Bibliographies thématiques / R1233zd(E) / Articles de revues

Articles de revues sur le sujet « R1233zd(E) »

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : R1233zd(E).
Auteur : Grafiati
Publié le 10 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « R1233zd(E) ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Li, Shengyu, et Jun Lu. « A Theoretical Comparative Study of Vapor-Compression Refrigeration Cycle using Al2O3 Nanoparticle with Low-GWP Refrigerants ». Entropy 24, no 12 (13 décembre 2022) : 1820. http://dx.doi.org/10.3390/e24121820.

Texte intégral
Résumé :
Nanorefrigerant is a mixture of nanoparticles and pure refrigerant, which can increase heat transfer characteristics in refrigeration and air conditioning equipment. The performance of four different Al2O3 nanorefrigerants and their pure fluids (R600a, R134a, R1234yf, and R1233zd(E)) is analyzed in a vapor-compression refrigeration cycle. The enthalpy of a nanorefrigerant in the refrigeration cycle is calculated by using the prediction method based on the density of nanorefrigerant. A numerical model is established for the thermodynamic analysis, and the results show that adding nanoparticles to the pure refrigerant enhances heat transfer in heat exchangers, increases cooling capacity, reduces compressor power consumption, and finally improves the performance of the refrigeration system. The COP improvement of R1233zd(E) + Al2O3 nanorefrigerant is the highest, and the COP improvement of R134a + Al2O3 and R1234yf + Al2O3 are close to each other. When the mass fraction of Al2O3 nanoparticles increases to 0.30%, the COP of R1233zd(E) and R600a increases by more than 20%; the maximum exergy efficiency is 38.46% for R1233zd(E) + Al2O3, and the minimum exergy efficiency is 27.06% for pure R1234yf. The results provide a basis for the application of nanorefrigerants in the vapor compression refrigeration cycle.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Liu, Yu, et Xiaoming Zhao. « Measurement of the heat capacity of R1233zd(E) ». International Journal of Refrigeration 86 (février 2018) : 127–32. http://dx.doi.org/10.1016/j.ijrefrig.2017.11.015.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Lee, Keon Hu, Seok Ho Yoon, Chan Ho Song, Ook Joong Kim et Dong Ho Kim. « An Experimental Study on Material Compatibility of R1233zd(E) with Lubricant/Polymers ». Korean Journal of Air-Conditioning and Refrigeration Engineering 31, no 11 (30 novembre 2019) : 497–505. http://dx.doi.org/10.6110/kjacr.2019.31.11.497.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Racovitza, Alexandru, Horatiu Pop, Valentin Apostol, Tudor Prisecaru et Daniel Taban. « Comparison between Organic Working Fluids in order to Improve Waste Heat Recovery from Internal Combustion Engines by means of Rankine Cycle Systems ». Revista de Chimie 71, no 1 (7 février 2020) : 113–21. http://dx.doi.org/10.37358/rc.20.1.7821.

Texte intégral
Résumé :
The present works deals with waste heat recovery from internal combustion engines using Rankine cycle systems where working fluid are organic liquids (ORC). The first part of the paper presents the ORC technology as one of the most suitable procedure for waste heat recovery from exhaust gas of internal combustion engine (ICE). The particular engine considered in the present work is a turbocharged compression ignition engine mounted on an experimental setup. The working fluids for ORC system are: isobutene, propane, RE245fa2, RE245cb2, R245fa, R236fa, R365mfc, R1233zd(E), R1234yf and R1234ze(Z). Experimental data derived from the experimental setup has been used for 40%, 55% and 70% engine load. This papers focusses on superheating increment, on thermal efficiency and on net power output, obtained with each working fluids in Rankine cycle. Results point out the superheating increment that gives the highest thermal efficiency for each working fluid. The highest thermal efficiency is achieved in case of using R1233zd(E) as working fluid. In case of using R1233zd(E) as working fluid at 40 % load of the engine, the output power of the Rankine cycle is 3.6 kW representing 6.2 %, from the rated power at this load; at 55% load it is 5.7 kW representing 6.7 % the rated power and at 70% it is 6.7 kW representing 6.5 % from the rated power. Future perspectives are given.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Elbarghthi, Anas F. A., Mohammad Yousef Hdaib et Václav Dvořák. « Heat Transfer Analysis between R744 and HFOs inside Plate Heat Exchangers ». Entropy 24, no 8 (18 août 2022) : 1150. http://dx.doi.org/10.3390/e24081150.

Texte intégral
Résumé :
Plate heat exchangers (PHE) are used for a wide range of applications, thus utilizing new and unique heat sources is of crucial importance. R744 has a low critical temperature, which makes its thermophysical properties variation smoother than other supercritical fluids. As a result, it can be used as a reliable hot stream for PHE, particularly at high temperatures. The local design approach was constructed via MATLAB integrated with the NIST database for real gases. Recently produced HFOs (R1234yf, R1234ze(E), R1234ze(Z), and R1233zd(E)) were utilized as cold fluids flowing through three phases: Liquid-phase, two-phase, and gas-phase. A two-step study was performed to examine the following parameters: Heat transfer coefficients, pressure drop, and effectiveness. In the first step, these parameters were analyzed with a variable number of plates to determine a suitable number for the next step. Then, the effects of hot stream pressure and cold stream superheating difference were investigated with variable cold channel mass fluxes. For the first step, the results showed insignificant differences in the investigated parameters for the number of plates higher than 40. Meanwhile, the second step showed that increasing the hot stream pressure from 10 to 12 MPa enhanced the two-phase convection coefficients by 17%, 23%, 75%, and 50% for R1234yf, R1234ze(E), R1234ze(Z), and R1233zd(E), respectively. In contrast, increasing the cold stream superheating temperature difference from 5 K to 20 reduced the two-phase convection coefficients by 14%, 16%, 53%, and 26% for R1234yf, R1234ze(E), R1234ze(Z), and R1233zd(E), respectively. Therefore, the R744 is suitable for PHE as a driving heat source, particularly at higher R744 inlet pressure and low cold stream superheating difference.
Styles APA, Harvard, Vancouver, ISO, etc.
6

Tsvetkov, O. B., V. V. Mitropov, A. O. Prostorova et Yu A. laptev. « Thermal conductivity prediction of Trans-1-Chloro-3,3,3-Trifluoropropene (R1233zd (E)) ». Journal of Physics : Conference Series 1683 (décembre 2020) : 032021. http://dx.doi.org/10.1088/1742-6596/1683/3/032021.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Righetti, Giulia, Giovanni A. Longo, Claudio Zilio, Ryo Akasaka et Simone Mancin. « R1233zd(E) flow boiling inside a 4.3 mm ID microfin tube ». International Journal of Refrigeration 91 (juillet 2018) : 69–79. http://dx.doi.org/10.1016/j.ijrefrig.2018.04.020.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

He, Jiacheng, Chaobin Dang et Eiji Hihara. « Supercritical heat transfer characteristics of R1233zd(E) in vertically upward flow ». International Journal of Heat and Mass Transfer 127 (décembre 2018) : 497–505. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.07.078.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Kedzierski, M. A., et L. Lin. « Pool boiling of R515A, R1234ze(E), and R1233zd(E) on a reentrant cavity surface ». International Journal of Heat and Mass Transfer 161 (novembre 2020) : 120252. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2020.120252.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Kondou, Chieko, Ryuichi Nagata, Noriko Nii, Shigeru Koyama et Yukihiro Higashi. « Surface tension of low GWP refrigerants R1243zf, R1234ze(Z), and R1233zd(E) ». International Journal of Refrigeration 53 (mai 2015) : 80–89. http://dx.doi.org/10.1016/j.ijrefrig.2015.01.005.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
11

Wang, Tao, Xiangyang Liu, Maogang He et Ying Zhang. « Molecular dynamics simulation of thermophysical properties and condensation process of R1233zd(E) ». International Journal of Refrigeration 112 (avril 2020) : 341–47. http://dx.doi.org/10.1016/j.ijrefrig.2019.12.029.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
12

Matuszewska, Dominika, et Piotr Olczak. « Evaluation of Using Gas Turbine to Increase Efficiency of the Organic Rankine Cycle (ORC) ». Energies 13, no 6 (22 mars 2020) : 1499. http://dx.doi.org/10.3390/en13061499.

