Bibliographies thématiques / Plastic-bonded explosive

Littérature scientifique sur le sujet « Plastic-bonded explosive »

Auteur : Grafiati
Publié le 20 avril 2024

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Sommaire

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Plastic-bonded explosive ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Plastic-bonded explosive"

1

Zalewski, Karol, Zbigniew Chyłek et Waldemar A. Trzciński. « A Review of Polysiloxanes in Terms of Their Application in Explosives ». Polymers 13, no 7 (29 mars 2021) : 1080. http://dx.doi.org/10.3390/polym13071080.

Texte intégral
Résumé :
Polysiloxanes are reviewed for their properties depending on the functionalization of a silicon–oxygen backbone chain. Next, the properties were referred to the requirements that polymers used in plastic/polymer-bonded explosive (PBX)-type explosives must meet. Finally, the current state and prospects for the implementation of polysiloxanes in plastic/polymer-bonded explosive (PBX) formulations are presented.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Peterson, Paul D., Deanne J. Idar et John S. Gardner. « Compression Strengthening of Plastic Bonded Explosives ». Microscopy and Microanalysis 3, S2 (août 1997) : 1249–50. http://dx.doi.org/10.1017/s1431927600013131.

Texte intégral
Résumé :
A recent study concluded that the most potentially dangerous scenarios for accidental detonation of a nuclear weapon were those involving weak thermal or mechanical shocks. For this reason, more data are needed to understand the material behavior of nuclear constituents under low strain rate scenarios.One of the components of many of these types of weapons is known as Plastic Bonded eXplosives (PBX). PBX is a paniculate composite material made of a hard phase explosive carried in a soft phase polymer binder. Recent work has showed that the stiffness of PBX increased under low rate compressive loading. This behavior was attributed to the shape of the test samples and cross-linking within the elastomer binder. Another theory proposed that the changing compressive properties could be attributed to the hard phase particles migrating together during material flow.Funk et al. demonstrated an inert material mock of PBX 9501, with the hard phase explosive replaced by granular sugar, also showed the same phenomena of compressive hardening.
Styles APA, Harvard, Vancouver, ISO, etc.
3

Gloc, Michał, Sylwia Przybysz-Gloc, Marcin Wachowski, Robert Kosturek, Rafał Lewczuk, Ireneusz Szachogłuchowicz, Paulina Paziewska, Andrzej Maranda et Łukasz Ciupiński. « Research on Explosive Hardening of Titanium Grade 2 ». Materials 16, no 2 (15 janvier 2023) : 847. http://dx.doi.org/10.3390/ma16020847.

Texte intégral
Résumé :
In this investigation, three different explosive materials have been used to improve the properties of titanium grade 2: ammonal, emulsion explosives, and plastic-bonded explosives. In order to establish the influence of explosive hardening on the properties of the treated alloys, tests were conducted, including microhardness testing, microstructure analysis, and tensile and corrosion tests. It has been found that it is possible to achieve a 40% increase in tensile strength using a plastic explosive (PBX) as an explosive material. On the other hand, the impact of the shock wave slightly decreased the corrosion resistance of titanium grade 2. The change in corrosion rate is less than 0.1µm/year, which does not significantly affect the overall corrosion resistance of the material. The reduction in corrosion resistance is probably due to the surface geometry changes as a result of explosive treatment.
Styles APA, Harvard, Vancouver, ISO, etc.
4

Elbeih, Ahmed. « Characteristics of a New Plastic Explosive Named EPX-1 ». Journal of Chemistry 2015 (2015) : 1–6. http://dx.doi.org/10.1155/2015/861756.

Texte intégral
Résumé :
EPX-1 is a new plastic explosive (in the research stage) which has been prepared for military and civilian applications. EPX-1 explosive contains pentaerythritol tetranitrate (PETN) with different particle size as explosive filler bonded by nonenergetic thermoplastic binder plasticized by dibutyl phthalate (DBP). In this paper, the production method of EPX-1 was described. The crystal morphology was studied by scanning electron microscope (SEM). Heat of combustion was determined experimentally. The compatibility of PETN with the polymeric matrix was studied by vacuum stability test. Sensitivities to impact and friction were measured. The detonation velocity was measured experimentally and the detonation characteristics were calculated by EXPLO5 thermodynamic code. For comparison, Semtex 1A, Semtex 10, Formex P1, and Sprängdeg m/46 were studied. It was concluded that PEX-1 has compatible ingredients, it has the highest detonation velocity of all the studied plastic explosives, and its sensitivity is in the same level of the studied plastic explosives except Semtex 1A.
Styles APA, Harvard, Vancouver, ISO, etc.
5

Tompa, Albert S., et Robert F. Boswell. « Thermal stability of a plastic bonded explosive ». Thermochimica Acta 357-358 (août 2000) : 169–75. http://dx.doi.org/10.1016/s0040-6031(00)00386-5.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Elbeih, Ahmed, Tamer Elshenawy et Mohamed Gobara. « Application of cis-1,3,4,6-Tetranitrooctahydroimidazo-[4,5d] Imidazole (BCHMX) in EPX-1 Explosive ». Defence Science Journal 66, no 5 (30 septembre 2016) : 499. http://dx.doi.org/10.14429/dsj.66.9876.

Texte intégral
Résumé :
cis-1,3,4,6-Tetranitrooctahydroimidazo-[4,5 d]imidazole (BCHMX) has been studied as explosive filler to replace pentaerythritol tetra-nitrate (PETN) inEPX1 explosive. BCHMX with different particle sizes was bonded by thermoplastic binder plasticised by dibutyl phthalate to obtain BCHMX-EPX. Heat of combustion was measured. Impact energy and friction force of initiation were determined. Velocity of detonation was measured, while the detonation characteristics were calculated by thermodynamic code named EXPLO 5. For comparison, the detonation characteristics of some commercial plastic explosives such asEPX-1, SEMTEX 10 and FORMEX P1were also studied. It was concluded that BCHMX-EPX has the highest detonation characteristics of all the studied plastic explosives and its sensitivity is in the same level of the studied traditional plastic explosives. BCHMX-EPX has the highest decomposition temperature of all the studied samples. The mutual relationship obtained from the experimental and calculated results indicates the compatibility of the calculated results with the experimental measurements.
Styles APA, Harvard, Vancouver, ISO, etc.
7

Hoffman, D. Mark. « Infrared properties of three plastic bonded explosive binders ». International Journal of Polymer Analysis and Characterization 22, no 6 (4 juillet 2017) : 545–56. http://dx.doi.org/10.1080/1023666x.2017.1343110.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

FU, HUA, TAO LI, DUO-WANG TAN et FENG ZHAO. « SHOCK HUGONIOT RELATION OF UNREACTED HETEROGENEOUS EXPLOSIVES ». International Journal of Modern Physics B 25, no 21 (20 août 2011) : 2905–13. http://dx.doi.org/10.1142/s0217979211100527.

Texte intégral
Résumé :
There is a continuing interest in determining the characteristics of unreacted plastic bonded explosives (PBXs). In this work, a Particle Velocity Comparing Method to determine the unreacted Hugoniot of heterogeneous explosive using magnetic particle velocity gauge is described. The Hugoniot for the PBXs has been measured using flyer driven by planar wave lens. A superposition principle considering unreacted explosives as composite and porous materials is presented, the unreacted Hugoniot of explosives is calculated, and the results of calculation are compared with the experiment results.
Styles APA, Harvard, Vancouver, ISO, etc.
9

Gerken, Jobie M., Joel G. Bennett et F. W. Smith. « Numerical Simulation of the Mechanically Coupled Cook-Off Experiment ». Journal of Engineering Materials and Technology 124, no 2 (26 mars 2002) : 266–73. http://dx.doi.org/10.1115/1.1429936.

Texte intégral
Résumé :
There has been a significant amount of recent interest concerning the behavior of High Explosives including work on an experiment known as the Mechanically Coupled Cook Off experiment in which a confined sample of polymer bonded explosive is heated and then ignited. This paper presents a finite element simulation of that experiment and provides comparisons with the experimental results. The numerical simulation includes elastic-plastic behavior of the confinement, thermal expansion effects, the mechanical and thermal response of the explosive, and a discrete crack propagation model. The results of the numerical simulation show that the general features of the experiment are reproduced.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Picart, Didier, J. Ermisse, M. Biessy, E. Bouton et H. Trumel. « MODELING AND SIMULATION OF PLASTIC-BONDED EXPLOSIVE MECHANICAL INITIATION ». International Journal of Energetic Materials and Chemical Propulsion 12, no 6 (2013) : 487–509. http://dx.doi.org/10.1615/intjenergeticmaterialschemprop.2013007509.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Plus de sources

Thèses sur le sujet "Plastic-bonded explosive"

1

Handley, Caroline A. « Numerical modelling of two HMX-based plastic-bonded explosives at the mesoscale ». Thesis, University of St Andrews, 2011. http://hdl.handle.net/10023/1709.

Texte intégral
Résumé :
Mesoscale models are needed to predict the effect of changes to the microstructure of plastic-bonded explosives on their shock initiation and detonation behaviour. This thesis describes the considerable progress that has been made towards a mesoscale model for two HMX-based explosives PBX9501 and EDC37. In common with previous work in the literature, the model is implemented in hydrocodes that have been designed for shock physics and detonation modelling. Two relevant physics effects, heat conduction and Arrhenius chemistry, are added to a one-dimensional Lagrangian hydrocode and correction factors are identified to improve total energy conservation. Material models are constructed for the HMX crystals and polymer binders in the explosives, and are validated by comparison to Hugoniot data, Pop-plot data and detonation wave profiles. One and two-dimensional simulations of PBX9501 and EDC37 microstructures are used to investigate the response of the bulk explosive to shock loading. The sensitivity of calculated temperature distributions to uncertainties in the material properties data is determined, and a thermodynamic explanation is given for time-independent features in temperature profiles. Hotspots are widely accepted as being responsible for shock initiation in plastic-bonded explosives. It is demonstrated that, although shock heating of crystals and binder is responsible for temperature localisation, it is not a feasible hotspot mechanism in PBX9501 and EDC37 because the temperatures generated are too low to cause significant chemical reaction in the required timescales. Critical hotspot criteria derived for HMX and the binders compare favourably to earlier studies. The speed of reaction propagation from hotspots into the surrounding explosive is validated by comparison to flame propagation data, and the temperature of the gaseous reaction products is identified as being responsible for negative pressure dependence. Hotspot size, separation and temperature requirements are identified which can be used to eliminate candidate mechanisms in future.
Styles APA, Harvard, Vancouver, ISO, etc.
2

Plassart, Gaétane. « Comportement mécanique anisotrope induit des explosifs comprimés ». Electronic Thesis or Diss., Bourges, INSA Centre Val de Loire, 2020. http://www.theses.fr/2020ISAB0003.

Texte intégral
Résumé :
Cette étude porte sur la caractérisation et la modélisation du comportement thermomécanique quasistatique d’un explosif comprimé appelé M2. Tout d’abord, un état de l’art de la caractérisation des explosifs comprimés est dressé et les modèles développés pour ces matériaux sont étudiés. Les données expérimentales disponibles sur M2 étant limitées, une campagne est engagée afin de caractériser le comportement quasistatique de ce matériau composite agrégataire. De nombreux chargements sont réalisés à différentes vitesses, pressions et températures. Les réponses expérimentales mettent en évidence un comportement viscoélastique endommageable et une anisotropie induite par l’écoulement plastique. Les modèles définis pour les explosifs comprimés ne sont pas appropriés pour décrire ce comportement. Un modèle tenant compte des mécanismes observés est alors formulé. La viscoélasticité est intégrée à un modèle microplan permettant la description de l’endommagement anisotrope et de son effectivité. Une viscoplasticité multicouche est formulée pour décrire l’écrouissage cinématique non linéaire. Le critère de plasticité de chaque surface est de type von Mises. Une dilatance décrit l’écoulement volumique. La loi de comportement est implémentée dans le code aux éléments finis Abaqus/Standard sous la forme d’une routine utilisateur. Le modèle, qui comporte plus de cinquante paramètres, est identifié sur M2 à partir de dix essais. Soixante simulations sont ensuite réalisées pour confronter le modèle à tous les essais. À quelques exceptions près, le modèle reproduit correctement le comportement de M2. Des pistes de réflexion sont ouvertes pour optimiser l’algorithme. Enfin, l’application du modèle à d’autres explosifs comprimés est mise en question. Le comportement d’un second matériau énergétique agrégataire est analysé. Des simulations prospectives indiquent qu’un travail sur les fonctions d’effectivité est nécessaire avant de pouvoir généraliser le modèle
The characterization and modeling of the quasistatic thermomechanical behaviour of a plastic-bonded explosive (PBX) called M2 is the focus of this study. First, a state of the art of the characterization of PBXs is compiled. The models developed for these materials are presented. Few data being available on M2, an experimental campaign is then performed in order to characterize the quasistatic behaviour of this aggregate composite material. Many different loadings are carried out at different strain rates, pressures and temperatures. Experimental data highlight a viscoelastic behaviour subject to damage and an anisotropy induced by plastic flow. The models for PBXs are not appropriate to describe this behavior. A model accounting for the observed mechanisms is then formulated. The viscoelasticity is integrated in a microplane model describing an effective anisotropic damage. Amultilayer viscoplasticity describes a non-linear kinematic strain-hardening. A von Mises yield criterion is defined on each surface and a dilatancy function describes the volumetric plastic yield. This behaviour law is implemented in the Abaqus/Standard finite element code in the form of a user routine. The model, which contains more than fifty parameters, is identified on M2 from ten tests. Sixty simulations are then carried out to compare the model to each test. The model correctly reproduces the M2 behavior, with just few exceptions. Some ideas to optimize the algorithm are exposed. Finally, the applicability of the model to other PBXs is questioned. The behaviour of a second aggregate energetic material is analyzed. Prospective simulations indicate that the effectivity functions need to be worked on before the model can be generalized to PBXs
Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Plastic-bonded explosive"

1

Kress, J. D., D. A. Wrobleski, D. A. Langlois, E. B. Orler, J. M. Lightfoot, W. A. Rodin, C. Huddleston et al. « Aging of the Binder in Plastic-Bonded Explosive PBX 9501 and Free Radical Oxidation ». Dans ACS Symposium Series, 227–38. Washington, DC : American Chemical Society, 2009. http://dx.doi.org/10.1021/bk-2009-1004.ch020.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Nan, Hai, Chunyan Chen, Yufan Bu, Yulei Niu et Xuanjun Wang. « Mechanical Behavior of Cast Plastic-Bonded Explosives ». Dans Springer Proceedings in Physics, 255–64. Singapore : Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1774-5_20.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Kennedy, G. R., P. R. Deacon, N. J. Herbert, A. L. Lewis, T. E. Lilly, A. F. Macdonald, G. Miles et M. K. Till. « Ageing Processes of Nitrocellulose in Plastic Bonded Explosives ». Dans Ageing Studies and Lifetime Extension of Materials, 123–27. Boston, MA : Springer US, 2001. http://dx.doi.org/10.1007/978-1-4615-1215-8_12.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Flesner, Raymond, P. C. Dell’Orco, T. Spontarelli, R. L. Bishop, C. B. Skidmore, K. Uher et J. F. Kramer. « Pilot-Scale Base Hydrolysis Processing of HMX-Based Plastic-Bonded Explosives ». Dans Effluents from Alternative Demilitarization Technologies, 35–45. Dordrecht : Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-5310-2_4.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Plastic-bonded explosive"

1

Thomas, Keith A. « Transient Detonation Processes in a Plastic Bonded Explosive ». Dans Shock Compression of Condensed Matter - 2001 : 12th APS Topical Conference. AIP, 2002. http://dx.doi.org/10.1063/1.1483714.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Dey, T. N., et J. N. Johnson. « Shear band formation in plastic bonded explosive (PBX) ». Dans The tenth American Physical Society topical conference on shock compression of condensed matter. AIP, 1998. http://dx.doi.org/10.1063/1.55648.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Pauler, D. K. « Decomposition of Nitroplasticizer in Plastic Bonded Explosive PBX 9501 ». Dans SHOCK COMPRESSION OF CONDENSED MATTER - 2005 : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2006. http://dx.doi.org/10.1063/1.2263381.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Picart, D., M. Biessy et J. L. Brigolle. « Intermediate strain rate characterization of a plastic-bonded explosive composition ». Dans DYMAT 2009 - 9th International Conferences on the Mechanical and Physical Behaviour of Materials under Dynamic Loading. Les Ulis, France : EDP Sciences, 2009. http://dx.doi.org/10.1051/dymat/2009048.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Millett, J. C. F., P. Taylor et G. Appleby-Thomas. « Shock induced shear strength in an HMX based plastic bonded explosive ». Dans SHOCK COMPRESSION OF CONDENSED MATTER - 2015 : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Author(s), 2017. http://dx.doi.org/10.1063/1.4971682.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Li, M., J. Zhang, Chun-Yang Xiong, J. Fang, Y. Hao et M. P. Wen. « Fracture analysis of plastic-bonded explosive by digital image correlation technique ». Dans Third International Conference on Experimental Mechanics, sous la direction de Xiaoping Wu, Yuwen Qin, Jing Fang et Jingtang Ke. SPIE, 2002. http://dx.doi.org/10.1117/12.468795.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Todd, S. N., T. J. Vogler, T. L. Caipen, D. E. Grady, Mark Elert, Michael D. Furnish, Ricky Chau, Neil Holmes et Jeffrey Nguyen. « NON-SHOCK INITIATION MODEL FOR PLASTIC BONDED EXPLOSIVE PBXN-5 : THEORETICAL RESULTS ». Dans SHOCK COMPRESSION OF CONDENSED MATTER - 2007 : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2008. http://dx.doi.org/10.1063/1.2832885.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Lappo, K. N., S. N. Todd, M. U. Anderson, T. J. Vogler, Mark Elert, Michael D. Furnish, Ricky Chau, Neil Holmes et Jeffrey Nguyen. « NON-SHOCK INITIATION OF THE PLASTIC BONDED EXPLOSIVE PBXN-5 : EXPERIMENTAL RESULTS ». Dans SHOCK COMPRESSION OF CONDENSED MATTER - 2007 : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2008. http://dx.doi.org/10.1063/1.2833288.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Long, Xu, Jiaqi Zhu, Yutai Su, Kim S. Siow et Chuantong Chen. « Phase-Field Modelling for Crack Evolution of PBX Under Thermomechanical Loadings ». Dans ASME 2022 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/imece2022-96468.

Texte intégral
Résumé :
Abstract Polymer-bonded explosive (PBX), also known as plastic-bonded explosive, is a typical kind of explosive powder with the synthetic polymer bonded together explosive composite materials. It has excellent explosion performance and thus is widely applied in the military and civilian industries. The PBX mechanical properties exhibit high sensitivities to the action of various types of loads, which is closely related to microscopic damage mechanisms within the material. The applied loads vary considerably, with amplitudes ranging from a few MPa to as high as several tens of GPa and durations lasting from the order of μs to ms. The cracking evolution is essential to the PBX applications in a strict control manner. However, PBXs are dangerous energy-bearing materials, and the mechanical experiments to measure their mechanical properties are costly and also challenging. Therefore, theoretical analysis and numerical simulation are anticipated to explore the sensitivities of PBX mechanical properties and also the influence of crack evolution. This paper will simulate numerically the process of work done of PBX explosive gas by fracture phase-field method, which reveals the typical microscopical mechanism of crack evolution and establish a computational model for crack propagation under the coupled thermomechanical effects.
Styles APA, Harvard, Vancouver, ISO, etc.
10

Sutherland, G. T., J. W. Forbes, E. R. Lemar, K. D. Ashwell et R. N. Baker. « Multiple stress-time profiles in a RDX/AP/Al/HTPB plastic bonded explosive ». Dans High-pressure science and technology—1993. AIP, 1994. http://dx.doi.org/10.1063/1.46469.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Plastic-bonded explosive"

1

B. Olinger. Compacting Plastic-Bonded Explosive Molding Powders to Dense Solids. Office of Scientific and Technical Information (OSTI), avril 2005. http://dx.doi.org/10.2172/883457.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
2

Yee, Rena Y., et E. C. Martin. Effects of Surface Interactions and Mechanical Properties of Plastic Bonded Explosives on Explosive Sensitivity. Part 2. Model Formulation. Fort Belvoir, VA : Defense Technical Information Center, mars 1985. http://dx.doi.org/10.21236/ada157900.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
3

Heatwole, Eric Mann, Gary R. Jr Parker, Peter Dickson, Matthew D. Holmes et Jake A. Gunderson. Probability Calculation of Grit-Grit Interaction on a Plastic Bonded Explosive During Glancing Impacts. Office of Scientific and Technical Information (OSTI), août 2013. http://dx.doi.org/10.2172/1089879.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
4

Sullivan, Gregg K. Plastic Bonded Explosive (PBX) Particle Size Distribution (PSD) Measurements Using an Image Analysis System. Office of Scientific and Technical Information (OSTI), juin 2003. http://dx.doi.org/10.2172/818148.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
5

Reaugh, J. Implementation of strength and burn models for plastic-bonded explosives and propellants. Office of Scientific and Technical Information (OSTI), mai 2009. http://dx.doi.org/10.2172/953311.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
6

Baker, Wilfred E., et Donna W. O'Kelley. TNT Equivalence of Two Plastic-Bonded Explosives for Internal Blast and Gas Pressures. Fort Belvoir, VA : Defense Technical Information Center, août 1986. http://dx.doi.org/10.21236/adp005387.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
7

Wiegand, Donald A., et Brett Reddingius. Strengthening and Stiffening of Plastic Bonded Explosives Under Pressure and Metal-Like Mechanical Properties. Fort Belvoir, VA : Defense Technical Information Center, novembre 2005. http://dx.doi.org/10.21236/ada441083.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
8

Burgess, C. E., J. D. Woodyard, K. A. Rainwater, J. M. Lightfoot et B. R. Richardson. Literature review of the lifetime of DOE materials : Aging of plastic bonded explosives and the explosives and polymers contained therein. Office of Scientific and Technical Information (OSTI), septembre 1998. http://dx.doi.org/10.2172/290850.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
9

Hayden, D. W. An Analytic Tool to Investigate the Effect of Binder on the Sensitivity of HMX-Based Plastic Bonded Explosives in the Skid Test. Office of Scientific and Technical Information (OSTI), novembre 2004. http://dx.doi.org/10.2172/837288.

Texte intégral
Styles APA, Harvard, Vancouver, ISO, etc.
Vous pouvez également être intéressé par les bibliographies sur le sujet « Plastic-bonded explosive » pour d’autres types de sources :
Articles de revues
Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!

Vers la bibliographie