Littérature scientifique sur le sujet « Propriétés catalytiques et optiques »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Propriétés catalytiques et optiques ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Propriétés catalytiques et optiques"
Genet, Cyriaque. « Chiralité et optique plasmonique ». Reflets de la physique, no 76 (septembre 2023) : 4–10. http://dx.doi.org/10.1051/refdp/202376004.
Texte intégralLefrant, S., C. Godon, T. Verdon, E. Mulazzi et G. Leising. « Propriétés optiques de polymères et de copolymères orientés ». Journal de Chimie Physique 89 (1992) : 947–56. http://dx.doi.org/10.1051/jcp/1992890947.
Texte intégralCardinal, Thierry, Matthieu Lancry, Lionel Canioni, Bertrand Poumellec et Wilfried Blanc. « Fonctionnaliser le verre pour de nouvelles propriétés optiques ». Reflets de la physique, no 74 (décembre 2022) : 70–75. http://dx.doi.org/10.1051/refdp/202274070.
Texte intégralFortin, ER, et AP Roth. « Quelques propriétés optiques et électro-optiques des super-réseaux et puits quantiques semiconducteurs InGaAs/GaAs ». Journal de Chimie Physique 88 (1991) : 2197–209. http://dx.doi.org/10.1051/jcp/1991882197.
Texte intégralBesbes, Mondher, Jean-Paul Hugonin et Christophe Sauvan. « Calcul électromagnétique de micro et nanostructures photoniques périodiques ». Photoniques, no 100 (janvier 2020) : 34–39. http://dx.doi.org/10.1051/photon/202010034.
Texte intégralLévy-Clément, C., et S. Bastide. « Propriétés optiques du silicium mésoporeux et ses applications potentielles ». Journal de Physique IV (Proceedings) 12, no 2 (avril 2002) : 165–74. http://dx.doi.org/10.1051/jp420020023.
Texte intégralCourjal, Nadège, Florent Behague, Vincent Pêcheur, Mathieu Chauvet, Maria-Pilar Bernal et Jérôme Hauden. « Microsystèmes intégrés en niobate de lithium ». Photoniques, no 98 (septembre 2019) : 34–38. http://dx.doi.org/10.1051/photon/20199834.
Texte intégralRoussel, Frédérick, Ulrich Maschke, Xavier Coqueret et Jean-Marc Buisine. « Propriétés optiques et thermophysiques de composites polyméres-cristaux liquides (PDLC) ». Comptes Rendus de l'Académie des Sciences - Series IIB - Mechanics-Physics-Astronomy 326, no 7 (juillet 1998) : 449–55. http://dx.doi.org/10.1016/s1287-4620(98)80015-x.
Texte intégralPruvost, Laurence, et Thierry Ruchon. « Vortex optiques en interaction avec des atomes ». Reflets de la physique, no 75 (avril 2023) : 10–16. http://dx.doi.org/10.1051/refdp/202375010.
Texte intégralMousseau, Fanny, Chao Yu, Antigoni Alexandrou et Cédric Bouzigues. « L’imagerie optique de nanoparticules luminescentes : de la détection de biomolécules au diagnostic in vitro ». Photoniques, no 106 (janvier 2021) : 30–33. http://dx.doi.org/10.1051/photon/202110630.
Texte intégralThèses sur le sujet "Propriétés catalytiques et optiques"
Komla, Adéchion. « Etude de la texture de couches à propriétés optiques et catalytiques spécifiques obtenues à partir d'aciers inoxydables ». Toulouse 3, 1991. http://www.theses.fr/1991TOU30277.
Texte intégralWakim, Salem. « Elaboration de structures conjuguées chirales à partir de dérivés du trans (1R, 2R)-1,2-diaminocyclohexane. Evaluation des propriétés catalytiques et optiques ». Montpellier 2, 2002. http://www.theses.fr/2002MON20018.
Texte intégralSaitzek, Sébastien. « Systèmes multifonctionnels à base de dioxydes de cérium nanostructurés. Nanocomposites catalytiques CeO2-CuOx et bicouches CeO2-VO2 pour commutation en optoélectronique IR ». Toulon, 2005. http://www.theses.fr/2005TOUL0014.
Texte intégralCerium dioxide is known as presenting a large variety of physico-chemical properties: it can be considered as a multifunctional compound. We present two studies linked to two types of applications in which cerium dioxide is involved as a multifunctional phase: catalytic behaviours of nanocomposite systems CeO2- CuOx for gas sensor applications, optical responses and chemical stability of CeO2-VO2 bilayers for infrared applications. This last study is connected with new technologies like bolometric applications (IR camera). The first study consisted in preparing nanostructured systems CeO2-CuOx from low temperature routes (soft chemistry including sol-gel, low temperature processes). This nanocomposites were characterized from X-ray diffraction, electron microscopy techniques, BET analyses. Infrared spectroscopy associated with homemade equipment was then used to follow catalytic reactions in presence of gas mixtures (air-CH4 or air-CO). A modelling approach is presented to interpret the IR analyses and the catalytic site saturation, observed in the case of ceria based systems. The CuOx –ceria samples were then compacted and inserted in a homemade electronic system to analyse the influence of CO or CH4 reducing gases, on surface conduction of CuOx-CeO2 pellets. The results obtained from FTIR analyses and electronic measurements are found to be coherent: the copper additions decrease the durability of catalytic responses of these nanocomposite systems, however they increase the sensibility in the case of low Cu additions. This might be interesting for gas sensor applications. The second study deals with CeO2-VO2 bilayers obtained from sputtering techniques and deposited in Si and SiO2 substrates. RF sputtering parameters were optimised to deposit first VO2 then CeO2 thin layers. The role of CeO2 was to insure a protection of the VO2 layer from aggressive environments, without degrading optical responses. Starting from a low cost target of V2O5 , layers of VO2 were obtained. We show that these bilayers present a good thermochromic optical contrast (insulating-metal transition at 68°C). Ceria is known as being transparent for IR wavelengths and opaque for UV radiation. However, the emissivity depends on ceria layer thickness. These new bilayers present a double interest: they can present increased chemical stability (improvement of lifetimes), and they can be used to modulate infrared emissivity responses in the case of IR detection
Diaw, Abdou Karim Diagne. « Electrosynthèse, caractérisation et propriétés optique du Poly-N-phénylpyrrole dans divers milieux et sur divers substrats : étude de l'effet catalytique du pyrrole et de l'effet d'inhibition de corrosion : synthèse organique, électropolymérisation en milieu organique, caractérisation et propriétés optiques des dérivés p-substitués du poly(N-PhPy) ». Paris 7, 2010. http://www.theses.fr/2010PA077014.
Texte intégralTwo strategies are proposed to improve the organic polymer solubility for their use as active components in electronic devices: in the first one N-phenylpyrrole (N-PhPy) is electropolymerized in micellar solution, which increases solubility of resulting polymers; in the second one an electron-donating substituent is grafted in the para position of phenyl in N-PhPy moiety by chemical synthesis, followed by an electropolymerization process. A direct micellar medium (SDS + water + perchloric acid) and an inverse micellar medium (AOT + alcane (octane) + perchloric acid) are used to electrosynthesize poly(N-PhPy) films on Pt. These films present a good solubility, which also allowed us to characterize their structure by MALDI-TOF mass spectrometry, and to study their optic properties in organic solution. We were able to synthetize with satisfactory yields (36-81 %), by the Clauson-Kaas modified method and the Still method and to characterize a new series of N-PhPy para-substituted derivatives and new symmetrical and asymmetrical mono and oligophenylenethiophene compounds with one (or 2) pyrrole(s) at the chain end (ThPhPy and PyPhThThPhPy). We electrosynthesized in organic medium, very electroactive and adherent poly(MPhPy), poly(HPhPy), poly(ThPhPy), poly(PhDPy) and poly (DPhDPy) films on Pt. FT-IR spectroscopy showed the existence of a coupling in the a - a' positions of pyrrolic rings, having pendant phenyl groups with an electron-donating substituent in para. We compared the optic properties of these N-PhPy derivatives and of corresponding soluble polymers [poly(MPhPy), poly(HPhPy), poly(ThPhPy)] in organic solution and measured the fluorescence quantum yields and decays
Lee, Suyeon. « Synthesis and properties of mono and bi- metallic nanoparticles of noble metals ; towards fabrication of novel functional nanoparticles assemblies ». Electronic Thesis or Diss., Sorbonne université, 2021. http://www.theses.fr/2021SORUS580.
Texte intégralNoble metal nanoparticles (NPs) have attracted a great interest last years in various domains due to their distinct physical and chemical properties such as optical, catalytic or magnetic properties. In this thesis, we investigated the various approaches to integrate two metals in the same system, such as bimetallic nanoparticles, or binary superlattices to obtain new properties. We have developed seed-mediated growth method to rationally synthesis core-shell NPs Au(or Ag)@M (M=Ag, Pd, Pt). The impact of synthesis parameters such as concentration of metallic precursors, nature of ligands or temperature on key NPs parameters (core size, shell thickness, dispersity) was studied. The optical, vibrational and catalytic properties of different bimetallic NPs were characterized according to their structure, chemical composition, number of shell atomic layer and core crystallinities. In addition, binary NP superlattices, which are co-assembled from of two different complementary components were also reported. Several assembly conditions (effective size ratio, concentration ratio, deposition temperature, deposition method) were explored. The physical mechanism responsible for the observed structural variation was thus identified. A variety of crystalline structures for the binary superlattices such as AlB2, NaZn13, NaCl were produced. Finally, the magnetic properties of Fe2O3/Au NP binary superlattices were studied. They are determined by the interparticle distance of Fe2O3 NPs modulated by the insertion of Au NPs
El, Moll Hani. « Synthèses et propriétés catalytiques de cavitands résorcinaréniques ». Strasbourg, 2009. http://www.theses.fr/2009STRA6118.
Texte intégralPoriel, Cyril. « Les spirobifluorènylprophyrines : synthèse, électropolymérisation et propriétés catalytiques ». Rennes 1, 2003. http://www.theses.fr/2003REN10102.
Texte intégralAbu, Bakar Noor Hana Hanif. « Particules bimétalliques. Synthèse, caractérisation et propriétés catalytiques ». Thesis, Nancy 1, 2010. http://www.theses.fr/2010NAN10013/document.
Texte intégralThe synthesis of PtNi bimetallic particles supported silica catalysts, prepared via non-classical methods using sodium borohydride (NaBH4) as a reducing agent, was studied in detail. The silica supports employed in this work is limited to crystalline silica and mesoporous aluminosilicate (MCM-41). Various preparation techniques as well as reduction parameters were investigated to gain an insight on how these factors influenced the final structure of the PtNi particles on the silica support and their catalytic reactivity towards the hydrogenation of benzene to cyclohexane. It was found that this reduction method enabled total reduction of the metal salts during the preparation stage of the catalysts. Hydrogen consumptions which were detected using H2-TPR analysis were mainly attributed to surface oxidation of the metal phase during storage. Studies on the effect of preparation techniques showed that the surface and catalytic properties of the catalysts are largely affected by the PtNi ratio as well as the method in which the metal salts are introduced onto the support. Catalysts prepared via co-impregnation technique generally exhibited better catalytic reactivity when compared to those prepared via co-precipitation and step-impregnation techniques. Further, catalysts with higher Ni content showed a tendency towards lower reactivity in contrast to those with high Pt content. Several catalysts demonstrated enhanced reactivity when compared to the monometallic Pt catalysts. Investigations showed that the improved reactivity can be attributed to alloying of the Pt and Ni accompanied by surface segregation of Pt. As a means to improve catalytic reactivity, PtNi stabilized oleic acid particles were synthesized prior to incorporation onto a silica support. The intention of this study is to allow better control of the dispersion and alloying between the PtNi particles. Results show that though better dispersed alloys were obtained, very low activity was observed. Nickel surface segregation is likely to be the cause of this due to the presence of oxygen from oleic acid. The effect of several reduction parameters was also investigated to enhance catalytic reactivity. The reduction temperature, NaBH4 concentration and medium in which reduction was carried out were varied. Variations in these parameters affected the particle morphology and dispersion of the PtNi particles. Optimum catalytic reactivity was obtained when small dispersed PtNi particles were formed at 273 K using 0.3 M NaBH4 in a medium of ethanol. Classical methods were also used for the synthesis of PtNi supported catalysts. In this study the PtNi particles were formed using H2 gas as the reducing agent. Several catalysts showed improved reactivity. Investigations show that this is attributed to the anchoring effect of Ni2+ ions which anchors Pt to the support, forming fine dispersed Pt particles available for catalytic reaction. In general, it is obvious that alloyed and non – alloyed bimetallic particles supported on silica can lead to the enhancement of hydrogenation reactions when compared to the respective monometallic catalysts. However, the PtNi ratios, preparation techniques, environment in which the particles are reduced and support influences the structure of the metallic phase of these catalysts. Therefore it is imperative to gain a thorough understanding on these parameters, in order to synthesize catalysts with desired properties
Ramos, Paul. « La lipase pancréatique humaine : Purification, propriétés catalytiques et propriétés de fluorescence ». Université Louis Pasteur (Strasbourg) (1971-2008), 2002. http://www.theses.fr/2002STR13207.
Texte intégralThis work of thesis is articulated around two parts. The first part describes the purification of human pancreatic lipase and the study of its catalytic properties. In a second part, more fundamental, the properties of fluorescence of human pancreatic lipase were studied. Lipase was purified starting from two origins: human pancreatic juice and recombinant human pancreatic lipase. The catalytic properties of the two purified enzymes were studied in titrimetry at constant pH. They were found identical to those of the enzyme present in the plasma of patients suffering from acute pancreatitis. Moreover, the stability of the two preparations of purified enzyme proved to be excellent. In addition, the two preparations are commutable with the specimens coming from patients. They were certified by five laboratories (ours having coordinated the study) from four different countries. These results and the batches of these two materials were transmitted to the Bureau Communautaire de Référence (Brussels) for recording. These two materials will improve the comparability of results of measurements of the enzymatic activity of lipase in fundamental and clinical enzymology studies. In the second part we carried out the studies in fluorescence of wild pancreatic lipase and various mutants where a tryptophan was replaced by a phenylalanine. Wild pancreatic lipase has three distinct lifetimes. Only the change of tryptophan 30 involved the disappearance of the longest lifetime thus characterizing the contribution of this tryptophan in the total fluorescence of protein. Tryptophan 30 is very close to the lid covering the catalytic site with lipase in closed conformation (non active). We can attribute the long lifetime to tryptophan 30, which gives a convenient tool to follow with fluorescence the structural and likely functional variations of this important part of the protein during its activation by biliary salts and colipase. The study of the fluorescence of lipase in the presence of colipase and/or biliary salts by following the long lifetime of protein showed significant differences compared to the characteristics of fluorescence of F30 lipase without any effector (closed conformation). This tool should allow to easily identify inactive and active conformation thanks to measurement of the long lifetime of human pancreatic lipase
Pinna, Nicola. « Nanomatériaux : étude structurale et propriétés optiques ». Paris 6, 2001. http://www.theses.fr/2001PA066357.
Texte intégralLivres sur le sujet "Propriétés catalytiques et optiques"
Collet, André. Molécules chirales : Stéréochimie et propriétés. Les Ulis : EDP Sciences, 2006.
Trouver le texte intégralCollet, André. Molécules chirales : Stéréochimie et propriétés. Les Ulis : EDP Science, 2006.
Trouver le texte intégral1945-, Grubb David T., dir. Polymer microscopy. 2e éd. London : Chapman and Hall, 1996.
Trouver le texte intégralSawyer, Linda C. Polymer microscopy. London : Chapman and Hall, 1987.
Trouver le texte intégralSawyer, Linda C. Polymer microscopy. 3e éd. New York : Springer, 2008.
Trouver le texte intégralKokuritsu Bunkazai Kikō (Japan). Tōkyō Bunkazai Kenkyūjo. Kokuhō jitsugetsu shiki sansuizu kōgaku chōsa hōkokusho : Shingonshū Omuro-ha Daihonzan Amanosan Kongōji shozō. Tōkyō-to Taitō-ku : Kokuritsu Bunkazai Kikō Tōkyō Bunkazai Kenkyūjo, 2019.
Trouver le texte intégralDutasta, Jean-Pierre, Laure Guy, André Collet et Jeanne Crassous. Molécules Chirales : Stéréochimie et Propriétés. EDP Sciences, 2021.
Trouver le texte intégralLévy, A. Michel. Tableaux des Minéraux des Roches : Résumé de Leurs Propriétés Optiques, Cristallographiques Et Chimiques (Classic Reprint) (French Edition). Forgotten Books, 2018.
Trouver le texte intégralCloizeaux, Alfred Des. Nouvelles Recherches Sur les Propriétés Optiques des Cristaux Naturels Ou Artificiels, et Sur les Variations Que Ces Propriétés Éprouvent Sous l'influence de la Chaleur. Creative Media Partners, LLC, 2018.
Trouver le texte intégralCloizeaux, Alfred Des. Nouvelles Recherches Sur les Propriétés Optiques des Cristaux Naturels Ou Artificiels, et Sur les Variations Que Ces Propriétés Éprouvent Sous l'influence de la Chaleur. Creative Media Partners, LLC, 2018.
Trouver le texte intégralChapitres de livres sur le sujet "Propriétés catalytiques et optiques"
Boucher, Olivier. « Propriétés physiques, chimiques et optiques des aérosols ». Dans Ingénierie et développement durable, 17–35. Paris : Springer Paris, 2012. http://dx.doi.org/10.1007/978-2-8178-0055-4_3.
Texte intégral« 3 Propriétés optiques ». Dans Les surfaces solides : concepts et méthodes, 131–48. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0293-7-009.
Texte intégral« 3 Propriétés optiques ». Dans Les surfaces solides : concepts et méthodes, 131–48. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0293-7.c009.
Texte intégral« Chapitre 19 Effets électro-optiques et élasto-optiques ». Dans Symétrie et propriétés physiques des cristaux, 385–412. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0927-1-027.
Texte intégral« Chapitre 19 Effets électro-optiques et élasto-optiques ». Dans Symétrie et propriétés physiques des cristaux, 385–412. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0927-1.c027.
Texte intégralEtienne, Serge, et Laurent David. « Chapitre 7. Propriétés électriques et optiques ». Dans Introduction à la physique des polymères, 221–62. Dunod, 2012. http://dx.doi.org/10.3917/dunod.etien.2012.01.0221.
Texte intégral« 6 Étude expérimentale des propriétés optiques de surface ». Dans Les surfaces solides : concepts et méthodes, 239–48. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0293-7-017.
Texte intégral« 6 Étude expérimentale des propriétés optiques de surface ». Dans Les surfaces solides : concepts et méthodes, 239–48. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-0293-7.c017.
Texte intégral« Propriétés des résonateurs optiques et des faisceaux gaussiens ». Dans Optique de Fourier, 409–20. Paris : Springer Paris, 2009. http://dx.doi.org/10.1007/978-2-287-99168-4_15.
Texte intégralPlanel, R. « Propriétés optiques des semi-conducteurs et de leurs hétérostructures ». Dans L'optique non linéaire et ses matériaux, 1–72. EDP Sciences, 2001. http://dx.doi.org/10.1051/978-2-7598-0194-7.c002.
Texte intégralActes de conférences sur le sujet "Propriétés catalytiques et optiques"
Mangin, Jacques. « Métrologie des propriétés optiques de matériaux massifs : absorption résiduelle, coefficients thermo-optiques, piézo-électriques et électro-optiques ». Dans Élaboration et caractérisation des cristaux massifs et en couches minces pour l'optique. Les Ulis, France : EDP Sciences, 2003. http://dx.doi.org/10.1051/bib-sfo:2002811.
Texte intégralPlanel, R. « Propriétés optiques des semi-conducteurs et de leurs hétérostructures ». Dans L'optique non linéaire et ses matériaux. Les Ulis, France : EDP Sciences, 1998. http://dx.doi.org/10.1051/sfo/1998009.
Texte intégralBoulanger, Benoît, et Jean-Philippe Fève. « Méthodes de caractérisation des propriétés optiques non linéaires de conversion de fréquence des cristaux ». Dans Élaboration et caractérisation des cristaux massifs et en couches minces pour l'optique. Les Ulis, France : EDP Sciences, 2003. http://dx.doi.org/10.1051/bib-sfo:2002816.
Texte intégralPocholle, J. P. « Propriétés optiques des matériaux semiconducteurs à puits quantiques et applications dans le domaine du traitement du signal ». Dans Optoélectronique (Volume 1). Les Ulis, France : EDP Sciences, 1990. http://dx.doi.org/10.1051/sfo/1990006.
Texte intégral