Littérature scientifique sur le sujet « Strength anisotropy »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Strength anisotropy ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Strength anisotropy"
Guo, Songfeng, Shengwen Qi, Bowen Zheng, Lei Xue, Xueliang Wang, Ning Liang, Yu Zou et al. « The Confinement-Affected Strength Variety of Anisotropic Rock Mass ». Materials 15, no 23 (27 novembre 2022) : 8444. http://dx.doi.org/10.3390/ma15238444.
Texte intégralReid, D., R. Fanni et A. Fourie. « Assessing the undrained strength cross-anisotropy of three tailings types ». Géotechnique Letters 12, no 1 (mars 2022) : 1–7. http://dx.doi.org/10.1680/jgele.21.00094.
Texte intégralCheng, Jingyi, Zhijun Wan, Yidong Zhang, Wenfeng Li, Syd S. Peng et Peng Zhang. « Experimental Study on Anisotropic Strength and Deformation Behavior of a Coal Measure Shale under Room Dried and Water Saturated Conditions ». Shock and Vibration 2015 (2015) : 1–13. http://dx.doi.org/10.1155/2015/290293.
Texte intégralLai, Van Qui, Jim Shiau, Suraparb Keawsawasvong, Sorawit Seehavong et Lowell Tan Cabangon. « Undrained Stability of Unsupported Rectangular Excavations : Anisotropy and Non-Homogeneity in 3D ». Buildings 12, no 9 (10 septembre 2022) : 1425. http://dx.doi.org/10.3390/buildings12091425.
Texte intégralJena, Pradipta Kumar, K. Siva Kumar et A. K. Singh. « Effect of Tempering Temperature on Microstructure, Texture and Mechanical Properties of a High Strength Steel ». International Journal of Manufacturing, Materials, and Mechanical Engineering 4, no 3 (juillet 2014) : 33–49. http://dx.doi.org/10.4018/ijmmme.2014070102.
Texte intégralLee, K. M., et R. K. Rowe. « Effects of undrained strength anisotropy on surface subsidences induced by the construction of shallow tunnels ». Canadian Geotechnical Journal 26, no 2 (1 mai 1989) : 279–91. http://dx.doi.org/10.1139/t89-037.
Texte intégralSeki, Hironori, Masakazu Tane et Hideo Nakajima. « Fatigue Strength of Lotus-Type Porous Magnesium ». Materials Science Forum 561-565 (octobre 2007) : 1681–84. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.1681.
Texte intégralWatson, Julian Matthew, Abouzar Vakili et Mateusz Jakubowski. « Rock Strength Anisotropy in High Stress Conditions : A Case Study for Application to Shaft Stability Assessments ». Studia Geotechnica et Mechanica 37, no 1 (1 mars 2015) : 115–25. http://dx.doi.org/10.1515/sgem-2015-0013.
Texte intégralZapata-Medina, David G., Leon D. Cortes-Garcia, Richard J. Finno et Luis G. Arboleda-Monsalve. « Stiffness and strength anisotropy of overconsolidated Bootlegger Cove clays ». Canadian Geotechnical Journal 57, no 11 (novembre 2020) : 1652–63. http://dx.doi.org/10.1139/cgj-2019-0068.
Texte intégralShesterikov, S. A., A. M. Lokochtchenko et E. A. Mjakotin. « Creep Rupture of Anisotropic Pipes ». Journal of Pressure Vessel Technology 120, no 3 (1 août 1998) : 223–25. http://dx.doi.org/10.1115/1.2842049.
Texte intégralThèses sur le sujet "Strength anisotropy"
O'Neill, Deirdre A. (Deirdre Anne). « Undrained strength anisotropy of an overconsolidated thixotropic clay ». Thesis, Massachusetts Institute of Technology, 1987. http://hdl.handle.net/1721.1/14634.
Texte intégralDenli, Alper Kaan. « Effect Of Discontinuity Roughness And Anisotropy On Shear Strength ». Master's thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/2/12604948/index.pdf.
Texte intégralModén, Carl. « Transverse anisotropy in softwoods : modelling and experiments / ». Stockholm, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3988.
Texte intégralTong, Chong-Sze. « Anisotropy in repulsion and dispersion forces between atoms in molecules ». Thesis, University of Cambridge, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.278386.
Texte intégralCatapano, Anita. « Stiffness and strength optimisation of the anisotropy distribution for laminated structures ». Paris 6, 2013. http://www.theses.fr/2013PA066062.
Texte intégralIn this thesis we deal with the problem of determining the best distribution of the anisotropy for a laminated structure that has to be simultaneously the stiffest and the strongest one. The work has been divided into three main parts. In the first part we presented all the concepts and tools that we have used to develop the research. In the second part we have proposed a tensor invariant formulation, through the polar method, of different polynomial failure criteria for orthotropic sheets. Then, we considered the problem of determining the optimal material orientation to maximise strength by the minimisation of the failure index. The last part of the thesis is dedicated to the development of a new strategy to optimise simultaneously the stiffness and strength of a laminated structure. Our approach is inspired from an already existing hierarchical strategy for the only stiffness maximisation. First of all we defined a new laminate level failure criterion valid for an equivalent homogenised plate. Then, conscious of having two functional, the complementary energy and the laminate failure index, to be minimised at the same time, we proved that the first step of the strategy can be stated as two problems characterised by two functional that are sequentially minimised, preserving only the orthotropy direction. In the first step of the strategy we developed three different algorithms to determine the optimal distribution of material parameters for a given structure. Finally we dealt with the problem of determining the laminate stacking sequence satisfying the optimal distribution of material parameters issued from the first step of the hierarchical strategy
Wang, Wenhai Zavaliangos Antonios. « Towards an improved understanding of strength and anisotropy of cold compacted powder / ». Philadelphia, Pa. : Drexel University, 2007. http://hdl.handle.net/1860/1865.
Texte intégralGalen, Steven Zavaliangos Antonios. « Path dependence and strength anisotropy of mechanical behavior in cold-compacted powders / ». Philadelphia, Pa. : Drexel University, 2005. http://dspace.library.drexel.edu/handle/1860/438.
Texte intégralZdravkovic, Lidija. « The stress-strain-strength anisotropy of a granular medium under general stress conditions ». Thesis, Imperial College London, 1996. http://hdl.handle.net/10044/1/8919.
Texte intégralHo, Man Lee. « Theoretical approach to quantify influence of inherent anisotropy on undrained steady state strength of sand / ». View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?CIVL%202005%20HO.
Texte intégralKurauchi, Martim Hideki Nakayama. « Uma abordagem de ensaio de resistência mecânica de carvão vegetal ». Universidade de São Paulo, 2014. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-28042015-110831/.
Texte intégralThe iron- and steel industry is responsible for about 8% of the total global CO2 emissions. Charcoal is an existing alternative to the use of coal and coke in the metallurgical industry and is used in some blast furnaces in Brazil. Although it has some advantages against coke in terms of higher reactivity and lower ash contents, charcoal has inherently low mechanical strength and high friability, imposing difficulties to its transportation, handling and use in processes. There are no standards to evaluate charcoal compression strength, and the existing methods used in other researches consist in using prepared specimens and compressing them in the direction of the fibres. As charcoal is irregular shaped, granular and anisotropic, these tests may not reveal the behaviour of a charcoal bed, as a whole, when undergoing compressive loads. This may not relate to industrial conditions, where the load on charcoal is not exclusively applied on the direction of the fibres, but is randomly applied instead. This dissertation proposes an approach to quantify the effects of applying load on randomly distributed bulk charcoal. This represents an attempt of simulating conditions similar to what is expected in the industrial practice, such as in a blast furnace, rather than analysing individual pieces of charcoal. An apparatus has been prepared consisting of a tube and a piston that is pushed by an universal test machine. The experiments consist in carrying out repeated tests of compression of controlled sized charcoal with the apparatus. A particle size distribution is obtained as a function of the applied load, which is then classified by screening and weighing. Based on that, the particle size distribution is analysed both qualitative and quantitatively by using statistical tools. By means of the friability and survivability indexes, the method generates reproducible results with a sufficient number of repeats. In this way, it is possible to predict the behaviour of charcoal bulk under compression.
Livres sur le sujet "Strength anisotropy"
Ambart͡sumi͡an, S. A. Theory of anisotropic plates : Strength, stability, and vibrations. Sous la direction de Kunin I. A. 1924-. 2e éd. New York : Hemisphere Pub. Corp., 1991.
Trouver le texte intégralJean-Paul, Boehler, International Union of Theoretical and Applied Mechanics. et International Congress on Mechanical Behaviour of Materials., dir. Yielding, damage, and failure of anisotropic solids : Proceedings of the IUTAM/ICM Symposium Antoni Sawczuk in Memoriam, Villard-de-Lans, 24-28 August 1987. London : Mechanical Engineering Publications, 1990.
Trouver le texte intégralTheocaris, Pericles S. On a general theory of failure for the anisotropic matter. Athēnai : Grapheion Dēmosieumatōn tēs Akadēmias Athēnōn, 1997.
Trouver le texte intégralGürdal, Zafer. A compressive failure model for anisotropic plates with a cutout under compressive and shear loads : Final technical report. [Washington, DC : National Aeronautics and Space Administration, 1985.
Trouver le texte intégralEUROMECH-MECAMAT '2002 (2002 Liège, Belgium). 6th European Mechanics of Materials Conference on Non-Linear Mechanics of Anisotropic Materials : EUROMECH-MECAMAT'2002 : EMMC6 : Liège, Belgium, 9-12 September, 2002. Les Ulis, France : EDP Sciences, 2003.
Trouver le texte intégralYielding, Damage, and Failure of Anisotropic Solids (EGF Publication 5) (Egf Publication). Wiley, 2005.
Trouver le texte intégralDetermination of residual stress in composite materials using ultrasonic waves : NASA contract # NAG3-1716. [Washington, DC : National Aeronautics and Space Administration, 1997.
Trouver le texte intégralChapitres de livres sur le sujet "Strength anisotropy"
Jiang, Hao, Wu Liu, Jin Cheng, Huayan Yao, Renjie Li et Jinhang Shang. « Numerical Analysis of Large-Diameter Shield Tunneling Disturbance Considering Stratum Strength Anisotropy ». Dans Lecture Notes in Civil Engineering, 500–513. Singapore : Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5814-2_45.
Texte intégralToribio, Jesús, Beatriz González et Juan-Carlos Matos. « Strength Anisotropy in Prestressing Steel Wires ». Dans Materials with Complex Behaviour II, 259–70. Berlin, Heidelberg : Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-22700-4_15.
Texte intégralNISHIMURA, S., R. J. JARDINE et N. A. MINH. « Shear strength anisotropy of natural London Clay ». Dans Stiff Sedimentary Clays, 97–110. London : Thomas Telford Ltd, 2011. http://dx.doi.org/10.1680/ssc.41080.0009.
Texte intégralGuessab, B., et S. Turgeman. « Generalized Yield Strength Criteria for Bar Structures ». Dans Anisotropy and Localization of Plastic Deformation, 611–14. Dordrecht : Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3644-0_142.
Texte intégralKuwazuru, Osamu, et Nobuhiro Yoshikawa. « Strength Anisotropy Estimation of Plain-Weave Fabrics by Pseudo-Continuum Model ». Dans Fracture and Strength of Solids VI, 835–40. Stafa : Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-989-x.835.
Texte intégralUstinov, K. B. « Inelastic Deformation of Rocks with Deformation and Strength Anisotropy ». Dans Springer Proceedings in Earth and Environmental Sciences, 487–94. Cham : Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-25962-3_48.
Texte intégralHuang, Zhi Gao, Heng Lai, Jian Min Zhang, Jia Xin Li, Feng Ming Zhang et You Wei Du. « The Influences of Size and Anisotropy Strength on Hysteresis Scaling for Anisotropy Heisenberg Multilayer Films ». Dans Solid State Phenomena, 1085–88. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/3-908451-30-2.1085.
Texte intégralImseeh, Wadi H., Khalid A. Alshibli, Peter Kenesei et Hemant Sharma. « Influence of Crystalline Structure on Strength Anisotropy of Silica Sand ». Dans Springer Series in Geomechanics and Geoengineering, 87–98. Cham : Springer Nature Switzerland, 2022. http://dx.doi.org/10.1007/978-3-031-22213-9_10.
Texte intégralMochizuki, A., A. Zh Zhussupbekov, Y. Zharkenov et S. Akhazhanov. « Strength ellipses of induced anisotropy for a compacted sandy material ». Dans Smart Geotechnics for Smart Societies, 291–99. London : CRC Press, 2023. http://dx.doi.org/10.1201/9781003299127-25.
Texte intégralYolcu, Cem, Magnus Herberthson, Carl-Fredrik Westin et Evren Özarslan. « Magnetic Resonance Assessment of Effective Confinement Anisotropy with Orientationally-Averaged Single and Double Diffusion Encoding ». Dans Mathematics and Visualization, 203–23. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-56215-1_10.
Texte intégralActes de conférences sur le sujet "Strength anisotropy"
Krein, Ronny, et Vadym Sushko. « Wire Arc Additive Manufacturing of Creep Strength Enhanced Ferritic Steels and Nickel Alloys ». Dans AM-EPRI 2024, 495–506. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.am-epri-2024p0495.
Texte intégralGoto, Syun, Tsuyoshi Sugimoto, Makoto Nanko et Natsumi Ideta. « Anisotropy and Metal Structure Characteristics of 3D Metal Printer Materials Due to Carburization ». Dans IFHTSE 2024, 16–22. ASM International, 2024. http://dx.doi.org/10.31399/asm.cp.ifhtse2024p0016.
Texte intégralCheng, Qinglu, Carl Sondergeld et Chandra Rai. « Experimental study of rock strength anisotropy and elastic modulus anisotropy ». Dans SEG Technical Program Expanded Abstracts 2013. Society of Exploration Geophysicists, 2013. http://dx.doi.org/10.1190/segam2013-1349.1.
Texte intégralGruttadauria, A., C. Mapelli, D. Mombelli, S. Barella et G. Villa. « Texture and Anisotropy Study on a Lightweight Steel ». Dans International Symposium on New Developments in Advanced High-Strength Sheet Steels. Association for Iron & Steel Technology, 2023. http://dx.doi.org/10.33313/298/014.
Texte intégralCelestino, T. B., G. R. de Castro, P. Vessaro, A. A. Bortolucci et O. J. Santos. « Strength and Deformability Anisotropy of Fiber-Reinforced Shotcrete ». Dans 10th International Conference on Shotcrete for Underground Support. Reston, VA : American Society of Civil Engineers, 2006. http://dx.doi.org/10.1061/40885(215)13.
Texte intégralFathi, A., J. J. Roger Cheng, Samer Adeeb et Joe Zhou. « Critical Buckling Strain in High Strength Steel Pipes Using Isotropic-Kinematic Hardening ». Dans 2010 8th International Pipeline Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ipc2010-31149.
Texte intégralHansen, Søren G., Nadieh E. Meinen et Henrik B. Jørgensen. « Anisotropic Concrete Compressive Strength in Existing Structures ». Dans IABSE Congress, New York, New York 2019 : The Evolving Metropolis. Zurich, Switzerland : International Association for Bridge and Structural Engineering (IABSE), 2019. http://dx.doi.org/10.2749/newyork.2019.2406.
Texte intégralLi, Wei, Juner Zhu, Yong Xia et Qing Zhou. « Testing and Modeling the Effect of Strain-Rate on Plastic Anisotropy for a Traditional High Strength Steel ». Dans ASME 2015 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/imece2015-53270.
Texte intégralFayemi, Olalekan, Qingyun Di*, Qihui Zhen et Oreoluwa B. Omisore. « Effect of transverse anisotropy on electromagnetic telemetry signal strength ». Dans GEM 2019 Xi'an : International Workshop and Gravity, Electrical & Magnetic Methods and their Applications, Chenghu, China, 19-22 April 2015. Society of Exploration Geophysicists and Chinese Geophysical Society, 2019. http://dx.doi.org/10.1190/gem2019-042.1.
Texte intégralDewhurst, D., J. Sarout, C. Delle Piane, M. Josh, A. F. Siggins et M. D. Raven. « Geomechanics and Physics Related to Shale Strength, Stiffness and Anisotropy ». Dans International Workshop on Geomechanics and Energy. Netherlands : EAGE Publications BV, 2013. http://dx.doi.org/10.3997/2214-4609.20131987.
Texte intégralRapports d'organisations sur le sujet "Strength anisotropy"
Allen, Jeffrey, Robert Moser, Zackery McClelland, Md Mohaiminul Islam et Ling Liu. Phase-field modeling of nonequilibrium solidification processes in additive manufacturing. Engineer Research and Development Center (U.S.), décembre 2021. http://dx.doi.org/10.21079/11681/42605.
Texte intégral