Littérature scientifique sur le sujet « Rate-shaping »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Rate-shaping ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Rate-shaping"
Chen, Zexin, Ming Tang, Songnian Fu, Yuncai Wang et Yuwen Qin. « Blind Identification of the Shaping Rate for Probabilistic Shaping QAM Signal ». IEEE Photonics Technology Letters 33, no 18 (15 septembre 2021) : 998–1001. http://dx.doi.org/10.1109/lpt.2021.3083989.
Texte intégralJörg, Christian, Joschka Schaub, Daniel Neumann et Stefan Pischinger. « Diesel Combustion Control via Rate Shaping ». MTZ worldwide 79, no 4 (9 mars 2018) : 16–21. http://dx.doi.org/10.1007/s38313-018-0001-0.
Texte intégralEleftheriadis, A., et P. Batra. « Dynamic rate shaping of compressed digital video ». IEEE Transactions on Multimedia 8, no 2 (avril 2006) : 297–314. http://dx.doi.org/10.1109/tmm.2005.864346.
Texte intégralLiu, Yi, Pengfei Huang, Alexander W. Bergman et Paul H. Siegel. « Rate-Constrained Shaping Codes for Structured Sources ». IEEE Transactions on Information Theory 66, no 8 (août 2020) : 5261–81. http://dx.doi.org/10.1109/tit.2020.2986318.
Texte intégralNeumann, Daniel, Stefan Pischinger, Joschka Schaub et Benedikt Heuser. « Flex-fuel Capability Using Digital Combustion Rate Shaping ». MTZ worldwide 80, no 5 (12 avril 2019) : 30–37. http://dx.doi.org/10.1007/s38313-019-0024-1.
Texte intégralHjorth, Jens, Christa Gall et Michał J. Michałowski. « SHAPING THE DUST MASS-STAR-FORMATION RATE RELATION ». Astrophysical Journal 782, no 2 (31 janvier 2014) : L23. http://dx.doi.org/10.1088/2041-8205/782/2/l23.
Texte intégralInoue, Masahiro, Masahisa Kawashima et Hideyoshi Tominaga. « Variable bit-rate video transmission using traffic shaping ». Electronics and Communications in Japan (Part I : Communications) 79, no 12 (1996) : 56–64. http://dx.doi.org/10.1002/ecja.4410791206.
Texte intégralGraziano, Barbara, Benedikt Heuser et Paul Grzeschik. « Improved Combustion in Diesel Engines by Injection Rate Shaping ». Auto Tech Review 4, no 11 (novembre 2015) : 24–29. http://dx.doi.org/10.1365/s40112-015-1026-2.
Texte intégralHuan-Yun Wei, Shih-Chiang Tsao et Ying-Dar Lin. « Assessing and improving TCP rate shaping over edge gateways ». IEEE Transactions on Computers 53, no 3 (mars 2004) : 259–75. http://dx.doi.org/10.1109/tc.2004.1261834.
Texte intégralGraziano, Barbara, Benedikt Heuser et Paul Grzeschik. « Improved Combustion in Diesel Engines by Injection Rate Shaping ». MTZ worldwide 76, no 3 (4 février 2015) : 4–9. http://dx.doi.org/10.1007/s38313-014-1022-y.
Texte intégralThèses sur le sujet "Rate-shaping"
Lee, Il-Sung. « Traffic shaping for variable-bit-rate MPEG-2 video ». Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ37266.pdf.
Texte intégralBallesteros, Mauricio. « Implementation alternatives for dual rate control systems with command shaping ». Thesis, Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/19053.
Texte intégralCanova, Lorenzo. « Generation and shaping of ultra-short, ultra-high contrast pulses for high repetition rate relativistic optics ». Phd thesis, Ecole Polytechnique X, 2009. http://pastel.archives-ouvertes.fr/pastel-00005764.
Texte intégralTao, Jianping. « PULSE SHAPED CONSTANT ENVELOPE 8-PSK MODULATION STUDY ». International Foundation for Telemetering, 1997. http://hdl.handle.net/10150/609753.
Texte intégralThe most bandwidth-efficient communication methods are imperative to cope with the congested frequency bands. Pulse Shaping methods have excellent effects on narrowing bandwidth and increasing band utilization. The position of the baseband filters for the pulse shaping is crucial. Filters after the modulator will have non-constant envelope and before the modulator will have constant envelope. These two types have different effects on narrowing the bandwidth and producing bit errors. The constant envelope 8 PSK is used throughout the simulations and is compared with the non-constant envelope results. This work provides simulation results of spectrum analysis and measure of bit errors produced by pulse shaping in an AWGN channel.
Bansal, Dushyant. « Third-Party TCP Rate Control ». Thesis, University of Waterloo, 2005. http://hdl.handle.net/10012/803.
Texte intégralThe method that gives maximum control when performing traffic shaping is using an inline traffic shaper. An inline traffic shaper sits in the middle of any flow, allowing packets to pass through it and, with policy-limited freedom, inspects and modifies all packets as it pleases. However, a number of practical issues such as hardware reliability or ISP policy, may prevent such a solution from being employed. For example, an ISP that does not fully trust the quality of the traffic shaper would not want such a product to be placed in-line with its equipment, as it places a significant threat to its business. What is required in such cases is third-party rate control.
Formally defined, a third-party rate controller is one that can see all traffic and inject new traffic into the network, but cannot remove or modify existing network packets. Given these restrictions, we present and study a technique to control TCP flows, namely triple-ACK duplication. The triple-ACK algorithm allows significant capabilities to a third-party traffic shaper. We provide an analytical justification for why this technique works under ideal conditions and demonstrate via simulation the bandwidth reduction achieved. When judiciously applied, the triple-ACK duplication technique produces minimal badput, while producing significant reductions in bandwidth consumption under ideal conditions. Based on a brief study, we show that our algorithm is able to selectively throttle one flow while allowing another to gain in bandwidth.
Cavallone, Marco. « Application of laser-plasma accelerated beams to high dose-rate radiation biology ». Thesis, Institut polytechnique de Paris, 2020. http://www.theses.fr/2020IPPAX063.
Texte intégralCancer is the second leading cause of death globally, accounting for an estimated 9.6 million deaths, or one in six deaths, in 2018. Besides surgery and chemotherapy, radiotherapy is one of the major treatment modality. It consists in the use of ionising radiation to kill cancerous cells by depositing energy into the tumour and destroying the genetic material that controls how cells grow and divide. While both cancerous and healthy cells are damaged by radiation, the goal of radiotherapy is to increase the treatment selectivity by sparing as much as possible the healthy tissues. Optimisation of the selectivity reposes on several aspects, including spatial optimisation of the dose, precision of imaging techniques and dosimetry instruments, use of different radiations and temporal structures of dose delivery. In particular, the role of the dose-rate and the total irradiation time has not been extensively explored yet.Clinical accelerators typically deliver the dose with a dose rate around few Gy/min, leading to exposure times in the order of few minutes to deliver a therapeutic dose. While the effect of a reduction of the dose rate in the order of cGy/min is well known, the effect of high-dose rate, fast irradiation on living cells still need to be elucidated. Evidences of an effect of the high dose-rate on the biological response have been recently observed in many studies. In particular, in-vivo studies performed with electrons and photons produced by accelerator prototypes have shown that delivering the prescribed dose in a short exposure time (<500ms) and at a high dose-rate (>40Gy/s) increases the treatment selectivity by reducing the occurrence of secondary effects on healthy tissues compared to conventional treatments with the same total dose. Although theoretical explanations underpinning such phenomenon are still under discussion, the so-called FLASH protocol has been successfully tested with the first human patient in 2019, paving the way for further research in this domain. These important results point out the importance of the dose delivery modality on the treatment selectivity and the potential benefit that high dose-rate protocols may bring to clinics, asking for a deeper understanding of the physico-chemical and biological processes following fast dose deposition.In this scenario, Laser-Driven Particle (LDP) beams represent a unique tool to shed some light on the radiobiological response following high-dose rate irradiation. LDP sources are produced by focusing an ultra-short (~fs) and ultra-intense (1019 W/cm2) laser pulse on a solid or gaseous thin target (~μm), producing proton and electron bunches with duration of respectively a few picoseconds and a few femtoseconds. These characteristics allow the reach of extremely high peak dose-rate in the pulse of the order of ~109 Gy/s in comparison with conventional and FLASH treatment protocols. For this reason, LDP sources have been receiving great attention in the last decade, but their radiobiological effect is still debated and further systematic studies are required.This thesis discusses the potential of both Laser-Accelerated Protons (LAP) and Laser-Accelerated Electrons (LAE) produced by different types of commercially available high-power lasers systems. In particular, it presents experimental and theoretical studies carried out with three different types of LDP beams, i.e. Hz LAPs, single-shot LAPs and kHz LAEs, enabling different temporal modalities of dose delivery. The goal is to address some of the main issues related to the application of such sources to radiation biology and show viable solutions and irradiation protocols to perform systematic radiobiology studies. Such issues include accurate characterisation of the source, optimisation of the dose distribution at the biological target through the design of adapted transport beamlines and investigation of the behaviour of dosimetric instruments for high dose-rate dosimetry
Von, Eden Elric Omar. « Optical arbitrary waveform generation using chromatic dispersion in silica fibers ». Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/24780.
Texte intégralDi, Maio Yoan. « Etude de l'interaction laser-matière en régime d'impulsions ultra-courtes : application au micro-usinage de matériaux à destination de senseurs ». Phd thesis, Université Jean Monnet - Saint-Etienne, 2013. http://tel.archives-ouvertes.fr/tel-00994999.
Texte intégralMheich, Zeina. « Schémas pratiques pour la diffusion (sécurisée) sur les canaux sans fils ». Phd thesis, Université Paris Sud - Paris XI, 2014. http://tel.archives-ouvertes.fr/tel-01059512.
Texte intégralLiao, Yung-Shen, et 廖永森. « Improving Yield Rate of Magnesium Shaping Shaping Firm--A Case Study from Taiwan ». Thesis, 2008. http://ndltd.ncl.edu.tw/handle/98161285740983693685.
Texte intégral長庚大學
企業管理研究所
96
ABSTRACT Superior quality is the lifeblood of magnesium alloy factory. Magnesium alloy industry has experienced from prospering to declining for the past decades in Taiwan. Besides the macroeconomic factor, another main reason is unable to do mass production. Even though a firm has a chance to do mass production, the yield rate is unacceptable low which results in lots of unnecessarily reworked processes and high inventory stocks. Consequently, the production cost goes higher than the selling price. With difficulties to bearing losing money for a long term, some of Taiwanese magnesium alloy factories have moved to China. The remaining did not have choices but close their business. However, solving the superficial questions cannot save the declining industry, only finding out the root cause and solving it out could help to sustainable. The case company utilized its existing quality assurance system and the manufacture system as well as the staff meetings throughout the whole yield improvement project. Subject to no further expenses being increased, lots of correlative data were collected and staff interviews were conducted. Then, the project team applied Seven Basic Quality Tools and Why-Why methods to analyze the problems, to look into superficial and latent causes of poor quality, and come out with counter plans and suggestions. The root causes of poor quality are not only the superficial questions, but also the technical, the procedure flow, the management, and the strategy questions. One of key root causes lies in “people”. Therefore, this research suggests that the case company must reform in China, by implementing source managements, such as the staff confirmation, total quality Management, total productive Management and so on. In addition, integrating equipments, productions, and business management is necessary. Fully utilizing all resources and completely eliminating the factors which could cause poor quality gives the case company an opportunity to sustain competitiveness.
Livres sur le sujet "Rate-shaping"
Bhagat, Rabi S. Economic and Political Geography. Oxford University Press, 2017. http://dx.doi.org/10.1093/acprof:oso/9780190241490.003.0002.
Texte intégralAxilrod, Stephen H. The Federal Reserve. Oxford University Press, 2013. http://dx.doi.org/10.1093/wentk/9780199934485.001.0001.
Texte intégralChapitres de livres sur le sujet "Rate-shaping"
Albin Rajasingham, Thivaharan. « Combustion Rate Shaping Control ». Dans Nonlinear Model Predictive Control of Combustion Engines, 313–27. Cham : Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68010-7_15.
Texte intégralKim, Minjung, et Yucel Altunbasak. « Optimal Dynamic Rate Shaping for Compressed Video Streaming ». Dans Networking — ICN 2001, 786–94. Berlin, Heidelberg : Springer Berlin Heidelberg, 2001. http://dx.doi.org/10.1007/3-540-47734-9_78.
Texte intégralChia-Chiang, Ho, et Wu Ja-Ling. « A Foveation-Based Rate Shaping Mechanism for MPEG Videos ». Dans Advances in Multimedia Information Processing — PCM 2002, 485–92. Berlin, Heidelberg : Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/3-540-36228-2_60.
Texte intégralPei-chun Chen, Trista, Tsuhan Chen et Hsu Yuh-Feng. « Life after Video Coding Standards : Rate Shaping and Error Concealment ». Dans Recent Advances in Visual Information Systems, 194–206. Berlin, Heidelberg : Springer Berlin Heidelberg, 2002. http://dx.doi.org/10.1007/3-540-45925-1_18.
Texte intégralAtzler, Frank. « Diesel Stratification and Combustion : “Cookbook” of best rate shaping strategies ». Dans Der Verbrennungsmotor - ein Antrieb mit Vergangenheit und Zukunft, 363–408. Wiesbaden : Springer Fachmedien Wiesbaden, 2017. http://dx.doi.org/10.1007/978-3-658-19291-4_20.
Texte intégralHamdi, Maher, James W. Roberts et Pierre Rolin. « GoP-Scale Rate Shaping for MPEG Transmission in the B-ISDN ». Dans Multimedia Communications and Video Coding, 401–8. Boston, MA : Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-0403-6_49.
Texte intégralNeedham, David, Dan Mellors, Tony Williams, Thomas Cawkwell et Simon Tullis. « Dynamic rate shaping – one diesel common-rail injector for all combustion strategies ». Dans Proceedings, 335–57. Wiesbaden : Springer Fachmedien Wiesbaden, 2019. http://dx.doi.org/10.1007/978-3-658-25889-4_20.
Texte intégralWang, Min, Qin Zou et Xiaoqiang Tu. « A Novel Constellation Shaping Method to Reduce PAPR for Rate Compatible Modulation ». Dans Machine Learning and Intelligent Communications, 15–24. Cham : Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-52730-7_2.
Texte intégralNeumann, Daniel, Paul Muthyala, Christian Frenken, Joschka Schaub, Christian Jörg et Matthias Kötter. « Flex-fuel capability via advanced digital combustion rate shaping and airpath control ». Dans Proceedings, 333–50. Wiesbaden : Springer Fachmedien Wiesbaden, 2019. http://dx.doi.org/10.1007/978-3-658-26528-1_20.
Texte intégralEleftheriadis, Alexandros, et Dimitris Anastassiou. « Meeting arbitrary QoS constraints using Dynamic Rate Shaping of coded digital video ». Dans Lecture Notes in Computer Science, 88–100. Berlin, Heidelberg : Springer Berlin Heidelberg, 1995. http://dx.doi.org/10.1007/bfb0019256.
Texte intégralActes de conférences sur le sujet "Rate-shaping"
Chen, Zexin, Jianing Lu, Songnian Fu, M. Tang, D. Liu et C. Lu. « Blind Shaping Rate Identification for Probabilistic Shaping Quadrature Amplitude Modulation Formats ». Dans Asia Communications and Photonics Conference. Washington, D.C. : OSA, 2020. http://dx.doi.org/10.1364/acpc.2020.s4i.5.
Texte intégralRitter, Dennis, Metin Korkmaz, Heinz Pitsch, Dirk Abel et Thivaharan Albin. « Optimization-based fuel injection rate digitalization for combustion rate shaping ». Dans 2019 American Control Conference (ACC). IEEE, 2019. http://dx.doi.org/10.23919/acc.2019.8815184.
Texte intégralLe, Dat, Jin Shen, Neha Ruikar et Gregory M. Shaver. « Dynamic modeling of piezoelectric injector-enabled rate shaping ». Dans 2013 American Control Conference (ACC). IEEE, 2013. http://dx.doi.org/10.1109/acc.2013.6580395.
Texte intégralTrista Pei-chun Chen et Tsuhan Chen. « Adaptive joint source-channel coding using rate shaping ». Dans IEEE International Conference on Acoustics Speech and Signal Processing ICASSP-02. IEEE, 2002. http://dx.doi.org/10.1109/icassp.2002.1006160.
Texte intégralChen, Trista Pei-chun, et Tsuhan Chen. « Adaptive joint source-channel coding using rate shaping ». Dans Proceedings of ICASSP '02. IEEE, 2002. http://dx.doi.org/10.1109/icassp.2002.5745020.
Texte intégralBright, Charles B., et Jon C. Garza. « Possible Very High Speed Rate Shaping Fuel Injector ». Dans Powertrain & Fluid Systems Conference and Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2007. http://dx.doi.org/10.4271/2007-01-4113.
Texte intégralColdren, D. R., S. R. Schuricht et R. A. Smith. « Hydraulic Electronic Unit Injector with Rate Shaping Capability ». Dans SAE 2003 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States : SAE International, 2003. http://dx.doi.org/10.4271/2003-01-1384.
Texte intégralGoukhshtein, Maxim, Stark C. Draper et Jeebak Mitra. « Rate-Energy Optimal Probabilistic Shaping Using Linear Codes ». Dans 2022 IEEE International Symposium on Information Theory (ISIT). IEEE, 2022. http://dx.doi.org/10.1109/isit50566.2022.9834402.
Texte intégralMahalingam, Rajyalakshmi, Wei Tu et Eckehard Steinbach. « RD-Optimized Rate Shaping for Multiple Scalable Video Streams ». Dans Multimedia and Expo, 2007 IEEE International Conference on. IEEE, 2007. http://dx.doi.org/10.1109/icme.2007.4285020.
Texte intégralBenson, C. R., R. M. Dunbar, M. J. Ryan et M. R. Frater. « Divergent beam shaping for high data-rate underwater communications ». Dans OCEANS 2009-EUROPE (OCEANS). IEEE, 2009. http://dx.doi.org/10.1109/oceanse.2009.5278222.
Texte intégral