Littérature scientifique sur le sujet « Remelting process »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Remelting process ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Remelting process"
Mróz, M., W. Orłowicz et M. Tupaj. « Geometry of Remeltings and Efficiency of the Surface Remelting Process Applied to Cobalt Alloy Castings ». Archives of Foundry Engineering 13, no 2 (1 juin 2013) : 95–98. http://dx.doi.org/10.2478/afe-2013-0044.
Texte intégralTrytek, Andrzej Stanisław, Mirosław Tupaj, Ján Majerník, Štefan Gašpár, Wiktoria Zbyrad-Kołodziej et Karol Łysiak. « Surface Remelting of Mold Inserts Made of NC11 Steel ». Journal of Casting & ; Materials Engineering 4, no 1 (31 mars 2020) : 9–15. http://dx.doi.org/10.7494/jcme.2020.4.1.9.
Texte intégralArh, Boštjan, Bojan Podgornik et Jaka Burja. « Electroslag remelting : A process overview ». Materiali in tehnologije 50, no 6 (12 décembre 2016) : 971–79. http://dx.doi.org/10.17222/mit.2016.108.
Texte intégralDing, Wan Wu, Jiang Tao Zhu, Wen Jun Zhao et Tian Dong Xia. « Microstructure Evolution of Al-Ti-C Alloy Wires during Remelting Process ». Advanced Materials Research 652-654 (janvier 2013) : 1119–23. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.1119.
Texte intégralŠturm, Roman, et Janez Grum. « Influence of Laser Remelting Process on Strain and Residual Stresses in Nodular Iron ». Materials Science Forum 681 (mars 2011) : 188–93. http://dx.doi.org/10.4028/www.scientific.net/msf.681.188.
Texte intégralYi, Rong Xi, Xiao Qiu Zheng, Shi Kun Xie et Xiu Yan Guo. « Study on the Remelting Process of Rare Earth Al-4.5Cu ». Applied Mechanics and Materials 66-68 (juillet 2011) : 1854–57. http://dx.doi.org/10.4028/www.scientific.net/amm.66-68.1854.
Texte intégralGuo, Hua Feng, Tao Sun, Zhi Li et Ju Li Li. « Influence of Process Parameters on Temperature Field in Laser Remelting Coating Prepared by Plasma Spraying on Titanium Alloy Surface ». Applied Mechanics and Materials 197 (septembre 2012) : 802–7. http://dx.doi.org/10.4028/www.scientific.net/amm.197.802.
Texte intégralINOUYE, Michio. « Present Status of Electroslag Remelting Process ». Tetsu-to-Hagane 73, no 2 (1987) : 233–41. http://dx.doi.org/10.2355/tetsutohagane1955.73.2_233.
Texte intégralDONG, Yan-wu, Zhou-hua JIANG et Zheng-bang LI. « Mathematical Model for Electroslag Remelting Process ». Journal of Iron and Steel Research, International 14, no 5 (septembre 2007) : 7–30. http://dx.doi.org/10.1016/s1006-706x(07)60065-x.
Texte intégralDong, Yan-wu, Zhou-hua Jiang et Zheng-bang Li. « Mathematical Model for Electroslag Remelting Process ». Journal of Iron and Steel Research International 14, no 5 (mai 2007) : 7–12. http://dx.doi.org/10.1016/s1006-706x(08)60042-4.
Texte intégralThèses sur le sujet "Remelting process"
Hernández-Morales, José Bernardo. « Electromagnetic stirring with alternating current during electroslag remelting ». Thesis, University of British Columbia, 1988. http://hdl.handle.net/2429/28385.
Texte intégralApplied Science, Faculty of
Materials Engineering, Department of
Graduate
Wani, Nitin Yashwant. « Simulation of thermal stresses in vacuum arc remelting process ». Ohio : Ohio University, 1995. http://www.ohiolink.edu/etd/view.cgi?ohiou1178820121.
Texte intégralPolton, Richard. « Numerical grid generation and its application in the solution of a model of the Vacuum-Arc Remelting (VAR) process ». Thesis, University of Southampton, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.323918.
Texte intégralMUCSI, CRISTIANO S. « Estudo sobre o processo V.A.R. (Vacuum Arc Remelting) escala de laboratorio ». reponame:Repositório Institucional do IPEN, 1996. http://repositorio.ipen.br:8080/xmlui/handle/123456789/10472.
Texte intégralMade available in DSpace on 2014-10-09T14:06:54Z (GMT). No. of bitstreams: 1 02949.pdf: 9168361 bytes, checksum: 474a2e1dcf103e26b6863b7d40ff33a1 (MD5)
Dissertacao (Mestrado)
IPEN/D
Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP
Décultot, Léa. « Étude et modélisation du procédé de refusion par plasma d’arc en creuset froid (PAMCHR) d’alliages de titane pour des applications aéronautiques ». Electronic Thesis or Diss., Université de Lorraine, 2021. http://www.theses.fr/2021LORR0031.
Texte intégralThe recycling of titanium scraps can be achieved using the Plasma Arc Melting Cold Hearth Refining (PAMCHR) process with the aim of producing aeronautical titanium alloy ingots. In this manuscript, the research work focuses on the refining stage of the process where the liquid is transported in a horizontal copper water-cooled crucible. This important step takes place downstream the melting of the charge and upstream the casting of liquid titanium into the ingot mold crucible. Plasma torches are used as heat source of PAMCHR process, which is conducted under an atmosphere of inert gas. A three-dimensional modeling of the thermo-hydrodynamic flow of the titanium alloy has been set up based on Ansys-Fluent CFD software. The purpose of this tool, named PAM3D, is to improve our understanding of the liquid titanium behavior within the refining crucible. A large number of user functions have been integrated into the model to describe, among other mechanisms, the thermal and momentum transferred from the plasma plume to the surface of the liquid bath. The analysis of these transfers is essential for modeling the process. They are obtained by a study coupling melting tests, carried out in a pilot PAMCHR furnace, and numerical modeling. Numerical results, obtained by this first version of PAM3D are compared to experimental measurements, and the agreement is satisfactory. However, the maximum value of the shear stress, due to the impact of the plasma plume on the bath surface, implemented in the model seems to be underestimated. Moreover, complementary simulations highlight the important role of hydrodynamic forces on the thermal behavior of the bath, and in particular of this shear stress
Souza, Edvaldo Roberto de. « Caracterizações microestruturais e avaliações das propriedades mecânicas das juntas em aço inoxidável AISI 301 L soldadas por MIG e submetidas ao reparo pelo processo TIG ». Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-22082016-143920/.
Texte intégralThe welding has great importance in manufacture of subway cars because it is used in the manufacture of structural components and finishing in passenger cars which are mostly stainless steel. Joints may show the presence of discontinuities. The discontinuities are interruptions that affect the mechanical and metallurgical properties of the weld. The presence of these discontinuities, depending on their size, nature or the combined effect may lead to failure of the weld either by reduction of mechanical properties or non-acceptance criteria established in standards. A structure that has a weld failed during its qualification or inspection by the presence of discontinuities can be retrieved through a rework to be done in this joint. The remelting of the weld using the TIG process without the use of additional material, rework is a technique that can be employed in particular the technical and economic feasibility of the process. This study analyzes the influence that the process of TIG welding rework has on mechanical behavior and microstructure of welded joints by means of: mechanical tests (tensile and Vickers hardness), non-destructive testing (visual inspection and liquid penetrant) and characterization microstructure of the weld. Results of tensile test specimens and fatigue indicated that the repair of the weld beads did not change the mechanical behavior of joints. The joints subjected to repair in which they were removed the ribs of the beads showed changes in the mechanical properties, but also had satisfactory results.
Hroš, Michal. « Optimalizace podmínek dvojitého přetavení elektronovým paprskem v procesu přípravy TBC povlaků ». Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400832.
Texte intégralAhn, Seokyoung Beaman Joseph J. « Modeling, estimation, and control of electroslag remelting process ». 2005. http://repositories.lib.utexas.edu/bitstream/handle/2152/1494/ahns17441.pdf.
Texte intégralAhn, Seokyoung. « Modeling, estimation, and control of electroslag remelting process ». Thesis, 2005. http://hdl.handle.net/2152/1494.
Texte intégralXIE, JUN-JIE, et 謝俊傑. « Study on die- casting die service life improvement by laser-remelting process ». Thesis, 2018. http://ndltd.ncl.edu.tw/handle/2bpccz.
Texte intégral國立中央大學
機械工程學系在職專班
107
High pressure die-casting is one of the most widely used and important manufacturing method in modern industry, but the working environment is often dangerous, hard and dirty due to its high temperature and high noise. This is the reason why fewer people are willing to devote themselves to the job, and furthermore, most of researches about high pressure die-casting is academic study. One of the most important problem in the die-casting process is die service life improvement, and the problem affects not only capacity of production but also quality. In this paper, die- casting die service life improvement by laser-remelting process is investigated. In the view of microstructure, the main cause of thermal fatigue crack of die-casting die and inhibiting the propagation of the crack is discussed. Finally, finding the high-risk region where thermal fatigue crack occurs is worked out by the application of CAE(Computer Aided Engineering) technology.
Livres sur le sujet "Remelting process"
Engh, Thorvald Abel, Geoffrey K. Sigworth et Anne Kvithyld. Principles of Metal Refining and Recycling. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780198811923.001.0001.
Texte intégralChapitres de livres sur le sujet "Remelting process"
Li, Jing, et Chengbin Shi. « Carbides Control in Electroslag Remelting Process ». Dans Carbide in Special Steel, 59–108. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1456-9_2.
Texte intégralKharicha, A., A. Ludwig et M. Wu. « 3D Simulation of the Melting during an Electro-Slag Remelting Process ». Dans EPD Congress 2011, 770–78. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495285.ch84.
Texte intégralWang, Qiang, Zhu He et Baokuan Li. « Modeling of Magnetohydrodynamic, Thermal and Solidified Behavior in Electroslag Remelting Process ». Dans EPD Congress 2014, 409–15. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118889664.ch49.
Texte intégralZhuo, Y., X. F. Yin et D. M. Yang. « The Damage of the SiC/Al Preform Wire During Remelting Process ». Dans Controlled Interphases in Composite Materials, 277–83. Dordrecht : Springer Netherlands, 1990. http://dx.doi.org/10.1007/978-94-011-7816-7_27.
Texte intégralPericleous, Koulis, Georgi Djambazov, Mark Ward, Lang Yuan et Peter D. Lee. « A Multi-Scale 3D Model of the Vacuum Arc Remelting Process ». Dans Supplemental Proceedings, 291–98. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118357002.ch38.
Texte intégralBirol, Burak, et Muhlis Nezihi Saridede. « Recycling of High Quality Steel Scraps Directly in Electroslag Remelting Process (ESR) ». Dans EPD Congress 2011, 959–65. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495285.ch106.
Texte intégralKharicha, A., M. Wu et A. Ludwig. « Variation of the Resistance during the Electrode Movement in the Electroslag Remelting Process ». Dans Proceedings of the 2013 International Symposium on Liquid Metal Processing and Casting, 145–50. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118830857.ch22.
Texte intégralKharicha, A., M. Wu et A. Ludwig. « Variation of the Resistance During the Electrode Movement in the Electroslag Remelting Process ». Dans Proceedings of the 2013 International Symposium on Liquid Metal Processing & ; Casting, 145–50. Cham : Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-48102-9_22.
Texte intégralZang, Ximin, Zhouhua Jiang, Hua Song, Fubin Liu, Xin Deng, Xu Chen et Chong Han. « A Study of Slag and Steel Leakage Influence Factors during Electroslag Remelting Withdrawing Process ». Dans Proceedings of the 2013 International Symposium on Liquid Metal Processing and Casting, 119–22. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118830857.ch17.
Texte intégralPatel, Ashish, David W. Tripp et Daniel Fiore. « Application of a Model for Simulating the Vacuum Arc Remelting Process in Titanium Alloys ». Dans Proceedings of the 2013 International Symposium on Liquid Metal Processing and Casting, 239–44. Hoboken, NJ, USA : John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118830857.ch35.
Texte intégralActes de conférences sur le sujet "Remelting process"
Derouet, H., L. Sabatier, F. Coste et R. Fabbro. « Process control applied to laser surface remelting ». Dans ICALEO® ‘97 : Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1997. http://dx.doi.org/10.2351/1.5059666.
Texte intégralFu, Yunchang, Dongxiong Ling, Bruno Martin et Junchang Li. « Finite-element modeling of laser remelting process ». Dans Photonics Asia 2002, sous la direction de ShuShen Deng, Tatsuo Okada, Klaus Behler et XingZong Wang. SPIE, 2002. http://dx.doi.org/10.1117/12.482911.
Texte intégralSong, Jin-chun, Li-li Zhao et Hong-yi Liu. « State Estimate Based on Nonlinear Filter of ElectroSlag Remelting Process ». Dans 2008 Pacific-Asia Workshop on Computational Intelligence and Industrial Application (PACIIA). IEEE, 2008. http://dx.doi.org/10.1109/paciia.2008.12.
Texte intégralAhn, Seokyoung, Joseph J. Beaman, Rodney L. Williamson et David K. Melgaard. « Model-Based Control of Electroslag Remelting Process Using Unscented Kalman Filter ». Dans ASME 2008 Dynamic Systems and Control Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/dscc2008-2148.
Texte intégralSong, Jin-chun, Li-li Zhao et Hong-yi Liu. « Optimizing cooperative control based on genetic algorithm for electroSlag remelting process ». Dans 2008 IEEE Conference on Cybernetics and Intelligent Systems. IEEE, 2008. http://dx.doi.org/10.1109/iccis.2008.4670764.
Texte intégralHaferkamp, H., M. Goede et O. Thürk. « Short Time Process Observation During Laser Remelting of Aluminium Diecast Alloys ». Dans The European Conference on Lasers and Electro-Optics. Washington, D.C. : Optica Publishing Group, 1998. http://dx.doi.org/10.1364/cleo_europe.1998.cthh93.
Texte intégralCamila Almeida Martins et Jhon Jairo Ramirez-Behainne. « THERMAL CYCLING SIMULATION DURING REMELTING PROCESS OF THE STEEL ASTM A743-CA6NM ». Dans 23rd ABCM International Congress of Mechanical Engineering. Rio de Janeiro, Brazil : ABCM Brazilian Society of Mechanical Sciences and Engineering, 2015. http://dx.doi.org/10.20906/cps/cob-2015-1361.
Texte intégralLiao, Jiankan, Ashvin Sharma et Daniel Cooper. « The Effect of Composition, Geometry and a Novel Tool Design on Metal Recovery During Aluminum Process Scrap Remelting ». Dans ASME 2022 17th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/msec2022-84900.
Texte intégralTian, Zongjun, Lida Shen, Zhidong Liu et Yinhui Huang. « Microstructure Characteristics and High-Temperature Oxidation Behavior of Plasma-Sprayed and Laser-Remelted MCrAlY Coatings on TiAl Intermetallics ». Dans ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50145.
Texte intégralTanno, M., K. Ogawa, T. Shoji, S. O. Chwa et A. Ohmori. « Improvement of Bond Strength of Thermal Barrier Coatings by a Laser Remelting Process ». Dans ITSC2004, sous la direction de Basil R. Marple et Christian Moreau. ASM International, 2004. http://dx.doi.org/10.31399/asm.cp.itsc2004p1076.
Texte intégral