Articles de revues sur le sujet « Printed Periodic Metallic Geometries »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Printed Periodic Metallic Geometries ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.
Sujatha, M. N., et Vijeshree Kadiya. « A subcell based approach for enhancing the absorption bandwidth of microwave absorbers using printed periodic metallic geometries ». Engineering Science and Technology, an International Journal 22, no 1 (février 2019) : 385–90. http://dx.doi.org/10.1016/j.jestch.2018.08.008.
Texte intégralGáspár, Igor, et Réka Neczpál. « Testing of 3D Printed Turbulence Promoters for Membrane Filtration ». Periodica Polytechnica Chemical Engineering 64, no 3 (25 mai 2020) : 371–76. http://dx.doi.org/10.3311/ppch.15211.
Texte intégralZhao, Zijian, Guang Yang et Kun Zhao. « 3D Printing of Mg-Based Bulk Metallic Glasses with Proper Laser Power and Scanning Speed ». Metals 12, no 8 (5 août 2022) : 1318. http://dx.doi.org/10.3390/met12081318.
Texte intégralWang, Jun, Rahul Rai et Jason N. Armstrong. « Investigation of compressive deformation behaviors of cubic periodic cellular structural cubes through 3D printed parts and FE simulations ». Rapid Prototyping Journal 26, no 3 (17 novembre 2019) : 459–72. http://dx.doi.org/10.1108/rpj-03-2019-0069.
Texte intégralSu, Huanhuan, Shan Wu, Yuhan Yang, Qing Leng, Lei Huang, Junqi Fu, Qianjin Wang, Hui Liu et Lin Zhou. « Surface plasmon polariton–enhanced photoluminescence of monolayer MoS2 on suspended periodic metallic structures ». Nanophotonics 10, no 2 (24 novembre 2020) : 975–82. http://dx.doi.org/10.1515/nanoph-2020-0545.
Texte intégralSangiorgio, Valentino, Fabio Parisi, Francesco Fieni et Nicola Parisi. « The New Boundaries of 3D-Printed Clay Bricks Design : Printability of Complex Internal Geometries ». Sustainability 14, no 2 (6 janvier 2022) : 598. http://dx.doi.org/10.3390/su14020598.
Texte intégralAgyapong, Johnson N., Bo Van Durme, Sandra Van Vlierberghe et James H. Henderson. « Surface Functionalization of 4D Printed Substrates Using Polymeric and Metallic Wrinkles ». Polymers 15, no 9 (28 avril 2023) : 2117. http://dx.doi.org/10.3390/polym15092117.
Texte intégralLee, Sung-Ho, Sang-Yoon Gee, Chul Kang et Chul-Sik Kee. « Terahertz Wave Transmission Properties of Metallic Periodic Structures Printed on a Photo-paper ». Journal of the Optical Society of Korea 14, no 3 (25 septembre 2010) : 282–85. http://dx.doi.org/10.3807/josk.2010.14.3.282.
Texte intégralKim, Jiho, et Dong-Jin Yoo. « 3D printed compact heat exchangers with mathematically defined core structures ». Journal of Computational Design and Engineering 7, no 4 (7 avril 2020) : 527–50. http://dx.doi.org/10.1093/jcde/qwaa032.
Texte intégralZhai, Guohua, Yong Cheng, Qiuyan Yin, Shouzheng Zhu et Jianjun Gao. « Uniplanar Millimeter-Wave Log-Periodic Dipole Array Antenna Fed by Coplanar Waveguide ». International Journal of Antennas and Propagation 2013 (2013) : 1–5. http://dx.doi.org/10.1155/2013/430618.
Texte intégralLegett, Shelbie A., Xavier Torres, Andrew M. Schmalzer, Adam Pacheco, John R. Stockdale, Samantha Talley, Tom Robison et Andrea Labouriau. « Balancing Functionality and Printability : High-Loading Polymer Resins for Direct Ink Writing ». Polymers 14, no 21 (1 novembre 2022) : 4661. http://dx.doi.org/10.3390/polym14214661.
Texte intégralDallacasa, Valerio. « Diffraction Effects in the Propagation of Radiation in Polarizable Layers ». Journal of Nanoscience and Nanotechnology 8, no 2 (1 février 2008) : 595–601. http://dx.doi.org/10.1166/jnn.2008.d084.
Texte intégralGoussetis, G., A. P. Feresidis et J. C. Vardaxoglou. « Tailoring the AMC and EBG Characteristics of Periodic Metallic Arrays Printed on Grounded Dielectric Substrate ». IEEE Transactions on Antennas and Propagation 54, no 1 (janvier 2006) : 82–89. http://dx.doi.org/10.1109/tap.2005.861575.
Texte intégralSugino, Christopher, Romain Gerbe, Ehren Baca, Charles Reinke, Massimo Ruzzene, Alper Erturk et Ihab El-kady. « Machined phononic crystals to block high-order Lamb waves and crosstalk in through-metal ultrasonic communication systems ». Applied Physics Letters 120, no 19 (9 mai 2022) : 191705. http://dx.doi.org/10.1063/5.0083380.
Texte intégralFelix, Levi C., Vladimir Gaál, Cristiano F. Woellner, Varlei Rodrigues et Douglas S. Galvao. « Mechanical Properties of Diamond Schwarzites : From Atomistic Models to 3D-Printed Structures ». MRS Advances 5, no 33-34 (2020) : 1775–81. http://dx.doi.org/10.1557/adv.2020.175.
Texte intégralAl-Ketan, Oraib, Reza Rowshan et Rashid K. Abu Al-Rub. « Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials ». Additive Manufacturing 19 (janvier 2018) : 167–83. http://dx.doi.org/10.1016/j.addma.2017.12.006.
Texte intégralNitoi, Alexandra, Mihai Alin Pop, Ting Ting Peng, Tibor Bedő, Sorin Ion Munteanu, Ioana Ghiuta et Daniel Munteanu. « Build Orientation Influence on some Mechanical Properties of 3D-Printed Polyamide Specimens ». Advanced Engineering Forum 34 (octobre 2019) : 3–9. http://dx.doi.org/10.4028/www.scientific.net/aef.34.3.
Texte intégralLiu, Yuchun, Swee Leong Sing, Rebecca Xin En Lim, Wai Yee Yeong et Bee Tin Goh. « Preliminary Investigation on the Geometric Accuracy of 3D Printed Dental Implant Using a Monkey Maxilla Incisor Model ». International Journal of Bioprinting 8, no 1 (28 janvier 2022) : 476. http://dx.doi.org/10.18063/ijb.v8i1.476.
Texte intégralMa, Quoc-Phu, Jakub Mesicek, Frantisek Fojtik, Jiri Hajnys, Pavel Krpec, Marek Pagac et Jana Petru. « Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method ». Materials 15, no 17 (1 septembre 2022) : 6057. http://dx.doi.org/10.3390/ma15176057.
Texte intégralNguyen, Lan. « A MIMO Antenna with Enhanced Gain using Metasurface ». Applied Computational Electromagnetics Society 36, no 4 (10 mai 2021) : 458–64. http://dx.doi.org/10.47037/2020.aces.j.360412.
Texte intégralNóbrega, Clarissa de Lucena, Marcelo Ribeiro da Silva, Paulo Henrique da Fonseca Silva, Adaildo Gomes D’Assunção et Gláucio Lima Siqueira. « Simple, Compact, and Multiband Frequency Selective Surfaces Using Dissimilar Sierpinski Fractal Elements ». International Journal of Antennas and Propagation 2015 (2015) : 1–5. http://dx.doi.org/10.1155/2015/614780.
Texte intégralTeng, Fei, Ching-Heng Shiau, Cheng Sun, Robert C. O’Brien et Michael D. McMurtrey. « Investigation of Deformation Behavior of Additively Manufactured AISI 316L Stainless Steel with In Situ Micro-Compression Testing ». Materials 16, no 17 (31 août 2023) : 5980. http://dx.doi.org/10.3390/ma16175980.
Texte intégralShams, M., Z. Mansurov, C. Daulbayev et B. Bakbolat. « Effect of Lattice Structure and Composite Precursor on Mechanical Properties of 3D-Printed Bone Scaffolds ». Eurasian Chemico-Technological Journal 23, no 4 (31 décembre 2021) : 257. http://dx.doi.org/10.18321/ectj1129.
Texte intégralFlorencio, Rafael, Álvaro Somolinos, Iván González et Felipe Cátedra. « BICGSTAB-FFT Method of Moments with NURBS for Analysis of Planar Generic Layouts Embedded in Large Multilayer Structures ». Electronics 9, no 9 (9 septembre 2020) : 1476. http://dx.doi.org/10.3390/electronics9091476.
Texte intégralPeng, Pei-Wen, Jen-Chang Yang, Wei-Fang Lee, Chih-Yuan Fang, Chun-Ming Chang, I.-Jan Chen, Chengpo Hsu et Tzu-Sen Yang. « Effects of Heat Treatment of Selective Laser Melting Printed Ti-6Al-4V Specimens on Surface Texture Parameters and Cell Attachment ». Applied Sciences 11, no 5 (3 mars 2021) : 2234. http://dx.doi.org/10.3390/app11052234.
Texte intégralXu, Peng, Wei Xiang Jiang, Xiao Cai, Yue Gou et Tie Jun Cui. « A high-efficiency and ultrathin transmission-type circular polarization converter based on surface structure ». EPJ Applied Metamaterials 8 (2021) : 4. http://dx.doi.org/10.1051/epjam/2021002.
Texte intégralMandache, Catalin, Richard Desnoyers et Yan Bombardier. « Crack Growth Monitoring with Structure-Bonded Thin and Flexible Coils ». Sensors 22, no 24 (17 décembre 2022) : 9958. http://dx.doi.org/10.3390/s22249958.
Texte intégralCuesta, I. I., A. Díaz, M. A. Rojo, L. B. Peral, J. Martínez et J. M. Alegre. « Parameter Optimisation in Selective Laser Melting on C300 Steel ». Applied Sciences 12, no 19 (28 septembre 2022) : 9786. http://dx.doi.org/10.3390/app12199786.
Texte intégralParedes, Ferran, Cristian Herrojo, Ana Moya, Miguel Berenguel Alonso, David Gonzalez, Pep Bruguera, Claudia Delgado Simao et Ferran Martín. « Electromagnetic Encoders Screen-Printed on Rubber Belts for Absolute Measurement of Position and Velocity ». Sensors 22, no 5 (5 mars 2022) : 2044. http://dx.doi.org/10.3390/s22052044.
Texte intégralZafar, Mudasar, Hamzah Sakidin, Mikhail Sheremet, Iskandar B. Dzulkarnain, Abida Hussain, Roslinda Nazar, Javed Akbar Khan et al. « Recent Development and Future Prospective of Tiwari and Das Mathematical Model in Nanofluid Flow for Different Geometries : A Review ». Processes 11, no 3 (10 mars 2023) : 834. http://dx.doi.org/10.3390/pr11030834.
Texte intégralEvsevleev, Sergei, Tatiana Mishurova, Dmitriy Khrapov, Aleksandra Paveleva, Dietmar Meinel, Roman Surmenev, Maria Surmeneva, Andrey Koptyug et Giovanni Bruno. « X-ray Computed Tomography Procedures to Quantitatively Characterize the Morphological Features of Triply Periodic Minimal Surface Structures ». Materials 14, no 11 (1 juin 2021) : 3002. http://dx.doi.org/10.3390/ma14113002.
Texte intégralWu, Wenjing, Bo Yuan et Aiting Wu. « A Quad-Element UWB-MIMO Antenna with Band-Notch and Reduced Mutual Coupling Based on EBG Structures ». International Journal of Antennas and Propagation 2018 (2018) : 1–10. http://dx.doi.org/10.1155/2018/8490740.
Texte intégralSancho, R., F. Galvez, C. L. Garrido, S. Perosanz-Amarillo et D. Barba. « On the mechanical behaviour of additively manufactured metamaterials under dynamic conditions ». EPJ Web of Conferences 250 (2021) : 05006. http://dx.doi.org/10.1051/epjconf/202125005006.
Texte intégralKoplin, Christof, Eric Schwarzer-Fischer, Eveline Zschippang, Yannick Marian Löw, Martin Czekalla, Arthur Seibel, Anna Rörich et al. « Design of Reliable Remobilisation Finger Implants with Geometry Elements of a Triple Periodic Minimal Surface Structure via Additive Manufacturing of Silicon Nitride ». J 6, no 1 (18 mars 2023) : 180–97. http://dx.doi.org/10.3390/j6010014.
Texte intégralDing, Liping, Shujie Tan, Wenliang Chen, Yaming Jin et Yicha Zhang. « Manufacturability analysis of extremely fine porous structures for selective laser melting process of Ti6Al4V alloy ». Rapid Prototyping Journal 27, no 8 (25 août 2021) : 1523–37. http://dx.doi.org/10.1108/rpj-11-2020-0280.
Texte intégralHsu, Yu-Chuan, Zhenze Yang et Markus J. Buehler. « Generative design, manufacturing, and molecular modeling of 3D architected materials based on natural language input ». APL Materials 10, no 4 (1 avril 2022) : 041107. http://dx.doi.org/10.1063/5.0082338.
Texte intégralModir, Alireza, Arnaud Casterman et Ibrahim Tansel. « Detection of Anomalies in Additively Manufactured Metal Parts Using CNN and LSTM Networks ». Recent Progress in Materials 05, no 03 (26 juillet 2023) : 1–20. http://dx.doi.org/10.21926/rpm.2303028.
Texte intégralFerro, Paolo, Alberto Fabrizi, Hamada Elsayed et Gianpaolo Savio. « Multi-Material Additive Manufacturing : Creating IN718-AISI 316L Bimetallic Parts by 3D Printing, Debinding, and Sintering ». Sustainability 15, no 15 (2 août 2023) : 11911. http://dx.doi.org/10.3390/su151511911.
Texte intégralAl Ajmi, Haitham, Mohammed Bait-Suwailam, Mahmoud Masoud et Muhammad Shafiq. « EFFICIENCY ENHANCEMENT OF PHOTOVOLTAIC SOLAR CELLS USING METAMATERIALS ABSORBING SCREEN ». Journal of Engineering Research [TJER] 19, no 2 (5 avril 2023) : 85–94. http://dx.doi.org/10.53540/tjer.vol19iss2pp85-94.
Texte intégralEllebracht, Nathan C., Pratanu Roy, Thomas Moore, Aldair E. Gongora, Diego I. Oyarzun, Joshuah K. Stolaroff et Du T. Nguyen. « 3D printed triply periodic minimal surfaces as advanced structured packings for solvent-based CO2 capture ». Energy & ; Environmental Science, 2023. http://dx.doi.org/10.1039/d2ee03658d.
Texte intégralXiong, Yichen, et Bing Zhang. « A metallic 3D printed miniaturized circularly polarized log periodic Koch‐dipole array antenna ». International Journal of RF and Microwave Computer-Aided Engineering 31, no 7 (9 avril 2021). http://dx.doi.org/10.1002/mmce.22684.
Texte intégralMałachowska, A., Ł. Żrodowski, B. Morończyk, Ł. Maj, A. Kuś et T. Lampke. « Selective Laser Melting of Fe-Based Metallic Glasses With Different Degree of Plasticity ». Metallurgical and Materials Transactions A, 8 décembre 2022. http://dx.doi.org/10.1007/s11661-022-06913-w.
Texte intégralRomero, Pablo E., Juan M. Barrios, Esther Molero et Andres Bustillo. « Tuning 3D-printing parameters to produce vertical ultra-hydrophobic PETG parts with low ice adhesion : A food industry case study ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture, 6 juin 2023, 095440542311789. http://dx.doi.org/10.1177/09544054231178970.
Texte intégralLi, Tiantian, et Yaning Li. « Prediction of the Anisotropy of Chiral Mechanical Metamaterials via Micropolar Modeling ». Journal of Applied Mechanics, 24 août 2022, 1–21. http://dx.doi.org/10.1115/1.4055349.
Texte intégralWang, C., S. Chandra, X. P. Tan et S. B. Tor. « 3D printing of metallic micro-gears for micro-fluidic applications ». Journal of Micromechanics and Molecular Physics 06, no 02 (juin 2021). http://dx.doi.org/10.1142/s2424913021410022.
Texte intégralTang, Shiwei, Qiong He, Shiyi Xiao, Xueqin Huang et Lei Zhou. « Fractal plasmonic metamaterials : physics and applications ». Nanotechnology Reviews 4, no 3 (1 janvier 2015). http://dx.doi.org/10.1515/ntrev-2014-0025.
Texte intégralNoroozi, Reza, Farzad Tatar, Ali Zolfagharian, Roberto Brighenti, Mohammad Amin Shamekhi, Abbas Rastgoo, Amin Hadi et Mahdi Bodaghi. « Additively Manufactured Multi-Morphology Bone-like Porous Scaffolds : Experiments and Micro-Computed Tomography-Based Finite Element Modeling Approaches ». International Journal of Bioprinting 8, no 3 (7 mai 2022). http://dx.doi.org/10.18063/ijb.v8i3.556.
Texte intégralSankineni, Rakesh, et Y. Ravi Kumar. « Evaluation of energy absorption capabilities and mechanical properties in FDM printed PLA TPMS structures ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science, 18 août 2021, 095440622110395. http://dx.doi.org/10.1177/09544062211039530.
Texte intégralLiu, Bingyan, Shirong Liu, Vasanthan Devaraj, Yuxiang Yin, Yueqi Zhang, Jingui Ai, Yaochen Han et Jicheng Feng. « Metal 3D nanoprinting with coupled fields ». Nature Communications 14, no 1 (15 août 2023). http://dx.doi.org/10.1038/s41467-023-40577-3.
Texte intégralPederson, Mark R., et Warren E. Pickett. « Theoretical Investigation of Fluorinated and Hydrocenated Diamond <100> ; Filks ». MRS Proceedings 270 (1992). http://dx.doi.org/10.1557/proc-270-389.
Texte intégral