Littérature scientifique sur le sujet « Sensors and actuators placement »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Sensors and actuators placement ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Sensors and actuators placement"
CHEN, KEVIN K., et CLARENCE W. ROWLEY. « H2 optimal actuator and sensor placement in the linearised complex Ginzburg–Landau system ». Journal of Fluid Mechanics 681 (20 juin 2011) : 241–60. http://dx.doi.org/10.1017/jfm.2011.195.
Texte intégralŠolek, Peter, et Marek Maták. « An Active Control of the Thin-Walled Mechanical Systems ». Applied Mechanics and Materials 611 (août 2014) : 22–31. http://dx.doi.org/10.4028/www.scientific.net/amm.611.22.
Texte intégralMersch, Johannes, Najmeh Keshtkar, Henriette Grellmann, Carlos Alberto Gomez Cuaran, Mathis Bruns, Andreas Nocke, Chokri Cherif, Klaus Röbenack et Gerald Gerlach. « Integrated Temperature and Position Sensors in a Shape-Memory Driven Soft Actuator for Closed-Loop Control ». Materials 15, no 2 (10 janvier 2022) : 520. http://dx.doi.org/10.3390/ma15020520.
Texte intégralSeyed Sakha, Masoud, et Hamid Reza Shaker. « Optimal sensors and actuators placement for large-scale unstable systems via restricted genetic algorithm ». Engineering Computations 34, no 8 (6 novembre 2017) : 2582–97. http://dx.doi.org/10.1108/ec-04-2016-0138.
Texte intégralJohnson, Marty E., Luiz P. Nascimento, Mary Kasarda et Chris R. Fuller. « The Effect of Actuator and Sensor Placement on the Active Control of Rotor Unbalance ». Journal of Vibration and Acoustics 125, no 3 (18 juin 2003) : 365–73. http://dx.doi.org/10.1115/1.1569946.
Texte intégralSoman, Rohan, Kaleeswaran Balasubramaniam, Ali Golestani, Michał Karpiński, Pawel Malinowski et Wieslaw Ostachowicz. « Actuator placement optimization for guided waves based structural health monitoring using fibre Bragg grating sensors ». Smart Materials and Structures 30, no 12 (1 novembre 2021) : 125011. http://dx.doi.org/10.1088/1361-665x/ac31c4.
Texte intégralHeck, L. P., J. A. Olkin et K. Naghshineh. « Transducer Placement for Broadband Active Vibration Control Using a Novel Multidimensional QR Factorization ». Journal of Vibration and Acoustics 120, no 3 (1 juillet 1998) : 663–70. http://dx.doi.org/10.1115/1.2893881.
Texte intégralGAWRONSKI, W. « SIMULTANEOUS PLACEMENT OF ACTUATORS AND SENSORS ». Journal of Sound and Vibration 228, no 4 (décembre 1999) : 915–22. http://dx.doi.org/10.1006/jsvi.1999.2466.
Texte intégralNandy, Animesh, Debabrata Chakraborty et Mahesh S. Shah. « Optimal Sensors/Actuators Placement in Smart Structure Using Island Model Parallel Genetic Algorithm ». International Journal of Computational Methods 16, no 06 (27 mai 2019) : 1840018. http://dx.doi.org/10.1142/s0219876218400182.
Texte intégralHuang, Xiu Feng, Ming Hong et Hong Yu Cui. « The Optimal Location of Piezoelectric Sensor/Actuator Based on Adaptive Genetic Algorithm ». Applied Mechanics and Materials 635-637 (septembre 2014) : 799–804. http://dx.doi.org/10.4028/www.scientific.net/amm.635-637.799.
Texte intégralThèses sur le sujet "Sensors and actuators placement"
Szczepanski, Robert Walter. « Optimal placement of actuators and sensors for vibration control using genetic algorithms ». Thesis, University of Newcastle Upon Tyne, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.341754.
Texte intégralPotami, Raffaele. « Optimal sensor/actuator placement and switching schemes for control of flexible structures ». Worcester, Mass. : Worcester Polytechnic Institute, 2008. http://www.wpi.edu/Pubs/ETD/Available/etd-042808-124333/.
Texte intégralKeywords: hybrid system, PZT actuators, performance enchancement, actuator placement, actuator switching. Includes bibliographical references (leaves 102-108).
Polyzos, Dimitrios. « "Measuring System Properties & ; Structured Diagnostics for the Selection of Sensors, Actuators Placement & ; Eigenstructure Assignment" ». Thesis, City University London, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.524712.
Texte intégralSuwit, Pulthasthan Information Technology & Electrical Engineering Australian Defence Force Academy UNSW. « Optimal placement of sensor and actuator for sound-structure interaction system ». Awarded by:University of New South Wales - Australian Defence Force Academy. School of Information Technology and Electrical Engineering, 2006. http://handle.unsw.edu.au/1959.4/38741.
Texte intégralJha, Akhilesh K. « Vibration Analysis and Control of an Inflatable Toroidal Satellite Component Using Piezoelectric Actuators and Sensors ». Diss., Virginia Tech, 2002. http://hdl.handle.net/10919/28243.
Texte intégralPh. D.
MURUGAN, JAYA MAHESH. « Vibration monitoring and control of industrial structures ». Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2858351.
Texte intégralBrakna, Mohammed. « Sensor and actuator optimal location for dynamic controller design. Application to active vibration reduction in a galvanizing process ». Electronic Thesis or Diss., Université de Lorraine, 2023. https://docnum.univ-lorraine.fr/ulprive/DDOC_T_2023_0152_BRAKNA.pdf.
Texte intégralThe aims of the present PhD thesis are to determine a model that is both sufficiently accurate and numerically exploitable to propose optimal placement of sensors and actuators for active vibration control in a galvanizing line. A continuous hot-dip galvanizing process consists in covering a metal (here: a steel band) by a protective layer of zinc which avoids the corrosion due to the air. The thickness of this layer must be constant to guarantee the mechanical properties and surface condition of the product. In a galvanizing line, the moving steel strip is heated and then immersed in a liquid zinc bath before being wiped out by nozzles projecting air. The air flow, as well as the rotation of the driving rolls, among other things, creates vibrations affecting the wiping process and thus the regularity of the zinc deposit. Active control is therefore necessary, for example by means of electromagnets placed on either side of the moving steel strip. In a first step, a behavioral model of the steel strip taking into account the presence and propagation of vibrations was obtained by spatial discretization of a partial differential equation. This state space model was validated in simulation and experimentally on a pilot galvanizing line of ArcelorMittal Research in Maizières-lès-Metz. Once this model is established, the objective of the study is to find the optimal placement of sensors, to measure the vibrations of the strip as efficiently as possible, but also of actuators to minimize the amplitude of these vibrations by an appropriate control law. These problems of optimal placement are at the heart of the issues of active vibration control and are found in many fields of application. An optimal placement method based on Gramian maximization has been proposed in order to reduce the impact of disturbances on the system. Different control strategies have been considered such as (i) observed state feedback based on Kalman filter and LQ regulator; and (ii) extended observed state feedback to improve the results by also taking into account the disturbance estimation provided by a PI (proportional-integral) observer. Simulation and experimental results illustrate the thesis contributions
Perini, Efrain Araujo [UNESP]. « Redução de vibrações de rotores utilizando atuadores magnéticos e sistema de controle feedforward ». Universidade Estadual Paulista (UNESP), 2009. http://hdl.handle.net/11449/94510.
Texte intégralFundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Este trabalho apresenta o desenvolvimento de uma análise teórica do desempenho de um sistema de controle ativo utilizando mancais magnéticos como atuadores de não-contato para a redução de vibrações em rotores. São analisados três modelos de rotores, sendo que em um deles aplica-se apenas o controle feedback e os outros são suportados apenas por mancais magnéticos, os quais também são os atuadores do controlador. Assim, Luna arquitetura de controle tipo feedforward é empregada sobreposta ao sistema de controle feedback dos atuadores nestes dois modelos, sendo urna análise realizada em relação ao desempenho do sistema de controle quanto às diferentes geometrias de distribuição de massa acopladas ao eixo do rotor. O enfoque principal deste trabalho é voltado para a análise do desempenho do sistema de controle em função da posição e quantidade dos sensores de erro (onde se deseja minimizar as vibrações) em relação à posição dos atuadores e das forças de excitação. As excitações são do tipo síncronas e sub-síncronas que normalmente aparecem em rotores com elevadas velocidades de rotação, como as turbomáquinas. Também é realizada urna análise das forças de controle necessárias a serem aplicadas pelos atuadores para se obter urna redução dos níveis de vibração do rotor na posição dos sensores de erro do sistema feedforward. A análise é executada empregando modelos de rotores desenvolvidos pelo método da matriz de impedância. Esta pesquisa também apresenta Luna aplicação da técnica de controle Feedforward em acústica, que realiza a depuração da voz para comunicação em ambientes ruidosos.
This research work brings a theoretical analysis of a control system performance that uses magnetic bearings as non-contact actuators to reduce rotor vibrations. It is analyzed three rotor models, in which one of them operates under the feedback control only. The other models are supported by magnetic bearings only, which also are the controller system actuators. Thus, a feedforward control scheme is applied over the feedback control inherent to the AMB control circuit. The analysis is carried out over these two last models regarding to the control performance for different geometry of mass distribution along the rotor. The focus of this work is to analyze the controller performance according to the sensor quantity and placement (where the vibrations are desired to be minimized) regarding to the actuator position and to the exciting forces. The subsynchronous and synchronous excitations are considered here since they frequently occur in high rotating speed rotors, as in the turbomachinery scenario. Also, the control force required by the actuators is monitored according to the sensors placement to reduce the local vibrations level and the analysis was carried out using the impedance matrix rotor modeling. Further, this work brings a modeling and an application of the feedforward active control scheme in the acoustics field used for voice extraction for communication in noisy environments.
Perini, Efrain Araujo. « Redução de vibrações de rotores utilizando atuadores magnéticos e sistema de controle feedforward / ». Ilha Solteira : [s.n.], 2009. http://hdl.handle.net/11449/94510.
Texte intégralAbstract: This research work brings a theoretical analysis of a control system performance that uses magnetic bearings as non-contact actuators to reduce rotor vibrations. It is analyzed three rotor models, in which one of them operates under the feedback control only. The other models are supported by magnetic bearings only, which also are the controller system actuators. Thus, a feedforward control scheme is applied over the feedback control inherent to the AMB control circuit. The analysis is carried out over these two last models regarding to the control performance for different geometry of mass distribution along the rotor. The focus of this work is to analyze the controller performance according to the sensor quantity and placement (where the vibrations are desired to be minimized) regarding to the actuator position and to the exciting forces. The subsynchronous and synchronous excitations are considered here since they frequently occur in high rotating speed rotors, as in the turbomachinery scenario. Also, the control force required by the actuators is monitored according to the sensors placement to reduce the local vibrations level and the analysis was carried out using the impedance matrix rotor modeling. Further, this work brings a modeling and an application of the feedforward active control scheme in the acoustics field used for voice extraction for communication in noisy environments.
Orientador: Luiz de Paula do Nascimento
Coorientador: Vicente Lopes Junior
Banca: Gilberto Pechoto de Melo
Banca: Kátia Luchese Cavalca Dedini
Mestre
Mitwalli, Ahmed Hamdi. « Polymer gel actuators and sensors ». Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9969.
Texte intégralIncludes bibliographical references (p. [351]-361).
by Ahmed Hamdi Mitwalli.
Sc.D.
Livres sur le sujet "Sensors and actuators placement"
K, Kincaid Rex, et Langley Research Center, dir. Optimization strategies for sensor and actuator placement. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1999.
Trouver le texte intégralK, Kincaid Rex, et Langley Research Center, dir. Optimization strategies for sensor and actuator placement. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1999.
Trouver le texte intégralCenter, Langley Research, dir. Optimal control of unsteady stokes flow around a cylinder and the sensor/actuator placement problem. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1998.
Trouver le texte intégralCenter, Langley Research, dir. Optimal control of unsteady stokes flow around a cylinder and the sensor/actuator placement problem. Hampton, Va : National Aeronautics and Space Administration, Langley Research Center, 1998.
Trouver le texte intégralOsada, Yoshihito. Polymer Sensors and Actuators. Berlin, Heidelberg : Springer Berlin Heidelberg, 2000.
Trouver le texte intégralVigna, Benedetto, Paolo Ferrari, Flavio Francesco Villa, Ernesto Lasalandra et Sarah Zerbini, dir. Silicon Sensors and Actuators. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-80135-9.
Texte intégralBusch-Vishniac, Ilene J. Electromechanical Sensors and Actuators. New York, NY : Springer New York, 1999. http://dx.doi.org/10.1007/978-1-4612-1434-2.
Texte intégralBrauer, John R. Magnetic Actuators and Sensors. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2006. http://dx.doi.org/10.1002/0471777714.
Texte intégralBrauer, John R. Magnetic Actuators and Sensors. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118779262.
Texte intégralRupitsch, Stefan Johann. Piezoelectric Sensors and Actuators. Berlin, Heidelberg : Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-57534-5.
Texte intégralChapitres de livres sur le sujet "Sensors and actuators placement"
Khapalov, Alexander Y. « Degenerate Sensors in Source Localization and Sensor Placement Problems ». Dans Mobile Point Sensors and Actuators in the Controllability Theory of Partial Differential Equations, 123–43. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60414-5_8.
Texte intégralGawronski, Wodek K. « Actuator and Sensor Placement ». Dans Dynamics and Control of Structures, 100–128. New York, NY : Springer New York, 1998. http://dx.doi.org/10.1007/978-0-387-21855-7_7.
Texte intégralLi, Xu, Amiya Nayak, David Simplot-Ryl et Ivan Stojmenovic. « Sensor Placement in Sensor and Actuator Networks ». Dans Wireless Sensor and Actuator Networks, 263–94. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470570517.ch10.
Texte intégralGawronski, Wodek. « Balanced sensor and actuator placement ». Dans Balanced Control of Flexible Structures, 107–36. Berlin, Heidelberg : Springer Berlin Heidelberg, 1996. http://dx.doi.org/10.1007/3540760172_5.
Texte intégralUsher, M. J., et D. A. Keating. « Actuators ». Dans Sensors and Transducers, 131–46. London : Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-13345-1_9.
Texte intégralKatebi, Reza, Michael A. Johnson et Jacqueline Wilkie. « Sensors and Actuators ». Dans Advances in Industrial Control, 144–65. London : Springer London, 1999. http://dx.doi.org/10.1007/978-1-4471-0423-0_6.
Texte intégralSciavicco, Lorenzo, et Bruno Siciliano. « Actuators and Sensors ». Dans Modelling and Control of Robot Manipulators, 295–320. London : Springer London, 2000. http://dx.doi.org/10.1007/978-1-4471-0449-0_8.
Texte intégralAamo, Ole Morten, et Miroslav Krstić. « Sensors and Actuators ». Dans Flow Control by Feedback, 179–83. London : Springer London, 2003. http://dx.doi.org/10.1007/978-1-4471-3805-1_6.
Texte intégralMarkley, F. Landis, et John L. Crassidis. « Sensors and Actuators ». Dans Fundamentals of Spacecraft Attitude Determination and Control, 123–81. New York, NY : Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4939-0802-8_4.
Texte intégralGenta, Giancarlo. « Actuators and Sensors ». Dans Introduction to the Mechanics of Space Robots, 427–82. Dordrecht : Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-1796-1_7.
Texte intégralActes de conférences sur le sujet "Sensors and actuators placement"
Kameyama, Masaki, et Hisao Fukunaga. « Optimal Placement of Sensors and Actuators for Modal Measurement/Control of CFRP Laminated Plates ». Dans ASME 2008 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2008. http://dx.doi.org/10.1115/smasis2008-416.
Texte intégralSpäh, Britta, Rudolf Sebastian Schittenhelm et Stephan Rinderknecht. « Optimal Sensor and Actuator Placement for Active Vibration Control Systems ». Dans ASME 2012 Noise Control and Acoustics Division Conference at InterNoise 2012. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ncad2012-0982.
Texte intégralHanagud, S., C. C. Won et M. W. Obal. « Optimal Placement of Piezoceramic Sensors and Actuators ». Dans 1988 American Control Conference. IEEE, 1988. http://dx.doi.org/10.23919/acc.1988.4790034.
Texte intégralTrease, Brian, et Sridhar Kota. « Topology Synthesis of Compliant Systems With Embedded Actuators and Sensors ». Dans ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/detc2008-49688.
Texte intégralAl-Masoud, Nidal, et Tarunraj Singh. « Optimal Actuator/Sensor Placement for Control of Combustion Instabilities ». Dans ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/dsc-24562.
Texte intégralAlnuaimi, Mohammed, Abdulaziz BuAbdulla, Tarcísio Silva, Sumaya Altamimi, Dong-Wook Lee et Mohamed Al Teneiji. « Active Vibration Control of Piezoelectric Beam Using the PID Controller ». Dans ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-70960.
Texte intégralGabbert, U., I. Schulz et C. T. Weber. « Actuator Placement in Smart Structures by Discrete-Continuous Optimization ». Dans ASME 1997 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/detc97/vib-3937.
Texte intégralTrease, Brian P., et Sridhar Kota. « Synthesis of Adaptive and Controllable Compliant Systems With Embedded Actuators and Sensors ». Dans ASME 2006 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/detc2006-99266.
Texte intégralShelley, Franz J., et William W. Clark. « Active Mode Localization in Distributed Parameter Systems With Consideration of Limited Actuator Placement ». Dans ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0575.
Texte intégralSEPULVEDA, A., et L. SCHMIT. « Optimal Placement of Actuators and Sensors in Control Augmented Structural Optimization ». Dans 31st Structures, Structural Dynamics and Materials Conference. Reston, Virigina : American Institute of Aeronautics and Astronautics, 1990. http://dx.doi.org/10.2514/6.1990-1055.
Texte intégralRapports d'organisations sur le sujet "Sensors and actuators placement"
Almeida, Oscar J., Brian G. Dixon, Jill H. Hardin, John P. Sanford et Myles Walsh. High Temperature Smart Sensors and Actuators. Fort Belvoir, VA : Defense Technical Information Center, août 1992. http://dx.doi.org/10.21236/ada256985.
Texte intégralKrulewich, D. A. Handbook of actuators and edge alignment sensors. Office of Scientific and Technical Information (OSTI), novembre 1992. http://dx.doi.org/10.2172/6788910.
Texte intégralMATERIALS SYSTEMS INC CONCORD MA. Cost-Effective Method for Synthesizing Innovative Transducer Materials for Sensors and Actuators. Fort Belvoir, VA : Defense Technical Information Center, juin 1994. http://dx.doi.org/10.21236/ada282339.
Texte intégralTed Quinn et Jerry Mauck. Digial Technology Qualification Task 2 - Suitability of Digital Alternatives to Analog Sensors and Actuators. Office of Scientific and Technical Information (OSTI), septembre 2012. http://dx.doi.org/10.2172/1057681.
Texte intégralCline, Joseph I. Surface Absorption Polarization Sensors (SAPS), Final Technical Report, Laser Probing of Immobilized SAPS Actuators Component. Office of Scientific and Technical Information (OSTI), avril 2010. http://dx.doi.org/10.2172/977056.
Texte intégralBeshouri, Greg. PR-309-14212-R01 Field Demonstration of Fully Integrated NSCR System. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), janvier 2019. http://dx.doi.org/10.55274/r0011545.
Texte intégralRatmanski, Kiril, et Sergey Vecherin. Resilience in distributed sensor networks. Engineer Research and Development Center (U.S.), octobre 2022. http://dx.doi.org/10.21079/11681/45680.
Texte intégralBeshouri. PR-309-08208-R01 A Survey of Diagnostics Techniques for Compressor Engines. Chantilly, Virginia : Pipeline Research Council International, Inc. (PRCI), septembre 2009. http://dx.doi.org/10.55274/r0010730.
Texte intégralDasberg, Shmuel, Jan W. Hopmans, Larry J. Schwankl et Dani Or. Drip Irrigation Management by TDR Monitoring of Soil Water and Solute Distribution. United States Department of Agriculture, août 1993. http://dx.doi.org/10.32747/1993.7568095.bard.
Texte intégralTarko, Andrew P., Mario A. Romero, Vamsi Krishna Bandaru et Cristhian Lizarazo. TScan–Stationary LiDAR for Traffic and Safety Applications : Vehicle Interpretation and Tracking. Purdue University, 2022. http://dx.doi.org/10.5703/1288284317402.
Texte intégral