Articles de revues sur le sujet « Plastic slip »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les 50 meilleurs articles de revues pour votre recherche sur le sujet « Plastic slip ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Parcourez les articles de revues sur diverses disciplines et organisez correctement votre bibliographie.
Schmalzer, Andrew M., et A. Jeffrey Giacomin. « Die drool theory ». Journal of Polymer Engineering 33, no 1 (1 février 2013) : 1–18. http://dx.doi.org/10.1515/polyeng-2012-0044.
Texte intégralKawano, Yoshiki, Tsuyoshi Mayama, Ryouji Kondou et Tetsuya Ohashi. « Crystal Plasticity Analysis of Change in Active Slip Systems of α-Phase of Ti-6Al-4V Alloy under Cyclic Loading ». Key Engineering Materials 725 (décembre 2016) : 183–88. http://dx.doi.org/10.4028/www.scientific.net/kem.725.183.
Texte intégralZhu, Xiao Hua, Yu Wang, Fu Cheng Deng, Li Ping Tang et Hua Tong. « Optimal Design of Slip Dog Based on the Elasticoplasticity Contact Analysis ». Applied Mechanics and Materials 34-35 (octobre 2010) : 1718–23. http://dx.doi.org/10.4028/www.scientific.net/amm.34-35.1718.
Texte intégralYokogawa, Toshiya, Sachi Niki, Junko Maekawa, Masahiko Aoki et Masaki Fujikane. « Dislocation Formation via an r-Plane Slip Initiated by Plastic Deformation during Nano-Indentation of a High Quality Bulk GaN Surface ». MRS Advances 1, no 58 (2016) : 3847–52. http://dx.doi.org/10.1557/adv.2016.165.
Texte intégralZhu, Eryu, Teng Li, Haoran Liu, Chunqi Zhu, Lei Liu, Yuanyuan Tian, Yujie Li et Wei Yang. « Bond-Slip Behavior between Plastic Bellow and Concrete ». Advances in Materials Science and Engineering 2022 (14 juin 2022) : 1–16. http://dx.doi.org/10.1155/2022/2450503.
Texte intégralLiu, Yun Xi, Wei Chen, Zhi Qiang Li, Liang Liang Liu et Dong Liu. « In Situ Observation on the Deformation Behavior of Primary α-Ti in a Textured Ti-6Al-4V ». Materials Science Forum 993 (mai 2020) : 365–73. http://dx.doi.org/10.4028/www.scientific.net/msf.993.365.
Texte intégralAndo, Shinji, Masayuki Tsushida et Hiromoto Kitahara. « Plastic Deformation Behavior in Magnesium Alloy Single Crystals ». Materials Science Forum 706-709 (janvier 2012) : 1122–27. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.1122.
Texte intégralOhashi, Tetsuya, Michihiro Sato et Yuhki Shimazu. « Evaluation of Plastic Work Density, Strain Energy and Slip Multiplication Intensity at Some Typical Grain Boundary Triple Junctions ». Materials Science Forum 654-656 (juin 2010) : 1283–86. http://dx.doi.org/10.4028/www.scientific.net/msf.654-656.1283.
Texte intégralGerdeen, J. C., W. W. Predebon, P. M. Schwab et A. Shah. « Elastic-Plastic Analysis of Directionally Solidified Lamellar Eutectic Composites ». Journal of Engineering Materials and Technology 109, no 1 (1 janvier 1987) : 53–58. http://dx.doi.org/10.1115/1.3225933.
Texte intégralLiu, Conghui, Rhys Thomas, João Quinta da Fonseca et Michael Preuss. « Early slip activity and fatigue crack initiation of a near alpha titanium alloy ». MATEC Web of Conferences 321 (2020) : 11040. http://dx.doi.org/10.1051/matecconf/202032111040.
Texte intégralAnguige, Keith, et Patrick W. Dondl. « Relaxation of the Non-Convex, Incremental Energy-Minimization Problem in Single-Slip Strain-Gradient Plasticity ». Key Engineering Materials 651-653 (juillet 2015) : 963–68. http://dx.doi.org/10.4028/www.scientific.net/kem.651-653.963.
Texte intégralOrtiz, M. « Plastic Yielding as a Phase Transition ». Journal of Applied Mechanics 66, no 2 (1 juin 1999) : 289–98. http://dx.doi.org/10.1115/1.2791048.
Texte intégralSung, T. H., J. C. Huang, J. H. Hsu, S. R. Jian et T. G. Nieh. « Yielding and plastic slip in ZnO ». Applied Physics Letters 100, no 21 (21 mai 2012) : 211903. http://dx.doi.org/10.1063/1.4720169.
Texte intégralHuang, Houxu, Jie Li et Jiuqi Wei. « Analytical Solution of Displacements Around Circular Openings in Generalized Hoek-Brown Rocks ». Journal of Theoretical and Applied Mechanics 47, no 3 (26 septembre 2017) : 81–95. http://dx.doi.org/10.1515/jtam-2017-0015.
Texte intégralHayroyan, S. G., et H. S. Hayroyan. « Methods for determining shear resistance by a system of cracks and old slip surfaces with the purpose to evaluate the stability of landslides ». Journal of Physics : Conference Series 2231, no 1 (1 avril 2022) : 012017. http://dx.doi.org/10.1088/1742-6596/2231/1/012017.
Texte intégralHayroyan, S. G., et H. S. Hayroyan. « Methods for determining shear resistance by a system of cracks and old slip surfaces with the purpose to evaluate the stability of landslides ». Journal of Physics : Conference Series 2231, no 1 (1 avril 2022) : 012017. http://dx.doi.org/10.1088/1742-6596/2231/1/012017.
Texte intégralYu, Qin, Jian Wang et Yanyao Jiang. « Inverse Slip Accompanying Twinning and Detwinning during Cyclic Loading of Magnesium Single Crystal ». Journal of Materials 2013 (17 septembre 2013) : 1–8. http://dx.doi.org/10.1155/2013/903786.
Texte intégralLian, Yong, Li Hu, Tao Zhou, Mingbo Yang et Jin Zhang. « Numerical Investigation of Secondary Deformation Mechanisms on Plastic Deformation of AZ31 Magnesium Alloy Using Viscoplastic Self-Consistent Model ». Metals 9, no 1 (5 janvier 2019) : 41. http://dx.doi.org/10.3390/met9010041.
Texte intégralEterashvili, Tamaz, T. Dzigrashvili et M. Vardosanidze. « Initial Aspects of Low-Cycle Fatigue Fracture of Martensitic Steels ». Key Engineering Materials 348-349 (septembre 2007) : 385–88. http://dx.doi.org/10.4028/www.scientific.net/kem.348-349.385.
Texte intégralMan, Jiří, Anja Weidner, Petr Klapetek et Jaroslav Polák. « Slip Activity of Persistent Slip Bands in early Stages of Fatigue Life of Austenitic 316L Steel ». Key Engineering Materials 592-593 (novembre 2013) : 785–88. http://dx.doi.org/10.4028/www.scientific.net/kem.592-593.785.
Texte intégralZaiser,, M., et E. C. Aifantis,. « Avalanches and Slip Patterning in Plastic Deformation ». Journal of the Mechanical Behavior of Materials 14, no 4-5 (septembre 2003) : 255–70. http://dx.doi.org/10.1515/jmbm.2003.14.4-5.255.
Texte intégralMuñoz, A., A. Domínguez-Rodríguez et J. Castaing. « Slip Systems and plastic anisotropy in CaF2 ». Journal of Materials Science 29, no 23 (décembre 1994) : 6207–11. http://dx.doi.org/10.1007/bf00354561.
Texte intégralTabatabaei Mirhosseini, Ramin, Ehsan Araghizadeh et Soroush Rashidi. « Approximate Relationship for the Bond-Slip Using a Concrete Damage-Plastic Model ». Advances in Materials Science and Engineering 2023 (17 avril 2023) : 1–15. http://dx.doi.org/10.1155/2023/1320192.
Texte intégralUehara, Takuya. « An Atomistic Study on the Slip Deformation Mechanism of Crystalline Materials Using a Weak-Plane Model ». Applied Mechanics and Materials 197 (septembre 2012) : 321–26. http://dx.doi.org/10.4028/www.scientific.net/amm.197.321.
Texte intégralSerre, Ingrid, Daniel Salazar et Jean Bernard Vogt. « Plastic Deformation Quantified by Atomic Force Microscopy Measurements for Duplex Stainless Steel under Monotonic and Cyclic Loading ». Applied Mechanics and Materials 13-14 (juillet 2008) : 163–72. http://dx.doi.org/10.4028/www.scientific.net/amm.13-14.163.
Texte intégralPolák, Jaroslav, et Jiří Man. « Cyclic Slip Localization and Crack Initiation in Crystalline Materials ». Advanced Materials Research 891-892 (mars 2014) : 452–57. http://dx.doi.org/10.4028/www.scientific.net/amr.891-892.452.
Texte intégralEterashvili, Tamaz, T. Dzigrashvili et M. Vardosanidze. « TEM Study of Microstructure Changes, Formation and Distribution of Slip Bands in Austenitic Steels after Low-Cycle Fatigue (LCF) Deformation - II ». Key Engineering Materials 665 (septembre 2015) : 141–44. http://dx.doi.org/10.4028/www.scientific.net/kem.665.141.
Texte intégralXu, Biqiang, et Yanyao Jiang. « Elastic-Plastic Finite Element Analysis of Partial Slip Rolling Contact ». Journal of Tribology 124, no 1 (26 mars 2001) : 20–26. http://dx.doi.org/10.1115/1.1395630.
Texte intégralXu, Shuang, et Ya Fang Guo. « Effects of Strain Rate on the Tensile Deformation of Single-Crystal Copper Films ». Materials Science Forum 675-677 (février 2011) : 671–73. http://dx.doi.org/10.4028/www.scientific.net/msf.675-677.671.
Texte intégralMatsugaki, Aira, Gento Aramoto, Takuya Ishimoto et Takayoshi Nakano. « Control of Osteoblastic Cell Behavior by Surface Topography Introduced by Plastic Deformation of Ti Single Crystal with h.c.p. Structure ». Materials Science Forum 706-709 (janvier 2012) : 549–52. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.549.
Texte intégralMatsuno, Hiroshi. « Characteristics of Complementary Plastic Energy Produced by Hysteresis Curves and Analyses of Microstructures in Fatigued Metals ». Key Engineering Materials 340-341 (juin 2007) : 513–18. http://dx.doi.org/10.4028/www.scientific.net/kem.340-341.513.
Texte intégralZhang, Xin Ming, et Yang Xiao. « Fracture Mechanism Analysis of Mg-9Gd-4Y-0.6Zr Alloy ». Materials Science Forum 546-549 (mai 2007) : 261–66. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.261.
Texte intégralSetz, Luiz Fernando Grespan, Laís Koshimizu, Sonia Regina Homem de Mello-Castanho et Márcio Raymundo Morelli. « Rheological Analysis of Ceramics Suspensions with High Solids Loading ». Materials Science Forum 727-728 (août 2012) : 646–51. http://dx.doi.org/10.4028/www.scientific.net/msf.727-728.646.
Texte intégralPolák, Jaroslav. « Role of Persistent Slip Bands and Persistent Slip Markings in Fatigue Crack Initiation in Polycrystals ». Crystals 13, no 2 (25 janvier 2023) : 220. http://dx.doi.org/10.3390/cryst13020220.
Texte intégralCelik, Alptekin, Fabian Willems, Mustafa Tüzün, Svetlana Marinova, Johannes Heyn, Markus Fiedler et Christian Bonten. « Compounding, Rheology and Numerical Simulation of Highly Filled Graphite Compounds for Potential Fuel Cell Applications ». Polymers 15, no 12 (6 juin 2023) : 2589. http://dx.doi.org/10.3390/polym15122589.
Texte intégralWang, Hongbo, Bowen Huang, Wangyu Hu et Jian Huang. « Studying Plastic Deformation Mechanism in β-Ti-Nb Alloys by Molecular Dynamic Simulations ». Metals 14, no 3 (10 mars 2024) : 318. http://dx.doi.org/10.3390/met14030318.
Texte intégralZeng, Bo, Hongwei Liu, Hongzhou Song, Zhe Zhao, Shaowei Fan, Li Jiang, Yuan Liu et al. « Design and slip prevention control of a multi-sensory anthropomorphic prosthetic hand ». Industrial Robot : the international journal of robotics research and application 49, no 2 (30 décembre 2021) : 289–300. http://dx.doi.org/10.1108/ir-07-2021-0133.
Texte intégralCarrez, Philippe, Patrick Cordier, David Mainprice et Andrea Tommasi. « Slip systems and plastic shear anisotropy in Mg2SiO4 ringwoodite : insights from numerical modelling ». European Journal of Mineralogy 18, no 2 (11 mai 2006) : 149–60. http://dx.doi.org/10.1127/0935-1221/2006/0018-0149.
Texte intégralWang, Jiwei, Bin Shao, Debin Shan, Bin Guo et Yingying Zong. « The Effect of Hydrogen on Plastic Anisotropy of Mg and α-Ti/Zr from First-Principles Calculations ». Materials 16, no 8 (11 avril 2023) : 3016. http://dx.doi.org/10.3390/ma16083016.
Texte intégralFu, Ge Yan, et Shi Hong Shi. « Mechanism Research of Low-Stress Threshold of Plastic Accumulation under Super-Low Repeated Impact Stress ». Key Engineering Materials 464 (janvier 2011) : 605–8. http://dx.doi.org/10.4028/www.scientific.net/kem.464.605.
Texte intégralZeng, Xiang Guo, Qing Yuan Wang, Jing Hong Fan, Zhan Hua Gao et Xiang He Peng. « A Cyclic Stress-Strain Constitutive Model for Polycrystalline Magnesium Alloy and its Application ». Materials Science Forum 546-549 (mai 2007) : 81–88. http://dx.doi.org/10.4028/www.scientific.net/msf.546-549.81.
Texte intégralAlharbi, Hamad F., Monis Luqman, Ehab El-Danaf et Nabeel H. Alharthi. « Experimental and Numerical Study of Texture Evolution and Anisotropic Plastic Deformation of Pure Magnesium under Various Strain Paths ». Advances in Materials Science and Engineering 2018 (2018) : 1–12. http://dx.doi.org/10.1155/2018/2867281.
Texte intégralJang, Min Gyu, Chul Hee Lee et Seung Bok Choi. « Stick-Slip Compensation of Micro-Positioning Using Elastic-Plastic Static Friction Model ». Advanced Materials Research 47-50 (juin 2008) : 246–49. http://dx.doi.org/10.4028/www.scientific.net/amr.47-50.246.
Texte intégralAbe, Takeji. « On the Relation between R-Value of a Grain and the Operating Slip Systems of the Grain ». Key Engineering Materials 626 (août 2014) : 566–69. http://dx.doi.org/10.4028/www.scientific.net/kem.626.566.
Texte intégralLance, Gary L., et S. Nemat-Nasser. « Slip-induced plastic flow of geomaterials and crystals ». Mechanics of Materials 5, no 1 (mars 1986) : 1–11. http://dx.doi.org/10.1016/0167-6636(86)90011-6.
Texte intégralLance, Gary L., et S. Nemat-Nasser. « Slip-induced plastic flow of geomaterials and crystals ». Mechanics of Materials 6, no 2 (juin 1987) : 175. http://dx.doi.org/10.1016/0167-6636(87)90007-x.
Texte intégralBrown, Donald W., Sean R. Agnew, S. P. Abeln, W. R. Blumenthal, Mark A. M. Bourke, M. C. Mataya, Carlos Tomé et Sven C. Vogel. « The Role of Texture, Temperature and Strain Rate in the Activity of Deformation Twinning ». Materials Science Forum 495-497 (septembre 2005) : 1037–42. http://dx.doi.org/10.4028/www.scientific.net/msf.495-497.1037.
Texte intégralA. Shubbar, Sawsan D., et Aqeel S. Al-Shadeedi. « UTILIZATION OF WASTE PLASTIC BOTTLES AS FINE AGGREGATE IN CONCRETE ». Kufa Journal of Engineering 8, no 2 (17 juillet 2017) : 132–46. http://dx.doi.org/10.30572/2018/kje/821171.
Texte intégralEterashvili, Tamaz, Temur Dzigrashvili et M. Vardosanidze. « SEM Study of the Influence of Microstructure on Low Cycle Fatigue Crack Growth in Martensitic Steel I ». Key Engineering Materials 774 (août 2018) : 96–100. http://dx.doi.org/10.4028/www.scientific.net/kem.774.96.
Texte intégralTawfik, M. S., et T. D. O’Rourke. « Load-Carrying Capacity of Welded Slip Joints ». Journal of Pressure Vessel Technology 107, no 1 (1 février 1985) : 36–43. http://dx.doi.org/10.1115/1.3264401.
Texte intégral