Bibliographies thématiques / Stripline fed tapered slot antenna

Littérature scientifique sur le sujet « Stripline fed tapered slot antenna »

Auteur : Grafiati
Publié le 6 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Stripline fed tapered slot antenna ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Stripline fed tapered slot antenna"

1

Schaubert, D. H., J. A. Aas, M. E. Cooley et N. E. Buris. « Moment method analysis of infinite stripline-fed tapered slot antenna arrays with a ground plane ». IEEE Transactions on Antennas and Propagation 42, no 8 (1994) : 1161–66. http://dx.doi.org/10.1109/8.310008.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Nalumakkal, Priya Suresh, K. Maheshwara Reddy, K. J. Vinoy et Saurabh Shukla. « Wideband stripline fed tapered slot antenna with integral coupler for wide scan angle active phased array ». IET Microwaves, Antennas & ; Propagation 12, no 9 (4 avril 2018) : 1487–93. http://dx.doi.org/10.1049/iet-map.2017.0784.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Kim, Jung-Min, Kun-Wook Kim, Jong-Gwan Yook et Han-Kyu Park. « Compact stripline-fed meander slot antenna ». Electronics Letters 37, no 16 (2001) : 995. http://dx.doi.org/10.1049/el:20010667.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Knott, P., et A. Bell. « Coaxially-fed tapered slot antenna ». Electronics Letters 37, no 18 (2001) : 1103. http://dx.doi.org/10.1049/el:20010761.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Yao, Yuan, Wenhua Chen, Bin Huang et Zhenghe Feng. « Novel planar tapered‐slot‐fed UWB antenna ». Microwave and Optical Technology Letters 50, no 9 (septembre 2008) : 2280–83. http://dx.doi.org/10.1002/mop.23657.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Sangster, A. J., P. Smith, E. McErlean, K. Sinclair et R. Jacobs. « Dual-polarised stripline fed slot antenna incorporating signal cancellation ». IEE Proceedings - Microwaves, Antennas and Propagation 148, no 6 (2001) : 357. http://dx.doi.org/10.1049/ip-map:20010768.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Woo, Dong Sik, Kang Wook Kim et Hyun-Chul Choi. « A Broadband and High Gain Tapered Slot Antenna for W-Band Imaging Array Applications ». International Journal of Antennas and Propagation 2014 (2014) : 1–6. http://dx.doi.org/10.1155/2014/378527.

Texte intégral
Résumé :
A broadband and high gain tapered slot antenna (TSA) by utilizing a broadband microstrip- (MS-) to-coplanar stripline (CPS) balun has been developed for millimeter-wave imaging systems and sensors. This antenna exhibits ultrawideband performance for frequency ranges from 70 to over 110 GHz with the high antenna gain, low sidelobe levels, and narrow beamwidth. The validity of this antenna as imaging arrays is also demonstrated by analyzing mutual couplings and 4-element linear array. This antenna can be applied to mm-wave phased array, imaging array for plasma diagnostics applications.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Meena, R., et A. R. Harish. « Parasitically Loaded Wideband CPW-Fed Tapered Slot Antenna ». Journal of Electromagnetic Waves and Applications 25, no 17-18 (janvier 2011) : 2399–408. http://dx.doi.org/10.1163/156939311798806167.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Lazaro, M. A. P., et R. Judaschke. « A 150-GHz CPW-fed tapered-slot antenna ». IEEE Microwave and Wireless Components Letters 14, no 2 (février 2004) : 62–64. http://dx.doi.org/10.1109/lmwc.2003.822572.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Löcker, C., T. Vaupel et T. F. Eibert. « Radiation Efficient Unidirectional Low-Profile Slot Antenna Elements for X-Band Application ». Advances in Radio Science 3 (12 mai 2005) : 143–46. http://dx.doi.org/10.5194/ars-3-143-2005.

Texte intégral
Résumé :
Abstract. Slots in metallic ground planes are very promising candidates for conformal antenna applications. However, a low-profile unidirectional antenna requires a back reflector close to the slot and the resulting stripline feed causes strong excitation of parallel-plate modes. In this contribution, we consider unidirectional reflector-backed slot configurations with parallel-plate mode suppression by shorting pins. Starting from a parametric study with respect to shorting pin location and back reflector distance, we present a stripline-fed rectangular slot element with radiation efficiency of more than 80% and a bandwidth of about 5% at centre frequency 10GHz. A careful optimisation of shorting pin locations guarantees reliable parallel-plate mode suppression without deteriorating the slot radiation behaviour. Coupling coefficients between parallel and aligned rectangular slot elements are presented. For increased bandwidth applications, a bow-tie slot element with about 8% bandwidth and radiation efficiency of close to 80% is proposed.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Stripline fed tapered slot antenna"

1

Smith, Peter. « Moment method analysis of microstrip/stripline fed slot radiators including polarisation agility ». Thesis, Heriot-Watt University, 1995. http://hdl.handle.net/10399/744.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Nalumakkal, Priya Suresh. « Ultrawideband and wide-angle scan antenna element and small active phased arrays ». Thesis, 2023. https://etd.iisc.ac.in/handle/2005/6157.

Texte intégral
Résumé :
Wideband, wide-scan active phased arrays (APA) are widely used for multi-function radars, communication and electronic warfare. Although considerable research is available on the design and analysis of such antenna elements and arrays with large aperture, multi-octave wide scan phased antenna arrays with an electronically small aperture finds major application in electronic warfare (EW), is not well-developed. Based on a detailed literature survey on ultrawideband antenna for the wideband APA this research began with investigating different designs of tapered slot antenna (TSA) elements. A study of the performance parameters like bandwidth, beamwidth, cross-polarization and beam-squint have been conducted for candidate antenna elements such as microstrip fed TSA, balanced antipodal TSA and stripline fed TSA (STSA). Based on these studies, STSA was selected as the most suitable candidate for meeting the requirement for antenna element. An STSA element with a wide beamwidth of 120° in H-plane with reflection coefficient less than -10 dB is designed. Two different antenna arrays are proposed in this research to demonstrate the advantages of STAS as small aperture active array element for wideband phased arrays. Challenges in the design, analysis and characterization of moderately sized phased arrays using STSA element have been analyzed. Although seof interest in literature, of these a linear active phased array antenna that operates across 6 to 18 GHz frequency range, an array with wide-scan coverage of ±60° in H-plane is not developed. The element pattern in phased arrays causes a squint in the main beam away from broadside. For small phased arrays this can be reduced by on-line calibration by taking a sample of signal at each element of the array. Therefore STSA is integrated with a -20 dB asymmetrical coupler at the feed for calibration and performance monitoring. In addition, the proposed STSA with integrated coupler is designed to have a wideband transition which allows a direct 50 Ω stripline feed. The isolated port of the coupler is internally terminated with a resistor using Ohmegaply resistive layer to improve reliability in airborne platform. A linear array of 16 elements is designed and experimentally demonstrated. The main figure of merit of the array is realised gain of the array over the scan angle. A minimum element gain of 0 dB in array environment is obtained over the scan angle of ±60°, without any grating lobes at high frequency. It also demonstrated a cross-polarization of better than -25 dB at boresight and beam squint less than 1°. A staggered feeding arrangement is incorporated to accommodate the physical dimensions of connectors for minimum inter element spacing. Conventionally the centre element pattern in array environment is used for obtaining the scanning characteristics of a large phased array. But, for small phased array, since the edge effects may be significant an average scan element pattern is proposed for array characterization. This gives an accurate result for the scan characteristics of array and can be used to correct array synthesis before full scale fabrication. This approach is validated by measuring the array pattern of the fabricated array with transmit/receive module. Second, an 8 element E-plane array operating over 1 to 6 GHz frequency range is proposed with scanning of 45° from broadside. This antenna covers D, E, F and G bands of EW system. A novel STSA has been investigated across this bandwidth. Here the radiating part of tapered slot antenna is ended with an elliptical stub instead of circular stub which gives the same performance that of circular stub with reduced overlap with the radial stripline stub. A compact broadband Wilkinson power divider feed network is designed along with array to characterise this. These edge effects are more severe in this array, especially at the low frequency of the operation band and methods to overcome this are investigated. Approaches of additional dummy edge elements or modifying edge elements have been investigated by simulations to reduce edge effects. An approach of adding 3D caps at the edges has been found to be more effective in this regard. To summarize, methods for designing high performance multi-octave stripline fed tapered slot antenna elements and their arrays in the E- and H-plane have been developed using simulations and validated by experiments. These antennas are particularly suited as small aperture arrays in EW applications.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Chu, Ching Chieh, et 朱靖傑. « Tapered Slot CPW-fed UWB Antenna ». Thesis, 2008. http://ndltd.ncl.edu.tw/handle/82969467252143100575.

Texte intégral
Résumé :
碩士
長庚大學
電機工程學研究所
96
In this thesis two novel coplanar waveguide (CPW) ultra wideband (UWB) antennas fabricated on FR4 printed circuit board (PCB) are presented. The one is using tapered slot with compact size 43mm×20.8mm to achieve a large impedance bandwidth. Moreover, two different slots in the ground plane can improve the impedance match and obtain the better response at low frequency band to match the FCC regulation. Experimental results show that the return loss of the proposed antenna is lower than – 10 dB from 2.67 to 14.15GHz and the impedance bandwidth is 136.5%. The radiation patterns within this range are also measured. The other is the oval-shaped monopole antenna with compact size 52mm× 49mm, which is using the rectangular ground plane with an oblique angle under the radiating body to achieve a large impedance bandwidth. The operating frequency of the proposed antenna ranges from 3.28 to 11.88 GHz and the impedance bandwidth is 113 %. Moreover, an elaborate time domain study of the antenna is emphatically addressed by an impulse train signal generated from an optical system. Experimental results show that two monopole UWB antennas demonstrate a good performance in time domain.
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Stripline fed tapered slot antenna"

1

Li, P., J. Liang et X. Chen. « UWB tapered-slot-fed antenna ». Dans IET Seminar on Ultra Wideband Systems, Technologies and Applications. IEE, 2006. http://dx.doi.org/10.1049/ic:20060516.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Xuyang Li, M. Jalilvand, T. Zwick, W. Wiesbeck et W. You. « An Implantable Stripline-Fed Slot Antenna for Biomedical Applications ». Dans IET International Radar Conference 2013. Institution of Engineering and Technology, 2013. http://dx.doi.org/10.1049/cp.2013.0446.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Guoquan Zhang, Liming Xu, Aixin Chen et Donglin Su. « A microstrip-fed wide-band tapered slot antenna ». Dans 2008 International Conference on Microwave and Millimeter Wave Technology (ICMMT). IEEE, 2008. http://dx.doi.org/10.1109/icmmt.2008.4540782.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Nguyen, Cam. « Ultrawideband coplanar waveguide-fed tapered slot line antenna ». Dans SPIE's 1995 International Symposium on Optical Science, Engineering, and Instrumentation, sous la direction de Mohammed N. Afsar. SPIE, 1995. http://dx.doi.org/10.1117/12.224220.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Zhang, Peng, et Wen-Xun Zhang. « A bilateral tapered slot-line antenna fed by CPW ». Dans 2010 IEEE International Conference on Ultra-Wideband (ICUWB). IEEE, 2010. http://dx.doi.org/10.1109/icuwb.2010.5615738.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Pengcheng Li, Jianxin Liang, Xiaodong Chen et C. Parini. « A 4-Element Ultra-wideband Tapered-Slot-Fed Antenna Array ». Dans 2006 IEEE Antennas and Propagation Society International Symposium. IEEE, 2006. http://dx.doi.org/10.1109/aps.2006.1711629.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Miao, Si Yu, et Feng Han Lin. « Design of A 400-Element Reflectarray Antenna Fed by Tapered Slot Antenna ». Dans 2022 International Applied Computational Electromagnetics Society Symposium (ACES-China). IEEE, 2022. http://dx.doi.org/10.1109/aces-china56081.2022.10064723.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Yan, Zhong-Min, et Yun-Sheng Xu. « Design and measurement of a differential fed tapered slot UWB antenna ». Dans 2016 CIE International Conference on Radar (RADAR). IEEE, 2016. http://dx.doi.org/10.1109/radar.2016.8059424.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Ranade, Sulabha, Arijit Majumder et Sayan Chatterjee. « Corrugated substrate integrated waveguide fed broadband Tapered Slot Antenna at Ku band ». Dans 2015 IEEE Applied Electromagnetics Conference (AEMC). IEEE, 2015. http://dx.doi.org/10.1109/aemc.2015.7509225.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Aleef, Tajwar Abrar, et Akash Biswas. « Design and measurement of a flexible implantable stripline-fed slot antenna for biomedical applications ». Dans 2016 3rd International Conference on Electrical Engineering and Information Communication Technology (ICEEICT). IEEE, 2016. http://dx.doi.org/10.1109/ceeict.2016.7873097.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Stripline fed tapered slot antenna » pour d’autres types de sources :
Articles de revues
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie