Bibliographies thématiques / SINGLE EDGE-NOTCHED BEAM

Littérature scientifique sur le sujet « SINGLE EDGE-NOTCHED BEAM »

Auteur : Grafiati
Publié le 16 janvier 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « SINGLE EDGE-NOTCHED BEAM ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "SINGLE EDGE-NOTCHED BEAM"

1

Špaková, Jana, et Ján Dusza. « Comparison of R-Curve Behavior of Si3N4 Measured by Indentation Method and Single-Edge V-Notched Beam Technique (SEVNB) ». Key Engineering Materials 409 (mars 2009) : 308–12. http://dx.doi.org/10.4028/www.scientific.net/kem.409.308.

Texte intégral
Résumé :
Study compare R-curve behaviour of silicon nitride obtained using Vickers indented beam specimens and single edge V-notched beam (SEVNB). R-curve measurement realized by Vickers indented beam was reported by Krause. Crack growth using single edge V-notched beam was observed in situ. The indentation experiments, in comparison with SEVNB method revealed higher R-curve values (KR=3.3 – 4.8 MPa.m1/2). The discrepancy in the R-curve results is attributed to inaccuracy related to the determination of indentation toughness. The indentation fracture toughness may include the aspects of crack opening behaviour, residual indentation stress intensity.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Zhou, Wu, Jinxin Huang, Wei Huang et Dahsin Liu. « Dynamic fracture testing of polymethyl-methacrylate (PMMA) single-edge notched beam ». Polymer Testing 91 (novembre 2020) : 106833. http://dx.doi.org/10.1016/j.polymertesting.2020.106833.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Lu, Wen Yan. « Failure Simulation of Single-Edge Notched Concrete Beam under Dynamic Tensile Loading ». Applied Mechanics and Materials 638-640 (septembre 2014) : 333–37. http://dx.doi.org/10.4028/www.scientific.net/amm.638-640.333.

Texte intégral
Résumé :
Crack growth of concrete beam under dynamic tensile loading is a typical discontinuous problem. It is difficult to realize the process of crack propagation using the conventional finite element method, but the extended finite element method (XFEM) is an effective method to analyze the fracture developed in recent years. This paper introduces the basic principle of XFEM and the analysis method of simulating concrete cracking and crack propagation with XFEM. At the end the crack expansion process of the concrete specimen with initial crack and dynamic load is done. The influence of crack propagation on concrete beam stresses and displacements and the crack propagation laws under dynamic tension is studied. The case shows the unique advantage of XFEM in the crack propagation analysis field.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Bai, Haoran, Zhanyu Wang, Sangyu Luo, Zhaoliang Qu et Daining Fang. « A modified single edge V-notched beam method for evaluating surface fracture toughness of thermal barrier coatings ». Applied Mathematics and Mechanics 44, no 5 (23 avril 2023) : 693–710. http://dx.doi.org/10.1007/s10483-023-3001-6.

Texte intégral
Résumé :
AbstractThe surface fracture toughness is an important mechanical parameter for studying the failure behavior of air plasma sprayed (APS) thermal barrier coatings (TBCs). As APS TBCs are typical multilayer porous ceramic materials, the direct applications of the traditional single edge notched beam (SENB) method that ignores those typical structural characters may cause errors. To measure the surface fracture toughness more accurately, the effects of multilayer and porous characters on the fracture toughness of APS TBCs should be considered. In this paper, a modified single edge V-notched beam (MSEVNB) method with typical structural characters is developed. According to the finite element analysis (FEA), the geometry factor of the multilayer structure is recalculated. Owing to the narrower V-notches, a more accurate critical fracture stress is obtained. Based on the Griffith energy balance, the reduction of the crack surface caused by micro-defects is corrected. The MSEVNB method can measure the surface fracture toughness more accurately than the SENB method.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Kim, Jae Hoon, Duck Hoi Kim, Nam Su Rho, Young Shin Lee, Song Heo Koo et Soon Il Moon. « An Evaluation of Fracture Toughness of Glass-Filled Ceramic Using Notched Specimen ». Key Engineering Materials 326-328 (décembre 2006) : 927–30. http://dx.doi.org/10.4028/www.scientific.net/kem.326-328.927.

Texte intégral
Résumé :
The objective of this study is to evaluate the mechanical properties of static, quasidynamic and dynamic fracture toughness of glass-filled ceramic as promising structural material for a dome port cover of a ramjet engine system. Static and quasi-dynamic tests were carried out using SEPB (Single Edge Pre-cracked Beam) specimens. Static and dynamic fracture toughness tests were also performed using ASTM and strain gage methods with SENB (Single Edge Notched Beam) specimens machined with various notch radii. The critical notch radius was evaluated. Below the critical notch radius, the static fracture toughness of the SENB specimen well agreed with that of the SEPB specimen.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Nindhia, Tjokorda Gde Tirta, et Tanja Lube. « Single Edge Precrack V-Notched Beam (SEPVNB) Fracture Toughness Testing on Silicon Nitride ». Materials Science Forum 962 (juillet 2019) : 205–9. http://dx.doi.org/10.4028/www.scientific.net/msf.962.205.

Texte intégral
Résumé :
The previous Measurement of fracture toughness test by using bright indentation for precracked beam method (ASTM C1421) was found difficult to be carried out due to difficulty in precrack generation and measurement of the crack size. In this research single edge precrack V-notch beam (SEPVNB) is introduced as an alternative to solve the problem from previous standardized method. A real crack that can created with referred size is recognized as the best condition for fracture toughness test. The material prepared for this purpose was silicon nitride (Si3N4) produced by CeramTec (Plochingen, Germany) under the name SL200 B. It is a gas pressure sintered ceramic containing 3 wt.% Al2O3 and 3 wt.% Y2O3. The V Notch was prepared by using razor blade with diamond paste following ISO/FDIS 23146 standard preparation with more addition on precrack introduction. The precrack was introduced by so called opposite roller loading. The fracture toughness test was carried out by following procedure in ISO/FDIS 23146 . The result then was compared for validation with both single edge V-notch beam standard (ISO/FDIS 23146 ) and Surface crack in Flexure SCF (ASTM C 1421). The result of fracture toughness by using method that is introduce in this research is found 5.8270.275 MPa1/2 which is close to the result of SCF (5.335 0.222 MPa1/2). Meanwhile the value of fracture toughness by using V-notch beam is 4.9130.098 MPa1/2
Styles APA, Harvard, Vancouver, ISO, etc.
7

AWAJI, Hideo, Tadao WATANABE, Tatsuya YAMADA, Yoshihisa SAKAIDA, Hiromiti TAMIYA et Heizaburo NAKAGAWA. « Evaluation of fracture toughness by a single-edge V-notched beam method. » Transactions of the Japan Society of Mechanical Engineers Series A 56, no 525 (1990) : 1148–53. http://dx.doi.org/10.1299/kikaia.56.1148.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Petersen, DR, RE Link, MP Wagoner, WG Buttlar et GH Paulino. « Development of a Single-Edge Notched Beam Test for Asphalt Concrete Mixtures ». Journal of Testing and Evaluation 33, no 6 (2005) : 12579. http://dx.doi.org/10.1520/jte12579.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Awaji, Hideo, et Yoshihisa Sakaida. « V-Notch Technique for Single-Edge Notched Beam and Chevron Notch Methods ». Journal of the American Ceramic Society 73, no 11 (novembre 1990) : 3522–23. http://dx.doi.org/10.1111/j.1151-2916.1990.tb06490.x.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Tatarko, Peter, Zdeněk Chlup et Ján Dusza. « Microstructure, Fracture and Damage Mechanisms in Rare-Earth Doped Silicon Nitride Ceramics ». Key Engineering Materials 465 (janvier 2011) : 93–96. http://dx.doi.org/10.4028/www.scientific.net/kem.465.93.

Texte intégral
Résumé :
Influence of rare-earth oxide additives on the strength, fracture toughness and tribological behaviour of hot-pressed Si3N4 and Si3N4/SiC micro/nano-composites has been investigated. Four-point bending mode and ball on disc methods have been used for strength and wear tests and Single-Edge V-Notched Beam, Chevron Notched Beam, Indentation Strength and Indentation Fracture techniques for fracture toughness measurement. Fractography has been used to characterize strength limiting defects, fracture micromechanisms and damage mechanisms during the wear test. The strength values were strongly influenced by the present processing flaws. Wear behavior is significantly influenced by the chemical composition and by the microstructure of the materials.
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "SINGLE EDGE-NOTCHED BEAM"

1

坂井田, 喜久, Yoshihisa SAKAIDA, 啓介 田中 et Keisuke TANAKA. « 多孔質セラミックスの破壊靭性評価 ». 日本機械学会, 2001. http://hdl.handle.net/2237/9161.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

SAKAIDA, Yoshihisa, et Keisuke TANAKA. « Evaluation of Fracture Toughness of Porous Ceramics ». The Japan Society of Mechanical Engineers, 2003. http://hdl.handle.net/2237/9181.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Baliarsingh, Avaya Kumar. « Prediction of fatigue crack propagation life in single edge notched beams using exponential model ». Thesis, 2013. http://ethesis.nitrkl.ac.in/5385/1/211ME1344.pdf.

Texte intégral
Résumé :
Metal beams are extensively used in structures, automobile sectors and machine components. Some of their applications include connecting rod of IC engine, shafts, axles, and gears, structures members of bridges and also components of machines. Most of them experience fluctuating or cyclic load condition in their service life‟s such loading conditions may initiate a crack and cause fatigue crack growth. The monitoring and modeling of fatigue crack growth are necessary for the stability and safety of machines and structures. In the present investigation an attempt has been made to develop a fatigue life prediction methodology by using an Exponential Model in single edge notched (SEN) cracked beams. The predicted results are compared with experimental crack growth data. It has been observed that the results obtained from the models are in good agreement with experimental data.
Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "SINGLE EDGE-NOTCHED BEAM"

1

Chen, Chun Hong, et Hideo Awaji. « Novel Estimation of Critical Frontal Process Zone of Ceramics by a Single-Edge V-Notched-Beam Technique ». Dans High-Performance Ceramics III, 1745–50. Stafa : Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-959-8.1745.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Li, Hewenxuan, et David Chelidze. « Fatigue Damage of a Single-Edge Notched Beam Specimen Under Variable Amplitude Loading with Similar Probabilistic and Cycle Counting Statistics ». Dans Nonlinear Structures & ; Systems, Volume 1, 301–5. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-47626-7_44.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Rahul, G. R., V. Jayaram et S. Bose. « Dependence of Crack Velocity on Stress Intensity Factor in PMMA Using Single-Edge-Notched Clamped Beams ». Dans Advances in Structural Integrity, 205–14. Singapore : Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-7197-3_18.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "SINGLE EDGE-NOTCHED BEAM"

1

Dai, Qingli, et Kenny Ng. « Damage investigation of single-edge notched beam tests with concrete specimens using acoustic emission techniques ». Dans SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, sous la direction de Tzu Yang Yu, Andrew L. Gyekenyesi, Peter J. Shull, Aaron A. Diaz, H. Felix Wu et A. Emin Aktan. SPIE, 2013. http://dx.doi.org/10.1117/12.2013879.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Wagoner, M. P., W. G. Buttlar et G. H. Paulino. « Development of a Single-Edge Notched Beam Test for the Study of Asphalt Concrete Fracture ». Dans Geo-Frontiers Congress 2005. Reston, VA : American Society of Civil Engineers, 2005. http://dx.doi.org/10.1061/40776(155)11.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Gražulytė, Judita, et Audrius Vaitkus. « Analysis of Methods and Criteria for Evaluation of Bitumen Performance at Low Temperatures ». Dans Environmental Engineering. VGTU Technika, 2017. http://dx.doi.org/10.3846/enviro.2017.137.

Texte intégral
Résumé :
Thermal cracking is the dominant pavement failure in the cold regions. After each winter, the newly appeared cracks have to be sealed. However, after a few years depending on the sealing method the previously sealed cracks have to be resealed. It results in high maintenance budget and human resources. The appropriate bitumen selection on the basis of bitumen performance at low temperatures can reduce the effect of thermal cracking. For this purpose, number of methods are developed such as Fraass test, bending beam rheometer (BBR) test, direct tension (DT) test, asphalt binder cracking device (ABCD), dynamic shear rheometer using 4 mm diameter parallel plates (4-mm DSR) test, single-edge-notched bending (SENB) test, doubleedge- notched tension (DENT) test and spectral analysis of acoustic emission (AE). This paper presents the analysis of different tests for the evaluation of the bitumen performance at low temperatures, highlights their advantages and disadvantages and gives their limiting criteria. These limiting criteria are usually used to determine the critical cracking temperature, which is defined as the lowest temperature at which bitumen can withstand induced thermal stresses.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Choi, Seong-Min, Masato Okamoto et Hideo Awaji. « A Novel Technique for Estimation of Critical Frontal Process Zone Size in Ceramics ». Dans ASME Turbo Expo 2002 : Power for Land, Sea, and Air. ASMEDC, 2002. http://dx.doi.org/10.1115/gt2002-30508.

Texte intégral
Résumé :
A novel technique for estimating the critical size of the frontal process zone in ceramics was proposed using a single-edge V-notched beam (SEVNB) test method. A three-point flexure test was carried out on a silicon nitride and two kinds of graphite test specimens with sharp V-shaped notches whose depths varied from 20 to 1,500 μm. The critical local stress was calculated at a critical distance from the notch tip. The critical size of the frontal process zone was determined as the distance between the notch tip and the point where the critical local stress had the same value as the flexural strength of test specimens without notches. The relationship among the critical size of the frontal process zone, the fracture toughness, and the flexural strength was discussed.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Furmanski, Jevan, Peter Sarosi, Cary Marzinsky, Don Carpenter et Neeraj Thirumalai. « Plastic Constraint-Matched Pin-Loaded SENT Specimen for Fracture Analysis of Radially Growing Longitudinal Cracks in Thin-Walled Piping ». Dans 2020 13th International Pipeline Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/ipc2020-9789.

Texte intégral
Résumé :
Abstract In recent years increased attention has been given to the transferability of standardized fracture test data to thin-walled pressurized equipment. For smaller diameter piping, for example, standard test specimens loaded in “hoop” tension are not possible due to pipe curvature and thinner wall thickness (often less than 1/3 inch). Further, it is not clear that standardized fracture specimens produce transferrable results to the seam weld fracture problem due to low plastic constraint, which is exacerbated in thin wall pipe. Single-edge notched tension (SENT) specimens were fabricated by extracting a segment pipe wall and finishing to a parallel piped incorporating nearly all the wall thickness. These segments were electron beam welded to low carbon steel grip ends to produce only localized heat affected zone without affecting the test section. The result is a nearly ideal pin-loaded SENT specimen for radial fracture testing. This geometry was evaluated with 2D and 3D nonlinear finite element analysis in Abaqus, and plastic constraint matching was evaluated compared to a thin-walled pipe under internal pressure with a radially growing crack. A nearly ideal plastic constraint match between the pin-loaded SENT and radial seam weld crack was confirmed up to about 500 psi-in, which is substantially beyond a typical JIc in the X52 steel used in the analysis. Thus, pinned SENT testing is recommended for evaluation of radial fracture in thin-walled piping.
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « SINGLE EDGE-NOTCHED BEAM » pour d’autres types de sources :
Articles de revues
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie