Se connecter

Bibliographies thématiques / Processi CAD / Articles de revues

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Processi CAD.

Articles de revues sur le sujet « Processi CAD »

Auteur : Grafiati

Publié le 10 mars 2023

Mis à jour le 11 mars 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Processi CAD ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

HIRAI, Shunsuke, et Yoshihiro TERAMURA. « 3211 Modeling approach for the design process with 3D CAD ». Proceedings of Design & ; Systems Conference 2007.17 (2007) : 319–22. http://dx.doi.org/10.1299/jsmedsd.2007.17.319.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Inagaki, Atsuko, Yoshitaka Takano, Yasuyuki Kubo, Kazuyuki Mise et Iwao Furusawa. « Construction of an equalized cDNA library fromColletotrichum lagenariumand its application to the isolation of differentially expressed genes ». Canadian Journal of Microbiology 46, n^o 2 (1 février 2000) : 150–58. http://dx.doi.org/10.1139/w99-119.

Texte intégral

Résumé :

To establish an efficient screening system for differentially expressed genes of a phytopathogenic fungus Colletotrichum lagenarium, we constructed an equalized (normalized) cDNA library from C. lagenarium and used this library for differential screening. For the isolation of genes involved in infection-related developments of conidia, conidia undergoing appressorium differentiation were selected as the source of materials for construction of the cDNA library. The equalization of cDNA was performed twice using a kinetic method, and the products were cloned into a plasmid vector. Colony hybridization with nine probes of different abundance showed a reduction in abundance variation from at least 276-fold in the original library to 10-fold in the equalized cDNA library, which demonstrated that the cDNA was successfully equalized. By differential hybridization of 1900 cDNA clones in the equalized cDNA library and RNA blot analysis of candidate clones, we identified 11 independent cDNA clones, designated CAD1 through CAD11, that were expressed in appressorium-differentiating conidia, but not in vegetative mycelia. The transcripts of CAD1 and CAD2 hardly accumulated in preincubated conidia, whereas those of CAD3 and CAD4 accumulated highly and slightly, respectively. The amount of the four CAD transcripts increased at the early stage of the appressorium formation process. Sequence analysis of CAD1 revealed that CAD1 would encode for 101 amino acid polypeptides, which showed homology to metallothioneins. Deduced amino acid sequence of CAD2 would encode 278 amino acid polypeptides, and showed high homology to genes in aflatoxin, and sterigmatocystin gene clusters of Aspergillus parasiticus and A. nidulans, respectively. Key words: equalized cDNA library, differential screening, Colletotrichum lagenarium, appressorium formation, CAD genes.

Styles APA, Harvard, Vancouver, ISO, etc.

3

Dziubek, Tomasz, et Mateusz Pelc. « Application of CAD/CAE/RP in the modeling process and manufacture of a functional model of a turbocharger ». Mechanik, n^o 12 (décembre 2015) : 973/062–973/069. http://dx.doi.org/10.17814/mechanik.2015.12.558.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

ISHIGURO, Eiki, Tohru ISHIDA, Masahiko KITA, Keiichi NAKAMOTO et Yoshimi TAKEUCHI. « A11 Development of CAD/CAM System for Cross Section's Changing Hole Electrical Discharge Machining : Formulation of Post Processor(Digital design and digital manufacturing (CAD/CAM)) ». Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21 2009.5 (2009) : 251–56. http://dx.doi.org/10.1299/jsmelem.2009.5.251.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Kacalak, Wojciech, Zbigniew Budniak et Filip Szafraniec. « Analysis of shaping of the screw surface in the process a of grinding by the grinding wheels using CAD/CAE ». Mechanik, n^o 10 (octobre 2016) : 1368–69. http://dx.doi.org/10.17814/mechanik.2016.10.365.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Braak, Heiko, et Kelly Del Tredici. « From the Entorhinal Region via the Prosubiculum to the Dentate Fascia : Alzheimer Disease-Related Neurofibrillary Changes in the Temporal Allocortex ». Journal of Neuropathology & ; Experimental Neurology 79, n^o 2 (8 janvier 2020) : 163–75. http://dx.doi.org/10.1093/jnen/nlz123.

Texte intégral

Résumé :

Abstract The pathological process underlying Alzheimer disease (AD) unfolds predominantly in the cerebral cortex with the gradual appearance and regional progression of abnormal tau. Intraneuronal tau pathology progresses from the temporal transentorhinal and entorhinal regions into neocortical fields/areas of the temporal allocortex. Here, based on 95 cases staged for AD-related neurofibrillary changes, we propose an ordered progression of abnormal tau in the temporal allocortex. Initially, abnormal tau was limited to distal dendritic segments followed by tau in cell bodies of projection neurons of the transentorhinal/entorhinal layer pre-α. Next, abnormal distal dendrites accumulated in the prosubiculum and extended into the CA1 stratum oriens and lacunosum. Subsequently, altered dendrites developed in the CA2/CA3 stratum oriens and stratum lacunosum-moleculare, combined with tau-positive thorny excrescences of CA3/CA4 mossy cells. Finally, granule cells of the dentate fascia became involved. Such a progression might recapitulate a sequence of transsynaptic spreading of abnormal tau from 1 projection neuron to the next: From pre-α cells to distal dendrites in the prosubiculum and CA1; then, from CA1 or prosubicular pyramids to CA2 principal cells and CA3/CA4 mossy cells; finally, from CA4 mossy cells to dentate granule cells. The lesions are additive: Those from the previous steps persist.

Styles APA, Harvard, Vancouver, ISO, etc.

7

Kabbaj, A., E. Cerny et M. Dagenais. « CBS-CAD : a CAD process management system ». Microelectronics Journal 24, n^o 3 (mai 1993) : 229–52. http://dx.doi.org/10.1016/0026-2692(93)90155-8.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

MORI, Toshihiko, et Suyang Li. « Process Design by Fusion of Process Simulation and Artificial Intelligent ». Proceedings of The Manufacturing & ; Machine Tool Conference 2004.5 (2004) : 301–2. http://dx.doi.org/10.1299/jsmemmt.2004.5.301.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

OKUDA, Yoko, Keiichi SHIRASE, Kouhei FUKADA, Keiichi NAKAMOTO et Eiji ARAI. « 306 Development of Computer-aided Flexible Process Planning System ». Proceedings of The Manufacturing & ; Machine Tool Conference 2006.6 (2006) : 43–44. http://dx.doi.org/10.1299/jsmemmt.2006.6.43.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

KOUNO, Tomoyuki, Tomo KOYAMA, Tatsuhiko SAKAGUCHI, Keiichi NAKAMOTO et Keiichi SHIRASE. « 307 Research on Voxel Model Applying for Machining Process Simulation ». Proceedings of The Manufacturing & ; Machine Tool Conference 2006.6 (2006) : 45–46. http://dx.doi.org/10.1299/jsmemmt.2006.6.45.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

11

Madden, James. « CAD in process plant engineering ». Computer-Aided Engineering Journal 4, n^o 6 (1987) : 237. http://dx.doi.org/10.1049/cae.1987.0059.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

12

Bulavin, V. F., T. G. Bulavina, D. V. Koshutin et I. S. Petryashov. « CAO / CAE-Engineering Support for the Production of Small Enterprises ». Proceedings of Higher Educational Institutions. Маchine Building, n^o 8 (749) (août 2022) : 47–54. http://dx.doi.org/10.18698/0536-1044-2022-8-47-54.

Texte intégral

Résumé :

The creation of high-tech and science based productions allows designing products with high consumer qualities and manufacturing globally competitive products. New trends associated with the digitalization of design and technological projects are accelerating the integration of material and virtual production. A dynamic environment requires the flexibility of management in the face of accelerated adaptation of manufacture. Such challenges involve long-term forecasting and making quick decisions while maintaining the competitiveness of goods and services over time. The technological transformation of small and medium-sized enterprises as part of the transition to digital production determines their integration into the space of distributed factories. Innovative changes in manufacturing technology are accompanied by the introduction of efficient business processes at all levels. The article considers the formation of a group of competencies ensuring the integration of CAD / CAE / CAO into a single information data flow, as well as their distribution in the field of small and medium-sized machine-building enterprises. A single system of intelligent business process model provides support for parallel work of developers.

Styles APA, Harvard, Vancouver, ISO, etc.

13

Wang, Huashe, Xuexia Zhang, Yi Li, Yanan Li et Ting Pang. « Lidocaine hampers colorectal cancer process via circITFG2/miR-1204/SOCS2 axis ». Anti-Cancer Drugs 33, n^o 3 (17 janvier 2022) : 235–44. http://dx.doi.org/10.1097/cad.0000000000001091.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

14

FUKUTA, Yuka, et Toshiyasu KINARI. « Development of CAD / CAM System for Traditional Craft "Drawing / Pattern Carving Shibori" Process ». Journal of Textile Engineering 61, n^o 6 (2015) : 75–83. http://dx.doi.org/10.4188/jte.61.75.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

15

Altunin, K. A., et M. V. Sokolov. « Development of Information Support for Intelligent CAD of Cutting Processes ». Advanced Materials & ; Technologies, n^o 2 (2017) : 067–77. http://dx.doi.org/10.17277/amt.2017.02.pp.067-077.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

16

Fu, Zhenrui, Chao Lu, Changwen Zhang et Baomin Qiao. « PSMA5 promotes the tumorigenic process of prostate cancer and is related to bortezomib resistance ». Anti-Cancer Drugs 30, n^o 7 (août 2019) : 722–30. http://dx.doi.org/10.1097/cad.0000000000000773.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

17

SATO, RYUZO. « CAD-CAM for Apparel Production Process ». Sen'i Gakkaishi 41, n^o 1 (1985) : P32—P38. http://dx.doi.org/10.2115/fiber.41.p32.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

18

Amaral, W. C., L. V. R. Arruda, S. S. Bueno, A. S. Barbara, M. A. Silva, H. J. Almeida et M. C. Castanho. « CAD package for industrial process identification ». Journal of Process Control 2, n^o 3 (janvier 1992) : 155–61. http://dx.doi.org/10.1016/0959-1524(92)85005-h.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

19

Sugimura, Nobuhiro, et Jotaro Inoue. « 202 A study on process planning system considering production schedules ». Proceedings of The Manufacturing & ; Machine Tool Conference 2001.3 (2001) : 39–40. http://dx.doi.org/10.1299/jsmemmt.2001.3.39.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

20

Agaev, E. T. « IMPROVING THE QUALITY OF WORKING ALGORITHMS OF CONTROL PROGRAMS OF CNC MACHINES BASED ON A COMPARATIVE ANALYSIS OF MODERN CNC AND CAD/CAM PROGRAMS ». Quality. Innovation. Education, n^o 5 (2022) : 96–101. http://dx.doi.org/10.31145/1999-513x-2022-5-96-101.

Texte intégral

Résumé :

This article discusses the possibility of using modern CNC and CAD / CAM software, to create algorithms for automating the writing of NC for CNC machines, using the example of Sinutrain and Solidworks programs, and also highlights the main quality problems that complicate the process of automating the creation of NC.

Styles APA, Harvard, Vancouver, ISO, etc.

21

Cassotti, Mathieu, Marine Agogué, Anaëlle Camarda, Olivier Houdé et Grégoire Borst. « Inhibitory Control as a Core Process of Creative Problem Solving and Idea Generation from Childhood to Adulthood ». New Directions for Child and Adolescent Development 2016, n^o 151 (mars 2016) : 61–72. http://dx.doi.org/10.1002/cad.20153.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

22

Zhang, Zhijian, Yanping Mo, Lixuan Wu, Xiaolong Wang, Guansheng Liao, Wenzhi Tan et Dexiang Li. « Circ_0002111 modulates the growth process of papillary thyroid carcinoma cells by targeting the miR-363-3p/HMGB1 axis ». Anti-Cancer Drugs 33, n^o 9 (14 septembre 2022) : 923–34. http://dx.doi.org/10.1097/cad.0000000000001382.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

23

Bernardini, Federico, Martina Gelfusa, Mihail Celeski, Federica Coletti, Annunziata Nusca, Domenico De Stefano, Francesco Piccirillo et al. « Beyond the Calcium Score : What Additional Information from a CT Scan Can Assist in Cardiovascular Risk Assessment ? » Applied Sciences 13, n^o 1 (25 décembre 2022) : 241. http://dx.doi.org/10.3390/app13010241.

Texte intégral

Résumé :

Coronary artery disease (CAD) still represents a leading cause of mortality worldwide. Early identification of patients at the highest risk of CAD is crucial to prevent acute adverse events and reduce morbidity and mortality. The coronary artery calcium (CAC) score is a reliable cardiovascular (CV) risk index with an independent prognostic value. Guidelines recommend using it as a risk enhancer in individuals with low or moderate CV risk. However, other computed tomography (CT) measurable parameters have recently been proposed as CV risk markers. Increasing evidence demonstrates the association between epicardial fat volume and coronary atherosclerosis in chronic and acute coronary syndromes. Furthermore, other parameters obtainable from CT, such as aortic stiffness, liver fat, aortic calcium, and myocardial scarring, are under investigation. This review aims to describe all CT potential in atherosclerosis detection and cardiovascular risk assessment beyond the CAC, trying to understand how to integrate CT parameters with traditional risk factors and to improve clinicians' ability to detect CAD early, allowing appropriate therapies promptly.

Styles APA, Harvard, Vancouver, ISO, etc.

24

NARITA, Hirohisa, Keiichi SHIRASE, Hidefumi WAKAMATU, Akira TSUMAYA et Eiji ARAI. « 203 Trial of an autonomous milling operation based on in-process tool path generation ». Proceedings of The Manufacturing & ; Machine Tool Conference 2001.3 (2001) : 41–42. http://dx.doi.org/10.1299/jsmemmt.2001.3.41.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

25

Silva, Nelson R. F. A., Lukasz Witek, Paulo G. Coelho, Van P. Thompson, Elizabeth D. Rekow et Jim Smay. « Additive CAD/CAM Process for Dental Prostheses ». Journal of Prosthodontics 20, n^o 2 (février 2011) : 93–96. http://dx.doi.org/10.1111/j.1532-849x.2010.00623.x.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

26

Manoharan, Thivakar, Marcin Humpa, Alexander Martha et Peter Koehler. « Knowledge integration in CAD-CAM process chain ». Computer-Aided Design and Applications 13, n^o 5 (22 février 2016) : 729–36. http://dx.doi.org/10.1080/16864360.2016.1150720.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

27

Hadj, Riadh Ben, Imen Belhadj, Chiheb Gouta, Moez Trigui, Nizar Aifaoui et Moncef Hammadi. « An interoperability process between CAD system and CAE applications based on CAD data ». International Journal on Interactive Design and Manufacturing (IJIDeM) 12, n^o 3 (16 décembre 2017) : 1039–58. http://dx.doi.org/10.1007/s12008-017-0445-5.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

28

Zaborski, Andrzej. « Manufacturing preparation using CAD and CAD/CAM software ». Mechanik 91, n^o 7 (9 juillet 2018) : 567–69. http://dx.doi.org/10.17814/mechanik.2018.7.86.

Texte intégral

Résumé :

A possibility of using contemporary CAD and CAD/CAM systems for computer-integrated developing the processes of preparation products manufacturing is presented. On the example of the modernization of the lock lever of the head of the sewing machine in article discussed design process and production preparation using numerically controlled machines.

Styles APA, Harvard, Vancouver, ISO, etc.

29

Covington, Elizabeth D., Minnie M. Wu et Richard S. Lewis. « Essential Role for the CRAC Activation Domain in Store-dependent Oligomerization of STIM1 ». Molecular Biology of the Cell 21, n^o 11 (juin 2010) : 1897–907. http://dx.doi.org/10.1091/mbc.e10-02-0145.

Texte intégral

Résumé :

Oligomerization of the ER Ca2+ sensor STIM1 is an essential step in store-operated Ca2+ entry. The lumenal EF-hand and SAM domains of STIM1 are believed to initiate oligomerization after Ca2+ store depletion, but the contributions of STIM1 cytosolic domains (coiled-coil 1, CC1; coiled-coil 2, CC2; CRAC activation domain, CAD) to this process are not well understood. By applying coimmunoprecipitation and fluorescence photobleaching and energy transfer techniques to truncated and mutant STIM1 proteins, we find that STIM1 cytosolic domains play distinct roles in forming both “resting” oligomers in cells with replete Ca2+ stores and higher-order oligomers in store-depleted cells. CC1 supports the formation of resting STIM1 oligomers and appears to interact with cytosolic components to slow STIM1 diffusion. On store depletion, STIM1 lacking all cytosolic domains (STIM1-ΔC) oligomerizes through EF-SAM interactions alone, but these oligomers are unstable. Addition of CC1 + CAD, but not CC1 alone, enables the formation of stable store-dependent oligomers. Within the CAD, both CC2 and C-terminal residues contribute to oligomer formation. Our results reveal a new function for the CAD: in addition to binding and activating Orai1, it is directly involved in STIM1 oligomerization, the initial event triggering store-operated Ca2+ entry.

Styles APA, Harvard, Vancouver, ISO, etc.

30

Choi, Kyoungme, et Jongjun Kim. « A Study on Tricot Textile Design Process using Tricot CAD Program ». Fashion business 19, n^o 5 (30 novembre 2015) : 1–16. http://dx.doi.org/10.12940/jfb.2015.19.5.1.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

31

SASAHARA, Hiroyuki, Yoshihisa NAITO et Masaomi TSUTSUMI. « Study on Prediction and Avoidance of Chatter in Milling Process with CAD/CAE and Impulse Sound ». Journal of the Japan Society for Precision Engineering, Contributed Papers 72, n^o 4 (2006) : 534–38. http://dx.doi.org/10.2493/jspe.72.534.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

32

WATANABE, Jun. « G1201-1-2 Efficient Vehicle Development process using "Know How CAD system" ». Proceedings of the JSME annual meeting 2009.4 (2009) : 195–96. http://dx.doi.org/10.1299/jsmemecjo.2009.4.0_195.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

33

Semeno, Valeriy A. « EXPERIENCE OF USING CAD IN THE EDUCATIONAL PROCESS ». Bulletin USPTU. Science, education, economy. Series economy, n^o 1 (avril 2019) : 130. http://dx.doi.org/10.17122/2541-8904-2019-1-27-130-136.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

34

Thomas, Kurian K., et Gary W. Fischer. « Integrating CAD/CAM software for process planning applications ». Journal of Materials Processing Technology 61, n^o 1-2 (août 1996) : 87–92. http://dx.doi.org/10.1016/0924-0136(96)02470-3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

35

Hamade, R. F., H. A. Artail et M. Y. Jaber. « Evaluating the learning process of mechanical CAD students ». Computers & ; Education 49, n^o 3 (novembre 2007) : 640–61. http://dx.doi.org/10.1016/j.compedu.2005.11.009.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

36

Feijo, Bruno, Paulo C. Rodacki Gomes, Joao Bento et Sergio Scheer. « CAD for process innovation in the construction industry ». Structural Engineering and Mechanics 4, n^o 6 (25 novembre 1996) : 717–29. http://dx.doi.org/10.12989/sem.1996.4.6.717.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

37

TEHRANI, Hossein, Nobuhiro SUGIMURA, Koji IWAMURA et Yoshitaka TANIMIZU. « C30 Agent based integrated system for process planning and scheduling for FMS ». Proceedings of The Manufacturing & ; Machine Tool Conference 2008.7 (2008) : 265–66. http://dx.doi.org/10.1299/jsmemmt.2008.7.265.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

38

Wakita, Sho, Keiichi Shirase, Takashi Senda, Hitoshi Tamamura et Hirokazu Suzuki. « B17 Scheduling of Flow Shop Type Production for Wide Variety of Products Considering Process Capability ». Proceedings of The Manufacturing & ; Machine Tool Conference 2010.8 (2010) : 107–8. http://dx.doi.org/10.1299/jsmemmt.2010.8.107.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

39

Pisula, Jadwiga, et Bartłomiej Sobolewski. « Comparative analysis of methods of creating smooth tooth profile in selected CAD systems ». Mechanik, n^o 12 (décembre 2015) : 975/160–975/164. http://dx.doi.org/10.17814/mechanik.2015.12.579.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

40

Pathak, Nimai, Bhagyalaxmi Chundawat, Pratik Das, Pampa Modak et Brindaban Modak. « Unraveling the site-specific energy transfer driven tunable emission characteristics of Eu3+ & ; Tb3+ co-doped Ca10(PO4)6F2 phosphors ». RSC Advances 11, n^o 50 (2021) : 31421–32. http://dx.doi.org/10.1039/d1ra04941k.

Texte intégral

Résumé :

Various site specific energy transfer (ET) process such as Tb3+@Ca2 → Eu3+@Ca1, Tb3+@Ca1 → Eu3+@Ca2 and Tb3+@Ca1 → Eu3+@Ca1 were explored in Eu3+ and Tb3+ co-doped Ca10(PO4)6F2 phosphor, which are responsible for tunable colour characteristics.

Styles APA, Harvard, Vancouver, ISO, etc.

41

SUGIMURA, Nobuhiro, Shrestha Rajesh et Toshihiro TAKEMOTO. « A Study on Integrated Process Planning and Scheduling System for Holonic Manufacturing Systems ». Proceedings of The Manufacturing & ; Machine Tool Conference 2004.5 (2004) : 307–8. http://dx.doi.org/10.1299/jsmemmt.2004.5.307.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

42

Deschênes, Jean-Sébastien, et André Pomerleau. « Process control through a case study : A mixing process. I. SISO case ». Computer Applications in Engineering Education 13, n^o 4 (2005) : 324–32. http://dx.doi.org/10.1002/cae.20058.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

43

Okesina, A. A., M. S. Ajao, M. O. Buhari, A. M. Afodun, K. B. Okesina, R. Y. Usman, F. A. Sulaimon et B. P. Kolawole. « Activation of pro-apoptotic cells, reactive astrogliosis and hyperphosphorylation of tau protein in trimethyltin-induced hippocampal injury in rats ». Anatomy Journal of Africa 9, n^o 2 (21 août 2020) : 1782–88. http://dx.doi.org/10.4314/aja.v9i2.198924.

Texte intégral

Résumé :

Neurodegenerative diseases cause neural cells to lose both the functional and sensory abilities as a result of genetic factors, proteopathies and mitochondrial dysfunction. Neurodegeneration forms the basis of most neurodegenerative disorders for example Alzheimer’s disease, Huntington’s diseases, and Parkinson’s diseases. The mechanism that underlines the process of neurodegeneration is not well understood. Understanding the process and mechanism involved in neurodegeneration might offer a better therapeutic approach to positively manage cases of neurodegenerative diseases. Therefore, this study’s target was to create an animal model to study neurodegeneration. Sixteen adult male Wistar rats were used in the study and divided into two groups. Control (0.2 mL of normal saline (NS)), and trimethyltin-treated (TMT, 8 mg/kg stat dose only). These animals underwent perfusion with 4% paraformaldehyde, brain excision and analysis of p53 antigen, GFAP and Bielshowsky on these tissues. The results showed that animals in the control group showed presence of activated p53 antigen, reactive astrogliosis, neurofibrillary tangles, and amyloid plaques within the cytoplasm of the hippocampal cells. Cornus Ammonis (CA2) and (CA3) showed more of the trimethylrtin injury than CA1 and CA4. This study thus revealed that, intra-peritoneal administration of single dose of 8mg/kg of trimethyltin can offer an attractive disease model to study some neurodegenerative diseases. Keywords: p53 antigen, Bielshowsky, Glia fibrillary acidic protein, Trimethyltin, Hippocampus,

Styles APA, Harvard, Vancouver, ISO, etc.

44

FURUKAWA, Masashi, Yukinori KAKAZU et Norio OKINO. « Control of design process with petri net for CAD. » Journal of the Japan Society for Precision Engineering 54, n^o 1 (1988) : 157–63. http://dx.doi.org/10.2493/jjspe.54.157.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

45

Diaz, Alvaro, Isabel Cristina Salazar et Sara Correal. « Ergonomic Analysis and CAD Tools in the Design Process ». Design Principles and Practices : An International Journal—Annual Review 3, n^o 3 (2009) : 239–52. http://dx.doi.org/10.18848/1833-1874/cgp/v03i03/37672.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

46

Banerjee, Priyanka. « A Detail Process for CAD Based Breast Cancer Detection ». Journal of Cancer Research Updates 8 (25 décembre 2019) : 14–21. http://dx.doi.org/10.30683/1929-2279.2019.08.03.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

47

Liu, Lin, Zhong Yi Cai, Shao Hui Wang et Mine Zhe Li. « CAD Software Development for the Continuous Flexible Forming Process ». Advanced Materials Research 189-193 (février 2011) : 2907–10. http://dx.doi.org/10.4028/www.scientific.net/amr.189-193.2907.

Texte intégral

Résumé :

The software for the continuous flexible forming process was developed using Visual C++ platform. It can directly read the triangular mesh data of the CAD model. The three-dimensional model was reconstructed rapidly by using the core function of the OpenGL. Moreover, the mathematical model of adjusting the flexible rolls and the longitudinal curvature were established by this software. Using these mathematical descriptions the simulation of the continuous flexible forming process can be finished from the viewpoint of geometry.

Styles APA, Harvard, Vancouver, ISO, etc.

48

Mar, J., K. Bhargavan, S. G. Duvall, R. Firestone, D. J. Lucey, S. N. Nandgaonkar, S. Wu, Kaung-Shia Yu et F. Zarbakhsh. « EASE--An Application-Based CAD System for Process Design ». IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems 6, n^o 6 (novembre 1987) : 1032–38. http://dx.doi.org/10.1109/tcad.1987.1270344.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

49

Marttinen, A., et U. Kortela. « A CAD Package for Process Analysis and Control Design ». IFAC Proceedings Volumes 21, n^o 8 (août 1988) : 409–13. http://dx.doi.org/10.1016/s1474-6670(17)54987-3.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

50

Porto, T. S., R. C. Roperto, E. A. Campos, S. T. Porto-Neto et S. Teich. « Behavior of CAD/CAM materials after long thermocycling process ». Dental Materials 32 (2016) : e33. http://dx.doi.org/10.1016/j.dental.2016.08.068.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!