Littérature scientifique sur le sujet « Printing method »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Sommaire
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Printing method ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Printing method"
Phillips, Michael. « “Printing in the infernal method” : William Blake’s method of “Illuminated Printing” ». Interfaces, no 39 (1 juillet 2018) : 67–89. http://dx.doi.org/10.4000/interfaces.489.
Texte intégralChen, Ni, Qiang Wang, Ping Yang et Jun Long Xu. « Research on the Evaluation of Digital Prints Quality Based on Noise ». Applied Mechanics and Materials 731 (janvier 2015) : 222–27. http://dx.doi.org/10.4028/www.scientific.net/amm.731.222.
Texte intégralPeng Liu, Peng Liu, Ning Zhao Ning Zhao, Linghui Ren Linghui Ren et Qianqian Xu Qianqian Xu. « Color restoration method of printing in machine visual detection ». Chinese Optics Letters 12, s1 (2014) : S11501–311506. http://dx.doi.org/10.3788/col201412.s11501.
Texte intégralYang, Minhua, Xin-guang Lv, Xiao-jie Liu et Jia-qing Zhang. « Research on color 3D printing based on color adherence ». Rapid Prototyping Journal 24, no 1 (2 janvier 2018) : 37–45. http://dx.doi.org/10.1108/rpj-07-2016-0112.
Texte intégralShen, Xiaoqiang, Zhiheng Yu, Fengli Huang, Jinmei Gu et Hui Zhang. « Fabrication of 3D microstructures for flexible pressure sensors based on direct-writing printing ». AIP Advances 12, no 10 (1 octobre 2022) : 105205. http://dx.doi.org/10.1063/5.0107003.
Texte intégralVaganov, A. V., S. S. Shemelyunas, A. A. Shvedunenko et A. M. Makarov. « 3D PRINTING TIME REDUCTION METHOD ». Izvestia Volgograd State Technical University, no 3 (2022) : 47–49. http://dx.doi.org/10.35211/1990-5297-2022-3-262-47-49.
Texte intégralPhillips, Michael. « "Printing in the Infernal Method" ». Interfaces 30, no 1 (2010) : 21–34. http://dx.doi.org/10.3406/inter.2010.1369.
Texte intégralPhung, Thanh-Huy. « An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed ». NIP & ; Digital Fabrication Conference 33, no 1 (1 novembre 2017) : 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.126.
Texte intégralPhung, Thanh-Huy. « An Electrohydrodynamic (EHD) Jet Printing Method for Increasing Printing Speed ». NIP & ; Digital Fabrication Conference 33, no 1 (1 novembre 2017) : 126–27. http://dx.doi.org/10.2352/issn.2169-4451.2017.33.1.art00030_1.
Texte intégralJi, Wen Ge, Hua Wu, Jing Shen et Mei Feng Wang. « A Novel and Efficient Method for Digital Printing ». Applied Mechanics and Materials 404 (septembre 2013) : 668–71. http://dx.doi.org/10.4028/www.scientific.net/amm.404.668.
Texte intégralThèses sur le sujet "Printing method"
Kanani, Chirantan. « Cell Printing : A novel method to seed cells onto biological scaffolds ». Digital WPI, 2012. https://digitalcommons.wpi.edu/etd-theses/332.
Texte intégralHoleman, Tara. « The Systematic Approach to Microplotter Printing of Perovskite Precursors ». Ohio University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1534795066623052.
Texte intégralBishop, Craig, Ian Armstrong et Rolando Navarette. « A Novel Method for 3D Printing High Conductivity Alloys for UHF Applications ». International Foundation for Telemetering, 2014. http://hdl.handle.net/10150/577400.
Texte intégralTraditional approaches to constructing 3D structural electronics with conductive and dielectric materials include ink-jet printed, silver-bearing ink and fine copper wire meshes. One approach combines stereo-lithographic 3D-printed photo-polymers with direct-printed silver-bearing conductive inks. Results have shown 3D conductive structures with conductivities in the range 2x10⁶ to 1x10⁷ S/m using annealing temperatures ranging from 110°C to 150°C for 10 to 15 minutes. However, the stereo-lithographic approach suffers from the high cost of the printer and structural deformation during annealing. This paper presents a new method for 3d printing high conductivity metal alloys using consumer-grade 3D printer. The design and construction of the necessary modification will be presented in addition to the new 3D design process. The method yields metal structures with expected conductivities exceeding 2.6x10⁶ S/m. The process is performed without an annealing step, so the polymeric structural material is not exposed to high temperatures for any prolonged time. A UHF ISM band antenna is constructed for an RFID application using this method, the antenna performance is measured, and the results are compared simulations in Ansys HFSS. This new method can reduce total cost, and several low melting-point alloys could raise the conductivity.
Latanision, Ivan M. « A comparison between the staggered position one-angle screening and the multi-angle screening method in terms of misregistration when printing process color on newsprint / ». Online version of thesis, 1992. http://hdl.handle.net/1850/11251.
Texte intégralFuller, Sawyer Buckminster 1977. « A fast flexible ink-jet printing method for patterning networks of neurons in culture ». Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/89393.
Texte intégralOttesen, Vegar. « Bacterial Microarrays by Microcontact Printing : Development of a Method for Immobilizing Live Bacteria on Microarrays ». Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for fysikk, 2014. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-26120.
Texte intégralMcMaster, Rebecca J. « A simple method towards 3D-printing and crosslinking partially hydrolysed poly(2-ethyl-2-oxazoline) ». Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/109910/1/Rebecca_McMaster_Thesis.pdf.
Texte intégralYuan, Kaiwen. « A 3d printing and moulding method of the fabrication of a miniature voice coil motor actuator ». Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/54008.
Texte intégralApplied Science, Faculty of
Mechanical Engineering, Department of
Graduate
Özkol, Emre [Verfasser]. « Evaluation of the direct inkjet printing method for the fabrication of three-dimensional ceramic components / Emre Özkol ». Aachen : Hochschulbibliothek der Rheinisch-Westfälischen Technischen Hochschule Aachen, 2012. http://d-nb.info/1027765947/34.
Texte intégralAl-Khudary, Nadine. « Material thermal conductivity measurement by the 3-omega method : application to polymers characterization using inkjet printing technology ». Thesis, Lille 1, 2014. http://www.theses.fr/2014LIL10135/document.
Texte intégralThe characterization of polymers is gaining a great attention as they are one of the main constituents of future flexible or organic electronics. Given the fact that thermal management is an important issue in the frame work of flexible electronics, the knowledge of the thermal conductivity of polymer materials is needed. In this work, we propose the measurement of polymer material thermal conductivity using the three omega method. This method requires heating a metallic line conductor placed on the surface of the material under test by an alternating current source. The first measurements were done on polydimethyl siloxane (PDMS) polymer material for which a special procedure that consists in embedding the metallic line conductors near the surface has been applied.In addition to the well-known limitations of photolithography process which are the cost and the process duration, a particular concern lies in the fabrication of the metallic conductors by such process which might be destructive in case of polymer materials. Consequently, we propose an alternative method for this kind of materials based on inkjet printing technology. The thermal conductivities of polyimide and polyetherether ketone have been successfully measured using the three omega method combined with inkjet printing technology for sample preparation. Numerical simulations using finite element method (FEM) are also performed. Finally, experimental measurements are compared to Cahill’s analytical solution and FEM modelling. The overall results demonstrate that the inkjet printing technology is a good candidate for the characterization of flexible materials in terms of thermal conductivity
Livres sur le sujet "Printing method"
Clifton, Merritt. The Samisdat method : A do-it-yourself guide to printing. 4e éd. Rensselaer, New York : Factsheet Five, 1990.
Trouver le texte intégralEskola, Taneli. Polymer photogravure : A new method for photographers and graphic artists. Helsinki : University of Art and Design Helsinki, 1996.
Trouver le texte intégralMcBride, James. A method of selecting final colours for reproduction on ceramic tiles by screen-printing. London : LCP, 2002.
Trouver le texte intégralCho, Hyŏng-jin. "Chikchi" pogwŏn yŏn'gu : Koryŏ sidae millap chujobŏp kŭmsok hwalcha inswaesul = A study on restoration of Jikji : metal typography of wax casting method in Korye dynasty. 8e éd. Kyŏnggi-do P'aju-si : Han'guk Haksul Chŏngbo, 2019.
Trouver le texte intégralRowlatt, K. Reprographic Methods. Essex, England : Longman Publishing Group, 1986.
Trouver le texte intégralPoulter, S. R. C. Developments in flexographic methods for newspaper printing. Leatherhead : Pira, Printing and Information Technology Division, 1985.
Trouver le texte intégral1943-, Kipphan Helmut, dir. Handbook of print media : Technologies and production methods. Berlin : Springer, 2001.
Trouver le texte intégralRuggles, Philip Kent. Printing estimating : Costing methods for digital and traditional graphic imaging. 4e éd. Albany : Delmar Publishers, 1996.
Trouver le texte intégralWhite, Jessica. Letterpress now : A DIY guide to new & old printing methods. Asheville : Lark Crafts, an imprint of Sterling Publishing Co., Inc., 2012.
Trouver le texte intégralClem, John C. Prepress for digital printing : An introduction to prepress methods for the digital age. Baldwin, KS : Trio Publications, 2003.
Trouver le texte intégralChapitres de livres sur le sujet "Printing method"
de Witte, Dennis. « Printing method ». Dans Clay Printing, 111–27. Wiesbaden : Springer Fachmedien Wiesbaden, 2022. http://dx.doi.org/10.1007/978-3-658-37161-6_8.
Texte intégralYin, Zhouping, YongAn Huang, Yongqing Duan et Haitao Zhang. « Control Method for EHD Printing ». Dans Electrohydrodynamic Direct-Writing for Flexible Electronic Manufacturing, 133–56. Singapore : Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4759-6_6.
Texte intégralWan, Qian, Li Wang et Guowei Ma. « Adaptable Tool-Path Planning Method for 3D Concrete Printing Based on the Mapping Method ». Dans Proceedings of the 2020 DigitalFUTURES, 255–64. Singapore : Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4400-6_24.
Texte intégralZeitlyn, Jonathan. « 1. Choices of Printing Method ; Design Ideas ». Dans Low Cost Printing for Development, 7–18. Rugby, Warwickshire, United Kingdom : Practical Action Publishing, 1989. http://dx.doi.org/10.3362/9781780445342.001.
Texte intégralMarchment, Taylor, et Jay Sanjayan. « Penetration Reinforcing Method for 3D Concrete Printing ». Dans RILEM Bookseries, 680–90. Cham : Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49916-7_68.
Texte intégralPang, Yechi, Zhuangzhi Ye et Zhijie Li. « Gravable Printing Plate Surface Defect Intelligent Detection Method ». Dans Advances in Graphic Communication, Printing and Packaging, 569–79. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3663-8_78.
Texte intégralLi, Yulong, Chengxin Li, Danfeng Jiang, Feng Liu, Xiajie Liu et Li Li. « Preparation and Shielding Performance of Gamma Ray Shielding Composite Materials Based on 3D Printing Technology ». Dans Springer Proceedings in Physics, 596–608. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1023-6_52.
Texte intégralChen, Jiahui, Jinda Zhu, Zhiying Qin, Yuejing Zhao, Fuxiang Zhang et Fengshan Huang. « Digital Twin Fault Diagnosis Method for Complex Equipment Transmission Device ». Dans Innovative Technologies for Printing and Packaging, 412–19. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-9024-3_51.
Texte intégralZhang, Zhuoran, Qiang Wang et Weiyan Zhang. « Research on Evaluation Method of Scanner Imaging Quality ». Dans Advances in Graphic Communication, Printing and Packaging, 301–8. Singapore : Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3663-8_41.
Texte intégralShi, Keqiang, Shanhui Liu, Zengqiang Zhang, Song Qian et Han Zhang. « Modeling Method of Guide Roller Manufacturing Information Based on Ontology Modeling ». Dans Innovative Technologies for Printing and Packaging, 420–24. Singapore : Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-9024-3_52.
Texte intégralActes de conférences sur le sujet "Printing method"
Nagato, Hitoshi, et Tadayoshi Ohno. « Bidirectional printing method for a thermal ink transfer printer ». Dans Printing Technologies for Images, Gray Scale, and Color, sous la direction de Derek B. Dove, Takao Abe et Joachim L. Heinzl. SPIE, 1991. http://dx.doi.org/10.1117/12.46338.
Texte intégralShi-hui, Wang, Wang Yi-ming et Wu Shu-qin. « Research on printing registration recognition method ». Dans 2017 3rd IEEE International Conference on Computer and Communications (ICCC). IEEE, 2017. http://dx.doi.org/10.1109/compcomm.2017.8322917.
Texte intégralAli, Md Hazrat, Gaziz Yerbolat et Shynggys Amangeldi. « Material Optimization Method in 3D Printing ». Dans 2018 IEEE International Conference on Advanced Manufacturing (ICAM). IEEE, 2018. http://dx.doi.org/10.1109/amcon.2018.8614886.
Texte intégralHendriko, Hendriko, Prayoga Bagaskara et Dimas Permana. « Development of An Automatic Cup Printing Machine Using a Screen Printing Method ». Dans Proceedings of the 11th International Applied Business and Engineering Conference, ABEC 2023, September 21st, 2023, Bengkalis, Riau, Indonesia. EAI, 2024. http://dx.doi.org/10.4108/eai.21-9-2023.2342890.
Texte intégralInui, Tetsuya, Junji Hirokane, Kenji Ohta, Hideyoshi Yamaoka et Toshio Ishikawa. « Magneto-Optical Disk By Contact Printing Method ». Dans OE/LASE '89, sous la direction de Gordon R. Knight et Clark N. Kurtz. SPIE, 1989. http://dx.doi.org/10.1117/12.952763.
Texte intégralFuruta, Atsuhiro, Kazuki Honjo et Jun Taniguchi. « Fabrication of Flexible Interposer Using Printing Method ». Dans JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/lemp2020-8524.
Texte intégralMoscicki, Andrzej, Tomasz Falat, Anita Smolarek, Andrzej Kinart, Jan Felba et Janusz Borecki. « Interconnection process by ink jet printing method ». Dans 2012 IEEE 12th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2012. http://dx.doi.org/10.1109/nano.2012.6322108.
Texte intégralBo Li, Junbiao Liu, Zhiping Wang et Guangrong Fang. « Graphic printing method for New Braille Printer ». Dans 2010 IEEE Youth Conference on Information, Computing and Telecommunications (YC-ICT). IEEE, 2010. http://dx.doi.org/10.1109/ycict.2010.5713067.
Texte intégralKaplan, Daphna, et Yoav Sterman. « Buildup : FDM Method for Printing Textural Surfaces ». Dans SCF '23 : Symposium on Computational Fabrication. New York, NY, USA : ACM, 2023. http://dx.doi.org/10.1145/3623263.3629156.
Texte intégralInui, Tetsuya, Junji Hirokane, Kenji Ohta, Hideyoshi Yamaoka et Toshio Ishikawa. « Magneto-Optical Disk by Contact Printing Method ». Dans Optical Data Storage. Washington, D.C. : Optica Publishing Group, 1989. http://dx.doi.org/10.1364/ods.1989.wd3.
Texte intégralRapports d'organisations sur le sujet "Printing method"
Martens, Niles. The paper stencil method of silk screen printing. Portland State University Library, janvier 2000. http://dx.doi.org/10.15760/etd.701.
Texte intégralHerriot, R., T. Hastings et H. Lewis. Internet Printing Protocol (IPP) : The 'ippget' Delivery Method for Event Notifications. RFC Editor, mars 2005. http://dx.doi.org/10.17487/rfc3996.
Texte intégralStrauss, Bernhard, Britta Kleinsorge et Pantea Lotfian. 3D printing technologies in the food system for food production and packaging. Food Standards Agency, mars 2023. http://dx.doi.org/10.46756/sci.fsa.suv860.
Texte intégralKennedy, Alan, Mark Ballentine, Andrew McQueen, Christopher Griggs, Arit Das et Michael Bortner. Environmental applications of 3D printing polymer composites for dredging operations. Engineer Research and Development Center (U.S.), janvier 2021. http://dx.doi.org/10.21079/11681/39341.
Texte intégralWijaya, Ignasius P. A., Eric Kreiger et Asuf Masud. An elastic-inelastic model and embedded bounce-back control for layered printing with cementitious materials. Engineer Research and Development Center (U.S.), janvier 2024. http://dx.doi.org/10.21079/11681/48091.
Texte intégralOvalle, Samuel, E. Viamontes et Tony Thomas. Optimization of DLP 3D Printed Ceramic Parts. Florida International University, octobre 2021. http://dx.doi.org/10.25148/mmeurs.009776.
Texte intégralLozynskyi, Maryan. Main Features of Publishing Activities of the Ivan Franko National University of Lviv (end of the 1990s – first two decades of the 21st c.). Ivan Franko National University of Lviv, février 2022. http://dx.doi.org/10.30970/vjo.2022.51.11392.
Texte intégralDuan, Mengjie, Li Liu, Guillaume Da et Evelyne Géhin. ASSESSING THE RELATIVE IMPORTANCE OF MUCOSAL EXPOSURE AND INHALATION EXPOSURE TO AIRBORNE PARTICLES. Department of the Built Environment, 2023. http://dx.doi.org/10.54337/aau541653952.
Texte intégralBallentine, Mark, Alan Kennedy, Nicholas Melby, Andrew McQueen, Christopher Griggs et Ashley Kimble. Approach for on-site, on-demand contaminant-removal devices enabled by low-cost 3D printing. Engineer Research and Development Center (U.S.), mars 2024. http://dx.doi.org/10.21079/11681/48353.
Texte intégralKennedy, Alan, Andrew McQueen, Mark Ballentine, Brianna Fernando, Lauren May, Jonna Boyda, Christopher Williams et Michael Bortner. Sustainable harmful algal bloom mitigation by 3D printed photocatalytic oxidation devices (3D-PODs). Engineer Research and Development Center (U.S.), avril 2022. http://dx.doi.org/10.21079/11681/43980.
Texte intégral