Littérature scientifique sur le sujet « SPINNING SHAFT »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « SPINNING SHAFT ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "SPINNING SHAFT"
Gayen, Debabrata, et Tarapada Roy. « Finite element based vibration analysis of functionally graded spinning shaft system ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science 228, no 18 (20 mars 2014) : 3306–21. http://dx.doi.org/10.1177/0954406214527923.
Texte intégralChang, Min-Yung, Jeng-Keag Chen et Chih-Yung Chang. « A simple spinning laminated composite shaft model ». International Journal of Solids and Structures 41, no 3-4 (février 2004) : 637–62. http://dx.doi.org/10.1016/j.ijsolstr.2003.09.043.
Texte intégralSturla, F. A., et A. Argento. « Free and Forced Vibrations of a Spinning Viscoelastic Beam ». Journal of Vibration and Acoustics 118, no 3 (1 juillet 1996) : 463–68. http://dx.doi.org/10.1115/1.2888206.
Texte intégralBotros, K. K. « Transient Phenomena in Compressor Stations During Surge ». Journal of Engineering for Gas Turbines and Power 116, no 1 (1 janvier 1994) : 133–42. http://dx.doi.org/10.1115/1.2906782.
Texte intégralSalam, Abdul, Muh Iswar, Bensar Pali, Agustinus Anggai et Janchristo Rantemangnga. « Modifikasi Alat Pemintal Benang Sutera Untuk Industri Rumah Tangga ». Jurnal Sinergi Jurusan Teknik Mesin 17, no 1 (5 mai 2019) : 101. http://dx.doi.org/10.31963/sinergi.v17i1.1599.
Texte intégralWong, E., et J. W. Zu. « Dynamic Response of a Coupled Spinning Timoshenko Shaft System ». Journal of Vibration and Acoustics 121, no 1 (1 janvier 1999) : 110–13. http://dx.doi.org/10.1115/1.2893936.
Texte intégralMario Sariski Dwi Ellianto, Yusuf Eko Nurcahyo et Fajrul Fikri Al Firdausi. « Empowerment of Fishermen Communities through the Utilization of Spinning Machine Technology in Weru Village, Paciran District ». Soeropati 4, no 2 (30 mai 2022) : 142–50. http://dx.doi.org/10.35891/js.v4i2.3302.
Texte intégralYadao, Adik Ramdayal, Ravi P. Singh et D. R. Parhi. « Influence of Parameters of Cracked Rotor System on its Vibration Characteristics in Viscous Medium at Finite Region ». Applied Mechanics and Materials 592-594 (juillet 2014) : 2061–65. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.2061.
Texte intégralLee, Usik, In Joon Jang et Il Wook Park. « Frequency-Domain Spectral Element Model of a Uniform Spinning Shaft ». Applied Mechanics and Materials 224 (novembre 2012) : 264–67. http://dx.doi.org/10.4028/www.scientific.net/amm.224.264.
Texte intégralBoukhalfa, Abdelkrim. « Campbell Diagrams of a Spinning Composite Shaft with Curvilinear Fibers ». Latin American Journal of Solids and Structures 14, no 4 (mars 2017) : 575–93. http://dx.doi.org/10.1590/1679-78253326.
Texte intégralThèses sur le sujet "SPINNING SHAFT"
Leonova, Ekaterina. « Structural Investigations of Complex Glasses by Solid-state NMR ». Doctoral thesis, Stockholms universitet, Institutionen för fysikalisk kemi, oorganisk kemi och strukturkemi, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-8565.
Texte intégralYung, Chang Chih, et 張智勇. « Free Vibration of Spinning Fiber Reinforced Composite Shaft-Disk-Blade Systems ». Thesis, 2004. http://ndltd.ncl.edu.tw/handle/20861312978076516384.
Texte intégral國立中興大學
機械工程學系
92
A finite element model for analyzing the vibration characteristics of composite shaft-disk-blade systems is presented here. The system consists of a composite blade attached to the rim of a rigid disk and a composite shaft to which the disk is fixed. This model is an extension of the composite blade and composite shaft models developed earlier by Chang et. al. by further taking also the coupling kinetic energy of the shaft and the blade into account. The extended Hamilton’s principle in conjunction with the finite element method is employed in deriving the equations of motion of system. The dynamic characteristics such as natural frequencies, whirling speeds and mode shapes of the composite shaft-disk-blade system are studied for various material and geometry properties of the blade and shaft, as well as for various rotating speeds. The numerical results indicate that the existence of the coupling flexible motion between blade and shaft could have significant influences on the dynamic characteristics of the system. For the purpose of verification, the results obtained using the current finite element model are compared with those obtained using the available commercial software for the case of a free non-rotating shaft-disk-blade system made of an isotropic material. The dynamic behaviors of the rotating composite shafts containing randomly oriented reinforcements are furthering investigated in this study. Incorporating the Mori-Tanaka mean-field theory to account for interaction at finite concentrations of reinforcements with the equivalent inclusion method, the effective elastic moduli are expressed as a function of phase properties, volume fraction, orientation angles, and reinforcements’ shape. Based on shaft’s model and taking these effective elastic moduli into account, the natural frequencies of the stationary shafts, and the whirling speeds as well as the critical speeds of the rotating shafts are presented.
KUMAR, RISHIR. « COMPUTATIONAL ANALYSIS OF AN ECCENTRIC ROTOR THROUGH BONDGRAPH ». Thesis, 2017. http://dspace.dtu.ac.in:8080/jspui/handle/repository/15949.
Texte intégralWu, Ching-Yi, et 吳慶頤. « Vibration Analysis of Double Spinning Composite Shafts Systems Coupled by Spur Gears ». Thesis, 2007. http://ndltd.ncl.edu.tw/handle/95552528247136214719.
Texte intégral國立中興大學
機械工程學系所
95
In this study, a spur gear coupled theory combined with a spinning composite flexible shaft theory, is used to develop a double spinning composite shafts model that are containing coupled by spur gears. The gears are assumed rigid, but at the contact gear teeth, a spring and viscose dashpot are used to simulate the effect due to the deformation of the teeth resulting from large contact forces. For the gears, firstly, the displacement and velocity vectors of the contact location are used to find the excitation forces that come from eccentricity and the static transmission error, and the coupled stiffness and damping matrices. Assembling the coupled stiffness and damping matrices in those of the composite shaft system, the governing equations of the whole system are derived. The governing equations are used to study the isotropic shafts and made of composite materials. The natural frequencies and vibration mode shapes are analyzed. Campbell diagrams are plotted. And then indicate that mode shapes may change as the spinning speed varies. Finally, the dynamic responses of the systems are analyzed using the mode summation method.
Wang, Wei-Fan, et 王偉帆. « Studies of Dynamic Responses of Spinning Shafts Including Rigid Body Motion Effect ». Thesis, 2010. http://ndltd.ncl.edu.tw/handle/99546996922184207763.
Texte intégral國立中興大學
機械工程學系所
98
The objective of this thesis is to study the dynamic responses of the flexible spinning-shaft system including the rigid-body motion effect. The spinning-shaft system being considered include the rigid disk, the flexible shaft, and bearing supports which are modeled as springs and viscous dampers. To derive, the equations of motion of the spinning-shaft system. First, the kinetic energy and the strain energy of the spinning shaft, the kinetic energy of the rigid disk, and the work done by support forces of the bearings and centrifugal force of the disk are found. Then by employing the Hamilton’s principle together with the finite element method, the equations of motion of the spinning-shaft system including both the rigid-body motion and flexible deformation effects of the shaft are obtained. In the study of dynamic responses, in order to simplify the analysis, the influence of the flexible deformation of the shaft on the rigid-body motion of system is neglected. The equations of motion then can be divided into two groups corresponding to that of rigid-body motion and that of flexible motion affected by the rigid-body motion. The nonlinear equations for rigid-body motion is further simplified to linear ones for comparison. In the numerical analysis, a higher-order Runge-Kutta method is used to solve the equations of motion describing the rigid-body motion of the system. With above obtained results equations of flexible motion affected by rigid-body motion are then analyzed by the Newmark’s method. The influences of the parameters such as rotational viscous damping coefficient, the locations of bearings and the disk, and the motor’s acceleration on the dynamic responses are investigated. Comparisons are also made with those of the spinning shaft system without considering the rigid-body motion effect.
Wylie, Benjamin. « Solid-state magic-angle spinning NMR methods for tensor measurements and protein structure refinement using chemical shift tensors / ». 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3314941.
Texte intégralSource: Dissertation Abstracts International, Volume: 69-05, Section: B, page: 3023. Adviser: Chad M. Rienstra. Includes bibliographical references (leaves 222-233). Available on microfilm from Pro Quest Information and Learning.
Huang, Po-chi, et 黃柏綺. « The Determination of Chemical Shift Tensor and Electric Field Gradient Tensor by One- and Two-Dimensional Magic-Angles-Spinning Experiments ». Thesis, 2007. http://ndltd.ncl.edu.tw/handle/n3su8a.
Texte intégralLivres sur le sujet "SPINNING SHAFT"
Melanson, John. Free vibration and stability analysis of spinning timoshenko shafts with external and internal damping. Ottawa : National Library of Canada, 1996.
Trouver le texte intégralRossman, Court E. Magnets, Motors, and Generators : Magnets and Spinning Shafts. Personal, 2022.
Trouver le texte intégralJohansen, Bruce, et Adebowale Akande, dir. Nationalism : Past as Prologue. Nova Science Publishers, Inc., 2021. http://dx.doi.org/10.52305/aief3847.
Texte intégralChapitres de livres sur le sujet "SPINNING SHAFT"
Georgiades, Fotios. « Chaotic Dynamics in Spinning Shafts with Non-constant Rotating Speed Described by Variant Lyapunov Exponents ». Dans Nonlinear Dynamics of Structures, Systems and Devices, 471–84. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-34713-0_47.
Texte intégralBoukhalfa, Abdelkrim. « Dynamic Analysis of a Spinning Laminated Composite-Material Shaft Using the hp-version of the Finite Element Method ». Dans Advances in Vibration Analysis Research. InTech, 2011. http://dx.doi.org/10.5772/15676.
Texte intégralSteinberg, Paul F. « The Big Trade ». Dans Who Rules the Earth ? Oxford University Press, 2015. http://dx.doi.org/10.1093/oso/9780199896615.003.0010.
Texte intégralActes de conférences sur le sujet "SPINNING SHAFT"
Botros, K. K. « Transient Phenomena in Compressor Stations During Surge ». Dans ASME 1992 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1992. http://dx.doi.org/10.1115/92-gt-024.
Texte intégralWang, Z. C., W. L. Cleghorn et S. D. Yu. « Free Vibration of Spinning Stepped Timoshenko Beams Using Finite Element Method ». Dans ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-2175.
Texte intégralSong, Ohseop, Liviu Librescu et Nam-Heui Jeong. « Vibration and Stability Control of Spinning Flexible Shaft via Integration of Smart Materials Technology ». Dans ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1735.
Texte intégralChoi, Jungsik, Jaesang Lee et Usik Lee. « Spectral Element Model of a Spinning Timoshenko Shaft with Thick Disks ». Dans 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virigina : American Institute of Aeronautics and Astronautics, 2009. http://dx.doi.org/10.2514/6.2009-2461.
Texte intégralYoon, Hyungwon, Sungsoo Na et Liviu Librescu. « Vibration and Stability of a Composite Thin-Walled Spinning Tapered Shaft ». Dans 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. Reston, Virigina : American Institute of Aeronautics and Astronautics, 2005. http://dx.doi.org/10.2514/6.2005-1871.
Texte intégralZu, Jean W., et Edward Wong. « Dynamic Response of a Spinning Timoshenko Shaft With Coupled Bending and Torsion ». Dans ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-4026.
Texte intégralYang, Shih-Ming. « Vibration of a Spinnng Annular Disk With Coupled Rigid Body Motion ». Dans ASME 1991 Design Technical Conferences. American Society of Mechanical Engineers, 1991. http://dx.doi.org/10.1115/detc1991-0288.
Texte intégralChen, Lien-Wen, et Hong-Cheng Sheu. « Critical Speeds of Shaft-Disk Systems Subjected to Longitudinal Forces ». Dans ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-4183.
Texte intégralLudlow, C., A. Cutler, S. Klepper et M. van Schoor. « Non-Contacting Water Activated Bulkhead Seals : Improved Safety and Reduced Costs ». Dans SNAME 13th Propeller and Shafting Symposium. SNAME, 2012. http://dx.doi.org/10.5957/pss-2012-011.
Texte intégralZhang, Yunjia, et Dengfang Ruan. « Investigation on the Lubrication Performances and Thermal Characteristics of the Tapered Roller Bearing ». Dans ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/detc2017-67052.
Texte intégralRapports d'organisations sur le sujet "SPINNING SHAFT"
Mao, Kanmi. Indirectly detected chemical shift correlation NMR spectroscopy in solids under fast magic angle spinning. Office of Scientific and Technical Information (OSTI), janvier 2011. http://dx.doi.org/10.2172/1029608.
Texte intégral