Texte intégral
Résumé :
Power conversion systems based on the Organic Rankine Cycle (ORC) have been identified as a potential technology especially in converting low-grade renewable sources or waste heat. However, it is necessary to improve efficiency of ORC systems. This paper focuses on use of low geothermal resources (for temperature range of 80–128 °C and mass flow 100 kg/s) by using modified ORC. A modification of conventional binary power plant is conducted by combining gas turbines to increase quality of steam from a geothermal well. An analysis has been conducted for three different working fluids: R245fa, R1233zd(E) and R600. The paper discusses the impact of parameter changes not only on system efficiency but on other performance indicators. The results were compared with a conventional geothermal Organic Rankine Cycle (ORC). Increasing of geothermal steam quality by supplying exhaust gas from a gas turbine to the installation has a positive effect on the system efficiency and power. The highest efficiency of the modified ORC system has been obtained for R1233zd(E) as a working fluid and it reaches values from 12.21% to 19.20% (depending on the temperature of the geothermal brine). In comparison, an ORC system without gas turbine support reaches values from 9.43% to 17.54%.
Styles APA, Harvard, Vancouver, ISO, etc.
13

Jeon, Dong-Soon, et Ji-Woon Ko. « An Analysis of Distribution Characteristics According to at Falling Film Type Condenser by Shape of Distribution Plate for R1233zd(E) Refrigerant Gas ». KSFM Journal of Fluid Machinery 25, no 1 (28 février 2022) : 36–42. http://dx.doi.org/10.5293/kfma.2022.25.1.036.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
14

Li, Da, Qiang Sun, Ke Sun, Guodong Zhang, Shuzhan Bai et Guoxiang Li. « Diesel engine waste heat recovery system comprehensive optimization based on system and heat exchanger simulation ». Open Physics 19, no 1 (1 janvier 2021) : 331–40. http://dx.doi.org/10.1515/phys-2021-0039.

Texte intégral
Résumé :
Abstract To further improve the thermal efficiency of diesel engines, a waste heat recovery system model utilizing organic Rankine cycle (ORC) is constructed and verified through system bench test and heat exchanger bench test. To recover waste heat from diesel engine exhaust, ethanol, cyclopentane, cyclohexane, R1233zd (E), and R245fa were selected for comparison. The quality of heat source, the quality of evaporator, the system output, and the system complicity were taken as variables for comparison. Analysis shows that for ORC systems without recuperator, ethanol system has the best system output of the five in a wide operation temper range, with the highest exergy efficiency of 24.1%, yet the exergy efficiency increase after the application of recuperator, 9.0%, is limited. For low temperature exhaust, cyclopentane system has the best performance with or without recuperator, and the cyclopentane system with recuperator has the best performance in terms of exergy efficiency, 27.6%, though complex heat exchangers are also required for high power output. The system output of the R1233zd system is better than the R245fa system, yet the advantage of low evaporate temperature can be better utilized for low quality waste heat recovery.
Styles APA, Harvard, Vancouver, ISO, etc.
15

Huang, Xiaohui, Ji Zhang et Fredrik Haglind. « Experimental analysis of hydrofluoroolefin zeotropic mixture R1234ze(E)/R1233zd(E) condensation in a plate heat exchanger ». International Communications in Heat and Mass Transfer 135 (juin 2022) : 106073. http://dx.doi.org/10.1016/j.icheatmasstransfer.2022.106073.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
16

Di Nicola, Giovanni, Laura Fedele, J. Steven Brown, Sergio Bobbo et Gianluca Coccia. « Saturated Pressure Measurements of trans-1-Chloro-3,3,3-trifluoroprop-1-ene (R1233zd(E)) ». Journal of Chemical & ; Engineering Data 62, no 9 (15 février 2017) : 2496–500. http://dx.doi.org/10.1021/acs.jced.6b00916.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
17

Talluri, Lorenzo, Olivier Dumont, Giampaolo Manfrida, Vincent Lemort et Daniele Fiaschi. « Experimental investigation of an Organic Rankine Cycle Tesla turbine working with R1233zd(E) ». Applied Thermal Engineering 174 (juin 2020) : 115293. http://dx.doi.org/10.1016/j.applthermaleng.2020.115293.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
18

You, Xin Yu, Jiong Hui Liu, Nan Hua, Ji Wang, Rong Ji Xu, Guang Xu Yu et Hua Sheng Wang. « Experimental study on flow boiling of refrigerant R1233zd(E) in microchannels : Heat transfer ». Applied Thermal Engineering 182 (janvier 2021) : 116083. http://dx.doi.org/10.1016/j.applthermaleng.2020.116083.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
19

Ju, Fujun, Xiaowei Fan, Yaping Chen, Honglin Zhang, Tuanjie Wang et Xiangyang Tang. « Performance assessment of heat pump water heaters with R1233zd(E)/HCs binary mixtures ». Applied Thermal Engineering 123 (août 2017) : 1345–55. http://dx.doi.org/10.1016/j.applthermaleng.2017.05.137.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
20

Lyu, Long, Wu Chen, Ankang Kan, Yuan Zhang, Song Xue et Jingbin Zeng. « Investigation of a Dual-Loop ORC for the Waste Heat Recovery of a Marine Main Engine ». Energies 15, no 22 (9 novembre 2022) : 8365. http://dx.doi.org/10.3390/en15228365.

Texte intégral
Résumé :
As carbon dioxide emissions arising from fossil energy consumption and fossil fuels are gradually increased, it is important for the low-carbon operation of ships to recover diesel engine waste heat. A newly developed dual-loop organic Rankine cycle (ORC) system to recover waste heat from a marine main engine (M/E) was designed in this paper. The exhaust gas (EG) heat was recovered by the high-temperature (HT) loop. The jacket cooling water (JCW) heat and the condensation heat of the HT loop were recovered by the low-temperature (LT) loop. Toluene, cyclohexane, benzene, R1233zd (E), R245fa, and R227ea were selected as the working fluids. The influence of the condenser thermal parameters on the LT loop was analyzed using the pinch point method. The performance of the dual-loop ORC was investigated under various working fluid combinations. The maximum net power of the HT loop can reach 253.4 kW when using cyclohexane as the working fluid, and the maximum thermal efficiency of the HT loop can reach 18.5% with benzene as the working fluid. Meanwhile, higher condensation temperatures and levels of condensation heat of the HT loop have a positive effect on the performance of the LT loop. However, in most conditions, the HT loop condensation heat could not provide enough heat for the LT loop’s working fluid to start the boiling process. The total net power of the dual-loop ORC system was 410.6 kW with Cyclohexane in the HT loop and R1233zd (E) in the LT loop, resulting in a 10.9% improvement in the marine main engine thermal efficiency.
Styles APA, Harvard, Vancouver, ISO, etc.
21

Mariani, Antonio, Biagio Morrone, Davide Laiso, Maria Vittoria Prati et Andrea Unich. « Waste Heat Recovery in a Compression Ignition Engine for Marine Application Using a Rankine Cycle Operating with an Innovative Organic Working Fluid ». Energies 15, no 21 (25 octobre 2022) : 7912. http://dx.doi.org/10.3390/en15217912.

Texte intégral
Résumé :
The exhaust heat of energy conversion systems can be usefully recovered by Organic Rankine Cycles (ORC) instead of wasting it into the environment, with benefits in terms of system efficiency and environmental impact. Rankine cycle technology, consolidated in stationary power plants, has not yet spread out into transport applications due to the layout limitations and to the necessity of containing the size and weight of the ORC system. The authors investigated an ORC system bottoming a compression ignition engine for marine application. The exhaust mass flow rate and temperature, measured at different engine loads, have been used as inputs for modeling the ORC plant in a Simulink environment. An energy and exergy analysis of the ORC was performed, as well as the evaluation of the ORC power at different engine loads. Two different working fluids were considered: R1233zd(e), an innovative fluid belonging to the class of hydrofluoroolefin, still in development but interesting due to its low flammability, health hazard, and environmental impact, and R601, a hydrocarbon showing a benchmark thermodynamic performance but highly flammable, considered as a reference for comparison. Three plant configurations were investigated: single-pressure, dual-pressure, and reheating. The results demonstrated that the dual-pressure configuration achieves the highest exploitation of exhaust heat. R1233zd(e) produced an additional mechanical power of 8.0% with respect to the engine power output, while, for R601, the relative contribution of the ORC power was 8.7%.
Styles APA, Harvard, Vancouver, ISO, etc.
22

Morales-Espejel, Guillermo E., Ralph Meeuwenoord, Armando Félix Quiñonez et Rudolf Hauleitner. « Film thickness and traction measurements of refrigerant R1233zd used as lubricant in elastohydrodynamic conditions ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science 229, no 2 (7 mai 2014) : 244–53. http://dx.doi.org/10.1177/0954406214533530.

Texte intégral
Résumé :
This study presents film thickness and friction measurements of the refrigerant R1233zd (E-1-chloro-3,3,3,trifluoropropene-1) in a tribological contact. For the film thickness, optical interferometry technique with glass–steel contact is used in a ball-disc configuration, whilst for the traction measurements (Stribeck and traction curves), a contact ceramic ball–steel disc is used. In both cases, the Wedeven Associates Machines-5 tribometer is employed. An attempt to model the film thickness results is also carried out. The model gives a reasonably good prediction with respect to the experiments.
Styles APA, Harvard, Vancouver, ISO, etc.
23

Chen, Ting, et Oh Kyung Kwon. « Experimental Analyses of Moderately High-Temperature Heat Pump Systems with R245fa and R1233zd(E) ». Energy Engineering 119, no 6 (2022) : 2231–42. http://dx.doi.org/10.32604/ee.2022.021289.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
24

Perkins, Richard A., Marcia L. Huber et Marc J. Assael. « Measurement and Correlation of the Thermal Conductivity oftrans-1-Chloro-3,3,3-trifluoropropene (R1233zd(E)) ». Journal of Chemical & ; Engineering Data 62, no 9 (29 mars 2017) : 2659–65. http://dx.doi.org/10.1021/acs.jced.7b00106.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
25

Falbo, Luigi, et Sergio Bova. « Performance analysis of a bio-diesel fired engine bottoming with micro-ORC ». Journal of Physics : Conference Series 2385, no 1 (1 décembre 2022) : 012116. http://dx.doi.org/10.1088/1742-6596/2385/1/012116.

Texte intégral
Résumé :
Abstract The purpose of this work is to investigate the performance in terms of electric power and electric efficiency of a 11kW bio-diesel internal combustion engine (ICE) coupled with a micro Organic Rankine Cycle (ORC) both in design and off-design conditions. A zero dimensional (0D) thermodynamical engine model has been developed to predict the electric and thermal power with 100% biodiesel fuel (B100). B100 has been selected for the performance analysis of the integrated system due its lower environmental impact. For the ORC system, a subcritical thermodynamic model has been used with various working fluid (R245fa, R1233zd(E), R134a, R1234ze(E) and R1234ze(Z)). A plate heat exchanger (PHEX) has been adopted as evaporator of the organic cycle to directly recover the thermal power of the exhaust gas. Both models have been validated using experimental data from literature. Two different expander configurations, dynamic and volumetric, has been investigated. Model validations show good agreement with the experimental and literature data, respectively. Moreover, the results highlight that the micro-ORC could achieve a maximum electric efficiency of about 7% at full load with R1234ze(Z). Although at part load the dynamic expander show better performance, the volumetric expander has been selected for the system analysis due to its real suitability for small and micro scale ORC. Combined system results show a maximum enhancement of engine efficiency of about 5%, and better results, in terms of good compromise between electric efficiency and operating range width, has been shown for R1233zd(E). Furthermore, the direct coupling of the PHEX with the exhaust gases allows to have heat exchange evaporator areas below 2 m2 for all analysed fluids.
Styles APA, Harvard, Vancouver, ISO, etc.
26

Ji, Wen-Tao, Shi-Ming Xiong, Li Chen, Chuang-Yao Zhao et Wen-Quan Tao. « Effect of subsurface tunnel on the nucleate pool boiling heat transfer of R1234ze(E), R1233zd(E) and R134a ». International Journal of Refrigeration 122 (février 2021) : 122–33. http://dx.doi.org/10.1016/j.ijrefrig.2020.11.002.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
27

Ko, Ji-Woon, Dong-Soon Jeon, Young-Lyul Kim et Seon-Chang Kim. « Experimental study on film condensation heat transfer characteristics of R1234ze(E) and R1233zd(E) over horizontal plain tubes ». Journal of Mechanical Science and Technology 32, no 1 (janvier 2018) : 527–34. http://dx.doi.org/10.1007/s12206-017-1254-2.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
28

Zhao, Runze, Zikang Zhang, Shuaicheng Zhao, Haichuan Cui, Zhichun Liu et Wei Liu. « Experimental study of flat-disk loop heat pipe with R1233zd(E) for cooling terrestrial electronics ». Applied Thermal Engineering 197 (octobre 2021) : 117385. http://dx.doi.org/10.1016/j.applthermaleng.2021.117385.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
29

Meng, Xianyang, Chenyang Wen et Jiangtao Wu. « Measurement and correlation of the liquid viscosity of trans-1-chloro-3,3,3-trifluoropropene (R1233zd(E)) ». Journal of Chemical Thermodynamics 123 (août 2018) : 140–45. http://dx.doi.org/10.1016/j.jct.2018.04.001.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
30

Yin, Jianguo, Jinjun Ke, Guanjia Zhao et Suxia Ma. « Experimental vapor pressures and gaseous pvT properties of trans-1-Chloro-3,3,3-trifluoropropene (R1233zd(E)) ». International Journal of Refrigeration 121 (janvier 2021) : 253–57. http://dx.doi.org/10.1016/j.ijrefrig.2020.09.010.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
31

Mahmoudian, Jafar, Federico Mazzelli, Andrea Rocchetti et Adriano Milazzo. « A heat-powered ejector chiller working with low-GWP fluid R1233zd(E) (Part2 : Numerical analysis) ». International Journal of Refrigeration 121 (janvier 2021) : 216–27. http://dx.doi.org/10.1016/j.ijrefrig.2020.10.016.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
32

Ovsyannik, A. V., et V. P. Kliuchinski. « Thermodynamic Analysis of Ozone-Safe Low Boiling Working Media for Turbo-Expander Plants ». ENERGETIKA. Proceedings of CIS higher education institutions and power engineering associations 63, no 6 (2 décembre 2020) : 554–62. http://dx.doi.org/10.21122/1029-7448-2020-63-6-554-562.

Texte intégral
Résumé :
The article considers 46 low-boiling working media (LBWM) with zero potential for ozone layer destruction. Out of them, 14 ones are single-component hydrofluorocarbon refrigerants, 28 ones are multi-component mixtures of hydrofluorocarbon refrigerants, and the four ones are native refrigerants. Thermodynamic analysis of working media based on the classical turbo-expander scheme with a heat exchanger designed to cool the superheated LBWM that has left the turbo-expander has been performed. For this scheme, a cycle is constructed in T–s-coordinates. The LBWM was compared using the exergetic coefficient of efficiency (KE). In the course of the study, it was found that for some LBWM, the sequence of location of the exergetic efficiencydependences on temperature at thermodynamically optimal working medium pressures is preserved over the entire temperature range under study (from 100 to 300 оC). In other words,if the working medium has the highest exergetic efficiency coefficient, then this property is inherent in it at any temperature in a given interval. It is proposed to perform the analysis of the LBWM for exergetic efficiency at an arbitrarily selected temperature (250 оC). The study demonstrated that the highest exergetic efficiency of natural refrigerants is R600A (50.25 %), among single component hydrofluorocarbon refrigerants – R245FA (50.00 %), R1233ZD(E) (49.91 %), R236EA (49.59 %), among multi-component mixtures of hydrofluorocarbon refrigerants – R429A (47.92 %), R430A (47.49 %) and R423A (47.47 %). Out of the all examined refrigerants, the following ones have the highest exergetic efficiency of all the considered LBWM: R600A, R245FA, R1233ZD(E), R236EA, R1234ZE(Z), R236FA. They belong to both natural refrigerants (hydrocarbons) and single-component hydrofluorocarbons. It should be noted that each of these working media has its drawbacks: some have a high potential for global warming, others are explosive, and others have a high cost.
Styles APA, Harvard, Vancouver, ISO, etc.
33

Wu, Linli, Jun Chen et Shuangfeng Wang. « Experimental study on thermal performance of a pulsating heat pipe using R1233zd(E) as working fluid ». International Communications in Heat and Mass Transfer 135 (juin 2022) : 106152. http://dx.doi.org/10.1016/j.icheatmasstransfer.2022.106152.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
34

Ubara, Tsutomu, Hitoshi Asano et Katsumi Sugimoto. « Falling film evaporation and pool boiling heat transfer of R1233zd(E) on thermal spray coated tube ». Applied Thermal Engineering 196 (septembre 2021) : 117329. http://dx.doi.org/10.1016/j.applthermaleng.2021.117329.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
35

Mahmoudian, Jafar, Andrea Rocchetti, Federico Mazzelli et Adriano Milazzo. « A heat-powered ejector chiller working with low-GWP fluid R1233zd(E) (Part 1 : Experimental results) ». International Journal of Refrigeration 121 (janvier 2021) : 1–9. http://dx.doi.org/10.1016/j.ijrefrig.2020.10.015.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
36

Eyerer, Sebastian, Fabian Dawo, Johannes Kaindl, Christoph Wieland et Hartmut Spliethoff. « Experimental investigation of modern ORC working fluids R1224yd(Z) and R1233zd(E) as replacements for R245fa ». Applied Energy 240 (avril 2019) : 946–63. http://dx.doi.org/10.1016/j.apenergy.2019.02.086.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
37

Xiao, Jiange, et Pega Hrnjak. « Pressure drop of R134a, R32 and R1233zd(E) in diabatic conditions during condensation from superheated vapor ». International Journal of Heat and Mass Transfer 122 (juillet 2018) : 442–50. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.01.123.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
38

Zhang, Ji, Martin Ryhl Kærn, Torben Ommen, Brian Elmegaard et Fredrik Haglind. « Condensation heat transfer and pressure drop characteristics of R134a, R1234ze(E), R245fa and R1233zd(E) in a plate heat exchanger ». International Journal of Heat and Mass Transfer 128 (janvier 2019) : 136–49. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.08.124.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
39

Ko, Ji-Woon, et Dong-Soon Jeon. « Experimental study on film condensation heat transfer characteristics of R134a, R1234ze(E) and R1233zd(E) over condensation tube with enhanced surfaces ». Heat and Mass Transfer 56, no 11 (17 juillet 2020) : 3001–10. http://dx.doi.org/10.1007/s00231-020-02914-w.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
40

Li, Xiaoya, Steven Lecompte, Jera Van Nieuwenhuyse, Kenny Couvreur, Hua Tian, Gequn Shu, Michel De Paepe et Christos N. Markides. « Experimental investigation of an organic Rankine cycle with liquid-flooded expansion and R1233zd(E) as working fluid ». Energy Conversion and Management 234 (avril 2021) : 113894. http://dx.doi.org/10.1016/j.enconman.2021.113894.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
41

Li, Gang. « Thermo-economic evaluation of R1233zd(E) as an R245fa alternative in organic Rankine cycle for geothermal applications ». Korean Journal of Chemical Engineering 38, no 11 (28 septembre 2021) : 2195–207. http://dx.doi.org/10.1007/s11814-021-0936-8.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
42

Welzl, Matthias, Florian Heberle et Dieter Brüggemann. « Experimental evaluation of nucleate pool boiling heat transfer correlations for R245fa and R1233zd(E) in ORC applications ». Renewable Energy 147 (mars 2020) : 2855–64. http://dx.doi.org/10.1016/j.renene.2018.09.093.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
43

Lillo, G., R. Mastrullo, A. W. Mauro et L. Viscito. « Flow boiling of R1233zd(E) in a horizontal tube : Experiments, assessment and correlation for asymmetric annular flow ». International Journal of Heat and Mass Transfer 129 (février 2019) : 547–61. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2018.09.117.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
44

Mwesigye, A., A. Kiamari et S. B. Dworkin. « A thermodynamic investigation and optimization of an ejector refrigeration system using R1233zd(E) as a working fluid ». IOP Conference Series : Materials Science and Engineering 609 (23 octobre 2019) : 052011. http://dx.doi.org/10.1088/1757-899x/609/5/052011.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
45

Nagata, Ryuichi, Chieko Kondou et Shigeru Koyama. « Comparative assessment of condensation and pool boiling heat transfer on horizontal plain single tubes for R1234ze(E), R1234ze(Z), and R1233zd(E) ». International Journal of Refrigeration 63 (mars 2016) : 157–70. http://dx.doi.org/10.1016/j.ijrefrig.2015.11.002.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
46

UBARA, Tsutomu, Katsumi SUGIMOTO et Hitoshi ASANO. « Film thickness and heat transfer characteristics of R1233zd(E) falling film with nucleate boiling on an inclined plate ». International Journal of Heat and Mass Transfer 198 (décembre 2022) : 123423. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2022.123423.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
47

KolobaevViktor, A., Sergey V. Rykov, Irina V. Kudryavtseva, Evgeniy E. Ustyuzhanin, Peter V. Popov, Vladimir A. Rykov et Aleksandr D. Kozlov. « Thermodynamic properties of R1233zd(E) refrigerant : a technique for constructing the fundamental equation of state and tabulated data ». Izmeritel`naya Tekhnika, no 5 (2022) : 22–28. http://dx.doi.org/10.32446/0368-1025it.2022-5-22-28.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
48

KolobaevViktor, A., Sergey V. Rykov, Irina V. Kudryavtseva, Evgeniy E. Ustyuzhanin, Peter V. Popov, Vladimir A. Rykov et Aleksandr D. Kozlov. « Thermodynamic properties of R1233zd(E) refrigerant : a technique for constructing the fundamental equation of state and tabulated data ». Izmeritel`naya Tekhnika, no 5 (2022) : 22–28. http://dx.doi.org/10.32446/0368-1025it.2022-5-22-28.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
49

Fedele, Laura, Mariano Pierantozzi, Giovanni Di Nicola, J. Steven Brown et Sergio Bobbo. « Compressed Liquid Density and Vapor Phase PvT Measurements of trans-1-Chloro-3,3,3-trifluoroprop-1-ene [R1233zd(E)] ». Journal of Chemical & ; Engineering Data 63, no 1 (22 décembre 2017) : 225–32. http://dx.doi.org/10.1021/acs.jced.7b00841.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
50

Welzl, Matthias, Florian Heberle et Dieter Brüggemann. « Simultaneous experimental investigation of nucleate boiling heat transfer and power output in ORC using R245fa and R1233zd(E) ». Energy Procedia 129 (septembre 2017) : 435–42. http://dx.doi.org/10.1016/j.egypro.2017.09.113.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie