Bibliographies thématiques / Polymeric Solar Cells / Articles de revues

Articles de revues sur le sujet « Polymeric Solar Cells »

Pour voir les autres types de publications sur ce sujet consultez le lien suivant : Polymeric Solar Cells.
Auteur : Grafiati
Publié le 7 septembre 2023

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Polymeric Solar Cells ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.

1

Mdluli, Siyabonga B., Morongwa E. Ramoroka, Sodiq T. Yussuf, Kwena D. Modibane, Vivian S. John-Denk et Emmanuel I. Iwuoha. « π-Conjugated Polymers and Their Application in Organic and Hybrid Organic-Silicon Solar Cells ». Polymers 14, no 4 (13 février 2022) : 716. http://dx.doi.org/10.3390/polym14040716.

Texte intégral
Résumé :
The evolution and emergence of organic solar cells and hybrid organic-silicon heterojunction solar cells have been deemed as promising sustainable future technologies, owing to the use of π-conjugated polymers. In this regard, the scope of this review article presents a comprehensive summary of the applications of π-conjugated polymers as hole transporting layers (HTLs) or emitters in both organic solar cells and organic-silicon hybrid heterojunction solar cells. The different techniques used to synthesize these polymers are discussed in detail, including their electronic band structure and doping mechanisms. The general architecture and principle of operating heterojunction solar cells is addressed. In both discussed solar cell types, incorporation of π-conjugated polymers as HTLs have seen a dramatic increase in efficiencies attained by these devices, owing to the high transmittance in the visible to near-infrared region, reduced carrier recombination, high conductivity, and high hole mobilities possessed by the p-type polymeric materials. However, these cells suffer from long-term stability due to photo-oxidation and parasitic absorptions at the anode interface that results in total degradation of the polymeric p-type materials. Although great progress has been seen in the incorporation of conjugated polymers in the various solar cell types, there is still a long way to go for cells incorporating polymeric materials to realize commercialization and large-scale industrial production due to the shortcomings in the stability of the polymers. This review therefore discusses the progress in using polymeric materials as HTLs in organic solar cells and hybrid organic-silicon heterojunction solar cells with the intention to provide insight on the quest of producing highly efficient but less expensive solar cells.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Palewicz, Marcin, et Agnieszka Iwan. « Photovoltaic Phenomenon in Polymeric Thin Layer Solar Cells ». Current Physical Chemistry 1, no 1 (1 janvier 2011) : 27–54. http://dx.doi.org/10.2174/1877946811101010027.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Palewicz, Marcin, et Agnieszka Iwan. « Photovoltaic Phenomenon in Polymeric Thin Layer Solar Cells ». Current Physical Chemistrye 1, no 1 (1 janvier 2011) : 27–54. http://dx.doi.org/10.2174/1877947611101010027.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Lanzi, Massimiliano, Elisabetta Salatelli, Tiziana Benelli, Daniele Caretti, Loris Giorgini et Francesco Paolo Di-Nicola. « A regioregular polythiophene-fullerene for polymeric solar cells ». Journal of Applied Polymer Science 132, no 25 (10 mars 2015) : n/a. http://dx.doi.org/10.1002/app.42121.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Szindler, Magdalena M. « Polymeric Electrolyte Thin Film for Dye Sensitized Solar Cells Application ». Solid State Phenomena 293 (juillet 2019) : 73–81. http://dx.doi.org/10.4028/www.scientific.net/ssp.293.73.

Texte intégral
Résumé :
In this paper, the possibility of replacing liquid electrolyte in a dye sensitized solar cells with a thin film of conductive polymer material was investigated. Liquid electrolyte in the construction of dye sensitized solar cells leaks and evaporates and leads to corrosion of the electrode, which lowers the conversion efficiency of solar radiation to electricity. The research focuses on the appropriate doping of the PVDF-HFP polymer by potassium iodide to improve its electrical conductivity and the development of thin film deposition technology for use in solar cells. Changes in PVDF-HFP surface morphology were researched through increasing of the potassium iodide content measured by scanning electron microscope. The increased content of potassium iodide also led to increased electrical conductivity measured by the Keithley meter. In order to test the suitability of developed materials for application in the construction of photovoltaic cells, a series of dye-sensitized solar cells ITO/TiO2/dye/active layer/Al were prepared. The active layer is made from pure PVDF-HFP and doped with potassium iodide. As a reference solar cell, a standard dye sensitized solar cell with a liquid electrolyte and a counter electrode was also made. Keywords PVDF-HFP; Polyelectrolyte; Dye-sensitized solar cells
Styles APA, Harvard, Vancouver, ISO, etc.
6

Vlachopoulos, Nick, Michael Grätzel et Anders Hagfeldt. « Solid-state dye-sensitized solar cells using polymeric hole conductors ». RSC Advances 11, no 62 (2021) : 39570–81. http://dx.doi.org/10.1039/d1ra05911d.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Seco, Cristina Rodríguez, Anton Vidal-Ferran, Rajneesh Misra, Ganesh D. Sharma et Emilio Palomares. « Efficient Non-polymeric Heterojunctions in Ternary Organic Solar Cells ». ACS Applied Energy Materials 1, no 8 (6 juillet 2018) : 4203–10. http://dx.doi.org/10.1021/acsaem.8b00828.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Hahn, T., C. Saller, M. Weigl, I. Bauer, T. Unger, A. Köhler et P. Strohriegl. « Organic solar cells with crosslinked polymeric exciton blocking layer ». physica status solidi (a) 212, no 10 (10 juin 2015) : 2162–68. http://dx.doi.org/10.1002/pssa.201532040.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Uranbileg, Nergui, Chenglin Gao, Chunming Yang, Xichang Bao, Liangliang Han et Renqiang Yang. « Amorphous electron donors with controllable morphology for non-fullerene polymer solar cells ». Journal of Materials Chemistry C 7, no 35 (2019) : 10881–90. http://dx.doi.org/10.1039/c9tc02663k.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
10

Lim, Kyung-Geun, Soyeong Ahn, Young-Hoon Kim, Yabing Qi et Tae-Woo Lee. « Universal energy level tailoring of self-organized hole extraction layers in organic solar cells and organic–inorganic hybrid perovskite solar cells ». Energy & ; Environmental Science 9, no 3 (2016) : 932–39. http://dx.doi.org/10.1039/c5ee03560k.

Texte intégral
Résumé :
Tailoring the interface energetics between a polymeric hole extraction layer (HEL) and a photoactive layer (PAL) in organic photovoltaics (OPVs) and organic–inorganic hybrid perovskite solar cells (PrSCs) is very important to maximize open circuit voltage (Voc), power conversion efficiency (PCE), and device lifetime.
Styles APA, Harvard, Vancouver, ISO, etc.
11

Liu, Peng, James M. Gardner et Lars Kloo. « Solution processable, cross-linked sulfur polymers as solid electrolytes in dye-sensitized solar cells ». Chemical Communications 51, no 78 (2015) : 14660–62. http://dx.doi.org/10.1039/c5cc04822b.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
12

Guo, Yunlong, Wataru Sato, Kento Inoue, Weifeng Zhang, Gui Yu et Eiichi Nakamura. « n-Type doping for efficient polymeric electron-transporting layers in perovskite solar cells ». Journal of Materials Chemistry A 4, no 48 (2016) : 18852–56. http://dx.doi.org/10.1039/c6ta08526a.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
13

Thao, Tran Thi, Do Ngoc Chung, Nguyen Nang Dinh et Vo Van Truong. « Photoluminescence Quenching of Nanocomposite Materials Used for Organic Solar Cells ». Communications in Physics 24, no 3S1 (7 novembre 2014) : 22–28. http://dx.doi.org/10.15625/0868-3166/24/3s1/5073.

Texte intégral
Résumé :
In this work, we have studied the photoluminescence (PL) quenching of two polymeric composites, poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and poly(3-hexylthiophene) (P3HT) in presence of nc-TiO\(_{2}\) particles by PL- spectroscopy. PL quenching values are 19.2\(\text{\%}\) and 45.5\(\text{\%}\), for MEH-PPV+nc-TiO\(_{2}\) and P3HT+nc-TiO$_{2}$, respectively. The obtained results on the relationship of PL quenching and photoelectrical efficiency (PCE) of an OSC showed that the quenching coefficient of a semiconducting polymer can be considered as apreliminarycriterion for choosing an appropriate polymeric composite being used for OSC preparation. Under illumination of solar energyof 56 mW/cm\(^{2}\), P3HT+TiO\(_{2}\) based OSC possess FF, V$_{OC}$, J$_{SC}$ and PCE of 0.64, 0.243 V, 1.43 mA/cm\(^{2}\) and 0.45\(\text{\%}\), respectively.
Styles APA, Harvard, Vancouver, ISO, etc.
14

Chen, Lung-Chien. « Organic and Polymeric Thin-Film Materials for Solar Cells : A New Open Special Issue in Materials ». Materials 15, no 19 (26 septembre 2022) : 6664. http://dx.doi.org/10.3390/ma15196664.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
15

Liu, Chang, Kai Wang, Xiong Gong et Alan J. Heeger. « Low bandgap semiconducting polymers for polymeric photovoltaics ». Chemical Society Reviews 45, no 17 (2016) : 4825–46. http://dx.doi.org/10.1039/c5cs00650c.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
16

Hennache, A. « Polymeric Solar Cells Efficiency Increase Using Doped Conjugated Polymer Nanoparticles ». British Journal of Applied Science & ; Technology 4, no 4 (10 janvier 2014) : 604–16. http://dx.doi.org/10.9734/bjast/2014/4249.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
17

Ye, Huaiying, Wen Li et Weishi Li. « Progress in Polymeric Electron-Donating Materials for Organic Solar Cells ». Chinese Journal of Organic Chemistry 32, no 2 (2012) : 266. http://dx.doi.org/10.6023/cjoc1104062.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
18

Zheng, Lingling, Yingzhuang Ma, Lixin Xiao, Fengyan Zhang, Yuanhao Wang et Hongxing Yang. « Water-Soluble Polymeric Interfacial Material for Planar Perovskite Solar Cells ». ACS Applied Materials & ; Interfaces 9, no 16 (11 avril 2017) : 14129–35. http://dx.doi.org/10.1021/acsami.7b00576.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
19

Liu, Feng, Zachariah A. Page, Volodimyr V. Duzhko, Thomas P. Russell et Todd Emrick. « Conjugated Polymeric Zwitterions as Efficient Interlayers in Organic Solar Cells ». Advanced Materials 25, no 47 (18 septembre 2013) : 6868–73. http://dx.doi.org/10.1002/adma.201302477.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
20

Ma’alinia, A., H. Asgari Moghaddam, E. Nouri et M. R. Mohammadi. « Long-term stability of dye-sensitized solar cells using a facile gel polymer electrolyte ». New Journal of Chemistry 42, no 16 (2018) : 13256–62. http://dx.doi.org/10.1039/c8nj02157k.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
21

Akbar, Zico Alaia, Jae-Seon Lee, Jinhyeon Kang, Han-Ik Joh, Sungho Lee et Sung-Yeon Jang. « FTO-free counter electrodes for dye-sensitized solar cells using carbon nanosheets synthesised from a polymeric carbon source ». Phys. Chem. Chem. Phys. 16, no 33 (2014) : 17595–602. http://dx.doi.org/10.1039/c4cp01913j.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
22

Pedroso Silva Santos, Bianca, Arthur de Castro Ribeiro, Jose Geraldo de Melo Furtado et Maria de Fátima Vieira Marques. « Synthesis and Characterization of Conductive Terpolymer for Solar Cell Application ». Journal of Aerospace Technology and Management, no 1 (21 janvier 2020) : 41–44. http://dx.doi.org/10.5028/jatm.etmq.07.

