Articles de revues : « Supply customization »

1

Liu, Li. « Supply Chain Management under Mass Customization ». Advanced Materials Research 616-618 (décembre 2012) : 2044–47. http://dx.doi.org/10.4028/www.scientific.net/amr.616-618.2044.

Texte intégral

Résumé :

Traditional supply chain is established on mass production while supply chain under mass customization is established on mass customization. In the paper, Definition of Supply Chain Management is introduced; Comparison between Traditional Supply Chain and Supply Chain under Mass Customization, State of the field are all illustrated. Under mass customization, in order to adapt to customer driving manufacturing and the demands of enterprise alliance, manufacturers and major enterprises will directly contact with customers to weaken or even eliminate the function of distributors and retail dealers, which will lead to the transformation of the supply chain structure to open network structures made up of suppliers, manufacturers, core enterprises and customers.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Salvador, F., M. Rungtusanatham et C. Forza. « Supply-chain configurations for mass customization ». Production Planning & ; Control 15, n^o 4 (juin 2004) : 381–97. http://dx.doi.org/10.1080/0953728042000238818.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Wang, Zhi Liang, Yun Xia Wang et Yun Lu. « Analysis of Customization Cost Structural Model Based on Supply Chain ». Advanced Materials Research 139-141 (octobre 2010) : 1654–59. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.1654.

Texte intégral

Résumé :

Providing customization product with reasonable cost for customers is one of keys for enterprise to gain competition advantage, customized product’ cost depends on customization level and postponement strategy under supply chain. As to a kind of customization product consisting of multi modules with different customer order decoupling point(CODP), this paper builds a class push/pull supply chain pattern by combining postponement with the supply chain based on analyzing customized product’s logistics / production process and customers demand transfer process, and presents a customization cost structural model. The impact of different customization degree and postponement realization form on customized product’ holding cost and total cost is also analyzed respectively. This analysis and calculation of total cost through an algorithm are helpful to find the appropriate customization degree and the reasonable postponement strategy. At last, an illustrative example is given.

Styles APA, Harvard, Vancouver, ISO, etc.

4

Chen, Su. « Analysis of Customization Strategy for E-Commerce Operation Based on Big Data ». Wireless Communications and Mobile Computing 2021 (19 février 2021) : 1–11. http://dx.doi.org/10.1155/2021/6626480.

Texte intégral

Résumé :

In order to improve the efficiency of customization and reduce the cost of customization under Big data environment, this paper uses cost-sharing contract, pricing mechanism, Hotelling model, and game theory tools and research methods, for C2B Electronic Commerce (e-commerce) mode of Supply Chain Pricing Strategy for in-depth discussion. This paper first gives the architecture of the customization service system based on big data. The paper studies the game equilibrium of supply chain members under four scenarios: centralized decision-making, decentralized decision-making, C2B-dominated decision-making, and traditional enterprise-dominated decision-making in a supply chain composed of a supplier and C2B e-commerce enterprises with horizontal price competition, and examines the cross-price. Important parameters such as impact coefficient, impact coefficient of effort degree of personalized customization, and so on have an impact on variables such as effort degree of personalized customization, retail price, and profit of supply chain members of C2B e-commerce enterprises. Research shows that with the increase of cross-price impact coefficient, C2B e-commerce will enhance its personalized customization efforts in different situations in order to pursue higher profits.

Styles APA, Harvard, Vancouver, ISO, etc.

5

Liu, Li. « Supply Chain Management in Domestic Mobile Phone Industry under Mass Customization ». Advanced Materials Research 616-618 (décembre 2012) : 2026–29. http://dx.doi.org/10.4028/www.scientific.net/amr.616-618.2026.

Texte intégral

Résumé :

The detailing of professional division of mobile phone components and parts lays a solid foundation to implement mass customization manufacturing mode in real mobile phone industry. Under mass customization, effective operation of the supply chain cannot do without advanced information system as well as progressive supply chain management methods and technology application. This article states the method of mass customization in mobile phone enterprises mainly from aspects like customer relation management, differentiation delay strategy, products structure and supply chain management in the stage of process development design, logistics management of mobile phones and supply chain coordination management, etc.

Styles APA, Harvard, Vancouver, ISO, etc.

6

TIEN, JAMES M. « DATA MINING REQUIREMENTS FOR CUSTOMIZED GOODS AND SERVICES ». International Journal of Information Technology & ; Decision Making 05, n^o 04 (décembre 2006) : 683–98. http://dx.doi.org/10.1142/s0219622006002167.

Texte intégral

Résumé :

Customized goods and services occur when their respective supply and demand chains are managed in a simultaneous and real-time manner. From a research perspective, we classify the methods that are employed in the management of these chains, based on whether supply and/or demand are flexible or fixed. Interestingly, our classification scheme highlights a critical and rewarding research area at which both supply and demand are flexible, thus manageable. Simultaneous management of supply and demand chains sets the stage for mass customization which is concerned with meeting the needs of an individualized customer market. Simultaneous and real-time management of supply and demand chains, in turn, set the stage for real-time mass customization (e.g. wherein a tailor first laser scans an individual's upper torso and then delivers a uniquely fitted jacket within a reasonable period, while the individual is waiting). The benefits of real-time mass customization cannot be over-stated as products and services become indistinguishable and are co-produced in real-time, resulting in an overwhelming economic advantage. Customized goods and services can only be achieved through sophisticated data mining techniques that can define the customization requirements from both a supply and a demand chain perspective, techniques that can obtain pertinent information from the mass of non-homogeneous data, in order to make informed customization decisions.

Styles APA, Harvard, Vancouver, ISO, etc.

7

Jafari, Hamid, Hadi Ghaderi, Mohammad H. Eslami et Mohsin Malik. « Leveraging supply integration, mass customization and manufacturing flexibility capabilities and the contingency of innovation orientation ». Supply Chain Management : An International Journal 27, n^o 7 (28 novembre 2022) : 194–210. http://dx.doi.org/10.1108/scm-05-2022-0177.

Texte intégral

Résumé :

Purpose This paper aims to examine the relationship between supply integration and firm performance by first, investigating the mediating effects of manufacturing flexibility and mass customization; and second, exploring the moderating role of innovation orientation on the link between internal capabilities and performance. Design/methodology/approach Resource orchestration and contingency theories are used to address the mediating and moderating effects. A cross-sectional data set on 242 Swedish manufacturers is used to test for the hypotheses using structural equation modeling. Findings The findings provide support for the mediating roles of manufacturing flexibility and mass customization in the relationship between supply integration and firm performance. However, the results point to contrasting contingent effects of innovation orientation. While innovation orientation positively moderates the association between mass customization and firm performance, it shows a negative impact on the link between flexibility and performance. Research limitations/implications The study contributes to the literature on the integrative activities with upstream supply chain actors. Specifically, the authors highlight how specific capability configurations comprising of supply integration, manufacturing flexibility and mass customization lead to firm performance. Moreover, the authors provide insights on the contingency role of innovation, especially if firms consider flexibility or customization capabilities. Originality/value While the individual impacts of flexibility and customization on performance have been addressed previously, there is a paucity of research on how these two capabilities are integrated with supply integration. Moreover, there is little known regarding the role of innovation orientation on these integrated relationships.

Styles APA, Harvard, Vancouver, ISO, etc.

8

Sun, Haoyu, Huiqi Zheng, Xiaoyang Sun et Wei Li. « Customized Investment Decisions for New and Remanufactured Products Supply Chain Based on 3D Printing Technology ». Sustainability 14, n^o 5 (22 février 2022) : 2502. http://dx.doi.org/10.3390/su14052502.

Texte intégral

Résumé :

Three-dimensional printing and customized products are gradually emerging, and many manufacturers use 3D printing technology to customize products according to the individual needs of consumers. We focus on the differential pricing of new products and remanufactured products after being customized by 3D printing and the profit distribution of supply chain members. Through building the Stackelberg game model led by the manufacturer, we discuss how supply chain members should make investment decisions about customized new and customized remanufactured products with the goal of maximizing the manufacturer’s profit when there are two models of remanufacturing by the OEM and remanufacturing by the retailer. Finally, through the simulation analysis of MATLAB, we explain how the manufacturer and the retailer make decisions under the influence of customization sensitivity coefficient and customization cost. We also analyze the impact of relevant factors on the level of customization effort and whether supply chain members are suitable for custom production. We found that when the level of customization effort is relatively low, both the manufacturer and the retailer should choose the manufacturer to complete the customization process. However, when the level of customization effort is relatively high the manufacturer can transfer the customization process to the retailer, but the retailer should still let the manufacturer lead the customization process for his own profit maximization.

Styles APA, Harvard, Vancouver, ISO, etc.

9

Liu, Chun Ling, et Shuang Shuang Liu. « Driving Model of Implementing Mass-Customization Manufacturing in Cluster Supply Chain ». Applied Mechanics and Materials 697 (novembre 2014) : 478–81. http://dx.doi.org/10.4028/www.scientific.net/amm.697.478.

Texte intégral

Résumé :

To explore the attributes of cluster supply chain, and provide its driving model (2P&2BP) for more effective and more efficient way in implementing mass customization. The paper analyzes cluster supply chain driving model for implementing mass customization manufacturing using data from case study from 8 garment and IT industrial clusters. In process of implementing mass customization, we found that cluster supply chain has supplying level, marketing level and supplementing level to support its driving model (2P&2BP: Pull/push/burst power/bottleneck press) rather than conventional pull\push model. thus SMEs (small and medium-sized enterprises) in industrial cluster would have chances to extensively participate cooperate with core companies in the form of supply chain, thus expanding gradually.

Styles APA, Harvard, Vancouver, ISO, etc.

10

Wang, Jian, et Huijuan Jiang. « Price and Service Competition in a Dual-Channel Supply Chain with Product Customization ». Complexity 2021 (26 mars 2021) : 1–35. http://dx.doi.org/10.1155/2021/8833174.

Texte intégral

Résumé :

This paper considers a dual-channel supply chain with product customization. One manufacturer and one retailer are involved. The online direct sales channel sells standard and customized products, and the offline retail channel sells standard products. The prices and service levels of products sold via different channels are differentiated, and the customization level which influences the customization cost and choices of customers is decided by the manufacturer. Three game models are proposed: the manufacturer Stackelberg (MS) model, the retailer Stackelberg (RS) model, and the Nash game model. The price and service decisions of the players are derived. Meanwhile, a service-cost-sharing contract is designed for the MS model. The impacts of price and service competition, service cost, and customers sensitivity to the customization level on the optimal decisions are investigated. Through the numerical analysis, we find that, among the three models, the manufacturer Stackelberg model is the most beneficial game structure for the overall supply chain but has the largest revenue gap between the two members. Second, under price competition and service competition, the manufacturer should differentiate the prices and services for direct sales standard products and customized products according to his market status. Third, the manufacturer should increase customization expenditures to construct his customization production line and provide more diversified products when consumers are more sensitive to product customization.

Styles APA, Harvard, Vancouver, ISO, etc.

11

Liu, Weihua, Qian Wang, Donglei Zhu et Yang Liu. « A Determination Method of Optimal Customization Degree of Logistics Service Supply Chain with Mass Customization Service ». Discrete Dynamics in Nature and Society 2014 (2014) : 1–14. http://dx.doi.org/10.1155/2014/212574.

Texte intégral

Résumé :

Customization degree is a very important field of mass customization. Its improvement could enhance customer satisfaction and further increase customer demand while correspondingly it will increase service price and decrease customer satisfaction and demand. Therefore this paper discusses how to deal with such issues in logistics service supply chain (LSSC) with a logistics service integrator (LSI) and a customer. With the establishment of customer demand function for logistics services and profit functions of the LSI and the customer, three different decision modes are proposed (i.e., customization degree dominated by LSI, customization degree dominated by customer, and customization degree decided by concentrated supply chain); many interesting findings are achieved. Firstly, to achieve customization cooperation between LSI and customer, measures should be taken to make the unit increase cost of the customized logistics services lower than a certain value. Secondly, there are differences between the optimal customization degree dominated by LSI and that dominated by customer. And in both cases, the dominator could realize more profit than the follower. Thirdly, with the profit secondary distribution strategy, the modified decentralized decision mode could accomplish the maximum profit achieved in centralized decision mode and meanwhile get the optimal customization degree.

Styles APA, Harvard, Vancouver, ISO, etc.

12

Ukhanov, A. P., D. A. Ukhanov et Ye A. Khokhlova. « Tractor diesel customization for mixed fuel burning ». Traktory i sel hozmashiny 80, n^o 10 (15 octobre 2013) : 14–16. http://dx.doi.org/10.17816/0321-4443-65700.

Texte intégral

Résumé :

The fuel supply system is presented, that along with the standard units and aggregates includes the mixer with active drive ensuring quality mixing mineral and biological components, supply of prepared mixed fuel to fuel injection pump and its injection into diesel cylinders.

Styles APA, Harvard, Vancouver, ISO, etc.

13

Kaczmarek, Marta, et Mariusz Jedliński. « Global supply chain customization on hearing aids market ». Europa Regionum 32 (2017) : 73–90. http://dx.doi.org/10.18276/er.2017.32-06.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

14

Liu, Gensheng (Jason), et George D. Deitz. « Linking supply chain management with mass customization capability ». International Journal of Physical Distribution & ; Logistics Management 41, n^o 7 (9 août 2011) : 668–83. http://dx.doi.org/10.1108/09600031111154125.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

15

Zhang, Min, Xiande Zhao, Marjorie A. Lyles et Hangfei Guo. « Absorptive capacity and mass customization capability ». International Journal of Operations & ; Production Management 35, n^o 9 (7 septembre 2015) : 1275–94. http://dx.doi.org/10.1108/ijopm-03-2015-0120.

Texte intégral

Résumé :

Purpose – The purpose of this paper is to investigate the effects of a manufacturer’s absorptive capacity (AC) on its mass customization capability (MCC). Design/methodology/approach – The authors conceptualize AC within the supply chain context as four processes: knowledge acquisition from customers, knowledge acquisition from suppliers, knowledge assimilation, and knowledge application. The authors then propose and empirically test a model on the relationships among AC processes and MCC using structural equation modeling and data collected from 276 manufacturing firms in China. Findings – The results show that AC significantly improves MCC. In particular, knowledge sourced from customers and suppliers enhances MCC in three ways: directly, indirectly through knowledge application, and indirectly through knowledge assimilation and application. The study also finds that knowledge acquisition significantly enhances knowledge assimilation and knowledge application, and that knowledge assimilation leads to knowledge application. Originality/value – This study provides empirical evidence of the effects of AC processes on MCC. It also indicates the relationships among AC processes. Moreover, it reveals the mechanisms through which knowledge sourced from customers and suppliers contributes to MCC development, and demonstrates the importance of internal knowledge management practices in exploiting knowledge from supply chain partners. Furthermore, it provides guidelines for executives to decide how to manage supply chain knowledge and devote their efforts and resources in absorbing new knowledge for MCC development.

Styles APA, Harvard, Vancouver, ISO, etc.

16

Kwon, Chil-Yong, Jung-Sik Jang et Gyoo-Suk Kim. « A 3D Printed Physical Human–Robot Interface Based on a Sizing System to Facilitate Customization : Wearable Robots for Paraplegia ». Applied Sciences 11, n^o 11 (1 juin 2021) : 5143. http://dx.doi.org/10.3390/app11115143.

Texte intégral

Résumé :

Wearable robots that assist paraplegia patients should be manufactured according to the shape of the individual wearer. With the development of advanced three-dimensional (3D) printing technologies, such customizations are becoming available. However, conventional 3D printing customization requires extensive template remodeling, which is non-productive and inefficient. This study proposes a 3D-printed (3DP) physical human–robot interface (pHRI) based on a sizing system that facilitates customization to body shapes. The proposed system is a pre-developed pHRI in various sizes and shapes using a human body shape database. Conformity of shapes and dimensions were evaluated visually via shape deviation analysis for 10 persons having paraplegia. With the proposed 3DP-pHRI, the trunk comprised 18 sections and the shank comprised nine. A biased trend of coverage rates in the shank 3DP-pHRI size system was identified. The trunk and shank subsystems were found to be adequate in terms of shapes and dimensions, with values within the mean deviation range of ±10 mm. A novel 3DP-pHRI size system facilitating customization tool for fabricating wearable robots for paraplegia patients according to body shape was developed, and its effectiveness was assured. The new system can be used for various wearable robot pHRIs, and the database is expected to supply a comprehensive pHRI template library.

Styles APA, Harvard, Vancouver, ISO, etc.

17

Wu, Qun, Kun Liao, Xiaodong Deng et Erika Marsillac. « Achieving automotive suppliers’ mass customization through modularity ». Journal of Manufacturing Technology Management 31, n^o 2 (27 août 2019) : 306–29. http://dx.doi.org/10.1108/jmtm-12-2018-0459.

Texte intégral

Résumé :

Purpose Previous literature tends to combine postponement and modularity or view them as parallel factors to achieve mass customization (MC) while ignoring the sequence of a firm to design and implement operations and supply chain strategy. Based on a customer-oriented strategy and theories of organizational information processing theory, three-dimensional (3D) concurrent engineering and resource dependency, the purpose of this paper is to propose a sequential model reflecting the sequence of practices as well as an overview picture for a firm to achieve MC. Design/methodology/approach The model links three company antecedents – postponement orientation, operational alignment and information sharing, to three company supply chain practices – product and process modularity and supplier segmentation. These practices, in turn, lead to the company’s MC capabilities. The proposed model is tested with a data set collected from automotive suppliers in China and in the USA. Structural equation modeling is used to analyze the data and test the model. Findings The results suggest that, for suppliers to achieve MC, postponement orientation and operational alignment are vital antecedents. The results also reveal the important responsibility and role of information sharing practices in coordinating suppliers’ modularity practices. Originality/value This research provides three findings that are of value to both academicians and practitioners of supply chain management. First, this study originally proposed and empirically tested that a postponement orientation is an antecedent of product and process modularity and supplier segmentation to achieve MC in the automotive sector, contrary to the traditional view of parallel relationships for both. Second, it developed and verified measures of operational alignment and supplier segmentation for future research use. Third, the vital role of information sharing to coordinate internal and external supply chain practices to achieve MC is empirically supported.

Styles APA, Harvard, Vancouver, ISO, etc.

18

Zhang, Rong, Jiatong Li, Zongsheng Huang et Bin Liu. « Return Strategies and Online Product Customization in a Dual-Channel Supply Chain ». Sustainability 11, n^o 12 (25 juin 2019) : 3482. http://dx.doi.org/10.3390/su11123482.

Texte intégral

Résumé :

This paper investigates in a dual-channel supply chain which return strategy is better for the manufacturer that considers the consumers’ utility. We find that a manufacturer prefers offering a Money-Back Guarantee (MBG) as long as the net salvage value of the returned product is positive in a channel. However, the return strategy of the retailer is more affected by the return policy of another channel than the net salvage value. In order to reduce online returns, we propose the online product customization channel, and then, we examine the choice of return policy and the manufacturer’s channel selection. We show that the demand and profit of the manufacturer will increase to a certain extent when opening an online customization channel. However, compared to the case where both channels provide an MBG, the implementation of online customization may hurt the manufacturer’s profits with the increase in consumer satisfaction in indirect channels.

Styles APA, Harvard, Vancouver, ISO, etc.

19

Larsson, Jonas, Joel Peterson et Heikki Mattila. « The knit on demand supply chain ». Autex Research Journal 12, n^o 3 (12 novembre 2012) : 67–75. http://dx.doi.org/10.2478/v10304-012-0013-9.

Texte intégral

Résumé :

The knit on demand supply chain As customers’ tastes become more differentiated, so must companies’ offerings evolve. The demand for variety may soon become unmanageable, and several companies are addressing this trend by adopting a system of mass customization. One project, Knit on Demand, has been conducted by the Swedish School of Textiles in close collaboration with a knitting company and a retailer of tailored fashion in Stockholm. Production and sales of customized products pose logistical challenges for the companies involved, including the one-piece flow through almost the entire supply chain and the demand for short lead times in an otherwise slow environment, adding to the cost of manufacturing mass customized garments. Customization has logistical benefits such as minimised inventory; hence, high inventory turnover and the possibility of fast response to meet customer demand. The Knit on Demand concept can be considered as leagile because it comprises both lean and agile components. It is lean in the manufacturing stage upstream and agile downstream to better respond to customer demand on the market.

Styles APA, Harvard, Vancouver, ISO, etc.

20

Liu, Chang, et Jianming Yao. « Dynamic supply chain integration optimization in service mass customization ». Computers & ; Industrial Engineering 120 (juin 2018) : 42–52. http://dx.doi.org/10.1016/j.cie.2018.04.018.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

21

Yao, Jianming, et Liwen Liu. « Optimization analysis of supply chain scheduling in mass customization ». International Journal of Production Economics 117, n^o 1 (janvier 2009) : 197–211. http://dx.doi.org/10.1016/j.ijpe.2008.10.008.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

22

Cheung, C. F., C. M. Cheung et S. K. Kwok. « A Knowledge-based Customization System for Supply Chain Integration ». Expert Systems with Applications 39, n^o 4 (mars 2012) : 3906–24. http://dx.doi.org/10.1016/j.eswa.2011.08.096.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

23

Kakati, M. « Mass customization – needs to go beyond technology ». Human Systems Management 21, n^o 2 (4 avril 2002) : 85–93. http://dx.doi.org/10.3233/hsm-2002-21201.

Texte intégral

Résumé :

In recent time, mass customization strategy is considered in some industries as those trends, if not taken up, that might make firms lose their markets to the competitors. Thus, managers concerned with strategic issues might adopt new technology as the only means of implementing this strategy. Often they might make an error in doing so. Mass customization is a completely discontinuous leap from mass production and requires a major paradigm shift and breakthrough thinking. Understanding customers is the starting point, not the dizzying possibilities of technology to produce variety that nobody wants. Mass customization requires careful preparation in every stage of the supply chain and also enriching buying experience of customers. Innovation, quality improvement, time, flexibility, and cost management in every stage are essential pre-requisite of mass customization program. This paper critically analyses some of the issues of mass customization program and suggests measures for successful implementation of a mass customization strategy.

Styles APA, Harvard, Vancouver, ISO, etc.

24

Rosyidi, Cucuk Nur, Nina Salsabila Sulistiani et Pringgo Widyo Laksono. « A Mixed Integer Linear Programming Model of Order Allocation Involving Mass Customization Logistic Service (MCLS) ». CAUCHY : Jurnal Matematika Murni dan Aplikasi 7, n^o 3 (11 octobre 2022) : 474–82. http://dx.doi.org/10.18860/ca.v7i3.15398.

Texte intégral

Résumé :

In an increasing business competition, a company has to improve its competitiveness by focus more on supply chain management. One of the crucial problems in supply chain deals with the allocation of orders. More and more companies are starting to adoptMass Customization Logistics Service (MCLS) mode to determine the optimal allocations of order both from suppliers and to customized logistics services at the possible lowest cost. For this purpose, a third party is needed, namely Logistic Service Integrator (LSI) in providing logistics services. However, since LSI cannot meet all customer needs, LSI chooses to outsource logistics tasks to a Functional Logistics Service Provider (FLSP). This research was developed to help decision-makers ofmanufacturing companies in making optimal decision concerning order allocations that minimize the total supply chain costs involving Mass Customization Logistics Service (MCLS).

Styles APA, Harvard, Vancouver, ISO, etc.

25

Brun, Alessandro, et Hakan Karaosman. « Customer influence on supply chain management strategies ». Business Process Management Journal 25, n^o 2 (1 avril 2019) : 288–306. http://dx.doi.org/10.1108/bpmj-05-2017-0133.

Texte intégral

Résumé :

PurposeCustomers influence companies’ operational strategies and supply chain (SC) processes. In this vein, signals coming from the market must be translated into proper strategies in terms of production and supply. The purpose of this paper is to provide an understanding on how to transform customers’ expectations into SC decisions. The yacht industry, encompassing both technical and emotional peculiarities, becomes this study’s driven focus to interrogate the interrelationship between supply and demand.Design/methodology/approachThe study explores the luxury yacht industry through exploratory case studies conducted with eight companies operating in Italy.FindingsIt was found that a wide range of factors influenced customers. That is to say, brand reputation, other brands’ involvement in the final product and emotional appeal were the most distinguishing characteristics identifying emotion-oriented customers. In this sense, companies serving such customers adjusted their SC strategies to channel a direct emotional impact. It was noticed that personalization was pivotal and companies were increasingly required to customize and create unique products to attract and further satisfy the customers. Thus, multiple sourcing strategies were often employed with an increasing number of suppliers to ensure that increasing material supply need would be met. As for performance-oriented companies, cost, quality and innovation capabilities emerged as key signals to be embedded in operations management. Companies serving performance-oriented customers were characterized by low product value and medium level of customization, and kept their core activities, including design and architecture, vertically integrated. In order to generate cost advantages without compromising product quality, single sourcing strategy was largely implemented. What the findings suggested is that the customization level and the product value were positively correlated. To illustrate, companies having more exclusive products were found allowing their customization and customer involvement in higher degrees.Originality/valueDue to a relatively unexplored nature of the phenomenon, this study opted for a method by which individual and collective reconstructions were explored in a not well-investigated area, that is, the luxury yacht industry.

Styles APA, Harvard, Vancouver, ISO, etc.

26

(Jason) Liu, Gensheng, Weiyong Zhang et Chundong Guo. « Impacts of supply chain planning and integration on mass customization ». Journal of Manufacturing Technology Management 29, n^o 3 (16 avril 2018) : 608–28. http://dx.doi.org/10.1108/jmtm-08-2017-0162.

Texte intégral

Résumé :

PurposeEffective mass customization (MC) depends on accurately identifying customer needs and procuring appropriate components from supply base to manufacture the required product configurations in a timely manner. In essence, effective MC for a focal firm is contingent on effective supply chain management. However, extant literature is not very clear on how supply chain (SC) planning and integration activities affect MC. The purpose of this paper is to fill the gap by examining the impacts of SC-planning and SC-integration on MC.Design/methodology/approachOrganizational information processing theory is used to link SC-integration with MC ability, and a link is hypothesized between SC-planning and SC-integration. The structural equation model is then analyzed using data from 262 manufacturing plants.FindingsIt is found that SC-integration fully mediates the relationship between SC-planning and MC-ability.Research limitations/implicationsThe SC-integration measure is from a focal manufacturer’s standpoint, rather than the standpoint of the entire SC.Practical implicationsThe results indicate that using a SC perspective in planning activities helps a focal firm integrate with key stakeholders along the SC, which subsequently helps the firm mass customize. Practitioners should recognize the added importance of SC-planning and SC-integration if they want to mass customize.Originality/valueThis study provides a theoretical foundation for the relationship between SC-integration and MC. It also provides a more comprehensive conceptualization of SC-integration, which includes supplier integration, customer integration, as well as internal functional integration which was neglected in many previous studies.

Styles APA, Harvard, Vancouver, ISO, etc.

27

Liu, Gensheng (Jason), Rachna Shah et Roger G. Schroeder. « Managing demand and supply uncertainties to achieve mass customization ability ». Journal of Manufacturing Technology Management 21, n^o 8 (26 octobre 2010) : 990–1012. http://dx.doi.org/10.1108/17410381011086801.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

28

Jin, Maozhu, Hua Wang, Qian Zhang et Yucheng Zeng. « Supply chain optimization based on chain management and mass customization ». Information Systems and e-Business Management 18, n^o 4 (3 janvier 2019) : 647–64. http://dx.doi.org/10.1007/s10257-018-0389-8.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

29

Lu, Jun-Ming, et Mao-Jiun Wang. « A Computer-aided Production System for Mass Customization in Fashion ». Scientific Journal of Riga Technical University. Computer Sciences 43, n^o 1 (1 janvier 2011) : 104–9. http://dx.doi.org/10.2478/v10143-011-0015-4.

Texte intégral

Résumé :

A Computer-aided Production System for Mass Customization in FashionIn order to meet the demands of the market, a computer-aided production system for mass customization in fashion is proposed. The system enables the automation of dimension collection, pattern generation and fabric cutting. By integrating the system with the processes of garment sewing, fitting test and final adjustment, mass customization can be realized in the apparel industry. For the manufacturers, the efficiency of the supply chain can be improved by reducing human efforts, costs, and production time. For the customers, better fitness with faster delivery stimulates the desire of purchase and enhances their satisfaction.

Styles APA, Harvard, Vancouver, ISO, etc.

30

van Hoek, Remko I. « The Role of Third‐Party Logistics Providers in Mass Customization ». International Journal of Logistics Management 11, n^o 1 (1 janvier 2000) : 37–46. http://dx.doi.org/10.1108/09574090010806056.

Texte intégral

Résumé :

Mass customization is coming to the forefront of international supply chains, contributing to an increasing focus on postponement. Third‐party logistics providers, are targeting postponement applications as an extension of their service portfolios. Findings from a multi‐annual survey (1996‐1999) are presented to generate insights into the supply chain mechanisms service providers can use to develop postponement services. A framework for achieving extension of their activities is then developed.

Styles APA, Harvard, Vancouver, ISO, etc.

31

Sun, Xue Yan, Xing Yu Jiang, Shi Jie Wang et Xin Min Zhang. « A New Method of Product Configuration for Customization System into Supply Chain ». Applied Mechanics and Materials 121-126 (octobre 2011) : 3870–74. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.3870.

Texte intégral

Résumé :

To establish the configuration relations of complex product in the process of customization into supply chain, a new method of product configuration based on polychromatic graph theory was put forward. Then the optimum product structure configuration mathematical model was got and the improved ant colony algorithm was employed to solve the problem. The results showed that the solution quality got by improved ant colony algorithm was better than the solution got by traditional ant colony algorithm, and the product configuration model can exactly present the configuration information, product attribute and assembly relation for complex product. The customization system offers a kind of new way to meet customers’ requirements that the customers are eager for consumption of varieties, small batch production, short cycle and high quality.

Styles APA, Harvard, Vancouver, ISO, etc.

32

Dai, Wei Hui. « Autonomous Intelligent System for Supply Chain Management on Mass Customization Manufacture ». Applied Mechanics and Materials 26-28 (juin 2010) : 686–89. http://dx.doi.org/10.4028/www.scientific.net/amm.26-28.686.

Texte intégral

Résumé :

Due to the intensely increasing competition and rapidly changing demand, Mass Customization(MC) manufacture has been the new trend for modern enterprises to respond quickly to the variational and individual demand in global market. To satisfy the operation of MC manufacture, its supply chain must be effective and flexible enough. Findings of researches and practices have shown that some intelligent activities, such as negotiation, decision and collaboration, have become the “bottleneck” to improve the performance of supply chain. This paper applied the Autonomous Intelligent System(AIS) to deal with the intelligent activities intelligently and automatically, and thereof provided a new method for the Supply Chain Management(SCM) on MC manufacture. First, a new supply chain model based on E-HUB was presented according to the requirements of MC manufacture, and then the structure and operation of AIS were designed to support that SCM. Finally, the development technology of AIS was discussed.

Styles APA, Harvard, Vancouver, ISO, etc.

33

Usonalieva, D. A., A. S. Mamytov et M. A. Myrzalieva. « CUSTOMIZATION OF CONSUMER MARKET FORMATION CONDITIONS ». Heralds of KSUCTA, №1, 2022, n^o 1-2022 (14 mars 2022) : 247–54. http://dx.doi.org/10.35803/1694-5298.2022.1.247-254.

Texte intégral

Résumé :

This article examines the peculiarities and peculiar conditions of the formation of the consumer market in the process of its formation and development. At the initial stage of the transformation period, the consumer market was formed in the context of a widespread shortage of consumer goods and a decline in domestic production. During the transition to an open economy, the shortage of goods was eliminated, not by increasing the supply of domestically produced goods, but by importing foreign-made consumer goods. Domestic producers could not stand the competition and imported goods poured into the domestic market, primarily goods from China. The main reasons hindering the development of the consumer market are formulated and measures are proposed to reduce the factors that negatively affect the consumer market.

Styles APA, Harvard, Vancouver, ISO, etc.

34

Yang, Li, Yan Fang Zhou et Jie Zhou. « Greening the Housing Supply Chain in China ». Advanced Materials Research 472-475 (février 2012) : 3355–58. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.3355.

Texte intégral

Résumé :

Greening housing supply chain is a proactive response to environmental regulation. Customized community planning, LEED for Homes and mass customization housing production are introduced as main strategies of green housing supply chain corresponding to planning, and design and production stages of housing supply. Since environmentally-friendly practices occur more often in customized housing productions, housing buyers with environmental consciousness are playing an increasingly important role in greening the housing supply chain in China.

Styles APA, Harvard, Vancouver, ISO, etc.

35

ZHA, XUAN F., RAM D. SRIRAM et WEN F. LU. « Evaluation and selection in product design for mass customization : A knowledge decision support approach ». Artificial Intelligence for Engineering Design, Analysis and Manufacturing 18, n^o 1 (février 2004) : 87–109. http://dx.doi.org/10.1017/s0890060404040077.

Texte intégral

Résumé :

Mass customization has been identified as a competitive strategy by an increasing number of companies. Family-based product design is an efficient and effective means to realize sufficient product variety, while satisfying a range of customer demands in support for mass customization. This paper presents a knowledge decision support approach to product family design evaluation and selection for mass customization process. Here, product family design is viewed as a selection problem with the following stages: product family (design alternatives) generation, product family design evaluation, and selection for customization. The fundamental issues underlying product family design for mass customization are discussed. Then, a knowledge support framework and its relevant technologies are developed for module-based product family design for mass customization. A systematic fuzzy clustering and ranking model is proposed and discussed in detail. This model supports the imprecision inherent in decision making with fuzzy customers' preference relations and uses fuzzy analysis techniques for evaluation and selection. A neural network technique is also adopted to adjust the membership function to enhance the model. The focus of this paper is on the development of a knowledge-intensive support scheme and a comprehensive systematic fuzzy clustering and ranking methodology for product family design evaluation and selection. A case study and the scenario of knowledge support for power supply family evaluation, selection, and customization are provided for illustration.

Styles APA, Harvard, Vancouver, ISO, etc.

36

Liu, Weihua, Xuan Zhao et Runze Wu. « Revenue-Sharing Contract Models for Logistics Service Supply Chains with Mass Customization Service ». Mathematical Problems in Engineering 2015 (2015) : 1–21. http://dx.doi.org/10.1155/2015/572624.

Texte intégral

Résumé :

The revenue-sharing contract is one of the most important supply chain coordination contracts; it has been applied in various supply chains. However, studies related to service supply chains with mass customization (MC) are lacking. Considering the equity of benefit distribution between the members of service supply chains, in this paper, we designed two revenue-sharing contracts. The first contract for the maximum equity of a single logistics service integrator (LSI) and single functional logistics service provider (FLSP) in a two-echelon logistics service supply chain was designed by introducing the fair entropy function (“one to one” model). Furthermore, the method is extended to a more complex supply chain, which consists of a single LSI and multiple FLSPs. A new contract was designed not only for considering the equity of an LSI and each FLSP but also for the equity between each FLSP (“one toN” model). The “one to one” model in three-echelon LSSC is also provided. The result exemplifies that, whether in the “one to one” model or “one toN” model, there exists a best interval of customized level when the revenue-sharing coefficient reaches its maximum.

Styles APA, Harvard, Vancouver, ISO, etc.

37

Pang, Ru Ying, Da Cheng Liu et Qiang Li. « Online Due Date Strategy on Mass Customization ». Advanced Materials Research 201-203 (février 2011) : 1135–40. http://dx.doi.org/10.4028/www.scientific.net/amr.201-203.1135.

Texte intégral

Résumé :

In order to make response rapidly for customization demand and reduce the cost, this paper studied the due date strategies between MTS stage and MTO stage of mass customization supply chain. We consider the sequencing and due date of a series of orders that arrive at MTO stage over time. Using of queuing theory, the paper puts forward SPTA-DE algorithm which is the on-line heuristic algorithm of orders scheduling and due date quotation. And, the paper make comparative analyses on the due date and cost for the SPTA- DE heuristic algorithm and FCFS algorithm under the various control parameters, and draws constructive conclusions.

Styles APA, Harvard, Vancouver, ISO, etc.

38

Benbouja, Mouad, Achraf Touil, Abdelwahed Echchatbi et Abdelkabir Charkaoui. « Supply chain integration within mass customization : Tactical procurement, production and distribution modeling ». Journal of Industrial Engineering and Management 14, n^o 2 (11 février 2021) : 250. http://dx.doi.org/10.3926/jiem.3182.

Texte intégral

Résumé :

Purpose: The actual market characteristic oriented toward customers’ requirements compels decision-makers to foresee customization abilities. Mass customization represents a valuable approach to combine customizable offers with mass production processes. From a supply chain standpoint, this paper attempts to develop an integrated procurement, production and distribution modeling to describe the generated framework structure formulation within tactical decision planning level.Design/methodology/approach: The paper provides a mixed integer linear programming model of a three echelon supply chain illustrated from the automotive industry with (a) customers: Original Equipment Manufacturers (OEMs) identified as leaders and (b) first-tier supplier: wiring harnesses manufacturer (c) second-tier supplier: raw material supplier, identified as followers. The model formulation is depicted through dyadic relationships between stakeholders considering the specific operation enablers of the environment such as make to order, modular approach in addition to the corresponding inventory management policy.Findings: The integrated model is solved by an exact method which illustrates the feasibility of the formulation in addition to the observance of the applied constraints. A sensitivity analysis is performed to highlight the interdependency across some key parameters to provide managerial insights within the studied framework while keeping the optimal solvability of the model.Research limitations/implications: The limitation of this study is the computational experiment study. An extensive experiment with a real-word case will outline the optimal solvability status of the exact method and the necessity for a performance benchmark through the approximate solving approaches.Originality/value: The present research aims to contribute as first studies toward mathematical modeling for supply chain decision planning endeavor operating within mass customization business model.

Styles APA, Harvard, Vancouver, ISO, etc.

39

Yao, Jianming. « Dynamic game decision about supply chain resource integration in mass customization ». Journal of Intelligent & ; Fuzzy Systems 28, n^o 5 (23 juin 2015) : 2083–93. http://dx.doi.org/10.3233/ifs-141488.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

40

Coronado, A. E., A. C. Lyons, D. F. Kehoe et J. Coleman. « Enabling mass customization : extending build-to-order concepts to supply chains ». Production Planning & ; Control 15, n^o 4 (juin 2004) : 398–411. http://dx.doi.org/10.1080/0953728042000238809.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

41

Hsuan Mikkola, Juliana, et Tage Skjøtt-Larsen. « Supply-chain integration : implications for mass customization, modularization and postponement strategies ». Production Planning & ; Control 15, n^o 4 (juin 2004) : 352–61. http://dx.doi.org/10.1080/0953728042000238845.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

42

Hong, Paul C., David D. Dobrzykowski et Mark A. Vonderembse. « Integration of supply chain IT and lean practices for mass customization ». Benchmarking : An International Journal 17, n^o 4 (13 juillet 2010) : 561–92. http://dx.doi.org/10.1108/14635771011060594.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

43

Zhang, Min, Hangfei Guo, Baofeng Huo, Xiande Zhao et Jianbo Huang. « Linking supply chain quality integration with mass customization and product modularity ». International Journal of Production Economics 207 (janvier 2019) : 227–35. http://dx.doi.org/10.1016/j.ijpe.2017.01.011.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

44

Lin, Xudong, Lijun Ma et Zunxin Zheng. « Customized Transportation, Equity Participation, and Cooperation Performance within Logistics Supply Chains ». Mathematical Problems in Engineering 2015 (2015) : 1–9. http://dx.doi.org/10.1155/2015/792792.

Texte intégral

Résumé :

Customized transportation has received growing concerns by researchers and practitioners in recent years. Despite the fact that one consignor often holds partial ownership of its carrier within a supply chain, the existing interpretations behind them remain relatively unexplored. Based on the game models, we find that a simple take-or-pay contract is not likely to solve the low-efficient customized production problem, and equity participation mechanism plus simple contract may improve the cooperation performance of customized transportation. In the case of the owner-managed carrier, only when purchasing at par can it be ensured to obtain the socially optimal customization investment, but when purchasing at premium or discount, the optimal partial ownership selected by consignor cannot motivate the carrier to make the most efficient customization investment. With the optimal solutions, we also provide a theoretic foundation for calculating the optimal partial ownership and for interpreting why the interfirm share-holding ratios of the member-firms within the familial-type logistic supply chains are much larger than the ratios within the public-type logistic supply chains. Finally, our results show that the familial-type logistic supply chains may choose more efficient customized production level than public-type logistic supply chains.

Styles APA, Harvard, Vancouver, ISO, etc.

45

Anderson, David M. « Mass Customization's Missing Link ». Mechanical Engineering 133, n^o 04 (1 avril 2011) : 32–35. http://dx.doi.org/10.1115/1.2011-apr-2.

Texte intégral

Résumé :

This article focuses on the missing link in mass customization. Mass customization has not really caught on yet because of a missing link—knowing how to actually design and build mass-customized products. The solution is concurrently engineering product families and flexible processes so any product variation within a family can be built on-demand using common parts that are always available. Accomplishing this requires some new and different strategies: production strategy, supply chain strategy, design strategy, and marketing strategy. The production strategy aims to build any variation in a product family on demand economically, which requires versatile flexible processes without expensive setup charges or delays. Supply chain strategy assures that all parts, modules, and materials must be always nearby and spontaneously resupplied by using some specific techniques. Design strategy concurrently engineers the design of the product families and their flexible processes to build customized products on-demand from common parts and materials. Marketing strategy identifies product families that have a need for mass-customized products and can be economically built on demand.

Styles APA, Harvard, Vancouver, ISO, etc.

46

Zhao, Jing Hua, et Jie Lin. « Expert System Aided Multi-Agent Intelligent Ant Colony Optimization System ». Applied Mechanics and Materials 121-126 (octobre 2011) : 2021–25. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.2021.

Texte intégral

Résumé :

In the dynamic production environment of supply chain, based on information sharing among enterprises of supply chain, this paper designs an expert system aided multi-agent intelligent ant colony algorithm system to solve the production scheduling optimization model. Where ant colony is constructed with multi-agent and the order decomposition structure and constraint are expressed by expert system. And then it builds a system using JESS and JADE to confirm this algorithm applied in a mass customization supply chain scheduling model

Styles APA, Harvard, Vancouver, ISO, etc.

47

Chauhan, Ruchi, Varun Kumar, Tapas Kumar Jana et Arunava Majumder. « A Modified Customization Strategy in a Dual-Channel Supply Chain Model with Price-Sensitive Stochastic Demand and Distribution-Free Approach ». Mathematical Problems in Engineering 2021 (22 septembre 2021) : 1–25. http://dx.doi.org/10.1155/2021/5549882.

Texte intégral

Résumé :

With the advancement of technology, many companies provide customization facilities to customers. This facility provides a vast variety to customers which enhances the level of customer satisfaction. This approach helps various technologically advanced companies to increase their profit. In this paper, a dual-channel supply chain model is developed with the aforementioned customization strategy with the target of increasing the profit of the firm. In dual-channel, the core or standard product is provided to the customer through a traditional retail channel, whereas the customized product is made available through the online channel. This article incorporates a modification in the existing dual-channel policy on the number of customers that switch between the offline and online channels. Moreover, a preassigned threshold value is also assumed which signifies the decrease in demand that takes place if the difference between the selling price of offline and online channels crosses a fixed specified threshold value. In addition to that, due to fluctuation and uncertainty of demand, both variability and randomness may occur simultaneously. Thus, the price-sensitive stochastic demand is considered to develop the dual-channel centralized supply chain model with customization. A max-min distribution-free approach is applied to deal with the randomness and variability of demand. The model is analyzed and validated with numerical experiments and graphical analysis. Consequently, the article concluded that it is better to adopt a dual-channel supply chain policy for better profitability than the traditional single-channel supply chain as this firm will be able to provide customized products to customers. Moreover, if the difference between the selling prices of the offline and online channels is greater than the preassigned threshold value, then the shifting of customers takes place depending upon the factor that which channel’s selling is less in comparison to another.

Styles APA, Harvard, Vancouver, ISO, etc.

48

van Hoek, Remko I. « The role of transportation in customized supply chains ». Journal of Transportation Management 11, n^o 1 (1 avril 1999) : 50–64. http://dx.doi.org/10.22237/jotm/922925100.

Texte intégral

Résumé :

This paper empirically explores the role of transportation in creating a customized supply chain using postponement. Based on a survey among manufacturers in three countries, it was found that a reconfiguration is needed for the creation of a customized supply chain. In this reconfiguration process, transportation considerations are extremely important, resulting in supply chains and distribution channels that are globalized and reliant on international transport. Postponement is increasingly applied in both manufacturing and distribution. Thus, through the facilitation of postponement and customization activities in the distribution channel, much business is to be gained for transportation and logistics companies.

Styles APA, Harvard, Vancouver, ISO, etc.

49

Szoda, Natalia. « Product customization in the contemporary supply chains – trends, strategies, examples of application ». Scientific Papers of Silesian University of Technology. Organization and Management Series 2018, n^o 132 (2018) : 537–50. http://dx.doi.org/10.29119/1641-3466.2018.132.39.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

50

Klein, Richard. « Customization and real time information access in integrated eBusiness supply chain relationships ». Journal of Operations Management 25, n^o 6 (7 mars 2007) : 1366–81. http://dx.doi.org/10.1016/j.jom.2007.03.001.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Articles de revues sur le sujet « Supply customization »

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres