Littérature scientifique sur le sujet « Readout electronic »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Readout electronic ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Readout electronic"
Guo, Cheng, Jin Lin, Lian-Chen Han, Na Li, Li-Hua Sun, Fu-Tian Liang, Dong-Dong Li et al. « Low-latency readout electronics for dynamic superconducting quantum computing ». AIP Advances 12, no 4 (1 avril 2022) : 045024. http://dx.doi.org/10.1063/5.0088879.
Texte intégralAbgrall, N., M. Amman, I. J. Arnquist, F. T. Avignone, A. S. Barabash, C. J. Barton, P. J. Barton et al. « The Majorana Demonstrator readout electronics system ». Journal of Instrumentation 17, no 05 (1 mai 2022) : T05003. http://dx.doi.org/10.1088/1748-0221/17/05/t05003.
Texte intégralChen, Jian, Rong Zhou, Chunhui Dong, Xiaofeng Cao, Fengzhao Shen, Cheng Liu, Hao Xiong, Qichang Huang, Yao Li et Zhangxing Liu. « LHAASO-WCDA++ electronic readout system ». Nuclear Instruments and Methods in Physics Research Section A : Accelerators, Spectrometers, Detectors and Associated Equipment 964 (juin 2020) : 163753. http://dx.doi.org/10.1016/j.nima.2020.163753.
Texte intégralTimothy, J. Gethyn. « Electronic Readout Systems for Microchannel Plates ». IEEE Transactions on Nuclear Science 32, no 1 (1985) : 427–32. http://dx.doi.org/10.1109/tns.1985.4336868.
Texte intégralRadhakrishnan, S., et A. Lal. « Scalable microbeam flowsensors with electronic readout ». Journal of Microelectromechanical Systems 14, no 5 (octobre 2005) : 1013–22. http://dx.doi.org/10.1109/jmems.2005.856650.
Texte intégralFritzsch, T., F. Huegging, P. Mackowiak, K. Zoschke, M. Rothermund, N. Owtscharenko, D. L. Pohl, H. Oppermann et N. Wermes. « 3D TSV hybrid pixel detector modules with ATLAS FE-I4 readout electronic chip ». Journal of Instrumentation 17, no 01 (1 janvier 2022) : C01029. http://dx.doi.org/10.1088/1748-0221/17/01/c01029.
Texte intégralChen, Tianze, Xiaohui Li, Ke Wang, CunFeng Wei, Lei Shuai, Xiaopan Jiang, Na Wang, Mian Wang et Long Wei. « A readout electronic system for a 3D position-sensitive CdZnTe gamma-ray spectrometer based on the CPRE10-32 readout ASIC ». Journal of Instrumentation 17, no 10 (1 octobre 2022) : T10005. http://dx.doi.org/10.1088/1748-0221/17/10/t10005.
Texte intégralHasker, PJS, et J. Bassingthwaighte. « Implanting electronic identification transponders under the scutifon cartilage of beef cattle is inappropriate under Australian conditions ». Australian Journal of Experimental Agriculture 35, no 1 (1995) : 15. http://dx.doi.org/10.1071/ea9950015.
Texte intégralElsobky, Mourad, Yigit Mahsereci, Jürgen Keck, Harald Richter et Joachim N. Burghartz. « Design of a CMOS readout circuit on ultra-thin flexible silicon chip for printed strain gauges ». Advances in Radio Science 15 (21 septembre 2017) : 123–30. http://dx.doi.org/10.5194/ars-15-123-2017.
Texte intégralAad, G., A. V. Akimov, K. Al Khoury, M. Aleksa, T. Andeen, C. Anelli, N. Aranzabal et al. « The Phase-I trigger readout electronics upgrade of the ATLAS Liquid Argon calorimeters ». Journal of Instrumentation 17, no 05 (1 mai 2022) : P05024. http://dx.doi.org/10.1088/1748-0221/17/05/p05024.
Texte intégralThèses sur le sujet "Readout electronic"
Toffoli, Valeria. « Superhydrophobic BIOMEMS sensor arrays : development of actuation and readout electronic strategies ». Doctoral thesis, Università degli studi di Trieste, 2014. http://hdl.handle.net/10077/9993.
Texte intégralLa tecnologia dei sistemi micro-elettro-meccanici (MEMS) ha dimostrato d’avere grandi potenzialità in molti campi, in particolare nei sistemi bio-medicali. Essa si basa infatti su processi di fabbricazione ad altro volume produttivo, permettendo una considerevole riduzione dei costi per dispositivo. Un ulteriore beneficio di questa tecnologia risiede nella possibilità di dimensionare i dispositivi fino a raggiungere l’ordine del submicron, così da consentire l’integrazione e il monitoraggio in tempo reale di sistemi sensibili a biomarker di tipo medicale e biologici. Tra gli obiettivi futuri dei MEMS biomedicali (BioMEMS) vi è la realizzazione di dispositivi in grado di interfacciarsi direttamente con il paziente e definirne lo stato di salute grazie alla rilevazione del livello di centinaia di diversi biomarker (siano essi chimici o fisici). La medicina assumerebbe in questa visione una configurazione ad personam nella quale al paziente verrebbe prontamente somministrato un quantitativo di medicinale adatto alle risposte del suo organismo. A tale scopo i dispositivi MEMS devono essere in grado di effettuare analisi multiple operando in un ambiente liquido. Tuttavia è proprio l’ambiente liquido a comportare la riduzione di sensibilità e, quindi, di performance dei sensori MEMS. La presente ricerca si pone lo scopo di sviluppare nuovi sistemi elettronici di misurazione e attuazione di due distinte tipologie di BioMEMS risonanti operanti in liquido, i cantilever e i pillar. In particolare verrano trattati tre argomenti: la realizzazione di setup ottici per applicazione dei MEMS in liquido ed in aria, la progettazione di sistemi elettronici di attuazione e lettura di singoli pillar nel loro comportamento in frequenza e lo sviluppo di un software LabVIEW in grado di programmare un FPGA ed ottenere un PLL digitale da impiegarsi nell’analisi in tempo reale del comportamento in frequenza di RF-MEMS. Il primo progetto è stato sviluppato in collaborazione l'Università di Kaiserslautern (Germania) e prevedeva la realizzazione di sistemi microfluidici e setups ottici, interfacciati in modo tale da permettere la rilevazione della risposta in frequenza di molteplici MEMS operanti in parallelo. Nel secondo progetto l’obiettivo era la realizzazione di un sistema elettronico in grado di integrare in un unico dispositivo i sistemi di attuazione e lettura dei pillar. In particolare siamo stati in grado di modulare l’ampiezza di risonanza dei nostri dispositivi risonanti mediante l’applicazione della forza di polarizzazione Kelvin mentre lo sviluppo del sistema di lettura richiede ulteriore lavoro di indagine. Infine, nell'ultimo progetto è stato realizzato un sistema PLL digitale con 10 MHz di banda passante utilizzando la tecnologia della National Instruments (FlexRIO NI5781R). Mediante questo PLL si è potuto identificare la frequenza di risonanza di diverse tipologie di MEMS e se ne è seguite le variazioni in tempo reale . Le attività di ricerca sperimentale sono state eseguite presso il laboratorio CNR- IOM a Trieste.
XXVI Ciclo
1985
Downey, Richard H. « Toward a micro-scale acoustic direction-finding sensor with integrated electronic readout ». Monterey, California : Naval Postgraduate School, 2013. http://hdl.handle.net/10945/34658.
Texte intégralSeveral advances are made toward a microelectromechanical (MEMS) acoustic direction-finding sensor based on the Ormia ochracea fly’s ear. First, linear elastic stiffness models are presented and then validated by using a nanoindenter to measure the sensor’s stiffness directly. The measured stiffness is highly linear, and the resonant frequencies are correctly predicted by the models presented. Additional nanoindenter results suggest that the sensor can be exposed to at least 162 decibel sound pressure level with no loss of function. Next, an improved capacitive readout system using branched comb fingers is presented. This design is shown to double electrical sensitivity to motion. Finally, it is shown that residual stress-induced curvature in the sensors greatly reduces their sensitivity by effectively shrinking the readout capacitors. A simple model of this curvature is presented and then verified by measurements. This model offers an extremely straightforward means of predicting curvature in similarly fabricated structures. It is also shown that perforations in the sensor’s structure have no effect on curvature. The results presented here provide several essential tools for the continued development of the MEMS acoustic direction-finding sensor.
Lim, Choon Wee. « Designing an electronic readout for a directional micro electrical-mechanical (MEMS) sound sensor ». Monterey, California. Naval Postgraduate School, 2011. http://hdl.handle.net/10945/10639.
Texte intégralChunara, Rumi. « Low-noise electronic readout for high-throughput, portable biomolecular detection in microchannel arrays ». Thesis, Massachusetts Institute of Technology, 2006. http://hdl.handle.net/1721.1/38328.
Texte intégralIncludes bibliographical references (leaves 57-58).
There's not much that can be done to make research easier - but excitement and passion are two key elements of success, and two of the many things I have learned from my advisor, Scott Manalis. It has been (and will continue to be) an awesome opportunity that I am especially thankful for, to work in nanoscale sensing with him. Perhaps the next best thing to a great advisor is having friends to work with who are equally as excited as me, more experienced, and many times smarter. I am forever indebted to all the members of the lab who have contributed to my biggest asset - knowledge. Special respect to those who bestow humour with the facts: Nebojsa, Johnson, Mike, Phil, and of course Thomas without whom I would have been in the lab a lot longer and in Europe a lot less. Thanks for coming to lab with a smile and for helping me leave with one. Places like MIT are excellent institutions, mostly because of their students. I am thankful to all of the graduate students in other labs which are always glad to give some words of advice or spend a few hours explaining something not so trivial to me. Especially to those in Professor Rahul Sarpeshkar's laboratory, especially Soumya and Scott. I am also very lucky to have great friends outside of the lab, for constant support, empathy and for bettering my overall well-being. Also to those who have come into my life and left at some point, I have gained so many more things from you than you may realize. Finally, to those who have probably contributed the most to my research success - without a single formula or circuit diagram, my family: Habibullah, Rosemin and Alizahra. You made me realize that as with life, struggle is the meaning of research. Defeat or victory is in the hands of God, but struggle itself is man's duty and should be his joy.
by Rumi Chunara.
S.M.
Chunara, Rumi. « Electronic readout of microchannel resonators for precision mass sensing in solution by Rumi Chunara ». Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/57803.
Texte intégralCataloged from PDF version of thesis.
Includes bibliographical references (p. 115-120).
Microfabricated transducers have enabled new approaches for detection of biomolecules and cells. Integration of electronics with these tools simplify systems and provide platforms for robust use outside of the laboratory setting. Suspended microchannel resonators (SMRs) are sensitive microfluidic platforms used to precisely measure the buoyant mass of single cells and monolayers of protein in fluid environments. Conventionally, micro cantilever deflection is measured by the optical-lever technique, wherein a laser beam is reflected off the cantilever onto a position sensitive photodiode. This thesis introduces microchannel resonators with electronic readout, eliminating the use of external optical components for resolving the sensor's resonant frequency. Piezo resistors have been fabricated on SMRs through ion implantation integrated with the existing SMR fabrication process. We fabricated two designs: one with a cantilever length of 210 pm and resonant frequency of -347 kHz, and the other with a cantilever length of 406 pm and resonant frequency of ~92 kHz. The work here builds upon knowledge of signal transduction from static and dynamic cantilever based sensors because the piezo resistors are implemented on vacuum encapsulated devices containing fluid. Electronic readout is shown to resolve the microchannel resonance frequency with an Allan variance of 5 x 10-18 (210 pm) and 2 x 1017 (406 pm) using a 100ms gate time, corresponding to a mass resolution of 0.1 and 0.4 fg respectively. This mass resolution calculated from piezoresistive readout frequency stability, is approximately 3X better than optical readout for the 210 pm device and 1.3X for the 406 pm device using the same gate time. Resolution is expected to improve with further optimization of the system. To demonstrate the readout, histograms of the buoyant masses of a mixture of size standard polystyrene beads (with nominal diameters 1.6, 1.8, and 2.0 pm) and budding yeast cells were made.
Ph.D.
Ibragimov, Iskander. « Development of a readout electronic for a Si-pixeldetector for application in a Compton camera ». [S.l. : s.n.], 2004. http://deposit.ddb.de/cgi-bin/dokserv?idn=97431563X.
Texte intégralZhang, Jianbo. « Readout Circuits for a Z-axis Hall Sensor with Sensitivity Drift Calibration ». Thesis, KTH, Skolan för informations- och kommunikationsteknik (ICT), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-175785.
Texte intégralHausmann, Joachim. « Development of a low noise integrated readout electronic for pixel detectors in CMOS technology for a Compton camera ». [S.l.] : [s.n.], 2002. http://deposit.ddb.de/cgi-bin/dokserv?idn=964928701.
Texte intégralTian, Ye. « SiC Readout IC for High Temperature Seismic Sensor System ». Doctoral thesis, KTH, Integrerade komponenter och kretsar, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-213969.
Texte intégralQC 20170911
Dreier, Till. « Design and verification of a USB 3.0 readout system for Timepix3 hybrid pixel detectors ». Thesis, Mittuniversitetet, Avdelningen för elektronikkonstruktion, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-34114.
Texte intégralDenna avhandling beskriver utveckling och verifikation av ett USB 3.0 baserad utläsningssytem för Timepix3 detektorer. Timepix3 är en hybridpixeldetektor som består av en 256x256 pixelmatris med en pixelstorlek av 55μm2 och som klarar en tidsupplösning av 1.56ns. Detektorn tillåter att mäta energi och tidsinformation samtidigt och använder en händelsedriven dataström med en maximal datahastighet på 5,12 Gb/s som motsvarar ca. 85 miljoner träffar per sekund. Vårt mål är att detta systemet tillåter databehandling i FPGA:n alltså minskar datamängden och efterbehandlingstid. Vi valde USB 3.0 för att det ger en nytsad datahastighet och för att det finns på alla moderna datorer. Dessutom föll valet på ett XEM6310 kort från Opal Kelly som utvecklingsplatform. Opal Kelly erbjuder ett ramverk som hanterar kommunikationen mellan FPGA:n och datorn. Ramverket innehåller FPGA-komponenter och en API. Adapterkort utvecklades i samarbete med University of Glasgow som kopplar vårt utvecklingskort till detektorkortet där detektorutgångssignaler vandlas från SLVS till LVDS signaler. Dessutom implementerade vi FPGA-firmware som består av ett detektorgränssnitt, ett USB-gränssnitt, och en kärna med ett databehandlingsgränssnitt. Ett multi-platform bibliotek utvecklades och implementerades i C/C++ med användning av Qt. Bibliotektet används för att konfigurera utläsningssystemet, konfigurera detektorn, och hantera dataströmmning från och till detektorn. Dataanalys och verifiering utfördes med hjälp av självutvecklade Python-verktyg. Simuleringar av firmware visade det färväntade beteendet. Firmware och bibliote- ket verifierades genom att konfigurera detektorn, läsa tillbaka konfigurationen, och mätningar med en Americiumkälla. Ekvalisering, global energikalibration, och per-pixel-kalibration utfördes också. Dessutom har systemet använts för att ta röntenbilder. Analys av USB 3.0 dataströmming visade att biblioteket och utläsningssystemet kan upprätthålla en ström av upp till 380 MB/s från FPGA:n till datorn. Det beskrivna utläsningssystemet implementerades och verifierades i simulering och experimentellt med hjälp av strålkällar. Dataströmmning med USB 3.0 utförde sig bättre än förväntat och visade högre hastigheter som visas as Opal Kelly. Firmware och biblioteket fungerar som förväntat. Adapterkortet fungerar men kräver vissa ändringar för att tillåta högra datahastigheter. Dessutom måste datakanalerna flyttas till olika ingångar för att synkronisera datakanalerna till en extern klocka.
Livres sur le sujet "Readout electronic"
R, Fossum Eric, et Society of Photo-optical Instrumentation Engineers., dir. Infrared readout electronics : 21-22 April 1992, Orlando, Florida. Bellingham, Wash : The Society, 1992.
Trouver le texte intégralR, Fossum Eric, et Society of Photo-optical Instrumentation Engineers., dir. Infrared readout electronics III : 9 April 1996, Orlando, Florida. Bellingham, Wash., USA : SPIE, 1996.
Trouver le texte intégralBedabrata, Pain, Lomhein Terrence S et Society of Photo-optical Instrumentation Engineers., dir. Infrared readout electronics IV : 13 April 1998, Orlando, Florida. Bellingham, Wash., USA : SPIE, 1998.
Trouver le texte intégralR, Fossum Eric, et Society of Photo-optical Instrumentation Engineers., dir. Infrared readout electronics II : 7-8 April 1994, Orlando, Florida. Bellingham, Wash., USA : SPIE, 1994.
Trouver le texte intégralCenter, Goddard Space Flight, dir. Theory and development of position-sensitive quantum calorimeters. Greenbelt, Md : National Aeronautics and Space Administration, Goddard Space Flight Center, 2001.
Trouver le texte intégralZhang, Guofeng, Yi Zhang, Hui Dong, Hans-Joachim Krause et Xiaoming Xie. SQUID Readout Electronics and Magnetometric Systems for Practical Applications. Wiley & Sons, Limited, John, 2020.
Trouver le texte intégralZhang, Guofeng, Yi Zhang, Hui Dong, Hans-Joachim Krause et Xiaoming Xie. SQUID Readout Electronics and Magnetometric Systems for Practical Applications. Wiley & Sons, Incorporated, John, 2020.
Trouver le texte intégralZhang, Guofeng, Yi Zhang, Hui Dong, Hans-Joachim Krause et Xiaoming Xie. SQUID Readout Electronics and Magnetometric Systems for Practical Applications. Wiley & Sons, Incorporated, John, 2020.
Trouver le texte intégralZhang, Guofeng, Yi Zhang, Hui Dong, Hans-Joachim Krause et Xiaoming Xie. SQUID Readout Electronics and Magnetometric Systems for Practical Applications. Wiley & Sons, Incorporated, John, 2020.
Trouver le texte intégralPuers, Robert, Chris van Hoof et Refet Firat Yazicioglu. Biopotential Readout Circuits for Portable Acquisition Systems. Springer, 2009.
Trouver le texte intégralChapitres de livres sur le sujet "Readout electronic"
Kinoshita, K., T. Matsumura, Y. Inagaki, N. Hirai, M. Sugiyama, H. Kihara, N. Watanabe, Y. Shimanuki et A. Yagashita. « The Electronic Zooming TV Readout System for an X-Ray Microscope ». Dans X-Ray Microscopy III, 335–37. Berlin, Heidelberg : Springer Berlin Heidelberg, 1992. http://dx.doi.org/10.1007/978-3-540-46887-5_75.
Texte intégralGys, T., H. Leutz et D. Piedigrossi. « Opto-Electronic Delay for the Readout of Particle Tracks from Scintillating Fibres ». Dans New Technologies for Supercolliders, 185–95. Boston, MA : Springer US, 1991. http://dx.doi.org/10.1007/978-1-4684-1360-1_14.
Texte intégralZanetto, Francesco. « Low-Noise Mixed-Signal Electronics for Closed-Loop Control of Complex Photonic Circuits ». Dans Special Topics in Information Technology, 55–64. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-85918-3_5.
Texte intégralLutz, Gerhard. « The Electronics of the Readout Function ». Dans Semiconductor Radiation Detectors, 153–227. Berlin, Heidelberg : Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-71679-2_7.
Texte intégralCarminati, Marco, et Carlo Fiorini. « Readout Electronics for Gamma-Ray Astronomy ». Dans Handbook of X-ray and Gamma-ray Astrophysics, 1–23. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-4544-0_51-1.
Texte intégralLiu, Hengshuang, et Dong Wang. « Readout Electronics for CASCA in XTP Detector ». Dans Springer Proceedings in Physics, 154–57. Singapore : Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1313-4_31.
Texte intégralBuckhorst, Rolf, Bedrich J. Hosticka et Helmut Seidel. « CMOS Readout Electronics for Capacitive Acceleration Sensors ». Dans Micro System Technologies 90, 636–41. Berlin, Heidelberg : Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-642-45678-7_91.
Texte intégralMyny, Kris, Hagen Marien, Soeren Steudel, Peter Vicca, Monique J. Beenhakkers, Nick A. J. M. van Aerle, Gerwin H. Gelinck et al. « Design Methodologies for Organic RFID Tags and Sensor Readout on Foil ». Dans Organic Electronics II, 387–411. Weinheim, Germany : Wiley-VCH Verlag GmbH & Co. KGaA, 2012. http://dx.doi.org/10.1002/9783527640218.ch12.
Texte intégralJackson, Carl, Kevin O’Neill, Liam Wall et Brian McGarvey. « Silicon Photomultipliers for High-Performance Scintillation Crystal Readout Applications ». Dans Analog Electronics for Radiation Detection, 141–83. Boca Raton : Taylor & Francis, CRC Press, 2016. | Series : Devices, circuits, and systems ; 59 : CRC Press, 2017. http://dx.doi.org/10.1201/b20096-7.
Texte intégralBuonanno, Luca. « Gamma-Ray Spectroscopy and Imaging with SiPMs Readout of Scintillators : Front-End Electronics and Position Sensitivity Algorithms ». Dans Special Topics in Information Technology, 41–51. Cham : Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15374-7_4.
Texte intégralActes de conférences sur le sujet "Readout electronic"
Garzon-Camacho, A., B. Fernandez, M. A. G. Alvarez, J. Ceballos et J. M. de la Rosa. « Readout electronic system for particle tracking in secondary electron detectors ». Dans 2014 IEEE 57th International Midwest Symposium on Circuits and Systems (MWSCAS). IEEE, 2014. http://dx.doi.org/10.1109/mwscas.2014.6908360.
Texte intégralLapington, Jonathan S., James S. Milnes, Martin Page, Martin B. Ingle et K. Rees. « Novel electronic readout systems for photon-counting imagers ». Dans International Symposium on Optical Science and Technology, sous la direction de C. Bruce Johnson. SPIE, 2000. http://dx.doi.org/10.1117/12.405872.
Texte intégralPetrescu, Violeta, Julia Pettine, Devrez M. Karabacak, Marianne Vandecasteele, Mercedes Crego Calama et Chris Van Hoof. « Power-efficient readout circuit for miniaturized electronic nose ». Dans 2012 IEEE International Solid- State Circuits Conference - (ISSCC). IEEE, 2012. http://dx.doi.org/10.1109/isscc.2012.6177030.
Texte intégralFowler, Boyd A., Michael Godfrey, Janusz Balicki et John Canfield. « Low-noise readout using active reset for CMOS APS ». Dans Electronic Imaging, sous la direction de Morley M. Blouke, Nitin Sampat, George M. Williams, Jr. et Thomas Yeh. SPIE, 2000. http://dx.doi.org/10.1117/12.385430.
Texte intégralMiyatake, Shigehiro, Kouichi Ishida, Takashi Morimoto, Yasuo Masaki et Hideki Tanabe. « Transversal-readout CMOS active pixel image sensor ». Dans Photonics West 2001 - Electronic Imaging, sous la direction de Morley M. Blouke, John Canosa et Nitin Sampat. SPIE, 2001. http://dx.doi.org/10.1117/12.426949.
Texte intégralKolasiński, Piotr, Krzysztof Pozniak, Grzegorz Kasprowicz, Wojciech Zabolotny, Mikolaj Sowinski, Marcin Bielewicz et Arkadiusz Chlopik. « Electronic readout system designed for MCORD in NICA experiment ». Dans Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2020, sous la direction de Ryszard S. Romaniuk et Maciej Linczuk. SPIE, 2020. http://dx.doi.org/10.1117/12.2580615.
Texte intégralStankowiak, Guillaume, Michel Piat, Elia Battistelli, Giuseppe D'Alessandro, Paolo de Bernardis, Marco De Petris, Manuel González et al. « Detection chain and electronic readout of the QUBIC instrument ». Dans Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy X, sous la direction de Jonas Zmuidzinas et Jian-Rong Gao. SPIE, 2020. http://dx.doi.org/10.1117/12.2561567.
Texte intégralAbba, A., F. Caponio, A. Geraci, N. Lusardi et N. Neri. « Electronic readout system for retina-based cosmic-ray telescope ». Dans 2014 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC). IEEE, 2014. http://dx.doi.org/10.1109/nssmic.2014.7431135.
Texte intégralMiyatake, Shigehiro, Masaru Miyamoto, Takashi Morimoto, Yasuo Masaki et Hideki Tanabe. « Transversal direct readout CMOS APS with variable shutter mode ». Dans Electronic Imaging 2002, sous la direction de Morley M. Blouke, John Canosa et Nitin Sampat. SPIE, 2002. http://dx.doi.org/10.1117/12.463421.
Texte intégralAnderson, Christopher P., Elena O. Glen, Cyrus Zeledon, Alexandre Bourassa, Yu Jin, Yizhi Zhu, Christian Vorwerk et al. « Optical single-shot readout of near-telecom qubits with five second coherence times ». Dans CLEO : Science and Innovations. Washington, D.C. : Optica Publishing Group, 2022. http://dx.doi.org/10.1364/cleo_si.2022.stu5f.1.
Texte intégralRapports d'organisations sur le sujet "Readout electronic"
Rossi, D., M. Widgoff et E. Alyea. Streamer tube readout electronics. Office of Scientific and Technical Information (OSTI), mars 1989. http://dx.doi.org/10.2172/7018875.
Texte intégralBaldini, Luca, Alessandro Brez, Thomas Himel, R. P. Johnson, Luca Latronico, Massimo Minuti, David Nelson et al. Fabrication of the GLAST Silicon Tracker Readout Electronics. Office of Scientific and Technical Information (OSTI), mars 2006. http://dx.doi.org/10.2172/877214.
Texte intégralEhrhart, Mathieu. Test of New Readout Electronics for the BONuS12 Experiment. Office of Scientific and Technical Information (OSTI), juillet 2017. http://dx.doi.org/10.2172/1417901.
Texte intégralTurisini, Matteo Turisini. The CLAS12 RICH readout electronics : design, development and test. Office of Scientific and Technical Information (OSTI), avril 2017. http://dx.doi.org/10.2172/1428138.
Texte intégralPaulos, J. J. Readout electronics for a hybrid central tracking chamber. Final report. Office of Scientific and Technical Information (OSTI), juillet 1992. http://dx.doi.org/10.2172/10104354.
Texte intégralHennig, Wolfgang. High-speed, multi-channel detector readout electronics for fast radiation detectors. Office of Scientific and Technical Information (OSTI), juin 2012. http://dx.doi.org/10.2172/1043826.
Texte intégralVa'vra, Jaroslav. Single Electron Detection in Quadruple-GEM Detector with Pad Readout. Office of Scientific and Technical Information (OSTI), mars 2001. http://dx.doi.org/10.2172/784889.
Texte intégralHanda, Takanobu. The Readout Electronics for Silicon Tracker of the GLAST Beam Test Engineering Model. Office of Scientific and Technical Information (OSTI), août 2000. http://dx.doi.org/10.2172/784908.
Texte intégralKambara, Hisanori. Search for second generation leptoquarks in $\sqrt{s}$ = 1.8-TeV $p^-$ pbar at CDF and silicon detector readout electronics development with ATLAS. Office of Scientific and Technical Information (OSTI), février 1998. http://dx.doi.org/10.2172/1421525.
Texte intégralTribble, Robert E., Lee G. Sobotka, Jeff C. Blackmon et Carlos A. Bertulani. Breakup of loosely bound nuclei at intermediate energies for nuclear astrophysics and the development of a position sensitive microstrip detector system and its readout electronics using ASICs technologies. Office of Scientific and Technical Information (OSTI), décembre 2015. http://dx.doi.org/10.2172/1233442.
Texte intégral