Texte intégral
Résumé :
Polymeric solar cells (PSCs) are a promising alternative for harnessing solar energy and producing clean and renewable energy. In the present work, a new photovoltaic polymer was synthesized to be applied as an electron donor in PSCs. The conjugated polymer showed high solubility. The optical and electronic properties were investigated in which it was possible to observe wide absorption band and bandgap indicating that it is a promising material for application in solar cells.
Styles APA, Harvard, Vancouver, ISO, etc.
23

Tsai, Chang-Hung, Nan Li, Chia-Chen Lee, Hung-Chin Wu, Zonglong Zhu, Liduo Wang, Wen-Chang Chen, He Yan et Chu-Chen Chueh. « Efficient and UV-stable perovskite solar cells enabled by side chain-engineered polymeric hole-transporting layers ». Journal of Materials Chemistry A 6, no 27 (2018) : 12999–3004. http://dx.doi.org/10.1039/c8ta03608j.

Texte intégral
Résumé :
Biaxially-extended octithiophene-based conjugated polymers are demonstrated as effective polymeric hole-transporting layers to simultaneously enhance efficiency and UV-photostability of perovskite solar cells.
Styles APA, Harvard, Vancouver, ISO, etc.
24

Pan, Xuexue, Wentao Xiong, Tao Liu, Xiaobo Sun, Lijun Huo, Donghui Wei, Mingming Yu, Minfang Han et Yanming Sun. « Influence of 2,2-bithiophene and thieno[3,2-b] thiophene units on the photovoltaic performance of benzodithiophene-based wide-bandgap polymers ». Journal of Materials Chemistry C 5, no 18 (2017) : 4471–79. http://dx.doi.org/10.1039/c7tc00720e.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
25

Lee, You-Sun, Ji Young Lee, Su-Mi Bang, Bogyu Lim, Jaechol Lee et Seok-In Na. « A feasible random copolymer approach for high-efficiency polymeric photovoltaic cells ». Journal of Materials Chemistry A 4, no 29 (2016) : 11439–45. http://dx.doi.org/10.1039/c6ta04920f.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
26

Wang, Shuangjie, Bowen Yang, Jian Han, Ziwei He, Tongtong Li, Qi Cao, Jiabao Yang et al. « Polymeric room-temperature molten salt as a multifunctional additive toward highly efficient and stable inverted planar perovskite solar cells ». Energy & ; Environmental Science 13, no 12 (2020) : 5068–79. http://dx.doi.org/10.1039/d0ee02043e.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
27

Azovskyi, V. A., V. M. Yashchuk, G. V. Bulavko et A. A. Ishchenko. « Some Problems in Designing a Luminescence Converter for Si Solar Cells ». Ukrainian Journal of Physics 65, no 6 (9 juin 2020) : 476. http://dx.doi.org/10.15407/ujpe65.6.476.

Texte intégral
Résumé :
Aromatic polymer composites are characterized by the high absorption and luminescence excitation in the short-wave interval of the solar radiation spectrum from about 200 nm. Therefore, they can be used to enhance the spectral sensitivity of semiconductor solar cells, including silicon-based ones, at short waves. When such a composite absorbs light, there arise Frenkel excitons in it, which are responsible for the transfer of the excitation energy to molecular traps. The latter emit light in the spectral region of maximum solar cell sensitivity. The results obtained demonstrate a possibility to develop a luminescence converter on the basis of a polymeric composite, thus increasing the photocurrent generated by Si-based solar cells.
Styles APA, Harvard, Vancouver, ISO, etc.
28

Aizawa, Naoya, Canek Fuentes-Hernandez, Vladimir A. Kolesov, Talha M. Khan, Junji Kido et Bernard Kippelen. « Simultaneous cross-linking and p-doping of a polymeric semiconductor film by immersion into a phosphomolybdic acid solution for use in organic solar cells ». Chemical Communications 52, no 19 (2016) : 3825–27. http://dx.doi.org/10.1039/c6cc01022a.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
29

Zhang, Chun-Hui, Fengyuan Lin, Wei Huang, Jingming Xin, Jiang Wang, Zhichao Lin, Wei Ma, Tingbin Yang, Jiangbin Xia et Yongye Liang. « Methyl functionalization on conjugated side chains for polymer solar cells processed from non-chlorinated solvents ». Journal of Materials Chemistry C 8, no 33 (2020) : 11532–39. http://dx.doi.org/10.1039/d0tc02032j.

Texte intégral
Résumé :
Methyl functionalization on conjugated thiophene side chains is developed as an effective fine-tuning approach for polymeric donors, affording substantial efficiency improvement for polymer solar cells processed from non-chlorinated solvents.
Styles APA, Harvard, Vancouver, ISO, etc.
30

Chen, Weikang, Deyao Jiang, Renai Chen, Sheng Li et Thomas George. « Intrinsic Delocalization during the Decay of Excitons in Polymeric Solar Cells ». Polymers 8, no 12 (30 novembre 2016) : 414. http://dx.doi.org/10.3390/polym8120414.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
31

Jeong, Jaehoon, Eunjoo Kwak, Jooyeok Seo, Hwajeong Kim et Youngkyoo Kim. « Hybrid Solar Cells With Polymeric Bulk Heterojunction Layers Containing Inorganic Nanoparticles ». IEEE Journal of Photovoltaics 6, no 4 (juillet 2016) : 924–29. http://dx.doi.org/10.1109/jphotov.2016.2553785.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
32

Changneng, Zhang, Wang Mingtai, Li Fang, Kong Mingguang, Guo Li, Xu Weiwei, Zhu Xiaoguang et Wang Kongjia. « A Polymeric/Inorganic Nanocomposite for Solid-State Dye-Sensitized Solar Cells ». Plasma Science and Technology 7, no 4 (août 2005) : 2962–64. http://dx.doi.org/10.1088/1009-0630/7/4/021.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
33

Kumar, Rajesh, Ajendra K. Sharma, Virinder S. Parmar, Arthur C. Watterson, Kethinni G. Chittibabu, Jayant Kumar et Lynne A. Samuelson. « Flexible, Dye-Sensitized Nanocrystalline Solar Cells Employing Biocatalytically Synthesized Polymeric Electrolytes ». Chemistry of Materials 16, no 23 (novembre 2004) : 4841–46. http://dx.doi.org/10.1021/cm0496568.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
34

Chandrasekharan, Ajeesh, Hui Jin, Martin Stolterfoht, Eliot Gann, Christopher R. McNeill, Mike Hambsch et Paul L. Burn. « 9,9′-Bifluorenylidene-diketopyrrolopyrrole donors for non-polymeric solution processed solar cells ». Synthetic Metals 250 (avril 2019) : 79–87. http://dx.doi.org/10.1016/j.synthmet.2019.02.015.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
35

A., Venkateswararao, Shun-Wei Liu et Ken-Tsung Wong. « Organic polymeric and small molecular electron acceptors for organic solar cells ». Materials Science and Engineering : R : Reports 124 (février 2018) : 1–57. http://dx.doi.org/10.1016/j.mser.2018.01.001.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
36

Yusli, M. N., T. Way Yun et K. Sulaiman. « Solvent effect on the thin film formation of polymeric solar cells ». Materials Letters 63, no 30 (décembre 2009) : 2691–94. http://dx.doi.org/10.1016/j.matlet.2009.09.044.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
37

Zhou, Yinhua, Canek Fuentes-Hernandez, Jae Won Shim, Talha M. Khan et Bernard Kippelen. « High performance polymeric charge recombination layer for organic tandem solar cells ». Energy & ; Environmental Science 5, no 12 (2012) : 9827. http://dx.doi.org/10.1039/c2ee23294d.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
38

Dang, Minh Trung, Guillaume Wantz, Habiba Bejbouji, Mathieu Urien, Olivier J. Dautel, Laurence Vignau et Lionel Hirsch. « Polymeric solar cells based on P3HT:PCBM : Role of the casting solvent ». Solar Energy Materials and Solar Cells 95, no 12 (décembre 2011) : 3408–18. http://dx.doi.org/10.1016/j.solmat.2011.07.039.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
39

Kang, Jin Soo, Jin Kim, Jae-Yup Kim, Myeong Jae Lee, Jiho Kang, Yoon Jun Son, Juwon Jeong, Sun Ha Park, Min Jae Ko et Yung-Eun Sung. « Highly Efficient Bifacial Dye-Sensitized Solar Cells Employing Polymeric Counter Electrodes ». ACS Applied Materials & ; Interfaces 10, no 10 (27 février 2018) : 8611–20. http://dx.doi.org/10.1021/acsami.7b17815.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
40

Radbeh, Roshanak, Emilien Parbaile, Mohamad Chakaroun, Bernard Ratier, Matt Aldissi et André Moliton. « Enhanced efficiency of polymeric solar cells via alignment of carbon nanotubes ». Polymer International 59, no 11 (13 septembre 2010) : 1514–19. http://dx.doi.org/10.1002/pi.2916.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
41

Marin, Veronica, Elisabeth Holder et Ulrich S. Schubert. « Polymeric ruthenium bipyridine complexes : New potential materials for polymer solar cells ». Journal of Polymer Science Part A : Polymer Chemistry 42, no 2 (2003) : 374–85. http://dx.doi.org/10.1002/pola.11024.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
42

Ulbricht, R., X. Jiang, S. Lee, K. Inoue, M. Zhang, S. Fang, R. Baughman et A. Zakhidov. « Polymeric solar cells with oriented and strong transparent carbon nanotube anode ». physica status solidi (b) 243, no 13 (novembre 2006) : 3528–32. http://dx.doi.org/10.1002/pssb.200669181.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
43

Völker, Sebastian F., Shinobu Uemura, Moritz Limpinsel, Markus Mingebach, Carsten Deibel, Vladimir Dyakonov et Christoph Lambert. « Polymeric Squaraine Dyes as Electron Donors in Bulk Heterojunction Solar Cells ». Macromolecular Chemistry and Physics 211, no 10 (11 mai 2010) : 1098–108. http://dx.doi.org/10.1002/macp.200900670.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
44

Kaienburg, Pascal, Benjamin Klingebiel et Thomas Kirchartz. « Spin-coated planar Sb2S3 hybrid solar cells approaching 5% efficiency ». Beilstein Journal of Nanotechnology 9 (8 août 2018) : 2114–24. http://dx.doi.org/10.3762/bjnano.9.200.

Texte intégral
Résumé :
Antimony sulfide solar cells have demonstrated an efficiency exceeding 7% when assembled in an extremely thin absorber configuration deposited via chemical bath deposition. More recently, less complex, planar geometries were obtained from simple spin-coating approaches, but the device efficiency still lags behind. We compare two processing routes based on different precursors reported in the literature. By studying the film morphology, sub-bandgap absorption and solar cell performance, improved annealing procedures are found and the crystallization temperature is shown to be critical. In order to determine the optimized processing conditions, the role of the polymeric hole transport material is discussed. The efficiency of our best solar cells exceeds previous reports for each processing route, and our champion device displays one of the highest efficiencies reported for planar antimony sulfide solar cells.
Styles APA, Harvard, Vancouver, ISO, etc.
45

Matoetoe, Mangaka. « A Review of Dye Incorporated Conducting Polymers Application as Sensors and in Solar Cells ». Materials Science Forum 657 (juillet 2010) : 208–30. http://dx.doi.org/10.4028/www.scientific.net/msf.657.208.

Texte intégral
Résumé :
Dye doped polymers (DCPs) has a wide application based on their optical and electrochemical properties. Dye sensitisation of conducting polymeric materials has gained a wide theoretical interest and practical application in sensors and solar cell technology. This review gives a broad summary on synthesis, the effect of the presence of dye in the polymer (properties, structure and conductivity), application in sensors and dye sensitised solar cells. Different sensing modes are also discussed as well as the effects of post polymer modification with dyes in sensors. In solar cells, the role of DCPs in light harvesting is summarised using examples. Finally, perspectives and the advantages of dye modification or sensitisation of polymers in sensors and solar cells are included.
Styles APA, Harvard, Vancouver, ISO, etc.
46

Kim, Guan-Woo, Gyeongho Kang, Jinseck Kim, Gang-Young Lee, Hong Il Kim, Limok Pyeon, Jaechol Lee et Taiho Park. « Dopant-free polymeric hole transport materials for highly efficient and stable perovskite solar cells ». Energy & ; Environmental Science 9, no 7 (2016) : 2326–33. http://dx.doi.org/10.1039/c6ee00709k.

Texte intégral
Résumé :
A dopant–free polymeric hole transport material (HTM), RCP, based on benzo[1,2-b:4,5:b′]dithiophene and 2,1,3-benzothiadiazole exhibited a high efficiency of 17.3% in a perovskite solar cell and maintained its initial efficiency for over 1400 hours.
Styles APA, Harvard, Vancouver, ISO, etc.
47

Gnida, Paweł, Muhammad Faisal Amin, Agnieszka Katarzyna Pająk et Bożena Jarząbek. « Polymers in High-Efficiency Solar Cells : The Latest Reports ». Polymers 14, no 10 (11 mai 2022) : 1946. http://dx.doi.org/10.3390/polym14101946.

Texte intégral
Résumé :
Third-generation solar cells, including dye-sensitized solar cells, bulk-heterojunction solar cells, and perovskite solar cells, are being intensively researched to obtain high efficiencies in converting solar energy into electricity. However, it is also important to note their stability over time and the devices’ thermal or operating temperature range. Today’s widely used polymeric materials are also used at various stages of the preparation of the complete device—it is worth mentioning that in dye-sensitized solar cells, suitable polymers can be used as flexible substrates counter-electrodes, gel electrolytes, and even dyes. In the case of bulk-heterojunction solar cells, they are used primarily as donor materials; however, there are reports in the literature of their use as acceptors. In perovskite devices, they are used as additives to improve the morphology of the perovskite, mainly as hole transport materials and also as additives to electron transport layers. Polymers, thanks to their numerous advantages, such as the possibility of practically any modification of their chemical structure and thus their physical and chemical properties, are increasingly used in devices that convert solar radiation into electrical energy, which is presented in this paper.
Styles APA, Harvard, Vancouver, ISO, etc.
48

Fuentes Pineda, Rosinda, Benjamin R. M. Lake, Joel Troughton, Irene Sanchez-Molina, Oleg Chepelin, Saif A. Haque, Trystan Watson, Michael P. Shaver et Neil Robertson. « Correction : Polymeric hole-transport materials with side-chain redox-active groups for perovskite solar cells with good reproducibility ». Physical Chemistry Chemical Physics 20, no 46 (2018) : 29567. http://dx.doi.org/10.1039/c8cp91904f.

Texte intégral
Résumé :
Correction for ‘Polymeric hole-transport materials with side-chain redox-active groups for perovskite solar cells with good reproducibility’ by Rosinda Fuentes Pineda et al., Phys. Chem. Chem. Phys., 2018, 20, 25738–25745.
Styles APA, Harvard, Vancouver, ISO, etc.
49

Cao, Yang, Yunlong Li, Thomas Morrissey, Brian Lam, Brian O. Patrick, David J. Dvorak, Zhicheng Xia, Timothy L. Kelly et Curtis P. Berlinguette. « Dopant-free molecular hole transport material that mediates a 20% power conversion efficiency in a perovskite solar cell ». Energy & ; Environmental Science 12, no 12 (2019) : 3502–7. http://dx.doi.org/10.1039/c9ee02983d.

Texte intégral
Résumé :
Organic molecular hole-transport materials (HTMs) are appealing for the scalable manufacture of perovskite solar cells (PSCs) because they are easier to reproducibly prepare in high purity than polymeric and inorganic HTMs.
Styles APA, Harvard, Vancouver, ISO, etc.
50

Heo, Jin Hyuck, Muhammad Jahandar, Sang-Jin Moon, Chang Eun Song et Sang Hyuk Im. « Inverted CH3NH3PbI3 perovskite hybrid solar cells with improved flexibility by introducing a polymeric electron conductor ». Journal of Materials Chemistry C 5, no 11 (2017) : 2883–91. http://dx.doi.org/10.1039/c6tc05081f.

Texte intégral
Résumé :
Inverted-type CH3NH3PbI3 flexible perovskite solar cells with improved flexibility were demonstrated by incorporating a polymeric electron transporting material (PNDI-2T) into small molecular electron transporting material (PCBM).
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Polymeric Solar Cells » pour d’autres types de sources :
Thèses Livres
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie