Littérature scientifique sur le sujet « PRISMATIC ELEMENT »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « PRISMATIC ELEMENT ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "PRISMATIC ELEMENT"
Klochkov, Yu V., A. P. Nikolaev, O. V. Vakhnina et M. Yu Klochkov. « Finit element model of pipeline discretization by prismatic elements ». IOP Conference Series : Materials Science and Engineering 698 (18 décembre 2019) : 066012. http://dx.doi.org/10.1088/1757-899x/698/6/066012.
Texte intégralGong, Jian, John L. Volakis et Helen T. G. Wang. « Efficient finite element simulation of slot antennas using prismatic elements ». Radio Science 31, no 6 (novembre 1996) : 1837–44. http://dx.doi.org/10.1029/96rs02423.
Texte intégralLEUNG, A. Y. T., et B. ZHU. « HEXAHEDRAL FOURIER p-ELEMENTS FOR VIBRATION OF PRISMATIC SOLIDS ». International Journal of Structural Stability and Dynamics 04, no 01 (mars 2004) : 125–38. http://dx.doi.org/10.1142/s0219455404001100.
Texte intégralGhesmi, Mahdi, et Bettar Ould el Moctar. « Application of contact elements to represent prismatic mechanical couplings ». MATEC Web of Conferences 272 (2019) : 01028. http://dx.doi.org/10.1051/matecconf/201927201028.
Texte intégralDharma, Adrian Pramudita, et Bambang Suryoatmono. « Non-Linear Buckling Analysis of Axially Loaded Column with Non-Prismatic I-Section ». Journal of the Civil Engineering Forum 5, no 3 (18 septembre 2019) : 263. http://dx.doi.org/10.22146/jcef.47607.
Texte intégralMaksymiuk, Yurii, Andrii Kozak, Ivan Martyniuk et Oleksandr Maksymiuk. « Features of derivation of formulas for calculation of nodal reactions and coefficients of matrix of rigidity of a finite element with averaged mechanical and geometrical parameters ». Building constructions. Theory and Practice, no 8 (29 novembre 2021) : 97–108. http://dx.doi.org/10.32347/2522-4182.8.2021.97-108.
Texte intégralCoulomb, J. L., F. X. Zgainski et Y. Marechal. « A pyramidal element to link hexahedral, prismatic and tetrahedral edge finite elements ». IEEE Transactions on Magnetics 33, no 2 (mars 1997) : 1362–65. http://dx.doi.org/10.1109/20.582509.
Texte intégralBai, Rui, Si-Wei Liu, Siu-Lai Chan et Feng Yu. « Flexural Buckling Strength of Tapered-I-Section Steel Columns Based on ANSI/AISC-360-16 ». International Journal of Structural Stability and Dynamics 19, no 11 (23 octobre 2019) : 1950134. http://dx.doi.org/10.1142/s0219455419501347.
Texte intégralIvanchenko, Grigory, Yurii Maksimyuk, Andriy Kozak et Ivan Martyniuk. « CONSTRUCTION OF SOLVING EQUATIONS OF SEMI-ANALYTICAL METHOD OF FINISHED ELEMENTS FOR PRISMATIC BODIES OF COMPLEX SHAPE ». Management of Development of Complex Systems, no 46 (24 juin 2021) : 55–62. http://dx.doi.org/10.32347/2412-9933.2021.46.55-62.
Texte intégralSuprun, T. T. « LOCAL APPROACH FOR EVALUATING HEAT TRANSFER OF PRISMATIC ELEMENTS ON A FLAT SURFACE ». Eurasian Physical Technical Journal 18, no 3 (37) (24 septembre 2021) : 43–47. http://dx.doi.org/10.31489/2021no3/43-47.
Texte intégralThèses sur le sujet "PRISMATIC ELEMENT"
Vijayakar, Sandeep M. « Finite element methods for quasi-prismatic bodies with application to gears / ». The Ohio State University, 1987. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487335992904337.
Texte intégralWalker, B. D. « A combined finite strip/finite element method for the analysis of partially prismatic thin-walled structures ». Thesis, University of Southampton, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.375679.
Texte intégralDia, Mouhamadou. « Hexahedral and prismatic solid-shell for nonlinear analysis of thin and medium-thick structures ». Thesis, Lyon, 2020. http://www.theses.fr/2020LYSEI040.
Texte intégralThin or medium-thick structures are naturally present in most power generation facilities: reactor building, pressurized pipelines, metal tanks or tarpaulins, reactor vessel, metal liners of containment chambers, to name but a few. A need currently expressed by EDF's engineering units is the modeling of the blistering phenomena of metal liners in reactor facilities. A liner is a metal sheet type structure that provides the impermeability function of nuclear power plants. Its modeling requires taking into account a contact-friction phenomenon causing pinching on the shell, plasticity under the effect of blistering and geometric nonlinearity (buckling type instability). To model the thermo-mechanical behavior of such a structure, the finite elements of plates and shells currently available do not seem to be up to the task. The first limitation attributable to these elements is the assumption of plane stresses which prevents the consideration of some natively three-dimensional constitutive laws. Secondly, due to their formulation with rotational degrees of freedom these elements do not offer facility of use when solving problems that take into account non-linear effects such as large geometric transformations, bi-facial friction-contact, buckling and following pressures. An alternative would be to use standard volume elements. However, the prohibitive computing cost of the latter is difficult to access for many industrial applications. The aim of this work is to propose a solution to this problem. We have proposed a solid-shell finite element formulation enriched in their pinching stress and strain and capable of reproducing accurately the behaviour of thin structures. This new finite element works with any type of three-dimensional behaviour law without restriction on stress fields. It can also be used for all types of mechanical problems: linear and nonlinear, frictional contact, large transformation, buckling, displacement-dependent pressure, etc. The numerical simulations carried out show satisfactory performances
Truscott, Simon. « A heterogenous three-dimensional computational model for wood drying ». Thesis, Queensland University of Technology, 2004. https://eprints.qut.edu.au/15960/1/Simon_Trustcott_Thesis.pdf.
Texte intégralTruscott, Simon. « A heterogenous three-dimensional computational model for wood drying ». Queensland University of Technology, 2004. http://eprints.qut.edu.au/15960/.
Texte intégralLi, Weibing. « Prismatic modular robotics enabled through active and passive elements ». Thesis, University of Leeds, 2018. http://etheses.whiterose.ac.uk/20112/.
Texte intégralEvcimen, Taylan Ulas. « The Effect Of Prismatic Roughness Elemnts On Hydraulic Jump ». Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12605792/index.pdf.
Texte intégralWinder, Brian Geoffrey. « Achieving Complex Motion with Fundamental Components for Lamina Emergent Mechanisms ». Diss., CLICK HERE for online access, 2008. http://contentdm.lib.byu.edu/ETD/image/etd2279.pdf.
Texte intégralBANSAL, ABHISHEK. « INFLUENCE OF SHAPE FACTOR OF PRISMATIC ELEMENT ON THE ENERGY OF RAYLEIGH WAVES ». Thesis, 2019. http://dspace.dtu.ac.in:8080/jspui/handle/repository/16965.
Texte intégralMacho, Gabriele A., D. Shimizu et I. R. Spears. « The effect of prism orientation and loading direction on contact stresses in prismatic enamel : implications for interpreting wear patterns ». 2005. http://hdl.handle.net/10454/3551.
Texte intégralThe ability of prisms to effectively dissipate contact stress at the surface will influence wear rates in teeth. The aim of this investigation was to begin to quantify the effect of prism orientation on surface stresses. Seven finite element models of enamel microstructure were created, each model differing in the angulation of prism orientation with regard to the wear surface. For validation purposes, the mechanical behavior of the model was compared with published experimental data. In order to test the enamel under lateral loads, a compressed food particle was dragged across the surface from the dentino-enamel junction (DEJ) towards the outer enamel surface (OES). Under these conditions, tensile stresses in the enamel model increased with increases in the coefficient of friction. More importantly, stresses were found to be lowest in models in which the prisms approach the surface at lower angles (i.e., more obliquely cut prisms), and highest when the prisms approached the surface at 60° (i.e., less obliquely cut). Finally, the direction of travel of the simulated food particle was reversed, allowing comparison of the difference in behavior between trailing and leading edge enamels (i.e., when the food particle was dragged either towards or away from the DEJ). Stresses at the trailing edge were usually lower than stresses at the leading edge. Taken together with what is known about prism orientation in primate teeth, such findings imply greater wear resistance at the intercuspal region and less wear resistance at the lateral enamel at midcrown. Such findings appear to be supported by archeological evidence.
Livres sur le sujet "PRISMATIC ELEMENT"
Hu, Yandong. Electrokinetic transport in microchannels with three-dimensional prismatic elements on the surface. 2005.
Trouver le texte intégralChapitres de livres sur le sujet "PRISMATIC ELEMENT"
Oñate, Eugenio. « Prismatic Structures. Finite Strip and Finite Prism Methods ». Dans Structural Analysis with the Finite Element Method Linear Statics, 675–728. Dordrecht : Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-1-4020-8743-1_11.
Texte intégralHinton, Ernest, Johann Sienz et Mustafa Özakça. « Basic Finite Element Formulation for Shells of Revolution ». Dans Analysis and Optimization of Prismatic and Axisymmetric Shell Structures, 127–40. London : Springer London, 2003. http://dx.doi.org/10.1007/978-0-85729-424-1_4.
Texte intégralHinton, Ernest, Johann Sienz et Mustafa Özakça. « Basic Finite Element Formulation for Vibrating Axisymmetric Shells ». Dans Analysis and Optimization of Prismatic and Axisymmetric Shell Structures, 245–78. London : Springer London, 2003. http://dx.doi.org/10.1007/978-0-85729-424-1_7.
Texte intégralChaudhury, Arkadeep Narayan, Arnab Ghosh, Krishnendu Banerjee, Abhijit Mondal et Debasis Datta. « Analysis of Prismatic Springs of Non-circular Coil Shape Using Finite Element Method ». Dans Lecture Notes in Mechanical Engineering, 243–51. New Delhi : Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2740-3_24.
Texte intégralFontenla-Carrera, Gabriel, Ángel Manuel Fernández Vilán et Pablo Izquierdo Belmonte. « Automatic Identification of Kinematic Diagrams with Computer Vision ». Dans Proceedings of the XV Ibero-American Congress of Mechanical Engineering, 425–31. Cham : Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-38563-6_62.
Texte intégralEslami, M. Reza. « Torsion of Prismatic Bars ». Dans Finite Elements Methods in Mechanics, 229–36. Cham : Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-08037-6_11.
Texte intégralCuomo, M., A. Greco et M. Romano. « Eigenfrequencies Estimates for Structures with Non-Prismatic Elements ». Dans Numerical Treatment of Eigenvalue Problems Vol.4 / Numerische Behandlung von Eigenwertaufgaben Band 4, 62–76. Basel : Birkhäuser Basel, 1987. http://dx.doi.org/10.1007/978-3-0348-7507-3_6.
Texte intégral« Prismatic Pentahedron T9 : Assumed Displacement Distribution ». Dans Finite Element Structural Analysis : New Concepts, 99–105. Reston ,VA : American Institute of Aeronautics and Astronautics, 2009. http://dx.doi.org/10.2514/5.9781563479991.0099.0105.
Texte intégral« Prismatic Pentahedron T10 : Assumed Displacement Distribution plus Corrective Distribution Inside the Element Boundaries ». Dans Finite Element Structural Analysis : New Concepts, 107–17. Reston ,VA : American Institute of Aeronautics and Astronautics, 2009. http://dx.doi.org/10.2514/5.9781563479991.0107.0117.
Texte intégral« 10 MOHR CIRCLE OF STRESS WHEN A PRISMATIC ELEMENT IS SUBJECTED TO NORMAL AND SHEAR STRESSES ». Dans Geotechnical Engineering, 289. CRC Press, 2002. http://dx.doi.org/10.1201/9781482275858-137.
Texte intégralActes de conférences sur le sujet "PRISMATIC ELEMENT"
Pedreiro, Marcelo R. de Matos, Rogério de O. Rodrigues, Maicon Marino Albertini et Jefferson S. Camacho. « EXPLICIT STIFFNESS MATRIX FOR PARABOLIC PRISMATIC TRIANGULAR ELEMENT ». Dans 10th World Congress on Computational Mechanics. São Paulo : Editora Edgard Blücher, 2014. http://dx.doi.org/10.5151/meceng-wccm2012-20360.
Texte intégralDwarshuis, Koen, Ronald Aarts, Marcel Ellenbroek et Dannis Brouwer. « A Non-Prismatic Beam Element for the Optimization of Flexure Mechanisms ». Dans ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22242.
Texte intégralAl-Bedoor, B. O., et Y. A. Khulief. « Finite Element Dynamic Modeling of Elastic Beam With Prismatic Joint ». Dans ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0080.
Texte intégralCosby, Austin, et Ernesto Gutierrez-Miravete. « Finite Element Analysis Conversion Factors for Natural Vibrations of Beams ». Dans ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-37261.
Texte intégralYamaguchi, Tadashi, Yoshihiro Kawase, Shunsuke Hori et Yoshiki Iwai. « 3-D parallel finite element method with prismatic edge elements for dynamic analysis of electromagnets ». Dans 2015 18th International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2015. http://dx.doi.org/10.1109/icems.2015.7385179.
Texte intégralMigliaccio, G. « Stress and strain fields in non-prismatic inhomogeneous beams ». Dans AIMETA 2022. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902431-27.
Texte intégralMocera, Francesco, Elena Vergori et Aurelio Soma. « Finite element versus experimental Thermo-mechanical behaviour of prismatic Li-Ion cell ». Dans 2019 Fourteenth International Conference on Ecological Vehicles and Renewable Energies (EVER). IEEE, 2019. http://dx.doi.org/10.1109/ever.2019.8813653.
Texte intégralAmor-Martin, Adrian, Daniel Garcia-Donoro et Luis E. Garcia-Castillo. « Analysis of dispersion error of higher-order curl-conforming prismatic finite element ». Dans 2017 IEEE MTT-S International Conference on Numerical Electromagnetic and Multiphysics Modeling and Optimization for RF, Microwave, and Terahertz Applications (NEMO). IEEE, 2017. http://dx.doi.org/10.1109/nemo.2017.7964234.
Texte intégralSitaram, Pattabhi, Bipin Pai et Rachel Mok. « Elasto-Plastic Analysis of Prismatic Folded Plates by the Finite Element Method ». Dans ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88195.
Texte intégralPandya, S., et M. Hafez. « A finite-element approach for modeling inviscid and viscous compressible flows using prismatic grids ». Dans 14th Computational Fluid Dynamics Conference. Reston, Virigina : American Institute of Aeronautics and Astronautics, 1999. http://dx.doi.org/10.2514/6.1999-3310.
Texte intégralRapports d'organisations sur le sujet "PRISMATIC ELEMENT"
Beckett-Brown, C. E., A. M. McDonald et M. B. McClenaghan. Discovering a porphyry deposit using tourmaline : a case study from Yukon. Natural Resources Canada/CMSS/Information Management, 2023. http://dx.doi.org/10.4095/331349.
Texte intégral