http://dx.doi.org/10.4271/2019-28-0137.
Texte intégralWood, C. M., T. B. Ellis, D. P. Teague et B. R. Cox. « Analyst I : Comprehensive Analysis of the UTexas1 Surface Wave Dataset ». Dans Geo-Congress 2014. Reston, VA : American Society of Civil Engineers, 2014. http://dx.doi.org/10.1061/9780784413272.080.
Texte intégralMartin, A. J. « Analyst H : Analysis of the Active and Passive UTexas1 Surface Wave Dataset Collected to Quantify Inter-Analyst Uncertainty ». Dans Geo-Congress 2014. Reston, VA : American Society of Civil Engineers, 2014. http://dx.doi.org/10.1061/9780784413272.079.
Texte intégralMichaels, P. « Analyst A : Alternatives in Analysis of the UTexas1 Surface Wave Dataset ». Dans Geo-Congress 2014. Reston, VA : American Society of Civil Engineers, 2014. http://dx.doi.org/10.1061/9780784413272.074.
Texte intégralMoss, Robb Eric S. « Analyst B : Analysis of the UTexas1 Passive Linear Surface Wave Dataset ». Dans Geo-Congress 2014. Reston, VA : American Society of Civil Engineers, 2014. http://dx.doi.org/10.1061/9780784413272.075.
Texte intégralRapports d'organisations sur le sujet "Surface analisy"
Tanika, Lisa, Betha Lusiana et Adis Hendriatna. Simulasi Dampak Perubahan Tutupan Lahan dan Iklim di DAS Citarum Hulu dengan Model GenRiver : Kalibrasi model dan analisa sensitivitas. World Agroforestry, 2020. http://dx.doi.org/10.5716/wp20048.pdf.
Texte intégralThomas, Douglas, et Mellon Michael. Sublimation of terrestrial permafrost and the implications for ice-loss processes on Mars. Engineer Research and Development Center (U.S.), juillet 2021. http://dx.doi.org/10.21079/11681/41244.
Texte intégralBorrett, Veronica, Melissa Hanham, Gunnar Jeremias, Jonathan Forman, James Revill, John Borrie, Crister Åstot et al. Science and Technology for WMD Compliance Monitoring and Investigations. The United Nations Institute for Disarmament Research, décembre 2020. http://dx.doi.org/10.37559/wmd/20/wmdce11.
Texte intégralÀ la croisée des chemins : Tendances dominantes dans la reconnaissance des droits fonciers communautaires entre 2002 et 2017. Rights and Resources Initiative, septembre 2018. http://dx.doi.org/10.53892/qpej4692.
Texte intégral