Littérature scientifique sur le sujet « Receptance Coupling »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Receptance Coupling ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Receptance Coupling"
Tsai, Sung-Han, Huajiang Ouyang et Jen-Yuan Chang. « A receptance-based method for frequency assignment via coupling of subsystems ». Archive of Applied Mechanics 90, no 2 (2 novembre 2019) : 449–65. http://dx.doi.org/10.1007/s00419-019-01619-9.
Texte intégralSchmitz, Tony L., et G. Scott Duncan. « Three-Component Receptance Coupling Substructure Analysis for Tool Point Dynamics Prediction ». Journal of Manufacturing Science and Engineering 127, no 4 (4 février 2005) : 781–90. http://dx.doi.org/10.1115/1.2039102.
Texte intégralPark, Simon S., Yusuf Altintas et Mohammad Movahhedy. « Receptance coupling for end mills ». International Journal of Machine Tools and Manufacture 43, no 9 (juillet 2003) : 889–96. http://dx.doi.org/10.1016/s0890-6955(03)00088-9.
Texte intégralMONTEVECCHI, Filippo, Niccolo GROSSI, Antonio SCIPPA et Gianni CAMPATELLI. « 0602 Efficient receptance coupling approach for tool-tip dynamics identification ». Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2015.8 (2015) : _0602–1_—_0602–6_. http://dx.doi.org/10.1299/jsmelem.2015.8._0602-1_.
Texte intégralHan, Zhen Yu, Xiang Zhang, Hong Ya Fu et Ya Zhou Sun. « Receptance Coupling for Micro-End-Milling ». Advanced Materials Research 472-475 (février 2012) : 2391–96. http://dx.doi.org/10.4028/www.scientific.net/amr.472-475.2391.
Texte intégralHung, J. P., W. Z. Lin, K. D. Wu et W. C. Shih. « Analyzing the Dynamic Characteristics of Milling Tool Using Finite Element Method and Receptance Coupling Method ». Engineering, Technology & ; Applied Science Research 9, no 2 (10 avril 2019) : 3918–23. http://dx.doi.org/10.48084/etasr.2463.
Texte intégralKim, Ji-wook, Jae-wook Lee, Kun-woo Kim, Ji-heon Kang, Min-seok Yang, Dong-yul Kim, Seung-yeop Lee et Jin-seok Jang. « Estimation of the Frequency Response Function of the Rotational Degree of Freedom ». Applied Sciences 11, no 18 (14 septembre 2021) : 8527. http://dx.doi.org/10.3390/app11188527.
Texte intégralSchmitz, Tony L., Matthew A. Davies et Michael D. Kennedy. « Tool Point Frequency Response Prediction for High-Speed Machining by RCSA ». Journal of Manufacturing Science and Engineering 123, no 4 (1 janvier 2001) : 700–707. http://dx.doi.org/10.1115/1.1392994.
Texte intégralKumar, Uttara V., et Tony L. Schmitz. « Spindle dynamics identification for Receptance Coupling Substructure Analysis ». Precision Engineering 36, no 3 (juillet 2012) : 435–43. http://dx.doi.org/10.1016/j.precisioneng.2012.01.007.
Texte intégralSchmitz, Tony, Andrew Honeycutt, Michael Gomez, Michael Stokes et Emma Betters. « Multi-point coupling for tool point receptance prediction ». Journal of Manufacturing Processes 43 (juillet 2019) : 2–11. http://dx.doi.org/10.1016/j.jmapro.2019.03.043.
Texte intégralThèses sur le sujet "Receptance Coupling"
Duncan, Gregory S. « Milling dynamics prediction and uncertainty analysis using receptance coupling substructure analysis ». [Gainesville, Fla.] : University of Florida, 2006. http://purl.fcla.edu/fcla/etd/UFE0015544.
Texte intégralKumar, Uttara Vijay. « Comparison of equivalent diameter end mill models for dynamics prediction by receptance coupling substructure analysis ». [Gainesville, Fla.] : University of Florida, 2009. http://purl.fcla.edu/fcla/etd/UFE0041355.
Texte intégralKiefer, Aaron J. « Integrating electromechanical actuator hardware with receptance coupling substructure analysis for chatter prediction on high speed machining centers ». 2004. http://www.lib.ncsu.edu/theses/available/etd-04162004-161118/unrestricted/etd.pdf.
Texte intégralGROSSI, NICCOLO'. « Modeling and simplification methods for machine tool dynamics prediction in high speed milling ». Doctoral thesis, 2015. http://hdl.handle.net/2158/1005746.
Texte intégralOstad, Ali Akbari Vahid. « Modelling the dynamics of vibration assisted drilling systems using substructure analysis ». Thesis, 2020. http://hdl.handle.net/1828/11890.
Texte intégralGraduate
Huang, Zhe-Hao, et 黃哲皜. « Dynamic analysis and receptacle coupling prediction for frequency response function of machine tool ». Thesis, 2017. http://ndltd.ncl.edu.tw/handle/cjn875.
Texte intégral國立勤益科技大學
機械工程系
105
Regenerative chatter is a major factor restricting the process efficiency and the longevity of cutting tools in high speed milling process. According to the machining mechanics, the occurrence of chatter can be related to the cutting force and the structure characteristics of the machine tool structure. To meet the required machining operation without chatter, the machining conditions of a specific cutter should be appropriately selected from the stability lobes diagram. Generally, the stability of the specific cutter can be determined from the measured frequency response functions (FRFs). However this would be a complicated and time-consuming task with less efficiency. Therefore, this study employed the receptance coupling substructure analysis to predict the frequency response functions of the spindle tool. In this method the receptance matrices of the substructures, tool holder/tool module (substructure A) and spindle nose (substructure B), are composed of the linear and rotational FRFs under excitation force and moment. The force induced dynamic compliance FRFs of the tool holder/tool modules were experimentally measured by impact vibration tests and the FRFs induced by moment were assessed through the finite element simulations. In prediction algorithm, the interface stiffness matrix between spindle nose and tool holder was calculated through the reversed operation of the receptance matrices of the selected spindle tool and tool holder/tool module. With the identified interface matrix, the FRFs and dynamic compliance of a specific cutter with different flute number , diameter and overhung length were predicted by proposed method, which were also successfully verified with the experimental measurements.
Chapitres de livres sur le sujet "Receptance Coupling"
Schmitz, Tony L., et K. Scott Smith. « Receptance Coupling ». Dans Mechanical Vibrations, 367–414. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52344-2_10.
Texte intégralSchmitz, Tony L., et K. Scott Smith. « Receptance Coupling ». Dans Mechanical Vibrations, 321–66. Boston, MA : Springer US, 2011. http://dx.doi.org/10.1007/978-1-4614-0460-6_9.
Texte intégralJasiewicz, M., et B. Powałka. « Receptance coupling for turning with a follower rest ». Dans Advances in Mechanics : Theoretical, Computational and Interdisciplinary Issues, 245–48. CRC Press, 2016. http://dx.doi.org/10.1201/b20057-54.
Texte intégralActes de conférences sur le sujet "Receptance Coupling"
Burns, Timothy J., et Tony L. Schmitz. « Receptance Coupling Study of Tool-Length Dependent Dynamic Absorber Effect ». Dans ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60081.
Texte intégralSchmitz, Tony L. « Improved Sensor Data Utility Through Receptance Coupling Modeling ». Dans ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59762.
Texte intégralBurns, Timothy J., et Tony L. Schmitz. « A Study of Linear Joint and Tool Models in Spindle-Holder-Tool Receptance Coupling ». Dans ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2005. http://dx.doi.org/10.1115/detc2005-85275.
Texte intégralJasiewicz, Marcin, et Bartosz Powałka. « Prediction of turning stability using receptance coupling ». Dans COMPUTER METHODS IN MECHANICS (CMM2017) : Proceedings of the 22nd International Conference on Computer Methods in Mechanics. Author(s), 2018. http://dx.doi.org/10.1063/1.5019090.
Texte intégralRezaei, M. M., M. R. Movahhedy, M. T. Ahmadian et H. Moradi. « Development of Inverse Receptance Coupling Method for Prediction of Milling Dynamics ». Dans ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-24912.
Texte intégralZhongqun, Li, Li Shuo et Chen Yizhuang. « Receptance Coupling for End Mill Using 2-Section Step Beam Vibration Model ». Dans 2009 Second International Conference on Intelligent Computation Technology and Automation. IEEE, 2009. http://dx.doi.org/10.1109/icicta.2009.276.
Texte intégralJin, Xiaoliang, et Narahara Gopal Koya. « Prediction of Coupled Torsional-Axial Vibrations of Drilling Tool With Clamping Boundary Conditions ». Dans ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8665.
Texte intégralYigit, Ahmet S., et A. Galip Ulsoy. « Application of Nonlinear Receptance Coupling to Dynamic Stiffness Evaluation for Reconfigurable Machine Tools ». Dans ASME 2001 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/detc2001/vib-21397.
Texte intégralEdoimioya, Nosakhare, et Chinedum E. Okwudire. « An Efficient Control-oriented Modeling Approach for Vibration-prone Delta 3D printers using Receptance Coupling ». Dans 2021 IEEE 17th International Conference on Automation Science and Engineering (CASE). IEEE, 2021. http://dx.doi.org/10.1109/case49439.2021.9551537.
Texte intégralMascardelli, Brock A., Simon S. Park et Theodor Freiheit. « Substructure Coupling of Micro-End Mills ». Dans ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13129.
Texte intégral