Littérature scientifique sur le sujet « Simulateur DESSIS »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Simulateur DESSIS ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Simulateur DESSIS"
Praditasari, Wibby Aldryani Astuti, Dananjaya Ariateja, Uvi Desi Fatmawati, Herwin Melyanus Hutapea, Hendrana Tjahjadi, Agus Sunardi, Muhammad David, Angelita Friskilla et Pandhu Dewanata. « The Design of Simulation Interface G2 COMBAT Pistol Cal. 9 mm with Pimp My Gun Simulator ». Jurnal Otomasi Kontrol dan Instrumentasi 15, no 2 (2023) : 27–34. http://dx.doi.org/10.5614/joki.2023.15.2.3.
Texte intégralWettstein, Andreas, Oleg Penzin et Eugeny Lyumkis. « Integration of the Density Gradient Model into a General Purpose Device Simulator ». VLSI Design 15, no 4 (1 janvier 2002) : 751–59. http://dx.doi.org/10.1080/1065514021000012363.
Texte intégralHidayat, Taufik, Andhika Estiyono, Arie Kurniawan et Ari Dwi Krisbianto. « Desain Workstation Dental Simulator untuk Laboratorium Fakultas Kedokteran Gigi ». Jurnal Desain Idea : Jurnal Desain Produk Industri Institut Teknologi Sepuluh Nopember Surabaya 19, no 2 (4 novembre 2020) : 70. http://dx.doi.org/10.12962/iptek_desain.v19i2.7947.
Texte intégralChen, Bin, Yin Tang Yang, Xuan Rong Xie et Ning Wang. « Primary Modeling and Survey of 4H-SiC Based Metal-Semiconductor-Metal Ultraviolet Sensor with Novel Electrode Structure ». Applied Mechanics and Materials 128-129 (octobre 2011) : 411–16. http://dx.doi.org/10.4028/www.scientific.net/amm.128-129.411.
Texte intégralUtama, Yoga Alif Kurnia, et Dwi Taufik Hidayat. « Desain Metode PID-Simulated Annealing Sebagai Kontrol Temperatur Pada Inkubator Bayi ». JE-Unisla 5, no 1 (30 mars 2020) : 341. http://dx.doi.org/10.30736/je.v5i1.426.
Texte intégralAmarudin, Amarudin. « Desain Keamanan Jaringan Pada Mikrotik Router OS Menggunakan Metode Port Knocking ». Jurnal Teknoinfo 12, no 2 (16 juillet 2018) : 72. http://dx.doi.org/10.33365/jti.v12i2.121.
Texte intégralJurnal, Redaksi Tim. « SIMULASI DESAIN SKEMA ROBOT LINE FOLLOWER PENYIRAM TANAMAN MENGGUNAKAN SIMULATOR SOFTWARE PROTEUS 8 ». PETIR 10, no 2 (16 novembre 2018) : 73–81. http://dx.doi.org/10.33322/petir.v10i2.26.
Texte intégralAriefka Septian Putra, Febi, Nanang Mulyono, Toto Tohir, Dwi Septiyanto et Sofyan Muhammad Ilman. « Desain dan implementasi modul praktikum SCADA untuk otomasi gedung berbasis Ethernet ». JITEL (Jurnal Ilmiah Telekomunikasi, Elektronika, dan Listrik Tenaga) 3, no 3 (9 octobre 2023) : 221–34. http://dx.doi.org/10.35313/jitel.v3.i3.2023.221-234.
Texte intégralBudisantoso, Heri Triluqman, NFn Mulyoto et Leo Agung Sutimin. « PENGEMBANGAN MODEL APLIKASI SIMULATOR KAMERA VIDEO BERBASIS ANDROID ». Jurnal Kwangsan 6, no 1 (30 juin 2018) : 58. http://dx.doi.org/10.31800/jkwangsan-jtp.v6n1.p58--67.
Texte intégralBudisantoso, Heri Triluqman, NFn Mulyoto et Leo Agung Sutimin. « PENGEMBANGAN MODEL APLIKASI SIMULATOR KAMERA VIDEO BERBASIS ANDROID ». Jurnal Kwangsan 6, no 1 (30 juin 2018) : 74. http://dx.doi.org/10.31800/jtp.kw.v6n1.p74--91.
Texte intégralThèses sur le sujet "Simulateur DESSIS"
Vedel, Charlotte. « Increasing lifting performances : Biomechanics for an optimized training ». Electronic Thesis or Diss., Lyon, INSA, 2023. http://www.theses.fr/2023ISAL0054.
Texte intégralMore than sports, weightlifting and powerlifting are widely used in fitness/resistance training for sport performance. As they both consist of lifting additional weights they must be well executed to avoid injuries and enhance fitness and performance. To date, pieces of advice from experienced or graduated or self - proclaimed coaches, swarm in gyms and on the web, but very little are based on scientific knowledge. The same technical instructions are often given to men and women with different anthropometry and training history. As they are not individualized, these instructions could be at best suboptimal for most athletes, not enabling them to express their full potential and, at worst, dangerous and causing injuries. The central objective of our project is the development and validation of an optimised personalized virtual human model. On the one hand, a virtual mechanical model of an athlete squatting was numerically designed and set into motion by the development of a genetic algorithm minimizing a cost function. On the other hand, an experiment was designed to measure the squat kinematics of experienced athletes. The results of the simulation and experimentation were then confronted, the differences explained and areas of improvement listed
Mardan, Milad. « Hot tearing study of aluminium alloys above the solidus temperature with the aid of a direct chill casting surface simulator (DCSS) = : Étude sur la fissuration à chaud d'alliages d'aluminium au-dessus du solidus à l'aide d'un simulateur de surface de la coulée semi-continue ». Thesis, Université Laval, 2011. http://www.theses.ulaval.ca/2011/27824/27824.pdf.
Texte intégralHot tearing is a severe defect in aluminum castings which is produced during solidification when a certain amount of liquid phase remains and weakens the tensile resistance of the alloy. In direct chill casting of aluminum alloys, hot tears initiate at the surface of sheet ingots just after the primary cooling zone, where the microstructure is particularly vulnerable. In order to study the thermomechanical properties of these alloys and the effect of grain refiners on their thermo-mechanical behaviour, tensile tests were carried out on specimens in the semi-solid state (~90-95% solid fraction) and at low strain rates using an apparatus called Direct Chill Surface Simulator (DCSS). This apparatus is an instrumented rig test reproducing the conditions prevailing during the primary cooling stage of the DC casting process. The thermomechanical behavior of solidifying shells and the hot tear formation under applied tensile loads was analyzed and the occurrence of hot tearing was observed. The temperature in different locations of the casting, applied load and surface strain were monitored during the tensile tests conducted on aluminum alloys AA5182, AA6111 and AA3104. The microstructure of the tested specimens was examined using the optical microscope to evaluate the columnar or equiaxed aspect of grains and their effect on the thermomechanical response of the alloy. A special emphasis has been given to the evaluation of the solid fraction existing in the castings at the start of the tensile tests, taking into account the local temperature, thermal gradient and cooling rates experienced. It was found that excessive grain refiner additions decreased the strength of solidifying shells because of the increased level of porosity induced by easier nucleation of new phases (gas included). It was also observed that cooling rates increased with the level of grain refiner, a phenomenon that was associated to the higher number of contact points with the mould obtained with numerous small equiaxed grains. Finally, the concept of a stress based criterion for hot tearing was reinforced by the strengths obtained on not grain refined AA5182 and AA6111 alloys showing similar solid fraction near the surface, but with significantly different grain sizes.
Bernardini, Gabriele. « A “behavioural design” approach for architectural spaces design. Development of tools and solutions for fire and earthquake emergency evacuation at different scales ». Doctoral thesis, Università Politecnica delle Marche, 2016. http://hdl.handle.net/11566/242972.
Texte intégralOccupants' safety in architectural spaces during an emergency is essentially connected to the evacuation process. Current strategies are influenced by a schematic and deterministic approach: it is supposed that building layout and wayfinding systems can directly induce individuals’ behaviors. Interventions on buildings could be enough for reducing people risk, because occupants would surely behave in “the correct way” (e.g.: using right paths). This approach seems to exclude behavioral aspects: experiments demonstrate enormous differences between theoretical and real behaviors in evacuation. Same problems are noticed at both small (building) and wide (urban) scale. Hence, this study focuses on a behavioral point of view and defines a “behavioral design” (BD) approach for increasing people’s safety in architectural spaces. BD is aimed at adapting architectural spaces depending on human behaviors! Hence, method phases include: understanding behaviors in emergency through experiments/real world events; defining and validating evacuation simulation model; analyzing emergency processes through simulator; proposing design solutions based on retrieved critical behaviors and verifying their impact by simulator or drills. The BD method effectiveness is shown by 2 cases. Firstly, an earthquake pedestrians’ evacuation simulator is developed. The model is able to represent man-environment interferences in damaged scenarios and can be used for evaluating vulnerability-reduction interventions on buildings, urban planning and rescuers’ management strategies. The second case concerns wayfinding systems definition in building heritage (theater). Systems are defined so as to address correct evacuation path choices, by reducing overall risks with no architectural modifications. This issue is considerably significant in these buildings because of preservation principles and minimum intervention criterion. This work was developed in accordance with “TAV-progetto SHELL-O.R.4.4” activities.
Actes de conférences sur le sujet "Simulateur DESSIS"
Mathur, Bhvanesh P., Khalil I. Arshak, Arousian Arshak et Declan McDonagh. « DESIM : a simulator for the DESIRE process ». Dans SPIE's 1994 Symposium on Microlithography, sous la direction de Omkaram Nalamasu. SPIE, 1994. http://dx.doi.org/10.1117/12.175364.
Texte intégralPato, Miguel, Kevin Alonso, Stefan Auer, Jim Buffat, Emiliano Carmona, Stefan Maier, Rupert Müller, Patrick Rademske, Uwe Rascher et Hanno Scharr. « Fast Machine Learning Simulator of At-Sensor Radiances for Solar-Induced Fluorescence Retrieval with DESIS and Hyplant ». Dans IGARSS 2023 - 2023 IEEE International Geoscience and Remote Sensing Symposium. IEEE, 2023. http://dx.doi.org/10.1109/igarss52108.2023.10281579.
Texte intégralOliveira, Juan, et Wilson Prata. « Pesquisa de UX em jogos de Realidade Virtual : desafios e lições aprendidas ». Dans XVII Simpósio Brasileiro de Fatores Humanos em Sistemas Computacionais. Sociedade Brasileira de Computação (SBC), 2018. http://dx.doi.org/10.5753/ihc.2018.4180.
Texte intégralPrieto, Gustavo A., et Rosângela D. Penteado. « Utilização de Padrões de Projeto de Software na Reengenharia de Sistemas ». Dans Anais Estendidos do Simpósio Brasileiro de Engenharia de Software. Sociedade Brasileira de Computação - SBC, 2000. http://dx.doi.org/10.5753/sbes_estendido.2000.24207.
Texte intégralLunabba, Torsten, Milla Ranta, Kimmo Julku, Heikki Lilja et Timo Tirkkonen. « Evaluating the Residual Lifetime of Road Bridges Through Simulation ». Dans IABSE Conference, Copenhagen 2018 : Engineering the Past, to Meet the Needs of the Future. Zurich, Switzerland : International Association for Bridge and Structural Engineering (IABSE), 2018. http://dx.doi.org/10.2749/copenhagen.2018.008.
Texte intégralSantos, Danilo, Paulo Afonso Júnior et Heitor Costa. « Uma Abordagem Para Reestruturação de Sistemas de Software Orientados a Objetos ». Dans XV Simpósio Brasileiro de Qualidade de Software. Sociedade Brasileira de Computação - SBC, 2016. http://dx.doi.org/10.5753/sbqs.2016.15141.
Texte intégralA. D. Meneghin, Cândida, Abilio M. Variz, Igor D. Melo et José Luiz Rezende Pereira. « Análise Comparativa dos Modelos de Linha de Transmissão no Domínio Harmônico ». Dans Congresso Brasileiro de Automática - 2020. sbabra, 2020. http://dx.doi.org/10.48011/asba.v2i1.1328.
Texte intégralLucas da Silva, Weberti, Francisco C. R. Coelho et Wesley Peres. « Análise Comparativa entre PSO e Gradiente Descendente para o Problema do Despacho de Geração Distribuída ». Dans Simpósio Brasileiro de Sistemas Elétricos - SBSE2020. sbabra, 2020. http://dx.doi.org/10.48011/sbse.v1i1.2492.
Texte intégralGISSINGER, JACOB R., et KRISTOPHER E. WISE. « BUILDING AND BREAKING CARBON COMPOSITES WITH REACTER ». Dans Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36461.
Texte intégralRapports d'organisations sur le sujet "Simulateur DESSIS"
Hodul, M., H. P. White et A. Knudby. A report on water quality monitoring in Quesnel Lake, British Columbia, subsequent to the Mount Polley tailings dam spill, using optical satellite imagery. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/330556.
Texte intégral