Bibliographies thématiques / Software router / Articles de revues

Articles de revues sur le sujet « Software router »

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Software router.
Auteur : Grafiati
Publié le 14 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Software router ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Nasir, M. H. M., N. A. M. Radzi, W. S. H. M. W. Ahmad, F. Abdullah et M. Z. Jamaludin. « Comparison of router testbeds : embedded system-based, software-based, and multiprotocol label switching (MPLS) ». Indonesian Journal of Electrical Engineering and Computer Science 15, no 3 (1 septembre 2019) : 1250. http://dx.doi.org/10.11591/ijeecs.v15.i3.pp1250-1256.

Texte intégral
Résumé :
<span>Multiprotocol Label Switching (MPLS) is a promising packet switching technology in the field of communication network, allowing router to forward the packets based on labels. However, off-the-shelves routers are made to be non-configurable, making it less suitable for academic research purposes. The aim of this paper is to explore the possibility of developing a configurable MPLS router by reviewing embedded system-based router, software-based router and commercial MPLS router itself. The architecture of the routers will be described in detail and their performances will be compared. From the analysis, we found that the development of reconfigurable MPLS router testbed is achievable by using embedded system-based hardware due to its freedom of reconfigurability.</span>
Styles APA, Harvard, Vancouver, ISO, etc.
2

Decasper, D., Z. Dittia, G. Parulkar et B. Plattner. « Router plugins : a software architecture for next-generation routers ». IEEE/ACM Transactions on Networking 8, no 1 (2000) : 2–15. http://dx.doi.org/10.1109/90.836474.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Decasper, Dan, Zubin Dittia, Guru Parulkar et Bernhard Plattner. « Router plugins : a software architecture for next generation routers ». ACM SIGCOMM Computer Communication Review 28, no 4 (octobre 1998) : 229–40. http://dx.doi.org/10.1145/285243.285285.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

ZHANG, Xiao-Ping. « Scalable Router ». Journal of Software 19, no 6 (21 octobre 2008) : 1452–64. http://dx.doi.org/10.3724/sp.j.1001.2008.01452.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Louati, Wajdi, Badii Jouaber et Djamal Zeghlache. « Configurable software-based edge router architecture ». Computer Communications 28, no 14 (septembre 2005) : 1692–99. http://dx.doi.org/10.1016/j.comcom.2005.02.014.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Supriyono, Abdul Rohman, et Yudi Prayudi. « LIVE FORENSICS ACQUISITION FILE SHARING SAMBA PADA MIKROTIK ROUTER OS ». Cyber Security dan Forensik Digital 1, no 1 (24 mai 2018) : 7–13. http://dx.doi.org/10.14421/csecurity.2018.1.1.1210.

Texte intégral
Résumé :
Smart Router is a router device that is equipped with Smart Wi-Fi software that allows us to easily manage and monitor the home network, and has more features or services than regular routers in general. Routers of this type include one solution in building a local area network that can be used as file server in file sharing. But regardless of the benefits it does not rule out the possibility of a crime by utilizing file sharing. Therefore, in the field of digital forensics required live forensic methods and live acquisitions, since the smart router belongs to a critical electronic item category, where data (log) can be lost when the device is turned off.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Harizal, Bangun, Adnan Purwanto et Wahyu Pamungkas. « Analisis Perancangan PC (Personal Computer) Router Proxy Untuk Menggabungkan Tiga Jalur Koneksi Di Indospeed ». JURNAL INFOTEL - Informatika Telekomunikasi Elektronika 4, no 1 (10 mai 2012) : 29. http://dx.doi.org/10.20895/infotel.v4i1.99.

Texte intégral
Résumé :
Router very important for computer network. To get the router can buy a router products but can also design your own using personal computers. Mikrotik is one of the router manufacturer that provides products in the form of hardware or software. If you want to pay less to design a router can use operating system Ubuntu. This operating system is open source and provided free of charge by the manufacturer. If you want to design a router with this OS can make use of personal computers are often used in homes or offices. Merging the performance of both types of routers can also be usedto cover the lack of one another. With the proxy on a local network then the use of bandwidth can be saved. Becausethere are several websites cached and stored therein if the same website is accessed by other users, the router transmits only from the proxy to the computerwhich make the request.
Styles APA, Harvard, Vancouver, ISO, etc.
8

Qie, Xiaohu, Andy Bavier, Larry Peterson et Scott Karlin. « Scheduling computations on a software-based router ». ACM SIGMETRICS Performance Evaluation Review 29, no 1 (juin 2001) : 13–24. http://dx.doi.org/10.1145/384268.378425.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Spang, Bruce. « Updating the Theory of Buffer Sizing ». ACM SIGMETRICS Performance Evaluation Review 49, no 3 (22 mars 2022) : 55–56. http://dx.doi.org/10.1145/3529113.3529131.

Texte intégral
Résumé :
Internet routers have packet buffers which reduce packet loss during times of congestion. Sizing the router buffer correctly is important: if a router buffer is too small, it can cause high packet loss and link under-utilization. If a buffer is too large, packets may have to wait an unnecessarily long time in the buffer during congested periods, often up to hundreds of milliseconds. While an operator can reduce the operational size of a router buffer, the maximum size of a router buffer is decided by the router manufacturer, and the operator typically configures the router to use all the available buffers. Without clear guidance about how big a buffer needs to be, manufacturers tend to oversize buffers and operators tend to configure larger buffers than necessary, leading to increased cost and delay.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Song, He, Xiaofeng Wang, Mengdong Zhai et Guangjie Zhang. « High-Fidelity Router Emulation Technologies Based on Multi-Scale Virtualization ». Information 11, no 1 (16 janvier 2020) : 47. http://dx.doi.org/10.3390/info11010047.

Texte intégral
Résumé :
Virtualization has the advantages of strong scalability and high fidelity in host node emulation. It can effectively meet the requirements of network emulation, including large scale, high fidelity, and flexible construction. However, for router emulation, virtual routers built with virtualization and routing software use Linux Traffic Control to emulate bandwidth, delay, and packet loss rates, which results in serious distortions in congestion scenarios. Motivated by this deficiency, we propose a novel router emulation method that consists of virtualization plane, routing plane, and a traffic control method. We designed and implemented our traffic control module in multi-scale virtualization, including the kernel space of a KVM-based virtual router and the user space of a Docker-based virtual router. Experiments show not only that the proposed method achieves high-fidelity router emulation, but also that its performance is consistent with that of a physical router in congestion scenarios. These findings provide good support for network research into congestion scenarios on virtualization-based emulation platforms.
Styles APA, Harvard, Vancouver, ISO, etc.
11

Liu, Jun Xian, Wei Zhang, Quan Zhi Zhou, Xiao Fang Lou et Xu Fei. « Design and Implementation of Router Configuration Software in the Information System ». Applied Mechanics and Materials 513-517 (février 2014) : 1586–89. http://dx.doi.org/10.4028/www.scientific.net/amm.513-517.1586.

Texte intégral
Résumé :
Due to the complexity of the router, its professional configuration leads to the phenomenon that operation and maintenance personnel of the information systems can not be competent for the configuration tasks. In order to lower the practitioner threshold of their operating and maintenance personnel, a WYSIWYG router configuration software in graphical interface needs to be developed. With the reduced quality requirements of employees, the main functions of the router configuration are achieved. This article describes the development and design of this kind of configuration software.
Styles APA, Harvard, Vancouver, ISO, etc.
12

Aligholipour, Rashid, Mohammad Baharloo, Behnam Farzaneh, Meisam Abdollahi et Ahmad Khonsari. « TAMA ». ACM Transactions on Embedded Computing Systems 20, no 5 (juillet 2021) : 1–24. http://dx.doi.org/10.1145/3462700.

Texte intégral
Résumé :
Nowadays, static power consumption in chip multiprocessor (CMP) is the most crucial concern of chip designers. Power-gating is an effective approach to mitigate static power consumption particularly in low utilization. Network-on-Chip (NoC) as the backbone of multi- and many-core chips has no exception. Previous state-of-the-art techniques in power-gating desire to decrease static power consumption alongside the lack of diminution in performance of NoC. However, maintaining the performance and utilization of the power-gating approach has not yet been addressed very well. In this article, we propose TAMA (Turn-Aware Mapping & Architecture) as an effective method to boost the performance of the TooT method that was only powering on a router during turning pass or packet injection. In other words, in the TooT method, straight and eject packets pass the router via a bypass route without powering on the router. By employing meta-heuristic approaches (Genetic and Ant Colony algorithms), we develop a specific application mapping that attempts to decrease the number of turns through interconnection networks. Accordingly, the average latency of packet transmission decreases due to fewer turns. Also, by powering on turn routers in advance with lightweight hardware, the latency of sending packets diminishes. The experimental results demonstrate that our proposed approach, i.e., TAMA achieves more than 13% reduction in packet latency of NoC in comparison with TooT. Besides the packet latency, the power consumption of TAMA is reduced by about 87% compared to the traditional approach.
Styles APA, Harvard, Vancouver, ISO, etc.
13

Andreev, A. Yu. « Methodology for determining optimal routes in operational planning of road freight transport ». Вестник гражданских инженеров 19, no 1 (2022) : 107–13. http://dx.doi.org/10.23968/1999-5571-2022-19-1-107-113.

Texte intégral
Résumé :
The article presents a methodology for determining optimal routes in dynamically changing conditions of operational planning of road freight transport. The methodology consists of two main elements: theoretical software (router) and implementing software (routing protocol). It has unique properties, namely, the analytical apparatus of the router provides the possibility of choosing an effective action in the presence of stochastic uncertainty (when there is no information, which would guarantee the justified application of the well known laws of distribution of random variables). It works with an unlimited number of entries into the system, therefore, not only effective performance indicators of cars can and should be included in the databases of the studied data, but effective indicators of cargo handling facilities as well.
Styles APA, Harvard, Vancouver, ISO, etc.
14

Yin, Zuoning, Matthew Caesar et Yuanyuan Zhou. « Towards understanding bugs in open source router software ». ACM SIGCOMM Computer Communication Review 40, no 3 (22 juin 2010) : 34–40. http://dx.doi.org/10.1145/1823844.1823849.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
15

Yau, D. K. Y., et Xiangjing Chen. « Resource management in software-programmable router operating systems ». IEEE Journal on Selected Areas in Communications 19, no 3 (mars 2001) : 488–500. http://dx.doi.org/10.1109/49.917709.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
16

Aldaya, Ivan, Raul Cafini, Walter Cerroni, Carla Raffaelli et Michele Savi. « Optical switch emulation in programmable software router testbed ». Photonic Network Communications 25, no 1 (22 novembre 2012) : 10–23. http://dx.doi.org/10.1007/s11107-012-0386-7.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
17

Jun, Su, Krzysztof Przystupa, Mykola Beshley, Orest Kochan, Halyna Beshley, Mykhailo Klymash, Jinfei Wang et Daniel Pieniak. « A Cost-Efficient Software Based Router and Traffic Generator for Simulation and Testing of IP Network ». Electronics 9, no 1 (27 décembre 2019) : 40. http://dx.doi.org/10.3390/electronics9010040.

Texte intégral
Résumé :
The development was carried out using the Qt5.2 integrated development environment, which uses the programming language C++. The main advantage of this environment is that the code written in it can be compiled to different platforms (for example, Windows, Linux, Mac OS). A software router based on a modular architecture has been developed. It uses the socket technology, which allows forming a program-oriented packet network with any topology, including full-coupled topology. A network traffic generator to test the developed software router has been designed. We proposed a scheme to measure the packet processing time of a router using a specialized packet-capture network interface cards (NIC 1 and NIC 2) and a novel traffic generator installed on PC. Based on an experimental test bed we confirmed that our software router provides a cost-efficient alternative to the expensive, special hardware router CISCO 2801.
Styles APA, Harvard, Vancouver, ISO, etc.
18

Aweya, James. « On the design of IP routers Part 1 : Router architectures ». Journal of Systems Architecture 46, no 6 (avril 2000) : 483–511. http://dx.doi.org/10.1016/s1383-7621(99)00028-4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
19

Sheng, Xin Ya, Yu Wang, Wei Ming Wang et Jing Jing Zhou. « ForCES Architecture Router Models in OPNET ». Advanced Materials Research 186 (janvier 2011) : 433–37. http://dx.doi.org/10.4028/www.scientific.net/amr.186.433.

Texte intégral
Résumé :
Open reconfigurable router (ForCES) is based on the separation of control parts and forwarding parts that can satisfy the open programmable request of the next generation router, and is the next generation router's development direction. At present, the research on ForCES architeture router has completed the system structure and interface standard protocol design, and realized the basic logic function blocks (LFBs) of the control element (CE) and forwarding element (FE), ForCES prototypemachine has also succeeded in operation. However, the performance of any software and protocol must be inspected. Performance evaluation can adopt queuing theory、random Petri nets、 stochastic process algebra and OPNET software, etc. OPNET with user-friendly interface and stratified modeling thought can simplify the process of modeling, clear modeling methodology. The paper adopts OPNET Modeler simulation software to study on ForCES architecture router performance.
Styles APA, Harvard, Vancouver, ISO, etc.
20

Appenzeller, Guido, Isaac Keslassy et Nick McKeown. « Sizing router buffers ». ACM SIGCOMM Computer Communication Review 34, no 4 (30 août 2004) : 281–92. http://dx.doi.org/10.1145/1030194.1015499.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
21

LI, De-Quan. « Router Numbering Based Adaptive Packet Marking ». Journal of Software 18, no 10 (2007) : 2652. http://dx.doi.org/10.1360/jos182652.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
22

Spalink, Tammo, Scott Karlin, Larry Peterson et Yitzchak Gottlieb. « Building a robust software-based router using network processors ». ACM SIGOPS Operating Systems Review 35, no 5 (décembre 2001) : 216–29. http://dx.doi.org/10.1145/502059.502056.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
23

Fernández, Carolina, Sergio Giménez, Eduard Grasa et Steve Bunch. « A P4-Enabled RINA Interior Router for Software-Defined Data Centers ». Computers 9, no 3 (2 septembre 2020) : 70. http://dx.doi.org/10.3390/computers9030070.

Texte intégral
Résumé :
The lack of high-performance RINA (Recursive InterNetwork Architecture) implementations to date makes it hard to experiment with RINA as an underlay networking fabric solution for different types of networks, and to assess RINA’s benefits in practice on scenarios with high traffic loads. High-performance router implementations typically require dedicated hardware support, such as FPGAs (Field Programmable Gate Arrays) or specialized ASICs (Application Specific Integrated Circuit). With the advance of hardware programmability in recent years, new possibilities unfold to prototype novel networking technologies. In particular, the use of the P4 programming language for programmable ASICs holds great promise for developing a RINA router. This paper details the design and part of the implementation of the first P4-based RINA interior router, which reuses the layer management components of the IRATI Linux-based RINA implementation and implements the data-transfer components using a P4 program. We also describe the configuration and testing of our initial deployment scenarios, using ancillary open-source tools such as the P4 reference test software switch (BMv2) or the P4Runtime API.
Styles APA, Harvard, Vancouver, ISO, etc.
24

Jevtić, Radoje, et Ivana Janković. « Exposure of the students of the secondary school of electrical engineering "Nikola Tesla" to wireless electromagnetic radiation ». Zdravstvena zastita 51, no 4 (2022) : 106–23. http://dx.doi.org/10.5937/zdravzast2204106j.

Texte intégral
Résumé :
Introduction/Aim: Wireless electromagnetic radiation from routers is an everyday occurrence in the life and work of modern man. They are widely used in many professional, public and domestic facilities, which means that people of all ages can be constantly exposed to electromagnetic radiation from these devices. The aim of this study was to determine the electric field strength, the magnetic field strength, and the electromagnetic exposure of students in different laboratories of the Secondary School "Nikola Tesla", depending on the type of routers installed in them, as well as to check some of the obtained results with the help of the appropriate software program of high-frequency (High-Frequency Simulation Software - HFFSS) for the simulation of electromagnetic radiation through different environments. Methods: Measurements of electric and magnetic field strength, as well as electromagnetic exposure, were carried out using the measuring instrument Spectran HF 60105, on four different types of routers installed in four laboratories of the Secondary School of Electrical Engineering "Nikola Tesla" in Niš. Measurements were realized on each router, through five horizontal and five vertical positions, with a distance of 45o in relation to the horizontal and normal axis of the router, and with spaces of 1 cm, which gives a total number of one thousand measurements. Results: The measured results obtained on four different routers that operated at a frequency of 2.4 GHz for the electric field strength (measured in millivolts per meter), magnetic field strength (measured in microampere per meter) and electromagnetic exposure (in microWatts per square centimeter) were below the limit values defined by standards. The achieved results were verified only for the router TL-WR841HP with the help of HFSS for the simulation of electromagnetic radiation through different environments. The result of the simulation check practically confirms the reliability of the measured results for TL-WR841HP router. Conclusion: Measuring and monitoring electromagnetic radiation is a very important task aimed at preserving and improving the quality of the working and living environment, as well as the quality of life and health of people and children. Software programs for the simulation of electromagnetic radiation can be used when it is not possible to carry out experimental measurements due to technical problems, hindered access to the device, danger of excessive radiation or some other reasons.
Styles APA, Harvard, Vancouver, ISO, etc.
25

Kim, Ku-Hwan, Hoang-Linh To, Won-Joo Hwang et Jung-Tae Lee. « Infinite Queue Management via Cascade Control for Industrial Routers in Smart Grid IP Networks ». Scientific Programming 2016 (2016) : 1–10. http://dx.doi.org/10.1155/2016/5796907.

Texte intégral
Résumé :
Smart grid applications experience an extremely wide range of communication delay. Data flows of those applications are normally aggregated at industrial network routers in substations, form infinite (long) queues termed bufferbloat issue, and might damage the operation of transmission control protocol. The default queue management scheme, DropTail, in such routers just drops packets if queue is full while the others in literature are mostly based on one-loop feedback control where an optimal point of performance between queue length and drop rate is limited. In this paper, we study the problem of managing a long queue of industrial router at substation under heterogeneous smart grid networks. Specifically, we propose an enqueue-dequeue dropping cascade control using a two-loop design method to control both window size and queue length. Moreover, our proposal can be easily implemented into router firmware with provided discrete expressions. Finally, our simulation results are presented to validate the possible benefits that can be gained from cascade control and compare the existing queue management methods as well.
Styles APA, Harvard, Vancouver, ISO, etc.
26

Casado, Martin, Vikram Vijayaraghavan, Guido Appenzeller et Nick McKeown. « The Stanford Virtual Router ». ACM SIGCOMM Computer Communication Review 32, no 3 (juillet 2002) : 26. http://dx.doi.org/10.1145/571697.571715.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
27

Chasaki, Danai. « "Roto-Rooting" your router ». ACM SIGCOMM Computer Communication Review 41, no 4 (22 octobre 2011) : 396–97. http://dx.doi.org/10.1145/2043164.2018486.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
28

McKeown, Nick, Guido Appenzeller et Isaac Keslassy. « Sizing router buffers (redux) ». ACM SIGCOMM Computer Communication Review 49, no 5 (8 novembre 2019) : 69–74. http://dx.doi.org/10.1145/3371934.3371957.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
29

Li, Cunlu, Dezun Dong, Shazhou Yang, Xiangke Liao, Guangyu Sun et Yongheng Liu. « CIB-HIER ». ACM Transactions on Architecture and Code Optimization 18, no 4 (31 décembre 2021) : 1–21. http://dx.doi.org/10.1145/3468062.

Texte intégral
Résumé :
Hierarchical organization is widely used in high-radix routers to enable efficient scaling to higher switch port count. A general-purpose hierarchical router must be symmetrically designed with the same input buffer depth, resulting in a large amount of unused input buffers due to the different link lengths. Sharing input buffers between different input ports can improve buffer utilization, but the implementation overhead also increases with the number of shared ports. Previous work allowed input buffers to be shared among all router ports, which maximizes the buffer utilization but also introduces higher implementation complexity. Moreover, such design can impair performance when faced with long packets, due to the head-of-line blocking in intermediate buffers. In this work, we explain that sharing unused buffers between a subset of router ports is a more efficient design. Based on this observation, we propose Centralized Input Buffer Design in Hierarchical High-radix Routers (CIB-HIER), a novel centralized input buffer design for hierarchical high-radix routers. CIB-HIER integrates multiple input ports onto a single tile and organizes all unused input buffers in the tile as a centralized input buffer. CIB-HIER only allows the centralized input buffer to be shared between ports on the same tile, without introducing additional intermediate virtual channels or global scheduling circuits. Going beyond the basic design of CIB-HIER, the centralized input buffer can be used to relieve the head-of-line blocking caused by shallow intermediate buffers, by stashing long packets in the centralized input buffer. Experimental results show that CIB-HIER is highly effective and can significantly increase the throughput of high-radix routers.
Styles APA, Harvard, Vancouver, ISO, etc.
30

Dobkin, Rostislav (Reuven), Ran Ginosar et Avinoam Kolodny. « QNoC asynchronous router ». Integration 42, no 2 (février 2009) : 103–15. http://dx.doi.org/10.1016/j.vlsi.2008.03.001.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
31

Gao, Xianming, Baosheng Wang et Xiaozhe Zhang. « VR-Cluster : Dynamic Migration for Resource Fragmentation Problem in Virtual Router Platform ». Scientific Programming 2016 (2016) : 1–14. http://dx.doi.org/10.1155/2016/3976965.

Texte intégral
Résumé :
Network virtualization technology is regarded as one of gradual schemes to network architecture evolution. With the development of network functions virtualization, operators make lots of effort to achieve router virtualization by using general servers. In order to ensure high performance, virtual router platform usually adopts a cluster of general servers, which can be also regarded as a special cloud computing environment. However, due to frequent creation and deletion of router instances, it may generate lots of resource fragmentation to prevent platform from establishing new router instances. In order to solve “resource fragmentation problem,” we firstly propose VR-Cluster, which introduces two extra function planes including switching plane and resource management plane. Switching plane is mainly used to support seamless migration of router instances without packet loss; resource management plane can dynamically move router instances from one server to another server by using VR-mapping algorithms. Besides, three VR-mapping algorithms including first-fit mapping algorithm, best-fit mapping algorithm, and worst-fit mapping algorithm are proposed based on VR-Cluster. At last, we establish VR-Cluster protosystem by using general X86 servers, evaluate its migration time, and further analyze advantages and disadvantages of our proposed VR-mapping algorithms to solve resource fragmentation problem.
Styles APA, Harvard, Vancouver, ISO, etc.
32

LI, DAWEI, JIE WU, DAJIN WANG et JIAYIN WANG. « Software-Defined Networking Switches for Fast Single-Link Failure Recovery ». Journal of Interconnection Networks 18, no 04 (décembre 2018) : 1850014. http://dx.doi.org/10.1142/s0219265918500147.

Texte intégral
Résumé :
In this paper, we consider IP fast recovery from single-link failures in a given network topology. The basic idea is to replace some existing routers with a designated switch. When a link fails, the affected router will send all the affected traffic to the designated switch (through pre-configured IP tunnels), which will deliver the affected traffic to its destination without using the failed link. The goal of the approach is to achieve faster failure recovery than traditional routing protocols that employ reactive computing upon link failures. Software-Defined Networking (SDN) switches can serve as the designated switches because they can flexibly redirect affected traffic to other routes, instead of only to the shortest paths in the network. However, SDN switches are very expensive. Our objective is to minimize the number of SDN switches needed and to guarantee that the network can still recover from any single-link failure. For networks with uniform link costs, we show that using normal non-SDN switches with IP tunneling capability as designated switches can guarantee recovery from any single-link failure. For networks with general link costs, we find that not all single-link failures can be recovered by using non-SDN switches as designated switches; by using SDN switches only when necessary, we can reduce the total number of SDN switches needed compared to an existing work. We conduct extensive simulations to verify our proposed approaches.
Styles APA, Harvard, Vancouver, ISO, etc.
33

Xu, Ke, Wenlong Chen, Chuang Lin, Mingwei Xu, Dongchao Ma et Yi Qu. « Toward a practical reconfigurable router : a software component development approach ». IEEE Network 28, no 5 (septembre 2014) : 74–80. http://dx.doi.org/10.1109/mnet.2014.6915443.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
34

Hall, J. G., L. Rapanotti et M. A. Jackson. « Problem Oriented Software Engineering : Solving the Package Router Control Problem ». IEEE Transactions on Software Engineering 34, no 2 (mars 2008) : 226–41. http://dx.doi.org/10.1109/tse.2007.70769.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
35

Sudaryanto, Sudaryanto, Anggraini Kusumaningrum, Yuliani Indrianingsih et Dadan Rachman Prabowo. « Web based Enhanced Interior Gateway Routing Protocol (EIGRP) on cisco router 2811 using cisco's Application Programming Interface (API) ». Compiler 10, no 2 (30 novembre 2021) : 79. http://dx.doi.org/10.28989/compiler.v10i2.966.

Texte intégral
Résumé :
Enhanced Interior Gateway Routing Protocol (EIGRP) is a routing protocol that can be used to determine the path of data to be sent. EIGRP can achieve goals and study interconnected networks to obtain useful information to determine the best path. EIGRP is only adopted by Cisco routers or can be called a Cisco Proprietary Protocol, which can only be used on Cisco router devices. Currently, the EIGRP routing configuration uses the command line. For this reason, a Website-based EIGRP system was created and can be accessed remotely (remotely) with the aim of providing freedom of access and not focusing on one device. Website-based EIGRP system was created by utilizing Cisco's API as a liaison between the programming language and Cisco Router 2811 software. Telnet utilization plays a very important role in creating a Website-based EIGRP System where Telnet can provide wider access in management. By visiting the host and port of the router, the EIGRP Website Based System can easily do this. The results of the test in this study indicate that the Website-based EIGRP system is proven to be able to configure, so that administrators can use it for device management of Cisco Router 2811.
Styles APA, Harvard, Vancouver, ISO, etc.
36

Jadhav, Nathrao B., et Bharat S. Chaudhari. « Optimized 6x6 Optical Router for Three Dimensional Optical Networks-on-Chip ». Journal of Physics : Conference Series 2325, no 1 (1 août 2022) : 012008. http://dx.doi.org/10.1088/1742-6596/2325/1/012008.

Texte intégral
Résumé :
Abstract The interconnection network is very influential in Multiprocessor system-on-chip (MPSoC) performance. Due to low power efficiency and high latency, conventional interconnects are replaced by electrical networks on-chip (ENoC). However, ENoCs cannot gratify the bandwidth, latency and loss requirements within the available power budget of optical integrated circuits. The reasons being restricted bandwidth, extended delay, and reasonably high power consumption. So, ENoC are being replaced by optical networks-on-chip (ONoC). ONoC has emerged as a promising substitute to provide greater bandwidth, low latency and low power ingestion in MPSoCs. Number of cores required on-chip is increasing which leads to demand of multilayer multi-core processors. Three dimensional (3D) ONoC has become essential for such multilayer multi-core processors. For 3D ONoC, in this paper we have proposed 6x6 non-blocking optical router using micro-ring resonator (MRR) with less number of waveguide crossings and waveguide bendings. Phoenix software is used to simulate proposed optical router. Insertion loss of proposed optical router is lowest among existing non-blocking optical routers of 3D ONoC.
Styles APA, Harvard, Vancouver, ISO, etc.
37

Badrouchi, Sami, Abdelkrim Zitouni, Kholdoun Torki et Rached Tourki. « Asynchronous NoC Router Design ». Journal of Computer Science 1, no 3 (1 mars 2005) : 429–36. http://dx.doi.org/10.3844/jcssp.2005.429.436.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
38

McKeown, Nick, et Damon Wischik. « Making router buffers much smaller ». ACM SIGCOMM Computer Communication Review 35, no 3 (juillet 2005) : 73–74. http://dx.doi.org/10.1145/1070873.1070883.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
39

Vishwanath, Arun, Vijay Sivaraman et Marina Thottan. « Perspectives on router buffer sizing ». ACM SIGCOMM Computer Communication Review 39, no 2 (31 mars 2009) : 34–39. http://dx.doi.org/10.1145/1517480.1517487.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
40

S, Suharto, Paryono P et Hartanto Prawibowo. « WOODEN MASK MAKING TECHNIQUES WITH 3 AXIS CNC ROUTER MACHINE ». International Journal of Innovative Research in Advanced Engineering 7, no 11 (30 novembre 2020) : 384–90. http://dx.doi.org/10.26562/ijirae.2020.v0711.002.

Texte intégral
Résumé :
This study aims to determine the technique of making wooden masks with a 3-axis CNC Router machine and to compare the time and quality of the results of making masks manually. This research method uses cangkring wood, mahoni wood and pule wood. The design process with the help of the CorelDraw software, Aspire vectric. Manufacturing process with the mach-3 software. The machining process of a 3 Axis CNC Router with a variety of machining roughing and finishing with a variety of tool paths, step over, step down, spindle rotation, plugrate, feederate, and machining time. The results showed making wooden masks with a CNC Router machine has a faster time, uniform shape and size than manual making. Pule wood material provides a faster yield, smoother surface, and machineable than cangkring wood and mahoni wood. The machining time of the CNC router for making one wooden mask is 2 hours-20 minutes for cangkring wood, 3 hours-06 minutes for mahogany wood, and 2 hours-07 minutes for pule wood.
Styles APA, Harvard, Vancouver, ISO, etc.
41

Shiraishi, Y., et J. Sakemi. « A Permeation Router ». IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 6, no 3 (mai 1987) : 462–71. http://dx.doi.org/10.1109/tcad.1987.1270293.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
42

SUN, Zhi-Xin. « Router Anomaly Traffic Detection Based on Modified-CUSUM Algorithms ». Journal of Software 16, no 12 (2005) : 2117. http://dx.doi.org/10.1360/jos162117.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
43

Ji, Wusheng, Li Li et Weiwei Zhou. « Design and Implementation of a RFID Reader/Router in RFID-WSN Hybrid System ». Future Internet 10, no 11 (3 novembre 2018) : 106. http://dx.doi.org/10.3390/fi10110106.

Texte intégral
Résumé :
In order to put Radio Frequency Identification (RFID) and Wireless Sensor Network (WSN) in a hybrid system, this paper presents the design and implementation of a RFID reader/router that can obtain information of both RFID tags and WSN sensor nodes and transmit the information through the WSN to the PC server. The RFID reader and WSN router are combined with both hardware and software. In hardware structure, CC2530 is used as micro controller and RF module for ZigBee wireless communication, and MF RC522 is used as reader RF chip. The software deals with both identity and sensing information and controls the routing. Experiment results show that the RFID reader/router achieves long distance identification, flexibility, scalability, and low cost. It also provides reliable and secured data transmission and broadens the communication range and application scope of RFID readers.
Styles APA, Harvard, Vancouver, ISO, etc.
44

Oxman, Gadi, et Shlomo Weiss. « RIDER : Ring deflection router with buffers ». Design Automation for Embedded Systems 18, no 3-4 (28 février 2014) : 141–55. http://dx.doi.org/10.1007/s10617-014-9130-0.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
45

Chang, Yen-Jung, Yu-Ting Lee, Jhih-Rong Gao, Pei-Ci Wu et Ting-Chi Wang. « NTHU-Route 2.0 : A Robust Global Router for Modern Designs ». IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 29, no 12 (décembre 2010) : 1931–44. http://dx.doi.org/10.1109/tcad.2010.2061590.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
46

Wang, Heng, Bao Guo Wang, Shi Qiang Zhao et Xia Fu Lv. « Design and Implementation of IPv6 Border Router for Wireless Sensor Networks ». Advanced Materials Research 989-994 (juillet 2014) : 4737–41. http://dx.doi.org/10.4028/www.scientific.net/amr.989-994.4737.

Texte intégral
Résumé :
With the rapid development of Internet of things, IPv6 has been introduced into wireless sensor networks and widely used in many areas. It is significant to develop routing devices to connect wireless sensor networks and the Internet based on IPv6 technology. In this paper, we present a 6LoWPAN (IPv6 over Low power Wireless Personal Area Networks) border router scheme. The hardware design and software design are discussed and the experimental results demonstrate the feasibility of the router scheme. By using the proposed border router, the network can achieve end-to-end communications between 6LoWPAN nodes and IPv6 hosts in a universal method.
Styles APA, Harvard, Vancouver, ISO, etc.
47

Ramli, Ayyub, Sriyono Sriyono et Harry Ramza. « Analisa Kecepatan Lalu Lintas Data Jaringan Local Area Network Menggunakan Graphical Network Simulator 3 (GNS-3) ». Electrical Engineering Acta 1, no 1 (14 mai 2021) : 13–19. http://dx.doi.org/10.22236/ate.v1i1.6946.

Texte intégral
Résumé :
Perkembangan teknologi informasi tidak bisa dipisahkan dari perkembangan teknologi dan infrastruktur jaringan komputer. Pembuatan suatu jaringan diperlukan perancangan dan simulasi terlebih dahulu supaya hasilnya sesuai dengan keinginan atau mendapatkan sesuatu yang maksimal. Banyak sekali komponen yang dapat digunakan untuk perancangan seperti router. Router sendiri memiliki banyak system operasi contohnya router MikrotikOS. Jurnal ini untuk merancang dan mensimulasikan jaringan komputer. Perancangan dan simulasi jaringan komputer dapat menggunakan aplikasi Graphical Network Simulator 3(GNS3). GNS3 adalah software simulasi jaringan komputer berbasis GUI yang mirip dengan Cisco Packet Tracer. Namun pada GNS3 memungkinkan simulasi jaringan yang komplek, karena menggunakan operating system asli dari perangkat jaringan seperti cisco, mikrotik dan juniper. Sehingga kita berada kondisi lebih nyata dalam mengkonfigurasi router langsung daripada di Cisco Packet Tracer. Berbeda dengan Cisco Packet Tracer, pada GNS3 harus menginstal terlebih dahulu system operasi dari router itu sendiri yaitu router MikrotikOS maupun CiscoIOS. Di dalam penulisan ini akan dibahas mengenai bagaimana merancang dan mensimulasikan jaringan komputer menggunakan aplikasi GNS3 dengan konfigurasi yang baik dan benar sehingga dapat diterapkan dengan baik.
Styles APA, Harvard, Vancouver, ISO, etc.
48

SUN, Zhi-Xin. « A Router Anomaly Traffic Filter Algorithm Based on Character Aggregation ». Journal of Software 17, no 1 (2006) : 295. http://dx.doi.org/10.1360/jos170295.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
49

Dhamdhere, Amogh, et Constantine Dovrolis. « Open issues in router buffer sizing ». ACM SIGCOMM Computer Communication Review 36, no 1 (10 janvier 2006) : 87–92. http://dx.doi.org/10.1145/1111322.1111342.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
50

So, Won, Ashok Narayanan, David Oran et Mark Stapp. « Named data networking on a router ». ACM SIGCOMM Computer Communication Review 43, no 4 (19 septembre 2013) : 495–96. http://dx.doi.org/10.1145/2534169.2491699.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Software router » pour d’autres types de sources :
Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie