Livres sur le sujet « Piping analysi »

U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology., dir. Seismic analysis of piping : Final program report. Washington, DC : Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1998.

S, Mirza, Fisher H. D, American Society of Mechanical Engineers. Pressure Vessels and Piping Division. et Pressure Vessels and Piping Conference (1991 : San Diego, Calif.), dir. Piping components analysis : Piping and structural dynamics, 1991 : presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991. New York, N.Y : American Society of Mechanical Engineers, 1991.

PVP, Fall Conference (1987 Knoxville Tenn ). Advances in piping analysis and life assessment for pressure vessels and piping : Presented at the 1987 PVP Fall Conference, Knoxville, Tennessee, October 21-23, 1987. New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, 1987.

Hamdan, Fadi. Protection of piping systems subject to fires and explosions. Ascot, Berkshire : Steel Construction Institute, 2005.

Chun, R. C. Parametric study of pipe whip analysis. Washington, D.C : Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1987.

W, Brust F., Battelle Memorial Institute et U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering Technology., dir. Assessment of short through-wall circumferential cracks in pipes : Experiments and analysis, March 1990 - December 1994. Washington, DC : U.S. Nuclear Regulatory Commission, 1995.

Ahmed, Ansari Naseem, et Bhabha Atomic Research Centre, dir. Evaluation of crack opening area and leak rate in various PHT pipings for LBB analysis of Indian PHWRs. Mumbai : Bhabha Atomic Research Centre, 2000.

Pressure Vessels and Piping Conference (1989 Honolulu, Hawaii). Design and analysis of piping and components, 1989 : Presented at the 1989 ASME Pressure Vessels and Piping Conference--JSME co-sponsorship, Honolulu, Hawaii, July 23-27, 1989. Sous la direction de Truong Q. N et Nihon Kikai Gakkai. New York, N.Y : American Society of Mechanical Engineers, 1989.

J, Olson R., Battelle Memorial Institute et U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research. Division of Engineering., dir. Validation of analysis methods for assessing flawed piping subjected to dynamic loading. Washington, DC : U.S. Nuclear Regulatory Commission, 1994.

Dubey, P. N. Analysis of AHWR downcomer piping supported on elasto-plastic dampers and subjected to normal and earthquake loads. Mumbai : Bhabha Atomic Research Centre, 2010.

F, Sammataro R., Osweiller F, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., American Society of Mechanical Engineers. NDE Engineering Division. et Pressure Vessels and Piping Conference (1990 : Nashville, Tenn.), dir. Codes and standards and applications for design and analysis of pressure vessel and piping components, 1990 : Presented at the 1990 Pressure Vessels and Piping Conference, Nashville, Tennessee, June 17-21, 1990. New York, N.Y : American Society of Mechanical Engineers, 1990.

Pressure Vessels and Piping Conference (1988 Pittsburgh, Pa.). Codes and standards and applications for design and analysis of pressure vessel and piping components : Presented at the 1988 ASME Pressure Vessels and Piping Conference, Pittsburgh, Pennsylvania, June 19-23, 1988. Sous la direction de Seshadri R, American Society of Mechanical Engineers. Pressure Vessels and Piping Division. Design and Analysis Committee. et American Society of Mechanical Engineers. Codes and Standards Technical Subcommittee. New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, 1988.

Pressure Vessels and Piping Conference (1989 Honolulu, Hawaii). Codes and standards and applications for design and analysis of pressure vessel and piping components, 1989 : Presented at the 1989 ASME Pressure Vessels and Piping Conference, JSME co-sponsorship, Honolulu, Hawaii, July 23-27, 1989. Sous la direction de Seshadri R, Breen J. P et Nihon Kikai Gakkai. New York, N.Y : American Society of Mechanical Engineers, 1989.

ASME Pressure Vessels and Piping Conference. (1988 Pittsburgh, Pa.). Design and analysis of piping, pressure vessels, and components - 1988 : Presented at the ASME Pressure Vessels and Piping Conference, Pittsburgh, Pennsylvania, June 19-23, 1988 : sponsored by Design and Analysis Committee of the Pressure Vessels and Piping Division, ASME. New York : American Society of Mechanical Engineers, 1988.

Stevenson & Associates., Oak Ridge National Laboratory et U.S. Nuclear Regulatory Commission. Office of Nuclear Regulatory Research., dir. Application of bounding spectra to seismic design of piping based on the performance of above ground piping in power plants subjected to strong motion earthquakes. Washington, D.C : Division of Engineering Technology, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1995.

Ont.) Pressure Vessels and Piping Conference (2012 Toronto. Proceedings of the ASME Pressure Vessels and Piping Conference--2012. New York, N.Y : American Society of Mechanical Engineers, 2012.

Centre, Bhabha Atomic Research, dir. Three dimensional analysis of piping components using barc finite element based damage mechanics code "Madam". Mumbai : Bhabha Atomic Research Centre, 2001.

Zeng, Lingfu. Toward consistent design evaluation of nuclear power piping by nonlinear finite element analysis. New York, NY : The American Society of Mechanical Engineers (ASME), 2015.

Analysis for design of fiber reinforced plastic vessels and pipings. Lancaster, Pa : Technomic Pub. Co., 1991.

I, Ezekoye L., Lory B. M, American Society of Mechanical Engineers. Pressure Vessels and Piping Division. et Pressure Vessels and Piping Conference (2000 : Seattle, Wash.), dir. Aging, management, component and piping analysis, nondestructive engineering, monitoring and diagnostics, 2000 : Presented at the 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 23-27, 2000. New York : American Society of Mechanical Engineers, 2000.

Pressure Vessels and Piping Conference (2003 Cleveland, Ohio). Fatigue, fracture, and damage analysis, 2003 : Presented at the 2003 ASME Pressure Vessels and Piping Conference, Cleveland, Ohio, July 20-24, 2003. Sous la direction de Moinereau Dominique, Yoon K. K, Choi Jae-Boong et American Society of Mechanical Engineers. Pressure Vessels and Piping Division. New York, N.Y : American Society of Mechanical Engineers, 2003.

Pressure, Vessels and Piping Conference (2001 Atlanta Ga ). Pressure vessel and piping design and analysis, 2001 : Presented at the 2001 ASME Pressure Vessels and Piping Conference, Atlanta, Georgia, July 22-26, 2001. New York, N.Y : American Society of Mechanical Engineers, 2001.

E, Short W., American Society of Mechanical Engineers. Pressure Vessels and Piping Division. Design and Analysis Committee. et Pressure Vessels and Piping Conference (1986 : Chicago, Ill.), dir. Pressure vessels, piping, and components : Design & analysis : presented at the 1986 Pressure Vessels and Piping Conference and Exhibition, Chicago, Illinois, July 20-24, 1986. New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, 1986.

France) Pressure Vessels and Piping Conference (2013 Paris. Proceedings of the ASME Pressure Vessels and Piping Conference--2013. New York, N.Y : American Society of Mechanical Engineers, 2014.

Pressure, Vessels and Piping Conference (1988 Pittsburgh Pa ). Design and analysis of piping, pressure vessels, and components, 1988 : Presented at the 1988 ASME Pressure Vessels and Piping Conference, Pittsburgh, Pennsylvania, June 19-23, 1988. New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, 1988.

ASME Pressure Vessels and Piping Conference. (1992 New Orleans, La.). Design and analysis of pressure vessels, piping, and components, 1992 : Presented at the 1992 Pressure Vessels and Piping Conference, New Orleans, Louisiana, June 21-25, 1992. Sous la direction de Becht C et American Society of Mechanical Engineers. Pressure Vessels and Piping Division. New York : American Society of Mechanical Engineers, 1992.

E, Short W., American Society of Mechanical Engineers. Pressure Vessels and Piping Division. Design and Analysis Committee. et Pressure Vessels and Piping Conference (1987 : San Diego, Calif.), dir. Design and analysis of piping, pressure vessels, and components : Presented at the 1987 Pressure Vessels and Piping Conference, San Diego, California, June 28-July 2, 1987. New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, 1987.

Ravi, Baliga, Martens Dennis, American Society of Mechanical Engineers. Pressure Vessels and Piping Division. et Pressure Vessels and Piping Conference (2000 : Seattle, Wash.), dir. Design and analysis of pressure vessels and piping, 2000 : Presented at the 2000 ASME Pressure Vessels and Piping Conference, Seattle, Washington, July 23-27, 2000. New York : American Society of Mechanical Engineers, 2000.

Pressure, Vessels and Piping Conference (2008 Chicago Ill ). Proceedings of the ASME Pressure Vessels and Piping Conference--2008 : Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York : American Society of Mechanical Engineers, 2009.

American Society of Mechanical Engineers. Pressure Vessels and Piping Division., dir. Proceedings of the ASME Pressure Vessels and Piping Conference--2008 : Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York : American Society of Mechanical Engineers, 2009.

Pressure Vessels and Piping Conference (2008 Chicago, Ill.). Proceedings of the ASME Pressure Vessels and Piping Conference--2008 : Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York : American Society of Mechanical Engineers, 2009.

Pressure Vessels and Piping Conference (2008 Chicago, Ill.). Proceedings of the ASME Pressure Vessels and Piping Conference--2008 : Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York : American Society of Mechanical Engineers, 2009.

Pressure, Vessels and Piping Conference (1989 Honolulu Hawaii). Design and analysis of pressure vessels and components, 1989 : Presented at the 1989 ASME Pressure Vessels and Piping Conference-JSME Co-Sponsorship, Honolulu, Hawaii, July 23-27 1989. New York, N.Y : The American Society of Mechanical Engineers, 1989.

Pressure Vessels and Piping Conference (1988 Pittsburgh, Pa.). Application of modal analysis to extreme loads : Presented at the 1988 ASME Pressure Vessels and Piping Conference, Pittsburgh, Pennsylvania, June 19-23, 1988. New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, 1988.

A, Dermenjian Artin, American Society of Mechanical Engineers. Pressure Vessels and Piping Division. et Pressure Vessels and Piping Conference (1996 : Montréal, Québec), dir. Pressure vessels and piping design, analysis, and severe accidents : Presented at the 1996 ASME Pressure Vessels and Piping Conference, Montreal, Quebec, Canada, July 21-26, 1996. New York, N.Y : American Society of Mechanical Engineers, 1996.

Pressure Vessels and Piping Conference (1992 New Orleans, La.). Design and analysis of pressure vessels, piping, and components, 1992 : Presented at the 1992 Pressure Vessels and Piping Conference, New Orleans, Louisiana, June 21-25, 1992. Sous la direction de Becht C et American Society of Mechanical Engineers. Pressure Vessels and Piping Division. New York : American Society of Mechanical Engineers, 1992.

Md.) Pressure Vessels and Piping Conference (2011 Baltimore. Proceedings of the ASME Pressure Vessels and Piping Conference--2011 : Presented at ASME 2011 Pressure Vessels and Piping Conference, July 17-21, 2011, Baltimore, Maryland, USA. New York, N.Y : American Society of Mechanical Engineers, 2012.

Steele, R. Generic issue 87 : Flexible wedge gate valve test program : phase II results and analysis. Washington, DC : Division of Engineering, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1991.

U.S. Nuclear Regulatory Commission. Division of Safety Issue Resolution, dir. Regulatory analysis for the resolution of generic safety issue 106 : Piping and the use of highly combustible gases in vital areas. Washington, DC : Division of Safety Issue Resolution, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1993.

J, Bees W., American Society of Mechanical Engineers. Pressure Vessels and Piping Division. et Pressure Vessels and Piping Conference (1993 : Denver, Colo.), dir. Design analysis, robust methods, and stress classification : Presented at the 1993 Pressure Vessels and Piping Conference, Denver, Colorado, July 25-29, 1993. New York : American Society of Mechanical Engineers, 1993.

Pressure Vessels and Piping Conference. (1987 San Diego, Calif.). Seismic engineering : Recent advances in design, analysis, testing, and qualification methods : presented at the 1987 Pressure Vessels and Piping Conference, San Diego, California, June 28-July 2, 1987. Sous la direction de Chen Pei-Ying, Liu T. H, Marr A. H. C, American Society of Mechanical Engineers. Pressure Vessels and Piping Division. Operations, Applications, and Components Committee. et American Society of Mechanical Engineers. Pressure Vessels and Piping Division. Design and Analysis Committee. New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, 1987.

ASME Pressure Vessels and Piping Conference. (1989 Honolulu, Hawaii). Seismic engineering, 1989 : Design, analysis, testing, and qualification methods : presented at the 1989 ASME Pressure Vessels and Piping Conference--JSME co-sponsorship, Honolulu, Hawaii, July 23-27, 1989. Sous la direction de Fujita K et Nihon Kikai Gakkai. New York, N.Y : American Society of Mechanical Engineers, 1989.

ASME Pressure Vessels and Piping Conference--JSME Co-Sponsorship (1989 Honolulu, Hawaii). Design and analysis of piping and components, 1989 : Presented at the 1989 ASME Pressure Vessels and Piping Conference - JSME Co-Sponsorship, Honolulu, Hawaii, July 23-27, 1989. Sous la direction de Truong Q. N, Goodling Evans C, Balaschak J. J, Widera G. E. O et American Society of Mechanical Engineers. Pressure Vessels and Piping Division. New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, 1989.

Pressure Vessels and Piping Conference (2002 Vancouver, British Columbia). Design and analysis of piping, vessels, and components--2002 : Presented at the 2002 ASME Pressure Vessels and Piping Conference : Vancouver, British Columbia, Canada, August 5-9, 2002. Sous la direction de Dermenjian Artin A, McCabe James F et American Society of Mechanical Engineers. Pressure Vessels and Piping Division. New York : American Society of Mechanical Engineers, 2002.

I, Ezekoye L., Sawa T, Kisisel I. T, American Society of Mechanical Engineers. Pressure Vessels and Piping Division. et Pressure Vessels and Piping Conference (1998 : San Diego, California), dir. Component analysis and evaluation, aging and maintenance, and pipe supports : Presented at the 1998 ASME/JSME Joint Pressure Vessels and Piping Conference, San Diego, California, July 26-30, 1998. New York, New York : American Society of Mechanical Engineers, 1998.

Chŏng, Yong-mu. Wŏnjŏn paegwan kyetʻong ŭi chŏnjagi chʻoŭmpʻa kŏmsa, kamsi kisul kaebal = : Development of electromagnetic ultrasonic testing, monitoring technology for piping in nuclear power plant. [Seoul] : Chisik Kyŏngjebu, 2008.

Chŏng, Yong-mu. Wŏnjŏn paegwan kyetʻong ŭi chŏnjagi chʻoŭmpʻa kŏmsa, kamsi kisul kaebal = : Development of electromagnetic ultrasonic testing, monitoring technology for piping in nuclear power plant. [Seoul] : Chisik Kyŏngjebu, 2008.

Basdekas, D. Regulatory analysis for the resolution of Generic issue 125.II.7, "Reevaluate provision to automatically isolate feedwater from steam generator during a line break". Washington, DC : Division of Safety Issue Resolution, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, 1988.

Pressure Vessels and Piping Conference (2010 Bellevue, Wash.). Proceedings of the ASME Pressure Vessels and Piping Conference--2010 : Presented at ASME 2010 Pressure Vessels and Piping Conference/K-PVP Conference, July 18-22, 2010, Bellevue, Washington, USA. New York : American Society of Mechanical Engineers, 2010.

ASME Pressure Vessels and Piping Conference. (1988 Pittsburgh, Pa.). Elastic-plastic failure modelling of structures with applications : Presented at the 1988 ASME Pressure Vessels and Piping Conference, Pittsburgh, Pennsylvania, June 19-23, 1988 : sponsored by the Pressure Vessels and Piping Division, ASME. New York : American Society of Mechanical Engineers, 1988.