Littérature scientifique sur le sujet « Physical foaming »
Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres
Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Physical foaming ».
À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.
Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.
Articles de revues sur le sujet "Physical foaming"
Ogawa, Yuji, Didier Huin, Henri Gaye et Naoki Tokumitsu. « Physical Model of Slag Foaming. » ISIJ International 33, no 1 (1993) : 224–32. http://dx.doi.org/10.2355/isijinternational.33.224.
Texte intégralLi, Qi Jin, Guo Zhong Li et Cong Cong Jiang. « Study on the Properties of Physical and Chemical Foaming Concrete ». Advanced Materials Research 549 (juillet 2012) : 741–44. http://dx.doi.org/10.4028/www.scientific.net/amr.549.741.
Texte intégralGhag, Surinder S., Peter C. Hayes et Hae-Geon Lee. « Physical Model Studies on Slag Foaming. » ISIJ International 38, no 11 (1998) : 1201–7. http://dx.doi.org/10.2355/isijinternational.38.1201.
Texte intégralПопов, Александр, Aleksandr Popov, В. В. Нелюбова, Viktoriya Nelyubova, Д. Нецвет et Dar'ya Necvet. « THE INFLUENCE OF THE FOAMING AGENTS NATURE ON PHYSICAL AND TECHNICAL PROPERTIES OF FOAM ». Bulletin of Belgorod State Technological University named after. V. G. Shukhov 3, no 3 (25 mars 2018) : 5–12. http://dx.doi.org/10.12737/article_5abfc9b7ce94e3.70688983.
Texte intégralLlewelyn, Rees, Griffiths et Jacobi. « A Novel Hybrid Foaming Method for Low-Pressure Microcellular Foam Production of Unfilled and Talc-Filled Copolymer Polypropylenes ». Polymers 11, no 11 (17 novembre 2019) : 1896. http://dx.doi.org/10.3390/polym11111896.
Texte intégralXalikovna, Musaeva Rano, Uvayzov Said Komilovich, Musaeva Nigina Xamidovna, Qo’ldosheva Feruza Salimovna et Akramov Doston Rustam Ugli. « RESEARCH AND EXPERIMENTAL DETERMINATION OF THERMO PHYSICAL PROPERTIESOF HIGHLY FOAMING SOLUTION ». International Journal of Psychosocial Rehabilitation 24, no 04 (28 février 2020) : 1918–28. http://dx.doi.org/10.37200/ijpr/v24i4/pr201300.
Texte intégralLiu, Fu-Min, et An-Lin Wang. « Numerical Investigation on Physical Foaming and Decay Process Using Multicomponent Thermal Lattice Boltzmann Model ». MATEC Web of Conferences 237 (2018) : 02003. http://dx.doi.org/10.1051/matecconf/201823702003.
Texte intégralZhang, Guangchun, Yuanliang Wang, Haiping Xing, Jian Qiu, Jiang Gong, Kun Yao, Haiying Tan, Zhiwei Jiang et Tao Tang. « Interplay between the composition of LLDPE/PS blends and their compatibilization with polyethylene-graft-polystyrene in the foaming behaviour ». RSC Advances 5, no 34 (2015) : 27181–89. http://dx.doi.org/10.1039/c4ra16084c.
Texte intégralZhai, Chenxi, Yang Yu, Yumei Zhu, Jing Zhang, Ying Zhong, Jingjie Yeo et Mingchao Wang. « The Impact of Foaming Effect on the Physical and Mechanical Properties of Foam Glasses with Molecular-Level Insights ». Molecules 27, no 3 (27 janvier 2022) : 876. http://dx.doi.org/10.3390/molecules27030876.
Texte intégralSun, Qiang, Guan Bao Huang, Jun Hui Ji et Chang An Zhang. « Preparation of Poly(Butylene succinate)(PBS) Foaming Materials ». Advanced Materials Research 287-290 (juillet 2011) : 1805–10. http://dx.doi.org/10.4028/www.scientific.net/amr.287-290.1805.
Texte intégralThèses sur le sujet "Physical foaming"
Gong, Pengjian. « PHYSICAL FOAMING BEHAVIOR AT THE INTERFACE OF POLYMER BLENDS-Foaming Mechanism and its Application- ». 京都大学 (Kyoto University), 2013. http://hdl.handle.net/2433/180507.
Texte intégralPurcell, Matthew S. « Supercritical fluid foaming : a novel route to polymeric allografts ? » Thesis, University of Nottingham, 2014. http://eprints.nottingham.ac.uk/14198/.
Texte intégralSharudin, Rahida Wati Binti. « Carbon Dioxide Physical Foaming of Polymer Blends:-Blend Morphology and Cellular Structure- ». 京都大学 (Kyoto University), 2012. http://hdl.handle.net/2433/161019.
Texte intégralPhianmongkhol, Aphirak. « Characterisation of protein foams using a method based on conductivity measurement and measurement of physical properties of protein solutions relevant to foaming behaviour ». Thesis, University of Reading, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326975.
Texte intégralJiraporn, Sirison. « Studies on functional properties of soy lipophilic protein and its potential for food applications ». Doctoral thesis, Kyoto University, 2021. http://hdl.handle.net/2433/263363.
Texte intégralRainglet, Benoit. « Etude du moussage par CO2 de polypropylène et de TPV en autoclave et par extrusion : formulation, rhéologie et modélisation ». Electronic Thesis or Diss., Lyon, 2021. http://www.theses.fr/2021LYSES029.
Texte intégralWork on the physical foaming of vulcanised polyolefins and thermoplastics (TPV) by the addition of supercritical CO2, whether by continuous process (extrusion) or by batch process (reactor).Through the formulation, rheological study and foaming of existing and new polymers, a rheological criterion for defining the ability to foam was demonstrated and extended to complex polymer blends (as TPV). More specifically, the study of TPV formulation on foaming was investigated .Conclusions regarding cross-linking chemistry and addition of fillers were determined.Numerical modelling and implementation of extrusion foaming were carried out and demonstrated the possibility of obtaining a regular and homogeneous foam as well as predicting, depending on the input parameters, the final characteristics of the foam
Ercoli, Roberto. « Chemical neutralization of industrial by-products from the secondary aluminum industry : re-use as foaming agents for the synthesis of geopolymers and monitoring of the hydrogen-rich gas production ». Doctoral thesis, Urbino, 2022. http://hdl.handle.net/11576/2698511.
Texte intégralAlbertsson, Galina. « Effect of the presence of a dispersed phase (solid particles, gas bubbles) on the viscosity of slag ». Thesis, KTH, Mikro-modellering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-133495.
Texte intégralAlhasan, Ahmad Abdulraheem. « Low Temperature Characterization of Foamed Warm Mix Asphalt ». University of Akron / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=akron1374676401.
Texte intégralCHANG, CHIH-CHE, et 張誌哲. « Effect of Nucleating Agent on EVA Foaming Material under Supercritical Fluid Physical Foaming ». Thesis, 2017. http://ndltd.ncl.edu.tw/handle/ew7pz3.
Texte intégral逢甲大學
纖維與複合材料學系
105
In this study, using calcium carbonate, talc and white carbon black add to EVA, and studied its physical properties after foaming by supercritical fluid carbon dioxide, In view of the traditional chemical foaming system requires high temperature and a long time to achieve the complete reaction decomposition of chemical foaming agent,This experiment mainly uses less than the traditional chemical foaming of the processing temperature and time on different formulations to foaming it. By changing the amount of different powder added, discussion the effect of tensile strength, tear strength, elongation, density, expansion ratio, and surface hardness, under different content, the relationship between the expansion ratio and the above physical properties is also discussed, and the surface condition and cell structure were observed by optical microscope and SEM. The first step in this article use calcium carbonate, talc, white carbon black for the addition of different content, measure the relationship between the amount of change and the various physical properties, and then according to the different expansion ratio to explore its trend with a variety of physical properties and observing its surface structure and bubble structure in the same time. The second part is compare that the selection of calcium carbonate filled with 10 unit of the foam material and the EVA630 chemical foam materials that refer by literature, Compare the two similarities and differences. The results show that under supercritical fluid, foaming can be successfully performed at low temperature and low pressure, the comprehensive conditions and performance are better than ADC chemical foaming. The different nucleating agents also have different effects on the foamed material, filled with talc and white carbon black, both in tensile strength, tear strength, elongation properties, reinforcement effect and extension performance Comprehensive performance observation, mostly better than the calcium carbonate system, especially the addition of white carbon black in the tensile strength has especially good performance, Talc powder in the tear performance has a good cost-effective. No matter what kind of powder to add, the expansion ratio is negatively correlated with mechanical strength and surface hardness, has a positive correlation with elongation. Optical microscopy and SEM analysis of the observation can be seen that the addition of powder can significantly help the nucleation and growth of bubbles, among them, white carbon black system added to the material let the bubble to achieve the smallest and ideal case, but whether the material surface or internal observation, can be found reunion occurred.
Chapitres de livres sur le sujet "Physical foaming"
Li, Furong, Zhicheng Sun, Shouzheng Jiao, Zixiong Que, Xiaoyang Du, Ruping Liu, Siyu He, Shiyi Wang et Luhai Li. « Study on the Printability of Chemical and Physical Foaming Inks ». Dans Lecture Notes in Electrical Engineering, 675–81. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1864-5_92.
Texte intégralLakshmi, V. V. K., V. Arun Vikram, K. V. Subbaiah, K. Suresh et B. Surendra Babu. « Effect of Exfoliated Vermiculite as Thickening and Foaming Agent on the Physical Properties of Aluminium Foam ». Dans Advances in Applied Mechanical Engineering, 853–60. Singapore : Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-1201-8_91.
Texte intégralSun, Xiaowei, Miao Gao, Honghong Zhou, Jing Lv et Zhaoyang Ding. « Influence of Fiber on Properties of Graphite Tailings Foam Concrete ». Dans Lecture Notes in Civil Engineering, 508–15. Singapore : Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1260-3_46.
Texte intégralKoczo, Kalman, Mark D. Leatherman, Kevin Hughes et Don Knobloch. « Foaming Chemistry and Physics ». Dans Lubricant Additives, 337–84. Third edition. | Boca Raton : CRC Press, Taylor & Francis Group, 2017. : CRC Press, 2017. http://dx.doi.org/10.1201/9781315120621-19.
Texte intégralPlatikanov, D., V. N. Izmailova et G. P. Yampolskaya. « Physico-Chemical Background of the Foaming Protein Separation for Waste Minimization ». Dans Role of Interfaces in Environmental Protection, 507–20. Dordrecht : Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-010-0183-0_31.
Texte intégralDi Maio, Ernesto, Salvatore Iannace et Giuseppe Mensitieri. « Gas foaming with physical blowing agents ». Dans Supercritical Fluid Science and Technology, 33–54. Elsevier, 2021. http://dx.doi.org/10.1016/b978-0-444-63724-6.00002-0.
Texte intégralWypych, George. « EFFECT OF FOAMING ON PHYSICAL-MECHANICAL PROPERTIES OF FOAMS ». Dans Handbook of Foaming and Blowing Agents, 195–217. Elsevier, 2017. http://dx.doi.org/10.1016/b978-1-895198-99-7.50014-3.
Texte intégralWypych, George. « EFFECT OF FOAMING ON PHYSICAL-MECHANICAL PROPERTIES OF FOAMS ». Dans Handbook of Foaming and Blowing Agents, 231–60. Elsevier, 2022. http://dx.doi.org/10.1016/b978-1-77467-000-2.50015-7.
Texte intégralJerpdal, L., J. Hain et O. Täger. « Lightweight design for increased payload : new ways using polymer composites and physical foaming ». Dans Kunststoffe im Automobilbau 2017, 273–74. VDI Verlag, 2017. http://dx.doi.org/10.51202/9783182443476-273.
Texte intégralJerpdal, L., J. Hain et O. Täger. « Lightweight design for increased payload : new ways using polymer composites and physical foaming ». Dans Plastics in Automotive Engineering 2017, 259–60. VDI Verlag, 2017. http://dx.doi.org/10.51202/9783182443483-259.
Texte intégralActes de conférences sur le sujet "Physical foaming"
Petrossian, Gayaneh, et Amir Ameli. « Preparation of Highly Loaded Piezo-Composite Foams With High Expansion and Low Permittivity ». Dans ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/smasis2017-3807.
Texte intégralHopmann, Ch, C. Windeck, S. Hendriks, S. Zepnik et T. Wodke. « Extrusion foaming of thermoplastic cellulose acetate from renewable resources using a two-component physical blowing agent system ». Dans PROCEEDINGS OF PPS-29 : The 29th International Conference of the Polymer Processing Society - Conference Papers. American Institute of Physics, 2014. http://dx.doi.org/10.1063/1.4873746.
Texte intégralGuarino, S., et V. Tagliaferri. « Fabrication of Aluminium Foam Components by Using Powder Compact Melting Method ». Dans ASME 7th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2004. http://dx.doi.org/10.1115/esda2004-58607.
Texte intégralVISCUSI, A. « Experimental analysis of cold sprayed precursors for closed-cells aluminum foams ». Dans Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-6.
Texte intégralRizvi, Hussain R., et Nandika D'Souza. « Design of a Multifunctional Porous Coaxial Electrospun Mesh Using Polycaprolactone (PCL) and Poly Butylene Adipate-CO-Terephthalate (PBAT) ». Dans ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67534.
Texte intégralTampubolon, Grecy Kristina, Mukti Hamjah Harahap et Winsyah Putra. « Review of the Physical Properties of CLC Lightweight Concrete Using the Addition of Red Sand from Labuhan Batu Selatan ». Dans The 5th International Conference on Science and Technology Applications. Switzerland : Trans Tech Publications Ltd, 2024. http://dx.doi.org/10.4028/p-zd0pw0.
Texte intégralMarcano, Luis, Xiomara Santana Gutierrez, Beatriz Perez et Edward Martinez. « Effect of Some Physical-Chemical Variables on the Formation and Stability of Foam in Oil-Gas Systems and Their Correlation With the Formation of Foaming Crude Oil ». Dans Latin American and Caribbean Petroleum Engineering Conference. Society of Petroleum Engineers, 2009. http://dx.doi.org/10.2118/123060-ms.
Texte intégralRao, Jiajia. « Tuning plant protein for improved functionality and flavor profile : From field to application ». Dans 2022 AOCS Annual Meeting & Expo. American Oil Chemists' Society (AOCS), 2022. http://dx.doi.org/10.21748/xqxj4886.
Texte intégralZvada, Maiia Vladimirovna, Pavel Nikolaevich Belovus, Evgeny Ivanovich Sergeev, Nikolay Grigorevich Glavnov, Mikhail Alekseevich Varfolomeev et Emil Rinatovich Saifullin. « Study of the Efficiency of Gel and Polymer-Stabilized Foam Systems for Gas Shut-Off in Horizontal Wells ». Dans SPE Russian Petroleum Technology Conference. SPE, 2021. http://dx.doi.org/10.2118/206404-ms.
Texte intégralMohamad, Abdelrahman, Fouzia Khadraoui, Nassim Sebaibi, Mohamed Boutouil et Daniel Chateigner. « Water Sensitivity of Hemp-Foam Concrete ». Dans 4th International Conference on Bio-Based Building Materials. Switzerland : Trans Tech Publications Ltd, 2022. http://dx.doi.org/10.4028/www.scientific.net/cta.1.135.
Texte intégral